RAD-SONET-MIB: View SNMP OID List / Download MIB

VENDOR: RAD DATA COMMUNICATIONS LTD.


 Home MIB: RAD-SONET-MIB
Download as:   
SNMPv2-CONF, IF-MIB, SNMP-FRAMEWORK-MIB, SNMPv2-SMI, RAD-MIB, PerfHist-TC-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 sonetInterface 1.3.6.1.4.1.164.3.1.6.2
     prtSonetPerfHistory 1.3.6.1.4.1.164.3.1.6.2.1
         prtSonetMediumTable 1.3.6.1.4.1.164.3.1.6.2.1.1 no-access
The SONET Medium table.
             prtSonetMediumEntry 1.3.6.1.4.1.164.3.1.6.2.1.1.1 no-access
An entry in the SONET Medium table. ifIndex of the lowest SONET layer of type sonet(39).
                 prtSonetMediumTimeElapsed 1.3.6.1.4.1.164.3.1.6.2.1.1.1.1 integer32 read-only
The number of seconds that have elapsed since the beginning of the near end current error- measurement period.
                 prtSonetMediumValidIntervals 1.3.6.1.4.1.164.3.1.6.2.1.1.1.2 integer32 read-only
The number of previous near end intervals for which valid data was collected. The value will be 96 unless the interface was brought online within the last 24 hours, in which case the value will be the number of complete 15 minute near end intervals since the interface has been online.
         prtSonetSectionLineCurrentTable 1.3.6.1.4.1.164.3.1.6.2.1.2 no-access
The SONET Section/Line Current table.
             prtSectionLineCurrentEntry 1.3.6.1.4.1.164.3.1.6.2.1.2.1 no-access
An entry in the SONET Section/Line Current table. ifIndex of the section/line SONET layer of type sonet(39).
                 prtSonetCurrentLOS 1.3.6.1.4.1.164.3.1.6.2.1.2.1.1 gauge32 read-only
The counter associated with the number of LOS seconds, encountered by a SONET interface in the current 15 minute interval.
                 prtSonetCurrentLOF 1.3.6.1.4.1.164.3.1.6.2.1.2.1.2 gauge32 read-only
The counter associated with the number of LOF seconds, encountered by a SONET interface in the current 15 minute interval.
                 prtSonetCurrentLineAIS 1.3.6.1.4.1.164.3.1.6.2.1.2.1.3 gauge32 read-only
The counter associated with the number of Line AIS seconds, encountered by a SONET interface in the current 15 minute interval.
                 prtSonetCurrentLineFERF 1.3.6.1.4.1.164.3.1.6.2.1.2.1.4 gauge32 read-only
The counter associated with the number of Line FERF seconds, encountered by a SONET interface in the current 15 minute interval.
                 prtSonetCurrentSectionBIP 1.3.6.1.4.1.164.3.1.6.2.1.2.1.5 gauge32 read-only
The counter associated with the number of Section BIP errors, encountered by a SONET interface in the current 15 minute interval.
                 prtSonetCurrentLineBIP 1.3.6.1.4.1.164.3.1.6.2.1.2.1.6 gauge32 read-only
The counter associated with the number of Line BIP errors, encountered by a SONET interface in the current 15 minute interval.
                 prtSonetCurrentLineFEBE 1.3.6.1.4.1.164.3.1.6.2.1.2.1.7 gauge32 read-only
The counter associated with the number of Line FEBE errors, encountered by a SONET interface in the current 15 minute interval.
                 prtSonetCurrentUAS 1.3.6.1.4.1.164.3.1.6.2.1.2.1.8 gauge32 read-only
The counter associated with the number of UAS encountered by a SONET interface in the current 15 minute interval.
                 prtSonetCurrentSES 1.3.6.1.4.1.164.3.1.6.2.1.2.1.9 gauge32 read-only
The counter associated with the number of SES encountered by a SONET interface in the current 15 minute interval.
                 prtSonetCurrentES 1.3.6.1.4.1.164.3.1.6.2.1.2.1.10 gauge32 read-only
The number of Errored Seconds, encountered by a SONET interface in the current 15 minute interval.
                 prtSonetCurrentStatus 1.3.6.1.4.1.164.3.1.6.2.1.2.1.11 octet string read-only
The statuses of the current interval: 0 - O.K. 1 - The link has been switched by a redundancy mechanism. 2 - Module is in/out. 4 - Empty - card is out.
                 prtSonetCurrentLSV 1.3.6.1.4.1.164.3.1.6.2.1.2.1.12 gauge32 read-only
The counter associated with the number of LSV seconds (Line Symbol Violation), encountered by a SONET interface in the current 15 minute interval.
         prtSonetSectionLineIntervalTable 1.3.6.1.4.1.164.3.1.6.2.1.3 no-access
The Section/Line Interval table.
             prtSectionLineIntervalEntry 1.3.6.1.4.1.164.3.1.6.2.1.3.1 no-access
An entry in the SONET Section/Line Interval table. ifIndex of the section/line SONET layer of type sonet(39).
                 prtSonetLineIntervalNumber 1.3.6.1.4.1.164.3.1.6.2.1.3.1.1 integer32 read-only
A number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the least recently completed 15 minutes interval (assuming that all 96 intervals are valid).
                 prtSonetIntervalLOS 1.3.6.1.4.1.164.3.1.6.2.1.3.1.2 gauge32 read-only
The counter associated with the number of LOS seconds , encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals.
                 prtSonetIntervalLOF 1.3.6.1.4.1.164.3.1.6.2.1.3.1.3 gauge32 read-only
The counter associated with the number of LOF seconds, encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals.
                 prtSonetIntervalLineAIS 1.3.6.1.4.1.164.3.1.6.2.1.3.1.4 gauge32 read-only
The counter associated with the number of Line AIS seconds, encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals.
                 prtSonetIntervalLineFERF 1.3.6.1.4.1.164.3.1.6.2.1.3.1.5 gauge32 read-only
The counter associated with the number of Line FERF seconds, encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals.
                 prtSonetIntervalSectionBIP 1.3.6.1.4.1.164.3.1.6.2.1.3.1.6 gauge32 read-only
The counter associated with the number of Section BIP errors, encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals.
                 prtSonetIntervalLineBIP 1.3.6.1.4.1.164.3.1.6.2.1.3.1.7 gauge32 read-only
The counter associated with the number of Line BIP errors, encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals.
                 prtSonetIntervalLineFEBE 1.3.6.1.4.1.164.3.1.6.2.1.3.1.8 gauge32 read-only
The counter associated with the number of Line FEBE errors, encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals.
                 prtSonetIntervalUAS 1.3.6.1.4.1.164.3.1.6.2.1.3.1.9 gauge32 read-only
The counter associated with the number of UAS encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals.
                 prtSonetIntervalSES 1.3.6.1.4.1.164.3.1.6.2.1.3.1.10 gauge32 read-only
The counter associated with the number of SES encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals.
                 prtSonetIntervalES 1.3.6.1.4.1.164.3.1.6.2.1.3.1.11 gauge32 read-only
The number of Errored Seconds, encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals.
                 prtSonetIntervalStatus 1.3.6.1.4.1.164.3.1.6.2.1.3.1.12 octet string read-only
The statuses of the current interval: 0 - O.K. 1 - The link has been switched by a redundancy mechanism. 2 - Module is in/out. 4 - Empty - card is out.
                 prtSonetIntervalLSV 1.3.6.1.4.1.164.3.1.6.2.1.3.1.13 gauge32 read-only
The counter associated with the number of LSV seconds (Line Symbol Violation), encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals.
         prtSonetPathCurrentTable 1.3.6.1.4.1.164.3.1.6.2.1.4 no-access
The SONET Path Current table.
