RND-MIB: View SNMP OID List / Download MIB

VENDOR: RND


 Home MIB: RND-MIB
Download as:   

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 rnd 1.3.6.1.4.1.89
       rndMng 1.3.6.1.4.1.89.1
           rndSysId 1.3.6.1.4.1.89.1.1 integer read-only
Identification of an RND device. The device type for each integer clarifies the sysObjectID in MIB - II. Enumeration: 'ogvan': 26, 'ogRubT': 29, 'xeb': 4, 'rtb': 7, 'ran': 15, 'openGate4': 14, 'ogRanTR': 19, 'prt': 41, 'elX': 30, 'fccs1004': 23, 'vanXS': 34, 'openGate2': 18, 'mlm': 42, 'fccs1012': 24, 'prt11': 43, 'itlb': 16, 'ftc': 21, 'armon': 22, 'iprouter': 10, 'rdapter': 25, 'lre': 35, 'leb': 12, 'ielb': 11, 'ceb': 2, 'vGate2Fast': 39, 'vGate2': 36, 'quickOffice': 44, 'vGate4': 31, 'reb': 1, 'openGate12': 13, 'serverDispatcher2': 38, 'apollo': 45, 'ceblb': 3, 'serverDispatcher4': 37, 'ogRubE': 28, 'gatelinx': 17, 'stc': 20, 'mrt': 32, 'serverDispatcher2Fast': 40, 'ogSrubET': 33, 'ltb': 8, 'wanGate': 27, 'lte': 9, 'xeb1': 5, 'rebsx': 6.
           rndAction 1.3.6.1.4.1.89.1.2 integer read-write
This variable enables the operator to perform one of the specified actions on the tables maintained by the network device. Send actions require support of proprietery File exchange protocol. Enumeration: 'reset': 1, 'backupLanTab': 15, 'deleteArpTab': 8, 'backupArpTab': 16, 'sendNetworkTab': 2, 'backupNetworkTab': 14, 'resetCDB': 19, 'sendRoutingTab': 4, 'deleteRoutingTab': 5, 'backupSPFRoutingTab': 12, 'sendArpTab': 9, 'deleteZeroHopRoutingAllocTab': 21, 'sendLanTab': 6, 'deleteRouteTab': 10, 'sendRouteTab': 11, 'backupIPRoutingTab': 13, 'backupIPXSAPTab': 18, 'deleteLanTab': 7, 'backupIPXRipTab': 17, 'deleteNetworkTab': 3, 'eraseCDB': 20.
           rndFileName 1.3.6.1.4.1.89.1.3 octet string read-write
The name of the file used internally by RND for transferring tables maintained by network devices, using a prorietary File exchange protocol.
       rndDeviceParams 1.3.6.1.4.1.89.2
           rndBridgeType 1.3.6.1.4.1.89.2.1 integer read-only
Identification of the RND bridge type. Enumeration: 'ogRubT': 43, 'xeb': 4, 'rtb': 7, 'ran': 34, 'openGate4': 33, 'ogRanTR': 38, 'openGate2': 37, 'ogVan': 40, 'itlb': 35, 'rete': 13, 'ceblb': 3, 'xtb': 11, 'reb': 1, 'rdapter': 39, 'lre': 46, 'leb': 31, 'ielb': 30, 'ceb': 2, 'vGate2': 48, 'vGate4': 45, 'openGate12': 32, 'wanGateI': 44, 'rtre': 10, 'ogRubE': 42, 'gatelinx': 36, 'mrt': 47, 'tre': 9, 'ltb': 8, 'wanGate': 41, 'ete': 12, 'xeb1': 5, 'rebsx': 6.
           rndInactiveArpTimeOut 1.3.6.1.4.1.89.2.2 integer read-write
This variable defines the maximum time period that can pass between ARP requests concerning an entry in the ARP table. After this time period, the entry is deleted from the table.
           rndBridgeAlarm 1.3.6.1.4.1.89.2.3
               rndErrorDesc 1.3.6.1.4.1.89.2.3.1 displaystring read-only
A textual description of the enterprise-specific trap sent to the Network Management Station by the RND managed device.
               rndErrorSeverity 1.3.6.1.4.1.89.2.3.2 integer read-only
The severity type of the enterprise-specific trap sent to the Network Management Station by the RND managed device.
           rndBrgVersion 1.3.6.1.4.1.89.2.4 displaystring read-only
The bridge version.
           rndBrgFeatures 1.3.6.1.4.1.89.2.5 octet string read-only
A bit mask that defines the features supported by a particular configuration of this network element: __________________________________________ | Byte 1|Byte 2 |Byte 3 | ....|Byte 20 | |87654321| | 87654321| |________|_______________________________| Byte1 : bit1: TX Block mask bit2: Source Routing Encapulation bit3: SNA/SDLC bit4: Frame Relay bit5: SNMP bit6: LAN Manager bit7: High Performance bit8: Translation Byte2 : bit1: DEC Router bit2: IPX Router bit3: IP Router Byte3 : bit1: Dial Up Backup bit2: COD bit3: FACS bit4: Load Balance bit5: Remote Configuration bit6: RIP 2 bit7: OSPF bit8: IPX RIP/SAP Filter Byte4 : bit1: BootP Server bit2: BootP Client bit3: Compression bit4: V25.bis bit5: ISDN bit6: CODv2 bit7: NSPF bit8: UDP Relay Byte5 bit1:VirtualLAN bit2:Static IP Multicast bit3:IP Redundancy bit4:CCM2 bit5:ISDN Bonding bit6:Backup Link Selection -- for the VAN/Rdapter ver 4.0 bit7:IP/IPX Forwarding -- for the WANgate ver 4.0 bit8:Improved COD Byte6 bit1: Server Disptacher bit2: ISDN_US -- for the VANSX/WANGATE ver 5.0 bit3: PPP bit4: IP Rip Filter -- for Vgate3 bit5: Zero Hop Routing -- for Vgate3 bit6: ISDN Japan Byte7 bit1: With unmanaged Switch bit2: 2 LANs bit3: OSPF Ver 2.0 bit4: FACS Ver 2.0 bit5: Multiple WEB Farm bit6: Backup Server
           rndBrgLicense 1.3.6.1.4.1.89.2.6 octet string read-write
This parameter is used for entering a s/w license number for a device. A separate license number is supplied for each device.
           rndIpHost 1.3.6.1.4.1.89.2.7
               rndICMPTransmitionEnable 1.3.6.1.4.1.89.2.7.1 integer read-write
This variable controlls the ability to transmit ICMP frames Enumeration: 'enable': 1, 'disable': 2.
               rndCommunityTable 1.3.6.1.4.1.89.2.7.2 no-access
The community table of the agent
                   rndCommunityEntry 1.3.6.1.4.1.89.2.7.2.1 no-access
The row definition for this table.
                       rndCommunityMngStationAddr 1.3.6.1.4.1.89.2.7.2.1.1 ipaddress read-write
The management station that will be allowed to communicate with the agent IP address
                       rndCommunityString 1.3.6.1.4.1.89.2.7.2.1.2 displaystring read-write
The community string with which the management station will communicate with the agent
                       rndCommunityAccess 1.3.6.1.4.1.89.2.7.2.1.3 integer read-write
The allowed access to this management station Enumeration: 'readWrite': 2, 'readOnly': 1, 'super': 3.
                       rndCommunityTrapsEnable 1.3.6.1.4.1.89.2.7.2.1.4 integer read-write
Should the agent send traps to the management station Enumeration: 'trapsDisable': 2, 'trapsEnable': 1.
                       rndCommunityStatus 1.3.6.1.4.1.89.2.7.2.1.5 integer read-write
The status of this entry. If the status is invalid the community entry will be deleted Enumeration: 'enable': 1, 'invalid': 2.
           rndManagedTime 1.3.6.1.4.1.89.2.8 displaystring read-write
The time will be sent in the format hhmmss
           rndManagedDate 1.3.6.1.4.1.89.2.9 displaystring read-write
The date will be sent in the format ddmmyyyy
           genGroup 1.3.6.1.4.1.89.2.11
                 genGroupHWVersion 1.3.6.1.4.1.89.2.11.1 displaystring read-only
Defines the HW version of the product.
                 genGroupConfigurationSymbol 1.3.6.1.4.1.89.2.11.2 displaystring read-only
Defines the Configuration Symbol attached to any hardware module manufactured by LANNET. One single character A..Z defines the CS version.
                 genGroupHWStatus 1.3.6.1.4.1.89.2.11.3 integer read-only
This attribute describes the status of the group hardware as detected by the sensors software. Enumeration: 'hardwareProblems': 2, 'notSupported': 255, 'ok': 1.
       rndInterface 1.3.6.1.4.1.89.4
           rndIfTable 1.3.6.1.4.1.89.4.1 no-access
RND-specific interface table. Each table entry includes an index, Board number, Network Address, interface status, clock indicator and interface cost.
               rndIfEntry 1.3.6.1.4.1.89.4.1.1 no-access
The row definition for this table.
                   rndIfIndex 1.3.6.1.4.1.89.4.1.1.1 integer read-only
Index to the RND Interface Table. The interface defined by a particular value of this index is the same interface as identified by the same value of ifIndex (MIBII).
                   rndIfBoardNum 1.3.6.1.4.1.89.4.1.1.2 integer read-only
The interface defined by this entry correspTnds to the board defined by the same value of rndSlotBoardNum in the rndSlotTab.
                   rndIfNetAddress 1.3.6.1.4.1.89.4.1.1.3 ipaddress read-only
The IP address of the interface defined by the particular value of rndIfIndex.
                   rndIfStatus 1.3.6.1.4.1.89.4.1.1.4 integer read-only
The current status of the interface. Enumeration: 'okSingleBrg': 2, 't1Alarm': 9, 'ok': 1, 'rxClockFault': 8, 'okMultiBrg': 3, 'txFault': 6, 'connctFault': 4, 'rxFault': 5, 'channelLoopback': 7.
                   rndIfClockType 1.3.6.1.4.1.89.4.1.1.5 integer read-write
rndIfClockType defines the type of clock each interface uses: internal or external. Enumeration: 'g703': 4, 'internal': 2, 'external': 1, 't1': 3.
                   rndIfBaudRate 1.3.6.1.4.1.89.4.1.1.6 integer read-write
Defines the baud rate of use by the interface. The valid rates are determined by the type of the media for which this baud rate is defined.
                   rndIfCost 1.3.6.1.4.1.89.4.1.1.7 integer read-write
This variable assigns a transmission cost to the interface (channel or LAN). These costs are used in Level II routing. The costs aretypically inversly proportional to the channel quality.
                   rndIfCompression 1.3.6.1.4.1.89.4.1.1.8 integer read-write
Defines whether data compression is enabled or disabled for the interface. Enumeration: 'enable': 1, 'disable': 2.
                   rndIfCompressionStatus 1.3.6.1.4.1.89.4.1.1.9 integer read-only
Defines the status of the compression component: not-inserted - Compression component is not in the device active - Compression is enabled and operates correctly not-active - Compression is enables but does not operate. The reason may be that there is no compression component on the device connected to this interface. disabled - Compression was disabled by management, using variable rndCompression. Enumeration: 'active': 2, 'not-active': 3, 'disable': 4, 'not-inserted': 1.
                   rndIfCompressionRate 1.3.6.1.4.1.89.4.1.1.10 integer read-only
Percentage of compression. This variable applies only if rndCompressionStatus is active.
                   rndIfLATCompression 1.3.6.1.4.1.89.4.1.1.11 integer read-write
Enable/Disable the LAT Compression. Enumeration: 'enable': 1, 'disable': 2.
