RADLAN-QOS-SERV: View SNMP OID List / Download MIB

VENDOR: RND


 Home MIB: RADLAN-QOS-SERV
Download as:   
SNMPv2-CONF, IF-MIB, SNMPv2-SMI, Q-BRIDGE-MIB, RADLAN-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 rlQosServ 1.3.6.1.4.1.89.99
The MIB module describes the private MIB for QOS service mode.
       rlQosServTemplateTable 1.3.6.1.4.1.89.99.1 no-access
This table specifies classification template information. Currently this table will contain exactly one entry.
           rlQosServTemplateEntry 1.3.6.1.4.1.89.99.1.1 no-access
The entry of this table describes all classifier fields. The index is sequential integer represent by rlQosServTemplateEntry.
               rlQosServTemplateIndex 1.3.6.1.4.1.89.99.1.1.1 integer no-access
An arbitrary index for the template table.
               rlQosServTemplateDestMac 1.3.6.1.4.1.89.99.1.1.2 truthvalue read-write
Include the destination Mac field as a template classifier.
               rlQosServTemplateDestMacMask 1.3.6.1.4.1.89.99.1.1.3 macaddress read-write
Destination Mac address mask. It may specify any byte (not bit), within the Mac address, for classification, designated by 0.
               rlQosServTemplateSrcMac 1.3.6.1.4.1.89.99.1.1.4 truthvalue read-write
Include the source Mac field as a template classifier.
               rlQosServTemplateSrcMacMask 1.3.6.1.4.1.89.99.1.1.5 macaddress read-write
Source Mac address mask. It may specify any byte (not bit), within the Mac address, for classification, designated by 0.
               rlQosServTemplateVlan 1.3.6.1.4.1.89.99.1.1.6 truthvalue read-write
Include the Vlan field as a template classifier.
               rlQosServTemplateDestIp 1.3.6.1.4.1.89.99.1.1.7 truthvalue read-write
Include the destination Ip field as a template classifier.
               rlQosServTemplateDestIpMask 1.3.6.1.4.1.89.99.1.1.8 ipaddress read-write
Destination Ip address mask. It may specify any byte (not bit), within the Ip address, for classification, designated by 0.
               rlQosServTemplateSrcIp 1.3.6.1.4.1.89.99.1.1.9 truthvalue read-write
Include the source Ip field as a template classifier.
               rlQosServTemplateSrcIpMask 1.3.6.1.4.1.89.99.1.1.10 ipaddress read-write
Source Ip address mask. It may specify any byte (not bit), within the Ip address, for classification, designated by 0.
               rlQosServTemplateIpProtocol 1.3.6.1.4.1.89.99.1.1.11 truthvalue read-write
Include the Ip protocol field as a template classifier.
               rlQosServTemplateSrcPort 1.3.6.1.4.1.89.99.1.1.12 truthvalue read-write
Include the Tcp/Udp source port field as a template classifier.
               rlQosServTemplateDestPort 1.3.6.1.4.1.89.99.1.1.13 truthvalue read-write
Include the Tcp/Udp destination port field as a template classifier.
               rlQosServTemplateTos 1.3.6.1.4.1.89.99.1.1.14 truthvalue read-write
Include the Tos field as a template classifier.
               rlQosServTemplateVpt 1.3.6.1.4.1.89.99.1.1.15 truthvalue read-write
Include the VPT field as a template classifier.
               rlQosServTemplateEtherType 1.3.6.1.4.1.89.99.1.1.16 truthvalue read-write
Include the Ether Type field as a template classifier.
               rlQosServTemplateTcpFlags 1.3.6.1.4.1.89.99.1.1.17 truthvalue read-write
Include the Tcp flags (Control Bits) field as a template classifier.
               rlQosServTemplateIcmpType 1.3.6.1.4.1.89.99.1.1.18 truthvalue read-write
Include the Icmp type field as a template classifier.
               rlQosServTemplateIcmpCode 1.3.6.1.4.1.89.99.1.1.19 truthvalue read-write
Include the Icmp code field as a template classifier.
               rlQosServTemplateIgmpType 1.3.6.1.4.1.89.99.1.1.20 truthvalue read-write
Include the Igmp type field as a template classifier.
