RETIX-SWITCHSTAKII-MIB: View SNMP OID List / Download MIB

VENDOR: RETIX


 Home MIB: RETIX-SWITCHSTAKII-MIB
Download as:   

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 retix 1.3.6.1.4.1.72
       switchStakII 1.3.6.1.4.1.72.20
             unitProfile 1.3.6.1.4.1.72.20.1
                 baseModule 1.3.6.1.4.1.72.20.1.1 integer read-only
Identifies the type of main PCB installed. Enumeration: 'tenPorts2AUI': 1.
                 io1Module 1.3.6.1.4.1.72.20.1.2 integer read-only
Identifies the type of card installed in the IO1 connector Enumeration: 'vacant': 1, 'atm': 5, 'sixPort10BaseT': 2, 'stakbus': 4, 'fastEthernet': 3.
                 io2Module 1.3.6.1.4.1.72.20.1.3 integer read-only
Identifies the type of card installed in the IO2 connector Enumeration: 'vacant': 1, 'atm': 5, 'sixPort10BaseT': 2, 'stakbus': 4, 'fastEthernet': 3.
             baseUnit 1.3.6.1.4.1.72.20.2
                 baseBootFirmwareVersion 1.3.6.1.4.1.72.20.2.1 integer read-only
Version number of current boot firmware in decimal, (i.e. V01.00 is displayed as 256)
                 baseSoftwareVersion 1.3.6.1.4.1.72.20.2.2 integer read-only
Version number of current software in decimal, (i.e. V01.03 is displayed as 259)
                 baseErrorLog 1.3.6.1.4.1.72.20.2.3 integer read-write
A stored value indicating that the unit has experienced a fault. Log information is formatted as a four digit hex number. Set to zero to clear the logged fault. Record this value and call Retix technical support.
             stakbus 1.3.6.1.4.1.72.20.3
                 stkbusIOPort 1.3.6.1.4.1.72.20.3.1 integer read-only
Represents the IO port containing a StakbusII card. Only one Stakbus card is permitted per unit Enumeration: 'notInstalled': 3, 'io2': 2, 'io1': 1.
                 stkbusSpeed 1.3.6.1.4.1.72.20.3.2 integer read-only
Speed in Mbps of the installed Stakbus (StakbusII = 175Mbps).
                 stkbusNodeAddress 1.3.6.1.4.1.72.20.3.3 integer read-only
Address of the Stakbus interface as set on front panel dial (0..15).
                 stkbusRingOperationalStatus 1.3.6.1.4.1.72.20.3.4 integer read-only
The status of the Retix Stakbus interface ring. Enumeration: 'ringOperational': 1, 'notInstalled': 3, 'ringNotOperational': 2.
             vlan 1.3.6.1.4.1.72.20.4
                 vlanConfig 1.3.6.1.4.1.72.20.4.1
                     vlanEnableDisable 1.3.6.1.4.1.72.20.4.1.1 integer read-write
Enables or Disables VLAN operation on this unit. Enumeration: 'disabled': 1, 'enabled': 2.
                     portVLANTable 1.3.6.1.4.1.72.20.4.1.2 no-access
Table of port based VLAN configurations. Entries (rows) are added to the table by issuing a SET command with the EnableAdd value for the portVLANEntryEdit object. The new row is created using the instantiations.
                         portVLANEntry 1.3.6.1.4.1.72.20.4.1.2.1 no-access
This is an entry in the portVLANTable.
                             portVLANEntryPortID 1.3.6.1.4.1.72.20.4.1.2.1.1 integer read-write
Port number for this VLAN configuration.
                             portVLANEntryVLANID 1.3.6.1.4.1.72.20.4.1.2.1.2 integer read-write
VLAN number or ID.
                             portVLANEntryEdit 1.3.6.1.4.1.72.20.4.1.2.1.3 integer read-write
When set to enableAdd(1) the instantiations will be used to create a new table entry (row). Existing entries can be disabled(2) or deleted (3). Enumeration: 'delete': 3, 'disable': 2, 'enableAdd': 1.