RADLAN-IpRouter: View SNMP OID List / Download MIB

VENDOR: RND


 Home MIB: RADLAN-IpRouter
Download as:   
SNMPv2-CONF, OSPF-MIB, SNMPv2-SMI, RADLAN-IP, SNMPv2-TC, RFC1389-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
     rsRip2IfConfTable 1.3.6.1.4.1.89.26.3.1 no-access
This table is extension of rip2IfConfTable (RFC 1389 ,RIP 2)
         rsRip2IfConfEntry 1.3.6.1.4.1.89.26.3.1.1 no-access
The row definition for this table.
             rsRip2IfConfAddress 1.3.6.1.4.1.89.26.3.1.1.1 ipaddress read-only
The IP Address of this system on the indicated subnet.
             rsRip2IfConfVirtualDis 1.3.6.1.4.1.89.26.3.1.1.2 integer read-write
This variable defines the virtual number of hops assigned to the interface specified by rsIfIpAddrIndex. This enables fine-tuning of the RIP routing algorithm.
             rsRip2IfConfAutoSend 1.3.6.1.4.1.89.26.3.1.1.3 integer read-write
This variable controls RIP automatic send behavior. If enabled and no routers were heard on the interface, RIP will only send default route with high metric. Otherwise RIP will send updates according to configuration. Enumeration: 'enable': 1, 'disable': 2.
             rlRip2IfConfKeyChain 1.3.6.1.4.1.89.26.3.1.1.4 displaystring read-write
Name of the key-chain which rip2 interface uses for md5 authentication
     rlRip2AutoInterfaceCreation 1.3.6.1.4.1.89.26.3.2 integer read-only
This variable controls RIP automatic creation and activation of interfaces. If value is enable - IP interface creation results in creation and activation of rip Interface. If value is disable Rip interface is created but not activated. The option is a platform parameter. Enumeration: 'enable': 1, 'disable': 2.
     rlRip2MibVersion 1.3.6.1.4.1.89.26.3.3 integer read-only
MIB's version, the current version is 1.
     ipRedundAdminStatus 1.3.6.1.4.1.89.26.6.1 integer read-write
This parameter controls the IP Redundancy in the device. In case the parameter is Enable and the other router becomes inoperational, all the traffic is handled by this element. Enumeration: 'enable': 1, 'disable': 2.
     ipRedundOperStatus 1.3.6.1.4.1.89.26.6.2 integer read-only
obsolete Enumeration: 'active': 1, 'inactive': 2.
     ipRedundRoutersTable 1.3.6.1.4.1.89.26.6.3 no-access
List of IP addresses backed up by this router.
         ipRedundRoutersEntry 1.3.6.1.4.1.89.26.6.3.1 no-access
The row definition for this table.
             ipRedundRoutersIfAddr 1.3.6.1.4.1.89.26.6.3.1.1 ipaddress read-only
The Ip address of the IP interface on which the redundancy feature is operational.
             ipRedundRoutersMainRouterAddr 1.3.6.1.4.1.89.26.6.3.1.2 ipaddress read-only
The Ip address of the polled main router.
             ipRedundRoutersOperStatus 1.3.6.1.4.1.89.26.6.3.1.3 integer read-only
If active, the main router is considered inoperational and the IP interface operates as its backup. Enumeration: 'active': 1, 'inactive': 2.
             ipRedundRoutersPollInterval 1.3.6.1.4.1.89.26.6.3.1.4 integer read-write
Polling interval for this router (in seconds). If 0 the router is not polled.
             ipRedundRoutersTimeout 1.3.6.1.4.1.89.26.6.3.1.5 integer read-write
Interval in seconds during which the backed-up router must signal. If it does not signal, it is considered inoperational and the IP interface starts operating as backup.
             ipRedundRoutersStatus 1.3.6.1.4.1.89.26.6.3.1.6 integer read-write
Entry status Enumeration: 'createAndWait': 5, 'notInService': 2, 'notReady': 3, 'createAndGo': 4, 'active': 1, 'destroy': 6.
     ipLeakStaticToRip 1.3.6.1.4.1.89.26.7.1 integer read-write
This parameter controls leaking (redistribution) of static routes to RIP. When enabled, all routes inserted to the IP routing table via SNMP are advertised into RIP. Enumeration: 'enable': 1, 'disable': 2.