                   rndIfCompressionType 1.3.6.1.4.1.89.4.1.1.12 integer read-only
This parameter indicates the type of compression option available in the device. none(1) - indicates that there is no compression option in the device lowSpeed(2) - indicates a compression option which is operational up to line speed sof 64 kbps. highSpeed(3)- indicates a compression option which is operational up to line speeds of 2 Mbps. Enumeration: 'none': 1, 'highSpeed': 3, 'lowSpeed': 2.
                   rndIfFilterMode 1.3.6.1.4.1.89.4.1.1.13 integer read-write
This parameter indicates the type of filtering in the device. Enumeration: 'destinationOnly': 1, 'sourceAndDestination': 2, 'none': 3.
                   rndIfChannelType 1.3.6.1.4.1.89.4.1.1.14 integer read-write
The type of the WAN channel Enumeration: 'wanChannel': 1, 'lan': 7, 'spsX25': 8, 'frameRelayCAR': 11, 'frameRelay1490CAR': 10, 'frameRelay1490': 9, 'spsFramRelay': 4, 'ogRanPort': 2, 'ppp': 12, 'dialBackup': 5, 'routerToBridge': 3, 'snar': 6.
                   rndIfBridge 1.3.6.1.4.1.89.4.1.1.15 integer read-write
This variable indicates whether this interface forward Layer II pakages. Enumeration: 'enable': 1, 'disable': 2.
                   rndHighPriorityIf 1.3.6.1.4.1.89.4.1.1.16 integer read-write
This variable indicates whether this interface will forward pakages that fit HighPriority set by the manager. Enumeration: 'enable': 1, 'disable': 2.
                   rndWanHeader 1.3.6.1.4.1.89.4.1.1.17 integer read-write
This variable indicates the RND WAN header type used for frames which pass through this interface. 'regular' specifies a 14 bytes header compatible with older OG versions and 'short' a 4 byte header compatible with the RND adapter product family. Enumeration: 'regular': 1, 'short': 2.
                   rndDuplexMode 1.3.6.1.4.1.89.4.1.1.18 integer read-write
This variable indicates whether this interface operates in half duplex full duplex or auto negotiation mode. Enumeration: 'full': 2, 'half': 1.
       rndIPX 1.3.6.1.4.1.89.12
             rndIPXdriver 1.3.6.1.4.1.89.12.1
             rndIPXRip 1.3.6.1.4.1.89.12.2
                 rndIPXRipFilterGlbTable 1.3.6.1.4.1.89.12.2.10 no-access
The table of RIP global filters per IPX router.
                       rndIPXRipFilterGlbEntry 1.3.6.1.4.1.89.12.2.10.1 no-access
An entry in the RIP global filter table
                           rndIPXRipFilterGlbFLtype 1.3.6.1.4.1.89.12.2.10.1.1 integer read-only
Type of filter - input/output Enumeration: 'input': 1, 'output': 2.
                           rndIPXRipFilterGlbFLnumber 1.3.6.1.4.1.89.12.2.10.1.2 integer read-only
Number of RIP filter.
                           rndIPXRipFilterGlbFLStatus 1.3.6.1.4.1.89.12.2.10.1.3 integer read-write
The validity of this entry. An entry with this value set to invalid may be deleted from the table with IPX implementation's discretion. Enumeration: 'underCreation': 3, 'valid': 1, 'invalid': 2.
                           rndIPXRipFilterGlbFLnetworkPatern 1.3.6.1.4.1.89.12.2.10.1.4 octet string read-write
Number of filtered network. Value 0xFFFFFFFF applies for any network.
                           rndIPXRipFilterGlbFLnetworkMask 1.3.6.1.4.1.89.12.2.10.1.5 octet string read-write
Network mask
                           rndIPXRipFilterGlbFLaction 1.3.6.1.4.1.89.12.2.10.1.6 integer read-write
Filter action - permit/deny for this network Enumeration: 'deny': 1, 'permit': 2.
                 rndIPXRipFilterCircuitTable 1.3.6.1.4.1.89.12.2.11 no-access
Table of input/output RIP filters used per IPX circuit number.
                       rndIPXRipFilterCircuitEntry 1.3.6.1.4.1.89.12.2.11.1 no-access
An entry in the Circuit RIP filter table
                           rndIPXRipFilterCircFLIfIndex 1.3.6.1.4.1.89.12.2.11.1.1 integer read-only
The Interface identifier for this filter. This value correspond to rndIPXIfIndex or ipxCircIndex for ET16
                           rndIPXRipFilterCircFLType 1.3.6.1.4.1.89.12.2.11.1.2 integer read-only
Type of filter - input/output Enumeration: 'input': 1, 'output': 2.
                           rndIPXRipFilterCircFLnumber 1.3.6.1.4.1.89.12.2.11.1.3 integer read-only
Number of RIP filter for this circuit
                           rndIPXRipFilterCircFLStatus 1.3.6.1.4.1.89.12.2.11.1.4 integer read-write
The validity of this entry. An entry with this value set to invalid may be deleted from the table with IPX implementation's discretion. Enumeration: 'underCreation': 3, 'valid': 1, 'invalid': 2.
                           rndIPXRipFilterCircFLnetworkPatern 1.3.6.1.4.1.89.12.2.11.1.5 octet string read-write
Number of filtered network. Value 0xFFFFFFFF applies for any network.
                           rndIPXRipFilterCircFLnetworkMask 1.3.6.1.4.1.89.12.2.11.1.6 octet string read-write
Network mask
                           rndIPXRipFilterCircFLaction 1.3.6.1.4.1.89.12.2.11.1.7 integer read-write
Filter action - permit/deny Enumeration: 'deny': 1, 'permit': 2.
             rndIPXSap 1.3.6.1.4.1.89.12.3
                 rndIPXSapFilterGlbTable 1.3.6.1.4.1.89.12.3.10 no-access
The table of SAP global filter susedper IPX router.
                       rndIPXSapFilterGlbEntry 1.3.6.1.4.1.89.12.3.10.1 no-access
An entry in the SAP global filter table
                           rndIPXSapFilterGlbFLtype 1.3.6.1.4.1.89.12.3.10.1.1 integer read-only
Type of filter-input/output Enumeration: 'input': 1, 'output': 2.
                           rndIPXSapFilterGlbFLnumber 1.3.6.1.4.1.89.12.3.10.1.2 integer read-only
Number of SAP filter.
                           rndIPXSapFilterGlbFLStatus 1.3.6.1.4.1.89.12.3.10.1.3 integer read-write
The validity of this entry. An entry with this value set to invalid may be deleted from the table with IPX implementation's discretion. Enumeration: 'underCreation': 3, 'valid': 1, 'invalid': 2.
                           rndIPXSapFilterGlbFLnetworkPatern 1.3.6.1.4.1.89.12.3.10.1.4 octet string read-write
Number network of the filter edservice. Value 0xFFFFFFFF applies for any network.
                           rndIPXSapFilterGlbFLnetworkMask 1.3.6.1.4.1.89.12.3.10.1.5 octet string read-write
Network mask
                           rndIPXSapFilterGlbFLserviceType 1.3.6.1.4.1.89.12.3.10.1.6 integer read-write
The type of the service which may be filtered ;value0xFFFF applies for all types of service and it's default
                           rndIPXSapFilterGlbFLserviceName 1.3.6.1.4.1.89.12.3.10.1.7 octet string read-write
The name of the service which may be filtered; wild cardas * may be used in end of the name.
                           rndIPXSapFilterGlbFLaction 1.3.6.1.4.1.89.12.3.10.1.8 integer read-write
Filter mode - permit/deny for this service Enumeration: 'deny': 1, 'permit': 2.
                 rndIPXSapFilterCircuitTable 1.3.6.1.4.1.89.12.3.11 no-access
Table of input/output SAP filter susedper IPX circuit number.
                       rndIPXSapFilterCircuitEntry 1.3.6.1.4.1.89.12.3.11.1 no-access
An entry in the Circuit SAP filter table
                           rndIPXSapFilterCircFLIfIndex 1.3.6.1.4.1.89.12.3.11.1.1 integer read-only
The Interface identifier for this filter. This value correspondtornd IPXIfIndex or ipxCircIndex for ET16
                           rndIPXSapFilterCircFLtype 1.3.6.1.4.1.89.12.3.11.1.2 integer read-only
Type of filter-input/output Enumeration: 'input': 1, 'output': 2.
                           rndIPXSapFilterCircFLnumber 1.3.6.1.4.1.89.12.3.11.1.3 integer read-only
Number of SAP filter. Th is value correspondto rndIPXSapFilterNumber
                           rndIPXSapFilterCircFLStatus 1.3.6.1.4.1.89.12.3.11.1.4 integer read-write
The validity of this entry. An entry with this value set to invalid may be deleted from the table with IPX implementation's discretion. Enumeration: 'underCreation': 3, 'valid': 1, 'invalid': 2.
                           rndIPXSapFilterCircFLnetworkPatern 1.3.6.1.4.1.89.12.3.11.1.5 octet string read-write
Number network of the filtered service. Value 0xFFFFFFFF applies for any network.
                           rndIPXSapFilterCircFLnetworkMask 1.3.6.1.4.1.89.12.3.11.1.6 octet string read-write
Network mask
                           rndIPXSapFilterCircFLserviceType 1.3.6.1.4.1.89.12.3.11.1.7 integer read-write
The type of the service which may be filtered; value 0xFFFF applies for all types of service and it's default
                           rndIPXSapFilterCircFLserviceName 1.3.6.1.4.1.89.12.3.11.1.8 octet string read-write
The name of the service which may be filtered; wild cardas * may be used i n end of the name.
                           rndIPXSapFilterCircFLaction 1.3.6.1.4.1.89.12.3.11.1.9 integer read-write
Filter mode-permit/deny Enumeration: 'deny': 1, 'permit': 2.
             ipxSystem 1.3.6.1.4.1.89.12.4
                 ipxBasicSysTable 1.3.6.1.4.1.89.12.4.1 no-access
The IPX System table - basic information.
                     ipxBasicSysEntry 1.3.6.1.4.1.89.12.4.1.1 no-access
Each entry corresponds to one instance of IPX running on the system.
                         ipxBasicSysInstance 1.3.6.1.4.1.89.12.4.1.1.1 integer read-write
The unique identifier of the instance of IPX to which this row corresponds. This value may be written only when creating a new entry in the table.
                         ipxBasicSysExistState 1.3.6.1.4.1.89.12.4.1.1.2 integer read-write
The validity of this entry in the IPX system table. Setting this field to off indicates that this entry may be deleted from the system table at the IPX implementation's discretion. Enumeration: 'on': 2, 'off': 1.
                         ipxBasicSysInReceives 1.3.6.1.4.1.89.12.4.1.1.3 counter read-only
The total number of IPX packets received, including those received in error.
                         ipxBasicSysInHdrErrors 1.3.6.1.4.1.89.12.4.1.1.4 counter read-only
The number of IPX packets discarded due to errors in their headers, including any IPX packet with a size less than the minimum of 30 bytes.
                         ipxBasicSysInUnknownSockets 1.3.6.1.4.1.89.12.4.1.1.5 counter read-only
The number of IPX packets discarded because the destination socket was not open.
                         ipxBasicSysInDiscards 1.3.6.1.4.1.89.12.4.1.1.6 counter read-only
The number of IPX packets received but discarded due to reasons other than those accounted for by ipxBasicSysInHdrErrors, ipxBasicSysInUnknownSockets, ipxAdvSysInDiscards, and ipxAdvSysInCompressDiscards.
                         ipxBasicSysInDelivers 1.3.6.1.4.1.89.12.4.1.1.7 counter read-only
The total number of IPX packets delivered locally, including packets from local applications.
