PRVT-SAA-MIB: View SNMP OID List / Download MIB

VENDOR: B.A.T.M. ADVANCE TECHNOLOGIES


 Home MIB: PRVT-SAA-MIB
Download as:   
SNMPv2-CONF, SNMP-FRAMEWORK-MIB, SNMPv2-SMI, PRVT-SWITCH-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 prvtSaaMib 1.3.6.1.4.1.738.1.5.130
This MIB provides the extended capability of controlling and provisioning various OAM tests and SAA monitoring. It adds extra functionality for DISMAN-PING-MIB
         prvtSaaNotifications 1.3.6.1.4.1.738.1.5.130.0
             prvtSaaRFC2544ProbeFailed 1.3.6.1.4.1.738.1.5.130.0.1
This trap should be sent whenever a SAA probe on a specific test fails.
             prvtSaaRFC2544ProbeSuccess 1.3.6.1.4.1.738.1.5.130.0.2
This trap should be sent whenever a SAA probe on a specific test finishes with success.
             prvtSaaRFC2544TestFinished 1.3.6.1.4.1.738.1.5.130.0.3
This trap should be sent whenever a SAA RFC2544 test is finished
             prvtSaaY1731DelayNEThreshold 1.3.6.1.4.1.738.1.5.130.0.4
This trap should be sent whenever the near end delay on a SAA Y1731 test will surpass one of the 2 defined thresholds.
             prvtSaaY1731DelayFEThreshold 1.3.6.1.4.1.738.1.5.130.0.5
This trap should be sent whenever the far end delay on a SAA Y1731 test will surpass one of the 2 defined thresholds.
             prvtSaaY1731JitterNEThreshold 1.3.6.1.4.1.738.1.5.130.0.6
This trap should be sent whenever the near end jitter on a SAA Y1731 test will surpass one of the 2 defined thresholds.
             prvtSaaY1731JitterFEThreshold 1.3.6.1.4.1.738.1.5.130.0.7
This trap should be sent whenever the far end jitter on a SAA Y1731 test will surpass one of the 2 defined thresholds.
             prvtSaaY1731FrLossNEThreshold 1.3.6.1.4.1.738.1.5.130.0.8
This trap should be sent whenever the near end frameloss on a SAA Y1731 test will surpass one of the 2 defined thresholds.
             prvtSaaY1731FrLossFEThreshold 1.3.6.1.4.1.738.1.5.130.0.9
This trap should be sent whenever the far end frameloss on a SAA Y1731 test will surpass one of the 2 defined thresholds.
         prvtSaaObjects 1.3.6.1.4.1.738.1.5.130.1
             prvtSaaTest 1.3.6.1.4.1.738.1.5.130.1.1
                 prvtSaaY1731PmTestTable 1.3.6.1.4.1.738.1.5.130.1.1.1 no-access
This table holds the configuration for a SAA Y1731 test
                     prvtSaaY1731PmTestEntry 1.3.6.1.4.1.738.1.5.130.1.1.1.1 no-access
NONE
                         prvtSaaY1731PmTestOwner 1.3.6.1.4.1.738.1.5.130.1.1.1.1.1 snmpadminstring no-access
This string is used to describe the owner of the Y1731 Pm SAA test.
                         prvtSaaY1731PmTestName 1.3.6.1.4.1.738.1.5.130.1.1.1.1.2 snmpadminstring no-access
This string is used to describe the test name for the Y1731 Pm SAA test. It is also used as a test identifier.
                         prvtSaaY1731PmTestType 1.3.6.1.4.1.738.1.5.130.1.1.1.1.3 integer read-write
SAA Y1731 Pm test type. Enumeration: 'framedelayAndDelayvariation': 2, 'framelossAndFramedelayAndDelayvariation': 3, 'frameloss': 1.
                         prvtSaaY1731PmTestExecStatus 1.3.6.1.4.1.738.1.5.130.1.1.1.1.4 integer read-only
SAA Y1731 Pm test execution status. Enumeration: 'notRunning': 1, 'running': 2.
                         prvtSaaY1731PmTestEncapType 1.3.6.1.4.1.738.1.5.130.1.1.1.1.5 integer read-write
SAA Y1731 Pm test encapsulation type. It can be either test over VLAN or test over Service. The value 1 is the default value representing that neither type is set. Enumeration: 'none': 1, 'vlan': 3, 'service': 2.
                         prvtSaaY1731PmTestEncapValue 1.3.6.1.4.1.738.1.5.130.1.1.1.1.6 unsigned32 read-write
The value of the defined SAA Y1731 Pm test encapsulation. It should be either the Vlan ID or the Service ID, depending on the type set in prvtSaaY1731PmTestEncapType.
                         prvtSaaY1731PmTestUserPort 1.3.6.1.4.1.738.1.5.130.1.1.1.1.7 unsigned32 read-write
For SAA Y1731 Pm test, this leaf is used only in case the encapsulation is VLAN type and it determines the port on which the user is connected.
                         prvtSaaY1731PmTestUplinkPort 1.3.6.1.4.1.738.1.5.130.1.1.1.1.8 unsigned32 read-write
For SAA Y1731 Pm test, this leaf is used only in case the encapsulation is VLAN type and it determines the port that the SAA test devices are connected through.