       rlQosServFclTable 1.3.6.1.4.1.89.99.2 no-access
This table specifies FCL table information
           rlQosServFclEntry 1.3.6.1.4.1.89.99.2.1 no-access
Each entry in this table describes one Flow Classification List with It's Flow Classification Element. The information includes the FCL index and reference to a FCE index. The indices are the Fcl index represent by rlQosServFclIndex and the Fce index represent by rlQosServFclFceIndex.
               rlQosServFclIndex 1.3.6.1.4.1.89.99.2.1.1 integer no-access
An arbitrary index for the FCL table. Value '0' is invalid.
               rlQosServFclFcePriority 1.3.6.1.4.1.89.99.2.1.2 integer no-access
Priority of the FCE within the FCL.
               rlQosServFclFceIndex 1.3.6.1.4.1.89.99.2.1.3 integer read-only
A reference to the FCE index.
               rlQosServFclStatus 1.3.6.1.4.1.89.99.2.1.4 rowstatus read-only
The status of a table entry. It is used to delete/Add an entry from this table.
       rlQosServFceTable 1.3.6.1.4.1.89.99.3 no-access
This table specifies FCE table information
           rlQosServFceEntry 1.3.6.1.4.1.89.99.3.1 no-access
Each entry in this table describes one Flow Classifier Element. The information includes ACE index and a combination of all the other classifications, as depicted in the selection field. Classifiers are Mac and Ip source and destination addresses, Vlan, Ip protocol, TCP & UDP source and destination ports, Dscp and Ip precedence values. The index is a sequential integer represent by rlQosServFceIndex.
               rlQosServFceIndex 1.3.6.1.4.1.89.99.3.1.1 integer no-access
An arbitrary incremental Index for the Fce table.
               rlQosServFceErrorCode 1.3.6.1.4.1.89.99.3.1.2 integer read-only
Fce error code. Enumeration: 'noError': 1, 'noTemplate': 2.
               rlQosServFceSelection 1.3.6.1.4.1.89.99.3.1.3 bits read-only
Flow Classification Elements selection. Bits: 'vpt': 10, 'macSrcAddr': 1, 'vlan': 2, 'etherType': 11, 'igmpType': 15, 'macDestAddr': 0, 'srcPort': 7, 'dscp': 8, 'ipPrecedence': 9, 'tcpFlags': 12, 'ipSrcAddr': 4, 'ipDestAddr': 3, 'ipProtocol': 5, 'icmpType': 13, 'icmpCode': 14, 'destPort': 6.
               rlQosServFceDestMac 1.3.6.1.4.1.89.99.3.1.4 macaddress read-only
Indicates the destination Mac address to compare with.
               rlQosServFceDestMacMask 1.3.6.1.4.1.89.99.3.1.5 macaddress read-only
Indicates the destination Mac address mask to compare with. It may specify any byte (not bit), designated by 0.
               rlQosServFceSrcMac 1.3.6.1.4.1.89.99.3.1.6 macaddress read-only
Indicates the source Mac address to compare with.
               rlQosServFceSrcMacMask 1.3.6.1.4.1.89.99.3.1.7 macaddress read-only
Indicates the source Mac address mask to compare. It may specify any byte (not bit), designated by 0.
               rlQosServFceVlan 1.3.6.1.4.1.89.99.3.1.8 integer read-only
Indicates the Vlan to compare with.
               rlQosServFceVlanMask 1.3.6.1.4.1.89.99.3.1.9 integer read-only
Indicates 12-bits Vlan bits to compare. It may specify any byte (not bit), designated by 0.
               rlQosServFceDestIp 1.3.6.1.4.1.89.99.3.1.10 ipaddress read-only
Indicates the destination Ip address to compare with.
               rlQosServFceDestIpMask 1.3.6.1.4.1.89.99.3.1.11 ipaddress read-only
Indicates the destination Ip address mask to compare. It may specify any byte (not bit), designated by 0.
               rlQosServFceSrcIp 1.3.6.1.4.1.89.99.3.1.12 ipaddress read-only
Indicates the source Ip address to compare with.
               rlQosServFceSrcIpMask 1.3.6.1.4.1.89.99.3.1.13 ipaddress read-only
Indicates the source Ip address mask to compare. It may specify any byte (not bit), designated by 0.
               rlQosServFceIpProtocol 1.3.6.1.4.1.89.99.3.1.14 integer read-only
Indicates the Ip protocol to compare with.
               rlQosServFceDestPort 1.3.6.1.4.1.89.99.3.1.15 integer read-only
Indicates the TCP/UDP destination port to compare with.
