RC-IP-ROUTING-MIB: View SNMP OID List / Download MIB

VENDOR: RAPID CITY COMMUNICATION


 Home MIB: RC-IP-ROUTING-MIB
Download as:   
SNMPv2-CONF, SNMPv2-TC, IF-MIB, SNMPv2-SMI, RC-VRF-MIB, RAPID-CITY, RC-IP-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
     rcIpRoutingMib 1.3.6.1.4.1.2272.1.8.4.0
Enterprise MIB for the Accelar product family.
     rcIpRoutingRedistributeRipToOspf 1.3.6.1.4.1.2272.1.8.4.1
         rcIpRoutingRedistributeRipToOspfEnable 1.3.6.1.4.1.2272.1.8.4.1.1 truthvalue read-write
Used to indicate whether or not to Redistribute RIP routes to OSPF.
         rcIpRoutingRedistributeRipToOspfExplicitMetric 1.3.6.1.4.1.2272.1.8.4.1.2 integer32 read-write
Value of metric that is used to translate the RIP route to OSPF.
         rcIpRoutingRedistributeRipToOspfUseExplicitMetric 1.3.6.1.4.1.2272.1.8.4.1.3 truthvalue read-write
Used to indicate whether or not to use the user specified default metric for redistributing RIP routes to OSPF.
         rcIpRoutingRedistributeRipToOspfExternalMetricType 1.3.6.1.4.1.2272.1.8.4.1.4 integer read-write
Used to configure the metric type of the distributed routes to OSPF domain. type1 means the metric is comparable directly to the link state metric (cost = internal cost + external cost). type2 means the metric is considered larger than any link state metric (cost = external cost). Enumeration: 'type1': 1, 'type2': 2.
     rcIpRoutingRedistributeOspfToRip 1.3.6.1.4.1.2272.1.8.4.2
         rcIpRoutingRedistributeOspfToRipEnable 1.3.6.1.4.1.2272.1.8.4.2.1 truthvalue read-write
Used to indicate whether or not to redistribute OSPF routes to RIP.
         rcIpRoutingRedistributeOspfToRipExplicitMetric 1.3.6.1.4.1.2272.1.8.4.2.2 integer32 read-write
Value of metric that is used to translate the OSPF route to RIP.
         rcIpRoutingRedistributeOspfToRipUseExplicitMetric 1.3.6.1.4.1.2272.1.8.4.2.3 truthvalue read-write
Used to indicate whether or not to use the user specified default metric for redistributing OSPF routes to RIP.
     rcIpRoutingRedistributeDirectToOspf 1.3.6.1.4.1.2272.1.8.4.3
         rcIpRoutingRedistributeDirectToOspfEnable 1.3.6.1.4.1.2272.1.8.4.3.1 truthvalue read-write
Used to indicate whether directly connected networks through non-ospf interfaces are distributed to OSPF database or not. If set to true all the static routes will be added as external routes to OSPF routing domain, provided the router is configured as AS Border router. Also originates asExtern link LSA.
         rcIpRoutingRedistributeDirectToOspfMethod 1.3.6.1.4.1.2272.1.8.4.3.2 integer read-write
Used to indicate whether or not to use the user specified default metric for redistributing direct routes to OSPF. Enumeration: 'usePortSpeed': 1, 'useExplicitMetric': 2.
         rcIpRoutingRedistributeDirectToOspfExplicitMetric 1.3.6.1.4.1.2272.1.8.4.3.3 integer32 read-write
Value of metric that is used to translate the routes to directly connected networks to OSPF.
         rcIpRoutingRedistributeDirectToOspfExternalMetricType 1.3.6.1.4.1.2272.1.8.4.3.4 integer read-write
Used to configure the metric type of the distributed routes to OSPF domain. type1 means the metric is comparable directly to the link state metric (cost = internal cost + external cost). type2 means the metric is considered larger than any link state metric (cost = external cost). Enumeration: 'type1': 1, 'type2': 2.
