PW-MPLS-MIB: View SNMP OID List / Download MIB

VENDOR: INTERNET-STANDARD


 Home MIB: PW-MPLS-MIB
Download as:   
SNMPv2-CONF, IF-MIB, SNMPv2-SMI, PW-TC-MIB, MPLS-TC-MIB, PW-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 pwVcMplsMIB 1.3.6.1.3.888
This MIB complements the PW-MIB for PW operation over MPLS.
         pwVcMplsNotifications 1.3.6.1.3.888.0
             pwVcMplsNotifyPrefix 1.3.6.1.3.888.0.0
         pwVcMplsObjects 1.3.6.1.3.888.1
             pwVcMplsTable 1.3.6.1.3.888.1.1 no-access
This table specifies information for VC to be carried over MPLS PSN.
                 pwVcMplsEntry 1.3.6.1.3.888.1.1.1 no-access
A row in this table represents parameters specific to MPLS PSN for a pseudo wire connection (VC). The row is created automatically by the local agent if the pwVcPsnType is MPLS. It is indexed by pwVcIndex, which uniquely identifying a singular connection.
                     pwVcMplsMplsType 1.3.6.1.3.888.1.1.1.1 bits read-write
Set by the operator to indicate the outer tunnel types, if exists. mplsTe is used if the outer tunnel was set-up by MPLS-TE, and mplsNonTe is used the outer tunnel was set up by LDP or manually. Combination of mplsTe and mplsNonTe may exist in case of outer tunnel protection. vcOnly is used if there is no outer tunnel label. vcOnly cannot be combined with mplsNonTe or mplsTe. Bits: 'mplsNonTe': 1, 'vcOnly': 2, 'mplsTe': 0.
                     pwVcMplsExpBitsMode 1.3.6.1.3.888.1.1.1.2 integer read-write
Set by the operator to indicate the way the VC shim label EXP bits are to be determined. The value of outerTunnel(1) is used where there is an outer tunnel - pwVcMplsMplsType is mplsTe or mplsNonTe. Note that in this case there is no need to mark the VC label with the EXP bits since the VC label is not visible to the intermediate nodes. If there is no outer tunnel, specifiedValue(2) indicate that the value is specified by pwVcMplsExpBits, and serviceDependant(3) indicate that the EXP bits are setup based on a rule specified in the emulated service specific tables, for example when the EXP bits are a function of 802.1p marking for Ethernet emulated service. Enumeration: 'serviceDependant': 3, 'outerTunnel': 1, 'specifiedValue': 2.
                     pwVcMplsExpBits 1.3.6.1.3.888.1.1.1.3 unsigned32 read-write
Set by the operator to indicate the MPLS EXP bits to be used on the VC shim label if pwVcMplsExpBitsMode is specifiedValue(2), zero otherwise.
                     pwVcMplsTtl 1.3.6.1.3.888.1.1.1.4 unsigned32 read-write
Set by the operator to indicate the VC TTL bits to be used on the VC shim label.
                     pwVcMplsLocalLdpID 1.3.6.1.3.888.1.1.1.5 mplsldpidentifier read-write
The local LDP identifier of the LDP entity creating this VC in the local node. As the VC labels are always set from the per platform label space, the last two octets in the LDP ID MUST be always both zeros.
                     pwVcMplsLocalLdpEntityID 1.3.6.1.3.888.1.1.1.6 unsigned32 read-write
The local LDP Entity index of the LDP entity to be used for this VC on the local node. Should be set to all zeros if not used.
                     pwVcMplsPeerLdpID 1.3.6.1.3.888.1.1.1.7 mplsldpidentifier read-only
The peer LDP identifier as identified from the LDP session. Should be zero if not relevant or not known yet.
                     pwVcMplsStorageType 1.3.6.1.3.888.1.1.1.8 storagetype read-write
This variable indicates the storage type for this row.
