QB-ATM-MIB: View SNMP OID List / Download MIB

VENDOR: QUANTUM BRIDGE


 Home MIB: QB-ATM-MIB
Download as:   

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 qbAtmMIB 1.3.6.1.4.1.4323.2.7
This module defines additional objects for management of ATM links in Quantum Bridge devices, above and beyond what is defined in the standard ATM mib, and proposed drafts.
     qbAtmObjects 1.3.6.1.4.1.4323.2.7.1
         qbAtmInterfaceConfTable 1.3.6.1.4.1.4323.2.7.1.1 no-access
The Quantum Bridge ATM Interface Configuration Table contains extensions to the ATM Interface Configuration Table, one entry per ATM interface.
             qbAtmInterfaceConfEntry 1.3.6.1.4.1.4323.2.7.1.1.1 no-access
An entry in the Quantum ATM Interface Configuration Table. Every ATM interface contains a corresponding entry in the table.
                 qbAtmInterfaceConfPolicingStatus 1.3.6.1.4.1.4323.2.7.1.1.1.1 integer read-write
If this object is set to 'enable' the policing is enabled on this interface. If the object set to 'disable,' the policing is disabled. Note: policing can be set on the S622 and 155 cards only. Enumeration: 'enable': 1, 'disable': 2.
                 qbAtmInterfaceConfMaxPvcVpi 1.3.6.1.4.1.4323.2.7.1.1.1.2 integer read-only
This object indicates the maximum value of VPI that can be used to create a VC on a given ATM native interface.
                 qbAtmInterfaceConfMinPvcVpi 1.3.6.1.4.1.4323.2.7.1.1.1.3 integer read-only
This object indicates the minimum value of VPI that can be used to create a VC on a given ATM native interface.
                 qbAtmInterfaceConfMaxPvcVci 1.3.6.1.4.1.4323.2.7.1.1.1.4 integer read-only
This object indicates the maximum value of VCI that can be used to create a VC on a given ATM native interface.
                 qbAtmInterfaceConfMinPvcVci 1.3.6.1.4.1.4323.2.7.1.1.1.5 integer read-only
This object indicates the minimum value of VCI that can be used to create a VC on a given ATM native interface.
                 qbAtmInterfaceConfMaxPvpVpi 1.3.6.1.4.1.4323.2.7.1.1.1.6 integer read-only
This object indicates the maximum value of VPI that can be used to create a VP on a given ATM native interface.
                 qbAtmInterfaceConfMinPvpVpi 1.3.6.1.4.1.4323.2.7.1.1.1.7 integer read-only
This object indicates the minimum value of VPI that can be used to create a VP on a given ATM native interface.
         qbAtmTrafficDescrParamTable 1.3.6.1.4.1.4323.2.7.1.2 no-access
The Quantum Bridge ATM Traffic Descriptor Table contains extensions to the ATM Traffic Descriptor Table.
             qbAtmTrafficDescrParamEntry 1.3.6.1.4.1.4323.2.7.1.2.1 no-access
An entry in the Quantum Bridge ATM Traffic Descriptor Table.
                 qbAtmTrafficDescrParamName 1.3.6.1.4.1.4323.2.7.1.2.1.1 displaystring read-only
A textual description of the traffic descriptor.
                 qbAtmTrafficDescrParamDefault 1.3.6.1.4.1.4323.2.7.1.2.1.2 boolean read-only
The object indicates whether or not this is a default traffic descriptor. Traffic descriptor with indexes from 1 to 20 are default traffic descriptors and cannot be deleted.
         qbAtmVclTable 1.3.6.1.4.1.4323.2.7.1.3 no-access
The Quantum Bridge Table contains an extension to the atmVclConnectTable, An entry in this table models VCLs.
             qbAtmVclEntry 1.3.6.1.4.1.4323.2.7.1.3.1 no-access
An entry in the QB ATM atmVclConnectTable.
                 qbAtmVclLoopback 1.3.6.1.4.1.4323.2.7.1.3.1.1 qbenablestatus read-write
Enable loopback on this ATM VCL
                 qbAtmVclF4F5LoopbackInsert 1.3.6.1.4.1.4323.2.7.1.3.1.2 octet string read-write
This is a loopback Insert object for LLID. Start loopback Insert by setting this to an LLID value.
                 qbAtmVclF4F5LoopbackStatus 1.3.6.1.4.1.4323.2.7.1.3.1.3 qbf4f5loopbackstatus read-only
Status of loopback Insert command: in-progress, success, timeout.
                 qbAtmVclF4F5LoopbackTimestamp 1.3.6.1.4.1.4323.2.7.1.3.1.4 timestamp read-only
Value of sysUptime when last Insert completed.
                 qbAtmVclMgmtIpAddr 1.3.6.1.4.1.4323.2.7.1.3.1.5 ipaddress read-write
Active IP Address for in-band Management SNMP of this chassis.
                 qbAtmVclMgmtIpMask 1.3.6.1.4.1.4323.2.7.1.3.1.6 ipaddress read-write
This is the IP network mask associated with the in-band Management interface.
                 qbAtmVclMgmtNeighborIP 1.3.6.1.4.1.4323.2.7.1.3.1.7 ipaddress read-write
This is the neighbor IP address associated with the in-band Management interface.
                 qbAtmVclConnKind 1.3.6.1.4.1.4323.2.7.1.3.1.8 qbpvcconnkind read-only
The VCL connection type.
                 qbAtmVclF4F5TxStatus 1.3.6.1.4.1.4323.2.7.1.3.1.9 qbf4f5status read-only
The transmitted OAM status for the PVC.
                 qbAtmVclF4F5TxLastChange 1.3.6.1.4.1.4323.2.7.1.3.1.10 timestamp read-only
The value of sysUPtime when qbAtmVclF4F5TxStatus last changed.
