QWESCOM-MIB: View SNMP OID List / Download MIB

VENDOR: QWES.COM INCORPORATED


 Home MIB: QWESCOM-MIB
Download as:   

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 qwescom 1.3.6.1.4.1.3662
           oemTree 1.3.6.1.4.1.3662.3662
                     oem 1.3.6.1.4.1.3662.3662.3662
                               qproprietaryMib2 1.3.6.1.4.1.3662.3662.3662.1
                                   qsnmp 1.3.6.1.4.1.3662.3662.3662.1.11
                                         qsnmpCommunityTable 1.3.6.1.4.1.3662.3662.3662.1.11.1 no-access
A list of SNMP Community entries. The maximum number of SNMP Communities are five.
                                             qsnmpCommunityEntry 1.3.6.1.4.1.3662.3662.3662.1.11.1.1 no-access
One entry in the table.
                                                 qsnmpCommunityIndex 1.3.6.1.4.1.3662.3662.3662.1.11.1.1.1 integer read-only
A unique value which identifies each SNMP Community.
                                                 qsnmpCommunityRights 1.3.6.1.4.1.3662.3662.3662.1.11.1.1.2 integer read-only
The first and third qsnmpCommunityIndex have read-write permission while the others have read-only privilege. Values 0 = ReadOnly, and 1 = ReadWrite Enumeration: 'readwrite': 1, 'readonly': 0.
                                                 qsnmpCommunityName 1.3.6.1.4.1.3662.3662.3662.1.11.1.1.3 displaystring read-write
The SNMP Community Name used to access the unit with the associated permission from the qsnmpCommunityRights.
                                         qsnmpNMSTable 1.3.6.1.4.1.3662.3662.3662.1.11.2 no-access
A list of SNMP Network Management System (NMS) entries.
                                             qsnmpNMSEntry 1.3.6.1.4.1.3662.3662.3662.1.11.2.1 no-access
One entry in the table.
                                                 qsnmpNMSIndex 1.3.6.1.4.1.3662.3662.3662.1.11.2.1.1 integer read-only
A unique value which identifies each NMS.
                                                 qsnmpNMSIpAddress 1.3.6.1.4.1.3662.3662.3662.1.11.2.1.2 ipaddress read-write
The IP Address of a Network Management System, which is allowed to access MIB variables.
                                         qsnmpTrapTable 1.3.6.1.4.1.3662.3662.3662.1.11.3 no-access
A list of IP Address entries associated with traps.
                                             qsnmpTrapEntry 1.3.6.1.4.1.3662.3662.3662.1.11.3.1 no-access
One entry in the table.
                                                 qsnmpTrapIndex 1.3.6.1.4.1.3662.3662.3662.1.11.3.1.1 integer read-only
A unique value which identifies each IP Address.
                                                 qsnmpTrapIpAddress 1.3.6.1.4.1.3662.3662.3662.1.11.3.1.2 ipaddress read-write
The IP Address of an IP entity, which is allowed to receive SNMP Trap events.
                                         qsnmpForwardTrap 1.3.6.1.4.1.3662.3662.3662.1.11.4 integer read-write
The flag which enables(1)/disables(2) SNMP Trap events to be transmitted. Enumeration: 'enable': 1, 'disable': 2.
                               qproducts 1.3.6.1.4.1.3662.3662.3662.2
                               qslots 1.3.6.1.4.1.3662.3662.3662.3
                               qFlowClass 1.3.6.1.4.1.3662.3662.3662.4
                                   qClassDefinitionMaxEntries 1.3.6.1.4.1.3662.3662.3662.4.1 counter read-only
The number of Class Definition entries.
                                   qClassDefinitionTable 1.3.6.1.4.1.3662.3662.3662.4.2 no-access
A list of Class Definition entries. The number of entries is given by the value of qClassDefinitionMaxEntries.
                                       qClassDefinitionEntry 1.3.6.1.4.1.3662.3662.3662.4.2.1 no-access
One entry in the table.
                                           qClassDefinitionIndex 1.3.6.1.4.1.3662.3662.3662.4.2.1.1 integer read-write
A unique value for each class definition. Values 0 and 1 are reserved for internal use.
                                           qClassDefinitionAlias 1.3.6.1.4.1.3662.3662.3662.4.2.1.2 displaystring read-write
A textual string containing user defined information about the Class Definition.
                                           qClassDefinitionParentClassID 1.3.6.1.4.1.3662.3662.3662.4.2.1.3 integer read-write
The qClassDefinitionIndex value of the parent for this Class Definition.
                                           qClassDefinitionFlowType 1.3.6.1.4.1.3662.3662.3662.4.2.1.4 integer read-write
The type of Class Definition being created. INVALID causes the current Class Definition Entry to be removed. Enumeration: 'dsingres': 2, 'dsegress': 3, 'dsnode': 4, 'invalid': 5, 'normal': 1.
                                           qClassDefinitionSourceIPMask 1.3.6.1.4.1.3662.3662.3662.4.2.1.5 ipaddress read-write
The IP address mask for the source.
                                           qClassDefinitionSourceIPLowerBound 1.3.6.1.4.1.3662.3662.3662.4.2.1.6 ipaddress read-write
The first source IP address which matches the class (after masking).
                                           qClassDefinitionSourceIPUpperBound 1.3.6.1.4.1.3662.3662.3662.4.2.1.7 ipaddress read-write
The last source IP address which matches the class (after masking).
                                           qClassDefinitionDestIPMask 1.3.6.1.4.1.3662.3662.3662.4.2.1.8 ipaddress read-write
The IP address mask for the destination.
                                           qClassDefinitionDestIPLowerBound 1.3.6.1.4.1.3662.3662.3662.4.2.1.9 ipaddress read-write
The first destination IP address which matches the class (after masking).
                                           qClassDefinitionDestIPUpperBound 1.3.6.1.4.1.3662.3662.3662.4.2.1.10 ipaddress read-write
The last destination IP address which matches the class (after masking).
                                           qClassDefinitionDSMask 1.3.6.1.4.1.3662.3662.3662.4.2.1.11 integer read-write
The DS/TOS byte mask value.
                                           qClassDefinitionDSLowerBound 1.3.6.1.4.1.3662.3662.3662.4.2.1.12 integer read-write
The first DS/TOS byte value which matches the class (after masking).
                                           qClassDefinitionDSUpperBound 1.3.6.1.4.1.3662.3662.3662.4.2.1.13 integer read-write
The last DS/TOS byte value which matches the class (after masking).
                                           qClassDefinitionWellKnownApplication 1.3.6.1.4.1.3662.3662.3662.4.2.1.14 integer read-write
The type of application to match. Enumeration: 'ciscosys': 42, 'autodesk': 57, 'tftp': 22, 'ciscotna': 41, 'smtp': 10, 'bootp': 21, 'rip': 5, 'echo': 3, 'rpc': 33, 'daytime': 5, 'rap': 13, 'send': 46, 'ipx': 48, 'realaudio': 1, 'performancedata': 49, 'ftp': 8, 'uucp': 37, 'whois': 15, 'vlsi': 59, 'ibm': 58, 'xwindows': 61, 'hostname': 28, 'audiomail': 55, 'videomail': 56, 'unspecified': 0, 'msp': 7, 'authentication': 34, 'finger': 24, 'dns': 19, 'ldap': 50, 'msg': 11, 'npp': 27, 'rlp': 14, 'http': 25, 'sna': 31, 'kerberos': 26, 'telnet': 9, 'gopher': 23, 'pop3': 32, 'management': 45, 'isotsap': 29, 'audionews': 35, 'sql': 20, 'novell': 51, 'news': 44, 'doom': 53, 'remotemail': 17, 'netbios': 43, 'xns': 18, 'pwdgen': 39, 'quoteofday': 6, 'ciscofna': 40, 'remotetelnet': 30, 'sftp': 36, 'appletalk': 47, 'networktime': 38, 'time': 12, 'oracle': 60, 'discard': 4, 'login': 16, 'lotusnotes': 54, 'microsoft': 52, 'netmeeting': 2.
                                           qClassDefinitionProtocol 1.3.6.1.4.1.3662.3662.3662.4.2.1.15 integer read-write
The IP protocol which matches the class. Enumeration: 'arp': 5, 'pvp': 12, 'all': 0, 'isotp4': 10, 'udptcp': 1, 'rdp': 9, 'igrp': 17, 'egp': 7, 'udp': 2, 'tcp': 3, 'isoip': 13, 'nsfnetigp': 16, 'vines': 14, 'ipinip': 8, 'ttp': 15, 'idrp': 11, 'icmp': 4, 'ospfigp': 18, 'rsvp': 6.
                                           qClassDefinitionSourcePortLowerBound 1.3.6.1.4.1.3662.3662.3662.4.2.1.16 integer read-write
The first source UDP/TCP port which matches the class. Only valid if qClassDefinitionWellKnownApplication = UNSPECIFIED, and qClassDefinitionProtocol = (ALL, UDPTCP, UDP, or TCP).
                                           qClassDefinitionSourcePortUpperBound 1.3.6.1.4.1.3662.3662.3662.4.2.1.17 integer read-write
The last source UDP/TCP port which matches the class. Only valid if qClassDefinitionWellKnownApplication = UNSPECIFIED, and qClassDefinitionProtocol = (ALL, UDPTCP, UDP, or TCP).
                                           qClassDefinitionDestPortLowerBound 1.3.6.1.4.1.3662.3662.3662.4.2.1.18 integer read-write
The first dest UDP/TCP port which matches the class. Only valid if qClassDefinitionWellKnownApplication = UNSPECIFIED, and qClassDefinitionProtocol = (ALL, UDPTCP, UDP, or TCP).
                                           qClassDefinitionDestPortUpperBound 1.3.6.1.4.1.3662.3662.3662.4.2.1.19 integer read-write
The last dest UDP/TCP port which matches the class. Only valid if qClassDefinitionWellKnownApplication = UNSPECIFIED, and qClassDefinitionProtocol = (ALL, UDPTCP, UDP, or TCP).
                                           qClassDefinitionFlowAgingTime 1.3.6.1.4.1.3662.3662.3662.4.2.1.20 integer read-write
The number of seconds to use as the aging time for LIF related flow information.
                                   qPolicyDefinitionMaxEntries 1.3.6.1.4.1.3662.3662.3662.4.3 integer read-write
The number of Policy Definition entries.
                                   qPolicyDefinitionTable 1.3.6.1.4.1.3662.3662.3662.4.4 no-access
A list of Policy Definition entries. The number of entries is given by the value of qPolicyDefinitionMaxEntries.
                                       qPolicyDefinitionEntry 1.3.6.1.4.1.3662.3662.3662.4.4.1 no-access
                                           qPolicyDefinitionIndex 1.3.6.1.4.1.3662.3662.3662.4.4.1.1 integer read-write
A unique value for each policy definition. Values 0 and 1 are reserved for internal use.
