RADLAN-PIM-BSR-MIB: View SNMP OID List / Download MIB

VENDOR: RND


 Home MIB: RADLAN-PIM-BSR-MIB
Download as:   

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 rlPimBsrCandidateRPTable 1.3.6.1.4.1.89.220 no-access
The (conceptual) table listing the IP multicast group prefixes for which the local router is to advertise itself as a Candidate-RP.
         rlPimBsrCandidateRPEntry 1.3.6.1.4.1.89.220.1 no-access
An entry (conceptual row) in the rlPimBsrCandidateRPTable.
             rlPimBsrCandidateRPAddressType 1.3.6.1.4.1.89.220.1.1 inetaddresstype no-access
The Inet address type of the Candidate-RP.
             rlPimBsrCandidateRPAddress 1.3.6.1.4.1.89.220.1.2 inetaddress no-access
The (unicast) address that will be advertised as a Candidate-RP. The InetAddressType is given by the rlPimBsrCandidateRPAddressType object. If this is not an address on the local router, DC-PIM will not advertise it as an C-RP address.
             rlPimBsrCandidateRPGroupPrefixList 1.3.6.1.4.1.89.220.1.3 displaystring read-only
Identifies a standard access list containing the set of IP multicast group prefixes for which the local router will advertise itself as a Candidate-RP with the given RP address. If there is any rule in the list with aallStdAccessListIncluded set to 'false', DC-PIM does not advertise this RP address as a Candidate-RP. Otherwise DC-PIM advertises the RP address as a Candidate-RP for every IP multicast group prefix corresponding to a rule in the access list with row status 'active' and admin status 'up'. rlPimBsrCandidateRPGroupPrefixList defaults to an empty string, which indicates that no access list has yet been specified. rlPimBsrCandidateRPStatus can only be set to 'active' if a non-empty string has been specified for rlPimBsrCandidateRPGroupPrefixList.
             rlPimBsrCandidateRPBidir 1.3.6.1.4.1.89.220.1.5 truthvalue read-only
If this object is set to TRUE, this group range is advertised with this RP as a BIDIR-PIM group range. If it is set to FALSE, it is advertised as a PIM-SM group range. DC-PIM only supports the value FALSE for this object.
             rlPimBsrCandidateRPAdvTimer 1.3.6.1.4.1.89.220.1.6 timeticks read-only
The time remaining before the local router next sends a Candidate-RP-Advertisement to the elected BSR. This will be zero if the C-RP is shutting down or any of the following conditions are true: - the entity is not active - the row is inactive - the group prefix list is invalid - the configured C-RP address is not local.
             rlPimBsrCandidateRPPriority 1.3.6.1.4.1.89.220.1.7 unsigned32 read-only
The priority for this Candidate RP advertised in Candidate-RP-Advertisements. Numerically higher values for this object indicate lower priorities, with the value zero denoting the highest priority.
             rlPimBsrCandidateRPAdvInterval 1.3.6.1.4.1.89.220.1.8 unsigned32 read-only
A Candidate RP generates Candidate-RP-Advertisements periodically. This object represents the time interval in seconds between two consecutive advertisements.
             rlPimBsrCandidateRPHoldtime 1.3.6.1.4.1.89.220.1.9 unsigned32 read-only
Holdtime for this Candidate RP. The amount of time (in seconds) this Candidate-RP entry is valid.
             rlPimBsrCandidateRPStatus 1.3.6.1.4.1.89.220.1.10 rowstatus read-only
The status of this row, by which new entries may be created, or old entries deleted from this table. All writable objects in this entry can be modified when the status of this entry is active(1).