                 qbAtmVclF4F5RxStatus 1.3.6.1.4.1.4323.2.7.1.3.1.11 qbf4f5status read-only
The received OAM status of the PVC.
                 qbAtmVclF4F5RxLastChange 1.3.6.1.4.1.4323.2.7.1.3.1.12 timestamp read-only
The value of sysUPtime when qbAtmVclF4F5TxStatus last changed.
         qbAtmVplTable 1.3.6.1.4.1.4323.2.7.1.4 no-access
The Quantum Bridge Table contains an extension to the atmVclConnectTable, An entry in this table models VPLs.
             qbAtmVplEntry 1.3.6.1.4.1.4323.2.7.1.4.1 no-access
An entry in the QB ATM qbAtmVpTable.
                 qbAtmVplLoopback 1.3.6.1.4.1.4323.2.7.1.4.1.1 qbenablestatus read-write
Enable loopback on this ATM VPL
                 qbAtmVplF4F5LoopbackInsert 1.3.6.1.4.1.4323.2.7.1.4.1.2 octet string read-write
This is a loopback Insert object for LLID. Start loopback Insert by setting this to an LLID value.
                 qbAtmVplF4F5LoopbackStatus 1.3.6.1.4.1.4323.2.7.1.4.1.3 qbf4f5loopbackstatus read-only
Status of loopback Insert command: in-progress, success, timeout.
                 qbAtmVplF4F5LoopbackTimestamp 1.3.6.1.4.1.4323.2.7.1.4.1.4 timestamp read-only
Value of sysUptime when last Insert completed.
                 qbAtmVplF4F5TxStatus 1.3.6.1.4.1.4323.2.7.1.4.1.5 qbf4f5status read-only
The transmitted OAM status for the PVP.
                 qbAtmVplF4F5TxLastChange 1.3.6.1.4.1.4323.2.7.1.4.1.6 timestamp read-only
The value of sysUPtime when qbAtmVclF4F5TxStatus last changed.
                 qbAtmVplF4F5RxStatus 1.3.6.1.4.1.4323.2.7.1.4.1.7 qbf4f5status read-only
The received OAM status of the PVP.
                 qbAtmVplF4F5RxLastChange 1.3.6.1.4.1.4323.2.7.1.4.1.8 timestamp read-only
The value of sysUPtime when qbAtmVclF4F5TxStatus last changed.
         qbAtmVcCrossConnectTable 1.3.6.1.4.1.4323.2.7.1.5 no-access
The Quantum Bridge Table contains an extension to the atmVcCrossConnectTable, An entry in this table models two cross-connected VCLs.
             qbAtmVcCrossConnectEntry 1.3.6.1.4.1.4323.2.7.1.5.1 no-access
An entry in the QB ATM atmVcCrossConnectTable.
                 qbAtmVcCrossConnectName 1.3.6.1.4.1.4323.2.7.1.5.1.1 displaystring read-only
A textual description for the cross connect.
                 qbAtmVcCrossConnectRxTrafficDescrIndex 1.3.6.1.4.1.4323.2.7.1.5.1.2 atmtrafficdescrparamindex read-only
The value of this object identifies the row in the ATM Traffic Descriptor Table which applies to the receive direction of this VCLs cross-connect.
                 qbAtmVcCrossConnectTxTrafficDescrIndex 1.3.6.1.4.1.4323.2.7.1.5.1.3 atmtrafficdescrparamindex read-only
The value of this object identifies the row of the ATM Traffic Descriptor Table which applies to the transmit direction of this VCLs cross-connect
         qbAtmVpCrossConnectTable 1.3.6.1.4.1.4323.2.7.1.6 no-access
The Quantum Bridge Table contains an extension to the atmVpCrossConnectTable, An entry in this table models two cross-connected VPLs.
             qbAtmVpCrossConnectEntry 1.3.6.1.4.1.4323.2.7.1.6.1 no-access
An entry in the QB ATM atmVpCrossConnectTable.
                 qbAtmVpCrossConnectName 1.3.6.1.4.1.4323.2.7.1.6.1.1 displaystring read-only
A textual description for the cross connect.
                 qbAtmVpCrossConnectRxTrafficDescrIndex 1.3.6.1.4.1.4323.2.7.1.6.1.2 atmtrafficdescrparamindex read-only
The value of this object identifies the row in the ATM Traffic Descriptor Table which applies to the receive direction of this VPLs cross-connect.
                 qbAtmVpCrossConnectTxTrafficDescrIndex 1.3.6.1.4.1.4323.2.7.1.6.1.3 atmtrafficdescrparamindex read-only
The value of this object identifies the row of the ATM Traffic Descriptor Table which applies to the transmit direction of this VPLs cross-connect
         qbAtmSigGroup 1.3.6.1.4.1.4323.2.7.1.7
             qbAtmPnniNodeTable 1.3.6.1.4.1.4323.2.7.1.7.1 no-access
The QbAtmpnniNodeTable contains attributes that affect the operation of a PNNI logical node. There is a single row in this table for each PNNI peer group that the managed system is expected or eligible to become a member of.
                 qbAtmPnniNodeEntry 1.3.6.1.4.1.4323.2.7.1.7.1.1 no-access
An entry in the table, containing information about a PNNI logical node in this switching system.
                     qbAtmPnniNodeIndex 1.3.6.1.4.1.4323.2.7.1.7.1.1.1 integer no-access
A value assigned to a node in this switching system that uniquely identifies it in the MIB.
                     qbAtmPnniNodeNetAddrPrefix 1.3.6.1.4.1.4323.2.7.1.7.1.1.2 octet string read-only
Indicates the Network Prefix to use for the ATM End System Address. The value is 13 bytes long, and is specified in the hexadecimal format. If less than 13 bytes(26 chars) are received, the agent appends trailing zero's. The object can be set to ''h, if PNNI protocol is desirable on all interfaces.
