RAISECOM-OPTICAL-TRANSCEIVER-MIB: View SNMP OID List / Download MIB

VENDOR: BEIJING RAISECOM SCIENTIFIC N TECHNOLOGY DEV.


 Home MIB: RAISECOM-OPTICAL-TRANSCEIVER-MIB
Download as:   

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 raisecomOpticalTransceiver 1.3.6.1.4.1.8886.1.18
This MIB module defines objects to monitor optical characteristics on the optical interfaces in a network element.
       raisecomOpticalTransceiverGlobalEnable 1.3.6.1.4.1.8886.1.18.1
           raisecomOpticalTransceiverNotifyEnable 1.3.6.1.4.1.8886.1.18.1.1 enablevar read-write
This object specifies the generation of device notifications, enable or disable. this object belongs to xfp and sfp.
           raisecomOpticalTransceiverDDMEnable 1.3.6.1.4.1.8886.1.18.1.2 enablevar read-write
Enable or disable digitaldiagnotic on the device. this object belongs to xfp and sfp.
           raisecomOpticalTransceiverCheckPwdEnable 1.3.6.1.4.1.8886.1.18.1.3 enablevar read-write
This object specifies the status of password checking on the device, enable or disable. this object belongs to xfp.
           raisecomOpticalTransceiverPollInterval 1.3.6.1.4.1.8886.1.18.1.4 integer read-write
This object specifies the value of poll-interval on the device. this object belongs to xfp and sfp.
       raisecomOpticalTransceiverObjects 1.3.6.1.4.1.8886.1.18.2
           raisecomOpticalTransceiverInfoGroup 1.3.6.1.4.1.8886.1.18.2.1
               raisecomOpticalTransceiverInfoTable 1.3.6.1.4.1.8886.1.18.2.1.1 no-access
Trancetver information Table.
                   raisecomOpticalTransceiverInfoEntry 1.3.6.1.4.1.8886.1.18.2.1.1.1 no-access
An entry in the raisecomOpticalTransceiverInfoTable.
                       raisecomOpticalTransceiverType 1.3.6.1.4.1.8886.1.18.2.1.1.1.1 integer read-only
This object specifies the physical type of the transceiver, such as xfp or sfp , and so on. this object belongs to xfp and sfp. Enumeration: 'gbic': 2, 'soldered': 3, 'unknown': 1, 'xpak': 10, 'xenpak': 6, 'sfp': 4, 'xff': 8, 'xbi': 5, 'xfp-e': 9, 'x2': 11, 'xfp': 7, 'sfpj': 12.
                       raisecomOpticalTransceiverConnectorType 1.3.6.1.4.1.8886.1.18.2.1.1.1.2 integer read-only
This object specifies the connector type of the transceiver, unknown, sc, db9, hssdc, bnc-tnc, fiber-coaxial-head, fiber-outlet, lc, mt-rj, mu, sg, fiber-pigtail, mpo-parallel-optic , hssdcII, copper, rj45. this object belongs to xfp and sfp. Enumeration: 'db9': 2, 'fiber-pigtail': 11, 'mpo-parallel-optic': 12, 'lc': 7, 'copper': 21, 'unknown': 0, 'fiber-jack': 6, 'rj45': 22, 'bnc-tnc': 4, 'hssdc': 3, 'm': 9, 'hssdcII': 20, 'fiber-coaxial-head': 5, 'sc': 1, 'sg': 10, 'mt-rj': 8.
                       raisecomOpticalTransceiverVendorName 1.3.6.1.4.1.8886.1.18.2.1.1.1.3 octet string read-only
Vendor name of the interface. this object belongs to xfp and sfp.
                       raisecomOpticalTransceiverVendorPN 1.3.6.1.4.1.8886.1.18.2.1.1.1.4 octet string read-only
Vendor part number of the interface. this object belongs to xfp and sfp.
                       raisecomOpticalTransceiverVendorSN 1.3.6.1.4.1.8886.1.18.2.1.1.1.5 octet string read-only
Vendor serial number of the interface. this object belongs to xfp and sfp.
                       raisecomOpticalTransceiverMediaType 1.3.6.1.4.1.8886.1.18.2.1.1.1.6 integer read-only
Types of the fiber, single-mode, multi-modeE50, multi-mode50,multi-mode625,copper. single-modeKm,multi-modeOM3 this object belongs to xfp and sfp. Enumeration: 'copper': 5, 'single-modeKm': 6, 'multi-mode625': 4, 'multi-modeOM3': 7, 'multi-modeE50': 2, 'multi-mode50': 3, 'single-mode': 1.
                       raisecomOpticalTransceiverTransmissionDistance 1.3.6.1.4.1.8886.1.18.2.1.1.1.7 integer32 read-only
The max distance which the interface could transmit, measured in meter. The object will be shown in unit of Km, and the precision is 0.001. this object belongs to xfp and sfp.
                       raisecomOpticalTransceiverAbility 1.3.6.1.4.1.8886.1.18.2.1.1.1.8 unsigned32 read-only
This object specifies the ability of optical module digitaldiagnotic funtion. Currently, the digitaldiagnotic objects of our optical module inculde 16 parameters. this object has 32 bits, each bit represents a digital diagnotic parameter. if the bit value is 0, it means that the optical module does not provide digital diagnotic funtion for relative parameter.if the bit value is 1,it means that the optical module provides digital diagnotic funtion for relative parameter. this object belongs to xfp and sfp. The relation between parameters and bits is following: 32......16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1: The relation between parameters and bits is following: 32......16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1: But when the optical module is sfp, the 6 bit will represents the supplyVoltage of sfp.
                       raisecomOpticalTransceiverDDM 1.3.6.1.4.1.8886.1.18.2.1.1.1.9 integer read-only
This object specifies if the transceiver supports on digital diagnostic function, support or not support.To the xfp, the default value of this object is support. this object belongs to xfp and sfp. Enumeration: 'support': 1, 'notsupport': 2.
                       raisecomOpticalTransceiverCalibrationType 1.3.6.1.4.1.8886.1.18.2.1.1.1.10 integer read-only
This object specifies the calibration type of the transceiver, internal, external, unknown. this object belongs to xfp and sfp. Enumeration: 'unknown': 1, 'internal': 2, 'external': 3.
                       raisecomOpticalTransceiverRSSI 1.3.6.1.4.1.8886.1.18.2.1.1.1.11 integer read-only
This object specifies the calibration type of the transceiver, support or not support. this object belongs to xfp and sfp. Enumeration: 'support': 1, 'notsupport': 2.