     ipLeakStaticToOspf 1.3.6.1.4.1.89.26.7.2 integer read-write
This parameter controls leaking (redistribution) of static routes into OSPF. When enabled, all routes inserted to the IP routing table via SNMP are advertised into OSPF as external routes. Enumeration: 'enable': 1, 'disable': 2.
     ipLeakOspfToRip 1.3.6.1.4.1.89.26.7.3 integer read-write
This parameter controls leaking (redistribution) of routes from OSPF to RIP. If enabled, all routes learned via OSPF are advertised into RIP. Enumeration: 'enable': 1, 'disable': 2.
     ipLeakRipToOspf 1.3.6.1.4.1.89.26.7.4 integer read-write
This parameter controls leaking (redistribution) of routes from RIP to OSPF. If enabled, all routes learned via RIP are advertised into OSPF as external routes. Enumeration: 'enable': 1, 'disable': 2.
     ipLeakExtDirectToOspf 1.3.6.1.4.1.89.26.7.5 integer read-write
This parameter controls leaking (redistribution) into OSPF of direct routes external to OSPF, i.e. routes to local network corresponding to IP interfaces on which OSPF is disabled. When enabled, all such direct routes are advertised into OSPF as external routes. Enumeration: 'enable': 1, 'disable': 2.
     rsIpRipFilterGlbTable 1.3.6.1.4.1.89.26.8.1 no-access
The table of RIP global filters per IP router.
         rsIpRipFilterGlbEntry 1.3.6.1.4.1.89.26.8.1.1 no-access
An entry in the RIP global filter table
             rsIpRipFilterGlbType 1.3.6.1.4.1.89.26.8.1.1.1 integer read-only
Type of filter - input/output Enumeration: 'input': 1, 'output': 2.
             rsIpRipFilterGlbNumber 1.3.6.1.4.1.89.26.8.1.1.2 integer read-only
Number of RIP filter.
             rsIpRipFilterGlbStatus 1.3.6.1.4.1.89.26.8.1.1.3 integer read-write
The validity of this entry. Setting this value to invalid deletes the entry, and the entry may be actualy removed from the table. Enumeration: 'underCreation': 3, 'valid': 1, 'invalid': 2.
             rsIpRipFilterGlbIpAddr 1.3.6.1.4.1.89.26.8.1.1.4 ipaddress read-write
network prefix IP address, as in the forwarding table.
             rsIpRipFilterGlbNetworkMaskBits 1.3.6.1.4.1.89.26.8.1.1.5 integer read-write
the number of bits in the IP Network mask, called network-prefix-length in Router Requirements terminology. for example: the value 16 means mask 255.255.0.0
             rsIpRipFilterGlbMatchBits 1.3.6.1.4.1.89.26.8.1.1.6 integer read-write
the number of bits to match in the Network IP address. A value smaller than 32 defines a wildcard. for example: the value 8 means all routes whose leftmost 8 bits are equal to those of the network IP address. If this variable has a value other than 32, than rsIpRipFilterGlbNetworkMaskBits must be 0 and is ignored.
             rsIpRipFilterGlbAction 1.3.6.1.4.1.89.26.8.1.1.7 integer read-write
Filter action - permit/deny for this network Enumeration: 'deny': 1, 'permit': 2.
     rsIpRipFilterLclTable 1.3.6.1.4.1.89.26.8.2 no-access
Table of input/output RIP filters used per IP Interface.
         rsIpRipFilterLclEntry 1.3.6.1.4.1.89.26.8.2.1 no-access
An entry in the Intf RIP filter table
             rsIpRipFilterLclIpIntf 1.3.6.1.4.1.89.26.8.2.1.1 ipaddress read-only
The IP address identifying the RIP interface for this filter. This value corresponds to rsIpAdEntAddr.
             rsIpRipFilterLclType 1.3.6.1.4.1.89.26.8.2.1.2 integer read-only
Type of filter - input/output Enumeration: 'input': 1, 'output': 2.
             rsIpRipFilterLclNumber 1.3.6.1.4.1.89.26.8.2.1.3 integer read-only
Number of RIP filter for this Interface
             rsIpRipFilterLclStatus 1.3.6.1.4.1.89.26.8.2.1.4 integer read-write
The validity of this entry. Setting this value to invalid deletes the entry, and the entry may be actualy removed from the table. Enumeration: 'underCreation': 3, 'valid': 1, 'invalid': 2.
