QB-SONET-MIB: View SNMP OID List / Download MIB

VENDOR: QUANTUM BRIDGE


 Home MIB: QB-SONET-MIB
Download as:   

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 qbSonetMIB 1.3.6.1.4.1.4323.2.6
This module defines additional objects for management of SONET links in Quantum Bridge devices, above and beyond what is defined in the standard SONET mib.
     qbSonetObjects 1.3.6.1.4.1.4323.2.6.1
         qbSonetAlarmMode 1.3.6.1.4.1.4323.2.6.1.1 integer read-write
Setting this object causes enabling or disabling optical ports alarms(LOS, LF, SD or SF). At initial start up time all optical ports are enabled. The user can change the port state to 'disabled' if there are not connections configured on the port. Upon configuring the first active connection to the optical port, the system automatically enables the port alarms. This object is used in conjunction with qbSonetSlot object which defines a scope of the configuration parameter: chassis wide or slot wide. enabled(1) - enables alarms on the selected slot or chassis. disabled(2) - disables alarms on the dormant optical ports of the selected slot or chassis. When read, the value of the object is always 'unknown(3)' This parameter is applied to WAN622, S622, and Q155 cards. Enumeration: 'disabled': 2, 'unknown': 3, 'enabled': 1.
         qbSonetScramblingMode 1.3.6.1.4.1.4323.2.6.1.2 integer read-write
Setting this object defines whether ATM cell payload is enabled or disabled. At initial start up time scrambling is set to 'enabled(1)' This object is used in conjunction with qbSonetSlot object which defines a scope of the configuration parameter: chassis wide or slot wide. enabled(1) - enables alarms on the selected slot or chassis. disabled(2) - disables alarms on the dormant optical ports of the selected slot or chassis. When read, the value of the object is alwayd 'unknown(3)' This parameter is applied to WAN622, S622, and Q155 cards. Enumeration: 'disabled': 2, 'unknown': 3, 'enabled': 1.
         qbSonetMediumType 1.3.6.1.4.1.4323.2.6.1.3 qbsonettype read-write
Setting this object defines whether SONET, SDH, SDHDS1, or SONETM13 signal is used across the chassis/slot. At initial start up the object is set to 'sonet(1)' This object is used in conjunction with qbSonetSlot object which defines a scope of the configuration parameter: chassis wide or slot wide. sonet(1) - sets signal format to 'sonet'. sdh(2) - sets signal format to 'sdh/VC12' sdhDs1(2) - sets signal format to 'sdh/VC11' sonetM13(2) - sets signal format to 'sonet/M13 payload' When read, the value of the object is always 'unknown(3)' This parameter is applied to D155VT/VC-T.
         qbSonetSlot 1.3.6.1.4.1.4323.2.6.1.4 integer read-write
This object defines a scope of the applied configuration parameter. If the object is set to non-zero value all ports of the defined slot are configured. When object is set to 0, this setting is applied to all applicable optical cards.
     qbSonetTables 1.3.6.1.4.1.4323.2.6.2
         qbSonetMediumTable 1.3.6.1.4.1.4323.2.6.2.1 no-access
The Quantum Bridge SONET Medium table contains extensions to the SONET Medium table.
             qbSonetMediumEntry 1.3.6.1.4.1.4323.2.6.2.1.1 no-access
An entry in the Quantum Bridge SONET Medium table.
                 qbSonetPortTxClockSource 1.3.6.1.4.1.4323.2.6.2.1.1.1 integer read-write
The source of Transmit Clock. recovered indicates that the recovered receive clock is used as the transmit clock. local indicates that a local clock source is used. Enumeration: 'local': 1, 'recovered': 2.
                 qbSonetPortScramblingMode 1.3.6.1.4.1.4323.2.6.2.1.1.2 integer read-write
The scrambling mode of the sonet interface. Enumeration: 'disabled': 2, 'enabled': 1.
                 qbSonetPortAlarmMode 1.3.6.1.4.1.4323.2.6.2.1.1.3 integer read-write
The alarm mode of the sonet interface. Enumeration: 'disabled': 2, 'enabled': 1.
                 qbSonetPortMediumType 1.3.6.1.4.1.4323.2.6.2.1.1.4 qbsonettype read-write
Setting this object defines whether SONET, SDH, SDHDS1, or SONETM13 signal is used across the chassis/slot. At initial start up the object is set to 'sonet(1)' This object is used in conjunction with qbSonetSlot object which defines a scope of the configuration parameter: chassis wide or slot wide. sonet(1) - sets signal format to 'sonet'. sdh(2) - sets signal format to 'sdh/VC12' sdhDs1(2) - sets signal format to 'sdh/VC11' sonetM13(2) - sets signal format to 'sonet/M13 payload' When read, the value of the object is always 'unknown(3)' This parameter is applied to D155VT/VC-T.
         qbSonetStatTable 1.3.6.1.4.1.4323.2.6.2.2 no-access
The Quantum Bridge SONET Stat table contains SONET statistics.
             qbSonetStatEntry 1.3.6.1.4.1.4323.2.6.2.2.1 no-access
An entry in the Quantum Bridge SONET Stat table.
                 qbSonetSectionBIP 1.3.6.1.4.1.4323.2.6.2.2.1.1 counter32 read-only
This object gives the number of section bit interleaved parity erorrs.
                 qbSonetLineBIP 1.3.6.1.4.1.4323.2.6.2.2.1.2 counter32 read-only
This object gives the number of line bit interleaved parity erorrs.
                 qbSonetPathBIP 1.3.6.1.4.1.4323.2.6.2.2.1.3 counter32 read-only
This object gives the number of path bit interleaved parity erorrs.
     qbSonetConformance 1.3.6.1.4.1.4323.2.6.3
         qbSonetCompliances 1.3.6.1.4.1.4323.2.6.3.1
             qbSonetCompliance 1.3.6.1.4.1.4323.2.6.3.1.1
The compliance statement for all agents that support this MIB. A compliant agent implements all objects defined in this MIB.
         qbSonetGroups 1.3.6.1.4.1.4323.2.6.3.2
             qbSonetAllGroup 1.3.6.1.4.1.4323.2.6.3.2.1
The set of all accessible objects in this MIB.