                       raisecomOpticalTransceiverVendorRev 1.3.6.1.4.1.8886.1.18.2.1.1.1.12 octet string read-only
the version number of the transceiver. this object belongs to xfp and sfp.
                       raisecomOpticalTransceiverBRMax 1.3.6.1.4.1.8886.1.18.2.1.1.1.13 integer read-only
the min data rate of the transceiver,mesured in Mbps . this object belongs to xfp and sfp. The object will be shown in unit of Gbps, and the precision is 0.1.
                       raisecomOpticalTransceiverBRMin 1.3.6.1.4.1.8886.1.18.2.1.1.1.14 integer read-only
the min data rate of the transceiver,mesured in Mbps. this object belongs to xfp and sfp.To the sfp, the min data rate value is equal to the max data rate value. The object will be shown in unit of Gbps, and the precision is 0.1.
                       raisecomOpticalTransceiverWavelengthContrl 1.3.6.1.4.1.8886.1.18.2.1.1.1.15 integer read-only
if the transceiver supports on wavelength control support,notsupport. this object belongs to xfp. Enumeration: 'support': 1, 'notsupport': 2.
                       raisecomOpticalTransceiverWavelength 1.3.6.1.4.1.8886.1.18.2.1.1.1.16 integer32 read-only
Wavelength of the interface, measured in pm(0.001nm). this object belongs to xfp. The object will be shown in unit of nm, and the precision is 0.01.
                       raisecomOpticalTransceiverWaveTolerance 1.3.6.1.4.1.8886.1.18.2.1.1.1.17 octet string read-only
the range of laser wavelength from nominal wavelength,mesured in pm(0.001*nm). this object belongs to xfp. The object will be shown in unit of nm, and the precision is 0.01.
                       raisecomOpticalTransceiverCompatibility 1.3.6.1.4.1.8886.1.18.2.1.1.1.18 octet string read-only
the compatibility type that the transceiver supports,such as 10GBASE-SR. this object belongs to xfp.
                       raisecomOpticalTransceiverPowerDissipation 1.3.6.1.4.1.8886.1.18.2.1.1.1.19 integer read-only
the max power dissipation of the transceiver, p1W5,p2W5,p3W5,exceed3W5. this object belongs to xfp. Enumeration: 'p2W5': 2, 'p3W5': 3, 'p1W5': 1, 'exceed': 4.
                       raisecomOpticalTransceiverCDR 1.3.6.1.4.1.8886.1.18.2.1.1.1.20 integer read-only
the optical module supports on CDR fundtion. support,notsupport. this object belongs to xfp. Enumeration: 'support': 1, 'notsupport': 2.
                       raisecomOpticalTransceiverRefClock 1.3.6.1.4.1.8886.1.18.2.1.1.1.21 integer read-only
if the transceiver requires outside reference clock required,notrequired. this object belongs to xfp. Enumeration: 'required': 1, 'notrequired': 2.
                       raisecomOpticalTransceiverTransmitterType 1.3.6.1.4.1.8886.1.18.2.1.1.1.22 integer read-only
The transmitter type of the transceiver,such as 850 nm VCSEL. this object belongs to xfp. Enumeration: 'dfb1550nm': 6, 'copper-others': 9, 'vcsel1310nm': 2, 'vcsel850nm': 1, 'vcsel1550nm': 3, 'eml1310nm': 7, 'eml1550nm': 8, 'fp1310nm': 4, 'dfb1310nm': 5.
                       raisecomOpticalTransceiverCooled 1.3.6.1.4.1.8886.1.18.2.1.1.1.24 integer read-only
The transmitter cooled type of the transceiver cooled,uncooled. this object belongs to xfp. Enumeration: 'uncooled': 2, 'cooled': 1.
                       raisecomOpticalTransceiverTunalbe 1.3.6.1.4.1.8886.1.18.2.1.1.1.25 integer read-only
The transmitter tunable type of the transceiver tunable,untunable. this object belongs to xfp. Enumeration: 'untunable': 2, 'tunable': 1.
                       raisecomOpticalTransceiverDetectorType 1.3.6.1.4.1.8886.1.18.2.1.1.1.26 integer read-only
The detector type of the transceiver pin, apd. this object belongs to xfp. Enumeration: 'apd': 2, 'pin': 1.
                       raisecomOpticalTransceiverLineLoopBack 1.3.6.1.4.1.8886.1.18.2.1.1.1.27 integer read-only
The transceiver support status of sideline loop-back control support,notsupport. this object belongs to xfp. Enumeration: 'support': 1, 'notsupport': 2.
                       raisecomOpticalTransceiverXFILoopBack 1.3.6.1.4.1.8886.1.18.2.1.1.1.28 integer read-only
The transceiver support status of XFI loop-back control support,notsupport. this object belongs to xfp. Enumeration: 'support': 1, 'notsupport': 2.
                       raisecomOpticalTransceiverVps 1.3.6.1.4.1.8886.1.18.2.1.1.1.29 integer read-only
This object specifies if the optical module supports on VPS support,notsupport. this object belongs to xfp. Enumeration: 'support': 1, 'notsupport': 2.
                       raisecomOpticalTransceiverTxDis 1.3.6.1.4.1.8886.1.18.2.1.1.1.30 integer read-only
The transceiver support status of software control the transmitter status support,notsupport. this object belongs to xfp. Enumeration: 'support': 1, 'notsupport': 2.
                       raisecomOpticalTransceiverStandby 1.3.6.1.4.1.8886.1.18.2.1.1.1.31 integer read-only
The transceiver support status of software control the standby mode. support,notsupport. this object belongs to xfp. Enumeration: 'support': 1, 'notsupport': 2.
                       raisecomOpticalTransceiverInVpsLowPower 1.3.6.1.4.1.8886.1.18.2.1.1.1.32 integer read-only
The VPS in low power support status of the transceiver support,notsupport. this object belongs to xfp. Enumeration: 'support': 1, 'notsupport': 2.
                       raisecomOpticalTransceiverOutVpsLowPower 1.3.6.1.4.1.8886.1.18.2.1.1.1.33 integer read-only
The VPS out low power support status of the transceiver support,notsupport. this object belongs to xfp. Enumeration: 'support': 1, 'notsupport': 2.