     rcIpRoutingRedistributeStaticToOspf 1.3.6.1.4.1.2272.1.8.4.4
         rcIpRoutingRedistributeStaticToOspfEnable 1.3.6.1.4.1.2272.1.8.4.4.1 truthvalue read-write
Used to indicate whether static routes (that are configured locally through management protocol) are distributed to OSPF database or not. If set to true all the static routes will be added as external routes to OSPF routing domain, provided the router is configured as AS Border router. Also originates asExtern link LSA.
         rcIpRoutingRedistributeStaticToOspfExplicitMetric 1.3.6.1.4.1.2272.1.8.4.4.2 integer32 read-write
Value of metric that is used to translate the static routes to OSPF.
         rcIpRoutingRedistributeStaticToOspfUseExplicitMetric 1.3.6.1.4.1.2272.1.8.4.4.3 truthvalue read-write
Used to indicate whether or not to use the user specified default metric for redistributing static routes to OSPF.
         rcIpRoutingRedistributeStaticToOspfExternalMetricType 1.3.6.1.4.1.2272.1.8.4.4.4 integer read-write
Used to configure the metric type of the distributed routes to OSPF domain. type1 means the metric is comparable directly to the link state metric (cost = internal cost + external cost). type2 means the metric is considered larger than any link state metric (cost = external cost). Enumeration: 'type1': 1, 'type2': 2.
         rcIpRoutingRedistributeStaticToOspfAdvertDefRte 1.3.6.1.4.1.2272.1.8.4.4.5 truthvalue read-write
Used to indicate whether default route (that are configured locally through management protocol) should be distributed to OSPF database or not. If set to true then the default route will be added as external route to OSPF routing domain, provided the router is configured as AS Border router. Also originates asExtern link LSA.
     rcIpRoutingRedistributeDirectToRip 1.3.6.1.4.1.2272.1.8.4.5
         rcIpRoutingRedistributeDirectToRipEnable 1.3.6.1.4.1.2272.1.8.4.5.1 truthvalue read-write
Used to indicate whether directly connected networks through non-rip interfaces are distributed to RIP or not.
     rcIpRoutingRedistributeStaticToRip 1.3.6.1.4.1.2272.1.8.4.6
         rcIpRoutingRedistributeStaticToRipEnable 1.3.6.1.4.1.2272.1.8.4.6.1 truthvalue read-write
Used to indicate whether static routes (that are configured locally through management protocol) are distributed to RIP database or not. If set to true all the static routes will be added as external routes to RIP routing domain.
     rcIpRoutingNumRoutesScalars 1.3.6.1.4.1.2272.1.8.4.7
         rcIpRoutingNumRoutesMaximumTotal 1.3.6.1.4.1.2272.1.8.4.7.1 unsigned32 read-write
The maximum total number of routes allowed.
         rcIpRoutingNumRoutesMaximumLocal 1.3.6.1.4.1.2272.1.8.4.7.2 unsigned32 read-write
The maximum number of local routes allowed.
         rcIpRoutingNumRoutesMaximumStatic 1.3.6.1.4.1.2272.1.8.4.7.3 unsigned32 read-write
The maximum number of static routes allowed.
         rcIpRoutingNumRoutesCurrentTotal 1.3.6.1.4.1.2272.1.8.4.7.4 unsigned32 read-write
The current total number of routes.
         rcIpRoutingNumRoutesCurrentLocal 1.3.6.1.4.1.2272.1.8.4.7.5 unsigned32 read-write
The current number of local routes.
         rcIpRoutingNumRoutesCurrentStatic 1.3.6.1.4.1.2272.1.8.4.7.6 unsigned32 read-write
The current number of static routes.
 rcIpRouteTable 1.3.6.1.4.1.2272.1.8.7 no-access
This entity's IP Routing table.
     rcIpRouteEntry 1.3.6.1.4.1.2272.1.8.7.1 no-access
A route to a particular destination.
         rcIpRouteDest 1.3.6.1.4.1.2272.1.8.7.1.1 ipaddress read-only
The destination IP address of this route. An entry with a value of 0.0.0.0 is considered a default route. Multiple routes to a single destination can appear in the table, but access to such multiple entries is dependent on the table- access mechanisms defined by the network management protocol in use.