             pwVcMplsOutboundTable 1.3.6.1.3.888.1.2 no-access
This table associates VCs using MPLS PSN with the outbound MPLS tunnels (i.e. toward the PSN) or the physical interface in case of VC only.
                 pwVcMplsOutboundEntry 1.3.6.1.3.888.1.2.1 no-access
A row in this table represents a link between PW VC (that require MPLS tunnels) and MPLS tunnel toward the PSN. In the case of VC only, it associate the VC with the interface that shall carry the VC. This table is indexed by the pwVcIndex and an additional index enabling multiple rows for the same VC index. At least one entry is created in this table by the agent for each PW VC that requires MPLS PSN. Note that the first entry for each VC can be indexed by pwVcMplsOutboundIndex equal zero without a need for retrieval of pwVcMplsOutboundIndexNext. This table points to the appropriate MPLS MIB. In the case of MPLS-TE, the 4 variables relevant to the indexing of a TE MPLS tunnel are set as in Srinivasan, et al, . In case of Non-TE MPLS (an outer tunnel label assigned by LDP or manually) the table points to the XC entry in the LSR MIB as in Srinivasan, et al, . In case of VC only (no outer tunnel) the ifIndex of the port to carry the VC is configured. Each VC may have multiple rows in this tables if protection is available at the outer tunnel level, each row may be of different type except for VC only, on which only rows with ifIndex of the port are allowed.
                     pwVcMplsOutboundIndex 1.3.6.1.3.888.1.2.1.1 unsigned32 no-access
Arbitrary index for enabling multiple rows per VC in this table. Next available free index can be retrieved using pwVcMplsOutboundIndexNext.
                     pwVcMplsOutboundLsrXcIndex 1.3.6.1.3.888.1.2.1.2 unsigned32 read-only
This object will be set by the operator. If the outer label is defined in the MPL-LSR-MIB, i.e. set by LDP or manually, this object points to the XC index of the outer tunnel. Otherwise, it is set to zero.
                     pwVcMplsOutboundTunnelIndex 1.3.6.1.3.888.1.2.1.3 mplstunnelindex read-only
Part of set of indexes for outbound tunnel in the case of MPLS-TE outer tunnel, otherwise set to zero.
                     pwVcMplsOutboundTunnelInstance 1.3.6.1.3.888.1.2.1.4 mplstunnelinstanceindex read-only
Part of set of indexes for outbound tunnel in the case of MPLS-TE outer tunnel, otherwise set to zero.
                     pwVcMplsOutboundTunnelLclLSR 1.3.6.1.3.888.1.2.1.5 mplslsridentifier read-only
Part of set of indexes for outbound tunnel in the case of MPLS-TE outer tunnel, otherwise set to zero.
                     pwVcMplsOutboundTunnelPeerLSR 1.3.6.1.3.888.1.2.1.6 mplslsridentifier read-only
Part of set of indexes for outbound tunnel in the case of MPLS-TE outer tunnel, otherwise set to zero.
                     pwVcMplsOutboundIfIndex 1.3.6.1.3.888.1.2.1.7 interfaceindexorzero read-only
In case of VC only (no outer tunnel), this object holds the ifIndex of the outbound port, otherwise set to zero.
             pwVcMplsNonTeMappingTable 1.3.6.1.3.888.1.3 no-access
This table maps an outbound Tunnel to a VC in non- TE applications.
                 pwVcMplsNonTeMappingEntry 1.3.6.1.3.888.1.3.1 no-access
A row in this table represents the association between the PW VC and it's non TE MPLS outer Tunnel it's physical interface if there is no outer tunnel (VC only). If the operator (or the agent, based on local policy) want to associate the PW with a non TE tunnel, it create a row in this table with the tunnel parameters and the relevant pwVcIndex. An application can use this table to quickly retrieve the PW carried over specific non-TE MPLS outer tunnel or physical interface. The table in indexed by the XC index for MPLS Non-TE tunnel, or ifIndex of the port in VC only case, the direction of the VC in the specific entry and the VCIndex.