                       raisecomOpticalTransceiverFEC 1.3.6.1.4.1.8886.1.18.2.1.1.1.34 integer read-only
The FEC support status of transceiver support,notsupport. this object belongs to xfp. Enumeration: 'support': 1, 'notsupport': 2.
                       raisecomOpticalTransceiverCMU 1.3.6.1.4.1.8886.1.18.2.1.1.1.35 integer read-only
The CMU support status of transceiver support,notsupport. this object belongs to xfp. Enumeration: 'support': 1, 'notsupport': 2.
                       raisecomOpticalTransceiverBR 1.3.6.1.4.1.8886.1.18.2.1.1.1.36 integer read-only
This object specifies the Nominal bitrate of the transceiver, 125Mbps, 155Mbps, 622Mbps, 1.25Gbps, 2.5Gbps. this object belongs to xfp and sfp. Enumeration: 'bitrate-622Mbps': 6, 'unknown': 0, 'bitrate-155Mbps': 2, 'bitrate-2DOT5Gbps': 19, 'bitrate-1DOT25Gbps': 13, 'bitrate-125Mbps': 1.
           raisecomOpticalTransceiverDDMGroup 1.3.6.1.4.1.8886.1.18.2.2
               raisecomOpticalTransceiverDDMTable 1.3.6.1.4.1.8886.1.18.2.2.1 no-access
This table provides objects to monitor optical parameters in a network element.
                   raisecomOpticalTransceiverDDMEntry 1.3.6.1.4.1.8886.1.18.2.2.1.1 no-access
An entry in the raisecomOpticalTransceiverMonTable provides objects to monitor an optical parameter at an optical interface.
                       raisecomOpticalTransceiverParameterType 1.3.6.1.4.1.8886.1.18.2.2.1.1.1 opticalparametertype no-access
This object specifies the optical parameter that is being monitored in this entry. This object belongs to xfp/sfp.
                       raisecomOpticalTransceiverParameterValue 1.3.6.1.4.1.8886.1.18.2.2.1.1.2 opticalparametervalue read-only
This object gives the value measured for the particular optical parameter specified by the raisecomOpticalMonParameterType object. This object belongs to xfp/sfp.
                       raisecomOpticalTransceiverParamHighAlarmThresh 1.3.6.1.4.1.8886.1.18.2.2.1.1.3 opticalparametervalue read-only
This object gives the high alarm threshold on the optical parameter being monitored. An alarm condition will be raised if the value given by raisecomOpticalParameterValue goes from below the value of this object to above the value of this object, or if the initial value of raisecomOpticalParameterValue exceeds the value of this object. This alarm will be indicated in the raisecomOpticalParamAlarmStatus object. This object belongs to xfp/sfp.
                       raisecomOpticalTransceiverParamHighWarningThresh 1.3.6.1.4.1.8886.1.18.2.2.1.1.4 opticalparametervalue read-only
This object is used to set a high warning threshold on the optical parameter being monitored. A threshold crossing condition will be indicated if the value given by raisecomOpticalParameterValue goes from below the value of this object to above the value of this object, or if the initial value of raisecomOpticalParameterValue exceeds the value of this object. This alarm will be indicated in the raisecomOpticalParamAlarmStatus object. This object belongs to xfp/sfp.
                       raisecomOpticalTransceiverParamLowAlarmThresh 1.3.6.1.4.1.8886.1.18.2.2.1.1.5 opticalparametervalue read-only
This object is used to set a low alarm threshold on the optical parameter being monitored. An alarm condition will be raised if the value given by raisecomOpticalParameterValue goes from above the value of this object to below the value of this object, or if the initial value of raisecomOpticalParameterValue is lower than the value of this object. This alarm will be indicated in the raisecomOpticalParamAlarmStatus object .. This object belongs to xfp/sfp.
                       raisecomOpticalTransceiverParamLowWarningThresh 1.3.6.1.4.1.8886.1.18.2.2.1.1.6 opticalparametervalue read-only
This object is used to set a low warning threshold on the optical parameter being monitored. A threshold crossing condition will be indicated if the value given by raisecomOpticalParameterValue goes from above the value of this object to below the value of this object, or if the initial value of raisecomOpticalParameterValue object is lower than the value of this object. For network elements in the status indications, this threshold violation will be indicated in the raisecomOpticalParamAlarmStatus object . This object belongs to xfp/sfp.
                       raisecomOpticalTransceiverParamAlarmStatus 1.3.6.1.4.1.8886.1.18.2.2.1.1.7 integer read-only
This object is used to indicate the current status of the thresholds for the monitored optical parameter on the interface. If a threshold is currently being exceeded on the interface, the object will be set. Otherwise, the object will be set to 1. This object belongs to xfp/sfp. Enumeration: 'normal': 1, 'unknown': 0, 'high-warning': 3, 'low-alarm': 4, 'low-warning': 5, 'high-alarm': 2.
                       raisecomOpticalTransceiverParamAlarmLastValue 1.3.6.1.4.1.8886.1.18.2.2.1.1.8 opticalparametervalue read-only
This object indicates the optical parameter value at the last time a threshold related to a particular optical parameter was exceeded on the interface. If no threshold value is currently being exceeded, then the value '-1000000' is returned. This object belongs to xfp/sfp.
                       raisecomOpticalTransceiverParamAlarmLastChange 1.3.6.1.4.1.8886.1.18.2.2.1.1.9 timeticks read-only
This object specifies the value of sysUpTime at the last time a threshold related to a particular optical parameter was exceeded on the interface. This object belongs to xfp/sfp.
                       raisecomOpticalTransceiverDDM15MinValidIntervals 1.3.6.1.4.1.8886.1.18.2.2.1.1.10 unsigned32 read-only
This object gives the number of previous 15 minute intervals for which valid performance monitoring data has been stored on the interface. The value of this object will be n (where n is the maximum number of 15 minute intervals supported at this interface), unless the measurement was (re-)started within the last (nx15) minutes, in which case the value will be the number of previous 15 minute intervals for which the agent has some data. This object belongs to xfp/sfp.
                       raisecomOpticalTransceiverDDM24HrValidIntervals 1.3.6.1.4.1.8886.1.18.2.2.1.1.11 unsigned32 read-only
This object gives the number of previous 24 hour intervals for which valid performance monitoring data has been stored on the interface. The max value of this object is 7, it means that the user can look up 7days history information. This object belongs to xfp/sfp.
