RAISECOM-LINKAGGREGATION-MIB: View SNMP OID List / Download MIB

VENDOR: BEIJING RAISECOM SCIENTIFIC N TECHNOLOGY DEV.


 Home MIB: RAISECOM-LINKAGGREGATION-MIB
Download as:   

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 rcLinkAggregation 1.3.6.1.4.1.8886.6.1.6
The MIB module for managing link aggregation of switch.
     rcLinkAggregationStatus 1.3.6.1.4.1.8886.6.1.6.1 enablevar read-write
Enable or disable link aggregation.
     rcLinkAggregationLoadSharingMode 1.3.6.1.4.1.8886.6.1.6.2 integer read-write
The Rule to be applied to this Link Aggregator's Trunk Group Table. The rules are based on the following selections SrcMAC (1), means that the last three bits of the Source MAC Address are used to index the Trunk Group to get the destination port. DestMAC (2), means the last three bits of the Destination MAC Address are used to index into the Trunk Group to get the destination port. SrcXORDestMAC (3), means that the last three bits of the Source MAC Address are logically XORed with the last three bits of the Destination MAC Address and used to index into the Trunk Group to get the destination port. SrcIP (4), means the last three bits of the Source IP Address are used to index into the Trunk Group to get the destination port. DestIP (5), means the last three bits of the Destination IP Address are used to index into the Trunk Group to get the destination port. SrcXORDestIP (6), means the last three bits of the Source IP Address are logically XORed with the last three bits of the Destination IP Address and used to index into the Trunk Group to get the destination port. This rule defines the distribution algorithm applied to the aggregated link. Enumeration: 'srcMAC': 1, 'destMAC': 2, 'destIP': 5, 'srcXORDestIP': 6, 'srcIP': 4, 'srcXORDestMACXORSrcPort': 7, 'srcXORDestMAC': 3.
     rcLinkAggregationTicketGenerationAlgorithm 1.3.6.1.4.1.8886.6.1.6.3 integer read-write
There are two algorithm to generate trunk ticket: direct-map and crc. Direct-map uses the last two bits of mac address as the trunk ticket; Crc uses crc algorithm on all mac address to generate trunk ticket. Enumeration: 'crc': 2, 'direct-map': 1.
     rcLinkAggregationMaxGroup 1.3.6.1.4.1.8886.6.1.6.4 integer read-only
The number of maximum link aggregation group that system supports.
     rcLinkAggregationGroupTable 1.3.6.1.4.1.8886.6.1.6.5 no-access
Some ports participate in a link aggregation group.
         rcLinkAggregationGroupEntry 1.3.6.1.4.1.8886.6.1.6.5.1 no-access
The entry is used to set some ports into a link aggregation group.
             rcLinkAggregationGroupID 1.3.6.1.4.1.8886.6.1.6.5.1.1 integer no-access
The link aggregation group ID.
             rcLinkAggregationGroupSettingPorts 1.3.6.1.4.1.8886.6.1.6.5.1.2 portlist read-write
When a bit of PortList is set, the port this bit specified participate in a appointed link aggregation group.
             rcLinkAggregationGroupCurrentPorts 1.3.6.1.4.1.8886.6.1.6.5.1.3 portlist read-only
Show these ports that are in active status in a link aggregation group.
             rcLinkAggregationGroupMode 1.3.6.1.4.1.8886.6.1.6.5.1.4 integer read-write
Show these ports that are in active status in a link aggregation group. Enumeration: 'lacp-backup': 5, 'lacp-static': 2, 'manual': 1, 'other': 255, 'lacp-dynamic': 3, 'manual-backup': 4.
             rcLinkAggregationGroupMinLinks 1.3.6.1.4.1.8886.6.1.6.5.1.5 integer read-write
The link aggregation group ID.
             rcLinkAggregationGroupMaxLinks 1.3.6.1.4.1.8886.6.1.6.5.1.6 integer read-write
The link aggregation group ID.
             rcLinkAggregationGroupSettingPorts64 1.3.6.1.4.1.8886.6.1.6.5.1.7 octet string read-write
When a bit of PortList is set, the port this bit specified participate in a appointed link aggregation group.It is used when the device has more than 256 ports.
             rcLinkAggregationGroupCurrentPorts64 1.3.6.1.4.1.8886.6.1.6.5.1.8 octet string read-only
Show these ports that are in active status in a link aggregation group. It is used when the device has more than 256 ports.
             rcLinkAggregationMasterPort 1.3.6.1.4.1.8886.6.1.6.5.1.9 integer read-write
set master port in a link aggregation group .
             rcLinkAggregationRestoreMode 1.3.6.1.4.1.8886.6.1.6.5.1.10 integer read-write
set restore mode in a link aggregation group . Enumeration: 'non-revertive': 2, 'revertive': 1.
             rcLinkAggregationRestoreDelayTimer 1.3.6.1.4.1.8886.6.1.6.5.1.11 integer read-write
set port delay time from the fault recovery in a link aggregation group .
     rcLinkAggregationPortStatsClearTable 1.3.6.1.4.1.8886.6.1.6.6 no-access
Clear link aggregation group stattistics table.
         rcLinkAggregationPortStatsClearEntry 1.3.6.1.4.1.8886.6.1.6.6.1 no-access
The entry is used to clear statistics of a link aggregation group.
             rcLinkAggregationPortStatsClear 1.3.6.1.4.1.8886.6.1.6.6.1.1 truthvalue read-write
Clear link aggregation group port statistics.
     rcLinkAggregationPortLACPTable 1.3.6.1.4.1.8886.6.1.6.7 no-access
Enable or disable LACP table.
         rcLinkAggregationPortLACPEntry 1.3.6.1.4.1.8886.6.1.6.7.1 no-access
The entry is used to enable or disable LACP of a port.
             rcLinkAggregationPortLACPEnable 1.3.6.1.4.1.8886.6.1.6.7.1.1 enablevar read-write
Enable or disable LACP.
     rcLinkAggregationDestMacAddress 1.3.6.1.4.1.8886.6.1.6.8 macaddress read-write
Specifies the destination MAC address of the provider network LACP PDUs.