RADIUS-STAT-MIB: View SNMP OID List / Download MIB

VENDOR: INTERNET-STANDARD


 Home MIB: RADIUS-STAT-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC, SNMP-FRAMEWORK-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 radiusMIB 1.3.6.1.2.1.67
The OID assigned to RADIUS MIB work by the IANA.
       radiusStatistics 1.3.6.1.2.1.67.3
           radiusStatMIB 1.3.6.1.2.1.67.3.1
The MIB module for entities implementing the statistics side of the Remote Access Dialin User Service (RADIUS) authentication protocol.
               radiusStatIdent 1.3.6.1.2.1.67.3.1.1 snmpadminstring read-only
The implementation identification string for the RADIUS statistics server software in use on the system
               radiusStatUpTime 1.3.6.1.2.1.67.3.1.2 timeticks read-only
Time (in hundredths of a second) since the statistics was started.
               radiusStatConfigReset 1.3.6.1.2.1.67.3.1.3 integer read-write
Status/action object to reinitialize any persistent server state. When set to reset(2), any persistent server state (such as a process) is reinitialized as if the server had just been started. This value will never be returned by a read operation. When read, one of the following values will be returned: other(1) - server in some unknown state; initializing(3) - server (re)initializing; running(4) - server currently running. Enumeration: 'reset': 2, 'running': 4, 'other': 1, 'initializing': 3.
               radiusStatTotalLines 1.3.6.1.2.1.67.3.1.4 counter32 read-only
The number of dialup lines registered by the statistics module
               radiusStatTotalLinesInUse 1.3.6.1.2.1.67.3.1.5 counter32 read-only
The number dial-up lines currently in use
               radiusStatTotalLinesIdle 1.3.6.1.2.1.67.3.1.6 counter32 read-only
The number dial-up lines currently idle
               radiusStatNASTable 1.3.6.1.2.1.67.3.1.7 no-access
The (conceptual) table listing the available Network Access Servers
                   radiusStatNASEntry 1.3.6.1.2.1.67.3.1.7.1 no-access
An entry (conceptual row) representing a Network Access Server
                       nASIndex 1.3.6.1.2.1.67.3.1.7.1.1 integer32 no-access
A number uniquely identifying each NAS
                       nASAddress 1.3.6.1.2.1.67.3.1.7.1.2 ipaddress read-only
The NAS-IP-Address
                       nASID 1.3.6.1.2.1.67.3.1.7.1.3 snmpadminstring read-only
The NAS-Identifier
                       nASLines 1.3.6.1.2.1.67.3.1.7.1.4 counter32 read-only
The number of lines served by the NAS
                       nASLinesInUse 1.3.6.1.2.1.67.3.1.7.1.5 counter32 read-only
The number of lines currently in use on this NAS
                       nASLinesIdle 1.3.6.1.2.1.67.3.1.7.1.6 counter32 read-only
The number of lines currently idle on this NAS
               radiusStatNASPortTable 1.3.6.1.2.1.67.3.1.8 no-access
The (conceptual) table listing the available ports
                   radiusStatNASPortEntry 1.3.6.1.2.1.67.3.1.8.1 no-access
An entry (conceptual row) representing a port
                       radiusStatPortIndex 1.3.6.1.2.1.67.3.1.8.1.1 integer32 read-only
A number uniquely identifying each port
                       radiusStatNASIndex 1.3.6.1.2.1.67.3.1.8.1.2 integer32 read-only
A number uniquely identifying each port
                       radiusStatPortID 1.3.6.1.2.1.67.3.1.8.1.3 integer32 read-only
The Port-Identifier
                       radiusStatPortFramedAddress 1.3.6.1.2.1.67.3.1.8.1.4 ipaddress read-only
The Port-Identifier
                       radiusStatPortTotalLogins 1.3.6.1.2.1.67.3.1.8.1.5 counter32 read-only
The number of logins registered so far
                       radiusStatPortStatus 1.3.6.1.2.1.67.3.1.8.1.6 integer read-only
The status of the port Enumeration: 'idle': 1, 'inUse': 2.
                       radiusStatPortStatusDate 1.3.6.1.2.1.67.3.1.8.1.7 snmpadminstring read-only
Time of the last change in port status
                       radiusStatPortUpTime 1.3.6.1.2.1.67.3.1.8.1.8 timeticks read-only
Time in thousandths of a second since the port changed its status
                       radiusStatPortLastLoginName 1.3.6.1.2.1.67.3.1.8.1.9 snmpadminstring read-only
The username of the last user logged in on that port
                       radiusStatPortLastLoginDate 1.3.6.1.2.1.67.3.1.8.1.10 snmpadminstring read-only
Time of the last login
                       radiusStatPortLastLogoutDate 1.3.6.1.2.1.67.3.1.8.1.11 snmpadminstring read-only
Time of the last logout
                       radiusStatPortIdleTotalTime 1.3.6.1.2.1.67.3.1.8.1.12 timeticks read-only
Total time the port was idle
                       radiusStatPortIdleMaxTime 1.3.6.1.2.1.67.3.1.8.1.13 timeticks read-only
Maximum time the port was idle
                       radiusStatPortIdleMaxDate 1.3.6.1.2.1.67.3.1.8.1.14 snmpadminstring read-only
Date when the maximum idle time was registered
                       radiusStatPortInUseTotalTime 1.3.6.1.2.1.67.3.1.8.1.15 timeticks read-only
Total time the port was in use
                       radiusStatPortInUseMaxTime 1.3.6.1.2.1.67.3.1.8.1.16 timeticks read-only
Maximum time the port was in use
                       radiusStatPortInUseMaxDate 1.3.6.1.2.1.67.3.1.8.1.17 snmpadminstring read-only
Date when the maximum in use time was registered