RC-PORT-MIB: View SNMP OID List / Download MIB

Enterprise MIB for the Accelar product family.

Port table

Entry containing info. for a particular port

An index value that uniquely identifies a port. This value is similar to ifIndex in MIB2.

Port type Enumeration: 'rc1000BaseTXPOE': 63, 'rcGbic1300SeFx': 104, 'rc10BaseF': 6, 'rcGbic1570Zx': 80, 'rcOc3cPosSM': 29, 'rcGbic1470Xd': 67, 'rcGbic1570': 38, 'rcGbic1470': 33, 'rcGbic1570APD': 47, 'rc1000XFP': 57, 'rcGbic1610Zx': 82, 'rcGbic1510Xd': 69, 'rcGbic1490Zx': 76, 'rc100BaseF': 3, 'rcGbic1490Bx': 85, 'rcGbicNone': 22, 'rcGbic1510Zx': 77, 'rcGbic1300Lx': 89, 'rcGbic1510APD': 44, 'rcOc3cPosMM': 30, 'rcGbic1530Zx': 78, 'rc10GbicCX': 106, 'rcPosMMF': 7, 'rc100BaseFX': 100, 'rcGbic1530APD': 45, 'rcGbicLx': 10, 'rc10GbLRM': 95, 'rc10GbOther': 62, 'rc1GbFD': 94, 'rcGbic1590': 39, 'rcGbic1610': 40, 'rcOc3cAtmSM': 25, 'rcGbic1470Zx': 75, 'rcGbic1550Xd': 71, 'rcGbic1570Xd': 72, 'rcGbic1510': 35, 'rc100BaseTX': 1, 'rcGbic1610APD': 49, 'rcGbic1590Xd': 73, 'rc10GbDWDMR': 96, 'rcGbicBx': 55, 'rc10GbDWDMW': 97, 'rcGbic1200Lx': 88, 'rcGbic1530Xd': 70, 'rc100BaseT2': 2, 'rcGbic1310Lx': 90, 'rcRmon': 41, 'rcGbicMTRJ': 103, 'rcOc12cSM': 18, 'rc10GbLW': 50, 'rcLogicalServerPort': 52, 'rc1000BaseF': 4, 'rc10GbLR': 51, 'rcOc3cCOPPER': 17, 'rcGbicSx': 11, 'rc1000BaseT': 23, 'rcGbic1590APD': 48, 'rcGbic1470APD': 42, 'rcOc12cAtmMM': 28, 'rcGbic1590Zx': 81, 'rcOc3cMM': 16, 'rcGbic1530': 36, 'rcGbic1550Zx': 79, 'rcGbic1490APD': 43, 'rcGbicZx': 24, 'rcOc12cMM': 19, 'rc1000BaseTX': 53, 'rcGbicEx': 86, 'rc100BaseTXPOE': 54, 'rcGbic1490': 34, 'rc100BaseLX': 99, 'rcGbic850Sx': 87, 'rc10GbER': 60, 'rc10GbEW': 61, 'rcGbic1310Bx': 84, 'rc100BaseSX': 98, 'rcGbic1550APD': 46, 'rc1000BaseDualF': 5, 'rcGbic1550Lx': 92, 'rcOc12cPosSM': 31, 'rcDs3': 20, 'rc10GbSR': 58, 'rc10GbSW': 59, 'rc10GbNone': 56, 'rcGbic1550Ex': 93, 'rc10GbZR': 64, 'rc10GbZW': 65, 'other': 0, 'rcGbic1310Xd': 66, 'rcGbic1550': 37, 'rcGbic1690Zx': 83, 'rcGbicCX': 105, 'rcGbic1610Xd': 74, 'rcOc3cAtmMM': 26, 'rc100BaseBX': 101, 'rcOc12cPosMM': 32, 'rcGbicXd': 12, 'rc100BaseZX': 102, 'rcAtm': 9, 'rcOc3cSM': 15, 'rcGbicOther': 14, 'rcGbicC': 13, 'rcGbic1490Lx': 91, 'rcPosSMF': 8, 'rcE3': 21, 'rcOc12cAtmSM': 27, 'rcGbic1490Xd': 68.