                     qbAtmPnniNodeEndSysId 1.3.6.1.4.1.4323.2.7.1.7.1.1.3 octet string read-only
Indicates the End System Identifier for ATM End System Address. The value is 7 bytes long, and is specified in the hexadecimal format. The object can be set to ''h, if PNNI protocol is desirable on all interfaces.
                     qbAtmPnniNodeLevel 1.3.6.1.4.1.4323.2.7.1.7.1.1.4 integer read-only
The level of PNNI hierarchy at which this node exists. This attribute is used to determine the default node ID and the default peer group ID for this node. This object may only be written when pnniNodeAdminStatus has the value down.
                     qbAtmPnniNodeRowStatus 1.3.6.1.4.1.4323.2.7.1.7.1.1.5 rowstatus read-only
To create, delete, activate and de-activate a Node. Setting this object to createAndGo(4) causes the corresponding row to be created. Setting this object to destroy(6) causes the corresponding row to be deleted. Note that -- currently-- only a single instance of a row can be created in this table.
                     qbAtmPnniNodeOperStatus 1.3.6.1.4.1.4323.2.7.1.7.1.1.6 integer read-only
Indicates the Operational Status of the PNNI Node. For Logical Group Nodes, the Operational Status will be up only if the child becomes the PGL. Enumeration: 'down': 2, 'up': 1.
                     qbAtmPnniNodeAtmAddress 1.3.6.1.4.1.4323.2.7.1.7.1.1.7 qbatmpnniatmaddr read-only
This node's ATM End System Address. Remote systems wishing to exchange PNNI protocol packets with this node should direct packets or calls to this address. The current Qb implementation does not support writing this value.
                     qbAtmPnniNodePeerGroupId 1.3.6.1.4.1.4323.2.7.1.7.1.1.8 qbatmpnnipeergroupid read-only
The Peer Group Identifier of the peer group that the given node is to become a member of.
             qbAtmPnniIfTable 1.3.6.1.4.1.4323.2.7.1.7.2 no-access
The qbAtmPnniIfTable contains the attributes necessary to configure a physical interface on a switching system capable of being used for PNNI routing. An ifIndex is used as the instance ID to uniquely identify the interface on the local switching system. This index has the same value as the ifIndex object defined in RFC 1573 for the same interface, since this table correlates with the ifTable in RFC 1573. One row in this table is created by the managed system for each row in the ifTable that has an ifType of atm(37) or atmLogical(80).
                 qbAtmPnniIfEntry 1.3.6.1.4.1.4323.2.7.1.7.2.1 no-access
An entry in the table, containing PNNI specific interface information in this switching system.
                     qbAtmPnniIfNodeIndex 1.3.6.1.4.1.4323.2.7.1.7.2.1.1 integer read-write
Identifies the node within the switching system that the interface is directly attached to. Note: For this release this value can be set only to 1.
                     qbAtmPnniIfAdmWeightCbr 1.3.6.1.4.1.4323.2.7.1.7.2.1.2 qbatmpnniweight read-write
The administrative weight of this interface for the constant bit rate service category.
                     qbAtmPnniIfAdmWeightRtVbr 1.3.6.1.4.1.4323.2.7.1.7.2.1.3 qbatmpnniweight read-write
The administrative weight of this interface for the real-time variable bit rate service category.
                     qbAtmPnniIfAdmWeightNrtVbr 1.3.6.1.4.1.4323.2.7.1.7.2.1.4 qbatmpnniweight read-write
The administrative weight of this interface for the non-real-time variable bit rate service category.
                     qbAtmPnniIfAdmWeightAbr 1.3.6.1.4.1.4323.2.7.1.7.2.1.5 qbatmpnniweight read-write
The administrative weight of this interface for the available bit rate service category.
                     qbAtmPnniIfAdmWeightUbr 1.3.6.1.4.1.4323.2.7.1.7.2.1.6 qbatmpnniweight read-write
The administrative weight of this interface for the unspecified bit rate service category.
                     qbAtmPnniIfRccServiceCategory 1.3.6.1.4.1.4323.2.7.1.7.2.1.7 atmservicecategory read-write
The service category used for the PNNI routing control channel (VCI=18) on this interface.
                     qbAtmPnniIfRccTrafficDescrIndex 1.3.6.1.4.1.4323.2.7.1.7.2.1.8 atmtrafficdescrparamindex read-write
The traffic descriptor index referring to the entry in the atmTrafficDescrParamTable defined in RFC 1695 that specifies the traffic allocation for the PNNI routing control channel (VCI=18) on this interface.
                     qbAtmPnniIfPolicingStatus 1.3.6.1.4.1.4323.2.7.1.7.2.1.9 integer read-write
If this object is set to enable, the policing is enabled on this interface. If the object is set to 'disable' the policing is disabled. Enumeration: 'enable': 1, 'disable': 2.
             qbAtmPnniRouteAddrTable 1.3.6.1.4.1.4323.2.7.1.7.3 no-access
A table containing all the attributes necessary to determine what the PNNI entity believes is reachable in terms of ATM End System Addresses, and to determine which nodes are advertising this reachability. This table is also used to configure static routes to reachable address prefixes. The local node index that receives the reachability information, reachable address, address prefix length, and an index that distinguishes between multiple listings of connectivity to a given address prefix from a given local node are combined to form an instance ID for this object.
                 qbAtmPnniRouteAddrEntry 1.3.6.1.4.1.4323.2.7.1.7.3.1 no-access
An entry in the table, containing information about a reachable address prefix.
                     qbAtmPnniRouteAddrIfIndex 1.3.6.1.4.1.4323.2.7.1.7.3.1.1 interfaceindex no-access
The local interface over which the reachable address can be reached.