                         ipxBasicSysNoRoutes 1.3.6.1.4.1.89.12.4.1.1.8 counter read-only
The number of times no route to a destination was found.
                         ipxBasicSysOutRequests 1.3.6.1.4.1.89.12.4.1.1.9 counter read-only
The number of IPX packets supplied locally for transmission, not including any packets counted in ipxAdvForwPackets.
                         ipxBasicSysOutMalformedRequests 1.3.6.1.4.1.89.12.4.1.1.10 counter read-only
The number of IPX packets supplied locally that contained errors in their structure.
                         ipxBasicSysOutDiscards 1.3.6.1.4.1.89.12.4.1.1.11 counter read-only
The number of outgoing IPX packets discarded due to reasons other than those accounted for in ipxBasicSysOutMalformedRequests, ipxAdvSysOutFiltered, and ipxAdvSysOutCompressDiscards.
                         ipxBasicSysOutPackets 1.3.6.1.4.1.89.12.4.1.1.12 counter read-only
The total number of IPX packets transmitted.
             ipxCircuit 1.3.6.1.4.1.89.12.5
                 ipxCircTable 1.3.6.1.4.1.89.12.5.1 no-access
The Circuit table.
                     ipxCircEntry 1.3.6.1.4.1.89.12.5.1.1 no-access
Each entry corresponds to one circuit known to the system.
                         ipxCircSysInstance 1.3.6.1.4.1.89.12.5.1.1.1 integer read-write
The unique identifier of the instance of IPX to which this entry corresponds. This value may be written only when creating a new entry in the table.
                         ipxCircIndex 1.3.6.1.4.1.89.12.5.1.1.2 integer read-write
The identifier of this circuit, unique within the instance of IPX. This value may be written only when creating a new entry in the table.
                         ipxCircExistState 1.3.6.1.4.1.89.12.5.1.1.3 integer read-write
The validity of this circuit entry. A circuit with this value set to off may be deleted from the table at the IPX implementation's discretion. Enumeration: 'on': 2, 'off': 1, 'sleeping': 3.
                         ipxCircOperState 1.3.6.1.4.1.89.12.5.1.1.4 integer read-only
The operational state of the circuit. Enumeration: 'down': 1, 'up': 2.
                         ipxCircIfIndex 1.3.6.1.4.1.89.12.5.1.1.5 integer read-write
The value of ifIndex for the interface used by this circuit. This value may be written only when creating a new entry in the table.
                         ipxCircNetNumber 1.3.6.1.4.1.89.12.5.1.1.6 netnumber read-write
The IPX network number of this circuit. This value may be written only when creating a new entry in the table.
                         ipxCircTimeToNet 1.3.6.1.4.1.89.12.5.1.1.7 integer read-write
The time to net value associated with this interface, in term of 1/18ths of a second.
                         ipxCircEncaps 1.3.6.1.4.1.89.12.5.1.1.8 integer read-write
The encapsulation method associated with this interface. Enumeration: 'novell': 1, 'ethernet': 2, 'none': 10, 'llc': 3, 'snap': 4.
                         ipxCircNetbiosDeliver 1.3.6.1.4.1.89.12.5.1.1.9 integer read-write
Deliver NetBios All Networks Broadcast Packets Enumeration: 'disabled': 2, 'enabled': 1.
             ipxForwarding 1.3.6.1.4.1.89.12.6
                 ipxDestTable 1.3.6.1.4.1.89.12.6.1 no-access
The Destination table contains information about all known destinations.
                     ipxDestEntry 1.3.6.1.4.1.89.12.6.1.1 no-access
Each entry corresponds to one destination.
                         ipxDestSysInstance 1.3.6.1.4.1.89.12.6.1.1.1 integer read-only
The unique identifier of the instance of IPX to which this row corresponds.
                         ipxDestNetNum 1.3.6.1.4.1.89.12.6.1.1.2 netnumber read-only
The IPX network number of the destination.
                         ipxDestNextHopCircIndex 1.3.6.1.4.1.89.12.6.1.1.3 integer read-write
The unique identifier of the circuit used to reach the next hop.
                         ipxDestProtocol 1.3.6.1.4.1.89.12.6.1.1.4 integer read-only
The routing protocol from which knowledge of this destination was obtained. Enumeration: 'static': 5, 'other': 1, 'local': 2, 'rip': 3, 'nlsp': 4.
                         ipxDestTicks 1.3.6.1.4.1.89.12.6.1.1.5 integer read-write
The delay in ticks to reach this destination.
                         ipxDestHopCount 1.3.6.1.4.1.89.12.6.1.1.6 integer read-write
The number of hops necessary to reach the destination.
                         ipxDestNextHopNICAddress 1.3.6.1.4.1.89.12.6.1.1.7 physaddress read-write
The NIC address of the next hop.
                         ipxDestNextHopNetNum 1.3.6.1.4.1.89.12.6.1.1.8 netnumber read-write
The IPX network number of the next hop.
                         ipxDestExistState 1.3.6.1.4.1.89.12.6.1.1.9 integer read-write
The validity of this entry. An entry with this value set to off may be deleted from the table at the IPX implementation's discretion. Enumeration: 'on': 2, 'off': 1.
             ipxServices 1.3.6.1.4.1.89.12.7
                 ipxServTable 1.3.6.1.4.1.89.12.7.1 no-access
The table of services, indexed by name and type.
                     ipxServEntry 1.3.6.1.4.1.89.12.7.1.1 no-access
Each entry corresponds to one service.
                         ipxServSysInstance 1.3.6.1.4.1.89.12.7.1.1.1 integer read-only
The unique identifier of the instance of IPX to which this entry corresponds.
                         ipxServType 1.3.6.1.4.1.89.12.7.1.1.2 octet string read-write
The service type.
                         ipxServName 1.3.6.1.4.1.89.12.7.1.1.3 octet string read-write
The service name.
                         ipxServProtocol 1.3.6.1.4.1.89.12.7.1.1.4 integer read-only
The protocol from which knowledge of this service was obtained. Enumeration: 'static': 5, 'other': 1, 'local': 2, 'sap': 6, 'nlsp': 4.
                         ipxServNetNum 1.3.6.1.4.1.89.12.7.1.1.5 netnumber read-write
The IPX network number portion of the IPX address of the service.
                         ipxServNode 1.3.6.1.4.1.89.12.7.1.1.6 octet string read-write
The node portion of the IPX address of the service.
                         ipxServSocket 1.3.6.1.4.1.89.12.7.1.1.7 octet string read-write
The socket portion of the IPX address of the service.
                         ipxServHopCount 1.3.6.1.4.1.89.12.7.1.1.8 integer read-write
The number of hops to the service.
                         ipxServExistState 1.3.6.1.4.1.89.12.7.1.1.9 integer read-write
The validity of this entry. An entry with this value set to off may be deleted from the table at the IPX implementation's discretion. Enumeration: 'on': 2, 'off': 1.
             ripsap 1.3.6.1.4.1.89.12.8
                 ripsapSystem 1.3.6.1.4.1.89.12.8.1
                     ripSysTable 1.3.6.1.4.1.89.12.8.1.1 no-access
The RIP system table.
                         ripSysEntry 1.3.6.1.4.1.89.12.8.1.1.1 no-access
Each entry corresponds to one instance of RIP running on the system.
                             ripSysInstance 1.3.6.1.4.1.89.12.8.1.1.1.1 integer read-write
The unique identifier of the instance of RIP to which this row corresponds. This value links the instance of RIP to an instance of IPX running on the system (i.e. the value of ripSysInstance should be the same as a value of ipxSysInstance). This value may be written only when creating a new entry in the table.
                             ripSysState 1.3.6.1.4.1.89.12.8.1.1.1.2 integer read-write
Indicates the operational state of this instance of RIP. Enumeration: 'on': 2, 'off': 1.
                             ripSysIncorrectPackets 1.3.6.1.4.1.89.12.8.1.1.1.3 counter read-only
The number of times that an incorrectly formatted RIP packet was received.
                     sapSysTable 1.3.6.1.4.1.89.12.8.1.2 no-access
The SAP system table.
                         sapSysEntry 1.3.6.1.4.1.89.12.8.1.2.1 no-access
Each entry corresponds to one instance of SAP running on the system.
                             sapSysInstance 1.3.6.1.4.1.89.12.8.1.2.1.1 integer read-write
The unique identifier of the instance of SAP to which this row corresponds. This value links the instance of SAP to an instance of IPX running on the system (i.e. the value of SApSysInstance should be the same as a value of ipxSysInstance). This value may be written only when creating a new entry in the table.
                             sapSysState 1.3.6.1.4.1.89.12.8.1.2.1.2 integer read-only
Indicates the operational state of this instance of SAP. Enumeration: 'on': 2, 'off': 1.
                             sapSysIncorrectPackets 1.3.6.1.4.1.89.12.8.1.2.1.3 counter read-only
The number of times that an incorrectly formatted SAP packet was received.
                 ripsapCircuit 1.3.6.1.4.1.89.12.8.2
                     ripCircTable 1.3.6.1.4.1.89.12.8.2.1 no-access
The RIP Circuit table.
                         ripCircEntry 1.3.6.1.4.1.89.12.8.2.1.1 no-access
Each entry corresponds to one circuit known to the system.
                             ripCircSysInstance 1.3.6.1.4.1.89.12.8.2.1.1.1 integer read-write
The unique identifier of the instance of RIP and IPX (via ipxSysInstance) to which this entry corresponds. This value may be written only when creating a new entry in the table.
                             ripCircIndex 1.3.6.1.4.1.89.12.8.2.1.1.2 integer read-write
The identifier of this circuit, unique within the instance of RIP. This value corresponds to the circuit identifier found in ipxCircIndex. This value may be written only when creating a new entry in the table.
                             ripCircState 1.3.6.1.4.1.89.12.8.2.1.1.3 integer read-write
Indicates whether RIP information may be sent/received over this circuit. Enumeration: 'on': 2, 'off': 1.
                             ripCircUpdate 1.3.6.1.4.1.89.12.8.2.1.1.4 integer read-write
The RIP periodic update interval, in seconds.
                             ripCircAgeMultiplier 1.3.6.1.4.1.89.12.8.2.1.1.5 integer read-write
The holding multiplier for information received in RIP periodic updates.
                             ripCircOutPackets 1.3.6.1.4.1.89.12.8.2.1.1.6 counter read-only
The number of RIP packets sent on this circuit.
                             ripCircInPackets 1.3.6.1.4.1.89.12.8.2.1.1.7 counter read-only
The number of RIP packets received on this circuit.
                     sapCircTable 1.3.6.1.4.1.89.12.8.2.2 no-access
The SAP Circuit table.
                         sapCircEntry 1.3.6.1.4.1.89.12.8.2.2.1 no-access
Each entry corresponds to one circuit known to the system.
                             sapCircSysInstance 1.3.6.1.4.1.89.12.8.2.2.1.1 integer read-write
The unique identifier of the instance of SAP and IPX (via ipxSysInstance) to which this entry corresponds. This value may be written only when creating a new entry in the table.
                             sapCircIndex 1.3.6.1.4.1.89.12.8.2.2.1.2 integer read-write
The identifier of this circuit, unique within the instance of SAP. This value corresponds to the circuit identifier found in ipxCircIndex. This value may be written only when creating a new entry in the table.
                             sapCircState 1.3.6.1.4.1.89.12.8.2.2.1.3 integer read-write
Indicates whether SAP information may be sent/received over this circuit. Enumeration: 'on': 2, 'off': 1.
                             sapCircUpdate 1.3.6.1.4.1.89.12.8.2.2.1.4 integer read-write
The SAP periodic update interval, in seconds.