         rcIpRouteMask 1.3.6.1.4.1.2272.1.8.7.1.2 ipaddress read-only
Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the rcIpRouteDest field. For those systems that do not support arbitrary subnet masks, an agent constructs the value of the rcIpRouteMask by determining whether the value of the correspondent rcIpRouteDest field belong to a class-A, B, or C network, and then using one of: mask network 255.0.0.0 class-A 255.255.0.0 class-B 255.255.255.0 class-C If the value of the rcIpRouteDest is 0.0.0.0 (a default route), then the mask value is also 0.0.0.0. It should be noted that all IP routing subsystems implicitly use this mechanism.
         rcIpRouteNextHop 1.3.6.1.4.1.2272.1.8.7.1.3 ipaddress read-only
The IP address of the next hop of this route. (In the case of a route bound to an interface which is realized via a broadcast media, the value of this field is the agent's IP address on that interface).
         rcIpRouteMetric 1.3.6.1.4.1.2272.1.8.7.1.4 integer32 read-only
The primary routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's rcIpRouteProto value. If this metric is not used, its value should be set to -1.
         rcIpRouteIfIndex 1.3.6.1.4.1.2272.1.8.7.1.5 interfaceindex read-only
The index value which uniquely identifies the local interface through which the next hop of this route should be reached. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.
         rcIpRouteType 1.3.6.1.4.1.2272.1.8.7.1.6 integer read-only
The type of route. Enumeration: 'indirect': 4, 'other': 1, 'direct': 3.
         rcIpRouteProto 1.3.6.1.4.1.2272.1.8.7.1.7 integer read-only
The routing mechanism via which this route was learned. Inclusion of values for gateway routing protocols is not intended to imply that hosts should support those protocols. Enumeration: 'bgp': 14, 'vRip': 17, 'bbnSpfIgp': 12, 'ggp': 6, 'vOspf': 15, 'ospf': 13, 'egp': 5, 'vBgp': 16, 'rip': 8, 'es-is': 10, 'ciscoIgrp': 11, 'other': 1, 'is-is': 9, 'icmp': 4, 'local': 2, 'hello': 7, 'netmgmt': 3.
         rcIpRouteAge 1.3.6.1.4.1.2272.1.8.7.1.8 integer32 read-only
The number of seconds since this route was last updated or otherwise determined to be correct. Note that no semantics of `too old' can be implied except through knowledge of the routing protocol by which the route was learned.
         rcIpRouteRowStatus 1.3.6.1.4.1.2272.1.8.7.1.9 rowstatus read-only
Used to create/delete entries
         rcIpRoutePref 1.3.6.1.4.1.2272.1.8.7.1.10 integer32 read-only
         rcIpRouteAltSequence 1.3.6.1.4.1.2272.1.8.7.1.11 integer32 read-only
Alternative Route Sequence. 0 denotes Best Route.
         rcIpRoutePathType 1.3.6.1.4.1.2272.1.8.7.1.12 integer read-only
The type of route. It is a combination of direct, indirect, best, alternative and ECMP path. Enumeration: 'iBEN': 11, 'iAN': 8, 'iBEV': 67, 'iBN': 10, 'dBN': 14, 'iAE': 1, 'iBEU': 19, 'iAEN': 9, 'dB': 6, 'iBE': 3, 'iBF': 34, 'iBEF': 35, 'iAEU': 17, 'iAU': 16, 'iBVN': 74, 'iA': 0, 'iB': 2, 'dBU': 22, 'iBU': 18, 'iBV': 66, 'iBEVN': 75.
         rcIpRouteSrcVrfId 1.3.6.1.4.1.2272.1.8.7.1.13 vrfidentifier read-only
srcVrfId of next-hop address
       rcIpStaticRouteTableSize 1.3.6.1.4.1.2272.1.8.15.1 integer32 read-only
size of Ip Static Route Table.