                       raisecomOpticalTransceiverDDMValidStatus 1.3.6.1.4.1.8886.1.18.2.2.1.1.12 integer read-only
This object indicates the parameter row is valid or invalid. The object value is 'valide' when the module is present and supporting digitaldiagnotic. The object value is 'invalid' when the module is absent, or when the module is present and not supporting digitaldiagnotic. This object belongs to xfp/sfp. Enumeration: 'unknown': 0, 'valid': 1, 'invalid': 2.
           raisecomOpticalTransceiverPMGroup 1.3.6.1.4.1.8886.1.18.2.3
               raisecomOpticalTransceiverPMCurrentTable 1.3.6.1.4.1.8886.1.18.2.3.1 no-access
This table contains performance monitoring data for the various optical parameters, collected over the current 15 minute or the current 24 hour interval.
                   raisecomOpticalTransceiverPMCurrentEntry 1.3.6.1.4.1.8886.1.18.2.3.1.1 no-access
An entry in the raisecomOpticalTransceiverPMCurrentTable. It contains performance monitoring data for a monitored optical parameter at an interface, collected over the current 15 minute or the current 24 hour interval.
                       raisecomOpticalTransceiverPMCurrentPeriod 1.3.6.1.4.1.8886.1.18.2.3.1.1.1 opticalpmperiod no-access
This object indicates whether the optical parameter values given in this entry are collected over the current 15 minute or the current 24 hour interval. This object belongs to xfp/sfp.
                       raisecomOpticalTransceiverPMCurrentParamType 1.3.6.1.4.1.8886.1.18.2.3.1.1.2 opticalparametertype no-access
This object specifies the optical parameter that is being monitored, in this entry. This object belongs to xfp/sfp.
                       raisecomOpticalTransceiverPMCurrentMaxParam 1.3.6.1.4.1.8886.1.18.2.3.1.1.3 opticalparametervalue read-only
This object gives the maximum value measured for the monitored optical parameter, in the current 15 minute or the current 24 hour interval. This object belongs to xfp/sfp.
                       raisecomOpticalTransceiverPMCurrentMinParam 1.3.6.1.4.1.8886.1.18.2.3.1.1.4 opticalparametervalue read-only
This object gives the minimum value measured for the monitored optical parameter, in the current 15 minute or the current 24 hour interval. This object belongs to xfp/sfp.
                       raisecomOpticalTransceiverPMCurrentMeanParam 1.3.6.1.4.1.8886.1.18.2.3.1.1.5 opticalparametervalue read-only
This object gives the average value of the monitored optical parameter, in the current 15 minute or the current 24 hour interval. This object belongs to xfp/sfp.
               raisecomOpticalTransceiverPMIntervalTable 1.3.6.1.4.1.8886.1.18.2.3.2 no-access
This table stores performance monitoring data for the various optical parameters, collected over previous intervals. This table can have entries for one complete 24 hour interval and up to 96 complete 15 minute intervals. A system is required to store at least 4 completed 15 minute intervals. The number of valid 15 minute intervals in this table is indicated by the raisecomOpticalTransceiverDDM15MinValidIntervals object and the number of valid 24 hour intervals is indicated by the raisecomOpticalTransceiverDDM24HrValidIntervals object. when the optical module is removed from the device, the relative history records will be cleaned.
                   raisecomOpticalTransceiverPMIntervalEntry 1.3.6.1.4.1.8886.1.18.2.3.2.1 no-access
An entry in the raisecomOpticalTransceiverPMIntervalTable. It contains performance monitoring data for an optical parameter, collected over a previous interval.
                       raisecomOpticalTransceiverPMIntervalPeriod 1.3.6.1.4.1.8886.1.18.2.3.2.1.1 opticalpmperiod no-access
This object indicates whether the optical parameter values, given in this entry, are collected over a period of 15 minutes or 24 hours. This object belongs to xfp/sfp.
                       raisecomOpticalTransceiverPMIntervalNumber 1.3.6.1.4.1.8886.1.18.2.3.2.1.2 integer32 no-access
A number between 1 and 96, which identifies the interval for which the set of optical parameter values is available. The interval identified by 1 is the most recently completed 15 minute or 24 hour interval, and the interval identified by N is the interval immediately preceding the one identified by N-1. This object belongs to xfp/sfp.
                       raisecomOpticalTransceiverPMIntervalParamType 1.3.6.1.4.1.8886.1.18.2.3.2.1.3 opticalparametertype no-access
This object specifies the optical parameter that is being monitored, in this entry. This object belongs to xfp/sfp.
                       raisecomOpticalTransceiverPMIntervalMaxParam 1.3.6.1.4.1.8886.1.18.2.3.2.1.4 opticalparametervalue read-only
This object gives the maximum value measured for the optical parameter, in a particular 15 minute or 24 hour interval. This object belongs to xfp/sfp.
                       raisecomOpticalTransceiverPMIntervalMinParam 1.3.6.1.4.1.8886.1.18.2.3.2.1.5 opticalparametervalue read-only
This object gives the minimum value measured for the optical parameter, in a particular 15 minute or 24 hour interval. This object belongs to xfp/sfp.
                       raisecomOpticalTransceiverPMIntervalMeanParam 1.3.6.1.4.1.8886.1.18.2.3.2.1.6 opticalparametervalue read-only
This object gives the average value of the measured optical parameter, in a particular 15 minute or 24 hour interval. This object belongs to xfp/sfp.
           raisecomOpticalTransceiverStatusGroup 1.3.6.1.4.1.8886.1.18.2.4
               raisecomOpticalTransceiverCurrentStatusTable 1.3.6.1.4.1.8886.1.18.2.4.1 no-access
This table stores the hard ware information and the information set by user of the transceiver. This object belongs to xfp/sfp.
                   raisecomOpticalTransceiverCurrentStatusEntry 1.3.6.1.4.1.8886.1.18.2.4.1.1 no-access
An entry in the raisecomOpticalTransceiverCurrentStatusTable. It contains performance monitoring data for an optical parameter, collected over a previous interval. This object belongs to xfp/sfp.
                       raisecomOpticalTransceiverHwInfoAbsStatus 1.3.6.1.4.1.8886.1.18.2.4.1.1.1 integer read-only
This object specifies if the optical module is absent present,absent. This object belongs to xfp and sfp. Enumeration: 'absent': 1, 'present': 2.
                       raisecomOpticalTransceiverHwInfoNRStatus 1.3.6.1.4.1.8886.1.18.2.4.1.1.2 integer read-only
This object specifies if the optical module is ready for operation. ready,notready. This object belongs to xfp. Enumeration: 'ready': 1, 'notready': 2.
