RC-POM-MIB: View SNMP OID List / Download MIB

VENDOR: RAPID CITY COMMUNICATION


 Home MIB: RC-POM-MIB
Download as:   

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 rcPlugOptModTableMib 1.3.6.1.4.1.2272.1.71.0
OE MIB for Digital Diagnostic Monitoring of pluggable optical modules
 rcPlugOptModTable 1.3.6.1.4.1.2272.1.71.1 no-access
Gibc SFF diagnostic info table
     rcPlugOptModEntry 1.3.6.1.4.1.2272.1.71.1.1 no-access
Entry containing info. for a particular port
         rcPlugOptModPortIndex 1.3.6.1.4.1.2272.1.71.1.1.1 interfaceindex no-access
An index value that uniquely identifies a port on a blade or line-card.
         rcPlugOptModDdmStatusMask 1.3.6.1.4.1.2272.1.71.1.1.2 bits read-only
Each bit other than ddm-ok represents a specific error. Any combination of error bits is allowed. Bits: 'ddm-i2c-read-error': 2, 'ddm-calibration-error': 4, 'ddm-checksum-error': 1, 'ddm-threshold-error': 3, 'ddm-ok': 0.
         rcPlugOptModCalibration 1.3.6.1.4.1.2272.1.71.1.1.3 integer read-only
The identifier value indicates type of calibration. Enumeration: 'internal': 1, 'external': 2.
         rcPlugOptModPowerMeasure 1.3.6.1.4.1.2272.1.71.1.1.4 integer read-only
The identifier value indicates type of external power. Enumeration: 'omi': 1, 'average': 2.
         rcPlugOptModConnectorType 1.3.6.1.4.1.2272.1.71.1.1.5 displaystring read-only
The connector type is a 16 character field that contains ASCII characters, left-aligned and padded on the right with ASCII spaces. This is an assigned name that indicates some characteristic of the layer-1 interface.
         rcPlugOptModVendorName 1.3.6.1.4.1.2272.1.71.1.1.6 displaystring read-only
The vendor name is a 16 character field that contains ASCII characters, left-aligned and padded on the right with ASCII spaces. The vendor name shall be the full name of the corporation, a commonly accepted abbreviation of the name, the SCSI company code, or the stock exchange code for the corporation.
         rcPlugOptModVendorPartNumber 1.3.6.1.4.1.2272.1.71.1.1.7 displaystring read-only
The vendor part number is a 16 byte field that contains ASCII characters, left-aligned and padded on the right with ASCII spaces, defining the vendor part number or product name.
         rcPlugOptModVendorRevNumber 1.3.6.1.4.1.2272.1.71.1.1.8 displaystring read-only
The vendor revision number is a 4-byte field that contains ASCII characters, left-aligned and padded on the right with ASCII spaces, defining the vendor product revision number.
         rcPlugOptModVendorSN 1.3.6.1.4.1.2272.1.71.1.1.9 displaystring read-only
The vendor serial number is a 16 character field that contains ASCII characters, left-aligned and padded on the right with ASCII spaces, defining the vendor serial number for the transceiver.
         rcPlugOptModVendorDateCode 1.3.6.1.4.1.2272.1.71.1.1.10 displaystring read-only
The date code is an 8-byte field that contains the vendor's date code in ASCII. This field is mandatory and takes the form: YYMMDDLC where YY is the 2 low order digits of the year (00=2000), MM is the month, 01 thru 12, DD is the day, 01 thru 31, and LC is an optional vendor specific lot code.
         rcPlugOptModPEC 1.3.6.1.4.1.2272.1.71.1.1.11 displaystring read-only
This is a 16 byte left-justified ASCII field that records the Nortel Product Equipment Code order number for the module. Nortel part numbers are 9 bytes long, so the 10th through 16th byte should be NULL.
         rcPlugOptModCLEI 1.3.6.1.4.1.2272.1.71.1.1.12 displaystring read-only
This is a 10 byte left-justified ASCII field that records the Nortel supplied Common Language Equipment Identifier code for the device. The CLEI code is a Telcordia human-readable representation of the 1D barcode.
         rcPlugOptModSupportsDDM 1.3.6.1.4.1.2272.1.71.1.1.13 truthvalue read-only
This boolean indicates whether or not the device supports the DDM capability.