                                           qPolicyDefinitionAlias 1.3.6.1.4.1.3662.3662.3662.4.4.1.2 displaystring read-write
A textual string containing user defined information about the Policy Definition.
                                           qPolicyDefinitionType 1.3.6.1.4.1.3662.3662.3662.4.4.1.3 integer read-write
The type of Policy Definition. DELETE causes the current definition to be removed. Enumeration: 'normal': 1, 'dsegress': 4, 'dsnode': 3, 'discard': 5, 'dsingress': 2, 'delete': 6.
                                           qPolicyDefinitionLP 1.3.6.1.4.1.3662.3662.3662.4.4.1.4 integer read-write
The logical interface this policy relates to.
                                           qPolicyDefinitionStartTime 1.3.6.1.4.1.3662.3662.3662.4.4.1.5 timedatestring read-write
The time of day this policy takes effect. NULL = always in effect.
                                           qPolicyDefinitionEndTime 1.3.6.1.4.1.3662.3662.3662.4.4.1.6 timedatestring read-write
The time of day this policy stops taking effect. NULL = always in effect.
                                           qPolicyDefinitionDayofWeek 1.3.6.1.4.1.3662.3662.3662.4.4.1.7 integer read-write
Bit flags which indicate the day of week. Bit 0 = Monday, 1 = Tuesday, 2 = Weds, 4 = Thurs, 8 = Fri, 16 = Sat, 32 = Sun, 64 = Holidays.
                                           qPolicyDefinitionPipeID 1.3.6.1.4.1.3662.3662.3662.4.4.1.8 integer read-write
The pipe definition this policy references.
                                           qPolicyDefinitionClassID 1.3.6.1.4.1.3662.3662.3662.4.4.1.9 integer read-write
The class definition this policy references.
                                           qPolicyDefinitionChannelized 1.3.6.1.4.1.3662.3662.3662.4.4.1.10 integer read-write
Bit flags indicating which Classing range is used to create unique channels. 0 = off, 1 = Source IP, 2 = Dest IP 4 = Source Port, 8 = Dest Port, 16 = Protocol, 32 = DS. The maximum number of channels (1-255) is set into the upper byte of this value. If a channel is selected, the default maximum is 16.
                                           qPolicyDefinitionOutboundDSValue 1.3.6.1.4.1.3662.3662.3662.4.4.1.11 integer read-write
The DS/TOS byte value to set in outbound PDUs. A value of 256 indicates no replacement.
                                           qPolicyDefinitionPriority 1.3.6.1.4.1.3662.3662.3662.4.4.1.12 integer read-write
The relative priority of this policy.
                                           qPolicyDefinitionEvent 1.3.6.1.4.1.3662.3662.3662.4.4.1.13 integer read-write
The type of event which causes this policy to come into effect. Enumeration: 'reducedbw': 3, 'static': 1, 'increasedbw': 4, 'time': 2.
                                   qPipeDefinitionMaxEntries 1.3.6.1.4.1.3662.3662.3662.4.5 counter read-only
The number of Pipe Definition entries.
                                   qPipeDefinitionTable 1.3.6.1.4.1.3662.3662.3662.4.6 no-access
A list of Pipe Definition entries. The number of entries is given by the value of qPipeDefinitionMaxEntries.
                                       qPipeDefinitionEntry 1.3.6.1.4.1.3662.3662.3662.4.6.1 no-access
                                           qPipeDefinitionIndex 1.3.6.1.4.1.3662.3662.3662.4.6.1.1 integer read-write
A unique value for each pipe definition. Values 0 and 1 are reserved for internal use.
                                           qPipeDefinitionAlias 1.3.6.1.4.1.3662.3662.3662.4.6.1.2 displaystring read-write
A textual string containing user defined information about the Pipe Definition.
                                           qPipeDefinitionType 1.3.6.1.4.1.3662.3662.3662.4.6.1.3 integer read-write
The type of Pipe Definition. DELETE causes the current definition to be removed. Enumeration: 'valid': 1, 'delete': 2.
                                           qPipeDefinitionCircuitID 1.3.6.1.4.1.3662.3662.3662.4.6.1.4 integer read-write
The WAN circuit this pipe relates to.
                                           qPipeDefinitionBandwidth 1.3.6.1.4.1.3662.3662.3662.4.6.1.5 integer read-write
The sustained bandwidth (bits/sec) of this pipe.
                                           qPipeDefinitionPeak 1.3.6.1.4.1.3662.3662.3662.4.6.1.6 integer read-only
Peak bandwidth of this pipe (bits/sec). Write-acces not supported in Release 1.
                                           qPipeDefinitionMBS 1.3.6.1.4.1.3662.3662.3662.4.6.1.7 integer read-only
The maximum burst size (bytes). Write-acces not supported in Release 1.
                                           qPipeDefinitionBufferAllocation 1.3.6.1.4.1.3662.3662.3662.4.6.1.8 integer read-write
The maximum queuing delay for this pipe.
                                           qPipeDefinitionDelay 1.3.6.1.4.1.3662.3662.3662.4.6.1.9 integer read-write
The maximum queuing delay for this pipe.
                                           qPipeDefinitionPhyIdx 1.3.6.1.4.1.3662.3662.3662.4.6.1.10 integer read-only
The physical index for the port.
                                           qPipeDefinitionPhyType 1.3.6.1.4.1.3662.3662.3662.4.6.1.11 integer read-only
The physical type for the port.
                                   qClassStatisticsTable 1.3.6.1.4.1.3662.3662.3662.4.7 no-access
A list of Class Statistics entries. The number of entries is given by the value of qClassDefinitionMaxEntries.
                                       qClassStatisticsEntry 1.3.6.1.4.1.3662.3662.3662.4.7.1 no-access
                                           qClassStatisticsIndex 1.3.6.1.4.1.3662.3662.3662.4.7.1.1 integer read-only
A unique value for each class stats entry. These match their corresponding Class Definition entry index.
                                           qClassStatisticsAlias 1.3.6.1.4.1.3662.3662.3662.4.7.1.2 displaystring read-only
A textual string containing user defined information about the Class Definition this stats entry relates to.
                                           qClassStatisticsTransmittedCount 1.3.6.1.4.1.3662.3662.3662.4.7.1.3 counter read-only
The number of bytes transmitted.
                                           qClassStatisticsDiscardCount 1.3.6.1.4.1.3662.3662.3662.4.7.1.4 counter read-only
The number of bytes discarded.
                                           qClassStatisticsFallbackCount 1.3.6.1.4.1.3662.3662.3662.4.7.1.5 counter read-only
The number of bytes transmitted on the 'all others' flow.
                               qatm 1.3.6.1.4.1.3662.3662.3662.5
                                   qatmCircuitTable 1.3.6.1.4.1.3662.3662.3662.5.1 no-access
A list of ATM circuit entries.
                                       qatmCircuitEntry 1.3.6.1.4.1.3662.3662.3662.5.1.1 no-access
One entry in the table.
                                           qatmCircuitId 1.3.6.1.4.1.3662.3662.3662.5.1.1.1 integer read-write
A unique value for this circuit definition.
                                           qatmCircuitAlias 1.3.6.1.4.1.3662.3662.3662.5.1.1.2 displaystring read-write
A unique alias for this circuit definition.
                                           qatmCircuitUNI 1.3.6.1.4.1.3662.3662.3662.5.1.1.3 integer read-write
The UNI interface number for this circuit.
                                           qatmCircuitLogicalInterface 1.3.6.1.4.1.3662.3662.3662.5.1.1.4 integer read-write
The LIF to assign this Circuit to. LIF 1 is reserved as an Ethernet identifier.
                                           qatmCircuitVpi 1.3.6.1.4.1.3662.3662.3662.5.1.1.5 integer read-write
The Virtual Path Identifier for this circuit.
                                           qatmCircuitFirstVci 1.3.6.1.4.1.3662.3662.3662.5.1.1.6 integer read-write
The Virtual Path Identifier for this circuit.
                                           qatmCircuitMode 1.3.6.1.4.1.3662.3662.3662.5.1.1.7 integer read-write
Determining the multiplexing mode for this connection. Enumeration: 'cell': 1, 'packet': 2.
                                           qatmCircuitStatus 1.3.6.1.4.1.3662.3662.3662.5.1.1.8 integer read-write
Setting a value of 1 adds/modifies an entry. Setting a value of 2 deletes a current entry. Enumeration: 'deltete': 2, 'valid': 1.
                                   qatmUniTable 1.3.6.1.4.1.3662.3662.3662.5.2 no-access
This table contains the QWES.com proprietary configuration parameters for an ATM local Interface (UNI).
                                       qatmUniEntry 1.3.6.1.4.1.3662.3662.3662.5.2.1 no-access
This list contains the QWES.com proprietary configuration parameters and state variables and is indexed by ifIndex values ATM interface.
                                           qatmSpanPort 1.3.6.1.4.1.3662.3662.3662.5.2.1.1 integer read-write
The SPAN port associates with this UNI.
                                           qatmUniName 1.3.6.1.4.1.3662.3662.3662.5.2.1.2 displaystring read-write
Unique Name for this UNI.
                                           qatmUniAlias 1.3.6.1.4.1.3662.3662.3662.5.2.1.3 displaystring read-write
A textual string containing user defined information about the UNI.
                                           qatmUniTrapStatus 1.3.6.1.4.1.3662.3662.3662.5.2.1.4 integer read-write
Indicates whether the Link Up/Link Down traps should be generated for this interface. Enumeration: 'disabled': 2, 'enabled': 1.
                                           qatmUniMaxQueueDelay 1.3.6.1.4.1.3662.3662.3662.5.2.1.5 integer read-write
xxxx
                                           qatmUniMinAllocBuffer 1.3.6.1.4.1.3662.3662.3662.5.2.1.6 integer read-write
xxxx
                                           qatmUniSharedBuffer 1.3.6.1.4.1.3662.3662.3662.5.2.1.7 integer read-write
xxxx
                                           qatmUniLinkBandwidth 1.3.6.1.4.1.3662.3662.3662.5.2.1.8 integer read-write
xxxx
                                           qatmUniLinkDelay 1.3.6.1.4.1.3662.3662.3662.5.2.1.9 integer read-write
xxxx
                                           qatmUniBandwidthGranularity 1.3.6.1.4.1.3662.3662.3662.5.2.1.10 integer read-write
xxxx
                                           qatmUniIlmiStatus 1.3.6.1.4.1.3662.3662.3662.5.2.1.11 integer read-write
Enable/Disable ILMI function for this UNI. Enumeration: 'disabled': 2, 'enabled': 1.
                                           qatmUniRowStatus 1.3.6.1.4.1.3662.3662.3662.5.2.1.12 rowstatus read-write
This object is used to create, delete or modify a row in this table.
                                   qatmVplTable 1.3.6.1.4.1.3662.3662.3662.5.3 no-access
The Virtual Path Link (VPL) table.