             prtPathCurrentEntry 1.3.6.1.4.1.164.3.1.6.2.1.4.1 no-access
An entry in the SONET Path Current table. ifIndex of the Path SONET layer of type sonetPath(50).
                 prtSonetCurrentPathAIS 1.3.6.1.4.1.164.3.1.6.2.1.4.1.1 gauge32 read-only
The counter associated with the number of Path AIS seconds, encountered by a SONET interface in the current 15 minute interval.
                 prtSonetCurrentPathFERF 1.3.6.1.4.1.164.3.1.6.2.1.4.1.2 gauge32 read-only
The counter associated with the number of Path FERF seconds, encountered by a SONET interface in the current 15 minute interval.
                 prtSonetCurrentLOP 1.3.6.1.4.1.164.3.1.6.2.1.4.1.3 gauge32 read-only
The counter associated with the number LOP seconds, encountered by a SONET interface in the current 15 minute interval.
                 prtSonetCurrentSLM 1.3.6.1.4.1.164.3.1.6.2.1.4.1.4 gauge32 read-only
The counter associated with the number of SLM seconds, encountered by a SONET interface in the current 15 minute interval.
                 prtSonetCurrentLOC 1.3.6.1.4.1.164.3.1.6.2.1.4.1.5 gauge32 read-only
The counter associated with the number of LOC seconds, encountered by a SONET interface in the current 15 minute interval.
                 prtSonetCurrentPathBIP 1.3.6.1.4.1.164.3.1.6.2.1.4.1.6 gauge32 read-only
The counter associated with the number of Path BIP errors, encountered by a SONET interface in the current 15 minute interval.
                 prtSonetCurrentPathFEBE 1.3.6.1.4.1.164.3.1.6.2.1.4.1.7 gauge32 read-only
The counter associated with the number of Path FEBE errors, encountered by a SONET interface in the current 15 minute interval.
         prtSonetPathIntervalTable 1.3.6.1.4.1.164.3.1.6.2.1.5 no-access
The Path Interval table.
             prtPathIntervalEntry 1.3.6.1.4.1.164.3.1.6.2.1.5.1 no-access
An entry in the SONET Path Interval table.
                 prtSonetPathIntervalNumber 1.3.6.1.4.1.164.3.1.6.2.1.5.1.1 integer32 read-only
A number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the least recently completed 15 minutes interval (assuming that all 96 intervals are valid).
                 prtSonetIntervalPathAIS 1.3.6.1.4.1.164.3.1.6.2.1.5.1.2 gauge32 read-only
The counter associated with the number of Path AIS seconds , encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals.
                 prtSonetIntervalPathFERF 1.3.6.1.4.1.164.3.1.6.2.1.5.1.3 gauge32 read-only
The counter associated with the number of Path FERF seconds, encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals.
                 prtSonetIntervalLOP 1.3.6.1.4.1.164.3.1.6.2.1.5.1.4 gauge32 read-only
The counter associated with the number of LOP seconds, encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals.
                 prtSonetIntervalSLM 1.3.6.1.4.1.164.3.1.6.2.1.5.1.5 gauge32 read-only
The counter associated with the number of SLM seconds, encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals.
                 prtSonetIntervalLOC 1.3.6.1.4.1.164.3.1.6.2.1.5.1.6 gauge32 read-only
The counter associated with the number of LOC seconds, encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals.
                 prtSonetIntervalPathBIP 1.3.6.1.4.1.164.3.1.6.2.1.5.1.7 gauge32 read-only
The counter associated with the number of Path BIP errors, encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals.
                 prtSonetIntervalPathFEBE 1.3.6.1.4.1.164.3.1.6.2.1.5.1.8 gauge32 read-only
The counter associated with the number of Path FEBE errors, encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals.
         virtualIfStatistics 1.3.6.1.4.1.164.3.1.6.2.1.6
             virtualIfCurrentTable 1.3.6.1.4.1.164.3.1.6.2.1.6.1 no-access
The Virtual Interface Current table.
                 virtualIfCurrentEntry 1.3.6.1.4.1.164.3.1.6.2.1.6.1.1 no-access
An entry in the Virtual Interface Current table.
                     virtualIfCurrentMinActiveVC 1.3.6.1.4.1.164.3.1.6.2.1.6.1.1.1 integer32 read-only
This object holds the minimum number of active virtual containers (VCs) of the Virtual Concatenation Group in the current 15-minute interval.
                     virtualIfCurrentMaxActiveVC 1.3.6.1.4.1.164.3.1.6.2.1.6.1.1.2 integer32 read-only
This object holds the maximum number of active virtual containers (VCs) of the Virtual Concatenation Group in the current 15-minute interval.
                     virtualIfCurrentRxFrames 1.3.6.1.4.1.164.3.1.6.2.1.6.1.1.3 counter64 read-only
This counter is associated with the number of frames received from STS-3/STM-1 by a Virtual Interface in the current 15-minute interval.
                     virtualIfCurrentTxFrames 1.3.6.1.4.1.164.3.1.6.2.1.6.1.1.4 counter64 read-only
This counter is associated with the number of frames transmitted to STS-3/STM-1 by a Virtual Interface in the current 15-minute interval.
                     virtualIfCurrentRxAbortFrames 1.3.6.1.4.1.164.3.1.6.2.1.6.1.1.5 perfcurrentcount read-only
The counter associated with the number of Received Aborted frames encountered by a Virtual Interface in the current 15-minute interval.
                     virtualIfCurrentTxAbortFrames 1.3.6.1.4.1.164.3.1.6.2.1.6.1.1.6 perfcurrentcount read-only
The counter associated with the number of Transmitted Aborted frames encountered by a Virtual Interface in the current 15-minute interval.
                     virtualIfCurrentMinLengthViolation 1.3.6.1.4.1.164.3.1.6.2.1.6.1.1.7 perfcurrentcount read-only
This counter is associated with the number of Rx payload Min Length Violation frames encountered by a Virtual Interface in the current 15-minute interval.
                     virtualIfCurrentMaxLengthViolation 1.3.6.1.4.1.164.3.1.6.2.1.6.1.1.8 perfcurrentcount read-only
This counter is associated with the number of Rx payload Max Length Violation frames encountered by a Virtual Interface in the current 15-minute interval.
                     virtualIfCurrentFcsError 1.3.6.1.4.1.164.3.1.6.2.1.6.1.1.9 perfcurrentcount read-only
The counter is associated with the number of Frame Check Sequence errors encountered by a Virtual Interface in the current 15-minute interval.
                     virtualIfCurrentByteDestuffingViolation 1.3.6.1.4.1.164.3.1.6.2.1.6.1.1.10 perfcurrentcount read-only
The counter associated with the number of Byte De-stuffing Violations encountered by a Virtual Interface in the current 15-minute interval.
                     virtualIfCurrentAdressMismatch 1.3.6.1.4.1.164.3.1.6.2.1.6.1.1.11 perfcurrentcount read-only
The counter associated with the number of Adress Mismatch encountered by a Virtual Interface in the current 15-minute interval.
                     virtualIfCurrentControlMismatch 1.3.6.1.4.1.164.3.1.6.2.1.6.1.1.12 perfcurrentcount read-only
The counter associated with the number of Control Mismatch encountered by a Virtual Interface in the current 15-minute interval.
                     virtualIfCurrentActiveVC 1.3.6.1.4.1.164.3.1.6.2.1.6.1.1.13 integer32 read-only
This object holds the number of active virtual containers (VCs) of the Virtual Concatenation Group in the current 15-minute interval.
             virtualIfIntervalTable 1.3.6.1.4.1.164.3.1.6.2.1.6.2 no-access
The Virtual Interface Interval table.
                 virtualIfIntervalEntry 1.3.6.1.4.1.164.3.1.6.2.1.6.2.1 no-access
An entry in the Virtual Interface Interval table.