               rlQosServFceDestPortMask 1.3.6.1.4.1.89.99.3.1.16 integer read-only
Indicates 16-bits TCP/UDP destination port bits to compare. It may specify any byte (not bit), designated by 0.
               rlQosServFceSrcPort 1.3.6.1.4.1.89.99.3.1.17 integer read-only
Indicates the TCP/UDP source port to compare with.
               rlQosServFceSrcPortMask 1.3.6.1.4.1.89.99.3.1.18 integer read-only
Indicates 16-bits TCP/UDP source port bits to compare. It may specify any byte (not bit), designated by 0.
               rlQosServFceDscp 1.3.6.1.4.1.89.99.3.1.19 integer read-only
Indicates the Destination Mac address to compare with.
               rlQosServFceIpPrecedence 1.3.6.1.4.1.89.99.3.1.20 integer read-only
Indicates the Ip precedence to compare with.
               rlQosServFceVpt 1.3.6.1.4.1.89.99.3.1.21 integer read-only
Indicates the VPT to compare with.
               rlQosServFceVptMask 1.3.6.1.4.1.89.99.3.1.22 integer read-only
Indicates the VPT mask to compare with. It may specify any bit, designated by 0.
               rlQosServFceEtherType 1.3.6.1.4.1.89.99.3.1.23 integer read-only
Indicate the Ether Type to compare with.
               rlQosServFceTcpFlags 1.3.6.1.4.1.89.99.3.1.24 integer read-only
Indicates the Tcp Flags field to compare with.
               rlQosServFceTcpFlagsMask 1.3.6.1.4.1.89.99.3.1.25 integer read-only
Indicates the Tcp Flags field to compare with.
               rlQosServFceIcmpType 1.3.6.1.4.1.89.99.3.1.26 integer read-only
Indicates the Icmp type to compare with.
               rlQosServFceIcmpCode 1.3.6.1.4.1.89.99.3.1.27 integer read-only
Indicates the Icmp code to compare with.
               rlQosServFceIgmpType 1.3.6.1.4.1.89.99.3.1.28 integer read-only
Indicates the Igmp type to compare with.
               rlQosServFceStatus 1.3.6.1.4.1.89.99.3.1.29 rowstatus read-only
The status of this table entry. It is used to delete/Add an entry from this table.
       rlQosServProfileTable 1.3.6.1.4.1.89.99.4 no-access
This table specifies (service) profile table information
           rlQosServProfileEntry 1.3.6.1.4.1.89.99.4.1 no-access
Each entry in this table describes one service profile element. The information includes: Profile name, type and various numeric parameters associated with the profile's service types. The index is sequential integer represent by rlQosServProfileIndex.
               rlQosServProfileIndex 1.3.6.1.4.1.89.99.4.1.1 integer no-access
An arbitrary index for the profile table.
               rlQosServProfileType 1.3.6.1.4.1.89.99.4.1.2 integer read-only
Profile's type Enumeration: 'aggregate': 2, 'regular': 1.
               rlQosServProfileServiceType 1.3.6.1.4.1.89.99.4.1.3 integer read-only
Profile's service type. Enumeration: 'minDelay': 2, 'minMaxBandwidth': 4, 'committedDelay': 3, 'drop': 10, 'committedBoundBandwidth': 5, 'trustDscp': 8, 'rateLimit': 6, 'bestEffort': 1, 'trustCos': 7, 'dropAndDisablePort': 11, 'trust': 9.
               rlQosServProfileIngressBurstSize 1.3.6.1.4.1.89.99.4.1.4 unsigned32 read-only
Profile's Ingress Burst Size, used only by the 'rate limit' service.
               rlQosServProfileMaxBandwidth 1.3.6.1.4.1.89.99.4.1.5 unsigned32 read-only
Profile's Max Bandwidth, used by the 'min delay', committed delay' 'min max bandwidth' and committed Bound Bandwidth'services. Value 0 is used only as default value, and is invalid otherwise.
               rlQosServProfileMinBandwidth 1.3.6.1.4.1.89.99.4.1.6 unsigned32 read-only
Profile's Min Bandwidth, used only by the 'min max bandwidth' service. Value 0 is used only as default value, and is invalid otherwise.
               rlQosServProfileMaxDelay 1.3.6.1.4.1.89.99.4.1.7 unsigned32 read-only
Profile's Max Delay, used only by the 'committed delay' service. Value 0 is used only as default value, and is invalid otherwise.