                                       qatmVplEntry 1.3.6.1.4.1.3662.3662.3662.5.3.1 no-access
One entry in the table.
                                           qatmVplMaxVcc 1.3.6.1.4.1.3662.3662.3662.5.3.1.1 integer read-write
The maximum number of VCCs initialized and active for this VPC. If the value is 0, then this VPC is only for management purposes and is not assigned to a scheduler.
                                           qatmVplLowestVci 1.3.6.1.4.1.3662.3662.3662.5.3.1.2 integer read-write
The start of a contiguous and increasing VCI range whose maximum is given by the maximum VCCs allowed.
                                           qatmVplMaxQueueDelay 1.3.6.1.4.1.3662.3662.3662.5.3.1.3 integer read-write
The maximum queueing delay in milliseconds (msec). Combining this value with the sustained rate will determine the maximum buffering allowed.
                                           qatmVplReservedBuffer 1.3.6.1.4.1.3662.3662.3662.5.3.1.4 integer read-write
The minimum amount of buffering that this VCC will be allocated to use.
                                           qatmVplBwGranularity 1.3.6.1.4.1.3662.3662.3662.5.3.1.5 integer read-write
The bandwidth granularity can be apply to this VPC.
                                           qatmVplMtu 1.3.6.1.4.1.3662.3662.3662.5.3.1.6 integer read-write
The MTU size can be apply to this VPC.
                                           qatmVplSharedBuffer 1.3.6.1.4.1.3662.3662.3662.5.3.1.7 integer read-write
The amount of buffering to be assigned to a VPC for sharing on a First In First Out (FIFO) basis between flows on this VPC.
                                   qatmVclTable 1.3.6.1.4.1.3662.3662.3662.5.4 no-access
The Virtual Channel Link (VCL) table.
                                       qatmVclEntry 1.3.6.1.4.1.3662.3662.3662.5.4.1 no-access
One entry in the table.
                                           qatmVclBwGranularity 1.3.6.1.4.1.3662.3662.3662.5.4.1.1 integer read-write
The bandwidth granularity can be apply to this VCC.
                                           qatmVclMaxSubChannels 1.3.6.1.4.1.3662.3662.3662.5.4.1.2 integer read-write
The maximum number of sub-channels supported on this Virtual Circuit.
                                           qatmVclMaxQueueDelay 1.3.6.1.4.1.3662.3662.3662.5.4.1.3 integer read-write
The maximum queueing delay in milliseconds (msec). Combining this value with the sustained rate will determine the maximum buffering allowed.
                                           qatmVclReservedBuffer 1.3.6.1.4.1.3662.3662.3662.5.4.1.4 integer read-write
The minimum reserved buffer in bytes that this VCC will be allocated to use.
                                           qatmVclSharedBuffer 1.3.6.1.4.1.3662.3662.3662.5.4.1.5 integer read-write
The amount of buffering to be assigned to a VCC for sharing on a First In First Out (FIFO) basis between flows on this VCC.
                                   qatmAal5Table 1.3.6.1.4.1.3662.3662.3662.5.5 no-access
The ATM Adaptation Layer 5 (Aal5) table.
                                       qatmAal5Entry 1.3.6.1.4.1.3662.3662.3662.5.5.1 no-access
One entry in the table.
                                           qatmAal5Uni 1.3.6.1.4.1.3662.3662.3662.5.5.1.1 integer read-write
The UNI port alias associates with this AAL5 interface.
                                           qatmAal5Aal5Name 1.3.6.1.4.1.3662.3662.3662.5.5.1.2 displaystring read-write
The AAL5 port name.
                                           qatmAal5Aal5Alias 1.3.6.1.4.1.3662.3662.3662.5.5.1.3 displaystring read-write
The alias for this AAL5 interface.
                                           qatmAal5AdminStatus 1.3.6.1.4.1.3662.3662.3662.5.5.1.4 integer read-write
The desired state for this interface. Enumeration: 'down': 2, 'up': 1.
                                           qatmAal5TrapStatus 1.3.6.1.4.1.3662.3662.3662.5.5.1.5 integer read-write
Indicates whether the Link Up/Link Down traps should be generated for this interface. Enumeration: 'disabled': 2, 'enabled': 1.
                                           qatmAal5MtuSize 1.3.6.1.4.1.3662.3662.3662.5.5.1.6 integer read-write
Set the largest PDU size for the AAL5 CPCS layer that cen be processed by the AAL5 entity.
                                           qatmAal5RowStatus 1.3.6.1.4.1.3662.3662.3662.5.5.1.7 integer read-write
Indicate the entry's status. (1..5 = add) 6 = delete.
                                   qatmTrafficDescriptorTable 1.3.6.1.4.1.3662.3662.3662.5.6 no-access
The TrafficDescriptor table.
                                       qatmTrafficDescriptorEntry 1.3.6.1.4.1.3662.3662.3662.5.6.1 no-access
One entry in the table.
                                           qatmTrafficDescriptorAlias 1.3.6.1.4.1.3662.3662.3662.5.6.1.1 displaystring read-write
The alias for this traffic descriptor.
                                   qatmTcTable 1.3.6.1.4.1.3662.3662.3662.5.7 no-access
The ATM TC table.
                                       qatmTcEntry 1.3.6.1.4.1.3662.3662.3662.5.7.1 no-access
One entry in the table.
                                           qatmTcCellSync 1.3.6.1.4.1.3662.3662.3662.5.7.1.1 integer read-only
The number of cell sync occurred on this Tc interface.
                                           qatmTcPortErrors 1.3.6.1.4.1.3662.3662.3662.5.7.1.2 integer read-only
The number of errors received on this Tc interface.
                                           qatmTcDmaErrors 1.3.6.1.4.1.3662.3662.3662.5.7.1.3 integer read-only
The number of DMA errors received on this Tc interface.
                                           qatmInvalidCells 1.3.6.1.4.1.3662.3662.3662.5.7.1.4 integer read-only
The number of invalid cellls received on this Tc interface.
                                           qatmCellsForInactiveVcc 1.3.6.1.4.1.3662.3662.3662.5.7.1.5 integer read-only
The number of cellls received for an inactive Vcc.
                                   qatmAal5VccStatsTable 1.3.6.1.4.1.3662.3662.3662.5.8 no-access
The ATM AAL5 Vcc Statistics table.
                                       qatmAal5VccStatsEntry 1.3.6.1.4.1.3662.3662.3662.5.8.1 no-access
One entry in the table.
                                           qatmAal5VccStatsInBytes 1.3.6.1.4.1.3662.3662.3662.5.8.1.1 integer read-only
The number of bytes received by this AAL5 interface.
                                           qatmAal5VccStatsOutBytes 1.3.6.1.4.1.3662.3662.3662.5.8.1.2 integer read-only
The number of bytes send by this AAL5 interface.
                                           qatmAal5VccStatsInSdus 1.3.6.1.4.1.3662.3662.3662.5.8.1.3 integer read-only
The number of SDUs received by this AAL5 interface.
                                           qatmAal5VccStatsOutSdus 1.3.6.1.4.1.3662.3662.3662.5.8.1.4 integer read-only
The number of SDUs send by this AAL5 interface.
                                           qatmAal5VccStatsErrsAndDiscards 1.3.6.1.4.1.3662.3662.3662.5.8.1.5 integer read-only
The number of error and discard packets received by this AAL5 interface.
                                           qatmAal5VccStatsLengthMismatchs 1.3.6.1.4.1.3662.3662.3662.5.8.1.6 integer read-only
The number of length mismatched packets received by this AAL5 interface.
                                           qatmAal5VccStatsUserAborts 1.3.6.1.4.1.3662.3662.3662.5.8.1.7 integer read-only
The number of packets aborted by users.
                                           qatmAal5VccStatsPoolDepleteds 1.3.6.1.4.1.3662.3662.3662.5.8.1.8 integer read-only
The number of packets aborted by users.
                               qcraftPort 1.3.6.1.4.1.3662.3662.3662.6
                                   qcpStatus 1.3.6.1.4.1.3662.3662.3662.6.1 integer read-only
Enumeration: 'down': 0, 'up': 1.
                                   qcpBaudRate 1.3.6.1.4.1.3662.3662.3662.6.2 integer read-write
The craft port command baud rate. Enumeration: 'br-115200': 9, 'br-2400': 1, 'br-57600': 8, 'br-19200': 5, 'br-4800': 2, 'br-1200': 0, 'br-38400': 7, 'br-28800': 6, 'br-14400': 4, 'br-9600': 3.
                                   qcpStopBitLength 1.3.6.1.4.1.3662.3662.3662.6.3 integer read-write
Enumeration: 'sb-1': 0, 'sb-2': 1.
                                   qcpParity 1.3.6.1.4.1.3662.3662.3662.6.4 integer read-write
Enumeration: 'even': 0, 'none': 2, 'odd': 1.
                                   qcpDataBits 1.3.6.1.4.1.3662.3662.3662.6.5 integer read-write
Enumeration: 'db-8': 1, 'db-7': 0.
                                   qcpCharsSent 1.3.6.1.4.1.3662.3662.3662.6.6 integer read-write
                                   qcpCharsReceived 1.3.6.1.4.1.3662.3662.3662.6.7 integer read-write
                               qeventGroup 1.3.6.1.4.1.3662.3662.3662.8
                                   qEventConfigTable 1.3.6.1.4.1.3662.3662.3662.8.1 no-access
A list of Event System Configuration Entries used for viewing / changing event options
                                       qEventConfigEntry 1.3.6.1.4.1.3662.3662.3662.8.1.1 no-access
One entry in the table
                                           qEventConfigIndex 1.3.6.1.4.1.3662.3662.3662.8.1.1.1 integer read-only
A unique value for each event that has been logged into one of the Event Logs
                                           qEventSeverityType 1.3.6.1.4.1.3662.3662.3662.8.1.1.2 integer read-only
A unique value which identifies each Event Type (Severity). Enumeration: 'standard-snmp': 4, 'mild': 3, 'critical': 2, 'debug': 6, 'fatal': 1, 'informational': 5.
                                           qLogFileType 1.3.6.1.4.1.3662.3662.3662.8.1.1.3 integer read-write
A unique value which allows the selection of the type of Log file to Log events into. Enumeration: 'alarm': 1, 'system': 2, 'none': 3.
                                           qLogOption 1.3.6.1.4.1.3662.3662.3662.8.1.1.4 integer read-write
A flag which enables(1)/disables(2) the logging feature of the Event Subsystem Enumeration: 'enable': 1, 'disable': 2.
                                           qDisplayOption 1.3.6.1.4.1.3662.3662.3662.8.1.1.5 integer read-write
A flag which enables(1)/disables(2) the display feature of the Event Subsystem Enumeration: 'enable': 1, 'disable': 2.
                                           qTrapOption 1.3.6.1.4.1.3662.3662.3662.8.1.1.6 integer read-write
A flag which enables(1)/disables(2) the Send Trap feature of the Event Subsystem Enumeration: 'enable': 1, 'disable': 2.