                             sapCircAgeMultiplier 1.3.6.1.4.1.89.12.8.2.2.1.5 integer read-write
The holding multiplier for information received in SAP periodic updates.
                             sapCircGetNearestServerReply 1.3.6.1.4.1.89.12.8.2.2.1.6 integer read-write
Indicates whether to respond to SAP get nearest server requests received on this circuit. Enumeration: 'yes': 2, 'no': 1.
                             sapCircOutPackets 1.3.6.1.4.1.89.12.8.2.2.1.7 counter read-only
The number of SAP packets sent on this circuit.
                             sapCircInPackets 1.3.6.1.4.1.89.12.8.2.2.1.8 counter read-only
The number of SAP packets received on this circuit.
       rndFACS 1.3.6.1.4.1.89.16
             rndFACSDefaultAction 1.3.6.1.4.1.89.16.1 integer read-write
Used to define the default action for the device, when no FACS statements applicable to a given frame are defined. Enumeration: 'forward': 2, 'blockAndReport': 129, 'enable': 3, 'disable': 4, 'block': 1.
             rndFACSActTable 1.3.6.1.4.1.89.16.2 no-access
The table of FACS action.
                 rndFACSActEntry 1.3.6.1.4.1.89.16.2.1 no-access
Each rndFACSActEntry consist of the following parameters
                     rndFACSActType 1.3.6.1.4.1.89.16.2.1.1 integer read-only
This parameter indicate on which FACS Table the FACS action will preform. Enumeration: 'activeDB': 4, 'tempDB': 5, 'rx': 2, 'tx': 1.
                     rndFACSActIfIndex 1.3.6.1.4.1.89.16.2.1.2 integer read-only
The interface to which this FACS entry is applicable.
                     rndFACSAction 1.3.6.1.4.1.89.16.2.1.3 integer read-write
The management station that sends a SET request for one of these actions with indexes rndFACSType and rndFACSIfIndex defines the type and the interface Id for which all FACS statements are to be erased. If no interface or no type is specified, all FACS statements for a protocol are erased. Enumeration: 'none': 1, 'eraseIPX': 4, 'backupBrg': 13, 'replaceIP': 6, 'eraseDECnet': 3, 'backupIP': 10, 'eraseIP': 2, 'replaceBrg': 9, 'eraseBrg': 5, 'replaceIPX': 8, 'backupIPX': 12.
             rndFACSTable 1.3.6.1.4.1.89.16.3 no-access
The table of FACS statment.
                 rndFACSEntry 1.3.6.1.4.1.89.16.3.1 no-access
Each FACS statment consist of the following parameters
                     rndFACSIfIndex 1.3.6.1.4.1.89.16.3.1.1 integer read-only
The interface to which this FACS entry is applicable.
                     rndFACSProtocolType 1.3.6.1.4.1.89.16.3.1.2 integer read-only
This parameter define the protocol the Security Access Control is applicable. Enumeration: 'ip': 1, 'ipx': 2, 'dec': 3, 'bridge': 4.
                     rndFACSType 1.3.6.1.4.1.89.16.3.1.3 integer read-only
The Mode of in which this FACS statement operates. Enumeration: 'activeDB': 4, 'tempDB': 5, 'rx': 2, 'cod': 3, 'tx': 1.
                     rndFACSIndex 1.3.6.1.4.1.89.16.3.1.4 integer read-only
Index to the FACS Table.
                     rndFACSSrcAdd 1.3.6.1.4.1.89.16.3.1.5 octet string read-write
The size of the octet string will be according to the protocol type define in rndFACSProtocolType.
                     rndFACSSrcAddMask 1.3.6.1.4.1.89.16.3.1.6 octet string read-write
Source-address mask .
                     rndFACSDesAdd 1.3.6.1.4.1.89.16.3.1.7 octet string read-write
Destination-address The size of the octet string will be according to the protocol type define in rndFACSProtocolType .
                     rndFACSDesAddMask 1.3.6.1.4.1.89.16.3.1.8 octet string read-write
Destination-address mask .
                     rndFACSOperation 1.3.6.1.4.1.89.16.3.1.9 integer read-write
... . Enumeration: 'deny': 4, 'blockZHRP': 5, 'blockAndReport': 129, 'permit': 3, 'forward': 2, 'block': 1.
                     rndFACSNetFiltering 1.3.6.1.4.1.89.16.3.1.10 integer read-write
... . Enumeration: 'arp': 3, 'none': 1, 'ip': 5, 'udp': 6, 'tcp': 7, 'l2multicast': 2, 'decnet': 8, 'ipx': 9, 'icmp': 4.
                     rndFACSSoketNum 1.3.6.1.4.1.89.16.3.1.11 integer read-write
Port/socket number for different applications 0 is default meaning not applicable.
                     rndFACSMask1Id 1.3.6.1.4.1.89.16.3.1.12 integer read-write
Index into RND mask table FACS/COD Type) .
                     rndFACSMask2Id 1.3.6.1.4.1.89.16.3.1.13 integer read-write
Index into RND mask table FACS/COD according to the value of rndFACSType .
                     rndFACSStatus 1.3.6.1.4.1.89.16.3.1.14 integer read-write
The status of a table entry. Enumeration: 'underCreation': 3, 'createRequest': 2, 'valid': 1, 'invalid': 4.
       rndBootP 1.3.6.1.4.1.89.24
             rndBootPServerAddress 1.3.6.1.4.1.89.24.1 ipaddress read-write
The IPAddress of the BOOTP server. the OpenGate will act as a BootP relay if this parameter is not equale to 0.0.0.0.
             rndBootPRelaySecThreshold 1.3.6.1.4.1.89.24.2 integer read-write
BootP requests are relayed only if their SEC field is greater or equal to the threshold value in order to allow local BootP Servers to answer first.
       ipSpec 1.3.6.1.4.1.89.26
             rsIpAddrTable 1.3.6.1.4.1.89.26.1 no-access
This table is parralel to MIB II IpAddrTable, and is used to add/delete entries to/from that table. In addition it contains private objects.
                 rsIpAddrEntry 1.3.6.1.4.1.89.26.1.1 no-access
The addressing information for one of this entity's IP addresses.
                     rsIpAdEntAddr 1.3.6.1.4.1.89.26.1.1.1 ipaddress read-only
The IP address to which this entry's addressing information pertains.
                     rsIpAdEntIfIndex 1.3.6.1.4.1.89.26.1.1.2 integer read-write
The index value which uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.
                     rsIpAdEntNetMask 1.3.6.1.4.1.89.26.1.1.3 ipaddress read-write
The subnet mask associated with the IP address of this entry. The value of the mask is an IP address with all the network bits set to 1 and all the hosts bits set to 0.
                     rsIpAdEntForwardIpBroadcast 1.3.6.1.4.1.89.26.1.1.4 integer read-write
This variable controls forwarding of IP (sub)net-directed broadcasts destined for an attached sub(net). Enumeration: 'enable': 1, 'disable': 2.
                     rsIpAdEntBackupAddr 1.3.6.1.4.1.89.26.1.1.5 ipaddress read-write
                     rsIpAdEntStatus 1.3.6.1.4.1.89.26.1.1.6 integer read-write
The validity of this entry. Invalid indicates that this entry is invalid in IpAddrTable (MIB II). Enumeration: 'valid': 1, 'invalid': 2.
                     rsIpAdEntBcastAddr 1.3.6.1.4.1.89.26.1.1.7 integer read-write
Indicates how the host part of ip subnet broadcast messages will be filled: 0 - host part will be filled by 0 1 - host part will be filled by 1.
             icmpSpec 1.3.6.1.4.1.89.26.2
                 rsIcmpGenErrMsgEnable 1.3.6.1.4.1.89.26.2.1 integer read-write
This variable controlls the ability to generate ICMP error messages Enumeration: 'enable': 1, 'disable': 2.
                 rsIcmpRdTable 1.3.6.1.4.1.89.26.2.2 no-access
This table contains ICMP Router Discovery parameters configurated per IP interface.
                     rsIcmpRdEntry 1.3.6.1.4.1.89.26.2.2.1 no-access
The ICMP parameters configurated for IP interface.
                         rsIcmpRdIpAddr 1.3.6.1.4.1.89.26.2.2.1.1 ipaddress read-only
The IP address to which this entry's information pertains.
                         rsIcmpRdIpAdvertAddr 1.3.6.1.4.1.89.26.2.2.1.2 ipaddress read-write
The IP destination address to be used for multicast Router Advertisements sent from the interface. The only permissible values are the all-systems multicast address, 224.0.0.1, or the limited-broadcast address, 255.255.255.255.
                         rsIcmpRdMaxAdvertInterval 1.3.6.1.4.1.89.26.2.2.1.3 integer read-write
The maximum time allowed between sending multicast Router Advertisements from the interface, in seconds. Must be no less than 4 seconds and no greater than 1800 seconds.
                         rsIcmpRdMinAdvertInterval 1.3.6.1.4.1.89.26.2.2.1.4 integer read-write
The minimum time allowed between sending unsolicited multicast Router Advertisements from the interface, in seconds. Must be no less than 3 seconds and no greater than rsIcmpRdMaxAdvertInterval. Default: 0.75 * rsIcmpRdMaxAdvertInterval.
                         rsIcmpRdAdvertLifetime 1.3.6.1.4.1.89.26.2.2.1.5 integer read-write
The maximum length of time that the advertised addresses are to be considered as valid. Must be no less than rsIcmpRdMaxAdvertInterval and no greater than 9000 seconds. Default: 3 * rsIcmpRdMaxAdvertInterval.
                         rsIcmpRdAdvertise 1.3.6.1.4.1.89.26.2.2.1.6 integer read-write
A flag indicating whether or not the address is to be advertised. Enumeration: 'enable': 1, 'disable': 2.
                         rsIcmpRdPreferenceLevel 1.3.6.1.4.1.89.26.2.2.1.7 integer read-write
The preferability of the address as a default router address, relative to other router addresses on the same subnet.
                         rsIcmpRdEntStatus 1.3.6.1.4.1.89.26.2.2.1.8 integer read-write
Setting of any value to this object set values of all fields to the default values.
             rip2Spec 1.3.6.1.4.1.89.26.3
                 rsRip2IfConfTable 1.3.6.1.4.1.89.26.3.1 no-access
This table is extension of rip2IfConfTable (RFC 1389 ,RIP 2)
                     rsRip2IfConfEntry 1.3.6.1.4.1.89.26.3.1.1 no-access
                         rsRip2IfConfAddress 1.3.6.1.4.1.89.26.3.1.1.1 ipaddress read-only
The IP Address of this system on the indicated subnet.
                         rsRip2IfConfVirtualDis 1.3.6.1.4.1.89.26.3.1.1.2 integer read-write
This variable defines the virtual number of hops assigned to the interface specified by rsIfIpAddrIndex. This enables fine-tuning of the RIP routing algorithm.