               rlQosServProfileStatus 1.3.6.1.4.1.89.99.4.1.8 rowstatus read-only
The status of a table entry. It is used to delete/Add an entry from this table.
       rlQosServServiceTable 1.3.6.1.4.1.89.99.5 no-access
This table specifies service table information.
           rlQosServServiceEntry 1.3.6.1.4.1.89.99.5.1 no-access
Each entry in this table describes one service profile element. The information includes: service's index, priority, pointers to associated profile and Fcl, operational and administrative statuses, ingress and egress interface lists, and two operational parameter values associated with a service type, as defined in the profile table. The index is sequential integer represent by rlQosServServiceIndex.
               rlQosServServiceIndex 1.3.6.1.4.1.89.99.5.1.1 integer no-access
An arbitrary index for the service table.
               rlQosServServicePriority 1.3.6.1.4.1.89.99.5.1.2 unsigned32 read-only
Service's priority.
               rlQosServServiceProfilePointer 1.3.6.1.4.1.89.99.5.1.3 integer read-only
Pointer to attached profile entry.
               rlQosServServiceFclPointer 1.3.6.1.4.1.89.99.5.1.4 integer read-only
Pointer to attached FCL entry.
               rlQosServServiceInIfList 1.3.6.1.4.1.89.99.5.1.5 portlist read-only
Ingress interface list associated with this service entry.
               rlQosServServiceOutIfList 1.3.6.1.4.1.89.99.5.1.6 portlist read-only
Egress interface list associated with this service entry.
               rlQosServServiceScaledOutIfList 1.3.6.1.4.1.89.99.5.1.7 portlist read-only
Egress scaled interface list associated with this service entry.
               rlQosServServiceProfileParamOper 1.3.6.1.4.1.89.99.5.1.8 unsigned32 read-only
If the service type specified in a profile associated with this entry has a parameter, this object instance specifies the parameter's operative value. This value will be different from the value defined in the associated profile only in case of scaling out, otherwise value 0 is used.
               rlQosServServiceStatusOper 1.3.6.1.4.1.89.99.5.1.9 rlqosservservicestatus read-only
Operational value of the service status.
               rlQosServServiceStatusAdmin 1.3.6.1.4.1.89.99.5.1.10 rlqosservservicestatus read-only
Administrative value of the service status.
               rlQosServServiceStatus 1.3.6.1.4.1.89.99.5.1.11 rowstatus read-only
The status of a table entry. It is used to delete/Add an entry from this table.
       rlQosServServicePriorityTable 1.3.6.1.4.1.89.99.6 no-access
This table specifies service priority table information.
           rlQosServServicePriorityEntry 1.3.6.1.4.1.89.99.6.1 no-access
Each entry in this table maps a priority to a service. The information includes: service's priority and the service index in the service table. The index is sequential integer represent by rlQosServServicePriorityIndex.
               rlQosServServicePriorityIndex 1.3.6.1.4.1.89.99.6.1.1 integer no-access
The service priority.
               rlQosServServicePriorityPointer 1.3.6.1.4.1.89.99.6.1.2 integer read-only
The index of the service associated with this priority in the service table.
       rlQosServServiceDefaultMappingTable 1.3.6.1.4.1.89.99.7 no-access
This table specifies service priority table information.
           rlQosServServiceDefaultMappingEntry 1.3.6.1.4.1.89.99.7.1 no-access
Each entry in this table describes one service priority entry. The information includes: service's priority, a pointer to its corresponding index in the service table. The index is sequential integer represent by rlQosServServicePriorityIndex.
               rlQosServServiceDefaultMappingType 1.3.6.1.4.1.89.99.7.1.1 integer no-access
Service type for the default mapping. 'Trust DSCP' service type is absent since no default mapping is possible for it. Enumeration: 'minDelay': 2, 'minMaxBandwidth': 4, 'committedDelay': 3, 'committedBoundBandwidth': 5, 'trustDscp': 7, 'rateLimit': 6, 'bestEffort': 1.
               rlQosServServiceDefaultMappingDscp 1.3.6.1.4.1.89.99.7.1.2 integer read-write
DSCP default mapping value. A value of 64 means no DSCP default mapping is done.
               rlQosServServiceDefaultMappingVpt 1.3.6.1.4.1.89.99.7.1.3 integer read-write
Vpt default mapping value. A value of 9 means no VPT default mapping is done.