Type of connector installed on this port. Enumeration: 'nonRedundant': 1, 'redundant': 2.

Indicate whether this port should perform routing

Indicate whether this port should be treated with high priority

Port related actions. Enumeration: 'none': 1, 'clearLoopDetectAlarm': 7, 'flushIp': 4, 'flushMacFdb': 2, 'flushArp': 3, 'triggerRipUpdate': 6, 'flushAll': 5.

Result from the last Vlan action. Enumeration: 'fail': 4, 'none': 1, 'inProgress': 2, 'success': 3.

For ports configured with redundant connectors, this value is used to indicate which connector should be used as the 'active' connector on this port the next time the port is placed into the ifAdminStatus=Up. Enumeration: 'right': 2, 'other': 3, 'left': 1.

For ports configured with redundant connectors, this value is used to indicate which connector is currently the active one. Only one connector can be active an anytime. Enumeration: 'right': 2, 'other': 3, 'left': 1.

Indicate the status of the link attached to the back-up (non-active) connector. Enumeration: 'down': 2, 'other': 3, 'up': 1.

Indicate whether this port enabled for auto negotiations or not.

Indicates the port duplex type Enumeration: 'full': 2, 'half': 1.

Indicate this port's current duplex value. Enumeration: 'full': 2, 'half': 1.

Indicate this port's speed. Enumeration: 'mbps1000': 3, 'none': 0, 'mbps100': 2, 'mbps10000': 4, 'mbps10': 1.

Indicate this port's current speed value.

Indicate which multi-link trunk (MLT) this port is assigned to. If this port is not associated with any MLT, this value will be set to zero(0).

Indicate whether this port is locked.

Indicate whether this port can support auto-negotiation.

Indicate whether this port is a single routable port. If this value is true, the port functions like a traditional router port.

If rcUnknownMacDiscard is set to True, then a packet with an unknown source MAC address is dropped on that port, and other ports then will discard any packets with this MAC address in the destination field. For example, suppose 11:22:33:44:55:66 is an unknown source MAC, packets with source MAC 11:22:33:44:55 coming from this port is discarded, further more, packets with destination MAC 11:22:33:44:55:66 coming from other ports are also discarded, unless this address is later learned on another port or the restriction ages out.

# state transitions.

User priority level. Enumeration: 'level0': 0, 'level1': 1, 'level2': 2, 'level3': 3, 'level4': 4, 'level5': 5, 'level6': 6, 'level7': 7.

Used to specify whether over-size frames should be processed or dropped.

Used to specify the Qos level packets, carried on this port, should be processed with. Enumeration: 'level0': 0, 'level1': 1, 'level2': 2, 'level3': 3, 'level4': 4, 'level5': 5, 'level6': 6, 'level7': 7.

Used to enable/disable the Differentiated Service feature on this port.

Used to specify the Differentiated Service type for this port. Enumeration: 'access': 1, 'core': 2, 'none': 0.

Used to enable/disable the Differentiated Service IEEE 802.1P over-ride feature.

Used to show the name of the vendor of this port's connector. Only applicable to ports on a GBIC cards.

This port's name.

The octapid id of the mirrored port.

Indicatie this port's current WAN/LAN mode. Valid for 10 GE only Enumeration: 'wan': 1, 'none': 0, 'lan': 2.

Indicatie this port's current tranport layer. Valid for 10 GE only Enumeration: 'none': 0, 'sdh': 2, 'sonet': 1.

Used to enable/disable the Telephony device selected on this port

Used to set/get the selected Multimedia & Telephony Devices on this port. The String is the name of the device in the rcIpFilterMediaDevTable

Indicates the port functionality. 12uni is used to configure the port to be part of Martini service, tls is used to configure the port to be part of Any2Any VPN service and ip is used to perform the IP routing and mpls if enabled. Enumeration: 'serverl2uni': 4, 'vpls': 2, 'none': 0, 'l2uni': 1, 'ip': 3.

The port mode for l2uni service type.If the port is configured for l2uni service type, then the mode can be transparent or switched. Enumeration: 'none': 0, 'transparent': 1, 'switched': 2.

Indicate whether the port is routable.