                                   qEventSystemTable 1.3.6.1.4.1.3662.3662.3662.8.2 no-access
A list of Event Log Display entries used for viewing the Logs.
                                       qEventSystemEntry 1.3.6.1.4.1.3662.3662.3662.8.2.1 no-access
One entry in the table
                                           qEventSystemIndex 1.3.6.1.4.1.3662.3662.3662.8.2.1.1 integer read-only
A unique value for each event that has been logged into one of the Event Logs
                                           qEventSystemDateTime 1.3.6.1.4.1.3662.3662.3662.8.2.1.2 displaystring read-only
The time of day an event occurs SNMP Community.
                                           qEventSystemType 1.3.6.1.4.1.3662.3662.3662.8.2.1.3 integer read-only
This value will be used to identify the Event Type to be displayed Enumeration: 'standard-snmp': 4, 'mild': 3, 'critical': 2, 'debug': 6, 'fatal': 1, 'informational': 5.
                                           qEventSystemSubSystem 1.3.6.1.4.1.3662.3662.3662.8.2.1.4 integer read-only
This value will be used to identify the Event Type to be displayed Enumeration: 'reset-subsystem': 14, 'ethernet-subsystem': 4, 'circuit-subsystem': 24, 'tcp-subsystem': 20, 'ping-subsystem': 18, 'ip-subsystem': 2, 'port-manager-subsystem': 11, 'clip-subsystem': 7, 'icmp-subsystem': 16, 'time-subsystem': 15, 'get-subsystem': 12, 'arp-subsystem': 25, 'telnet-subsystem': 6, 'upd-subsystem': 21, 'lif-subsystem': 23, 'flow-subsystem': 9, 'atm-subsystem': 3, 'flash-subsystem': 8, 'lp-subsystem': 22, 'snmp-subsystem': 19, 'igmp-subsystem': 17, 'tftp-subsystem': 5, 'general-subsystem': 1, 'oam-subsystem': 13, 'serial-subsystem': 10.
                                           qEventSystemID_Number 1.3.6.1.4.1.3662.3662.3662.8.2.1.5 integer read-only
A unique value for each event that has been logged into one of the Event Logs
                                           qEventSystemDescription 1.3.6.1.4.1.3662.3662.3662.8.2.1.6 displaystring read-only
A textual string containing the Description of the occurred Event.
                                   qEventAlarmTable 1.3.6.1.4.1.3662.3662.3662.8.3 no-access
A list of Event Log Display entries used for viewing the Logs.
                                       qEventAlarmEntry 1.3.6.1.4.1.3662.3662.3662.8.3.1 no-access
One entry in the table
                                           qEventAlarmIndex 1.3.6.1.4.1.3662.3662.3662.8.3.1.1 integer read-only
A unique value for each event that has been logged into one of the Event Logs
                                           qEventAlarmDateTime 1.3.6.1.4.1.3662.3662.3662.8.3.1.2 displaystring read-only
The time of day an event occurs SNMP Community.
                                           qEventAlarmType 1.3.6.1.4.1.3662.3662.3662.8.3.1.3 integer read-only
This value will be used to identify the Event Type to be displayed Enumeration: 'standard-snmp': 4, 'mild': 3, 'critical': 2, 'debug': 6, 'fatal': 1, 'informational': 5.
                                           qEventAlarmSubSystem 1.3.6.1.4.1.3662.3662.3662.8.3.1.4 integer read-only
This value will be used to identify the Event Type to be displayed Enumeration: 'reset-subsystem': 14, 'ethernet-subsystem': 4, 'circuit-subsystem': 24, 'tcp-subsystem': 20, 'ping-subsystem': 18, 'ip-subsystem': 2, 'port-manager-subsystem': 11, 'clip-subsystem': 7, 'icmp-subsystem': 16, 'time-subsystem': 15, 'get-subsystem': 12, 'arp-subsystem': 25, 'telnet-subsystem': 6, 'upd-subsystem': 21, 'lif-subsystem': 23, 'flow-subsystem': 9, 'atm-subsystem': 3, 'flash-subsystem': 8, 'lp-subsystem': 22, 'snmp-subsystem': 19, 'igmp-subsystem': 17, 'tftp-subsystem': 5, 'general-subsystem': 1, 'oam-subsystem': 13, 'serial-subsystem': 10.
                                           qEventAlarmID_Number 1.3.6.1.4.1.3662.3662.3662.8.3.1.5 integer read-only
A unique value for each event that has been logged into one of the Event Logs
                                           qEventAlarmDescription 1.3.6.1.4.1.3662.3662.3662.8.3.1.6 displaystring read-only
A textual string containing the Description of the occurred Event.
                               qextmib 1.3.6.1.4.1.3662.3662.3662.9
                                   qipExt 1.3.6.1.4.1.3662.3662.3662.9.1
                                       qipCircExtTable 1.3.6.1.4.1.3662.3662.3662.9.1.1 no-access
Table of IP circuit parameters
                                           qipCircExtEntry 1.3.6.1.4.1.3662.3662.3662.9.1.1.1 no-access
A circuits IP parameters
                                               qipCircExtIndex 1.3.6.1.4.1.3662.3662.3662.9.1.1.1.1 integer read-only
An index value which uniquely identifies this circuit within the router. This may or may not be related to the physical interface index.
                                               qipCircExtIfIndex 1.3.6.1.4.1.3662.3662.3662.9.1.1.1.2 integer read-only
An index value which uniquely identifies the local physical interface which this circuit uses. This value identifies the same interface identified by ifIndex in MIB-2.
                                               qipCircExtAdminState 1.3.6.1.4.1.3662.3662.3662.9.1.1.1.3 integer read-write
Enable or disable the operation of IP on the specified interface. Enumeration: 'disabled': 1, 'enabled': 2.
                                               qipCircExtOperState 1.3.6.1.4.1.3662.3662.3662.9.1.1.1.4 integer read-only
The operational state of the circuit. May or may not be the same as administrative state. Enumeration: 'on': 2, 'off': 1.
                                   qarpExt 1.3.6.1.4.1.3662.3662.3662.9.2
                                       qarpExtTtl 1.3.6.1.4.1.3662.3662.3662.9.2.1 integer read-write
The lifetime of an ARP entry within the router.
                                       qarpCircExtTable 1.3.6.1.4.1.3662.3662.3662.9.2.2 no-access
Table of ARP circuit parameters
                                           qarpCircExtEntry 1.3.6.1.4.1.3662.3662.3662.9.2.2.1 no-access
A circuits ARP parameters
                                               qarpCircExtIndex 1.3.6.1.4.1.3662.3662.3662.9.2.2.1.1 integer read-only
An index value which uniquely identifies this circuit within the router. This may or may not be related to the physical interface index.
                                               qarpCircExtIfIndex 1.3.6.1.4.1.3662.3662.3662.9.2.2.1.2 integer read-only
An index value which uniquely identifies the local physical interface which this circuit uses. This value identifies the same interface identified by ifIndex in MIB-2.
                                               qarpCircExtDoProxy 1.3.6.1.4.1.3662.3662.3662.9.2.2.1.3 integer read-write
Enable or disable ARP proxy responses on the specified interface. Enumeration: 'disabled': 1, 'enabled': 2.
                                               qarpCircExtDoResp 1.3.6.1.4.1.3662.3662.3662.9.2.2.1.4 integer read-only
Enable or disable the sending of ARP responses on specified circuit. Enumeration: 'disabled': 1, 'enabled': 2.
                                   qripExt 1.3.6.1.4.1.3662.3662.3662.9.3
                                       qripExtAdminState 1.3.6.1.4.1.3662.3662.3662.9.3.1 integer read-write
Enable or disable the operation of RIP on all interfaces. Enumeration: 'disabled': 1, 'enabled': 2.
                                       qripExtUpdateTime 1.3.6.1.4.1.3662.3662.3662.9.3.2 integer read-write
The time between transmission of RIP updates.
                                       qripCircExtTable 1.3.6.1.4.1.3662.3662.3662.9.3.3 no-access
Table of RIP circuit parameters
                                           qripCircExtEntry 1.3.6.1.4.1.3662.3662.3662.9.3.3.1 no-access
A circuits RIP parameters
                                               qripCircExtIndex 1.3.6.1.4.1.3662.3662.3662.9.3.3.1.1 integer read-only
An index value which uniquely identifies this circuit within the router. This may or may not be related to the physical interface index.
                                               qripCircExtIfIndex 1.3.6.1.4.1.3662.3662.3662.9.3.3.1.2 integer read-only
An index value which uniquely identifies the local physical interface which this circuit uses. This value identifies the same interface identified by ifIndex in MIB-2.
                                               qripCircExtTalk 1.3.6.1.4.1.3662.3662.3662.9.3.3.1.3 integer read-write
Enable or disable RIP transmission on the specified interface. Enumeration: 'disabled': 1, 'enabled': 2.
                                               qripCircExtListen 1.3.6.1.4.1.3662.3662.3662.9.3.3.1.4 integer read-write
Enable or disable RIP reception on the specified interface. Enumeration: 'disabled': 1, 'enabled': 2.
                                               qripCircExtPoison 1.3.6.1.4.1.3662.3662.3662.9.3.3.1.5 integer read-write
Enable or disable operation of poison reverse on the specified interface. If poison is disabled, split-horzon operation is enabled. Enumeration: 'disabled': 1, 'enabled': 2.
                               qmanufactRecord 1.3.6.1.4.1.3662.3662.3662.10
                                     qmrCheckSum 1.3.6.1.4.1.3662.3662.3662.10.1 counter read-only
The checksum of the manufacturing record.
                                     qmrBurnDate 1.3.6.1.4.1.3662.3662.3662.10.2 displaystring read-only
The Date the manufacturing record was burned into flash.
                                     qmrBurnTime 1.3.6.1.4.1.3662.3662.3662.10.3 displaystring read-only
The time the manufacturing record was burned into flash.
                                     qmrOemName 1.3.6.1.4.1.3662.3662.3662.10.4 displaystring read-only
The OEM Name of the unit.
                                     qmrOemID 1.3.6.1.4.1.3662.3662.3662.10.5 counter read-only
The OEM ID of the unit.
                                     qmrSerialNumber 1.3.6.1.4.1.3662.3662.3662.10.6 counter read-only
The serial number of the unit.
                                     qmrProductID 1.3.6.1.4.1.3662.3662.3662.10.7 integer read-only
The product ID of the unit. Enumeration: 'qwes-span': 1.
                                     qmrModelID 1.3.6.1.4.1.3662.3662.3662.10.8 integer read-only
The model ID of the unit. Enumeration: 'rev3': 2, 'prototype': 1.
                                     qmrMacAddress 1.3.6.1.4.1.3662.3662.3662.10.9 physaddress read-only
The MAC address of the unit.
                                     qmrRepairTable 1.3.6.1.4.1.3662.3662.3662.10.10 read-only
List of Repairs performed on the unit.