                         rsRip2IfConfAutoSend 1.3.6.1.4.1.89.26.3.1.1.3 integer read-write
This variable controls RIP automatic send behavior. If enabled and no routers were heard on the interface, RIP will only send default route with high metric. Otherwise RIP will send updates according to configuration. Enumeration: 'enable': 1, 'disable': 2.
             arpSpec 1.3.6.1.4.1.89.26.4
                 rsArpDeleteTable 1.3.6.1.4.1.89.26.4.1 integer read-write
Setting this object to any not-null value has the effect of deleting all entries of the ARP table.
                 rsArpInactiveTimeOut 1.3.6.1.4.1.89.26.4.2 integer read-write
This variable defines the maximum time period (in second) that can pass between ARP requests concerning an entry in the ARP table. After this time period, the entry is deleted from the table.
                 rsArpProxy 1.3.6.1.4.1.89.26.4.3 integer read-write
When ARP Proxy is enabled, the router can respond to ARP requests for nodes located on a different sub-net, provided they are it its network table. The router responds with its own MAC address. When ARP Proxy is disabled, the router responds only to ARP requests for its own IP addresses. Enumeration: 'enable': 1, 'disable': 2.
             tftp 1.3.6.1.4.1.89.26.5
                 rsTftpRetryTimeOut 1.3.6.1.4.1.89.26.5.1 integer read-write
General Retransmission time-out value (seconds)
                 rsTftpTotalTimeOut 1.3.6.1.4.1.89.26.5.2 integer read-write
Total Retransmission time-out value (seconds)
                 rsSendConfigFile 1.3.6.1.4.1.89.26.5.3 displaystring read-write
The file name include path where the Router Server will put the full configuration. The default destination address will be the sender address.
                 rsGetConfigFile 1.3.6.1.4.1.89.26.5.4 displaystring read-write
The file name include path where the Router Server will get the configuration. The default source address will be the sender address.
                 rsLoadSoftware 1.3.6.1.4.1.89.26.5.5 displaystring read-write
The file name include path where the Router Server will get the software. The source address will the sender address.
                 rsFileServerAddress 1.3.6.1.4.1.89.26.5.6 ipaddress read-write
The IP address of the configuration / sw server.
             ipRedundancy 1.3.6.1.4.1.89.26.6
                 ipRedundAdminStatus 1.3.6.1.4.1.89.26.6.1 integer read-write
This parameter controle the IP Redundancy in the device. In case the the parameter in Enable and second router down. all the traffic hendle by this element. Enumeration: 'enable': 1, 'disable': 2.
                 ipRedundOperStatus 1.3.6.1.4.1.89.26.6.2 integer read-only
obsolete Enumeration: 'active': 1, 'inactive': 2.
                 ipRedundRoutersTable 1.3.6.1.4.1.89.26.6.3 no-access
List of IP addresses backed up by this router.
                     ipRedundRoutersEntry 1.3.6.1.4.1.89.26.6.3.1 no-access
The row definition for this table.
                         ipRedundRoutersIfAddr 1.3.6.1.4.1.89.26.6.3.1.1 ipaddress read-only
The Ip address of the IP interface on which the redundancy feature is operational.
                         ipRedundRoutersMainRouterAddr 1.3.6.1.4.1.89.26.6.3.1.2 ipaddress read-only
The Ip address of the polled main router.
                         ipRedundRoutersOperStatus 1.3.6.1.4.1.89.26.6.3.1.3 integer read-only
If active, the main router is considered inoperational and the IP interface operates as its backup. Enumeration: 'active': 1, 'inactive': 2.
                         ipRedundRoutersPollInterval 1.3.6.1.4.1.89.26.6.3.1.4 integer read-write
Polling interval for this router (in seconds). If 0 the router is not polled.
                         ipRedundRoutersTimeout 1.3.6.1.4.1.89.26.6.3.1.5 integer read-write
Interval in seconds during which the backed-up router must signal. If it does not signal, it is considered inoperational and the IP interface starts operating as backup.
                         ipRedundRoutersStatus 1.3.6.1.4.1.89.26.6.3.1.6 integer read-write
Entry status Enumeration: 'createAndWait': 5, 'notInService': 2, 'notReady': 3, 'createAndGo': 4, 'active': 1, 'destroy': 6.
             ipRouteLeaking 1.3.6.1.4.1.89.26.7
                 ipLeakStaticToRip 1.3.6.1.4.1.89.26.7.1 integer read-write
This parameter controls leaking (redistribution) of static routes to RIP. When enabled, all routes inserted to the IP routing table via SNMP are advertised into RIP. Enumeration: 'enable': 1, 'disable': 2.
                 ipLeakStaticToOspf 1.3.6.1.4.1.89.26.7.2 integer read-write
This parameter controls leaking (redistribution) of static routes into OSPF. When enabled, all routes inserted to the IP routing table via SNMP are advertised into OSPF as external routes. Enumeration: 'enable': 1, 'disable': 2.
                 ipLeakOspfToRip 1.3.6.1.4.1.89.26.7.3 integer read-write
This parameter controls leaking (redistribution) of routes from OSPF to RIP. If enabled, all routes learned via OSPF are advertised into RIP. Enumeration: 'enable': 1, 'disable': 2.
                 ipLeakRipToOspf 1.3.6.1.4.1.89.26.7.4 integer read-write
This parameter controls leaking (redistribution) of routes from RIP to OSPF. If enabled, all routes learned via RIP are advertised into OSPF as external routes. Enumeration: 'enable': 1, 'disable': 2.
                 ipLeakExtDirectToOspf 1.3.6.1.4.1.89.26.7.5 integer read-write
This parameter controls leaking (redistribution) into OSPF of direct routes external to OSPF, i.e. routes to local network corresponding to IP interfaces on which OSPF is disabled. When enabled, all such direct routes are advertised into OSPF as external routes. Enumeration: 'enable': 1, 'disable': 2.
             ipRipFilter 1.3.6.1.4.1.89.26.8
                 rsIpRipFilterGlbTable 1.3.6.1.4.1.89.26.8.1 no-access
The table of RIP global filters per IP router.
                     rsIpRipFilterGlbEntry 1.3.6.1.4.1.89.26.8.1.1 no-access
An entry in the RIP global filter table
                         rsIpRipFilterGlbType 1.3.6.1.4.1.89.26.8.1.1.1 integer read-only
Type of filter - input/output Enumeration: 'input': 1, 'output': 2.
                         rsIpRipFilterGlbNumber 1.3.6.1.4.1.89.26.8.1.1.2 integer read-only
Number of RIP filter.
                         rsIpRipFilterGlbStatus 1.3.6.1.4.1.89.26.8.1.1.3 integer read-write
The validity of this entry. Setting this value to invalid deletes the entry, and the entry may be actualy removed from the table. Enumeration: 'underCreation': 3, 'valid': 1, 'invalid': 2.
                         rsIpRipFilterGlbIpAddr 1.3.6.1.4.1.89.26.8.1.1.4 ipaddress read-write
network prefix IP address, as in the forwarding table.
                         rsIpRipFilterGlbNetworkMaskBits 1.3.6.1.4.1.89.26.8.1.1.5 integer read-write
the number of bits in the IP Network mask, called network-prefix-length in Router Requirements terminology. for example: the value 16 means mask 255.255.0.0
                         rsIpRipFilterGlbMatchBits 1.3.6.1.4.1.89.26.8.1.1.6 integer read-write
the number of bits to match in the Network IP address. A value smaller than 32 defines a wildcard. for example: the value 8 means all routes whose leftmost 8 bits are equal to those of the network IP address. If this variable has a value other than 32, than rsIpRipFilterGlbNetworkMaskBits must be 0 and is ignored.
                         rsIpRipFilterGlbAction 1.3.6.1.4.1.89.26.8.1.1.7 integer read-write
Filter action - permit/deny for this network Enumeration: 'deny': 1, 'permit': 2.
                 rsIpRipFilterLclTable 1.3.6.1.4.1.89.26.8.2 no-access
Table of input/output RIP filters used per IP Interface.
                     rsIpRipFilterLclEntry 1.3.6.1.4.1.89.26.8.2.1 no-access
An entry in the Intf RIP filter table
                         rsIpRipFilterLclIpIntf 1.3.6.1.4.1.89.26.8.2.1.1 ipaddress read-only
The IP address identifying the RIP interface for this filter. This value corresponds to rsIpAdEntAddr.
                         rsIpRipFilterLclType 1.3.6.1.4.1.89.26.8.2.1.2 integer read-only
Type of filter - input/output Enumeration: 'input': 1, 'output': 2.
                         rsIpRipFilterLclNumber 1.3.6.1.4.1.89.26.8.2.1.3 integer read-only
Number of RIP filter for this Interface
                         rsIpRipFilterLclStatus 1.3.6.1.4.1.89.26.8.2.1.4 integer read-write
The validity of this entry. Setting this value to invalid deletes the entry, and the entry may be actualy removed from the table. Enumeration: 'underCreation': 3, 'valid': 1, 'invalid': 2.
                         rsIpRipFilterLclIpAddr 1.3.6.1.4.1.89.26.8.2.1.5 ipaddress read-write
network prefix IP address, as in the forwarding table.
                         rsIpRipFilterLclNetworkMaskBits 1.3.6.1.4.1.89.26.8.2.1.6 integer read-write
the number of bits in the IP Network mask, called network-prefix-length in Router Requirements terminology. for example: the value 16 means mask 255.255.0.0
                         rsIpRipFilterLclMatchBits 1.3.6.1.4.1.89.26.8.2.1.7 integer read-write
the number of bits to match in the Network IP address. A value smaller than 32 defines a wildcard. for example: the value 8 means all routes whose leftmost 8 bits are equal to those of the network IP address. If this variable has a value other than 32, than rsIpRipFilterLclNetworkMaskBits must be 0 and is ignored.
                         rsIpRipFilterLclAction 1.3.6.1.4.1.89.26.8.2.1.8 integer read-write
Filter action - permit/deny Enumeration: 'deny': 1, 'permit': 2.
             rsRipEnable 1.3.6.1.4.1.89.26.9 integer read-write
Enables or disables RIP. Enumeration: 'enable': 1, 'disable': 2.
             lreBoxAgentIP 1.3.6.1.4.1.89.26.10 ipaddress read-write
       virtualLan 1.3.6.1.4.1.89.27
             virtualLanTable 1.3.6.1.4.1.89.27.1 no-access
An entry of this table specifies an new ifIndex with a type of propVirtual(53).
                 virtualLanEntry 1.3.6.1.4.1.89.27.1.1 no-access
A list of information for each virtual LAN.
                     vlIfIndex 1.3.6.1.4.1.89.27.1.1.1 integer read-write
An logical interface number, corresponded this VL
                     vlProto 1.3.6.1.4.1.89.27.1.1.2 integer read-write
The protocol, supported by this VL. The meanings of the values are: other: none of the following. This VL includes any protocol except the following protocols. It is a bridging VL. RS relies on a third-party router to exchange traffic between nodes on different virtual LANs of this type. IP: This is a routing VL, RS will route between nodes on different virtual LANs. IPmulticast: RS will broadcast the message to all the VL's ports. Used for video-conferencing applications. ipxRaw: This is a Routing VL, RS will route between nodes on different virtual LANs. ipxET: This is a routing VL, RS will route between nodes on different virtual LANs. ipxLLC: This is a routing VL, RS will route between nodes on different virtual LANs. ipxSNAP: This is a routing VL, RS will route between nodes on different virtual LANs. decNET: This is a bridging VL, RS relies on a third-party router to exchange traffic between nodes on different DECnet virtual LANs of this type. netBios: This is a Bridging VL, RS relies on a third-party router to exchange traffic between nodes on different NetBIOS virtual LANs of this type. appleTalk: This is a bridging VL, RS relies on a third-party router to exchange traffic between nodes on different AppleTalk virtual LANs of this type. Enumeration: 'xns': 12, 'ipmulticast': 3, 'sna': 13, 'ip': 2, 'appleTalk': 11, 'userDefined': 14, 'ipxLLC': 6, 'ipxRaw': 4, 'other': 1, 'ipxSNAP': 7, 'netBios': 10, 'decNET': 8, 'ipxET': 5, 'decLAT': 9.
                     vlAutoConfigEnable 1.3.6.1.4.1.89.27.1.1.3 truthvalue read-write
It is used only in the case of IP. The meanings of the values are: true(1): Autolearning is used for this VL false(2): Autolearning isn't used for this VL from ports, specified in the table virtualLanAutoConfTable.