             rsIpRipFilterLclIpAddr 1.3.6.1.4.1.89.26.8.2.1.5 ipaddress read-write
network prefix IP address, as in the forwarding table.
             rsIpRipFilterLclNetworkMaskBits 1.3.6.1.4.1.89.26.8.2.1.6 integer read-write
the number of bits in the IP Network mask, called network-prefix-length in Router Requirements terminology. for example: the value 16 means mask 255.255.0.0
             rsIpRipFilterLclMatchBits 1.3.6.1.4.1.89.26.8.2.1.7 integer read-write
the number of bits to match in the Network IP address. A value smaller than 32 defines a wildcard. for example: the value 8 means all routes whose leftmost 8 bits are equal to those of the network IP address. If this variable has a value other than 32, than rsIpRipFilterLclNetworkMaskBits must be 0 and is ignored.
             rsIpRipFilterLclAction 1.3.6.1.4.1.89.26.8.2.1.8 integer read-write
Filter action - permit/deny Enumeration: 'deny': 1, 'permit': 2.
       rlIpRoutingProtPreferenceDirect 1.3.6.1.4.1.89.26.13.1 integer read-write
The Preference given to routes whose origin is Local IP (i.e. IP interface in IpAddrTable) It is proposed that the value will be higher than dynamic routing protocols. The change of its value may lead to unexpected results, such as routing loops
       rlIpRoutingProtPreferenceStatic 1.3.6.1.4.1.89.26.13.2 integer read-write
The Preference given to routes whose origin is Men configured by Net managment tools, i.e. Command line or SNMP configured.
       rlIpRoutingProtPreferenceOspfInter 1.3.6.1.4.1.89.26.13.3 integer read-write
The Preference given to routes whose origin is internal ospf Links. Relate to routes which are based on OSPF Link State Advertisements of type 1-4
       rlIpRoutingProtPreferenceOspfExt 1.3.6.1.4.1.89.26.13.4 integer read-write
The Preference given to routes whose origin is external to OSPF i.e. routes imported by as OSPF AS Border router. Relate to routes which are based on OSPF Link State Advertisements of types 5 and 7
       rlIpRoutingProtPreferenceOspfReject 1.3.6.1.4.1.89.26.13.5 integer read-write
The Preference given to routes whose origin is OSPF and Are inserted to cover gaps in net range
       rlIpRoutingProtPreferenceRipNormal 1.3.6.1.4.1.89.26.13.6 integer read-write
The Preference given to routes whose origin is RIP routing domain
       rlIpRoutingProtPreferenceRipAggregate 1.3.6.1.4.1.89.26.13.7 integer read-write
The Preference given to routes whose origin is aggregation As a method of rip1 to handle the CIDR schema. The idea is that ripv1 aggregates route which fall into certion class of IP. This route is a discard route in effect, and is referenced, at forwarding route look up, if there is no beter match. (which means the route is not available)
       rlIpRoutingProtPreferenceBgp 1.3.6.1.4.1.89.26.13.8 integer read-write
The Preference given to routes whose origin is BGP ROUTERS (EBGP or IBGP)
       rlOspfMibVersion 1.3.6.1.4.1.89.26.14.1 integer read-only
MIB's version, the current version is 1.
       rlOspfAutoInterfaceCreation 1.3.6.1.4.1.89.26.14.2 integer read-only
This variable controls OSPF automatic creation and activation of interfaces. If value is enable - IP interface creation results in creation and activation of OSPF Interface. If value is disable OSPF interface is created but not activated. The option is a platform parameter. Enumeration: 'enable': 1, 'disable': 2.
       rlOspfIfExtTable 1.3.6.1.4.1.89.26.14.3 no-access
The OSPF Interface Table describes the interfaces from the viewpoint of OSPF.
           rlOspfIfExtEntry 1.3.6.1.4.1.89.26.14.3.1 no-access
The OSPF interface table extension for md5 authentication
               rlOspfifKeyChain 1.3.6.1.4.1.89.26.14.3.1.1 displaystring read-write
Name of the key-chain which ospf interface uses for md5 authentication
       rlOspfRtrLnkTable 1.3.6.1.4.1.89.26.14.4 no-access
Router Link State Advertisement.