The status of the port whether is routable.

The pid of the mirrored port.

Used to enable/disable IEEE 802.1P override. If it is enabled, 802.1p vlaue from a tagged frame may not honor.

Used to enable/disable shaper on the port.

Shaping rate in mega bits per second. Note that actual shaping rate might be different from the configured rate due to the rate granularity of the shaper.

Burst size in kilo bytes per second. Note that actual burst size might be different from the configured size due to the granularity of the shaper.

A TRUE value indicates if CP Limit shut down the interface.

Enable/Disable high secure.

Enable/Disable tls port priority override feature.

If this object is TRUE, then the specified port is hardware-capable of doing the VCT test, if the rcPortAdminStatus is also true. If this object is FALSE, then the hardware cannot do the VCT test regardless of the setting of the rcPortAdminStatus. Enumeration: 'vctCapable': 2, 'vctNotCapable': 1.

Admin status for port VCT test. If this object is set to TRUE, then the VCT test can be performed. If it is set to FALSE, then the test cannot be performed, even if the port hardware is capable of doing it. If this variable si read, then the value returned is what was previously written.

maximum number of multicast streams that are allowed to ingress to CPU through this port.

sampling period to check number of multicast streams that has ingressed CPU through this port.

enable or disable mroute stream limit on port.

It is used to indicate whether to update qos level for dynamic learned mac add resses associated with a port-based vlan when port qos level changes. If it is set to TRUE, qos level for all dynamic learned mac addresses will be changed upon changing port qos level. If it is set to DISABLE, once a mac address is learned, qos level will not updated when port qos level changes.

The VPLS dual homing is for VPLS service type only. It can be disable, firstNNI or secondNNI. Enumeration: 'secondNNI': 2, 'firstNNI': 1, 'disable': 0.

Management Vlan is configured on this port

True/False tls devices on port Managed By Service Provider.

This object is used to specify the port speed and duplex abilities to be advertised during link negotiation. bit 0 - 10 half duplex advertised bit 1 - 10 full duplex advertised bit 2 - 100 half duplex advertised bit 3 - 100 full duplex advertised bit 4 - 1000 half duplex advertised bit 5 - 1000 full duplex advertised bit 6 - Mac PAUSE frame support advertised bit 7 - Asymmetric PAUSE frame support advertised bit 8 - No advertisements The abilities specified in this object are only used when auto-negotiation is enabled on the port. If all bits in this object are disabled, and auto-negotiation is enabled on the port, then the physical link process on the port will be disabled (if hardware supports this ability). Any change in the value of this bit map will force the PHY to restart the auto-negotiation process. This will have the same effect as physically unplugging and reattaching the cable plant attached to this port. The capabilities being advertised are either all the capabilities supported by the hardware or the user- configured capabilities which is a subset of all the capability supported by hardware. The default value for this object will be all the capabilities supported by the hardware. Note that bit 6 and bit 7 are currently not supported in ERS8600. Bits: 'advertise10Full': 1, 'advertiseMacPause': 6, 'advertise1000Half': 4, 'advertise100Half': 2, 'advertise10Half': 0, 'advertiseAsymPause': 7, 'advertiseNone': 8, 'advertise1000Full': 5, 'advertise100Full': 3.

This object indicates the port speed and duplex capabilities that hardware can actually support on a port, and which may be advertised by the port using auto-negotiation. Bit 7 tells if a port supports pause frame capabilities (for full-duplex links) as a part of the advertisement. bit 0 - 10 half duplex advertisements bit 1 - 10 full duplex advertisements bit 2 - 100 half duplex advertisements bit 3 - 100 full duplex advertisements bit 4 - 1000 half duplex advertisements bit 5 - 1000 full duplex advertisements bit 6 - Mac PAUSE frame support advertisements bit 7 - Asymmetric PAUSE frame support advertisements If auto negotiation is not supported by the port hardware, then all bits will reflect a value of zero. Bits: 'advertise10Full': 1, 'advertiseMacPause': 6, 'advertise1000Half': 4, 'advertise100Half': 2, 'advertise10Half': 0, 'advertiseAsymPause': 7, 'advertise1000Full': 5, 'advertise100Full': 3.

enable or disable auto recovery of port from action taken by cp-limit, link flap or loop detect features

Indicates the port configuration for extended CP-LIMIT Enumeration: 'none': 1, 'softDown': 2, 'hardDown': 3.