                     vlStatus 1.3.6.1.4.1.89.27.1.1.4 rowstatus read-write
It is used to delete an entry
                     vlType 1.3.6.1.4.1.89.27.1.1.5 integer read-write
regular - ordinary type specBroadcast - for switches that support VLANs as a set of ports and only as a broadcast domain: broadcast frames do not cross VLAN's bounders, but unicast frames may be transmitted between different VLANs. Permits passing of broadcast frames between Vgate's VLANs. specArpReq - for switches that support VLANs as a set of ports and only as a broadcast domain: broadcast frames do not cross VLAN's bounders, but unicast frames may be transmitted between different VLANs. Permits passing of ARP request frames between Vgate's VLANs. specBroadcastAndUnicast - for switches that support VLANs as a set of ports but no frame crosses VLAN's bounders. Permits passing of IP/ARP request broadcast and IP unicast frames between Vgate's VLANs. specArpReqAndUnicast - for switches that support VLANs as a set of ports but no frame crosses VLAN's bounders. Permits passing of ARP request broadcast and IP unicast frames between Vgate's VLANs. This type can be used only for IP VLANs. Enumeration: 'specArpReqAndUnicast': 5, 'regular': 1, 'specArpReq': 3, 'specBroadcast': 2, 'specBroadcastAndUnicast': 4.
             virtualLanPortsTable 1.3.6.1.4.1.89.27.2 no-access
For each VL (a ifIndex with a type of propVirtual(53)) an entry of this table specifies a set of ports, which it contains.
                 virtualLanPortEntry 1.3.6.1.4.1.89.27.2.1 no-access
A entry of this table specifies a VL and a port belonging to it
                     vLIfIndex 1.3.6.1.4.1.89.27.2.1.1 integer read-write
An logical interface number, corresponding to this VL
                     vLPortIfIndex 1.3.6.1.4.1.89.27.2.1.2 integer read-write
A physical port belonging to the VL specified by vlIfIndex.
                     vLPortType 1.3.6.1.4.1.89.27.2.1.3 integer read-only
static means configured by user dynamic means autoconfigured by the RS Enumeration: 'dynamic': 2, 'static': 1.
                     vLPortStatus 1.3.6.1.4.1.89.27.2.1.4 rowstatus read-write
It is used to delete an entry
             virtualLanAutoConfTable 1.3.6.1.4.1.89.27.3 no-access
This table specifies per a routing protocol a set of ports, from which RS will automatically learning VL in accordance with rules, defined by the protocol.
                 virtualLanAutoConfEntry 1.3.6.1.4.1.89.27.3.1 no-access
One port, specified by vlAutoConfPortIfIndex, for which the RS will automatically learn its VL in accordance with rules, defined by the protocol specified in vlAutoConfProto.
                     vlAutoConfPortIfIndex 1.3.6.1.4.1.89.27.3.1.1 integer read-write
Port on which the autoconfig option should be supported
                     vlAutoConfProto 1.3.6.1.4.1.89.27.3.1.2 integer read-only
Protocol for which the autoconfig option is supported for the port specified by vlAutoConfPortIfIndex Enumeration: 'ip': 2.
                     vlAutoConfStatus 1.3.6.1.4.1.89.27.3.1.3 rowstatus read-write
It is used to delete an entry
             virtualLanAutoConfAgingTimeout 1.3.6.1.4.1.89.27.4 integer read-write
The units of this MIB object is seconds. Its value can be either 0 or in range 10..65535 .
             virtualLanProtocolVlan 1.3.6.1.4.1.89.27.5
                 virtualLanUserEtherType 1.3.6.1.4.1.89.27.5.1 octet string read-write
                 virtualLanUserMask 1.3.6.1.4.1.89.27.5.2 octet string read-write
       rsConf 1.3.6.1.4.1.89.28
             rsIfConfTable 1.3.6.1.4.1.89.28.1 no-access
This table enable the user to add interface to the RS. RS will automatically add the new interface to the interface Table
                 rsIfConfEntry 1.3.6.1.4.1.89.28.1.1 no-access
Each entry defines a configured interface.
                     rsIfConfIndex 1.3.6.1.4.1.89.28.1.1.1 integer read-only
This variable uniquely identifies the interface. It is used as a cross reference in other system tables
                     rsIfConfType 1.3.6.1.4.1.89.28.1.1.2 rsiftype read-write
This variable identifies the type of the specific entry in the rsIfConfTable. This field is writable only at creation time (i.e., when value of status is underCreation).
                     rsIfConfName 1.3.6.1.4.1.89.28.1.1.3 displaystring read-write
This variable provides a logical name to a specific entry in rsIfConfTable
                     rsIfConfStatus 1.3.6.1.4.1.89.28.1.1.4 rowstatus read-write
The status of the ConfigEntry. The choices are those defined in SNMPv2-TC. Only: active, createAndWait, and destroy will be used. active - The conceptual row is available for use by the managed device. createAndWait - A new instance of a conceptual row is desired, but not to have it available for use by the managed device. destroy - Delete all instances associated with an existing conceptual row.
       rsTunning 1.3.6.1.4.1.89.29
             rsHighPriority 1.3.6.1.4.1.89.29.1 integer read-write
This variable indicates the time interval the forwarding task inside the RS works in High Priority Mode.
             rsLowPriority 1.3.6.1.4.1.89.29.2 integer read-write
This variable indicates the time interval the forwarding task inside the RS works in Low Priority Mode.
             rsDbgLevel 1.3.6.1.4.1.89.29.3 integer read-write
This variable indicates the debug level the Router Server works. the range of this variable is 1..100
             rsDiagnostic 1.3.6.1.4.1.89.29.4 displaystring read-only
This variable will contain some dignostic information in case on a problem ocurs in the RS functinality.
             rsConfirmMessagTab 1.3.6.1.4.1.89.29.5 integer read-write
This variable enables the operator to confirm all the message in the event Message Table.
             eventMessageTable 1.3.6.1.4.1.89.29.6 no-access
The Event Message table of the agent
                 eventMessageEntry 1.3.6.1.4.1.89.29.6.1 no-access
The row definition for this table.
                     eventNum 1.3.6.1.4.1.89.29.6.1.1 integer read-only
The event number,the index of this table.
                     eventDesc 1.3.6.1.4.1.89.29.6.1.2 displaystring read-only
The event discription, this text will include time and severity.
             reaTunning 1.3.6.1.4.1.89.29.7
                 reaIpRemoteAgingTime 1.3.6.1.4.1.89.29.7.1 integer read-write
This variable specifies aging time used by the REA for remote entries in the Ip Fast Forwarding Table.
                 reaFftHashMaxChain 1.3.6.1.4.1.89.29.7.2 integer read-write
This variable specifies the maximum length of hash chains in the Fast Forwarding Tables.
                 reaMltcstBitOn 1.3.6.1.4.1.89.29.7.3 integer read-write
Enumeration: 'on': 1, 'off': 2.
                 reaIpForwardEnable 1.3.6.1.4.1.89.29.7.4 integer read-write
The Platform will perform fast IP forwarding if only if this variable's value is enable. Enumeration: 'enable': 1, 'disable': 2.
                 reaIpxForwardEnable 1.3.6.1.4.1.89.29.7.5 integer read-write
The Platform will perform fast IPX forwarding if only if this variable's value is enable. Enumeration: 'enable': 1, 'disable': 2.
                 reaBridgeEnable 1.3.6.1.4.1.89.29.7.6 integer read-write
The Platform will perform bridging if only if this variable's value is enable. Enumeration: 'enable': 1, 'disable': 2.
                 reaFacsEnable 1.3.6.1.4.1.89.29.7.7 integer read-write
The RS and Platform will perform FASC if only if this variable's value is enable. Enumeration: 'enable': 1, 'disable': 2.
                 reaIpForwardDatagrams 1.3.6.1.4.1.89.29.7.8 counter read-only
The number of IP datagrams have been forwarded by the Platform.
                 reaIpInDiscards 1.3.6.1.4.1.89.29.7.9 counter read-only
The number of IP datagrams have been dicarded by the Platform.
                 reaIpxForwardDatagrams 1.3.6.1.4.1.89.29.7.10 counter read-only
The number of IPX datagrams have been forwarded by the Platform.
                 reaIpxInDiscards 1.3.6.1.4.1.89.29.7.11 counter read-only
The number of IP datagrams have been dicarded by the Platform.
                 reaBridgeFftTable 1.3.6.1.4.1.89.29.7.12 no-access
The Bridge Fast Forwarding Table
                       reaBridgeFftEntry 1.3.6.1.4.1.89.29.7.12.1 no-access
The row definition for this table.
                           reaBrgFftEntryNum 1.3.6.1.4.1.89.29.7.12.1.1 integer read-only
                           reaBrgFftMacAddr 1.3.6.1.4.1.89.29.7.12.1.2 physaddress read-only
                           reaBrgFftReNum 1.3.6.1.4.1.89.29.7.12.1.3 integer read-only
                           reaBrgFftPortNum 1.3.6.1.4.1.89.29.7.12.1.4 integer read-only
                           reaBrgFftFacsSrcIndex 1.3.6.1.4.1.89.29.7.12.1.5 integer read-only
                           reaBrgFftFacsDstIndex 1.3.6.1.4.1.89.29.7.12.1.6 integer read-only
                 reaBrgDiscards 1.3.6.1.4.1.89.29.7.13 counter read-only
The number of bridging datagrams have been discarded by the Platform.
                 reaBrgForwards 1.3.6.1.4.1.89.29.7.14 counter read-only
The number of bridging datagrams have been forwarded by the Platform.
                 reaIpFftTable 1.3.6.1.4.1.89.29.7.15 no-access
The IP Fast Forwarding Table
                       reaIpFftEntry 1.3.6.1.4.1.89.29.7.15.1 no-access
The row definition for this table.
                           reaIpFftEntryNum 1.3.6.1.4.1.89.29.7.15.1.1 integer read-only
                           reaIpFftDstIpAddr 1.3.6.1.4.1.89.29.7.15.1.2 ipaddress read-only
                           reaIpFftDstIpMask 1.3.6.1.4.1.89.29.7.15.1.3 ipaddress read-only
                           reaIpFftRangeType 1.3.6.1.4.1.89.29.7.15.1.4 integer read-only
Enumeration: 'remote': 2, 'direct': 1.
                           reaIpFftSrcMacAddr 1.3.6.1.4.1.89.29.7.15.1.5 physaddress read-only
                           reaIpFftDstMacAddr 1.3.6.1.4.1.89.29.7.15.1.6 physaddress read-only
                           reaIpFftReNum 1.3.6.1.4.1.89.29.7.15.1.7 integer read-only
                           reaIpFftPortNum 1.3.6.1.4.1.89.29.7.15.1.8 integer read-only
                           reaIpFftFacsSrcIndex 1.3.6.1.4.1.89.29.7.15.1.9 integer read-only
                           reaIpFftFacsDstIndex 1.3.6.1.4.1.89.29.7.15.1.10 integer read-only
                           reaIpFftApplFlags 1.3.6.1.4.1.89.29.7.15.1.11 octet string read-only
A bit mask that defines the applications associated with this entry: __________________________________________ | Byte 1|Byte 2 |Byte 3 | ....|Byte 20 | |87654321| | 87654321| |________|_______________________________| Byte1 : bit1: Server Dispatcher Client
                 reaIpxFftTable 1.3.6.1.4.1.89.29.7.16 no-access
The IPX Fast Forwarding Table
                       reaIpxFftEntry 1.3.6.1.4.1.89.29.7.16.1 no-access
The row definition for this table.