           rlOspfRtrLnkEntry 1.3.6.1.4.1.89.26.14.4.1 no-access
A single entry from Router LSA.
               rlOspfRtrLnkAreaId 1.3.6.1.4.1.89.26.14.4.1.1 areaid read-only
The 32 bit identifier of the Area from which the LSA was received.
               rlOspfRtrLnkLsid 1.3.6.1.4.1.89.26.14.4.1.2 ipaddress read-only
The Link State ID is an LS Type Specific field containing either a Router ID or an IP Address; it identifies the piece of the routing domain that is being described by the advertisement.
               rlOspfRtrLnkRouterId 1.3.6.1.4.1.89.26.14.4.1.3 routerid read-only
The 32 bit number that uniquely identifies the originating router in the Autonomous System.
               rlOspfRtrLnkIdx 1.3.6.1.4.1.89.26.14.4.1.4 unsigned32 read-only
The index is a unsigned 32-bit integer. It is used as sequence number of entry in the LSA and relevant only for Router or Network LSA which can contain unlimited number of entries.
               rlOspfRtrLnkSequence 1.3.6.1.4.1.89.26.14.4.1.5 integer32 read-only
The sequence number field is a signed 32-bit integer. It is used to detect old and duplicate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number the more recent the advertisement.
               rlOspfRtrLnkAge 1.3.6.1.4.1.89.26.14.4.1.6 integer32 read-only
This field is the age of the link state advertisement in seconds.
               rlOspfRtrLnkChecksum 1.3.6.1.4.1.89.26.14.4.1.7 integer32 read-only
This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connectionless datagrams; it is commonly referred to as the Fletcher checksum.
               rlOspfRtrLnkLength 1.3.6.1.4.1.89.26.14.4.1.8 unsigned32 read-only
The lenth in bytes of the LSA. This includes the 20 byte LSA header.
               rlOspfRtrLnkBitV 1.3.6.1.4.1.89.26.14.4.1.9 integer read-only
When set, the router is an endpoint of one or more fully adjacent virtual links having the described area as Transit area (V is for virtual link endpoint). Enumeration: 'on': 2, 'off': 1.
               rlOspfRtrLnkBitE 1.3.6.1.4.1.89.26.14.4.1.10 integer read-only
When set, the router is an AS boundary router (E is for external). Enumeration: 'on': 2, 'off': 1.
               rlOspfRtrLnkBitB 1.3.6.1.4.1.89.26.14.4.1.11 integer read-only
When set, the router is an area border router (B is for border). Enumeration: 'on': 2, 'off': 1.
               rlOspfRtrLnkLinks 1.3.6.1.4.1.89.26.14.4.1.12 unsigned32 read-only
The number of router links described in this LSA. This must be the total collection of router links (i.e., interfaces) to the area.
               rlOspfRtrLnkLinkID 1.3.6.1.4.1.89.26.14.4.1.13 ipaddress read-only
Identifies the object that this router link connects to. Value depends on the link's Type.
               rlOspfRtrLnkLinkData 1.3.6.1.4.1.89.26.14.4.1.14 ipaddress read-only
Value depends on the link's Type field.
               rlOspfRtrLnkType 1.3.6.1.4.1.89.26.14.4.1.15 integer read-only
A quick description of the router link. Enumeration: 'transitNetwork': 2, 'pointToPoint': 1, 'virtualLink': 4, 'stubNetwork': 3.
               rlOspfRtrLnkMetric 1.3.6.1.4.1.89.26.14.4.1.16 unsigned32 read-only
The cost of using this router link.
       rlOspfNetLnkTable 1.3.6.1.4.1.89.26.14.5 no-access
Network Link State Advertisement.
           rlOspfNetLnkEntry 1.3.6.1.4.1.89.26.14.5.1 no-access
A single entry from Network LSA.
               rlOspfNetLnkAreaId 1.3.6.1.4.1.89.26.14.5.1.1 areaid read-only
The 32 bit identifier of the Area from which the LSA was received.
               rlOspfNetLnkLsid 1.3.6.1.4.1.89.26.14.5.1.2 ipaddress read-only
The Link State ID is an LS Type Specific field containing either a Router ID or an IP Address; it identifies the piece of the routing domain that is being described by the advertisement.