                     qbAtmPnniRouteAddrAddress 1.3.6.1.4.1.4323.2.7.1.7.3.1.2 octet string no-access
The value of the ATM End System Address prefix.
                     qbAtmPnniRouteAddrPrefixLength 1.3.6.1.4.1.4323.2.7.1.7.3.1.3 integer read-only
Indicates the number of bits to be applied to the ATM End System Address prefix.
                     qbAtmPnniRouteAddrRowStatus 1.3.6.1.4.1.4323.2.7.1.7.3.1.4 rowstatus read-only
To create, delete, activate and de-activate a reachable address prefix.
                     qbAtmPnniRouteAddrProto 1.3.6.1.4.1.4323.2.7.1.7.3.1.5 integer read-only
This object indicates the Routing mechanism through which the connectivity from the advertising node to the reachable address prefix was learned. Enumeration: 'pnni': 2, 'iisp': 1.
             qbAtmInterfaceConfSigTable 1.3.6.1.4.1.4323.2.7.1.7.4 no-access
This table contains ATM local interface configuration parameters, one entry per ATM interface port.
                 qbAtmInterfaceConfSigEntry 1.3.6.1.4.1.4323.2.7.1.7.4.1 no-access
This list contains additonal ATM interface configuration parameters and state variables.
                     qbAtmInterfaceConfSigMode 1.3.6.1.4.1.4323.2.7.1.7.4.1.1 qbatmsigspec read-write
The type of ATM interface which is either a UNI (User to Network), PNNI or IISP. To modify the qbAtmInterfaceConfSignType, ifAdminStatus has to be down.
                     qbAtmInterfaceConfSigSide 1.3.6.1.4.1.4323.2.7.1.7.4.1.2 integer read-write
The side of ATM interface which is either a user or network side. NotApplicable value implies that qbAtmInterfaceConfSignType is other than uni or iisp. Enumeration: 'notApplicable': 3, 'user': 1, 'network': 2.
                     qbAtmInterfaceConfSigParseMode 1.3.6.1.4.1.4323.2.7.1.7.4.1.3 integer read-write
Indicates to the signalling stack to use strict parsing of the INformation Elements (IEs) within signalling messages. This parameter is set to 'on' for conformance testing. For systems that do not test conformance it is recommended to set the object to 'off'. Enumeration: 'on': 1, 'off': 2.
                     qbAtmInterfaceConfSigAdminStatus 1.3.6.1.4.1.4323.2.7.1.7.4.1.4 integer read-write
Enable/Disable signalling/sscop on this interface. To modify the qbAtmInterfaceConfSignAdminStatus, ifAdminStatus has to be down. Enumeration: 'disabled': 2, 'enabled': 1.
                     qbAtmInterfaceConfSigSvcMinVci 1.3.6.1.4.1.4323.2.7.1.7.4.1.5 integer read-write
The minimum value of SVC connection for vci.
                     qbAtmInterfaceConfSigSvcMaxVci 1.3.6.1.4.1.4323.2.7.1.7.4.1.6 integer read-write
The maximum value of SVC connection for vci.
                     qbAtmInterfaceConfSigSvcMinVpi 1.3.6.1.4.1.4323.2.7.1.7.4.1.7 integer read-write
The minimum value of SVC connection for vpi.
                     qbAtmInterfaceConfSigSvcMaxVpi 1.3.6.1.4.1.4323.2.7.1.7.4.1.8 integer read-write
The maximum value of SVC connection for vpi.
                     qbAtmInterfaceConfSigSvpMinVpi 1.3.6.1.4.1.4323.2.7.1.7.4.1.9 integer read-write
The minimum value of SVP connection for vpi.
                     qbAtmInterfaceConfSigSvpMaxVpi 1.3.6.1.4.1.4323.2.7.1.7.4.1.10 integer read-write
The maximum value of SVP connection for vpi.
                     qbAtmInterfaceConfSigLastChange 1.3.6.1.4.1.4323.2.7.1.7.4.1.11 atmvorxlastchange read-only
The value of sysUpTime at the time this interface changed its current administrative state.
                     qbAtmInterfaceConfSigIlmiEnable 1.3.6.1.4.1.4323.2.7.1.7.4.1.12 boolean read-write
Can be enabled only if signaling is configured. ILMI is enabled by default when signaling is configured on the system and the user may enter the disable option .
             qbAtmPnniNbrPeerTable 1.3.6.1.4.1.4323.2.7.1.7.5 no-access
The qbAtmPnniNbrPeer Object contains all the attributes necessary to describe the relationship a node in this switching system has with a neighboring node within the same peer group. A concatenation of the Node Identifier of the node within the local switching system and the neighboring peer's Node Identifier is used to form the instance ID for this object. The entire qbAtmPnniNbrPeer object is read-only, reflecting the fact that neighboring peers are discovered dynamically by the PNNI protocol rather than configured.
                 qbAtmPnniNbrPeerEntry 1.3.6.1.4.1.4323.2.7.1.7.5.1 no-access
An entry in the table, containing information about this node's relationship with a neighboring peer node.
                     qbAtmPnniPeerRemoteNodeId 1.3.6.1.4.1.4323.2.7.1.7.5.1.1 qbatmpnninodeid no-access
The Node Identifier of the neighboring peer node.
                     qbAtmPnniPeerState 1.3.6.1.4.1.4323.2.7.1.7.5.1.2 integer read-only
Indicates the state of this node's Neighboring Peer State Machine associated with qbAtmPnniPeerRemoteNodeId. Enumeration: 'exchanging': 3, 'loading': 4, 'npdown': 1, 'full': 5, 'negotiating': 2.