         rcPlugOptModAux1Monitoring 1.3.6.1.4.1.2272.1.71.1.1.14 integer read-only
This value tells what Aux1 is measuring.The values are as follows: 0 Auxiliary monitoring not implemented 1 APD Bias Voltage mV (units of 10 mV) 2 Reserved 3 TEC Current (mA) 4 Laser Temperature 5 Laser Wavelength 6 +5V Supply Voltage 7 +3.3V Supply Voltage 8 +1.8V Supply Voltage 9 -5.2V Supply Voltage 10 +5.0V Supply Current (unit of 100 uA) 13 +3.3V Supply Current (unit of 100 uA) 14 +1.8V Supply Current (unit of 100 uA) 15 -5.2V Supply Current (unit of 100 uA)
         rcPlugOptModAux2Monitoring 1.3.6.1.4.1.2272.1.71.1.1.15 integer read-only
This value tells you what AUX2 is measuring.The values are as follows: 0 Auxiliary monitoring not implemented 1 APD Bias Voltage mV (units of 10 mV) 2 Reserved 3 TEC Current (mA) 4 Laser Temperature 5 Laser Wavelength 6 +5V Supply Voltage 7 +3.3V Supply Voltage 8 +1.8V Supply Voltage 9 -5.2V Supply Voltage 10 +5.0V Supply Current (unit of 100 uA) 13 +3.3V Supply Current (unit of 100 uA) 14 +1.8V Supply Current (unit of 100 uA) 15 -5.2V Supply Current (unit of 100 uA)
         rcPlugOptModWaveLength 1.3.6.1.4.1.2272.1.71.1.1.16 integer32 read-only
Nominal transmitter output wavelength at room temperature. It is expressed in nano-meters.
         rcPlugOptModTemperature 1.3.6.1.4.1.2272.1.71.1.1.17 integer32 read-only
This value represents the internally measured module temperature. It is expressed in units of 1/256 of a degree Celsius and can range from -40C to +125C with 0.0001 accuracy.The most significant byte is the signed integer part of the number and the least significant byte is the fraction.
         rcPlugOptModTemperatureHighAlarmThreshold 1.3.6.1.4.1.2272.1.71.1.1.18 integer32 read-only
This value represents the vendor specified high temperature threshold. If the device temperature exceeds this value, a temperature high is asserted. It is expressed in the same units as the measured temperature.
         rcPlugOptModTemperatureLowAlarmThreshold 1.3.6.1.4.1.2272.1.71.1.1.19 integer32 read-only
This value represents the vendor specified low temperature threshold. If the device temperature falls below this value, a temperature low is asserted. It is expressed in the same units as the measured temperature.
         rcPlugOptModTemperatureHighWarningThreshold 1.3.6.1.4.1.2272.1.71.1.1.20 integer32 read-only
This value represents the vendor specified high temperature warning threshold. If the device temperature exceeds this value, a temperature high warning is asserted. It is expressed in the same units as the measured temperature.
         rcPlugOptModTemperatureLowWarningThreshold 1.3.6.1.4.1.2272.1.71.1.1.21 integer32 read-only
This value represents the vendor specified low temperature warning threshold. If the device temperature falls below this value, a temperature low warning is asserted. It is expressed in the same units as the measured temperature.
         rcPlugOptModVoltage 1.3.6.1.4.1.2272.1.71.1.1.22 integer32 read-only
This value represents the internally measured supply voltage. It is a positive number expressed in microvolts and can range from 0 to 65535 mV.
         rcPlugOptModVoltageHighAlarmThreshold 1.3.6.1.4.1.2272.1.71.1.1.23 integer32 read-only
This value represents the vendor specified high voltage threshold. If the measured voltage exceeds this value, a high voltage is asserted. It is a positive number expressed in microvolts.
         rcPlugOptModVoltageLowAlarmThreshold 1.3.6.1.4.1.2272.1.71.1.1.24 integer32 read-only
This value represents the vendor specified low voltage threshold. If the measured voltage falls below this value, a low voltage is asserted. It is a positive number expressed in microvolts.
         rcPlugOptModVoltageHighWarningThreshold 1.3.6.1.4.1.2272.1.71.1.1.25 integer32 read-only
This value represents the vendor specified high voltage warning threshold. If the measured voltage exceeds this value, a high voltage warning is asserted. It is a positive number expressed in microvolts.
         rcPlugOptModVoltageLowWarningThreshold 1.3.6.1.4.1.2272.1.71.1.1.26 integer32 read-only
This value represents the vendor specified low voltage warning threshold. If the measured voltage falls below this value, a low voltage warning is asserted. It is a positive number expressed in microvolts.
         rcPlugOptModBias 1.3.6.1.4.1.2272.1.71.1.1.27 integer32 read-only
This value represents the internally measured transmitter laser bias current. It is a positive number expressed in units of 2 microamps and can range from 0 to 131 mA with 0.0001 accuracy.
         rcPlugOptModBiasHighAlarmThreshold 1.3.6.1.4.1.2272.1.71.1.1.28 integer32 read-only
This value represents the vendor specified high current threshold. If the measured bias current exceeds this value, a high current alarm is asserted. It is a positive number expressed in units of 2 microamps and can range from 0 to 131 mA with 0.0001 accuracy.