                                           qmrRepairEntry 1.3.6.1.4.1.3662.3662.3662.10.10.1 read-only
List of Repairs performed on the unit.
                                               qmrRepType 1.3.6.1.4.1.3662.3662.3662.10.10.1.1 integer read-only
The Type of the repair. Enumeration: 'eco': 2, 'repair': 1.
                                               qmrRepCode 1.3.6.1.4.1.3662.3662.3662.10.10.1.2 counter read-only
The code of the repair.
                                               qmrRepDate 1.3.6.1.4.1.3662.3662.3662.10.10.1.3 displaystring read-only
The date of the repair.
                                               qmrRepTime 1.3.6.1.4.1.3662.3662.3662.10.10.1.4 displaystring read-only
The time of the repair.
                               qethernet 1.3.6.1.4.1.3662.3662.3662.11
                                     qethernetCfgTable 1.3.6.1.4.1.3662.3662.3662.11.1 no-access
A list of Ethernet Configuration entries. The maximum number is based on the maximum interfaces.
                                         qethernetCfgEntry 1.3.6.1.4.1.3662.3662.3662.11.1.1 no-access
The Ethernet configuration information for each Ethernet interface.
                                             qethernetMacAddress 1.3.6.1.4.1.3662.3662.3662.11.1.1.1 physaddress read-write
The ethernet's physical address. An six byte hexidecimal identifier, which identifies the interface on the physical media.
                                             qethernetSpeedMode 1.3.6.1.4.1.3662.3662.3662.11.1.1.2 integer read-write
The Ethernet chipset has five available modes: (1) 100-MBPS-FULL-DUPLEX - sets ethernet chipset to 100 mbps, full duplex mode; (2) 10-MBPS-FULL-DUPLEX - sets ethernet chipset to 10 mbps, full duplex mode; (3) 100-MBPS-HALF-DUPLEX - sets ethernet chipset to 100 mbps, half duplex mode; (4) 10-MBPS-HALF-DUPLEX - sets ethernet chipset to 10 mbps, half duplex mode. Enumeration: 'full-duplex-10-mbps': 2, 'half-duplex-100-mbps': 3, 'half-duplex-10-mbps': 4, 'full-duplex-100-mbps': 1.
                                             qethernetEncapsulation 1.3.6.1.4.1.3662.3662.3662.11.1.1.3 integer read-write
The flag which sets the ethernets encapsulation type. 1 = Ethernet Version 2 encapsulation; 2 = IEEE 802.3 encapsulation. Enumeration: 'ieee8023encap': 2, 'etherv2encap': 1.
                                             qethernetAutoSense 1.3.6.1.4.1.3662.3662.3662.11.1.1.4 integer read-write
This object is used to negotiate the speed/duplex. The default is set to YES (1) - which negotiates from the configured speed/duplex (qethernetSpeedMode) or lower. When set to NO (2) - this forces the configured speed/duplex mode and will not establish a link unless the other end complies. Enumeration: 'yes': 1, 'no': 2.
                                             qethernetName 1.3.6.1.4.1.3662.3662.3662.11.1.1.5 displaystring read-write
This object is used to???
                                             qethernetCurrentSpeedMode 1.3.6.1.4.1.3662.3662.3662.11.1.1.6 integer read-only
The Ethernet chipset has four available modes or operation: (1) 100-MBPS-FULL-DUPLEX - sets ethernet chipset to 100 mbps, full duplex mode; (2) 10-MBPS-FULL-DUPLEX - sets ethernet chipset to 10 mbps, full duplex mode; (3) 100-MBPS-HALF-DUPLEX - sets ethernet chipset to 100 mbps, half duplex mode; (4) 10-MBPS-HALF-DUPLEX - sets ethernet chipset to 10 mbps, half duplex mode. This object will provide the current speed/duplex achieved or 'No Link'. Enumeration: 'full-duplex-10-mbps': 2, 'half-duplex-100-mbps': 3, 'half-duplex-10-mbps': 4, 'no-link': 5, 'full-duplex-100-mbps': 1.
                               qds1_e1 1.3.6.1.4.1.3662.3662.3662.12
                                     qds1AutoClockSourceSearching 1.3.6.1.4.1.3662.3662.3662.12.1 integer read-write
Selecting (1) YES will allow the Policy Point unit to automatically select the next available SPAN to provide clock if the Primary Clock Source fails. Selecting (2) NO will instruct the unit to ignore all clock source ports except the primary source clock port. Enumeration: 'yes': 1, 'no': 2.
                                     qds1PrimaryClockSource 1.3.6.1.4.1.3662.3662.3662.12.2 integer read-write
Identifies the unit's primary clock source. The first SPAN port - (2) SPAN-1; the second SPAN port - (3) SPAN-2; the third SPAN port - (4) SPAN-3; the fourth SPAN port - (5) SPAN-4; the fifth SPAN port - (6) SPAN-5; the sixth SPAN port - (7) SPAN-6. Enumeration: 'span-1': 2, 'span-3': 4, 'span-2': 3, 'span-5': 6, 'span-4': 5, 'span-6': 7.
                                     qds1PrimaryClockSourceAction 1.3.6.1.4.1.3662.3662.3662.12.3 integer read-write
Instructs the Span unit to (1) USE-CURRENT-SOURCE - stay with the current source clock, or (2) RETURN-TO-PRIMARY-SOURCE - restore the clock to the primary clock source. Enumeration: 'restore-to-primary-source': 2, 'use-current-source': 1.
                                     qds1SpanCfgTable 1.3.6.1.4.1.3662.3662.3662.12.4 no-access
A list of Span Configuration entries. The maximum number is based on the maximum interfaces.
                                         qds1SpanCfgEntry 1.3.6.1.4.1.3662.3662.3662.12.4.1 no-access
The DS1/E1 configuration information for each DS1/E1 interface.
                                             qds1LineCfgIndex 1.3.6.1.4.1.3662.3662.3662.12.4.1.1 integer read-only
A unique value which identifies a DS1/E1 interface. This value 'should' be made equal to the ifIndex, however, this may not be the case, but will have an internal association with the ifEntry.
                                             qds1LineBuildOut 1.3.6.1.4.1.3662.3662.3662.12.4.1.2 integer read-write
The Line Build Out specification for the DS1/E1 interface. NOTE: (1) represents not only the LINE-BUILD-OUT-133-FT, but also 0 db CSU. Enumeration: 'line-build-out-n15db': 7, 'line-build-out-399-ft': 3, 'line-build-out-655-ft': 5, 'line-build-out-n22-5db': 8, 'line-build-out-533-ft': 4, 'line-build-out-133-ft': 1, 'not-applicable': 9, 'line-build-out-266-ft': 2, 'line-build-out-n7-5db': 6.
                                             qds1ClockSourceEligibility 1.3.6.1.4.1.3662.3662.3662.12.4.1.3 integer read-write
Identifies whether the DS1/E1 interface is eligible to be the source clock or not. Enumeration: 'ineligible': 2, 'eligible': 1.
                                             qds1ClockMode 1.3.6.1.4.1.3662.3662.3662.12.4.1.4 integer read-write
Identifies the clock's mode of operation. Setting the clock mode to (1) will allow the interface to act as the slave to the network clock, and setting the mode to (2) will allow the unit's interface to provide the master clock. Enumeration: 'slavetonetwork': 1, 'providemasterclock': 2.
                                             qds1PerformanceMonitor 1.3.6.1.4.1.3662.3662.3662.12.4.1.5 integer read-write
Indicates whether or not performance monitoring will be transmitted on this interface. ENABLE (1) will transmit the performance report according to the ANSI T1.403-1995 standard. The performance report contains performance information for each of the four previous one-second intervals. Enumeration: 'enable': 1, 'disable': 2.
                                             qds1Scrambler 1.3.6.1.4.1.3662.3662.3662.12.4.1.6 integer read-write
Indicates whether or not scrambling of data is being generated on this interface. ENABLE (1) will transmit the scrambled data according to the ITU-T 0.191 Recommendation; DISABLE (2) will not scramble the data. NOTE: A T1 interface will NOT support scrambling, and therefore will be DISABLED. Enumeration: 'enable': 1, 'disable': 2.
                                     qds1SpanLoopBackCmdTable 1.3.6.1.4.1.3662.3662.3662.12.5 no-access
A list of Span Loopback Configuration entries. The maximum number is based on the maximum DS1/E1 interfaces.
                                         qds1SpanLoopBackCmdEntry 1.3.6.1.4.1.3662.3662.3662.12.5.1 no-access
The DS1/E1 loopback configuration information for each DS1/E1 interface.
                                             qds1LineLoopbackIndex 1.3.6.1.4.1.3662.3662.3662.12.5.1.1 integer read-only
A unique value which identifies DS1/E1 interface. This value should be made equal to the ifIndex.
                                             qds1LoopbackCommand 1.3.6.1.4.1.3662.3662.3662.12.5.1.2 integer read-write
This object is used to (1) ACTIVATE the configured loopback on the selected interface (qds1LineIndex) of the specified entity. If the dsx1OtherLoop (4) has been configured (see rfc2495 - dsx1LoopbackConfig), the supported loopback is the Local Port Loopback (LPL). The Local Port Loopback is used to validate the ability to send and receive data to the local DS1/E1 interface. LPL will use OAM flow to verify data transfer. Normal OAM flows are discontinued and an F4 OAM segment flow is automatically started on VPI=0, VCI=3 with a repeat timer of 1 second. When the loopback is set to (2) DEACTIVATE or comes to completion, the previous OAM configuration flows are restored. Enumeration: 'deactivate': 2, 'activate': 1.
                                             qds1LoopbackDuration 1.3.6.1.4.1.3662.3662.3662.12.5.1.3 integer read-write
The value indicates the duration (in SECONDS) that the Loopback will be in process.
                                     qds1SpanLoopBackStatsTable 1.3.6.1.4.1.3662.3662.3662.12.6 no-access
A list of Span Loopback Statistics for each entries. The maximum number is based on the maximum DS1/E1 interfaces.
                                         qds1SpanLoopBackStatsEntry 1.3.6.1.4.1.3662.3662.3662.12.6.1 no-access
The DS1/E1 loopback statistics information foreach DS1/E1 interface.
                                             qds1LineLoopbackStatIndex 1.3.6.1.4.1.3662.3662.3662.12.6.1.1 integer read-only
A unique value which identifies DS1/E1 interface. This value should be made equal to the ifIndex.
                                             qds1OamSegmentSent 1.3.6.1.4.1.3662.3662.3662.12.6.1.2 counter read-only
The total number of segment OAM messages transmitted on the DS1/E1 interface in question for the duration of the test.
                                             qds1OamSegmentReceived 1.3.6.1.4.1.3662.3662.3662.12.6.1.3 counter read-only
The total number of segment OAM messages received on the DS1/E1 interface in question for the duration of the test.