       rcIpStaticRouteTable 1.3.6.1.4.1.2272.1.8.15.2 no-access
This table is used to add static IP routes to the device. Routes added into this table will automatically show-up in the 'rcIpRouteTable' when the device is actively using the route to forward IP traffic.
           rcIpStaticRouteEntry 1.3.6.1.4.1.2272.1.8.15.2.1 no-access
A static route to a particular destination.
               rcIpStaticRouteDest 1.3.6.1.4.1.2272.1.8.15.2.1.1 ipaddress read-only
The destination IP address of this route. An entry with a value of 0.0.0.0 is considered a default route. Multiple routes to a single destination can appear in the table, but access to such multiple entries is dependent on the table- access mechanisms defined by the network management protocol in use.
               rcIpStaticRouteMask 1.3.6.1.4.1.2272.1.8.15.2.1.2 ipaddress read-only
Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the rcIpRouteDest field. For those systems that do not support arbitrary subnet masks, an agent constructs the value of the rcIpRouteMask by determining whether the value of the correspondent rcIpRouteDest field belong to a class-A, B, or C network, and then using one of: mask network 255.0.0.0 class-A 255.255.0.0 class-B 255.255.255.0 class-C If the value of the rcIpRouteDest is 0.0.0.0 (a default route), then the mask value is also 0.0.0.0. It should be noted that all IP routing subsystems implicitly use this mechanism.
               rcIpStaticRouteNextHop 1.3.6.1.4.1.2272.1.8.15.2.1.3 ipaddress read-only
The IP address of the next hop of this route. (In the case of a route bound to an interface which is realized via a broadcast media, the value of this field is the agent's IP address on that interface).
               rcIpStaticRouteMetric 1.3.6.1.4.1.2272.1.8.15.2.1.4 integer32 read-only
The primary routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's rcIpRouteProto value. If this metric is not used, its value should be set to -1.
               rcIpStaticRouteIfIndex 1.3.6.1.4.1.2272.1.8.15.2.1.5 interfaceindex read-only
The index value which uniquely identifies the local interface through which the next hop of this route should be reached. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.
               rcIpStaticRoutePreference 1.3.6.1.4.1.2272.1.8.15.2.1.6 integer32 read-only
Used to indicate the route preference of this entry. If there are more than one route that can be used to forward IP traffic, the route that has a highest preference will be used instead of a lower preference one. The higher the number, the higher the preference.
               rcIpStaticRouteEnable 1.3.6.1.4.1.2272.1.8.15.2.1.7 truthvalue read-only
Used to enable/disable this entry.
               rcIpStaticRouteStatus 1.3.6.1.4.1.2272.1.8.15.2.1.8 integer read-only
Used to indicate the current status of this entry. Enumeration: 'active': 1, 'inactive': 0.
               rcIpStaticRouteRowStatus 1.3.6.1.4.1.2272.1.8.15.2.1.9 rowstatus read-only
Used to create/delete entries
               rcIpStaticRouteLocalNextHop 1.3.6.1.4.1.2272.1.8.15.2.1.10 truthvalue read-only
Used to enable/disable this entry. True indicate that the static route becomes active only if switch has a local route to the network. False indicates that the static route becomes active if switch has a local route or dynamic route.
       rcIpStaticRouteBfdTableSize 1.3.6.1.4.1.2272.1.8.15.3 integer32 read-only
size of IP static route BFD table.
       rcIpStaticRouteBfdTable 1.3.6.1.4.1.2272.1.8.15.4 no-access
This table is used to hold next hop addresses on which BFD is enabled.
           rcIpStaticRouteBfdEntry 1.3.6.1.4.1.2272.1.8.15.4.1 no-access
An IP address of the next hop of the BFD session.
               rcIpStaticRouteBfdNextHop 1.3.6.1.4.1.2272.1.8.15.4.1.1 ipaddress read-only
The IP address of the next hop of the BFD session.