                     virtualIfIntervalNumber 1.3.6.1.4.1.164.3.1.6.2.1.6.2.1.1 integer32 no-access
A number between 1 and 96, which identifies the interval for which the set of statistics is available. The interval identified by 1 is the most recently completed 15 minute interval, and the interval identified by N is the interval immediately preceding the one identified by N-1.
                     virtualIfIntervalMinActiveVC 1.3.6.1.4.1.164.3.1.6.2.1.6.2.1.2 integer32 read-only
This object holds the minimum number of active virtual containers (VCs) of the Virtual Concatenation Group, in a particular 15-minute interval in the past 24 hours.
                     virtualIfIntervalMaxActiveVC 1.3.6.1.4.1.164.3.1.6.2.1.6.2.1.3 integer32 read-only
This object holds the maximum number of active virtual containers (VCs) of the Virtual Concatenation Group, in a particular 15-minute interval in the past 24 hours.
                     virtualIfIntervalRxFrames 1.3.6.1.4.1.164.3.1.6.2.1.6.2.1.4 counter64 read-only
This counter is associated with the number of frames received from STS-3/STM-1 by a Virtual Interface in a particular 15-minute interval in the past 24 hours.
                     virtualIfIntervalTxFrames 1.3.6.1.4.1.164.3.1.6.2.1.6.2.1.5 counter64 read-only
This counter is associated with the number of frames transmitted to STS-3/STM-1 by a Virtual Interface in a particular 15-minute interval in the past 24 hours.
                     virtualIfIntervalRxAbortFrames 1.3.6.1.4.1.164.3.1.6.2.1.6.2.1.6 perfintervalcount read-only
This counter is associated with the number of Received Abort frames encountered by a Virtual Interface in a particular 15-minute interval in the past 24 hours.
                     virtualIfIntervalTxAbortFrames 1.3.6.1.4.1.164.3.1.6.2.1.6.2.1.7 perfintervalcount read-only
This counter is associated with the number of Transmitted Abort frames encountered by a Virtual Interface in a particular 15-minute interval in the past 24 hours.
                     virtualIfIntervalMinLengthViolation 1.3.6.1.4.1.164.3.1.6.2.1.6.2.1.8 perfintervalcount read-only
This counter is associated with the number of Rx payload Min Length Violation frames encountered by a Virtual Interface in a particular 15-minute interval in the past 24 hours.
                     virtualIfIntervalMaxLengthViolation 1.3.6.1.4.1.164.3.1.6.2.1.6.2.1.9 perfintervalcount read-only
This counter is associated with the number of Rx payload Max Length Violation frames encountered by a Virtual Interface in a particular 15-minute interval in the past 24 hours.
                     virtualIfIntervalFcsError 1.3.6.1.4.1.164.3.1.6.2.1.6.2.1.10 perfintervalcount read-only
This counter is associated with the number of Frame Check Sequence errors encountered by a Virtual Interface in a particular 15-minute interval in the past 24 hours.
                     virtualIfIntervalByteDestuffingViolation 1.3.6.1.4.1.164.3.1.6.2.1.6.2.1.11 perfintervalcount read-only
This counter is associated with the number of Byte De-stuffing Violations encountered by a Virtual Interface in a particular 15-minute interval in the past 24 hours.
                     virtualIfIntervalAdressMismatch 1.3.6.1.4.1.164.3.1.6.2.1.6.2.1.12 perfintervalcount read-only
This counter is associated with the number of Address Mismatch encountered by a Virtual Interface in a particular 15-minute interval in the past 24 hours.
                     virtualIfIntervalControlMismatch 1.3.6.1.4.1.164.3.1.6.2.1.6.2.1.13 perfintervalcount read-only
This counter is associated with the number of Control mismatch encountered by a Virtual Interface in a particular 15-minute interval in the past 24 hours.
                     virtualIfIntervalBelowMinThreshold 1.3.6.1.4.1.164.3.1.6.2.1.6.2.1.14 perfintervalcount read-only
This counter is associated with the number of seconds that number of active VCs was below minimum threshold defined by vcGroupCnfgNoOfVCs, encountered by Virtual Interface in a particular 15-minute interval in the past 24 hours.
             virtualIfLAPSCurrentTable 1.3.6.1.4.1.164.3.1.6.2.1.6.3 no-access
The Virtual Interface LAPS Current table.
                 virtualIfLAPSCurrentEntry 1.3.6.1.4.1.164.3.1.6.2.1.6.3.1 no-access
An entry in the Virtual Interface LAPS Current table.
                     virtualIfLAPSCurrentSapiMismatch 1.3.6.1.4.1.164.3.1.6.2.1.6.3.1.1 perfcurrentcount read-only
This counter is associated with the number of received SAPI field mismatch encountered by a Virtual Interface in the current 15-minute interval.
             virtualIfLAPSIntervalTable 1.3.6.1.4.1.164.3.1.6.2.1.6.4 no-access
The Virtual Interface LAPS table.
                 virtualIfLAPSIntervalEntry 1.3.6.1.4.1.164.3.1.6.2.1.6.4.1 no-access
An entry in the Virtual Interface LAPS Interval table.
                     virtualIfLAPSIntervalSapiMismatch 1.3.6.1.4.1.164.3.1.6.2.1.6.4.1.1 perfintervalcount read-only
This counter is associated with the number of received SAPI field mismatch encountered by a Virtual Interface in a particular 15-minute interval in the past 24 hours.
             virtualIfLAPFCurrentTable 1.3.6.1.4.1.164.3.1.6.2.1.6.5 no-access
The Virtual Interface LAPF Current table.
                 virtualIfLAPFCurrentEntry 1.3.6.1.4.1.164.3.1.6.2.1.6.5.1 no-access
An entry in the Virtual Interface LAPF Current table.
                     virtualIfLAPFCurrentNlpidMismatch 1.3.6.1.4.1.164.3.1.6.2.1.6.5.1.1 perfcurrentcount read-only
This counter is associated with the number of received NLPID field mismatch encountered by a Virtual Interface in the current 15-minute interval.
                     virtualIfLAPFCurrentOuiMismatch 1.3.6.1.4.1.164.3.1.6.2.1.6.5.1.2 perfcurrentcount read-only
This counter is associated with the number of received OUI field mismatch encountered by a Virtual Interface in the current 15-minute interval.
                     virtualIfLAPFCurrentPidMismatch 1.3.6.1.4.1.164.3.1.6.2.1.6.5.1.3 perfcurrentcount read-only
This counter is associated with the number of received PID field mismatch encountered by a Virtual Interface in the current 15-minute interval.
                     virtualIfLAPFCurrentDlciMismatch 1.3.6.1.4.1.164.3.1.6.2.1.6.5.1.4 perfcurrentcount read-only
This counter is associated with the number of received DLCI field mismatch encountered by a Virtual Interface in the current 15-minute interval.
                     virtualIfLAPFCurrentMacRxFrames 1.3.6.1.4.1.164.3.1.6.2.1.6.5.1.5 perfcurrentcount read-only
This counter is associated with the number of frames received from LAN by a Virtual Interface in the current 15-minute interval.
                     virtualIfLAPFCurrentMacTxFrames 1.3.6.1.4.1.164.3.1.6.2.1.6.5.1.6 perfcurrentcount read-only
This counter is associated with the number of frames transmitted to LAN by a Virtual Interface in the current 15-minute interval.
             virtualIfLAPFIntervalTable 1.3.6.1.4.1.164.3.1.6.2.1.6.6 no-access
The Virtual Interface LAPF Interval table.
                 virtualIfLAPFIntervalEntry 1.3.6.1.4.1.164.3.1.6.2.1.6.6.1 no-access
An entry in the Virtual Interface Interval table.
