RAISECOM-ELPS-MIB: View SNMP OID List / Download MIB

VENDOR: BEIJING RAISECOM SCIENTIFIC N TECHNOLOGY DEV.


 Home MIB: RAISECOM-ELPS-MIB
Download as:   
SNMPv2-CONF, RAISECOM-BASE-MIB, SNMPv2-SMI, SNMPv2-TC, SWITCH-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 rcElps 1.3.6.1.4.1.8886.6.1.54
description of ethernet linear protection switching managed object.
       rcElpsBaseGroup 1.3.6.1.4.1.8886.6.1.54.1
           rcElpsTrapEnable 1.3.6.1.4.1.8886.6.1.54.1.1 enablevar read-only
Indicates whether traps for G.8031 should be generated or not.
           rcElpsCfgTable 1.3.6.1.4.1.8886.6.1.54.1.2 no-access
A table of elps configuration and associated properties.
               rcElpsCfgEntry 1.3.6.1.4.1.8886.6.1.54.1.2.1 no-access
Table entry for elps configuration and associated properties.
                   rcElpsId 1.3.6.1.4.1.8886.6.1.54.1.2.1.1 unsigned32 no-access
An index uniquely identifies a Linear Protection, which ranges from 1~8. This value can't be modified after created.
                   rcElpsName 1.3.6.1.4.1.8886.6.1.54.1.2.1.2 octet string read-only
Name for the associtaed Linear protection.
                   rcElpsWorkingPort 1.3.6.1.4.1.8886.6.1.54.1.2.1.3 integer32 read-only
The port of working transport entity.
                   rcElpsWorkingBlockVlanlist 1.3.6.1.4.1.8886.6.1.54.1.2.1.4 vlanset read-only
The block Vlan list for working entity.
                   rcElpsProtectionPort 1.3.6.1.4.1.8886.6.1.54.1.2.1.5 integer32 read-only
The port of protection.transport entity.
                   rcElpsProtectionBlockVlanlist 1.3.6.1.4.1.8886.6.1.54.1.2.1.6 vlanset read-only
The block Vlan list for protection entity.
                   rcElpsProtectionTypeAdmin 1.3.6.1.4.1.8886.6.1.54.1.2.1.7 unsigned32 read-only
The protection type configured locally.
                   rcElpsProtectionTypeOper 1.3.6.1.4.1.8886.6.1.54.1.2.1.8 unsigned32 read-only
The protection type coordinated with the far end.
                   rcElpsForceSwitch 1.3.6.1.4.1.8886.6.1.54.1.2.1.9 truthvalue read-write
Forces normal traffic signal to be selected from the protection transport entity.
                   rcElpsManualSwitch 1.3.6.1.4.1.8886.6.1.54.1.2.1.10 truthvalue read-write
In the absence of a failure of a working or protection transport entity, forces normal traffic signal to be selected from the protection transport entity.
                   rcElpsManualSwitchtoWork 1.3.6.1.4.1.8886.6.1.54.1.2.1.11 truthvalue read-write
In the absence of a failure of a working or protection transport entity in non-revertive operation, forces normal traffic signal to be selected from the working transport entity.
                   rcElpsLockout 1.3.6.1.4.1.8886.6.1.54.1.2.1.12 truthvalue read-write
This command prevents a working signal from being selected from the protection transport entity. This effectively disables the protection group.
                   rcElpsClear 1.3.6.1.4.1.8886.6.1.54.1.2.1.13 truthvalue read-write
Clears the active near end Lockout of Protection, Forced Switch, Manual Switch, or WTR state.
                   rcElpsWtrTimer 1.3.6.1.4.1.8886.6.1.54.1.2.1.14 unsigned32 read-write
In revertive mode of operation, to prevent frequent operation of the protection switch due to an intermittent defect, a failed working transport entity must become fault-free. After the failed working transport entity meets this criterion, a fixed period of time shall elapse before a normal traffic signal uses it again. This period, called wait-to-restore (WTR) period, may be configured by the operator in 1 minute steps between 5 and 12 minutes; the default value is 5 minutes.