                           reaIpxFftEntryNum 1.3.6.1.4.1.89.29.7.16.1.1 integer read-only
                           reaIpxFftDstNetid 1.3.6.1.4.1.89.29.7.16.1.2 integer read-only
                           reaIpxFftRangeType 1.3.6.1.4.1.89.29.7.16.1.3 integer read-only
Enumeration: 'remote': 2, 'direct': 1.
                           reaIpxFftSrcMacAddr 1.3.6.1.4.1.89.29.7.16.1.4 physaddress read-only
                           reaIpxFftDstMacAddr 1.3.6.1.4.1.89.29.7.16.1.5 physaddress read-only
                           reaIpxFftReNum 1.3.6.1.4.1.89.29.7.16.1.6 integer read-only
                           reaIpxFftPortNum 1.3.6.1.4.1.89.29.7.16.1.7 integer read-only
                           reaIpxFftFacsSrcIndex 1.3.6.1.4.1.89.29.7.16.1.8 integer read-only
                           reaIpxFftFacsDstIndex 1.3.6.1.4.1.89.29.7.16.1.9 integer read-only
                 lreVnResposibilityTable 1.3.6.1.4.1.89.29.7.17 no-access
The Bridge Responsibility Table
                       lreVnResposibilityEntry 1.3.6.1.4.1.89.29.7.17.1 no-access
The row definition for this table.
                           lreVnRespVn 1.3.6.1.4.1.89.29.7.17.1.1 integer read-write
                           lreVnRespStatus 1.3.6.1.4.1.89.29.7.17.1.2 rowstatus read-write
                 reaSrcViolationEnable 1.3.6.1.4.1.89.29.7.18 integer read-write
The Platform will perform the Source Port Violation Procedure if only if this variable's value is enable. Enumeration: 'enable': 1, 'disable': 2.
                 reaSrcViolationTrapEnable 1.3.6.1.4.1.89.29.7.19 integer read-write
The RS will send the Source Port Violation TRAP messages if only if this variable's value is enable. Enumeration: 'enable': 1, 'disable': 2.
                 reaSrcAddrValidationEnable 1.3.6.1.4.1.89.29.7.20 integer read-write
The Platform will verify the source address of incoming IP datagram. Enumeration: 'enable': 1, 'disable': 2.
                 reaRsQueueDiscards 1.3.6.1.4.1.89.29.7.21 counter read-only
                 reaBufFree 1.3.6.1.4.1.89.29.7.22 integer read-only
The number of free buffers.
                 lreResetDstMacBit46 1.3.6.1.4.1.89.29.7.23 integer read-write
Enumeration: 'enable': 1, 'disable': 2.
                 lreQueSourceSelect 1.3.6.1.4.1.89.29.7.24 integer read-write
Enumeration: 'vNET': 1, 'dstMac': 2.
                 lreResetDstMacBit47 1.3.6.1.4.1.89.29.7.25 integer read-write
Enumeration: 'enable': 1, 'disable': 2.
             rsMaxEntriesTuning 1.3.6.1.4.1.89.29.8
                 rsMaxBridgeForwardingEntriesTuning 1.3.6.1.4.1.89.29.8.1
                     rsMaxBrgFrwEntries 1.3.6.1.4.1.89.29.8.1.1 integer read-only
Maximal number of entries in bridge forwarding table.
                     rsMaxBrgFrwEntriesAfterReset 1.3.6.1.4.1.89.29.8.1.2 integer read-write
Future maximal number of entries in bridge forwarding table.
                 rsMaxIpForwardingEntriesTuning 1.3.6.1.4.1.89.29.8.2
                     rsMaxIpFrwEntries 1.3.6.1.4.1.89.29.8.2.1 integer read-only
Maximal number of entries in Ip forwarding table.
                     rsMaxIpFrwEntriesAfterReset 1.3.6.1.4.1.89.29.8.2.2 integer read-write
Future maximal number of entries in Ip forwarding table.
                 rsMaxArpEntriesTuning 1.3.6.1.4.1.89.29.8.3
                     rsMaxArpEntries 1.3.6.1.4.1.89.29.8.3.1 integer read-only
Maximal number of entries in Arp forwarding table.
                     rsMaxArpEntriesAfterReset 1.3.6.1.4.1.89.29.8.3.2 integer read-write
Future maximal number of entries in Arp forwarding table.
                 rsMaxIpxForwardingEntriesTuning 1.3.6.1.4.1.89.29.8.4
                     rsMaxIpxFrwEntries 1.3.6.1.4.1.89.29.8.4.1 integer read-only
Maximal number of entries in Ipx forwarding table.
                     rsMaxIpxFrwEntriesAfterReset 1.3.6.1.4.1.89.29.8.4.2 integer read-write
Future maximal number of entries in Ipx forwarding table.
                 rsMaxIpxSapEntriesTuning 1.3.6.1.4.1.89.29.8.5
                     rsMaxIpxSapEntries 1.3.6.1.4.1.89.29.8.5.1 integer read-only
Maximal number of entries in IpxSap table.
                     rsMaxIpxSapEntriesAfterReset 1.3.6.1.4.1.89.29.8.5.2 integer read-write
Future maximal number of entries in IpxSap table.
                 rsMaxDspClntEntriesTuning 1.3.6.1.4.1.89.29.8.6
                     rsMaxDspClntEntries 1.3.6.1.4.1.89.29.8.6.1 integer read-only
Maximal number of entries in rsSdClientsTable.
                     rsMaxDspClntEntriesAfterReset 1.3.6.1.4.1.89.29.8.6.2 integer read-write
Future maximal number of entries in rsSdClientsTable.
                 rsMaxZeroHopRoutEntriesTuning 1.3.6.1.4.1.89.29.8.7
                     rsMaxZhrConns 1.3.6.1.4.1.89.29.8.7.1 integer read-only
The current maximal number of direct Zero-hop routing connections.
                     rsMaxZhrConnsAfterReset 1.3.6.1.4.1.89.29.8.7.2 integer read-write
The future (after reset) maximal number of direct Zero-hop routing connections.
                 rsMaxDspFrmEntriesTuning 1.3.6.1.4.1.89.29.8.8
                     rsMaxDspFrmEntries 1.3.6.1.4.1.89.29.8.8.1 integer read-only
Maximal number of entries in rsSdClientsTable.
                     rsMaxDspFrmEntriesAfterReset 1.3.6.1.4.1.89.29.8.8.2 integer read-write
Future maximal number of entries in rsSdClientsTable.
       rndApplications 1.3.6.1.4.1.89.35
             rsServerDispatcher 1.3.6.1.4.1.89.35.1
             rndMidLevelManagement 1.3.6.1.4.1.89.35.2
                 rndAlarmOptions 1.3.6.1.4.1.89.35.2.2
                     rndAlarmEnabling 1.3.6.1.4.1.89.35.2.2.1 integer read-write
Indicates whether alarms should be issued to the high-level NMS Enumeration: 'disabled': 2, 'enabled': 1.
                     rndAlarmInterval 1.3.6.1.4.1.89.35.2.2.2 integer read-write
Indicates the minimal period of time which must pass after issuing an alarm before issuing the same alarm again.
                 rndMonitoredElementsTable 1.3.6.1.4.1.89.35.2.3 no-access
The table of monitored elements of the network
                     rndMonitoredElementEntry 1.3.6.1.4.1.89.35.2.3.1 no-access
The row definition for this table.
                         rndMonitoredElementAddress 1.3.6.1.4.1.89.35.2.3.1.1 ipaddress read-only
The IP address of the monitored element
                         rndMonitoredElementCommunity 1.3.6.1.4.1.89.35.2.3.1.2 displaystring read-write
The community of the monitored element
                         rndMonitoredElementLabel 1.3.6.1.4.1.89.35.2.3.1.3 displaystring read-write
The label assigned by the network manager to the monitored element
                         rndDefaultPollingInterval 1.3.6.1.4.1.89.35.2.3.1.4 integer read-write
The default period of time between two consecutive pollings of the monitored element for the value of an object instance. If no other polling interval is specifically assigned to the monitored object instance, this one will be used
                         rndDefaultLogFile 1.3.6.1.4.1.89.35.2.3.1.5 displaystring read-write
The default file path of the log-file which will contain the polling results for the monitored element. If no other file path is specifically assigned to the monitored object instance, this log-file will be used.
                         rndMonitoredElementStatus 1.3.6.1.4.1.89.35.2.3.1.6 rowstatus read-write
It is used to manage the monitored elements table and indicates the current monitoring status of an element.
                 rndMonitoringTable 1.3.6.1.4.1.89.35.2.4 no-access
The table of monitored object instances. Each monitored object instance belongs to a monitored element previously entered in the rndMonitoredElementsTable.
                     rndMonitoringEntry 1.3.6.1.4.1.89.35.2.4.1 no-access
The row definition for this table.
                         rndMonitoredElement 1.3.6.1.4.1.89.35.2.4.1.1 displaystring read-only
A label assigned by the network manager to a monitored element to which this monitored object instance belongs. This label must have been previously entered in an instance of rndMonitoredElementLabel
                         rndMonitoredObjectInstanceLabel 1.3.6.1.4.1.89.35.2.4.1.2 displaystring read-only
The label assigned by the network manager to the monitored object instance
                         rndMonitoredObjectName 1.3.6.1.4.1.89.35.2.4.1.3 displaystring read-write
The symbolic object type name of the object to which the monitored object instance belongs (as it appears the MIB module definition). In case of ambiguity the : format should be used. An instance of rndMonitoredObjectName need not be assigned any value, if the corresponding instance of rndMonitoredObjectIdentifier is assigned a value, since any one of these, together with the object instance identifier, suffices to unambigously identify the monitored object instance.
                         rndMonitoredObjectIdentifier 1.3.6.1.4.1.89.35.2.4.1.4 object identifier read-write
The object identifier of the object to which the monitored object instance belongs. An instance of rndMonitoredObjectIdentifier need not be assigned any value, if the corresponding instance of rndMonitoredObjectName is assigned a value, since any one of these, together with the object instance identifier, suffices to unambigously identify the monitored object instance.
                         rndMonitoredObjectInstance 1.3.6.1.4.1.89.35.2.4.1.5 object identifier read-write
The instance identifier (key) of the monitored object instance.
                         rndMonitoredObjectSyntax 1.3.6.1.4.1.89.35.2.4.1.6 integer read-write
The syntax of the monitored object instance (i.e., the syntax of the object type of the object to which the monitored instance belongs). Need not be assigned any value if the corresponding instance of rndMonitoredObjectName has been assigned a value Enumeration: 'object-identifier': 4, 'integer': 1, 'octet-string': 2, 'ip-address': 3.
                         rndMonitoringInterval 1.3.6.1.4.1.89.35.2.4.1.7 integer read-write
The period of time between two consecutive retrievals of the monitored object instance's value.
                         rndAlarmMaxTreshold 1.3.6.1.4.1.89.35.2.4.1.8 integer read-write
The value of the monitored object instance, the exceeding of which will cause the generation of an alarm to the high-level management station.
                         rndAlarmMinTreshold 1.3.6.1.4.1.89.35.2.4.1.9 integer read-write
If the value of the monitored object instance falls below the value assigned to rndAlarmMinTreshold, an alarm to the high-level management station will be issued.
                         rndMonitoringLogfile 1.3.6.1.4.1.89.35.2.4.1.10 displaystring read-write
The entire path of the file in which the results of the monitoring of this object instance should be recorded.