         rcPlugOptModBiasLowAlarmThreshold 1.3.6.1.4.1.2272.1.71.1.1.29 integer32 read-only
This value represents the vendor specified low current threshold. If the measured bias current falls below this value, a low current is asserted. It is a positive number expressed in units of 2 microamps and can range from 0 to 131 mA with 0.0001 accuracy.
         rcPlugOptModBiasHighWarningThreshold 1.3.6.1.4.1.2272.1.71.1.1.30 integer32 read-only
This value represents the vendor specified high current warning threshold. If the measured bias current exceeds this value, a high current warning is asserted. It is a positive number expressed in units of 2 microamps and can range from 0 to 131 mA with 0.0001 accuracy.
         rcPlugOptModBiasLowWarningThreshold 1.3.6.1.4.1.2272.1.71.1.1.31 integer32 read-only
This value represents the vendor specified low current warning threshold. If the measured bias current falls below this value, a low current warning is asserted. It is a positive number expressed in units of 2 microamps and can range from 0 to 131 mA with 0.0001 accuracy.
         rcPlugOptModTxPower 1.3.6.1.4.1.2272.1.71.1.1.32 integer32 read-only
This value represents the internally measured coupled TX output power. It is a positive number expressed in units of micro watts and can range from 0 to 65.535 mW (-40 to 18.16 dBm).
         rcPlugOptModTxPowerHighAlarmThreshold 1.3.6.1.4.1.2272.1.71.1.1.33 integer32 read-only
This value represents the vendor specified high transmit power threshold. If the measured transmitter power exceeds this value, a transmitter power high is asserted. It is a positive number expressed in units of micro watts and can range from 0 to 65.535 mW (-40 to 18.16 dBm).
         rcPlugOptModTxPowerLowAlarmThreshold 1.3.6.1.4.1.2272.1.71.1.1.34 integer32 read-only
This value represents the vendor specified low transmit power threshold. If the measured transmitter power falls below this value, a transmitter power low is asserted. It is a positive number expressed in units of micro watts and can range from 0 to 65.535 mW (-40 to 18.16 dBm).
         rcPlugOptModTxPowerHighWarningThreshold 1.3.6.1.4.1.2272.1.71.1.1.35 integer32 read-only
This value represents the vendor specified high transmit power warning threshold. If the measured transmitter power exceeds this value, a transmitter power high warning is asserted. It is a positive number expressed in units of units of micro watts and can range from 0 to 65.535 mW (-40 to 18.16 dBm).
         rcPlugOptModTxPowerLowWarningThreshold 1.3.6.1.4.1.2272.1.71.1.1.36 integer32 read-only
This value represents the vendor specified low transmit power warning threshold. If the measured transmitter power falls below this value, a transmitter power low warning is asserted. It is a positive number expressed in units of micro watts and can range from 0 to 65.535 mW (-40 to 18.16 dBm).
         rcPlugOptModRxPower 1.3.6.1.4.1.2272.1.71.1.1.37 integer32 read-only
This value represents the internally measured received power. It is a positive number expressed in units of micro watts and can range from 0 to 65.535 mW (-40 to 18.16 dBm).
         rcPlugOptModRxPowerHighAlarmThreshold 1.3.6.1.4.1.2272.1.71.1.1.38 integer32 read-only
This value represents the vendor specified high receiver power threshold. If the measured received power exceeds this value, a receiver power high is asserted. It is a positive number expressed in units of micro watts and can range from 0 to 65.535 mW (-40 to 18.16 dBm).
         rcPlugOptModRxPowerLowAlarmThreshold 1.3.6.1.4.1.2272.1.71.1.1.39 integer32 read-only
This value represents the vendor specified low receiver power threshold. If the measured received power falls below this value, a receiver power low is asserted. It is a positive number expressed in units of micro watts and can range from 0 to 65.535 mW (-40 to 18.16 dBm).
         rcPlugOptModRxPowerHighWarningThreshold 1.3.6.1.4.1.2272.1.71.1.1.40 integer32 read-only
This value represents the vendor specified high receiver power warning threshold. If the measured received power exceeds this value, a receiver power high warning is asserted. It is a positive number expressed in units of units of micro watts and can range from 0 to 65.535 uW (-40 to 18.16 dBm).
         rcPlugOptModRxPowerLowWarningThreshold 1.3.6.1.4.1.2272.1.71.1.1.41 integer32 read-only
This value represents the vendor specified low receiver power warning threshold. If the measured received power falls below this value, a receiver power low warning is asserted. It is a positive number expressed in units of units of micro watts and can range from 0 to 65.535 mW (-40 to 18.16 dBm).