                   rcElpsHoldOffTimer 1.3.6.1.4.1.8886.6.1.54.1.2.1.15 unsigned32 read-write
When a new defect or more severe defect occurs (new SF), this event will not be reported immediately to protection switching if the provisioned holdoff timer value is non-zero. Instead, the holdoff timer will be started. When the holdoff timer expires, whether a defect still exists on the trail that started the timer will be checked. If one does exist, that defect will be reported to protection switching. Each protection group should have a provisionable holdoff timer. The suggested range of the holdoff timer is 0 to 10 seconds in steps of 100 ms with an accuracy of 5 ms.
                   rcElpsProtocolVlan 1.3.6.1.4.1.8886.6.1.54.1.2.1.16 integer read-only
Protocol vlan for APS packet encapsulation.
                   rcElpsStatus 1.3.6.1.4.1.8886.6.1.54.1.2.1.17 integer read-only
Ethernet linear protection status.The default state is No Request (Working/Active Protection/Standby). Enumeration: 'ms-w': 8, 'wtr': 9, 'fs': 4, 'sf-p': 6, 'lo': 3, 'sf-w': 5, 'ms': 7, 'dnr': 10, 'nr-p': 2, 'nr-w': 1.
                   rcElpsDfopStatus 1.3.6.1.4.1.8886.6.1.54.1.2.1.18 integer read-only
Elps dFOP status.When the APS protocol is running regularly, the status in normal.If failure of protocol is detected, the status is dFOP-CM,dFOP-PM or dFOP-NR according to the cause of dFOP.The default state is normal. Enumeration: 'dFOP-NR': 4, 'dFOP-CM': 2, 'dFOP-PM': 3, 'normal': 1.
                   rcElpsRowStatus 1.3.6.1.4.1.8886.6.1.54.1.2.1.19 rowstatus read-only
This object is responsible for managing the creation, deletion and modification of rows, which support active status and CreatAndGo, destroy operation.
           rcElpsStatisticsTable 1.3.6.1.4.1.8886.6.1.54.1.3 no-access
Statistics Table of Ethernet Linear Protection Switching.
               rcElpsStatisticsEntry 1.3.6.1.4.1.8886.6.1.54.1.3.1 no-access
Table entry for elps statistics information.
                   rcElpsStatisticsSwitchCounts 1.3.6.1.4.1.8886.6.1.54.1.3.1.1 unsigned32 read-only
Counts of switching from working transport entity to protection transport entity or from protection transport entity to working transport entity.
                   rcElpsStatisticsApsTx 1.3.6.1.4.1.8886.6.1.54.1.3.1.2 unsigned32 read-only
APS packet number sent to the far end.
                   rcElpsStatisticsApsRx 1.3.6.1.4.1.8886.6.1.54.1.3.1.3 unsigned32 read-only
APS packet number received from the far end.
                   rcElpsStatisticsLastStatusOccur 1.3.6.1.4.1.8886.6.1.54.1.3.1.4 timeticks read-only
Time when last status changes.
                   rcElpsStatisticsLastSwitchOccur 1.3.6.1.4.1.8886.6.1.54.1.3.1.5 timeticks read-only
Time when last linear protection switching happens.
                   rcElpsStatisticsLastDfop 1.3.6.1.4.1.8886.6.1.54.1.3.1.6 timeticks read-only
Time when last dFOP happens.
                   rcElpsStatisticsClear 1.3.6.1.4.1.8886.6.1.54.1.3.1.7 enablevar read-write
Clear statistics information of linear protection.
           rcElpsPeerTable 1.3.6.1.4.1.8886.6.1.54.1.4 no-access
Elps information of the far end.
               rcElpsPeerEntry 1.3.6.1.4.1.8886.6.1.54.1.4.1 no-access
Table entry for elps information of the far end.
                   rcElpsPeerProtectionType 1.3.6.1.4.1.8886.6.1.54.1.4.1.1 unsigned32 read-only
The protection type of the far end.