                     qbAtmPnniPeerSvccRccIndex 1.3.6.1.4.1.4323.2.7.1.7.5.1.3 integer read-only
Identifies the SVCC-based RCC being used to communicate with the neighboring peer if one exists. If both the local node and the neighboring peer node are lowest-level nodes, this attribute is set to zero.
                     qbAtmPnniPeerPortCount 1.3.6.1.4.1.4323.2.7.1.7.5.1.4 integer read-only
A count of the total number of ports that connect to the neighboring peer. If the neighboring peer only communicates via an SVCC-based RCC, the value of this attribute is set to zero. Otherwise it is set to the total number of ports to the neighboring peer in the Hello state 2-WayInside.
                     qbAtmPnniPeerRcvDbSums 1.3.6.1.4.1.4323.2.7.1.7.5.1.5 counter32 read-only
A count of the number of Database Summary Packets received from the neighboring peer.
                     qbAtmPnniPeerXmtDbSums 1.3.6.1.4.1.4323.2.7.1.7.5.1.6 counter32 read-only
A count of the number of Database Summary Packets transmitted to the neighboring peer.
                     qbAtmPnniPeerRcvPtsps 1.3.6.1.4.1.4323.2.7.1.7.5.1.7 counter32 read-only
A count of the number of PTSPs received from the neighboring peer.
                     qbAtmPnniPeerXmtPtsps 1.3.6.1.4.1.4323.2.7.1.7.5.1.8 counter32 read-only
A count of the number of PTSPs (re)transmitted to the neighboring peer.
                     qbAtmPnniPeerRcvPtseReqs 1.3.6.1.4.1.4323.2.7.1.7.5.1.9 counter32 read-only
A count of the number of PTSE Request packets received from the neighboring peer.
                     qbAtmPnniPeerXmtPtseReqs 1.3.6.1.4.1.4323.2.7.1.7.5.1.10 counter32 read-only
A count of the number of PTSE Request packets transmitted to the neighboring peer.
                     qbAtmPnniPeerRcvPtseAcks 1.3.6.1.4.1.4323.2.7.1.7.5.1.11 counter32 read-only
A count of the number of PTSE Ack packets received from the neighboring peer.
                     qbAtmPnniPeerXmtPtseAcks 1.3.6.1.4.1.4323.2.7.1.7.5.1.12 counter32 read-only
A count of the number of PTSE Ack packets transmitted to the neighboring peer.
             qbAtmPnniNodePglTable 1.3.6.1.4.1.4323.2.7.1.7.6 no-access
Peer group leader election information for a PNNI node in this switching system.
                 qbAtmPnniNodePglEntry 1.3.6.1.4.1.4323.2.7.1.7.6.1 no-access
An entry in the table, containing PGL election information of a PNNI logical node in this switching system.
                     qbAtmPnniNodePglLeadershipPriority 1.3.6.1.4.1.4323.2.7.1.7.6.1.1 integer read-only
The Leadership priority value this node should advertise in its nodal information group for the given peer group. Only the value zero can be used with nodes that are not PGL/LGN capable. If there is no configured parent node index or no corresponding entry in the pnniNodeTable, then the advertised leadership priority is zero regardless of this value.
                     qbAtmPnniNodeCfgParentNodeIndex 1.3.6.1.4.1.4323.2.7.1.7.6.1.2 integer32 read-only
The local node index used to identify the node that will represent this peer group at the next higher level of hierarchy, if this node becomes peer group leader. The value 0 indicates that there is no parent node.
                     qbAtmPnniNodePglInitTime 1.3.6.1.4.1.4323.2.7.1.7.6.1.3 integer32 read-only
The amount of time in seconds this node will delay advertising its choice of preferred PGL after having initialized operation and reached the full state with at least one neighbor in the peer group.
                     qbAtmPnniNodePglOverrideDelay 1.3.6.1.4.1.4323.2.7.1.7.6.1.4 integer32 read-only
The amount of time in seconds a node will wait for itself to be declared the preferred PGL by unanimous agreement among its peers. In the absence of unanimous agreement this will be the amount of time that will pass before this node considers a two thirds majority as sufficient agreement to declare itself peer group leader, abandoning the attempt to get unanimous agreement.
                     qbAtmPnniNodePglReelectTime 1.3.6.1.4.1.4323.2.7.1.7.6.1.5 integer32 read-only
The amount of time in seconds after losing connectivity to the current peer group leader, that this node will wait before re-starting the process of electing a new peer group leader.
                     qbAtmPnniNodePglState 1.3.6.1.4.1.4323.2.7.1.7.6.1.6 integer read-only
Indicates the state that this node is in with respect to the Peer Group Leader election that takes place in the node's peer group. The values are enumerated in the Peer Group Leader State Machine. Enumeration: 'hungElection': 9, 'calculating': 5, 'awaitReElection': 10, 'awaitingFull': 3, 'initialDelay': 4, 'operPgl': 7, 'other': 11, 'operNotPgl': 8, 'awaiting': 2, 'starting': 1, 'awaitUnanimity': 6.
                     qbAtmPnniNodePreferredPgl 1.3.6.1.4.1.4323.2.7.1.7.6.1.7 qbatmpnninodeid read-only
The Node ID of the node which the local node believes should be or become the peer group leader. This is also the value the local node is currently advertising in the `Preferred Peer Group Leader Node ID' field of its nodal information group within the given peer group. If a Preferred PGL has not been chosen, this attribute's value is set to (all) zero(s).
                     qbAtmPnniNodePeerGroupLeader 1.3.6.1.4.1.4323.2.7.1.7.6.1.8 qbatmpnninodeid read-only
The Node Identifier of the node which is currently operating as peer group leader of the peer group this node belongs to. If a PGL has not been elected, this attribute's value is set to (all) zero(s).
