PRVT-SWITCH-EFM-OAM-MIB: View SNMP OID List / Download MIB

VENDOR: B.A.T.M. ADVANCE TECHNOLOGIES


 Home MIB: PRVT-SWITCH-EFM-OAM-MIB
Download as:   
SNMPv2-CONF, IF-MIB, SNMPv2-SMI, DOT3-OAM-MIB, Q-BRIDGE-MIB, PRVT-SWITCH-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 prvtSwitchEfmOamMIB 1.3.6.1.4.1.738.1.5.133
This MIB should provide general configuration and reports of this protocol that are not available in the standard DOT3-OAM-MIB, such as Enabling and Timers, as well as the ability to control private extensions added to the EFM OAM.
         prvtEfmOamNotifications 1.3.6.1.4.1.738.1.5.133.0
             prvtOamLoopBackState 1.3.6.1.4.1.738.1.5.133.0.1
This trap should be sent whenever the loopback state has been change from Remote, when dot3OamMode is passive or dot3OamAdminState is disable the interface cannot be on remoteLoopback state and should send this trap.
             prvtOamDyingGasp 1.3.6.1.4.1.738.1.5.133.0.2
The notification alarms for a failure due to loss of local power ('Dying Gasp')
         prvtEfmOamObjects 1.3.6.1.4.1.738.1.5.133.1
             prvtEfmOamEnable 1.3.6.1.4.1.738.1.5.133.1.1 truthvalue read-write
Enable/disable the EFM OAM on the device
             prvtEfmOamMultiPduCount 1.3.6.1.4.1.738.1.5.133.1.2 unsigned32 read-write
Number of OAM PDUs that will be sent when protocol ask to send multiple subsequent messages.
             prvtEfmOamRemoteEvent 1.3.6.1.4.1.738.1.5.133.1.3 truthvalue read-write
Enable or disable sending the local event notifications to the remote device.
             prvtEfmOamLocalSysLog 1.3.6.1.4.1.738.1.5.133.1.4 truthvalue read-write
Disable/enable sending of Event Notification OAM PDU to the local Syslog daemon.
             prvtEfmOamPriority 1.3.6.1.4.1.738.1.5.133.1.5 unsigned32 read-write
Priority of the sent OAM PDUs. Please note that value 8 represents no-priority.
             prvtEfmOamKeepAlive 1.3.6.1.4.1.738.1.5.133.1.6 unsigned32 read-write
Aging interval (in miliseconds)of the last heard neighbouring device.
             prvtEfmOamHelloInterval 1.3.6.1.4.1.738.1.5.133.1.7 unsigned32 read-write
Maximal interval between a pair of PDUs in milliseconds.
             prvtEfmOamPktsSent 1.3.6.1.4.1.738.1.5.133.1.8 unsigned32 read-only
Sent packets.
             prvtEfmOamPktsReceived 1.3.6.1.4.1.738.1.5.133.1.9 unsigned32 read-only
Received packets.
             prvtEfmOamTable 1.3.6.1.4.1.738.1.5.133.1.10 no-access
This table shall containg an entry per physical interface, indexed by the corresponding ifIndex from IF-MIB and each row in the table shall contain a single column.
                   prvtEfmOamEntry 1.3.6.1.4.1.738.1.5.133.1.10.1 no-access
EFM Entry
                       prvtEfmOamEnhanceMode 1.3.6.1.4.1.738.1.5.133.1.10.1.1 integer read-write
Used to be used to enable or disable EFM-OAM Vendor specific extensions on the specific interface. Values are : - basic(1) - no Vendor specific OAM extensions are used. - enhance(2) - when the remote device is detected as Vendor device, enhanced mode is used. Enumeration: 'enhance': 2, 'basic': 1.
                       prvtEfmOamEventReturn 1.3.6.1.4.1.738.1.5.133.1.10.1.2 integer32 read-write
0 - feature is disabled (default value) 1-10 - feature is enabled. The number specifies how many handshaking attempts will be done before shutting down the port.
                       prvtEfmOamForceLoopbackLocal 1.3.6.1.4.1.738.1.5.133.1.10.1.3 truthvalue read-write
Used to force permanent loopback configuration on the local side. This is used for loopback traffic analysis for long term (for example, 24 hours length infrastructure testing).
                       prvtEfmOamForceLoopbackRemote 1.3.6.1.4.1.738.1.5.133.1.10.1.4 truthvalue read-write
Used to force permanent loopback configuration on the remote side. This is used for loopback traffic analysis for long term (for example, 24 hours length infrastructure testing).