         rcPlugOptModAux1 1.3.6.1.4.1.2272.1.71.1.1.42 integer32 read-only
This represents the internally measured A/D value specified.
         rcPlugOptModAux1HighAlarmThreshold 1.3.6.1.4.1.2272.1.71.1.1.43 integer32 read-only
This value represents the vendor specified high Aux1 threshold.
         rcPlugOptModAux1LowAlarmThreshold 1.3.6.1.4.1.2272.1.71.1.1.44 integer32 read-only
This value represents the vendor specified low Aux1 threshold.
         rcPlugOptModAux1HighWarningThreshold 1.3.6.1.4.1.2272.1.71.1.1.45 integer32 read-only
This value represents the vendor specified high Aux1 warning threshold.
         rcPlugOptModAux1LowWarningThreshold 1.3.6.1.4.1.2272.1.71.1.1.46 integer32 read-only
This value represents the vendor specified low Aux1 warning threshold.
         rcPlugOptModAux2 1.3.6.1.4.1.2272.1.71.1.1.47 integer32 read-only
This represents the internally measured A/D value specified.
         rcPlugOptModAux2HighAlarmThreshold 1.3.6.1.4.1.2272.1.71.1.1.48 integer32 read-only
This value represents the vendor specified high Aux1 threshold.
         rcPlugOptModAux2LowAlarmThreshold 1.3.6.1.4.1.2272.1.71.1.1.49 integer32 read-only
This value represents the vendor specified low Aux1 threshold.
         rcPlugOptModAux2HighWarningThreshold 1.3.6.1.4.1.2272.1.71.1.1.50 integer32 read-only
This value represents the vendor specified high Aux1 warning threshold.
         rcPlugOptModAux2LowWarningThreshold 1.3.6.1.4.1.2272.1.71.1.1.51 integer32 read-only
This value represents the vendor specified low Aux1 warning threshold.
         rcPlugOptModTemperatureStatus 1.3.6.1.4.1.2272.1.71.1.1.52 integer read-only
Used to indicate the current temperature status Enumeration: 'lowWarning': 4, 'highAlarm': 3, 'highWarning': 2, 'lowAlarm': 5, 'normal': 1.
         rcPlugOptModVoltageStatus 1.3.6.1.4.1.2272.1.71.1.1.53 integer read-only
Used to indicate the current voltage status Enumeration: 'lowWarning': 4, 'highAlarm': 3, 'highWarning': 2, 'lowAlarm': 5, 'normal': 1.
         rcPlugOptModBiasStatus 1.3.6.1.4.1.2272.1.71.1.1.54 integer read-only
Used to indicate the current laser bias status Enumeration: 'lowWarning': 4, 'highAlarm': 3, 'highWarning': 2, 'lowAlarm': 5, 'normal': 1.
         rcPlugOptModTxPowerStatus 1.3.6.1.4.1.2272.1.71.1.1.55 integer read-only
Used to indicate the current transmitter power status Enumeration: 'lowWarning': 4, 'highAlarm': 3, 'highWarning': 2, 'lowAlarm': 5, 'normal': 1.
         rcPlugOptModRxPowerStatus 1.3.6.1.4.1.2272.1.71.1.1.56 integer read-only
Used to indicate the current receiver power status Enumeration: 'lowWarning': 4, 'highAlarm': 3, 'highWarning': 2, 'lowAlarm': 5, 'normal': 1.
         rcPlugOptModAux1Status 1.3.6.1.4.1.2272.1.71.1.1.57 integer read-only
Used to indicate the current Aux1 status Enumeration: 'lowWarning': 4, 'highAlarm': 3, 'highWarning': 2, 'lowAlarm': 5, 'normal': 1.
         rcPlugOptModAux2Status 1.3.6.1.4.1.2272.1.71.1.1.58 integer read-only
Used to indicate the current Aux2 status Enumeration: 'lowWarning': 4, 'highAlarm': 3, 'highWarning': 2, 'lowAlarm': 5, 'normal': 1.
 rcPlugOptModScalars 1.3.6.1.4.1.2272.1.71.2
     rcPlugOptModDdmMonitor 1.3.6.1.4.1.2272.1.71.2.1 enablevalue read-write
Enable/disable the global polling monitor for DDM
     rcPlugOptModDdmMonitorInterval 1.3.6.1.4.1.2272.1.71.2.2 integer32 read-write
Indicate the interval in which the DDM alert registers is polled
     rcPlugOptModDdmTrapSend 1.3.6.1.4.1.2272.1.71.2.3 enablevalue read-write
Enable/disable the global ddm trap send to SNMP manager
     rcPlugOptModDdmAlarmPortdown 1.3.6.1.4.1.2272.1.71.2.4 enablevalue read-write
Enable/disable the global portdown option when ddm alarm occurs