                     virtualIfLAPFIntervalNlpidMismatch 1.3.6.1.4.1.164.3.1.6.2.1.6.6.1.1 perfintervalcount read-only
This counter is associated with the number of received NLPID field mismatch encountered by a Virtual Interface in a particular 15-minute interval in the past 24 hours.
                     virtualIfLAPFIntervalOuiMismatch 1.3.6.1.4.1.164.3.1.6.2.1.6.6.1.2 perfintervalcount read-only
This counter is associated with the number of received OUI field mismatch encountered by a Virtual Interface in a particular 15-minute interval in the past 24 hours.
                     virtualIfLAPFIntervalPidMismatch 1.3.6.1.4.1.164.3.1.6.2.1.6.6.1.3 perfintervalcount read-only
This counter is associated with the number of received PID field mismatch encountered by a Virtual Interface in a particular 15-minute interval in the past 24 hours.
                     virtualIfLAPFIntervalDlciMismatch 1.3.6.1.4.1.164.3.1.6.2.1.6.6.1.4 perfintervalcount read-only
This counter is associated with the number of received DLCI field mismatch by a Virtual Interface in a particular 15-minute interval in the past 24 hours.
                     virtualIfLAPFIntervalMacRxFrames 1.3.6.1.4.1.164.3.1.6.2.1.6.6.1.5 perfintervalcount read-only
This counter is associated with the number of frames received from LAN by a Virtual Interface in a particular 15-minute interval in the past 24 hours.
                     virtualIfLAPFIntervalMacTxFrames 1.3.6.1.4.1.164.3.1.6.2.1.6.6.1.6 perfintervalcount read-only
This counter is associated with the number of frames transmitted to LAN encountered by a Virtual Interface in a particular 15-minute interval in the past 24 hours.
             virtualIfGFPCurrentTable 1.3.6.1.4.1.164.3.1.6.2.1.6.7 no-access
The Virtual Interface GFP Current table.
                 virtualIfGFPCurrentEntry 1.3.6.1.4.1.164.3.1.6.2.1.6.7.1 no-access
An entry in the Virtual Interface GFP Current table.
                     virtualIfGFPCurrentIdleFrameError 1.3.6.1.4.1.164.3.1.6.2.1.6.7.1.1 perfcurrentcount read-only
This counter is associated with the number of received GFP IDLE frames that are detected to be in error, encountered by a Virtual Interface in the current 15-minute interval.
                     virtualIfGFPCurrentCHecSbError 1.3.6.1.4.1.164.3.1.6.2.1.6.7.1.2 perfcurrentcount read-only
This counter is associated with the number of received GFP frames that are detected to have single-bit errors in the Core header (i.e. cHEC field) only, encountered by a Virtual Interface in the current 15-minute interval.
                     virtualIfGFPCurrentPtiMismatch 1.3.6.1.4.1.164.3.1.6.2.1.6.7.1.3 perfcurrentcount read-only
This counter is associated with the number of rreceived GFP frames that are detected with a mismatch on the PTI field (i.e. value of PTI is not equal to Client Data or Management frame), encountered by a Virtual Interface in the current 15-minute interval.
                     virtualIfGFPCurrentExiMismatch 1.3.6.1.4.1.164.3.1.6.2.1.6.7.1.4 perfcurrentcount read-only
This counter is associated with the number of received GFP frames that are detected with a mismatch on the EXI field (i.e. value of EXI is not equal to NULL or LINEAR modes), encountered by a Virtual Interface in the current 15-minute interval.
                     virtualIfGFPCurrentUpiMismatch 1.3.6.1.4.1.164.3.1.6.2.1.6.7.1.5 perfcurrentcount read-only
This counter is associated with the number of received GFP frames that are detected with a mismatch on the UPI field (i.e. value of EXI is not equal to 00000001), encountered by a Virtual Interface in the current 15-minute interval.
                     virtualIfGFPCurrentTHecSbError 1.3.6.1.4.1.164.3.1.6.2.1.6.7.1.6 perfcurrentcount read-only
This counter is associated with the number of received GFP frames that are detected to only have single-bit errors in the Type header (i.e. tHEC field), encountered by a Virtual Interface in the current 15-minute interval.
                     virtualIfGFPCurrentTHecMbError 1.3.6.1.4.1.164.3.1.6.2.1.6.7.1.7 perfcurrentcount read-only
This counter is associated with the number of received GFP frames that are detected to only have multi-bit errors in the Type header (i.e. tHEC field), encountered by a Virtual Interface in the current 15-minute interval.
                     virtualIfGFPCurrentCidMismatch 1.3.6.1.4.1.164.3.1.6.2.1.6.7.1.8 perfcurrentcount read-only
This counter is associated with the number of received GFP frames that are detected to have a mismatch/unsupported value in the CID field only, encountered by a Virtual Interface in the current 15-minute interval.
                     virtualIfGFPCurrentEHecSbError 1.3.6.1.4.1.164.3.1.6.2.1.6.7.1.9 perfcurrentcount read-only
This counter is associated with the number of received GFP frames that are detected to only have single-bit errors in the Extension header (i.e. eHEC field), encountered by a Virtual Interface in the current 15-minute interval.
                     virtualIfGFPCurrentEHecMbError 1.3.6.1.4.1.164.3.1.6.2.1.6.7.1.10 perfcurrentcount read-only
This counter is associated with the number of received GFP frames that are detected to only have single-bit errors in the Extension header (i.e. eHEC field), encountered by a Virtual Interface in the current 15-minute interval.
             virtualIfGFPIntervalTable 1.3.6.1.4.1.164.3.1.6.2.1.6.8 no-access
The Virtual Interface GFP Interval table.
                 virtualIfGFPIntervalEntry 1.3.6.1.4.1.164.3.1.6.2.1.6.8.1 no-access
An entry in the Virtual Interface GFP Interval table.
                     virtualIfGFPIntervalIdleFrameError 1.3.6.1.4.1.164.3.1.6.2.1.6.8.1.1 perfintervalcount read-only
This counter is associated with the number of received GFP IDLE frames that are detected to be in error, encountered by a Virtual Interface in a particular 15-minute interval in the past 24 hours.
                     virtualIfGFPIntervalCHecSbError 1.3.6.1.4.1.164.3.1.6.2.1.6.8.1.2 perfintervalcount read-only
This counter is associated with the number of received GFP frames that are detected to have single-bit errors in the Core header (i.e. cHEC field) only, encountered by a Virtual Interface in a particular 15-minute interval in the past 24 hours.
                     virtualIfGFPIntervalPtiMismatch 1.3.6.1.4.1.164.3.1.6.2.1.6.8.1.3 perfintervalcount read-only
This counter is associated with the number of rreceived GFP frames that are detected with a mismatch on the PTI field (i.e. value of PTI is not equal to Client Data or Management frame), encountered by a Virtual Interface in a particular 15-minute interval in the past 24 hours.
                     virtualIfGFPIntervalExiMismatch 1.3.6.1.4.1.164.3.1.6.2.1.6.8.1.4 perfintervalcount read-only
This counter is associated with the number of received GFP frames that are detected with a mismatch on the EXI field (i.e. value of EXI is not equal to NULL or LINEAR modes), encountered by a Virtual Interface in a particular 15-minute interval in the past 24 hours.
                     virtualIfGFPIntervalUpiMismatch 1.3.6.1.4.1.164.3.1.6.2.1.6.8.1.5 perfintervalcount read-only
This counter is associated with the number of received GFP frames that are detected with a mismatch on the UPI field (i.e. value of EXI is not equal to 00000001), encountered by a Virtual Interface in a particular 15-minute interval in the past 24 hours.
                     virtualIfGFPIntervalTHecSbError 1.3.6.1.4.1.164.3.1.6.2.1.6.8.1.6 perfintervalcount read-only
This counter is associated with the number of received GFP frames that are detected to only have single-bit errors in the Type header (i.e. tHEC field), encountered by a Virtual Interface in a particular 15-minute interval in the past 24 hours.