                       prvtEfmOamEventForwardStatus 1.3.6.1.4.1.738.1.5.133.1.10.1.5 portlist read-write
Forward a Link EventNotification on the specified target interface. Note that the interface which will forward the EventNotification must have efm-oam mode enabled.
                       prvtEfmOamEventForwardShutdown 1.3.6.1.4.1.738.1.5.133.1.10.1.6 portlist read-write
Shutdown a specified target interface as a result of the current interface status change.
             prvtEfmOamPing 1.3.6.1.4.1.738.1.5.133.1.11
                   prvtEfmOamPingTable 1.3.6.1.4.1.738.1.5.133.1.11.1 no-access
This table let the EFM-OAM non-intrusive monitoring on the specific interface by querying a number of time aFramesTransmittedOK parameter, ping requests, using the variable retrieval EFM OAM PDU.
                       prvtEfmOamPingEntry 1.3.6.1.4.1.738.1.5.133.1.11.1.1 no-access
                           prvtEfmOamPingEchoNumber 1.3.6.1.4.1.738.1.5.133.1.11.1.1.1 unsigned32 read-write
The number of echo packets to send.
                           prvtEfmOamPingDelayTime 1.3.6.1.4.1.738.1.5.133.1.11.1.1.2 unsigned32 read-write
The delay in seconds between packets.
                           prvtEfmOamPingTimeOut 1.3.6.1.4.1.738.1.5.133.1.11.1.1.3 unsigned32 read-write
The time in seconds which the ping should wait for the response.
                           prvtEfmOamPingCounterBranch 1.3.6.1.4.1.738.1.5.133.1.11.1.1.4 integer read-write
Set/get the counter of ping-like operation. Enumeration: 'branch': 7.
                           prvtEfmOamPingCounterLeaf 1.3.6.1.4.1.738.1.5.133.1.11.1.1.5 integer read-write
Set/get the counter of ping-like operation. Enumeration: 'framesReceivedOK': 5, 'multicastFramesReceivedOK': 21, 'framesTransmittedOK': 2, 'broadcastFramesReceivedOK': 22, 'octetsTransmittedOK': 8, 'octetsReceivedOK': 14.
                           prvtEfmOamPingRowStatus 1.3.6.1.4.1.738.1.5.133.1.11.1.1.6 rowstatus read-only
Creation/delete/edit of the ping test.
                   prvtEfmOamPingResultTable 1.3.6.1.4.1.738.1.5.133.1.11.2 no-access
Ping results.
                       prvtEfmOamPingResultEntry 1.3.6.1.4.1.738.1.5.133.1.11.2.1 no-access
                           prvtEfmOamPingResultStatus 1.3.6.1.4.1.738.1.5.133.1.11.2.1.1 integer read-only
Current ping operation status. Enumeration: 'terminated': 3, 'running': 2, 'noPing': 1.
                           prvtEfmOamPingResultSentPackets 1.3.6.1.4.1.738.1.5.133.1.11.2.1.2 counter32 read-only
Sent packets
                           prvtEfmOamPingResultReceivedPackets 1.3.6.1.4.1.738.1.5.133.1.11.2.1.3 counter32 read-only
Received packets
                           prvtEfmOamPingResultRcvRateInteger 1.3.6.1.4.1.738.1.5.133.1.11.2.1.4 unsigned32 read-only
Ping receive rate - Integer part
                           prvtEfmOamPingResultRcvRateFractional 1.3.6.1.4.1.738.1.5.133.1.11.2.1.5 unsigned32 read-only
Ping receive rate - Fractional part
                           prvtEfmOamPingResultTimeMin 1.3.6.1.4.1.738.1.5.133.1.11.2.1.6 unsigned32 read-only
Ping minimum time.
                           prvtEfmOamPingResultTimeMax 1.3.6.1.4.1.738.1.5.133.1.11.2.1.7 unsigned32 read-only
Ping maximum time.
                           prvtEfmOamPingResultAverageTimeInteger 1.3.6.1.4.1.738.1.5.133.1.11.2.1.8 unsigned32 read-only
Ping average time - Integer part.
                           prvtEfmOamPingResultAverageTimeFractional 1.3.6.1.4.1.738.1.5.133.1.11.2.1.9 unsigned32 read-only
Ping average time - Fractional part.