                     qbAtmPnniNodePglTimeStamp 1.3.6.1.4.1.4323.2.7.1.7.6.1.9 timestamp read-only
The time at which the current Peer Group Leader established itself.
                     qbAtmPnniNodeActiveParentNodeId 1.3.6.1.4.1.4323.2.7.1.7.6.1.10 qbatmpnninodeid read-only
The Node Identifier value being used by the Peer Group Leader to represent this peer group at the next higher level of the hierarchy. If this node is at the highest level of the hierarchy or if no PGL has yet been elected the PNNI Protocol Entity sets the value of this attribute to (all) zero(s).
             qbAtmPnniNodeTimerTable 1.3.6.1.4.1.4323.2.7.1.7.7 no-access
A table of initial PNNI timer values and significant change thresholds.
                 qbAtmPnniNodeTimerEntry 1.3.6.1.4.1.4323.2.7.1.7.7.1 no-access
An entry in the table, containing initial PNNI timer values and significant change thresholds of a PNNI logical node in this switching system.
                     qbAtmPnniNodePtseHolddown 1.3.6.1.4.1.4323.2.7.1.7.7.1.1 integer32 read-only
The initial value for the PTSE hold down timer that will be used by the given node to limit the rate at which it can re-originate PTSEs. It must be a positive non-zero number.
                     qbAtmPnniNodeHelloHolddown 1.3.6.1.4.1.4323.2.7.1.7.7.1.2 integer32 read-only
The initial value for the Hello hold down timer that will be used by the given node to limit the rate at which it sends Hellos. It must be a positive non-zero number.
                     qbAtmPnniNodeHelloInterval 1.3.6.1.4.1.4323.2.7.1.7.7.1.3 integer32 read-only
The initial value for the Hello Timer. In the absence of triggered Hellos, this node will send one Hello packet on each of its ports on this interval.
                     qbAtmPnniNodeHelloInactivityFactor 1.3.6.1.4.1.4323.2.7.1.7.7.1.4 integer32 read-only
The value for the Hello Inactivity factor that this node will use to determine when a neighbor has gone down.
                     qbAtmPnniNodeHlinkInact 1.3.6.1.4.1.4323.2.7.1.7.7.1.5 integer32 read-only
The amount of time a node will continue to advertise a horizontal (logical) link for which it has not received and processed a LGN Horizontal Link information group.
                     qbAtmPnniNodePtseRefreshInterval 1.3.6.1.4.1.4323.2.7.1.7.7.1.6 integer32 read-only
The initial value for the Refresh timer that this node will use to drive (re-)origination of PTSEs in the absence of triggered updates.
                     qbAtmPnniNodePtseLifetimeFactor 1.3.6.1.4.1.4323.2.7.1.7.7.1.7 integer read-only
The value for the lifetime multiplier, expressed as a percentage. The result of multiplying the qbAtmPnniNodePtseRefreshInterval attribute value by this attribute value is used as the initial lifetime that this node places into self-originated PTSEs.
                     qbAtmPnniNodeRxmtInterval 1.3.6.1.4.1.4323.2.7.1.7.7.1.8 integer32 read-only
The period between retransmissions of unacknowledged Database Summary packets, PTSE Request packets, and PTSPs.
                     qbAtmPnniNodePeerDelayedAckInterval 1.3.6.1.4.1.4323.2.7.1.7.7.1.9 integer32 read-only
The minimum amount of time between transmissions of delayed PTSE acknowledgement packets.
                     qbAtmPnniNodeAvcrPm 1.3.6.1.4.1.4323.2.7.1.7.7.1.10 integer read-only
The proportional multiplier used in the algorithms that determine significant change for AvCR parameters, expressed as a percentage.
                     qbAtmPnniNodeAvcrMt 1.3.6.1.4.1.4323.2.7.1.7.7.1.11 integer read-only
The minimum threshold used in the algorithms that determine significant change for AvCR parameters, expressed as a percentage.
                     qbAtmPnniNodeCdvPm 1.3.6.1.4.1.4323.2.7.1.7.7.1.12 integer read-only
The proportional multiplier used in the algorithms that determine significant change for CDV metrics, expressed as a percentage.
                     qbAtmPnniNodeCtdPm 1.3.6.1.4.1.4323.2.7.1.7.7.1.13 integer read-only
The proportional multiplier used in the algorithms that determine significant change for CTD metrics, expressed as a percentage.
             qbAtmPnniLinkTable 1.3.6.1.4.1.4323.2.7.1.7.8 no-access
This table contains the attributes necessary to describe the operation of logical links attached to the local switching system and the relationship with the neighbor nodes on the other end of the links. Links are attached to a specific node within the switching system. A concatenation of the Node Index of the node within the local switching system and the port ID are used as the instance ID to uniquely identify the link. Links may represent horizontal links between lowest level neighboring peers, outside links, uplinks, or horizontal links to/from LGNs. The entire qbAtmPnniLink object is read-only, reflecting the fact that this information is discovered dynamically by the PNNI protocol rather than configured.
                 qbAtmPnniLinkEntry 1.3.6.1.4.1.4323.2.7.1.7.8.1 no-access
An entry in the table, containing information about a link attached to a PNNI logical node in this switching system.
                     qbAtmPnniLinkPortId 1.3.6.1.4.1.4323.2.7.1.7.8.1.1 integer32 no-access
The Port Identifier of the link as selected by the local node. This value has meaning only within the context of the node to which the port is attached.
                     qbAtmPnniLinkType 1.3.6.1.4.1.4323.2.7.1.7.8.1.2 integer read-only
Indicates the type of link being described. Enumeration: 'lowestLevelOutsideLink': 4, 'unknown': 1, 'outsideLinkAndUplink': 6, 'lowestLevelHorizontalLink': 2, 'horizontalLinkToFromLgn': 3, 'uplink': 5.