                     virtualIfGFPIntervalTHecMbError 1.3.6.1.4.1.164.3.1.6.2.1.6.8.1.7 perfintervalcount read-only
This counter is associated withthe number of received GFP frames that are detected to only have multi-bit errors in the Type header (i.e. tHEC field), encountered by a Virtual Interface in a particular 15-minute interval in the past 24 hours.
                     virtualIfGFPIntervalCidMismatch 1.3.6.1.4.1.164.3.1.6.2.1.6.8.1.8 perfintervalcount read-only
This counter is associated with the number of received GFP frames that are detected to have a mismatch/unsupported value in the CID field only, encountered by a Virtual Interface in a particular 15-minute interval in the past 24 hours.
                     virtualIfGFPIntervalEHecSbError 1.3.6.1.4.1.164.3.1.6.2.1.6.8.1.9 perfintervalcount read-only
This counter is associated with the number of received GFP frames that are detected to only have single-bit errors in the Extension header (i.e. eHEC field), encountered by a Virtual Interface in a particular 15-minute interval in the past 24 hours.
                     virtualIfGFPIntervalEHecMbError 1.3.6.1.4.1.164.3.1.6.2.1.6.8.1.10 perfintervalcount read-only
This counter is associated with the the number of received GFP frames that are detected to only have multi-bit errors in the Extension header (i.e. eHEC field), encountered by a Virtual Interface in a particular 15-minute interval in the past 24 hours.
     prtSonetConfig 1.3.6.1.4.1.164.3.1.6.2.2
         prtSonetGen 1.3.6.1.4.1.164.3.1.6.2.2.1
             prtSonetGenTable 1.3.6.1.4.1.164.3.1.6.2.2.1.1 no-access
Sonet/SDH general port configuration table.
                 prtSonetGenEntry 1.3.6.1.4.1.164.3.1.6.2.2.1.1.1 no-access
An entry in the Sonet/SDH general port configuration table.
                     prtSonetGenCnfgIdx 1.3.6.1.4.1.164.3.1.6.2.2.1.1.1.1 integer32 read-only
This object indicates the Idx of the Config being accessed. Idx of 255 relates to the Temporary (Scratch) Config. For products that support several configurations, Set can be performed only to the Temporary Config (=255).
                     prtSonetGenIdx 1.3.6.1.4.1.164.3.1.6.2.2.1.1.1.2 integer32 read-only
This object indicates a unique port or interface number. For numbering, see product's spec. For some products, the numbering can equal ifIndex.
                     prtSonetGenSdThreshold 1.3.6.1.4.1.164.3.1.6.2.2.1.1.1.3 integer read-write
SD=Signal Degraded Threshold. Units: [10E-]. The threshold is 10E-x relative to the frequency of the data flow. x=3, 4, 5, 6, 7, 8, 9. n3= 10E-3 n4= 10E-4 n5= 10E-5 n6= 10E-6 n7= 10E-7 n8= 10E-8 n9= 10E-9 . Enumeration: 'n9': 9, 'n8': 8, 'notApplicable': 1, 'n3': 3, 'n4': 4, 'n5': 5, 'n6': 6, 'n7': 7.
                     prtSonetGenEedThreshold 1.3.6.1.4.1.164.3.1.6.2.2.1.1.1.4 integer read-write
EED=Excessive Error Defect Threshold. Units: [10E-]. The threshold is 10E-x relative to the frequency of the data flow. x=3, 4, 5, 6, 7, 8, 9. n3= 10E-3 n4= 10E-4 n5= 10E-5 n6= 10E-6 n7= 10E-7 n8= 10E-8 n9= 10E-9 . Enumeration: 'n9': 9, 'n8': 8, 'notApplicable': 1, 'n3': 3, 'n4': 4, 'n5': 5, 'n6': 6, 'n7': 7.
                     prtSonetGenBerEnable 1.3.6.1.4.1.164.3.1.6.2.2.1.1.1.5 integer read-write
Controls the activation of the Line Ber (Bit Error Rate), means whether SD and EED threshold parameters will be enabled. Enumeration: 'notApplicable': 1, 'enable': 3, 'disable': 2.
         prtSonetStm1 1.3.6.1.4.1.164.3.1.6.2.2.2
             prtSonetStm1Table 1.3.6.1.4.1.164.3.1.6.2.2.2.1 no-access
Sonet/SDH STM-1 port configuration table.
                 prtSonetStm1Entry 1.3.6.1.4.1.164.3.1.6.2.2.2.1.1 no-access
An entry in the Sonet/SDH STM-1 port configuration table.
                     prtSonetStm1CnfgIdx 1.3.6.1.4.1.164.3.1.6.2.2.2.1.1.1 integer32 read-only
This object indicates the Idx of the Config being accessed. Idx of 255 relates to the Temporary (Scratch) Config. For products that support several configurations, Set can be performed only to the Temporary Config (=255).
                     prtSonetStm1Idx 1.3.6.1.4.1.164.3.1.6.2.2.2.1.1.2 integer32 read-only
This object indicates a unique port or interface number. For numbering, see product's spec. For some products, the numbering can equal ifIndex.
                     prtSonetStm1ClockSrc 1.3.6.1.4.1.164.3.1.6.2.2.2.1.1.3 integer read-write
Clock Source of the STM-1 port. lbt = Loop Back Timing. Enumeration: 'notApplicable': 1, 'internal': 2, 'systemClk': 4, 'lbt': 3.
                     prtSonetStm1DccMode 1.3.6.1.4.1.164.3.1.6.2.2.2.1.1.4 integer read-write
DCC Mode. DCC=Data Communication Channel. d1ToD3 = D1-D3 bytes are used (RS=Regeneration Section). d4ToD12= D4-D12 bytes are used (MS=Multiplexing Section). d1.... d12 enable user to select single DCC byte Enumeration: 'none': 2, 'd5': 9, 'd10': 14, 'd11': 15, 'd12': 16, 'd9': 13, 'notApplicable': 1, 'd8': 12, 'd1ToD3': 3, 'd6': 10, 'd7': 11, 'd4': 8, 'd4ToD12': 4, 'd2': 6, 'd3': 7, 'd1': 5.
                     prtSonetStm1RoutingProt 1.3.6.1.4.1.164.3.1.6.2.2.2.1.1.5 integer read-write
Routing Protocol. Enumeration: 'notApplicable': 1, 'none': 2, 'proprietary': 3, 'rip2': 4.
                     prtSonetStm1MngProt 1.3.6.1.4.1.164.3.1.6.2.2.2.1.1.6 integer read-write
Management Protocol over DCC: Proprietary, PPP, Frame Relay, HDLC or LAPD over HDLC . ppp = according to STD-51 ( rfc1661/1662) pppType1= ppp without sendind ADD CONTROL overhead in Link Control Protocol (LCP) packets Enumeration: 'proprietary': 3, 'hdlc': 7, 'notApplicable': 1, 'ppp': 5, 'lapdOverHdlc': 8, 'frameRelay': 6.
                     prtSonetStm1OperationalMode 1.3.6.1.4.1.164.3.1.6.2.2.2.1.1.7 integer read-write
Operational Mode. linear - cannot be selected when there is Redundancy between the STM-1 ports. Enumeration: 'terminal': 2, 'notApplicable': 1, 'linearProtection': 4, 'linear': 3.
                     prtSonetStm1VoiceChannel 1.3.6.1.4.1.164.3.1.6.2.2.2.1.1.8 integer read-write
This parameter enable user to select whether voice channel will be transferred using E1 byte, E2 Byte, or not at all. Enumeration: 'notApplicable': 1, 'none': 2, 'e1Byte': 3, 'e2Byte': 4.