                           prvtEfmOamPingResultClear 1.3.6.1.4.1.738.1.5.133.1.11.2.1.10 integer read-write
Deleteper interface entries in prvtEfmOamPingResultTable. Enumeration: 'none': 0, 'clear': 1.
             prvtEfmOamLoopback 1.3.6.1.4.1.738.1.5.133.1.12
                   prvtEfmOamLoopbackTable 1.3.6.1.4.1.738.1.5.133.1.12.1 no-access
This table should permit to perform EFM-OAM intrusive monitoring on the specific interface by setting the remote device into loopback state and generating test traffic. It should support: Storm operation, an operation that sets remote loopback, stops local data flow to the remote box and generates a packet burst by CPU. When the burst is received back it is validated and statistics are displayed. Burst operation, an operation that sets remote loopback, stops local data flow to the remote box and generates a packet test burst by the hardware (when available). It means a single packet generated by CPU is repetitively sent by the hardware. When the burst is received back it is ignored and only counters are displayed.
                       prvtEfmOamLoopbackEntry 1.3.6.1.4.1.738.1.5.133.1.12.1.1 no-access
                           prvtEfmOamLoopbackOperation 1.3.6.1.4.1.738.1.5.133.1.12.1.1.1 integer read-write
Represent the operation that the should be performed on the interface. Enumeration: 'storm': 1, 'burst': 2.
                           prvtEfmOamLoopbackDuration 1.3.6.1.4.1.738.1.5.133.1.12.1.1.2 unsigned32 read-write
Represent the amount of time burst test should run in seconds.
                           prvtEfmOamLoopbackCount 1.3.6.1.4.1.738.1.5.133.1.12.1.1.3 unsigned32 read-write
Represent the count of packets to send in storm operation.
                           prvtEfmOamLoopbackPacketSize 1.3.6.1.4.1.738.1.5.133.1.12.1.1.4 unsigned32 read-write
Represent the size of the test packet to use.
                           prvtEfmOamLoopbackDelay 1.3.6.1.4.1.738.1.5.133.1.12.1.1.5 unsigned32 read-write
Represent the delay between packets in seconds. The default value is 0 and represents no delay.
                           prvtEfmOamLoopbackTimeout 1.3.6.1.4.1.738.1.5.133.1.12.1.1.6 unsigned32 read-write
Represent the wait for response in seconds.
                           prvtEfmOamLoopbackNoRemote 1.3.6.1.4.1.738.1.5.133.1.12.1.1.7 truthvalue read-write
Add or not remote to loopback.
                           prvtEfmOamLoopbackRowStatus 1.3.6.1.4.1.738.1.5.133.1.12.1.1.8 rowstatus read-only
                   prvtEfmOamLoopbackResultTable 1.3.6.1.4.1.738.1.5.133.1.12.2 no-access
Loopback results.
                       prvtEfmOamLoopbackResultEntry 1.3.6.1.4.1.738.1.5.133.1.12.2.1 no-access
                           prvtEfmOamLoopbackResultStatus 1.3.6.1.4.1.738.1.5.133.1.12.2.1.1 integer read-only
Loopback result status Enumeration: 'terminated': 6, 'stopCmdSent': 5, 'startFail': 3, 'noLoopback': 1, 'remoteFailure': 7, 'startCmdSent': 2, 'dataStarted': 4.
                           prvtEfmOamLoopbackResultFlood 1.3.6.1.4.1.738.1.5.133.1.12.2.1.2 integer read-only
Flood value
                           prvtEfmOamLoopbackResultSentPackets 1.3.6.1.4.1.738.1.5.133.1.12.2.1.3 counter32 read-only
Sent packets
                           prvtEfmOamLoopbackResultReceivedPackets 1.3.6.1.4.1.738.1.5.133.1.12.2.1.4 counter32 read-only
Received packets
                           prvtEfmOamLoopbackResultClear 1.3.6.1.4.1.738.1.5.133.1.12.2.1.5 integer read-write
Delete per interface entries in prvtEfmOamLoopbackResultTable. Enumeration: 'none': 0, 'clear': 1.
             prvtEfmOamPeerTable 1.3.6.1.4.1.738.1.5.133.1.13 no-access
This table holds the peer extended information available only when local interface is set in enhanced mode (see prvtOamEnhanceMode) and the remote is detected as enhanced-mode device. This table shall containg an entry per physical interface, indexed by the corresponding ifIndex from IF-MIB.
                   prvtEfmOamPeerEntry 1.3.6.1.4.1.738.1.5.133.1.13.1 no-access
                       prvtEfmOamPeerPort 1.3.6.1.4.1.738.1.5.133.1.13.1.1 displaystring read-only
Holds the peer port name as string as it is sent by the peer (eg: 1/2/1).
                       prvtEfmOamPeerName 1.3.6.1.4.1.738.1.5.133.1.13.1.2 displaystring read-only
Holds the peer hostname s string as it is sent by the peer.
             prvtEfmOamHistorySize 1.3.6.1.4.1.738.1.5.133.1.14 unsigned32 read-write
Number of entries in EFM_OAM history.
         prvtEfmOamConformance 1.3.6.1.4.1.738.1.5.133.2