Threshold for Ingress traffic utilization rate of the port for extended CP-LIMIT

Egress Rate Limit.

Used to enable/disable shape/egress-rate-limit functionality.

The remaining time the port will be disabled due to a BPDU received when BPDU filtering is enabled.

The time the port will be disabled when a BPDU is received when BPDU filtering is enabled.

Used to enable/disable BPDU filtering.

Indicates whether BPDU filtering is actually enabled or disabled.

The qinq ether type value. It is hex value. It should be displayed and input as Hex value. It is only be used when port is associated with QnQ service UNI. Otherwise, it would be ignored

Used to enable/disable the trusted DSCP feature. If enabled, the internal qos-level and 802.1p value are derived from the received packet's DSCP value. This MIB object is applicable to ports in 8348GTX so that higher priority IP traffic can bypass the oversubscribed cascading link.

Used to enable/disable the control packet rate limit. Specifies whether or not rate limiting is currently in operation for multicast and broadcast packets for the specified port.

Used to limit Multicast traffic on the specified port. Sets the limit in packets per second.

Used to limit Broadcast traffic on the specified port. Sets the limit in packets per second.

This object indicates whether 'smart' autonegotiation is enabled on a port (smart autonegotiation indicates that the port can sense whether its partner has autonegotiation enabled). This object, when supported, works in conjunction with rcPortAutoNegotiate. It is an inconsistentValue error to set rcPortAutoNegotiate to false(2) and this object to true(1) in the same Set request. Setting the object to true(1) will automatically change rcPortAutoNegotiate to true(1). Similarly, setting rcPortAutoNegotiate to false(2) will automatically change this object to false(2).

List of Meps assigned to this entry. A mep is consist of ... Domain Name, Association and Mep Id is separated by '.' A list of mep is consist of ..,..,... Each mep is separated by ','. Maximum up 8 meps

Used to indicate the number of Meps is assigned to this entry

If enabled, the Nortel IP phones connected to the port will be configured in the voice VLAN.

A port Vlan Id associates with ESM and RModule port for OEL2/MIM traffic

This attribute allows to Enable/Disable Transparent Domain Protocol at the port level on the ESM and Power Ranger Card. For the TDP packet to go out on the port, topology should be enabled both at the port and box level also.

Indicates this port's current WAN clock source. Valid for 10 GE WAN only Enumeration: 'none': 0, 'internal': 2, 'line': 1.

Limits the amount of traffic from this Ingress port.

Used to enable/disable police/ingress-rate-limit functionality.

The set of VRF ids to which this port belongs.

CFM default port vid

User provided field. Used to give extra management information/data

User provided additional field. Used to give extra management information/data

To clear the port counter

This value indicates whether a port is of type . A port can be included in any EVPN service only if this attribute is set to uni. If the port is not part of any VLAN the interface-type is set to silent. Before adding a port to a VLAN the interface type should be changed to normal. Enumeration: 'uni': 3, 'silent': 2, 'normal': 1.

MEP assigned for CFM Control. A mep consists of ... Domain Name, Association and Mep Id is separated by '.'

Port Mtu

Used to enable/disable Port Mtu functionality.

The set of VRF names to which this port belongs.

Gives the VRF Id for this Brouter port.

Gives the VRF Name for this Brouter port.

The total number of VRFs this port is associated to.

Used to enable/disable Control Packets Drop Rate Limiter functionality.

Indicates the Control Packet drop rate limit value

Used to enable/disable Control Packets Shutdown Rate Limiter functionality.

Indicates the Control Packet shutdown rate Limit value

Indicates if the Shutdown rate has been exceeded on the port

Indicates if the Drop rate has been exceeded on the port

This object contains the DHCP option 82 subscriber ID string to be used in sub-option 6. If the value is an empty string, then sub-option 6 is not included in option 82

Port pcap Table

Entry containing pcap info. for a particular port

An index value that uniquely identifies a port. This value is similar to ifIndex in MIB2.