                       raisecomOpticalTransceiverHwInfoRxLosStatus 1.3.6.1.4.1.8886.1.18.2.4.1.1.3 integer read-only
This object specifies if the optical module operation losses the receiving signal normal,loss. This object belongs to xfp. Enumeration: 'loss': 2, 'normal': 1.
                       raisecomOpticalTransceiverHwInfoStandby 1.3.6.1.4.1.8886.1.18.2.4.1.1.4 integer read-write
This object specifies if the optical module works under standby mode. normal,standby. This object belongs to xfp. Enumeration: 'standby': 2, 'normal': 1.
                       raisecomOpticalTransceiverHwInfoLaser 1.3.6.1.4.1.8886.1.18.2.4.1.1.5 integer read-write
This object specifies if the optical module laser is turned on on,off. This object belongs to xfp. Enumeration: 'on': 1, 'off': 2.
                       raisecomOpticalTransceiverWaveLengthError 1.3.6.1.4.1.8886.1.18.2.4.1.1.6 integer32 read-only
This object specifies error between the actual wavelength and the wavelength set by the user,measured in pm. This object belongs to xfp. The object will be shown in unit of nm, and the precision is 0.001.
                       raisecomOpticalTransceiverUserWaveLength 1.3.6.1.4.1.8886.1.18.2.4.1.1.7 integer32 read-write
This object specifies the wavelength value of the optical module set by user,measured in pm. This object belongs to xfp. The object will be shown in unit of nm, and the precision is 0.01.
                       raisecomOpticalTransceiverUserDataRate 1.3.6.1.4.1.8886.1.18.2.4.1.1.8 integer read-write
This object specifies the data rate of the optical module set by user,measured in Mbps. This object belongs to xfp. The object will be shown in unit of Gbps, and the precision is 0.1.
                       raisecomOpticalTransceiverUserLineLoopBack 1.3.6.1.4.1.8886.1.18.2.4.1.1.9 integer read-write
This object specifies if the sideline loop-back is tuned on , user can change the loop back mode through the object. normal,lineLoopback. This object belongs to xfp. Enumeration: 'lineLoopback': 2, 'normal': 1.
                       raisecomOpticalTransceiverUserXFILoopBack 1.3.6.1.4.1.8886.1.18.2.4.1.1.10 integer read-write
This object specifies if the XFI loop-back is tuned on user can change the loop back mode through the object. normal,xfiLoopback. This object belongs to xfp. Enumeration: 'xfiLoopback': 2, 'normal': 1.
                       raisecomOpticalTransceiverPortNotifyEnable 1.3.6.1.4.1.8886.1.18.2.4.1.1.11 enablevar read-write
This object specifies the generation of a port notifications, enable or disable. This object belongs to xfp and sfp.
                       raisecomOpticalTransceiverPortDDMEnable 1.3.6.1.4.1.8886.1.18.2.4.1.1.12 enablevar read-write
This object specifies the status of digitaldiagnotic on a port, enable or disable. This object belongs to xfp and sfp.
                       raisecomOpticalTransceiverPortCheckPwdEnable 1.3.6.1.4.1.8886.1.18.2.4.1.1.13 enablevar read-write
This object specifies the status of password checking on a port, enable or disable. This object belongs to xfp.
                       raisecomOpticalTransceiverTxFaultCount 1.3.6.1.4.1.8886.1.18.2.4.1.1.14 integer32 read-only
This object specifies the number of tx-fault signals.
                       raisecomOpticalTransceiverTxFaultCountClear 1.3.6.1.4.1.8886.1.18.2.4.1.1.15 clearvar read-write
This object specifies clear the statistcs of tx-fault signals.
                       raisecomOpticalTransceiverSpecificationCheckStatus 1.3.6.1.4.1.8886.1.18.2.4.1.1.16 integer read-only
This object specifies the check status, accord(0)specifies the optical module accord with industrial. not-accord(2) specifies the optical module not accord with industrial. Enumeration: 'none': 0, 'not-accord': 2, 'accord': 1.
                       raisecomOpticalTransceiverTxFaultStatus 1.3.6.1.4.1.8886.1.18.2.4.1.1.17 integer read-only
This object specifies the tx-fault status. Enumeration: 'tx-fault': 2, 'normal': 1.
       raisecomOpticalTransceiverNotifications 1.3.6.1.4.1.8886.1.18.3
           raisecomOpticalTransceiverAbsentTrap 1.3.6.1.4.1.8886.1.18.3.1
This notification is sent when the optical module is removed from the device. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
           raisecomOpticalTransceiverPresentTrap 1.3.6.1.4.1.8886.1.18.3.2
This notification is sent when the optical module is plugged into the device. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
           raisecomOpticalTransceiverNRAlarmTrap 1.3.6.1.4.1.8886.1.18.3.3
This notification is sent when the transmitted or received data of optical module is invalid. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
           raisecomOpticalTransceiverNRNormalTrap 1.3.6.1.4.1.8886.1.18.3.4
This notification is sent when the transmitted or received data of optical module is valid. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
           raisecomOpticalTransceiverRxLosAlarmTrap 1.3.6.1.4.1.8886.1.18.3.5
This notification is sent when the optical module receiving signal is lost. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
           raisecomOpticalTransceiverRxLosNormaTrap 1.3.6.1.4.1.8886.1.18.3.6
This notification is sent when the optical module receiving signal is back to normal. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
           raisecomOpticalTransceiverCheckPwdFailureTrap 1.3.6.1.4.1.8886.1.18.3.7
This notification is sent when the optical module password checking is failed. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
           raisecomOpticalTransceiverCheckPwdSucceedTrap 1.3.6.1.4.1.8886.1.18.3.8
This notification is sent when the optical module password cheching is successful. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
           raisecomOpticalTransceiverParamAlarmTrap 1.3.6.1.4.1.8886.1.18.3.9
This notification is sent when the optical module parameter value increase to above the high alarm threshold or dicrease to under the low alarm threshold. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
           raisecomOpticalTransceiverParamAlarmNormalTrap 1.3.6.1.4.1.8886.1.18.3.10
This notification is sent when the optical module parameter value dicrease to under the high alarm threshold or increase to above the low alarm threshold. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
           raisecomOpticalTransceiverParamWarningTrap 1.3.6.1.4.1.8886.1.18.3.11
This notification is sent when the optical module parameter value increase to above the high warning threshold or dicrease to under the low warning threshold. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
           raisecomOpticalTransceiverParamWarningNormalTrap 1.3.6.1.4.1.8886.1.18.3.12
This notification is sent when the optical module parameter value dicrease to under the high warning threshold or increase to above the low warning threshold. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
           raisecomOpticalTransceiverLaserBackLightAlarmTrap 1.3.6.1.4.1.8886.1.18.3.13
This notification is sent when the optical module password cheching is successful. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
           raisecomOpticalTransceiverLaserBackLightAlarmNormalTrap 1.3.6.1.4.1.8886.1.18.3.14
This notification is sent when the optical module password cheching is successful. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