               rlOspfNetLnkRouterId 1.3.6.1.4.1.89.26.14.5.1.3 routerid read-only
The 32 bit number that uniquely identifies the originating router in the Autonomous System.
               rlOspfNetLnkIdx 1.3.6.1.4.1.89.26.14.5.1.4 unsigned32 read-only
The index is a unsigned 32-bit integer. It is used as sequence number of entry in the LSA and relevant only for Router or Network LSA which can contain unlimited number of entries.
               rlOspfNetLnkSequence 1.3.6.1.4.1.89.26.14.5.1.5 integer32 read-only
The sequence number field is a signed 32-bit integer. It is used to detect old and duplicate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number the more recent the advertisement.
               rlOspfNetLnkAge 1.3.6.1.4.1.89.26.14.5.1.6 integer32 read-only
This field is the age of the link state advertisement in seconds.
               rlOspfNetLnkChecksum 1.3.6.1.4.1.89.26.14.5.1.7 integer32 read-only
This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connectionless datagrams; it is commonly referred to as the Fletcher checksum.
               rlOspfNetLnkLength 1.3.6.1.4.1.89.26.14.5.1.8 unsigned32 read-only
The lenth in bytes of the LSA. This includes the 20 byte LSA header.
               rlOspfNetLnkMask 1.3.6.1.4.1.89.26.14.5.1.9 ipaddress read-only
The IP address mask for the network.
               rlOspfNetLnkAttRouter 1.3.6.1.4.1.89.26.14.5.1.10 ipaddress read-only
The Router IDs of each of the routers attached to the network.
       rlOspfSumLnkTable 1.3.6.1.4.1.89.26.14.6 no-access
Summary Link State Advertisement for network (Type 3).
           rlOspfSumLnkEntry 1.3.6.1.4.1.89.26.14.6.1 no-access
A single entry from Summary LSA.
               rlOspfSumLnkAreaId 1.3.6.1.4.1.89.26.14.6.1.1 areaid read-only
The 32 bit identifier of the Area from which the LSA was received.
               rlOspfSumLnkLsid 1.3.6.1.4.1.89.26.14.6.1.2 ipaddress read-only
The Link State ID is an LS Type Specific field containing either a Router ID or an IP Address; it identifies the piece of the routing domain that is being described by the advertisement.
               rlOspfSumLnkRouterId 1.3.6.1.4.1.89.26.14.6.1.3 routerid read-only
The 32 bit number that uniquely identifies the originating router in the Autonomous System.
               rlOspfSumLnkSequence 1.3.6.1.4.1.89.26.14.6.1.4 integer32 read-only
The sequence number field is a signed 32-bit integer. It is used to detect old and duplicate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number the more recent the advertisement.
               rlOspfSumLnkAge 1.3.6.1.4.1.89.26.14.6.1.5 integer32 read-only
This field is the age of the link state advertisement in seconds.
               rlOspfSumLnkChecksum 1.3.6.1.4.1.89.26.14.6.1.6 integer32 read-only
This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connectionless datagrams; it is commonly referred to as the Fletcher checksum.
               rlOspfSumLnkLength 1.3.6.1.4.1.89.26.14.6.1.7 unsigned32 read-only
The lenth in bytes of the LSA. This includes the 20 byte LSA header.
               rlOspfSumLnkMask 1.3.6.1.4.1.89.26.14.6.1.8 ipaddress read-only
Value depends on the link's Type field.
               rlOspfSumLnkMetric 1.3.6.1.4.1.89.26.14.6.1.9 unsigned32 read-only
The cost of using this router link.
       rlOspfAsbLnkTable 1.3.6.1.4.1.89.26.14.7 no-access
Summary Link State Advertisement for ASBR (Type 4).
           rlOspfAsbLnkEntry 1.3.6.1.4.1.89.26.14.7.1 no-access
A single entry from Summary LSA.
               rlOspfAsbLnkAreaId 1.3.6.1.4.1.89.26.14.7.1.1 areaid read-only
The 32 bit identifier of the Area from which the LSA was received.
               rlOspfAsbLnkLsid 1.3.6.1.4.1.89.26.14.7.1.2 ipaddress read-only
The Link State ID is an LS Type Specific field containing either a Router ID or an IP Address; it identifies the piece of the routing domain that is being described by the advertisement.