                     prtSonetStm1OutputRate 1.3.6.1.4.1.164.3.1.6.2.2.2.1.1.9 integer32 read-write
This parameter indicates the output rate in cells/sec, which is supported per port.
                     prtSonetStm1S1ProtocolClock 1.3.6.1.4.1.164.3.1.6.2.2.2.1.1.10 integer read-write
This parameter allows user to select whether to enable use of Remote Side Clock according to the Protocol passed on S1 Bit. Enumeration: 'notApplicable': 1, 'enable': 3, 'disable': 2, 'transparent': 4.
                     prtSonetStm1GatewayRingSubnetAddress 1.3.6.1.4.1.164.3.1.6.2.2.2.1.1.11 ipaddress read-write
This parameter defines subnet for static routing, together with prtSonetStm1GatewayRingSubnetMask
                     prtSonetStm1GatewayRingSubnetMask 1.3.6.1.4.1.164.3.1.6.2.2.2.1.1.12 ipaddress read-write
This parameter defines subnet for static routing, together with prtSonetStm1GatewayRingSubnetAddress
                     prtSonetStm1MngProtDeviationType 1.3.6.1.4.1.164.3.1.6.2.2.2.1.1.13 integer read-write
This parameter is used in conjunction with prtSonetStm1MngProt to define management protocol used & type of deviation (if exist) from standard. Standard = no deviation from standard protocol Type1 = PPP without sending Address and Control overhead in Link Control Protocol (LCP) packets Enumeration: 'notApplicable': 1, 'type1': 3, 'standard': 2.
         prtSonetVc 1.3.6.1.4.1.164.3.1.6.2.2.3
             prtSonetVcTable 1.3.6.1.4.1.164.3.1.6.2.2.3.1 no-access
Sonet/SDH VC port configuration table.
                 prtSonetVcEntry 1.3.6.1.4.1.164.3.1.6.2.2.3.1.1 no-access
An entry in the Sonet/SDH VC port configuration table.
                     prtSonetVcCnfgIdx 1.3.6.1.4.1.164.3.1.6.2.2.3.1.1.1 integer32 read-only
This object indicates the Idx of the Config being accessed. Idx of 255 relates to the Temporary (Scratch) Config. For products that support several configurations, Set can be performed only to the Temporary Config (=255).
                     prtSonetVcIdx 1.3.6.1.4.1.164.3.1.6.2.2.3.1.1.2 integer32 read-only
This object indicates a unique port or interface number. For numbering, see product's spec. For some products, the numbering can equal ifIndex.
                     prtSonetVcJTxPathTraceEnable 1.3.6.1.4.1.164.3.1.6.2.2.3.1.1.3 integer read-write
Enable/Disable Transmitting Jy Path Trace. y=1, 2: J1 - for VC-4 layer J2 - for VC-12 layer. Enumeration: 'notApplicable': 1, 'enable': 3, 'disable': 2.
                     prtSonetVcJRxPathTraceEnable 1.3.6.1.4.1.164.3.1.6.2.2.3.1.1.4 integer read-write
Enable/Disable checking Jy Path Trace. y=1, 2: J1 - for VC-4 layer J2 - for VC-12 layer. Enumeration: 'notApplicable': 1, 'enable': 3, 'disable': 2.
                     prtSonetVcJPathTrace 1.3.6.1.4.1.164.3.1.6.2.2.3.1.1.5 displaystring read-write
Jy Path Trace. y=1, 2: J1 - for VC-4 layer J2 - for VC-12 layer. This object is applicable only if one of the previous 2 objects is 'enable'.
                     prtSonetVcConnect 1.3.6.1.4.1.164.3.1.6.2.2.3.1.1.6 integer read-write
Connect VCn (n - 11,12,2,3,4) port (yes/no). Enumeration: 'notApplicable': 1, 'yes': 3, 'no': 2.
                     prtSonetVcSignalLabel 1.3.6.1.4.1.164.3.1.6.2.2.3.1.1.7 octet string read-write
Signal Label. For VC-3: The SONET standard defines the C2 byte as the path signal label. The purpose of this byte is to communicate the payload type being encapsulated by the SONET Framing OverHead. It allows a single interface to transport multiple payload types simultaneously. For VC-12, VT-1.5: VT path overhead V5 byte allocates bits 5-7 for VT Path Signal Label, to indicate the content of the VT SPE. 000 Unequipped 001 Equipped : non-specific payload 010 Asynchronous mapping 011 Bit synchronous mapping (no longer valid for DS1) 100 Byte synchronous mapping 101 Unassigned 110 Unassigned 111 Unassigned Agents that do not support this feature will send SIZE 0.
             prtSonetTuTable 1.3.6.1.4.1.164.3.1.6.2.2.3.2 no-access
The write operation into the Table's Objects is valid only for the TmpCnfg entry (Scratch).
                 prtSonetTuEntry 1.3.6.1.4.1.164.3.1.6.2.2.3.2.1 no-access
An entry in table.
                     prtSonetTuCnfgIdx 1.3.6.1.4.1.164.3.1.6.2.2.3.2.1.1 integer32 read-only
This object indicates the Idx of the Config being accessed. Idx of 255 relates to the Temporary (Scratch) Config. For products that support several configurations, Set can be performed only to the Temporary Config (=255).
                     prtSonetTuPrtIdx 1.3.6.1.4.1.164.3.1.6.2.2.3.2.1.2 integer32 read-only
This object indicates a unique port or interface number. For port numbering, see product's spec. For some products, the numbering can equal ifIndex.
                     prtSonetTuIdx 1.3.6.1.4.1.164.3.1.6.2.2.3.2.1.3 integer32 read-only
This object indicates a unique TU (Tributary Unit) within VC-4. The valid TUs are 1..63.
                     prtSonetTuConPrtIdx 1.3.6.1.4.1.164.3.1.6.2.2.3.2.1.4 integer32 read-only
This object indicates the connected port, when prtSonetTuType=connect. For port numbering, see product's spec. For some products, the numbering can equal ifIndex. notApplicable - will be indicated as 100.
                     prtSonetTuType 1.3.6.1.4.1.164.3.1.6.2.2.3.2.1.5 integer read-only
The type of TU (Tributary Unit). connect - connected to one of the E1 ports. bypass - bypassed to the other VC4 port. TUs that are not connected or bypassed, will not exist in this table. Enumeration: 'connect': 2, 'bypass': 3.
                     prtSonetTuMode 1.3.6.1.4.1.164.3.1.6.2.2.3.2.1.6 integer read-only
TU Mode of connection. addAndDrop - Add & Drop add - Add (TU receives from the E1 ports). Enumeration: 'notApplicable': 1, 'add': 3, 'addAndDrop': 2.
                     prtSonetTuRowStatus 1.3.6.1.4.1.164.3.1.6.2.2.3.2.1.7 rowstatus read-only
Creation/Deletion of rows in the table.
         prtVcGroupCnfg 1.3.6.1.4.1.164.3.1.6.2.2.4
             vcGroupCnfgTable 1.3.6.1.4.1.164.3.1.6.2.2.4.1 no-access
The Virtual Concatenation Group configuration table.
                 vcGroupCnfgEntry 1.3.6.1.4.1.164.3.1.6.2.2.4.1.1 no-access
An entry in the Virtual Concatenation Group configuration table.
                     vcGroupCnfgIdx 1.3.6.1.4.1.164.3.1.6.2.2.4.1.1.1 integer32 no-access
This object indicates the Idx of the Config being accessed. Idx of 255 relates to the Temporary (Scratch) Config. For products that support several configurations, Set can be performed only to the Temporary Config (=255).