           raisecomOpticalTransceiverLaserLifeAlarmTrap 1.3.6.1.4.1.8886.1.18.3.15
This notification is sent when the optical module password cheching is successful. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
           raisecomOpticalTransceiverLaserLifeAlarmNormalTrap 1.3.6.1.4.1.8886.1.18.3.16
This notification is sent when the optical module password cheching is successful. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
           raisecomOpticalTransceiverParamLowAlarmTrap 1.3.6.1.4.1.8886.1.18.3.17
This notification is sent when the optical module parameter value increase to above the high alarm threshold or dicrease to under the low alarm threshold. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
           raisecomOpticalTransceiverParamLowAlarmNormalTrap 1.3.6.1.4.1.8886.1.18.3.18
This notification is sent when the optical module parameter value increase to above the high alarm threshold or dicrease to under the low alarm threshold. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
           raisecomOpticalTransceiverParamLowWarningTrap 1.3.6.1.4.1.8886.1.18.3.19
This notification is sent when the optical module parameter value increase to above the high alarm threshold or dicrease to under the low alarm threshold. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
           raisecomOpticalTransceiverParamLowWarningNormalTrap 1.3.6.1.4.1.8886.1.18.3.20
This notification is sent when the optical module parameter value increase to above the high alarm threshold or dicrease to under the low alarm threshold. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
       raisecomOpticalTransceiverParamNotifications 1.3.6.1.4.1.8886.1.18.4
           raisecomOpticalTransceiverTemperatureAlarmTrap 1.3.6.1.4.1.8886.1.18.4.1
This notification is sent when the optical module Temperature value increase to above the high alarm threshold or dicrease to under the low alarm threshold. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
           raisecomOpticalTransceiverTemperatureAlarmNormalTrap 1.3.6.1.4.1.8886.1.18.4.2
This notification is sent when the optical module Temperature value dicrease to under the high alarm threshold or increase to above the low alarm threshold. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
           raisecomOpticalTransceiverTemperatureWarningTrap 1.3.6.1.4.1.8886.1.18.4.3
This notification is sent when the optical module Temperature value increase to above the high warning threshold or dicrease to under the low warning threshold. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
           raisecomOpticalTransceiverTemperatureWarningNormalTrap 1.3.6.1.4.1.8886.1.18.4.4
This notification is sent when the optical module Temperature value dicrease to under the high warning threshold or increase to above the low warning threshold. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
           raisecomOpticalTransceiverTxbiasCurrentAlarmTrap 1.3.6.1.4.1.8886.1.18.4.5
This notification is sent when the optical module Tx bias Current value increase to above the high alarm threshold or dicrease to under the low alarm threshold. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
           raisecomOpticalTransceiverTxbiasCurrentAlarmNormalTrap 1.3.6.1.4.1.8886.1.18.4.6
This notification is sent when the optical module Tx bias Current value dicrease to under the high alarm threshold or increase to above the low alarm threshold. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
           raisecomOpticalTransceiverTxbiasCurrentWarningTrap 1.3.6.1.4.1.8886.1.18.4.7
This notification is sent when the optical module Tx bias Current value increase to above the high warning threshold or dicrease to under the low warning threshold. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
           raisecomOpticalTransceiverTxbiasCurrentWarningNormalTrap 1.3.6.1.4.1.8886.1.18.4.8
This notification is sent when the optical module Tx bias Current value dicrease to under the high warning threshold or increase to above the low warning threshold. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
           raisecomOpticalTransceiverTxPowerAlarmTrap 1.3.6.1.4.1.8886.1.18.4.9
This notification is sent when the optical module Tx Power value increase to above the high alarm threshold or dicrease to under the low alarm threshold. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
           raisecomOpticalTransceiverTxPowerAlarmNormalTrap 1.3.6.1.4.1.8886.1.18.4.10
This notification is sent when the optical module Tx Power value dicrease to under the high alarm threshold or increase to above the low alarm threshold. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
           raisecomOpticalTransceiverTxPowerWarningTrap 1.3.6.1.4.1.8886.1.18.4.11
This notification is sent when the optical module Tx Power value increase to above the high warning threshold or dicrease to under the low warning threshold. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
           raisecomOpticalTransceiverTxPowerWarningNormalTrap 1.3.6.1.4.1.8886.1.18.4.12
This notification is sent when the optical module Tx Power value dicrease to under the high warning threshold or increase to above the low warning threshold. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
           raisecomOpticalTransceiverRxPowerAlarmTrap 1.3.6.1.4.1.8886.1.18.4.13
This notification is sent when the optical module Rx Power value increase to above the high alarm threshold or dicrease to under the low alarm threshold. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
           raisecomOpticalTransceiverRxPowerWarningTrap 1.3.6.1.4.1.8886.1.18.4.14
This notification is sent when the optical module Rx Power value increase to above the high warning threshold or dicrease to under the low warning threshold. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
           raisecomOpticalTransceiverRxPowerWarningNormalTrap 1.3.6.1.4.1.8886.1.18.4.15
This notification is sent when the optical module Rx Power value dicrease to under the high warning threshold or increase to above the low warning threshold. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
           raisecomOpticalTransceiverRxPowerAlarmNormalTrap 1.3.6.1.4.1.8886.1.18.4.16
This notification is sent when the optical module Rx Power value dicrease to under the high alarm threshold or increase to above the low alarm threshold. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
           raisecomOpticalTransceiverLaserTemperatureAlarmTrap 1.3.6.1.4.1.8886.1.18.4.17
This notification is sent when the optical module Laser Temperature value increase to above the high alarm threshold or dicrease to under the low alarm threshold. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
           raisecomOpticalTransceiverLaserTemperatureWarningTrap 1.3.6.1.4.1.8886.1.18.4.18
This notification is sent when the optical module Laser Temperature value increase to above the high warning threshold or dicrease to under the low warning threshold. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
           raisecomOpticalTransceiverLaserTemperatureWarningNormalTrap 1.3.6.1.4.1.8886.1.18.4.19
This notification is sent when the optical module Laser Temperature value dicrease to under the high warning threshold or increase to above the low warning threshold. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