                         rndMonitoringEntryStatus 1.3.6.1.4.1.89.35.2.4.1.11 rowstatus read-write
It is used to manage the monitored object instances table and indicates the current monitoring status of an object instance.
                 rndMibFilesTable 1.3.6.1.4.1.89.35.2.5 no-access
The table of monitored object instances. Each monitored object instance belongs to a monitored element previously entered in the rndMonitoredElementsTable.
                     rndMibFileEntry 1.3.6.1.4.1.89.35.2.5.1 no-access
The row definition for this table.
                         rndMibFileIndex 1.3.6.1.4.1.89.35.2.5.1.1 integer read-only
The number of the MIB file in the list MIB files supported by the Mid-Level management station. The order of the MIB files in this list must reflect the the IMPORT relation between the MIBS contained in the MIB files, i.e., if MIB A IMPORTS FROM MIB B, the file containing MIB A must have a lesser index in this table than the file containing MIB B.
                         rndMibFilePath 1.3.6.1.4.1.89.35.2.5.1.2 displaystring read-write
The path of the MIB file in the MIB file server.
                         rndMibFileRefresh 1.3.6.1.4.1.89.35.2.5.1.3 integer read-write
Indicates if the file should be fetched after setting this entry from the MIB file server. Enumeration: 'yes': 2, 'no': 1.
                         rndMibFileEntryStatus 1.3.6.1.4.1.89.35.2.5.1.4 rowstatus read-write
It is used to manage the MIB files table.
                 rndHardwareConfiguration 1.3.6.1.4.1.89.35.2.6 truthvalue read-write
Indicates whether the current SET SNMP PDU contains hardware configuration (i.e., normally read-only variables). SET of such variables in the Mid-level management station will be allowed only if this variable is included in the SNMP PDU and its value is true. Its value as returned in a GET SNMP PDU will always be false.
                 rndEraseSimulatedConfiguration 1.3.6.1.4.1.89.35.2.7 integer read-write
eraseSimulatedConfiguration instructs the MLNMS to erase all the simulated configuration from its configuration data-base (CDB). This the only accepted value for SNMP SET statements and will never be returned in SNMP GET statements. simulatedConfigurationPresent indicates that the MLNMS currently has a simulated configuration. simulatedConfigurationErased indicates that the MLNMS currently has no simulated configuration. Enumeration: 'eraseSimulatedConfiguration': 1, 'simulatedConfigurationErased': 3, 'simulatedConfigurationPresent': 2.
                 rndDeleteValuesTable 1.3.6.1.4.1.89.35.2.8 no-access
This table indicates which MIB variables are row status fields which control the status of the entry to which they belong. This table also indicates which (integer!) value of these MIB variables will cause, if present in a SNMP SET PDU, the deletion of the conceptual row instance to which the SET MIB variable instance belongs.
                     rndDeleteValuesEntry 1.3.6.1.4.1.89.35.2.8.1 no-access
The row definition for the rndDeleteValuesTable table.
                         rndRowStatusVariableName 1.3.6.1.4.1.89.35.2.8.1.1 displaystring read-write
The name of the row status field. This name may not necessarily be any name which is present in the MIBs loaded into the MLNMS station.
                         rndRowStatusObjectId 1.3.6.1.4.1.89.35.2.8.1.2 object identifier read-write
The object id of the row status field. If the rndRowStatusVariableName is a name present in the MIBs loaded into the MLNMS, this MIB variable is not required, but if given, it must match the object id known to the MLNMS. The variable identified by rndRowStatusVariableName and/or rndRowStatusObjectId must be a read-write MIB variable of type INTEGER which belongs to an entry (i.e, is a child of a MIB variable of type SEQUENCE).
                         rndRowDeleteValue 1.3.6.1.4.1.89.35.2.8.1.3 integer read-write
The value of the variable identified by rndRowStatusVariableName and/or rndRowStatusObjectId, which, if present in a SNMP SET PDU, will cause the deletion of the conceptual row instance which the SET MIB variable instance belongs.
                         rndDeleteValueEntryStatus 1.3.6.1.4.1.89.35.2.8.1.4 rowstatus read-write
It is used to delete an entry from this table.
             rsIpZeroHopRouting 1.3.6.1.4.1.89.35.3
                 rsIpZhrGeneralStatus 1.3.6.1.4.1.89.35.3.1 integer read-write
This parameter enables or disables the IP Zero Hop Routing feature for all IP interfaces. The IP Zero Hop Routing feature can also be enabled or disabled on each IP interface through the rsIpZhrStatusTable. Enumeration: 'enable': 1, 'disable': 2.
                 rsIpZhrAgingTimeout 1.3.6.1.4.1.89.35.3.2 integer read-write
This parameter controls the aging time-out in seconds of direct connections which were allocated. The virtual IP address of a direct connection whose time-out has expired is eligible for allocation to a different connection.
                 rsIpZhrStatusTable 1.3.6.1.4.1.89.35.3.3 no-access
The administrative status of the ZHR feature per ip interface.
                     rsIpZhrStatusEntry 1.3.6.1.4.1.89.35.3.3.1 no-access
An entry in the ZHR status table.
                         rsIpZhrStatusIpIntf 1.3.6.1.4.1.89.35.3.3.1.1 ipaddress read-only
The Ip interface whose ZHR feature status is accessed.
                         rsIpZhrAdminStatus 1.3.6.1.4.1.89.35.3.3.1.2 integer read-write
It is used to control whether ZHR will operate on the interface. Enumeration: 'enable': 1, 'disable': 2.
                 rsIpZhrVirtAddressTable 1.3.6.1.4.1.89.35.3.4 no-access
The table of free virtual IP addresses which may be allocated to establish direct connections - Per IP Interface.
                     rsIpZhrVirtAddressEntry 1.3.6.1.4.1.89.35.3.4.1 no-access
An entry in the ZHR virtual IP addresses table
                         rsIpZhrVirtAddressIpIntf 1.3.6.1.4.1.89.35.3.4.1.1 ipaddress read-only
The Ip Interface to which the IP addresses in this entry are allocated.
                         rsIpZhrVirtAddressTo 1.3.6.1.4.1.89.35.3.4.1.2 ipaddress read-only
The last free IP address in the block.
                         rsIpZhrVirtAddressFrom 1.3.6.1.4.1.89.35.3.4.1.3 ipaddress read-write
The first free IP address in the block.
                         rsIpZhrVirtAddressStatus 1.3.6.1.4.1.89.35.3.4.1.4 rowstatus read-write
It is used to manage the virtual address table. The supported actions will be active, createAndGo and destroy.
                 rsIpZhrConnectionsTable 1.3.6.1.4.1.89.35.3.5 no-access
Table of the currently active direct connections.
                     rsIpZhrConnectionEntry 1.3.6.1.4.1.89.35.3.5.1 no-access
An entry in the ZHR Connection table
                         rsIpZhrConnectionIpIntf 1.3.6.1.4.1.89.35.3.5.1.1 ipaddress read-only
The IP Interface for which this direct connection was established.
                         rsIpZhrConnectionSrcIp 1.3.6.1.4.1.89.35.3.5.1.2 ipaddress read-only
The source IP Address of this direct connection.
                         rsIpZhrConnectionDestIp 1.3.6.1.4.1.89.35.3.5.1.3 ipaddress read-only
The destination IP Address of this direct connection.
                         rsIpZhrConnectionVirtualIp 1.3.6.1.4.1.89.35.3.5.1.4 ipaddress read-only
The virtual IP address allocated for this direct connection.
                         rsIpZhrConnectionType 1.3.6.1.4.1.89.35.3.5.1.5 integer read-only
The type of this direct connection. dynamic - established by the RS. disabled - established by the RS. The RS detected that the virtual address is already used as destination by the source BEFORE its allocation, and therefore marked this connection as 'disabled' to prevent a future allocation of this virtual address to this source. static - established by user. Enumeration: 'disabled': 3, 'dynamic': 2, 'static': 1.
                         rsIpZhrConnectionAge 1.3.6.1.4.1.89.35.3.5.1.6 integer read-only
The age of the connection in seconds.
                         rsIpZhrConnectionStatus 1.3.6.1.4.1.89.35.3.5.1.7 rowstatus read-write
It is used to manage the connections table. The supported actions will be active, createAndGo and destroy.
         routeTableOverflow 1.3.6.1.4.1.890.5
An overflow condition has occurred in the Routing Table. The Routing Table is used for IP routing algorithm (RIP).
         resetRequired 1.3.6.1.4.1.890.10
This trap indicates that in order to perform the last SET request, a reset operation of the router/bridge is required. This occurs when the layer 2 routing algorithm is changed between SPF and Spanning Tree. The reset can be performed manually or using the variable rndAction.
         endTftp 1.3.6.1.4.1.890.12
This trap indicates that in the device finished a TFTP transaction with the management station. variable rndErrorDesc and rndErrorSeverity provides the actual message text and severity respectively.
         abortTftp 1.3.6.1.4.1.890.13
This trap indicates that in the device aborted a TFTP session with the management station. variable rndErrorDesc and rndErrorSeverity provides the actual message text and severity respectively.
         startTftp 1.3.6.1.4.1.890.14
Informational trap indicating that the device has intiated a TFTP session. rndErrorDesc will contain the file type in question
         ipxRipTblOverflow 1.3.6.1.4.1.890.36
This trap indicates that in an OpenGate IPX RIP table overflow. The bound variable rndErrorDesc, rndErrorSeverity provides the actual message text and severity respectively.
         ipxSapTblOverflow 1.3.6.1.4.1.890.37
This trap indicates that in an OpenGate IPX SAP table overflow. The bound variable rndErrorDesc, rndErrorSeverity provides the actual message text and severity respectively.
         facsAccessVoilation 1.3.6.1.4.1.890.49
This trap indicates that message that fits FACS statenebt with operation blockAndReport was forward to the interface.The bound variable rndErrorDesc, rndErrorSeverity(== info ) and interface Number.
         autoConfigurationCompleted 1.3.6.1.4.1.890.50
This trap indicates that auto comfiguration completetd succssefully. The bound variable rndErrorDesc, rndErrorSeverity(== info )
         forwardingTabOverflow 1.3.6.1.4.1.890.51
This trap indicates that an overflow condition has occurred in the layer II Forward Table. The bound variable rndErrorDesc, rndErrorSeverity(== warning )
         errorsDuringInit 1.3.6.1.4.1.890.61
         vlanDynPortAdded 1.3.6.1.4.1.890.66
         vlanDynPortRemoved 1.3.6.1.4.1.890.67
         rsSDclientsTableOverflow 1.3.6.1.4.1.890.68
This warning is generated when an overflow occurs in the clients table.
         rsSDinactiveServer 1.3.6.1.4.1.890.69
This warning is generated when a server does not respond to the dispatchers polling and is thought to be inactive.
         rsIpZhrConnectionsTableOverflow 1.3.6.1.4.1.890.70
The Zero Hop Routing connections Table has been overflown.
         rsIpZhrReqStaticConnNotAccepted 1.3.6.1.4.1.890.71
The requested static connection was not accepted because there is no available IP virtual address to allocate to it.
         rsIpZhrVirtualIpAsSource 1.3.6.1.4.1.890.72
The virtual IP address appeared as a source IP. All the connections using it will be deleted and it will not be further allocated to new connections.
         rsIpZhrNotAllocVirtualIp 1.3.6.1.4.1.890.73
The source IP address sent an ARP specifying a virtual IP which was not allocated for this source. This virtual IP will not be allocated to connections of this specific source IP.
         rsSnmpSetRequestInSpecialCfgState 1.3.6.1.4.1.890.74
An incoming SNMP SET request was rejected because no such requests (except action requests) are accepted after start of new configuration reception or during sending the current configuration to an NMS.
         rsWSDRedundancySwitch 1.3.6.1.4.1.890.141
Whenever main server fails and backup takes over or server comes up after failure a trap of this type is issued.