                     vcGroupCnfgNumber 1.3.6.1.4.1.164.3.1.6.2.2.4.1.1.2 integer32 no-access
Virtual Concatenation Group Number. For FCD=155 up to eight groups are defined valid values are 1..8
                     vcGroupCnfgRowStatus 1.3.6.1.4.1.164.3.1.6.2.2.4.1.1.3 rowstatus read-only
Creation/Deletion of rows in the table.
                     vcGroupCnfgVcType 1.3.6.1.4.1.164.3.1.6.2.2.4.1.1.4 integer read-only
User may select type of SDH Virtual Containers (VC) (SONET Virtual Tributaries VT ) to be concatenated in this Virtual Concatenation Group. For SDH, values 2,3,4 are valid. For SONET, values 5 and 6 are valid. Enumeration: 'vc12': 2, 'vt1dot5': 5, 'sts1': 6, 'notApplicable': 1, 'vc3': 3, 'vc4': 4.
                     vcGroupCnfgNoOfVCs 1.3.6.1.4.1.164.3.1.6.2.2.4.1.1.5 integer32 read-only
User may select number of Virtual Containers (VC) (SONET Virtual Tributaries VT ) to be concatenated in this Virtual Concatenation Group. Valid range for this number depends on type VC selected by vcGroupCnfgVCType For SDH, up to 63 VC12, or up to 3 VC3, or 1 VC4 are valid For SONET, up to 84 VT1.5 without LCAS, or 64 VT1.5 under LCAS control. or up tp 3 STS-1/SPE, or 1 STS-3
                     vcGroupCnfgLCAS 1.3.6.1.4.1.164.3.1.6.2.2.4.1.1.6 integer read-only
This object controls Link Capacity Adjustment Scheme (LCAS) activation. Enumeration: 'notApplicable': 1, 'lcasActive': 3, 'lcasNotActive': 2.
                     vcGroupCnfgEncapsulation 1.3.6.1.4.1.164.3.1.6.2.2.4.1.1.7 integer read-only
This object enables user to select encapsulation method. Enumeration: 'notApplicable': 1, 'laps': 2, 'gfp': 4, 'lapf': 3.
                     vcGroupCnfgGroupIfIndex 1.3.6.1.4.1.164.3.1.6.2.2.4.1.1.8 interfaceindex read-only
The ifIndex assigend to this group.
                     vcGroupCnfgRip2 1.3.6.1.4.1.164.3.1.6.2.2.4.1.1.9 integer read-only
This object controls RIP 2. User may select to send RIP 2 message over selected group or not Enumeration: 'notApplicable': 1, 'yes': 3, 'no': 2.
                     vcGroupCnfgGfpChId 1.3.6.1.4.1.164.3.1.6.2.2.4.1.1.10 integer32 read-only
Generic Framing Procedure (GFP) Channel ID, Valid only when vcGroupCnfgEncapsulation = gfp (4) Valid values are 0x00 - oxFF (hex)
                     vcGroupCnfgK4 1.3.6.1.4.1.164.3.1.6.2.2.4.1.1.11 integer read-only
This object controls whether K4 byte (of Line Overhead) is used as an indication for virtual concatenation (VCAT). This object is applicable, when VCG includes only a single Virtual Container (VC) (or SONET VT) Enumeration: 'notApplicable': 1, 'yes': 3, 'no': 2.
                     vcGroupCnfgExSignalLabel 1.3.6.1.4.1.164.3.1.6.2.2.4.1.1.12 octet string read-only
Extended Signal Label. Relevant only when vcGroupCnfgK4 = yes(3). Agents that do not support this feature will send SIZE 0.
                     vcGroupCnfgLcasMinNoOfVCs 1.3.6.1.4.1.164.3.1.6.2.2.4.1.1.13 integer32 read-only
Minimum number of VC's to declare alarm, in LCAS mode. Applicable only when LCAS is active (vcGroupCnfgLCAS =lcasActive) 1...63 for SDH, 1...84 for SONET 0= not applicable.
                     vcGroupCnfgLcasStatus 1.3.6.1.4.1.164.3.1.6.2.2.4.1.1.14 integer read-only
This object summarize LCAS states of all VCs in VCG: belowMinNoOfVCs - Number of VCs in Norm state is less than the minimum number of VCs (indicated by vcGroupCnfgLcasMinNoOfVCs) withinRange - Number of VCs in Norm state is higher than the minimum number of VCs indicated by vcGroupCnfgLcasMinNoOfVCs) but is lower than Number of VCs mapped allNorm - Number of VCs in Norm state equals number of mapped VCs. Enumeration: 'notApplicable': 1, 'belowMinNoOfVCs': 2, 'allNorm': 4, 'withinRange': 3.
             vcgGfpMuxCnfgTable 1.3.6.1.4.1.164.3.1.6.2.2.4.2 no-access
The Virtual Concatenation Group GFP Mux configuration table.
                 vcgGfpMuxCnfgEntry 1.3.6.1.4.1.164.3.1.6.2.2.4.2.1 no-access
An entry in the Virtual Concatenation Group GFP Mux configuration table.
                     vcgGfpMuxCnfgIdx 1.3.6.1.4.1.164.3.1.6.2.2.4.2.1.1 integer32 no-access
This object indicates the Index of the configuration being accessed. Index of 255 relates to the Temporary (Scratch) coninguration. For products that support several configurations, Set can be performed only to the Temporary Config (=255).
                     vcgGfpMuxCnfgMuxNumber 1.3.6.1.4.1.164.3.1.6.2.2.4.2.1.2 integer32 no-access
Virtual Concatenation Group GFP Mux Number. For FCD=155 up to 4 GFP muxes can be created.
                     vcgGfpMuxCnfgRowStatus 1.3.6.1.4.1.164.3.1.6.2.2.4.2.1.3 rowstatus read-only
Creation/Deletion of rows in the table.
                     vcgGfpMuxCnfgMuxName 1.3.6.1.4.1.164.3.1.6.2.2.4.2.1.4 snmpadminstring read-only
Virtual Concatenation Group, GFP Mux name.
                     vcgGfpMuxCnfgPrimeGroup 1.3.6.1.4.1.164.3.1.6.2.2.4.2.1.5 integer32 read-only
Index of Virtual Concatenation Group used as Primary for the GFP mux created for FCD 155 up to 8 Virtual Concatenation Group are defined: 1 -> Virtual Concatenation Group 1 2 -> Virtual Concatenation Group 2 3 -> Virtual Concatenation Group 3 4 -> Virtual Concatenation Group 4 5 -> Virtual Concatenation Group 5 6 -> Virtual Concatenation Group 6 7 -> Virtual Concatenation Group 7 8 -> Virtual Concatenation Group 8
                     vcgGfpMuxCnfgGrpBwAlloc 1.3.6.1.4.1.164.3.1.6.2.2.4.2.1.6 octet string read-only
This object indicates the allocated bandwidth (BW) to each Virtual Concatenation Group (VCG). Each nibble indicates BW percentage, in 12.5% steps, assigned to a group. For FCD-155, there may be 4 or 8 VCGs. When only 4 VCG exists, only two octets are used. In current GFP Mux,one VCG is identified as primary group by vcGfpMuxConfPrimeGroup. Other VCGs may be secondaries. VCG with allocated BW value of zero does not belong to the GFPmux defined by GFP Mux number. ---------------------------------------- | Octet 0 | Octet 1 | |Nibble 4 | Nibble 3| Nibble 2| Nibble 1| MSB | 7 6 5 4 | 3 2 1 0 | 7 6 5 4 | 3 2 1 0 | +-------------------+-------------------+ VCG1 VCG2 VCG 3 VCG4 ---------------------------------------- | Octet 3 | Octet 4 | |Nibble 4 | Nibble 3| Nibble 2| Nibble 1| | 7 6 5 4 | 3 2 1 0 | 7 6 5 4 | 3 2 1 0 | LSB +-------------------+-------------------+ VCG5 VCG6 VCG 7 VCG8 Nibble value - BW Percentage (0...7) (0 ...87.5%) 1 0001 12.5 % 2 0010 25% 3 0011 37.5 ..... 7 0111 87.5% at least one nibble must be greater that zero. Sum of alloacted BW must be 100%. Primary VCG BW must be greater than zero.