           raisecomOpticalTransceiverLaserTemperatureAlarmNormalTrap 1.3.6.1.4.1.8886.1.18.4.20
This notification is sent when the optical module Laser Temperature value dicrease to under the high alarm threshold or increase to above the low alarm threshold. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
           raisecomOpticalTransceiverP5V0supplyVoltageAlarmTrap 1.3.6.1.4.1.8886.1.18.4.21
This notification is sent when the optical module +5.0V supply Voltage value increase to above the high alarm threshold or dicrease to under the low alarm threshold. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
           raisecomOpticalTransceiverP5V0supplyVoltageWarningTrap 1.3.6.1.4.1.8886.1.18.4.22
This notification is sent when the optical module +5.0V supply Voltage value increase to above the high warning threshold or dicrease to under the low warning threshold. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
           raisecomOpticalTransceiverP5V0supplyVoltageWarningNormalTrap 1.3.6.1.4.1.8886.1.18.4.23
This notification is sent when the optical module +5.0V supply Voltage value dicrease to under the high warning threshold or increase to above the low warning threshold. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
           raisecomOpticalTransceiverP5V0supplyVoltageAlarmNormalTrap 1.3.6.1.4.1.8886.1.18.4.24
This notification is sent when the optical module +5.0V supply Voltage value dicrease to under the high alarm threshold or increase to above the low alarm threshold. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
           raisecomOpticalTransceiverP3V3supplyVoltageAlarmTrap 1.3.6.1.4.1.8886.1.18.4.25
This notification is sent when the optical module +3.3V supply Voltage value increase to above the high alarm threshold or dicrease to under the low alarm threshold. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
           raisecomOpticalTransceiverP3V3supplyVoltageWarningTrap 1.3.6.1.4.1.8886.1.18.4.26
This notification is sent when the optical module +3.3V supply Voltage value increase to above the high warning threshold or dicrease to under the low warning threshold. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
           raisecomOpticalTransceiverP3V3supplyVoltageWarningNormalTrap 1.3.6.1.4.1.8886.1.18.4.27
This notification is sent when the optical module +3.3V supply Voltage value dicrease to under the high warning threshold or increase to above the low warning threshold. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
           raisecomOpticalTransceiverP3V3supplyVoltageAlarmNormalTrap 1.3.6.1.4.1.8886.1.18.4.28
This notification is sent when the optical module +3.3V supply Voltage value dicrease to under the high alarm threshold or increase to above the low alarm threshold. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
           raisecomOpticalTransceiverP1V8supplyVoltageAlarmTrap 1.3.6.1.4.1.8886.1.18.4.29
This notification is sent when the optical module +1.8v supply Voltage value increase to above the high alarm threshold or dicrease to under the low alarm threshold. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
           raisecomOpticalTransceiverP1V8supplyVoltageWarningTrap 1.3.6.1.4.1.8886.1.18.4.30
This notification is sent when the optical module +1.8v supply Voltage value increase to above the high warning threshold or dicrease to under the low warning threshold. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
           raisecomOpticalTransceiverP1V8supplyVoltageWarningNormalTrap 1.3.6.1.4.1.8886.1.18.4.31
This notification is sent when the optical module +1.8v supply Voltage value dicrease to under the high warning threshold or increase to above the low warning threshold. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
           raisecomOpticalTransceiverP1V8supplyVoltageAlarmNormalTrap 1.3.6.1.4.1.8886.1.18.4.32
This notification is sent when the optical module +1.8v supply Voltage value dicrease to under the high alarm threshold or increase to above the low alarm threshold. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
           raisecomOpticalTransceiverN5V2supplyVoltageAlarmTrap 1.3.6.1.4.1.8886.1.18.4.33
This notification is sent when the optical module -5.2v supply Voltage value increase to above the high alarm threshold or dicrease to under the low alarm threshold. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
           raisecomOpticalTransceiverN5V2supplyVoltageWarningTrap 1.3.6.1.4.1.8886.1.18.4.34
This notification is sent when the optical module -5.2v supply Voltage value increase to above the high warning threshold or dicrease to under the low warning threshold. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
           raisecomOpticalTransceiverN5V2supplyVoltageWarningNormalTrap 1.3.6.1.4.1.8886.1.18.4.35
This notification is sent when the optical module -5.2v supply Voltage value dicrease to under the high warning threshold or increase to above the low warning threshold. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
           raisecomOpticalTransceiverN5V2supplyVoltageAlarmNormalTrap 1.3.6.1.4.1.8886.1.18.4.36
This notification is sent when the optical module -5.2v supply Voltage value dicrease to under the high alarm threshold or increase to above the low alarm threshold. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
           raisecomOpticalTransceiverApdBiasVoltageAlarmTrap 1.3.6.1.4.1.8886.1.18.4.37
This notification is sent when the optical module APD Bias Voltage value increase to above the high alarm threshold or dicrease to under the low alarm threshold. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
           raisecomOpticalTransceiverApdBiasVoltageWarningTrap 1.3.6.1.4.1.8886.1.18.4.38
This notification is sent when the optical module APD Bias Voltage value increase to above the high warning threshold or dicrease to under the low warning threshold. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
           raisecomOpticalTransceiverApdBiasVoltageWarningNormalTrap 1.3.6.1.4.1.8886.1.18.4.39
This notification is sent when the optical module APD Bias Voltage value dicrease to under the high warning threshold or increase to above the low warning threshold. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
           raisecomOpticalTransceiverApdBiasVoltageAlarmNormalTrap 1.3.6.1.4.1.8886.1.18.4.40
This notification is sent when the optical module APD Bias Voltage value dicrease to under the high alarm threshold or increase to above the low alarm threshold. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
           raisecomOpticalTransceiverP5V0supplyCurrentAlarmTrap 1.3.6.1.4.1.8886.1.18.4.41
This notification is sent when the optical module +5.0V supply Current value increase to above the high alarm threshold or dicrease to under the low alarm threshold. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
           raisecomOpticalTransceiverP5V0supplyCurrentWarningTrap 1.3.6.1.4.1.8886.1.18.4.42
This notification is sent when the optical module +5.0V supply Current value increase to above the high warning threshold or dicrease to under the low warning threshold. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