To enable pcap for the port

Mode in which pcap is enabled Enumeration: 'both': 3, 'txFilter': 5, 'tx': 1, 'rx': 2, 'rxFilter': 4, 'bothFilter': 6.

Used to indicate the number of filter list(s) that are assigned to this port.

Used to indicate zero or more filter lists that are associated with this port for pcap. Each filter list identifier is stored as two bytes in this array starting from offset zero. Any unused bytes should be set to zero.

Used to indicate the number of ACL filter(s) that are assigned to this port which has mirror set as global-action.

Used to indicate zero or more ACL filter lists that are associated with this port for pcap (has mirror set as global-action). Each ACL filter list identifier is stored as two bytes in this array starting from offset zero. Any unused bytes should be set to zero.

Port table

Entry containing info. for a particular port

An index value that uniquely identifies an interface to a PSE port device. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.

An index value that uniquely identifies the group containing the port to which a power Etherenet PSE is connected. Group means box in the stack, module in a rack and the value 1 MUST be used for non-modular devices.

This variable uniquely identifies the power Ethernet PSE port within group rcPoePseGroupIndex to which the power Ethernet PSE entry is connected.

Port table

Entry containing info. for a particular port

An index value that uniquely identifies an interface to a PSE port device. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.

An index value that uniquely identifies the group containing the port to which a power Etherenet PSE is connected. Group means box in the stack, module in a rack and the value 1 MUST be used for as identified by the same value of ifIndex.

An index value that uniquely identifies the group containing the port to which a power Etherenet PSE is connected. Group means box in the stack, module in a rack and the value 1 MUST be used for as identified by the same value of ifIndex. Enumeration: 'high': 2, 'critical': 1, 'low': 3.

An index value that uniquely identifies the group containing the port to which a power Etherenet PSE is connected. Group means box in the stack, module in a rack and the value 1 MUST be used for as identified by the same value of ifIndex. Enumeration: 'p802dot3afAndLegacy': 2, 'p802dot3af': 1.

The maximum available PoE power of the main PSE expressed in Watts.

Port table

Entry containing info. for a particular port

An index value that uniquely identifies an interface to a PSE port device. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.

An index value that uniquely identifies an interface to a PSE port device. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.

An index value that uniquely identifies the group containing the port to which a power Etherenet PSE is connected. Group means box in the stack, module in a rack and the value 1 MUST be used for as identified by the same value of ifIndex.

An index value that uniquely identifies the group containing the port to which a power Etherenet PSE is connected. Group means box in the stack, module in a rack and the value 1 MUST be used for as identified by the same value of ifIndex.

An index value that uniquely identifies the group containing the port to which a power Etherenet PSE is connected. Group means box in the stack, module in a rack and the value 1 MUST be used for as identified by the same value of ifIndex.

An index value that uniquely identifies the group containing the port to which a power Etherenet PSE is connected. Group means box in the stack, module in a rack and the value 1 MUST be used for as identified by the same value of ifIndex.

Port LACP table

Entry containing info. for a particular port

Administratively enable/disable LACP on a port

Indicates if LACP is operationally enabled or disabled on a port

The number of miliseconds between periodic transmissions using Short Timeouts.

The number of miliseconds between periodic transmissions using LONG Timeouts.

Scalar value used to calculate timeout time from periodic time. Timeout = PeriodicTime * TimeoutScale

The number of mili seconds to delay aggregation to allow multiple links to aggregate simultaneously.

The operating value of fast periodic timer on the port.

The operating value of slow periodic timer on the port.

The operating value of timeout scale on the port.

The operating value of aggreagate wait time on port.

Port Virtual LACP table

Entry containing info. for a particular port

Administratively enable/disable Virtual LACP on a port

Indicates if Virtual LACP is operationally enabled or disabled on a port

The number of miliseconds between periodic transmissions using Short Timeouts

The number of miliseconds between periodic transmissions using LONG Timeouts.

Timeout control value. Long or Short Timeout Enumeration: 'short': 1, 'long': 2.