                                             qds1OamSegmentFailures 1.3.6.1.4.1.3662.3662.3662.12.6.1.4 counter read-only
The total number of segment OAM messages timed out on the DS1/E1 interface in question for the duration of the test.
                                             qds10amRunnigTime 1.3.6.1.4.1.3662.3662.3662.12.6.1.5 counter read-only
This is running time for the loop back.
                               qconfigManager 1.3.6.1.4.1.3662.3662.3662.13
                                     qcmSystemFile 1.3.6.1.4.1.3662.3662.3662.13.1 displaystring read-write
The name of the configuration file to edit.
                                     qcmConfigMaxEntries 1.3.6.1.4.1.3662.3662.3662.13.2 counter read-only
The number of Configuration entries.
                                     qcmConfigTable 1.3.6.1.4.1.3662.3662.3662.13.3 no-access
A list of configuration file entries. The number of entries is given by the value of qcmConfigMaxEntries.
                                         qcmConfigEntry 1.3.6.1.4.1.3662.3662.3662.13.3.1 no-access
                                             qcmTableIndex 1.3.6.1.4.1.3662.3662.3662.13.3.1.1 integer read-write
A unique value for each config file.
                                             qcmCurrentConfig 1.3.6.1.4.1.3662.3662.3662.13.3.1.2 integer read-write
Flag that indicates if this record is the current operational configuration. Enumeration: 'yes': 1, 'no': 0.
                                             qcmActionOnConfig 1.3.6.1.4.1.3662.3662.3662.13.3.1.3 integer read-write
Operations that can be performed on the current table record. Enumeration: 'saveas': 5, 'none': 0, 'activatenow': 2, 'save': 4, 'activatelater': 3, 'delete': 1.
                                             qcmFileAlias 1.3.6.1.4.1.3662.3662.3662.13.3.1.4 displaystring read-write
The file alias name of the 'release' / 'configuration file' pair.
                                             qcmRelease 1.3.6.1.4.1.3662.3662.3662.13.3.1.5 displaystring read-write
The name of the release file (executable).
                                             qcmConfigFile 1.3.6.1.4.1.3662.3662.3662.13.3.1.6 displaystring read-write
The name of the configuration file.
                                             qcmBootSequence 1.3.6.1.4.1.3662.3662.3662.13.3.1.7 displaystring read-write
The boot sequence.
                                             qcmCreateDateTime 1.3.6.1.4.1.3662.3662.3662.13.3.1.8 displaystring read-write
The creation date and time of the configuration file.
                                             qcmOperSchedDateTime 1.3.6.1.4.1.3662.3662.3662.13.3.1.9 displaystring read-write
The date and time the configuration file became operational.
                                     qcmReleaseTable 1.3.6.1.4.1.3662.3662.3662.13.4 no-access
A list of Release file entries.
                                         qcmReleaseEntry 1.3.6.1.4.1.3662.3662.3662.13.4.1 no-access
                                             qcmReleaseIndex 1.3.6.1.4.1.3662.3662.3662.13.4.1.1 integer read-only
A unique value for each Release file.
                                             qcmReleaseName 1.3.6.1.4.1.3662.3662.3662.13.4.1.2 displaystring read-only
The name of a release file.
                                             qcmReleaseVersion 1.3.6.1.4.1.3662.3662.3662.13.4.1.3 integer read-only
The version of the release file.
                                     qcmConfigVerTable 1.3.6.1.4.1.3662.3662.3662.13.5 no-access
A list of Config file entries.
                                         qcmConfigVerEntry 1.3.6.1.4.1.3662.3662.3662.13.5.1 no-access
                                             qcmConfigVerIndex 1.3.6.1.4.1.3662.3662.3662.13.5.1.1 integer read-only
A unique value for each Config file.
                                             qcmConfigName 1.3.6.1.4.1.3662.3662.3662.13.5.1.2 displaystring read-only
The name of a Config file.
                                             qcmConfigVersion 1.3.6.1.4.1.3662.3662.3662.13.5.1.3 integer read-only
The version of the Config file.
                                             qcmConfigWorkWithMin 1.3.6.1.4.1.3662.3662.3662.13.5.1.4 integer read-only
The minimum version of a Release file the Config file is compatable with.
                                             qcmConfigWorkWithMax 1.3.6.1.4.1.3662.3662.3662.13.5.1.5 integer read-only
The maximum version of a Release file the Config file is compatable with.
                                     qcmWhichFile 1.3.6.1.4.1.3662.3662.3662.13.6 integer read-write
Which file to do SNMP GETs and SETS on. Enumeration: 'default': 3, 'new': 2, 'base': 1, 'operational': 0.
                                     qcmUserBaseCfgFile 1.3.6.1.4.1.3662.3662.3662.13.7 displaystring read-write
The name of the configuration file to edit.
                                     qcmUserNewCfgFile 1.3.6.1.4.1.3662.3662.3662.13.8 displaystring read-write
The name of the new configuration file.
                                     qcmUserFileAlias 1.3.6.1.4.1.3662.3662.3662.13.9 displaystring read-write
The file alias of the system file.
                                     qcmUserRelease 1.3.6.1.4.1.3662.3662.3662.13.10 displaystring read-write
The name of the release file.
                                     qcmUserBootSequence 1.3.6.1.4.1.3662.3662.3662.13.11 displaystring read-write
The boot sequence.
                                     qcmUserDateTime 1.3.6.1.4.1.3662.3662.3662.13.12 displaystring read-write
The date and time LDF is be scheduled.
                                     qcmStartConfig 1.3.6.1.4.1.3662.3662.3662.13.13 integer read-write
Start the configuration process. Enumeration: 'yes': 1, 'no': 0.
                                     qcmStopConfig 1.3.6.1.4.1.3662.3662.3662.13.14 integer read-write
Stop and Save the current configuration process. Enumeration: 'yes': 1, 'no': 0.
                                     qcmStartViewConfig 1.3.6.1.4.1.3662.3662.3662.13.15 integer read-write
Start viewing a configuration file. Enumeration: 'yes': 1, 'no': 0.
                                     qcmStopViewConfig 1.3.6.1.4.1.3662.3662.3662.13.16 integer read-write
Stop viewing a configuration file. Enumeration: 'yes': 1, 'no': 0.
                                     qcmCancelConfig 1.3.6.1.4.1.3662.3662.3662.13.17 integer read-write
Cancel the current configuration process. Enumeration: 'yes': 1, 'no': 0.
                               qportManagement 1.3.6.1.4.1.3662.3662.3662.15
                                     qwesLpTable 1.3.6.1.4.1.3662.3662.3662.15.1 no-access
A list of Logical Port entries.
                                         qwesLpEntry 1.3.6.1.4.1.3662.3662.3662.15.1.1 no-access
One entry in the table.
                                             qwesLpName 1.3.6.1.4.1.3662.3662.3662.15.1.1.1 displaystring read-write
Display the name for the Logical Port.
                                             qwesLpAlias 1.3.6.1.4.1.3662.3662.3662.15.1.1.2 displaystring read-write
Enter an alias for the Logical Port Inteface name that has significant to your organization.
                                             qwesLpPhysicalInterface 1.3.6.1.4.1.3662.3662.3662.15.1.1.3 integer read-write
The physical port that this Logical Port associated.
                                             qwesLpDataLinkInterface 1.3.6.1.4.1.3662.3662.3662.15.1.1.4 integer read-write
The data link port that this Logical Port associated.
                                             qwesLpTrapStatus 1.3.6.1.4.1.3662.3662.3662.15.1.1.5 integer read-write
Indicates whether the Link Up/Link Down traps should be generated for this interface. Enumeration: 'yes': 1, 'no': 2.
                                             qwesLpAdminStatus 1.3.6.1.4.1.3662.3662.3662.15.1.1.6 integer read-write
The desired state of the interface set by management. Enumeration: 'down': 2, 'up': 1.
                                             qwesLpRowStatus 1.3.6.1.4.1.3662.3662.3662.15.1.1.7 rowstatus read-write
This object is used to create a new row or modify or delete an existing row in this table.
                                     qwesLifTable 1.3.6.1.4.1.3662.3662.3662.15.2 no-access
A list of Logical Interface entries.
                                         qwesLifEntry 1.3.6.1.4.1.3662.3662.3662.15.2.1 no-access
One entry in the table.
                                             qwesLifName 1.3.6.1.4.1.3662.3662.3662.15.2.1.1 displaystring read-write
The name for the Logical Port.
                                             qwesLifAlias 1.3.6.1.4.1.3662.3662.3662.15.2.1.2 displaystring read-write
The alias for the logical inteface name that has significant to your organization.
                                             qwesLifLpIndex 1.3.6.1.4.1.3662.3662.3662.15.2.1.3 integer read-write
The logical port (LP) number that this logical interface has an association with.
                                             qwesLifTrapStatus 1.3.6.1.4.1.3662.3662.3662.15.2.1.4 integer read-write
Indicates whether the Link Up/Link Down traps should be generated for this interface. Enumeration: 'yes': 1, 'no': 2.
                                             qwesLifAdminStatus 1.3.6.1.4.1.3662.3662.3662.15.2.1.5 integer read-write
The desired state of the interface set by management. Enumeration: 'down': 2, 'up': 1.
                                             qwesLifRowStatus 1.3.6.1.4.1.3662.3662.3662.15.2.1.6 rowstatus read-write
This object is used to create a new row or modify or delete an existing row in this table.
                                     qwesAtmArpTable 1.3.6.1.4.1.3662.3662.3662.15.3 no-access
A list of ATM ARP entries.
                                         qwesAtmArpEntry 1.3.6.1.4.1.3662.3662.3662.15.3.1 no-access
One entry in the table.
                                             qwesAtmArpLifIndex 1.3.6.1.4.1.3662.3662.3662.15.3.1.1 integer read-only
The logical interfacne (LIF) number that this ATM ARP entry has an association with.
                               qip 1.3.6.1.4.1.3662.3662.3662.16
                                     qipPortTable 1.3.6.1.4.1.3662.3662.3662.16.1 no-access
A list of IP Port entries.
                                         qipPortEntry 1.3.6.1.4.1.3662.3662.3662.16.1.1 no-access
One entry in the table.
                                             qIpLp 1.3.6.1.4.1.3662.3662.3662.16.1.1.1 integer read-write
The logical port number associated with this IP port.
                                             qIpAddr 1.3.6.1.4.1.3662.3662.3662.16.1.1.2 ipaddress read-write
The IP address of this IP Port.
                                             qIpSubnet 1.3.6.1.4.1.3662.3662.3662.16.1.1.3 ipaddress read-write
The IP subnet ddress of this IP Port.
                                             qIpMulticast 1.3.6.1.4.1.3662.3662.3662.16.1.1.4 integer read-write
Indicate whether or not multicast will be transmit on this interface. Enumeration: 'enable': 1, 'disable': 2.