                   rcElpsPeerStatus 1.3.6.1.4.1.8886.6.1.54.1.4.1.2 integer read-only
Ethernet linear protection status of the far end.The default state is No Request (Working/Active Protection/Standby). Enumeration: 'ms-w': 8, 'wtr': 9, 'fs': 4, 'sf-p': 6, 'exer': 12, 'rr': 13, 'lo': 3, 'sf-w': 5, 'ms': 7, 'dnr': 10, 'nr-p': 2, 'nr-w': 1, 'sd': 11.
                   rcElpsRequestSignal 1.3.6.1.4.1.8886.6.1.54.1.4.1.3 integer read-only
Request Signal from received APS packet. Enumeration: 'null': 0, 'normal-traffic-signal': 1.
                   rcElpsBridgedSignal 1.3.6.1.4.1.8886.6.1.54.1.4.1.4 integer read-only
Bridged Signal from received APS packet. Enumeration: 'null': 0, 'normal-traffic-signal': 1.
           rcElpsNotifications 1.3.6.1.4.1.8886.6.1.54.1.5
               rcElpsDfopTrap 1.3.6.1.4.1.8886.6.1.54.1.5.1
When dFOP happens.
               rcElpsDfopClearTrap 1.3.6.1.4.1.8886.6.1.54.1.5.2
Comes to a new status from dFOP.
               rcElpsSwitchTrap 1.3.6.1.4.1.8886.6.1.54.1.5.3
Linear protection switching happens.
       rcElpsFailureDetGroup 1.3.6.1.4.1.8886.6.1.54.2
           rcElpsFailureDetTable 1.3.6.1.4.1.8886.6.1.54.2.1 no-access
A table of elps link failure detecton configuration .
               rcElpsFailureDetEntry 1.3.6.1.4.1.8886.6.1.54.2.1.1 no-access
Table entry for elps link failure detecton configuration.
                   rcElpsFdLink 1.3.6.1.4.1.8886.6.1.54.2.1.1.1 integer no-access
Linear protection link type, identifies if the link is working entity or protection entity. Enumeration: 'protection': 2, 'working': 1.
                   rcElpsFdType 1.3.6.1.4.1.8886.6.1.54.2.1.1.2 integer read-write
The failure detection type for the link. Enumeration: 'cc': 2, 'both': 3, 'physical-link': 1.
                   rcElpsFdLinkStatus 1.3.6.1.4.1.8886.6.1.54.2.1.1.3 integer read-only
The link status. Enumeration: 'ok': 1, 'sf': 2.
                   rcElpsFdSfType 1.3.6.1.4.1.8886.6.1.54.2.1.1.4 integer read-only
The failure detect types which have triggered SF. Enumeration: 'cc': 3, 'both': 4, 'none': 1, 'physical-link': 2.
                   rcElpsFdMdName 1.3.6.1.4.1.8886.6.1.54.2.1.1.5 octet string read-write
The Maintenance Domain name. Each Maintenance Domain has unique name amongst all those used or available to a service provider or operator. It facilitates easy identification of administrative responsibility for each Maintenance Domain.
                   rcElpsFdMaName 1.3.6.1.4.1.8886.6.1.54.2.1.1.6 octet string read-write
The Short Maintenance Association name. The type/format of this object is determined by the value of the dot1agCfmMaNetNameType object. This name must be unique within a maintenance domain.
                   rcElpsFdLocalMep 1.3.6.1.4.1.8886.6.1.54.2.1.1.7 integer read-write
Local MEPId of working or protection entity, identifying a specific MEP.
                   rcElpsFdRemoteMep 1.3.6.1.4.1.8886.6.1.54.2.1.1.8 integer read-write
Remote MEPId of working or protection entity, identifying a specific MEP.
                   rcElpsMdLevel 1.3.6.1.4.1.8886.6.1.54.2.1.1.9 integer32 read-write
The Maintenance Domain Level.