                     qbAtmPnniLinkHelloState 1.3.6.1.4.1.4323.2.7.1.7.8.1.3 qbatmpnnihellostate read-only
For horizontal and outside links between lowest-level nodes and for links of unknown type, this attribute indicates the state of the Hello protocol exchange over this link. For links to/from LGNs, this attribute indicates the state of the corresponding LGN Horizontal Link Hello State Machine. For uplinks (where the port ID is not also used for the underlying outside link), this attribute is set to notApplicable.
         qbAtmHiddenVclTable 1.3.6.1.4.1.4323.2.7.1.8 no-access
The QB table with extensions to atmVclTable
             qbAtmHiddenVclEntry 1.3.6.1.4.1.4323.2.7.1.8.1 no-access
Entry in qbAtmHiddenVclTable
                 qbAtmHiddenVclName 1.3.6.1.4.1.4323.2.7.1.8.1.1 displaystring read-only
A textual description for the SPVC name.
                 qbAtmHiddenVclType 1.3.6.1.4.1.4323.2.7.1.8.1.2 integer read-only
Value for the interface type. Native ATM - Q155, S622; non-native - E1, DS1, ENET, VT Enumeration: 'non-native': 2, 'native': 1.
                 qbAtmHiddenVclIfIndex 1.3.6.1.4.1.4323.2.7.1.8.1.3 interfaceindex read-only
ifIndex value for IOT interface. This value is not used for native ATM interfaces.
                 qbAtmHiddenVclVtIndex 1.3.6.1.4.1.4323.2.7.1.8.1.4 integer read-only
Address information for a VT card. This value is used for VT cards only.
         qbAtmSwitchModuleGroup 1.3.6.1.4.1.4323.2.7.1.9
             qbAtmStatsBuffOverCells 1.3.6.1.4.1.4323.2.7.1.9.1 counter32 read-only
This object gives the number of cells discarded due to buffer overflows.
             qbAtmStatsInvalidCells 1.3.6.1.4.1.4323.2.7.1.9.2 counter32 read-only
This object gives the number of cells discarded due to unknown VPI/VCI.
             qbAtmStatsInvUpdateCells 1.3.6.1.4.1.4323.2.7.1.9.3 counter32 read-only
This object gives the number of cells discarded due to internal switch errors.
         qbAtmInterfaceStatTable 1.3.6.1.4.1.4323.2.7.1.10 no-access
The Quantum Bridge ATM Interface Statistic Table contains ATM layer statistics for each ATM interface.
               qbAtmInterfaceStatEntry 1.3.6.1.4.1.4323.2.7.1.10.1 no-access
An entry in the Quantum ATM Interface Table. Every ATM interface contains a corresponding entry in the table.
                   qbAtmInterfaceStatTxOAMCells 1.3.6.1.4.1.4323.2.7.1.10.1.1 counter32 read-only
The total number of valid OAM cells transmitted by this atm layer interface.
                   qbAtmInterfaceStatRxOAMCells 1.3.6.1.4.1.4323.2.7.1.10.1.2 counter32 read-only
The total number of OAS ATM cells received by this atm layer interface.
         qbAtmInBandMgtTable 1.3.6.1.4.1.4323.2.7.1.11 no-access
The QbAtmInBandMgtTable defines in-band Management IP channels for use by ATM connections.
               qbAtmInBandMgtEntry 1.3.6.1.4.1.4323.2.7.1.11.1 no-access
An entry in the table, containing information about an in-band Management channel.
                   qbAtmInBandMgtIpAddr 1.3.6.1.4.1.4323.2.7.1.11.1.1 ipaddress no-access
An IP Address for in-band SNMP Management of this chassis.
                   qbAtmInBandMgtIpMask 1.3.6.1.4.1.4323.2.7.1.11.1.2 ipaddress read-only
The IP Network Mask associated with this in-band SNMP Management IP Address.
                   qbAtmInBandMgtIpIfIndex 1.3.6.1.4.1.4323.2.7.1.11.1.3 interfaceindex read-only
The Interface associated with this in-band management address.
                   qbAtmInBandMgtNeighborIp 1.3.6.1.4.1.4323.2.7.1.11.1.4 ipaddress read-only
This is the neighbor IP address associated with the in-band Management Interface. If the qbAtmInBandMgtConnKind is any value other than pvc(1), this object is non-applicable.
                   qbAtmInBandMgtIfIndex 1.3.6.1.4.1.4323.2.7.1.11.1.5 interfaceindex read-only
This is the interface index associated with the in-band Management connection. If the qbAtmInBandMgtConnKind is any value other than pvc(1), this object is non-applicable.
                   qbAtmInBandMgtVpi 1.3.6.1.4.1.4323.2.7.1.11.1.6 atmvpidentifier read-only
If the value of qbAtmInBandMgtConnKind is pvc(1), this is the VPI associated with this in-band management connection. If the value of qbAtmInBandMgtConnKind is spvcInitiator(4), this object is target VPI. In all other cases, the value of this object is non-applicable.
                   qbAtmInBandMgtVci 1.3.6.1.4.1.4323.2.7.1.11.1.7 atmvcidentifier read-only
If the value of qbAtmInBandMgtConnKind is pvc(1), this is the VCI associated with this in-band management connection. If the value of qbAtmInBandMgtConnKind is spvcInitiator(4), this object is target VCI. In all other cases, the value of this object is non-applicable.
                   qbAtmInBandMgtConnKind 1.3.6.1.4.1.4323.2.7.1.11.1.8 atmconnkind read-only
This is the connection type associated with the in-band Management connection. The currently accepted types are pvc(1), spvcInitiator(4) and spvcTarget(5).