       rlQosServScalingErrorTable 1.3.6.1.4.1.89.99.8 no-access
This table specifies scaling error table
           rlQosServScalingErrorEntry 1.3.6.1.4.1.89.99.8.1 no-access
Each entry in this table specifies for each interface its scaling error, if such indeed exists.
               rlQosServScalingErrorIfIndex 1.3.6.1.4.1.89.99.8.1.1 interfaceindex no-access
The interface index.
               rlQosServScalingErrorReason 1.3.6.1.4.1.89.99.8.1.2 integer read-only
Scaling error reason. Enumeration: 'changeSpeed-1000to10': 5, 'changeSpeed-10000to10': 3, 'changeSpeed-10to10000': 9, 'changeSpeed-100to10000': 11, 'changeSpeed-1000to10000': 12, 'changeSpeed-10to1000': 8, 'changeSpeed-10to100': 7, 'changeSpeed-100to1000': 10, 'changeSpeed-100to10': 6, 'changeSpeed-1000to100': 4, 'changeSpeed-10000to1000': 1, 'changeSpeed-10000to100': 2.
       rlQosServFreeSequentialTable 1.3.6.1.4.1.89.99.9 no-access
The table is used to get free indices of tables to create new entries, and next free priorities. The algorithm for free indexes depends on table types: Fcl table - first free index. Fce table - first free index. Service table - first free index. Service priority - last used priority + priority-delta. The priority-delta is used to supply QoS MIB user easy new priority insert entry capabilities. Values of these deltas depend on the MIB implementation. The 'Get and Increment' approach is used in all cases.
           rlQosServFreeSequentialEntry 1.3.6.1.4.1.89.99.9.1 no-access
The entry is used to get free index for particular table.
               rlQosServFreeSequentialId 1.3.6.1.4.1.89.99.9.1.1 integer no-access
Identification of the sequential, for which free indices or priority are retrieved. Enumeration: 'profile': 3, 'priorityService': 5, 'fcl': 1, 'fce': 2, 'service': 4.
               rlQosServFreeSequentialValue 1.3.6.1.4.1.89.99.9.1.2 integer read-only
The free index for the table or service priority. Returned '0' means no free entries/priority.
       rlQosServNameToIndexTable 1.3.6.1.4.1.89.99.10 no-access
The table is used to get specific table(s) indices from the name.
             rlQosServNameToIndexEntry 1.3.6.1.4.1.89.99.10.1 no-access
The entry is used to get index form particular name and table type.
                 rlQosServNameToIndexTableId 1.3.6.1.4.1.89.99.10.1.1 rlqosservnamedtableid no-access
Identification of the table, for which the index is retrieved.
                 rlQosServNameToIndexName 1.3.6.1.4.1.89.99.10.1.2 displaystring no-access
Name of the table's entry
                 rlQosServNameToIndexValue 1.3.6.1.4.1.89.99.10.1.3 integer read-only
The index of the table. Value '0' is invalid.
                 rlQosServNameToIndexStatus 1.3.6.1.4.1.89.99.10.1.4 rowstatus read-only
The status of a table entry. It is used to delete/Add an entry from this table.
       rlQosServIndexToNameTable 1.3.6.1.4.1.89.99.11 no-access
The table is used to get specific table(s) name from indices. It is a read-write table for internal (CDB) purpose only and is not to set by outside users.
             rlQosServIndexToNameEntry 1.3.6.1.4.1.89.99.11.1 no-access
The entry is used to get name form particular index and table type.
                 rlQosServIndexToNameTableId 1.3.6.1.4.1.89.99.11.1.1 rlqosservnamedtableid no-access
Identification of the table, for which the name is retrieved.
                 rlQosServIndexToNameIndex 1.3.6.1.4.1.89.99.11.1.2 integer no-access
The index of the table. Value '0' is invalid.
                 rlQosServIndexToNameValue 1.3.6.1.4.1.89.99.11.1.3 displaystring read-write
Name of the table's entry
       rlQosServMibVersion 1.3.6.1.4.1.89.99.12 integer read-only
MIB's version, the current version is 1. 1 - original version. 2-
       rlQosServMibAction 1.3.6.1.4.1.89.99.13 integer read-write
Actions to be performed by QoS service mode MIB. Enumeration: 'importPolicy': 2, 'none': 1, 'noImportPolicy': 3, 'flatServicePriorities': 4.