Scalar value used to calculate timeout time from periodic time. Timeout = PeriodicTime * TimeoutScale

VLACP Protocol Identification. The id value is in Hex

Multicast Mac Address exclusively used for VLACPDU's

Display the Vlacp Port State. Enumeration: 'down': 2, 'up': 1.

Enable/Disable Dual homing on Virtual LACP on a port

Port Remote Mirroring Table

Entry containing remote mirroring info. for a particular port

An index value that uniquely identifies a port. This value is similar to ifIndex in MIB2.

To enable remote Mirroring for the port

Mode in which remote mirroring is enabled Enumeration: 'source': 1, 'termination': 2.

Source Mac of the remote mirrored packet. Remote mirroring packet will be send with this source mac address

Destination Mac of the remote mirrored packet. Packets will be bridged to this mac address. Remote mirroring packet will be send to this mac address

Ethertype of the remote mirrored packet. Packets will be send with this ethertype

Used to indicate the number of VLAN IDs that are assigned to this port.

This field is used only if the port is assigned as remote mirroring termination port. Represents zero or more filter lists vlan in which the Destination Mac address resides. Each VLAN ID is stored as two bytes in this array starting from offset zero. Any unused bytes should be set to zero.

RowStatus

A table used to maintain Vlacp session values.

Entry containing Vlacp Session information regarding a particular port or mlt.

IfIndex of the port or Mlt

Session number of an IfIndex

Mac Address for the session

The Rx timer for the session

The valid bit for the session Enumeration: 'inValidSession': 0, 'validSession': 1.

The In packet count for the session

Port card mgmt port link table

Entry containing info. for a particular mgmt port in I/O card

IfIndex of the port.

Port description

admin status of the mgmt port Enumeration: 'down': 2, 'unknown': 3, 'up': 1.

Auto-negotiation status of the port

duplex setting for the port Enumeration: 'full': 2, 'half': 1.

speed setting for this port. Enumeration: 'mbps1000': 3, 'none': 0, 'mbps100': 2, 'mbps10': 1.

Port Flush Fdbtable

port based deletion of mac addresses learned or discarded on that port

Mac Address to be deleted.

vlan Id associated with the Mac Address

A list of RemotePortShutdown port info.

A RemotePortShutdown table entry.

The ifIndex value for a port.

This object controls whether the Remote-Port-Shutdown feature is enabled or disabled on a port.

Indicates the time period after a port has been shutdown during which it will remain down, regardless of any CCMs received during that time period.

This object indicates whether a port is shutdown by the remote port shutdown feature. Enumeration: 'down': 2, 'up': 1.

Local MAC address.

Remote MAC address.

Indicate whether the port lock feature is enabled.

The set of ports that are administratively locked. Locked ports cannot be modified in anyway until the port is unlocked first.

Test extension table. This table augments the standard ifTestTable table in RFC1573.

Proprietary test variables.

The index value which uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.

The number of iterations of the test case that completed successfully.

The number of iterations of the test case that failed.

A table used to store port statistics.

interface counters

An index value that uniquely identifies a port. This value is similar to ifIndex in MIB2.

The total number of frames that are too short that were encountered on this interface.

The total number of incoming unicast frames that were bridged.

The total number of incoming multicast frames that were bridged.

The total number of incoming broadcast frames that were bridged.

The total number of frames that were discarded by the bridging entity.

The total number of outgoing unicast frames that were bridged.

The total number of outgoing multicast frames that were bridged.

The total number of outgoing broadcast frames that were bridged.

The total number of incoming unicast frames that were routed.

The total number of incoming multicast frames that were routed.

The total number of frames that were discarded by the routing entity.

The total number of outgoing unicast frames that were routed.

The total number of outgoing multicast frames that were routed.

The number of times this port has transitioned from the Learning state to the Forwarding state.

Received Config BPDUs

Received TCN BPDUs

Received bad BPDUs

Transmitted config BPDUs

Transmitted TCN BPDUs

Used by the Accelar 8000 product family to account for all transmitted bridge unicast, broadcast, and multicast packets. The individual counters are not supported.

Count of PBT packets dropped due to unknown destination MAC

Total count of control packets that is passed for rate limiting

Count of control packets dropped after rate limiting