           raisecomOpticalTransceiverP5V0supplyCurrentWarningNormalTrap 1.3.6.1.4.1.8886.1.18.4.43
This notification is sent when the optical module +5.0V supply Current value dicrease to under the high warning threshold or increase to above the low warning threshold. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
           raisecomOpticalTransceiverP5V0supplyCurrentAlarmNormalTrap 1.3.6.1.4.1.8886.1.18.4.44
This notification is sent when the optical module +5.0V supply Current value dicrease to under the high alarm threshold or increase to above the low alarm threshold. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
           raisecomOpticalTransceiverP3V3supplyCurrentAlarmTrap 1.3.6.1.4.1.8886.1.18.4.45
This notification is sent when the optical module +3.3V supply Current value increase to above the high alarm threshold or dicrease to under the low alarm threshold. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
           raisecomOpticalTransceiverP3V3supplyCurrentWarningTrap 1.3.6.1.4.1.8886.1.18.4.46
This notification is sent when the optical module +3.3V supply Current value increase to above the high warning threshold or dicrease to under the low warning threshold. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
           raisecomOpticalTransceiverP3V3supplyCurrentWarningNormalTrap 1.3.6.1.4.1.8886.1.18.4.47
This notification is sent when the optical module +3.3V supply Current value dicrease to under the high warning threshold or increase to above the low warning threshold. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
           raisecomOpticalTransceiverP3V3supplyCurrentAlarmNormalTrap 1.3.6.1.4.1.8886.1.18.4.48
This notification is sent when the optical module +3.3V supply Current value dicrease to under the high alarm threshold or increase to above the low alarm threshold. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
           raisecomOpticalTransceiverP1V8supplyCurrentAlarmTrap 1.3.6.1.4.1.8886.1.18.4.49
This notification is sent when the optical module +1.8V supply Current value increase to above the high alarm threshold or dicrease to under the low alarm threshold. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
           raisecomOpticalTransceiverP1V8supplyCurrentWarningTrap 1.3.6.1.4.1.8886.1.18.4.50
This notification is sent when the optical module +1.8V supply Current value increase to above the high warning threshold or dicrease to under the low warning threshold. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
           raisecomOpticalTransceiverP1V8supplyCurrentWarningNormalTrap 1.3.6.1.4.1.8886.1.18.4.51
This notification is sent when the optical module +1.8V supply Current value dicrease to under the high warning threshold or increase to above the low warning threshold. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
           raisecomOpticalTransceiverP1V8supplyCurrentAlarmNormalTrap 1.3.6.1.4.1.8886.1.18.4.52
This notification is sent when the optical module +1.8V supply Current value dicrease to under the high alarm threshold or increase to above the low alarm threshold. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
           raisecomOpticalTransceiverN5V2supplyCurrentAlarmTrap 1.3.6.1.4.1.8886.1.18.4.53
This notification is sent when the optical module -5.2V supply Current value increase to above the high alarm threshold or dicrease to under the low alarm threshold. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
           raisecomOpticalTransceiverN5V2supplyCurrentWarningTrap 1.3.6.1.4.1.8886.1.18.4.54
This notification is sent when the optical module -5.2V supply Current value increase to above the high warning threshold or dicrease to under the low warning threshold. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
           raisecomOpticalTransceiverN5V2supplyCurrentWarningNormalTrap 1.3.6.1.4.1.8886.1.18.4.55
This notification is sent when the optical module -5.2V supply Current value dicrease to under the high warning threshold or increase to above the low warning threshold. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
           raisecomOpticalTransceiverN5V2supplyCurrentAlarmNormalTrap 1.3.6.1.4.1.8886.1.18.4.56
This notification is sent when the optical module -5.2V supply Current value dicrease to under the high alarm threshold or increase to above the low alarm threshold. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
           raisecomOpticalTransceiverTecCurrentAlarmTrap 1.3.6.1.4.1.8886.1.18.4.57
This notification is sent when the optical module TecCurrent value increase to above the high alarm threshold or dicrease to under the low alarm threshold. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
           raisecomOpticalTransceiverTecCurrentWarningTrap 1.3.6.1.4.1.8886.1.18.4.58
This notification is sent when the optical module TecCurrent value increase to above the high warning threshold or dicrease to under the low warning threshold. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
           raisecomOpticalTransceiverTecCurrentWarningNormalTrap 1.3.6.1.4.1.8886.1.18.4.59
This notification is sent when the optical module TecCurrent value dicrease to under the high warning threshold or increase to above the low warning threshold. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
           raisecomOpticalTransceiverTecCurrentAlarmNormalTrap 1.3.6.1.4.1.8886.1.18.4.60
This notification is sent when the optical module TecCurrent value dicrease to under the high alarm threshold or increase to above the low alarm threshold. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
           raisecomOpticalTransceiverLaserWavelengthAlarmTrap 1.3.6.1.4.1.8886.1.18.4.61
This notification is sent when the optical module laserWavelength value increase to above the high alarm threshold or dicrease to under the low alarm threshold. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
           raisecomOpticalTransceiverLaserWavelengthWarningTrap 1.3.6.1.4.1.8886.1.18.4.62
This notification is sent when the optical module laserWavelength value increase to above the high warning threshold or dicrease to under the low warning threshold. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
           raisecomOpticalTransceiverLaserWavelengthWarningNormalTrap 1.3.6.1.4.1.8886.1.18.4.63
This notification is sent when the optical module laserWavelength value dicrease to under the high warning threshold or increase to above the low warning threshold. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
           raisecomOpticalTransceiverLaserWavelengthAlarmNormalTrap 1.3.6.1.4.1.8886.1.18.4.64
This notification is sent when the optical module laserWavelength value dicrease to under the high alarm threshold or increase to above the low alarm threshold. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
           raisecomOpticalTransceiverTxFaultTrap 1.3.6.1.4.1.8886.1.18.4.65
This notification is sent when the SFP optical module occures Tx-fault signal. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.
           raisecomOpticalTransceiverTxNormalTrap 1.3.6.1.4.1.8886.1.18.4.66
This notification is sent when the SFP optical module cancels the Tx-fault signal. This notification may be suppressed under the following conditions: - depending on the value of the raisecomOpticalNotifyEnable and raisecomOpticalPortNotifyEnable objects.