                   qbAtmInBandMgtTxTd 1.3.6.1.4.1.4323.2.7.1.11.1.9 atmtrafficdescrparamindex read-only
The Transmit traffic descriptor associated with this in-band management channel.
                   qbAtmInBandMgtRxTd 1.3.6.1.4.1.4323.2.7.1.11.1.10 atmtrafficdescrparamindex read-only
The Receive traffic descriptor associated with this in-band management channel.
                   qbAtmInBandMgtTargetNsapAddr 1.3.6.1.4.1.4323.2.7.1.11.1.11 atmaddr read-only
If the value of qbAtmInBandMgtConnKind is spvcInitiator(4) this object represetns the Target NSAP Address of the connection. In all other cases, the value of this object is non-applicable.
                   qbAtmInBandMgtRowStatus 1.3.6.1.4.1.4323.2.7.1.11.1.12 rowstatus read-only
To create, or delete an Entry in this table. Setting this object to createAndGo(4) causes the corresponding row to be created. Setting this object to destroy(6) causes the corresponding row to be deleted. Note that -- currently-- only a single instance of a row can be created in this table.
         qbAtmTrafficDescriptorTypes 1.3.6.1.4.1.4323.2.7.1.12
               qbAtmPkt 1.3.6.1.4.1.4323.2.7.1.12.1
This traffic descriptor type is to define a connection with an Ethernet endpoint, and it is for a user that does not want to use ATM parameters directly. The EtherNet bandwidth will be converted to a nrtVbr traffic descriptor. The conversion from Ethernet bandwidth to ATM cell rate must add an ATM cell tax. This is defined using the pcbe (packet-to-cell bandwidth expansion) factor. If this is not defined for the traffic descriptor, then the system default (qbAtmDefaultPCBE)should be used. The use of the parameter vector for this type: Parameter 1: minbw, the minimum guarnteed bandwidth fo rthe connection. This is defined in Mb/sec. (0-100). Parameter 2: maxbw, the maximum bursting capability of the connection. This is defined in Mb/sec (1-100). It is default to minbw. Parameter 3: bw, indicates the bandwidth for the PON segment. Vaules are expressed in Mb, and may take interger value between 1 and 100. (only apply to 155Mb PON). It is default to minbw. Parameter 4: pcbe, it defines the packed-to-cell bandwidth expansion. This is the percentage overhead that is used to convert Ethernet bandwidth to ATM cell rates. It is default to qbAtmDefaultPCBE. Parameter 5: not used.
     qbAtmConformance 1.3.6.1.4.1.4323.2.7.2
         qbAtmCompliances 1.3.6.1.4.1.4323.2.7.2.1
             qbAtmCompliance 1.3.6.1.4.1.4323.2.7.2.1.1
The compliance statement for all agents that support this MIB. A compliant agent implements all objects defined in this MIB.
         qbAtmGroups 1.3.6.1.4.1.4323.2.7.2.2
             qbAtmInterfaceConfGroupInfo 1.3.6.1.4.1.4323.2.7.2.2.1
The set of all accessible objects in the Interface group of this MIB.
             qbAtmTrafficDescrParamGroupInfo 1.3.6.1.4.1.4323.2.7.2.2.2
The set of all accessible objects in the Traffic group of this MIB.
             qbAtmVclGroupInfo 1.3.6.1.4.1.4323.2.7.2.2.3
The set of all accessible objects in the VCL group of this MIB.
             qbAtmVplGroupInfo 1.3.6.1.4.1.4323.2.7.2.2.4
The set of all accessible objects in the VPL group of this MIB.
             qbAtmVcCrossConnectGroupInfo 1.3.6.1.4.1.4323.2.7.2.2.5
The set of all accessible objects in the VPL group of this MIB.
             qbAtmVpCrossConnectGroupInfo 1.3.6.1.4.1.4323.2.7.2.2.6
The set of all accessible objects in the VPL group of this MIB.
             qbAtmPnniNodeGroupInfo 1.3.6.1.4.1.4323.2.7.2.2.7
The set of all accessible objects in the VPL group of this MIB.
             qbAtmPnniIfGroupInfo 1.3.6.1.4.1.4323.2.7.2.2.8
The set of all accessible objects in the PNNI interface group of this MIB.
             qbAtmPnniRouteAddrGroupInfo 1.3.6.1.4.1.4323.2.7.2.2.9
The set of all accessible objects in the Route group of this MIB.
             qbAtmInterfaceConfSigGroupInfo 1.3.6.1.4.1.4323.2.7.2.2.10
The set of all accessible objects in the Route group of this MIB.
             qbAtmPnniNbrPeerGroupInfo 1.3.6.1.4.1.4323.2.7.2.2.11
The set of all accessible objects in the PNNI Peer Nbr group of this MIB.
             qbAtmPnniPglGroupInfo 1.3.6.1.4.1.4323.2.7.2.2.12
The set of all accessible objects in the PGL group of this MIB.
             qbAtmPnniTimerGroupInfo 1.3.6.1.4.1.4323.2.7.2.2.13
The set of all accessible objects in the PNNI Timer group of this MIB.
             qbAtmPnniLinkGroupInfo 1.3.6.1.4.1.4323.2.7.2.2.14
The set of all accessible objects in the PNNI Link group of this MIB.
             qbAtmInBandMgtGroupInfo 1.3.6.1.4.1.4323.2.7.2.2.15
The set of all accessible objects in the in-band management group of this MIB.
     qbAtmBaseGroup 1.3.6.1.4.1.4323.2.7.3
         qbAtmF4F5LLID 1.3.6.1.4.1.4323.2.7.3.1 octet string read-write
This object stores Loopback Location ID (LLID).
         qbAtmDefaultPCBE 1.3.6.1.4.1.4323.2.7.3.2 integer read-write
This object stores the default atm cell tax to be used by the system.