                                             qIpRipStatus 1.3.6.1.4.1.3662.3662.3662.16.1.1.5 integer read-write
Indicate the RIP status. Enumeration: 'enable': 1, 'disable': 2.
                                             qIpArpTimeout 1.3.6.1.4.1.3662.3662.3662.16.1.1.6 integer read-write
The elapsed time of seconds before an ARP entry can be removed from the ARP table.
                                             qIpEncap 1.3.6.1.4.1.3662.3662.3662.16.1.1.7 integer read-write
Indicate the encapsulation type. Enumeration: 'hp': 2, 'standard': 1.
                                     qRipPortTable 1.3.6.1.4.1.3662.3662.3662.16.2 no-access
A list of IP Port entries.
                                         qRipPortEntry 1.3.6.1.4.1.3662.3662.3662.16.2.1 no-access
One entry in the table.
                                             qRipIpAddr 1.3.6.1.4.1.3662.3662.3662.16.2.1.1 ipaddress read-write
The IP address associated with this RIP Port.
                                             qMode 1.3.6.1.4.1.3662.3662.3662.16.2.1.2 integer read-write
Selects what type of rip authentication to be used on the selected port. Enumeration: 'none': 1, 'password': 2, 'md5': 3.
                                             qAuthentication 1.3.6.1.4.1.3662.3662.3662.16.2.1.3 displaystring read-write
This is the password to be used, when password type is selected for above authentication.
                                             qSplitHorizon 1.3.6.1.4.1.3662.3662.3662.16.2.1.4 integer read-write
. Enumeration: 'simple': 2, 'disable': 3, 'poisoned-reverse': 1.
                                             qAdvertiseStaticRoutes 1.3.6.1.4.1.3662.3662.3662.16.2.1.5 integer read-write
. Enumeration: 'yes': 1, 'no': 2.
                                             qAdvertiseIntf 1.3.6.1.4.1.3662.3662.3662.16.2.1.6 integer read-write
. Enumeration: 'yes': 1, 'no': 2.
                                             qBroadcastType 1.3.6.1.4.1.3662.3662.3662.16.2.1.7 integer read-write
. Enumeration: 'direct-with-ones': 2, 'local': 1, 'direct-with-zeros': 3.
                                             qHoldDownInterval 1.3.6.1.4.1.3662.3662.3662.16.2.1.8 integer read-write
.
                                             qUpdatesSend 1.3.6.1.4.1.3662.3662.3662.16.2.1.9 integer read-write
What the router sends on this interface. ripVersion1 implies sending RIP updates compliant with RFC 1058. rip1Compatible implies broadcasting RIP-2 updates using RFC 1058 route subsumption rules. ripVersion2 implies multicasting RIP-2 updates. ripV1Demand indicates the use of Demand RIP on a WAN interface under RIP Version 1 rules. ripV2Demand indicates the use of Demand RIP on a WAN interface under Version 2 rules. Enumeration: 'silent': 1, 'version-1-demand': 5, 'version-2': 4, 'rip-1-compatible': 3, 'version-1': 2, 'version-2-demand': 6.
                                             qUpdatesReceive 1.3.6.1.4.1.3662.3662.3662.16.2.1.10 integer read-write
This indicates which version of RIP updates are to be accepted. Note that rip2 and rip1OrRip2 implies reception of multicast packets. Enumeration: 'rip2': 2, 'rip1': 1, 'rip1-or-rip2': 3, 'none': 3.
                                             qDefaultRouteMetric 1.3.6.1.4.1.3662.3662.3662.16.2.1.11 integer read-write
This variable indicates the metric that is to be used for the default route entry in RIP updates originated on this interface. A value of zero indicates that no default route should be originated; in this case, a default route via another router may be propagated.
                                     qStaticArpTable 1.3.6.1.4.1.3662.3662.3662.16.3 no-access
A list of Static ARP entries.
                                         qStaticArpEntry 1.3.6.1.4.1.3662.3662.3662.16.3.1 no-access
One entry in the table.
                                             qStaticArpAddr 1.3.6.1.4.1.3662.3662.3662.16.3.1.1 ipaddress read-write
The IP address associated with this ARP entry.
                                             qLif 1.3.6.1.4.1.3662.3662.3662.16.3.1.2 integer read-write
The Logical Interface which uniquely identifies the local interface which this ARP entry can be reached.
                                             qPhysType 1.3.6.1.4.1.3662.3662.3662.16.3.1.3 integer read-write
The physical interface type associated with this ARP entry. Enumeration: 'ethernet': 1, 'atm-and-others': 2.
                                             qMacAddr 1.3.6.1.4.1.3662.3662.3662.16.3.1.4 physaddress read-write
The physical address associated with this ARP entry.
                                             qType 1.3.6.1.4.1.3662.3662.3662.16.3.1.5 integer read-write
Defines the ARP entry current status. Setting this entry to invalid(2) has the effect of invalidating the correspding entry in the ARP table. Setting this entry to valid(1) has the effect of installing the entry in the ARP table and make it active. Enumeration: 'delete': 3, 'add-activate': 1, 'add-not-activate': 2.
                                     qipTtl 1.3.6.1.4.1.3662.3662.3662.16.4 integer read-write
The time-to-live (in seconds) that a packet can live in the network.
                                     qipRoutePriority 1.3.6.1.4.1.3662.3662.3662.16.5 integer read-write
The route priority indicates routing entry precedence in the system. If RIP is selected, then all routing entries learned by RIP will have higher priority then other entries. Also, if STATIC is selected, then all routing entries which are static defined will have higher priority then other entries. Enumeration: 'static': 2, 'rip': 1.
                                     qipRipStatus 1.3.6.1.4.1.3662.3662.3662.16.6 integer read-write
The RIP system flag. Enumeration: 'enable': 1, 'disable': 2.
                                     qigmp 1.3.6.1.4.1.3662.3662.3662.16.7
                                         qigmpInMsgs 1.3.6.1.4.1.3662.3662.3662.16.7.1 integer read-only
Messages received by the system.
                                         qigmpOutMsgs 1.3.6.1.4.1.3662.3662.3662.16.7.2 integer read-only
Messages transmitted by the system.
                                         qigmpInErrors 1.3.6.1.4.1.3662.3662.3662.16.7.3 integer read-only
Error messages received by the system.
                                         qigmpInReports 1.3.6.1.4.1.3662.3662.3662.16.7.4 integer read-only
Reported messages received by the system.
                                         qigmpInQueries 1.3.6.1.4.1.3662.3662.3662.16.7.5 integer read-only
Querries received by the system.
                                         qigmpInUnknownType 1.3.6.1.4.1.3662.3662.3662.16.7.6 integer read-only
Unkown messages received by the system.
                                         qIgmpStaticTable 1.3.6.1.4.1.3662.3662.3662.16.7.7 no-access
A list of Static IGMP entries.
                                             qIgmpStaticEntry 1.3.6.1.4.1.3662.3662.3662.16.7.7.1 no-access
One entry in the table.
                                                 qIgmpStaticAddr 1.3.6.1.4.1.3662.3662.3662.16.7.7.1.1 ipaddress read-write
The IP address associated with this IGMP entry.
                                                 qIgmpLp 1.3.6.1.4.1.3662.3662.3662.16.7.7.1.2 integer read-write
The logical port number associated with this IP port.
                                                 qIgmpType 1.3.6.1.4.1.3662.3662.3662.16.7.7.1.3 integer read-write
Defines the IGMP entry current status. Setting this entry to invalid(2) has the effect of invalidating the correspding entry in the IGMP table. Setting this entry to valid(1) has the effect of installing the entry in the IGMP table and make it active. Enumeration: 'delete': 3, 'add-activate': 1, 'add-not-activate': 2.
                                         qIgmpGroupTable 1.3.6.1.4.1.3662.3662.3662.16.7.8 no-access
A list of IGMP Group entries.
                                             qIgmpGroupEntry 1.3.6.1.4.1.3662.3662.3662.16.7.8.1 no-access
One entry in the table.
                                                 qIgmpGroupAddr 1.3.6.1.4.1.3662.3662.3662.16.7.8.1.1 ipaddress read-only
The Multicast IP address associated with this IGMP entry.
                                                 qIgmpGroupLp 1.3.6.1.4.1.3662.3662.3662.16.7.8.1.2 integer read-only
The logical port number associated with this IP port.
                                                 qIgmpGroupMacAddr 1.3.6.1.4.1.3662.3662.3662.16.7.8.1.3 physaddress read-only
The Multicast MAC address associated with the qIgmpGroupLp.
                                                 qIgmpGroupInstallType 1.3.6.1.4.1.3662.3662.3662.16.7.8.1.4 integer read-only
Defines how the multicast IP was installed. Static(1) entries are specifically created by the user. Dynamic(2) entries are learned. All others are unknown. Enumeration: 'dynamic': 2, 'static': 1, 'unknown': 3.
                                     qarpInMsgs 1.3.6.1.4.1.3662.3662.3662.16.13 integer read-only
Arp messages received by the system.
                                     qarpOutMsgs 1.3.6.1.4.1.3662.3662.3662.16.14 integer read-only
Arp messages send by the system.
                                     qarpReqInMsg 1.3.6.1.4.1.3662.3662.3662.16.15 integer read-only
Request Arp messages received by the system.
                                     qarpReqOutMsgs 1.3.6.1.4.1.3662.3662.3662.16.16 integer read-only
Arp request messages send by the system.
                                     qarpRespInMsgs 1.3.6.1.4.1.3662.3662.3662.16.17 integer read-only
Arp reply messages received by the system.
                                     qarpRespOutMsgs 1.3.6.1.4.1.3662.3662.3662.16.18 integer read-only
Arp reply messages send by the system.
                                     qarpSendDiscards 1.3.6.1.4.1.3662.3662.3662.16.19 integer read-only
Arp discard messages send by the system.
                                     qarpSendTimeouts 1.3.6.1.4.1.3662.3662.3662.16.20 integer read-only
Arp timeout messages send by the system.
                                     qarpInResourceErrors 1.3.6.1.4.1.3662.3662.3662.16.21 integer read-only
Lack of resources Arp messages received by the system.
                                     qarpOutResourceErrors 1.3.6.1.4.1.3662.3662.3662.16.22 integer read-only
Lack of resources Arp messages send by the system.
                                     qRipStatsTable 1.3.6.1.4.1.3662.3662.3662.16.23 no-access
A list of Static ARP entries.
                                           qRipStatsEntry 1.3.6.1.4.1.3662.3662.3662.16.23.1 no-access
One entry in the table.
                                               qRipStatsAddr 1.3.6.1.4.1.3662.3662.3662.16.23.1.1 ipaddress no-access
Rip updates received by this system.
                                               qrip2IfStatsUpdatesReceives 1.3.6.1.4.1.3662.3662.3662.16.23.1.2 counter read-only
Rip updates received by this system.
                               qmanagementGroup 1.3.6.1.4.1.3662.3662.3662.17
                                     qSysTime 1.3.6.1.4.1.3662.3662.3662.17.1 displaystring read-write
System Time in GMT.