         virtualIfConfiguration 1.3.6.1.4.1.164.3.1.6.2.2.5
             virtualIfGenTable 1.3.6.1.4.1.164.3.1.6.2.2.5.1 no-access
Sonet/SDH general port configuration table.
                 virtualIfGenEntry 1.3.6.1.4.1.164.3.1.6.2.2.5.1.1 no-access
An entry in the Sonet/SDH general port configuration table.
                     virtualIfGenCnfgIdx 1.3.6.1.4.1.164.3.1.6.2.2.5.1.1.1 integer32 read-only
This object indicates the Idx of the Config being accessed. Idx of 255 relates to the Temporary (Scratch) Config. For products that support several configurations, Set can be performed only to the Temporary Config (=255).
                     virtualIfGenIdx 1.3.6.1.4.1.164.3.1.6.2.2.5.1.1.2 integer32 read-only
This object indicates a unique port or interface number. For numbering, see product's spec. For some products, the numbering can equal ifIndex.
                     virtualIfGenFrameFormat 1.3.6.1.4.1.164.3.1.6.2.2.5.1.1.3 integer read-write
The frame format. fcsEnabe = Frame will be sent with the FCS bits. fcsDisable = Frame will be sent without the FCS bits . Enumeration: 'notApplicable': 1, 'fcsEnable': 2, 'fcsDisable': 3.
     prtSonetXConnect 1.3.6.1.4.1.164.3.1.6.2.3
         prtSonetXConnectTable 1.3.6.1.4.1.164.3.1.6.2.3.1 no-access
The write operation into the Table's Objects is valid only for the TmpCnfg entry (Scratch).
             prtSonetXConnectEntry 1.3.6.1.4.1.164.3.1.6.2.3.1.1 no-access
An entry in table.
                 prtSonetXConnectCnfgIdx 1.3.6.1.4.1.164.3.1.6.2.3.1.1.1 integer32 read-only
This object indicates the Idx of the Config being accessed. Idx of 255 relates to the Temporary (Scratch) Config. For products that support several configurations, Set can be performed only to the Temporary Config (=255).
                 prtSonetXConnectPrtIdx 1.3.6.1.4.1.164.3.1.6.2.3.1.1.2 integer32 read-only
This object indicates a unique port or interface number. For port numbering, see product's spec. For some products, the numbering can equal ifIndex.
                 prtSonetXConnectConPrtIdx 1.3.6.1.4.1.164.3.1.6.2.3.1.1.3 integer32 read-only
This object indicates the connected port. For port numbering, see product's spec. For some products, the numbering can equal ifIndex. notApplicable - will be indicated as 255.
                 prtSonetXConnectAUGIdx 1.3.6.1.4.1.164.3.1.6.2.3.1.1.4 integer32 read-only
This object indicates an AUG (Administrative Unit Group) within STM-N. The valid AUGs values are: 1 for STM-1 1...4 for STM-4, 1..16 for STM-16 and 1..64 for STM-64 (STM-64) 255 designates NA.
                 prtSonetXConnectTUG3Idx 1.3.6.1.4.1.164.3.1.6.2.3.1.1.5 integer32 read-only
This object indicates a TUG-3 (Tributary Unit Group 3) within VC-4. The valid TUG3s are values are 1..3. and 255 which designates NA
                 prtSonetXConnectTUG2Idx 1.3.6.1.4.1.164.3.1.6.2.3.1.1.6 integer32 read-only
This object indicates a TUG2 (Tributary Unit Group 2 ) within VC-3. The valid TUG2's values are 1..7 and 255 which designates NA
                 prtSonetXConnectTUnIdx 1.3.6.1.4.1.164.3.1.6.2.3.1.1.7 integer32 read-only
This object indicates a TUn within TUG-2 or TUG-3 (Tributary Unit n, where n is 2, 12 or 11 within TUG-2, or 3 within TUG-3) valid values are 1 for TU-2 1 for TU-3 1..4 for TU-11 1..3 for TU-12 255 designates NA
                 prtSonetXConnectRowStatus 1.3.6.1.4.1.164.3.1.6.2.3.1.1.8 rowstatus read-only
Creation/Deletion of rows in the table.
                 prtSonetXConnectDirection 1.3.6.1.4.1.164.3.1.6.2.3.1.1.9 integer read-only
TU direction of connection. rx=Drop tx=Add both = Add & Drop Enumeration: 'notApplicable': 1, 'rx': 2, 'tx': 3, 'both': 4.
                 prtSonetXConnectTuNumber 1.3.6.1.4.1.164.3.1.6.2.3.1.1.10 integer read-only
This object indicates which TU is used in prtSonetXConnectTUnIdx Enumeration: 'tu12': 5, 'notApplicable': 1, 'tu2': 2, 'tu3': 3, 'tu11': 4.
     prtSonetStatus 1.3.6.1.4.1.164.3.1.6.2.4
         prtSonetVcStatTable 1.3.6.1.4.1.164.3.1.6.2.4.1 no-access
VC Status Table
             prtSonetVcStatEntry 1.3.6.1.4.1.164.3.1.6.2.4.1.1 no-access
An entry in the VC status Table.
                 prtSonetVcRxJPathTrace 1.3.6.1.4.1.164.3.1.6.2.4.1.1.1 snmpadminstring read-only
Jy Path Trace value received from network. y=1, 2: J1 - for VC-4 layer J2 - for VC-12 layer.
                 prtSonetVcRxSignalLabel 1.3.6.1.4.1.164.3.1.6.2.4.1.1.2 octet string read-only
Signal Label received from network. For VC-3: The SONET standard defines the C2 byte as the path signal label. The purpose of this byte is to communicate the payload type being encapsulated by the SONET Framing OverHead. It allows a single interface to transport multiple payload types simultaneously. For VC-12, VT-1.5: VT path overhead V5 byte allocates bits 5-7 for VT Path Signal Label, to indicate the content of the VT SPE. 000 - Unequipped 001 - Equipped - non specific payload 010 - Asynchronous Mapping 011 - Bit Synchronous Mapping (no longer used) 100 - Byte Synchronous Mapping (TU11 or TU12) 101 - Extended Signal Label for Virtual Concatenation Applications (FCD-155 Default) 110 - Test Signal (0.181) (ITU) 111 - VC AIS (ITU)
                 prtSonetVcLcasSourceState 1.3.6.1.4.1.164.3.1.6.2.4.1.1.3 integer read-only
Fixed - This is an indication that this end uses fixed bandwidth (non-LCAS mode) Add - This member is about to be added to the group Norm - Normal transmission. EOS - End of Sequence indication and Normal transmission. Idle - IDLE This member is not part of the group or about to be removed. Dnu - Do Not use - Do Not Use (the payload) the Sk side reported FAIL status. Enumeration: 'dn': 7, 'idle': 6, 'eos': 5, 'notApplicable': 1, 'add': 3, 'fixed': 2, 'norm': 4.
                 prtSonetVcLcasSinkState 1.3.6.1.4.1.164.3.1.6.2.4.1.1.4 integer read-only
Fixed - This is an indication that this end uses fixed bandwidth (non-LCAS mode) Add - This member is about to be added to the group Norm - Normal transmission. EOS - End of Sequence indication and Normal transmission. Idle - IDLE This member is not part of the group or about to be removed. Dnu - Do Not use - Do Not Use (the payload) the Sk side reported FAIL status. Enumeration: 'dn': 7, 'idle': 6, 'eos': 5, 'notApplicable': 1, 'add': 3, 'fixed': 2, 'norm': 4.