               rlOspfAsbLnkRouterId 1.3.6.1.4.1.89.26.14.7.1.3 routerid read-only
The 32 bit number that uniquely identifies the originating router in the Autonomous System.
               rlOspfAsbLnkSequence 1.3.6.1.4.1.89.26.14.7.1.4 integer32 read-only
The sequence number field is a signed 32-bit integer. It is used to detect old and duplicate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number the more recent the advertisement.
               rlOspfAsbLnkAge 1.3.6.1.4.1.89.26.14.7.1.5 integer32 read-only
This field is the age of the link state advertisement in seconds.
               rlOspfAsbLnkChecksum 1.3.6.1.4.1.89.26.14.7.1.6 integer32 read-only
This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connectionless datagrams; it is commonly referred to as the Fletcher checksum.
               rlOspfAsbLnkLength 1.3.6.1.4.1.89.26.14.7.1.7 unsigned32 read-only
The lenth in bytes of the LSA. This includes the 20 byte LSA header.
               rlOspfAsbLnkMetric 1.3.6.1.4.1.89.26.14.7.1.8 unsigned32 read-only
The cost of using this router link.
       rlOspfAseLnkTable 1.3.6.1.4.1.89.26.14.8 no-access
External Link State Advertisement.
           rlOspfAseLnkEntry 1.3.6.1.4.1.89.26.14.8.1 no-access
A single entry from External LSA.
               rlOspfAseLnkLsid 1.3.6.1.4.1.89.26.14.8.1.1 ipaddress read-only
The Link State ID is an LS Type Specific field containing either a Router ID or an IP Address; it identifies the piece of the routing domain that is being described by the advertisement.
               rlOspfAseLnkRouterId 1.3.6.1.4.1.89.26.14.8.1.2 routerid read-only
The 32 bit number that uniquely identifies the originating router in the Autonomous System.
               rlOspfAseLnkSequence 1.3.6.1.4.1.89.26.14.8.1.3 integer32 read-only
The sequence number field is a signed 32-bit integer. It is used to detect old and duplicate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number the more recent the advertisement.
               rlOspfAseLnkAge 1.3.6.1.4.1.89.26.14.8.1.4 integer32 read-only
This field is the age of the link state advertisement in seconds.
               rlOspfAseLnkChecksum 1.3.6.1.4.1.89.26.14.8.1.5 integer32 read-only
This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connectionless datagrams; it is commonly referred to as the Fletcher checksum.
               rlOspfAseLnkLength 1.3.6.1.4.1.89.26.14.8.1.6 unsigned32 read-only
The lenth in bytes of the LSA. This includes the 20 byte LSA header.
               rlOspfAseLnkMask 1.3.6.1.4.1.89.26.14.8.1.7 ipaddress read-only
Value depends on the link's Type field.
               rlOspfAseLnkFrwAddress 1.3.6.1.4.1.89.26.14.8.1.8 ipaddress read-only
Data traffic for the advertised destination will be forwarded to this address. If the Forwarding address is set to 0.0.0.0, data traffic will be forwarded instead to the LSA's originator (i.e., the responsible AS boundary router).
               rlOspfAseLnkBitE 1.3.6.1.4.1.89.26.14.8.1.9 integer read-only
The type of external metric. If bit E is set, the metric specified is a Type 2 external metric. Enumeration: 'on': 2, 'off': 1.
               rlOspfAseLnkMetric 1.3.6.1.4.1.89.26.14.8.1.10 unsigned32 read-only
The cost of this route.
               rlOspfAseLnkTag 1.3.6.1.4.1.89.26.14.8.1.11 unsigned32 read-only
A 32-bit field attached to each external route.
       rlospfVirtIfExtTable 1.3.6.1.4.1.89.26.14.9 no-access
The Virtual Interface Table describes the virtual links that the OSPF Process is configured to carry on.
           rlospfVirtIfExtEntry 1.3.6.1.4.1.89.26.14.9.1 no-access
The OSPF virtual interface table extension for md5 authentication
               rlospfVirtifKeyChain 1.3.6.1.4.1.89.26.14.9.1.1 displaystring read-write
Name of the key-chain which ospf virtual interface uses for md5 authentication
 rlIpRouter 1.3.6.1.4.1.89.26.18
The private MIB module definition for router MIB.