                     pwVcMplsNonTeMappingXcTunnelIndex 1.3.6.1.3.888.1.3.1.1 unsigned32 no-access
Index for the conceptual XC row identifying Tunnel to VC mappings when the outer tunnel is created by the MPLS-LSR- MIB, Zero otherwise.
                     pwVcMplsNonTeMappingIfIndex 1.3.6.1.3.888.1.3.1.2 interfaceindexorzero no-access
In cases where there is only VC label without outer tunnel, this item indicate the ifIndex of the interface this VC would use. In all other cases, this object shgould be set to zero.
                     pwVcMplsNonTeMappingVcIndex 1.3.6.1.3.888.1.3.1.3 pwvcindextype read-only
The value that represent the VC in the pwVcTable.
                     pwVcMplsNonTeMappingRowStatus 1.3.6.1.3.888.1.3.1.4 rowstatus read-only
For creating, modifying, and deleting this row.
                     pwVcMplsNonTeMappingStorageType 1.3.6.1.3.888.1.3.1.5 storagetype read-only
This variable indicates the storage type for this object.
             pwVcMplsTeMappingTable 1.3.6.1.3.888.1.4 no-access
This table maps an inbound/outbound Tunnel to a VC in MPLS-TE applications.
                 pwVcMplsTeMappingEntry 1.3.6.1.3.888.1.4.1 no-access
A row in this table represents the association between a PW VC and it's MPLS-TE outer Tunnel. If the operator (or the agent, based on local policy) want to associate the PW with a non TE tunnel, it create a row in this table with the tunnel parameters and the relevant pwVcIndex. An application can use this table to quickly retrieve the PW carried over specific TE MPLS outer tunnel. The table in indexed by the 4 indexes of a TE tunnel, the direction of the VC specific entry and the VcIndex.
                     pwVcMplsTeMappingTunnelIndex 1.3.6.1.3.888.1.4.1.1 mplstunnelindex no-access
Primary index for the conceptual row identifying the MPLS-TE tunnel.
                     pwVcMplsTeMappingTunnelInstance 1.3.6.1.3.888.1.4.1.2 mplstunnelinstanceindex no-access
Identifies an instance of the MPLS-TE tunnel.
                     pwVcMplsTeMappingTunnelPeerLsrID 1.3.6.1.3.888.1.4.1.3 mplslsridentifier no-access
Identifies an Peer LSR when the outer tunnel is MPLS-TE based.
                     pwVcMplsTeMappingTunnelLocalLsrID 1.3.6.1.3.888.1.4.1.4 mplslsridentifier no-access
Identifies the local LSR.
                     pwVcMplsTeMappingVcIndex 1.3.6.1.3.888.1.4.1.5 pwvcindextype read-only
The value that represent the VC in the pwVcTable.
                     pwVcMplsTeMappingRowStatus 1.3.6.1.3.888.1.4.1.6 rowstatus read-only
For creating, modifying, and deleting this row.
                     pwVcMplsTeMappingStorageType 1.3.6.1.3.888.1.4.1.7 storagetype read-only
This variable indicates the storage type for this object.
         pwVcMplsConformance 1.3.6.1.3.888.2
             pwVcMplsGroups 1.3.6.1.3.888.2.1
                 pwVcMplsGroup 1.3.6.1.3.888.2.1.1
Collection of objects needed for PW VC over MPLS PSN configuration.
                 pwVcMplsOutboundGroup 1.3.6.1.3.888.2.1.2
Collection of objects needed for outbound association of VC and MPLS tunnel.
                 pwVcMplsMappingGroup 1.3.6.1.3.888.2.1.4
Collection of objects used for mapping of tunnels and VC labels to VC index.
             pwVcMplsCompliances 1.3.6.1.3.888.2.2
                 pwMplsModuleCompliance 1.3.6.1.3.888.2.2.1
The compliance statement for agent that support PW over MPLS PSN operation.