                                     qTftpType 1.3.6.1.4.1.3662.3662.3662.17.2 integer read-write
The file upload type. 1 = operational, 2 = config
                                     qTftpFileName 1.3.6.1.4.1.3662.3662.3662.17.3 displaystring read-write
Local filename to download into. If it exists, it WILL be overwritten.
                                     qTftpServerIpAddress 1.3.6.1.4.1.3662.3662.3662.17.4 ipaddress read-write
Server's IP address
                                     qTftpServerFileName 1.3.6.1.4.1.3662.3662.3662.17.5 displaystring read-write
Server's filename to get
                                     qTftpAdminStatus 1.3.6.1.4.1.3662.3662.3662.17.6 integer read-write
set to 1 to start TFTP download. 0 = ready for next download.
                                     qTftpOperStatus 1.3.6.1.4.1.3662.3662.3662.17.7 integer read-only
0=idle, 1=reading, 2=server IP error, 3=server filename error, 4 = done
                                     qTftpRxCount 1.3.6.1.4.1.3662.3662.3662.17.8 integer read-only
Number of blocks received
                                     qTimeZone 1.3.6.1.4.1.3662.3662.3662.17.9 integer read-write
Current time zone of the unit. Enumeration: 'beijing': 23, 'samoa': 2, 'brisbane': 25, 'new-caledonia': 26, 'pacific': 5, 'alaska': 4, 'mid-atlantic': 12, 'mountain': 7, 'auckland': 27, 'paris': 15, 'eniwetok': 1, 'abu-dhabi': 19, 'gmt': 14, 'israel': 16, 'arizona': 6, 'azores': 13, 'moscow': 17, 'buenos-aires': 11, 'bangkok': 22, 'atlantic': 9, 'tehran': 18, 'central': 8, 'tokyo': 24, 'islamabad': 20, 'hawaii': 3, 'almaty': 21, 'newfoundland': 10.
                               qOamGroup 1.3.6.1.4.1.3662.3662.3662.18
                                     qoamGroupConfigTable 1.3.6.1.4.1.3662.3662.3662.18.1 no-access
A list of OAM group Configurable Parameters entries.
                                         qoamGroupConfigEntry 1.3.6.1.4.1.3662.3662.3662.18.1.1 no-access
One entry in the table.
                                             qoamGroupConfigIndex 1.3.6.1.4.1.3662.3662.3662.18.1.1.1 integer read-only
The entry index of a particular group. Currently, there are 6 groups define: 1) All circuit 2) All Uni1 3) All Uni2, 4) All Uni3, 5) All Vpl, 6) All Vcl.
                                             qoamGroupConfigAlias 1.3.6.1.4.1.3662.3662.3662.18.1.1.2 displaystring read-only
Alias name of a specified circuit or for all configured UNIs, 1=end-to-end, 2=segment-to-segment, 3=both.
                                             qoamGroupConfigType 1.3.6.1.4.1.3662.3662.3662.18.1.1.3 integer read-write
The type of OAM to be generated. Enumeration: 'end-2-end': 2, 'both': 3, 'segment-2-segment': 1.
                                             qoamGroupConfigTransmitInterval 1.3.6.1.4.1.3662.3662.3662.18.1.1.4 integer read-write
The interval between OAM transmission in seconds.
                                             qoamGroupConfigS2SAlarmThreshold 1.3.6.1.4.1.3662.3662.3662.18.1.1.5 integer read-write
The number of timed out segment-to-segment OAM replies accumulated in sequence before an alarm is generated.
                                             qoamGroupConfigE2EAlarmThreshold 1.3.6.1.4.1.3662.3662.3662.18.1.1.6 integer read-write
The number of timed out end-to-end OAM replies accumulated in sequence before an alarm is generated.
                                             qoamGroupConfigStatus 1.3.6.1.4.1.3662.3662.3662.18.1.1.7 integer read-write
Enable/disable OAM operation. Enumeration: 'enable': 1, 'disable': 2.
                                     qoamCircuitConfigTable 1.3.6.1.4.1.3662.3662.3662.18.2 no-access
A list of OAM Configurable Parameters entries.
                                         qoamCircuitConfigEntry 1.3.6.1.4.1.3662.3662.3662.18.2.1 no-access
One entry in the table.
                                             qoamCircuitConfigIndex 1.3.6.1.4.1.3662.3662.3662.18.2.1.1 integer read-write
The index for the selected circuit.
                                             qoamCircuitConfigType 1.3.6.1.4.1.3662.3662.3662.18.2.1.2 integer read-write
The type of OAM to be generated. Enumeration: 'end-2-end': 2, 'both': 3, 'segment-2-segment': 1.
                                             qoamCircuitConfigTransmitInterval 1.3.6.1.4.1.3662.3662.3662.18.2.1.3 integer read-write
The interval between OAM transmission in seconds.
                                             qoamCircuitConfigS2SAlarmThreshold 1.3.6.1.4.1.3662.3662.3662.18.2.1.4 integer read-write
The number of timed out segment-to-segment OAM replies accumulated in sequence before an alarm is generated.
                                             qoamCircuitConfigE2EAlarmThreshold 1.3.6.1.4.1.3662.3662.3662.18.2.1.5 integer read-write
The number of timed out end-to-end OAM replies accumulated in sequence before an alarm is generated.
                                             qoamCircuitConfigStatus 1.3.6.1.4.1.3662.3662.3662.18.2.1.6 integer read-write
Enable/disable OAM operation. Enumeration: 'delete': 3, 'add-activate': 1, 'add-not-activate': 2.
                                     qoamGroupControlTable 1.3.6.1.4.1.3662.3662.3662.18.3 no-access
A list of OAM Control Parameters entries.
                                         qoamGroupControlEntry 1.3.6.1.4.1.3662.3662.3662.18.3.1 no-access
One entry in the table.
                                             qoamGroupControlIndex 1.3.6.1.4.1.3662.3662.3662.18.3.1.1 integer read-write
The index for the selected circuit.
                                             qoamGroupControlType 1.3.6.1.4.1.3662.3662.3662.18.3.1.2 integer read-write
The type of OAM to be generated, 1=end-to-end, 2=segment-to-segment, 3=both. Enumeration: 'end-2-end': 2, 'both': 3, 'segment-2-segment': 1.
                                             qoamGroupControlStatus 1.3.6.1.4.1.3662.3662.3662.18.3.1.3 integer read-write
Initiate or terminate OAM operation, 1=start and 2=stop Enumeration: 'start': 1, 'stop': 2, 'restore': 3.
                                     qoamCircuitControlTable 1.3.6.1.4.1.3662.3662.3662.18.4 no-access
A list of OAM Control Parameters entry.
                                         qoamCircuitControlEntry 1.3.6.1.4.1.3662.3662.3662.18.4.1 no-access
One entry in the table.
                                             qoamCircuitControlIndex 1.3.6.1.4.1.3662.3662.3662.18.4.1.1 integer read-write
The index for the selected circuit.
                                             qoamCircuitControlType 1.3.6.1.4.1.3662.3662.3662.18.4.1.2 integer read-write
The type of OAM to be generated, 1=end-to-end, 2=segment-to-segment, 3=both. Enumeration: 'end-2-end': 2, 'both': 3, 'segment-2-segment': 1.
                                             qoamCircuitControlStatus 1.3.6.1.4.1.3662.3662.3662.18.4.1.3 integer read-write
Initiate or terminate OAM operation, 1=start and 2=stop Enumeration: 'start': 1, 'stop': 2, 'restore': 3.
                                     qoamStatsTable 1.3.6.1.4.1.3662.3662.3662.18.5 no-access
A list of OAM statistics entries.
                                         qoamStatsEntry 1.3.6.1.4.1.3662.3662.3662.18.5.1 no-access
One entry in the table.
                                             qoamStatsCircuit 1.3.6.1.4.1.3662.3662.3662.18.5.1.1 integer read-only
The circuit id identifies the entry.
                                             qoamStatsVpi 1.3.6.1.4.1.3662.3662.3662.18.5.1.2 integer read-only
The first half of the VPI/VCI pairs associated with the circuit id.
                                             qoamStatsVci 1.3.6.1.4.1.3662.3662.3662.18.5.1.3 integer read-only
The second half of the VPI/VCI pairs associated with the circuit id.
                                             qoamStatsType 1.3.6.1.4.1.3662.3662.3662.18.5.1.4 integer read-only
The type of OAM. Enumeration: 'f4-segment': 1, 'f4-end': 2, 'f5-end': 4, 'f5-segment': 3.
                                             qoamStatsStatus 1.3.6.1.4.1.3662.3662.3662.18.5.1.5 integer read-only
The current operational status of OAM on this circuit. ON=OAMs being transmitted, OFF=OAMs not being transmitted. Enumeration: 'on': 1, 'off': 2.
                                             qoamRequestTx 1.3.6.1.4.1.3662.3662.3662.18.5.1.6 integer read-only
The total number of OAM requests transmitted.
                                             qoamRequestRx 1.3.6.1.4.1.3662.3662.3662.18.5.1.7 integer read-only
The total number of OAM requests received.
                                             qoamReplyTx 1.3.6.1.4.1.3662.3662.3662.18.5.1.8 integer read-only
The total number of OAM replies transmitted.
                                             qoamReplyRx 1.3.6.1.4.1.3662.3662.3662.18.5.1.9 integer read-only
The total number of OAM replies received.
                                             qoamTimeouts 1.3.6.1.4.1.3662.3662.3662.18.5.1.10 integer read-only
The total number of OAM replies that were not received before timeout.
                                             qoamMinRt 1.3.6.1.4.1.3662.3662.3662.18.5.1.11 integer read-only
The minimum round trip time in seconds for receiving OAM replies since the counters were last reset.
                                             qoamMaxRt 1.3.6.1.4.1.3662.3662.3662.18.5.1.12 integer read-only
The maximun round trip time in seconds for receiving OAM replies since the counters were last reset.
                                             qoamAveRt 1.3.6.1.4.1.3662.3662.3662.18.5.1.13 integer read-only
The average round trip time in seconds for receiving OAM replies since the counters were last reset.
                                             qoamOtherInErrs 1.3.6.1.4.1.3662.3662.3662.18.5.1.14 integer read-only
The number of OAM received but discarded due to errors.
                                             qoamOtherOutErrs 1.3.6.1.4.1.3662.3662.3662.18.5.1.15 integer read-only
The number of OAM can't transmitted due to errors.
                                             qoamCrc10InErrs 1.3.6.1.4.1.3662.3662.3662.18.5.1.16 integer read-only
The number of OAM received but discarded due to crc-10 checksum error.
                                             qoamCrc10OutErrs 1.3.6.1.4.1.3662.3662.3662.18.5.1.17 integer read-only
The number of OAM can't transmitted due to crc-10 checksum error.
                               qmiscGroup 1.3.6.1.4.1.3662.3662.3662.19