               rcIpStaticRouteBfdRowStatus 1.3.6.1.4.1.2272.1.8.15.4.1.2 rowstatus read-only
Used to create/delete entries
         rcIpInterVrfStaticRouteTableSize 1.3.6.1.4.1.2272.1.8.103.1 integer32 read-only
size of Ip Static Route Table.
         rcIpInterVrfStaticRouteTable 1.3.6.1.4.1.2272.1.8.103.2 no-access
This table is used to add static IP routes to the device. Routes added into this table will automatically show-up in the 'rcIpRouteTable' when the device is actively using the route to forward IP traffic.
             rcIpInterVrfStaticRouteEntry 1.3.6.1.4.1.2272.1.8.103.2.1 no-access
A static route to a particular destination.
                 rcIpInterVrfStaticRouteOwnerVrfId 1.3.6.1.4.1.2272.1.8.103.2.1.1 vrfidentifier no-access
Owner VRF id of the static route
                 rcIpInterVrfStaticRouteDest 1.3.6.1.4.1.2272.1.8.103.2.1.2 ipaddress no-access
The destination IP address of this route. An entry with a value of 0.0.0.0 is considered a default route. Multiple routes to a single destination can appear in the table, but access to such multiple entries is dependent on the table- access mechanisms defined by the network management protocol in use.
                 rcIpInterVrfStaticRouteMask 1.3.6.1.4.1.2272.1.8.103.2.1.3 ipaddress no-access
Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the rcIpRouteDest field. For those systems that do not support arbitrary subnet masks, an agent constructs the value of the rcIpRouteMask by determining whether the value of the correspondent rcIpRouteDest field belong to a class-A, B, or C network, and then using one of: mask network 255.0.0.0 class-A 255.255.0.0 class-B 255.255.255.0 class-C If the value of the rcIpRouteDest is 0.0.0.0 (a default route), then the mask value is also 0.0.0.0. It should be noted that all IP routing subsystems implicitly use this mechanism.
                 rcIpInterVrfStaticRouteNextHop 1.3.6.1.4.1.2272.1.8.103.2.1.4 ipaddress no-access
The IP address of the next hop of this route. (In the case of a route bound to an interface which is realized via a broadcast media, the value of this field is the agent's IP address on that interface).
                 rcIpInterVrfStaticRouteMetric 1.3.6.1.4.1.2272.1.8.103.2.1.5 integer32 read-only
The primary routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's rcIpRouteProto value. If this metric is not used, its value should be set to -1.
                 rcIpInterVrfStaticRouteIfIndex 1.3.6.1.4.1.2272.1.8.103.2.1.6 interfaceindex read-only
The index value which uniquely identifies the local interface through which the next hop of this route should be reached. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.
                 rcIpInterVrfStaticRoutePreference 1.3.6.1.4.1.2272.1.8.103.2.1.7 integer32 read-only
Used to indicate the route preference of this entry. If there are more than one route that can be used to forward IP traffic, the route that has a highest preference will be used instead of a lower preference one. The higher the number, the higher the preference.
                 rcIpInterVrfStaticRouteEnable 1.3.6.1.4.1.2272.1.8.103.2.1.8 truthvalue read-only
Used to enable/disable this entry.
                 rcIpInterVrfStaticRouteStatus 1.3.6.1.4.1.2272.1.8.103.2.1.9 integer read-only
Used to indicate the current status of this entry. Enumeration: 'active': 1, 'inactive': 0.
                 rcIpInterVrfStaticRouteRowStatus 1.3.6.1.4.1.2272.1.8.103.2.1.10 rowstatus read-only
Used to create/delete entries
                 rcIpInterVrfStaticRouteLocalNextHop 1.3.6.1.4.1.2272.1.8.103.2.1.11 truthvalue read-only
Used to enable/disable this entry. True indicate that the static route becomes active only if switch has a local route to the network. False indicates that the static route becomes active if switch has a local route or dynamic route.
                 rcIpInterVrfStaticRouteNextHopVrfId 1.3.6.1.4.1.2272.1.8.103.2.1.12 vrfidentifier read-only
Used to indicate nhVrfId in inter-VRF static-route configuration