                         prvtSaaY1731PmTestTargetMac 1.3.6.1.4.1.738.1.5.130.1.1.1.1.9 displaystring read-write
The target MAC address for the SAA Y1731 test.
                         prvtSaaY1731PmTestCfmDomainLevel 1.3.6.1.4.1.738.1.5.130.1.1.1.1.10 unsigned32 read-write
CFM Domain level on which the test will be run.
                         prvtSaaY1731PmTestRemoteCfmMep 1.3.6.1.4.1.738.1.5.130.1.1.1.1.11 unsigned32 read-write
The remote MEP associated with target MAC.
                         prvtSaaY1731PmTestProfile 1.3.6.1.4.1.738.1.5.130.1.1.1.1.12 unsigned32 read-write
The profile ID associated to the SAA Y1731 Pm test. A value of 0 depicts no set profile.
                         prvtSaaY1731PmTestHistoryDepth 1.3.6.1.4.1.738.1.5.130.1.1.1.1.13 unsigned32 read-write
Probe history count.
                         prvtSaaY1731PmTestPeriod 1.3.6.1.4.1.738.1.5.130.1.1.1.1.14 unsigned32 read-write
The period the SAA Y1731 Pm test will run, in milliseconds.
                         prvtSaaY1731PmTestTimeout 1.3.6.1.4.1.738.1.5.130.1.1.1.1.15 unsigned32 read-write
The timeout period for a test packet.
                         prvtSaaY1731PmTestMonitorInterval 1.3.6.1.4.1.738.1.5.130.1.1.1.1.16 unsigned32 read-write
Monitoring interval is relevant only for continous Y1731 test. It is measured in minutes.
                         prvtSaaY1731PmTestFrequency 1.3.6.1.4.1.738.1.5.130.1.1.1.1.17 unsigned32 read-write
The time between two consecutive intervals. A value of 1 defines a delay of a second between the end of the first and the begining of the next interval.
                         prvtSaaY1731PmTestClocksInSync 1.3.6.1.4.1.738.1.5.130.1.1.1.1.18 truthvalue read-write
This variable tells if the clocks of the test are syncronized.
                         prvtSaaY1731PmTestDelayMethod 1.3.6.1.4.1.738.1.5.130.1.1.1.1.19 integer read-write
Defines the method of calculating delay on a Y1731 test. Enumeration: 'average': 1, 'percentile': 2.
                         prvtSaaY1731PmTestDelayPvalue 1.3.6.1.4.1.738.1.5.130.1.1.1.1.20 unsigned32 read-write
Percent used to calculate delay in p-percentile method. Reported delay is the percent-th member in the array with sorted delays. Relevant only for p-percentile method. Value in range of 1-100 is for percentile delay method of calculation. Value 101 describes that average delay method of calculation is used. Only values inside the 1..100 range can be set to this parameter.
                         prvtSaaY1731PmTestJitterMethod 1.3.6.1.4.1.738.1.5.130.1.1.1.1.21 integer read-write
Defines the method of calculating jitter on a Y1731 test. Enumeration: 'variance': 2, 'percentile': 3, 'peakToPeak': 1.
                         prvtSaaY1731PmTestJitterPvalue 1.3.6.1.4.1.738.1.5.130.1.1.1.1.22 unsigned32 read-write
Percent used to calculate jitter in p-percentile method. Reported jitter is the percent-th member in the array with sorted jitters. Relevant only for p-percentile method. Value in range of 1..100 is for percentile jitter method of calculation. Value 101 describes that peakToPeak jitter method of calculation is used. Value 102 describes that variance jitter method of calculation is used. Only values inside the 1..100 range can be set to this parameter.
                         prvtSaaY1731PmTestPriority 1.3.6.1.4.1.738.1.5.130.1.1.1.1.23 unsigned32 read-write
Defines the priority of the packets sent by the SAA Y1731 Pm test (priority to count user traffic).
                         prvtSaaY1731PmTestRowStatus 1.3.6.1.4.1.738.1.5.130.1.1.1.1.24 rowstatus read-only
The status of the row. The writable columns in a row can not be changed if the row is active. Certain columns must have a valid value before a row can be activated.
                         prvtSaaY1731PmTestCCMAPSCount 1.3.6.1.4.1.738.1.5.130.1.1.1.1.25 truthvalue read-write
Determines whether to include proactive OAM frames for ETH-CC and ETH-APS in loss measurement counters or not.
                         prvtSaaY1731PmTestLossMeasurementType 1.3.6.1.4.1.738.1.5.130.1.1.1.1.26 integer read-write
If set to 1 Synthetic Loss Measurement will be used for frame-loss calculations.If set 0 user packets will be used for frame-loss calculations Enumeration: 'slm': 1, 'lmm': 0.
                         prvtSaaY1731PmTestSLMTransmit 1.3.6.1.4.1.738.1.5.130.1.1.1.1.27 truthvalue read-write
If set true the device is capable of sending SLM packets and frame-loss calculations. This must be used only when loss measurement type is SLM
                         prvtSaaY1731PmTestTestId 1.3.6.1.4.1.738.1.5.130.1.1.1.1.28 unsigned32 read-write
Specify the unique test id used in Y1731 SLM. 0 means not set.It is mandatory for the Y1731 SLM test
                         prvtSaaY1731PmTestDropEligible 1.3.6.1.4.1.738.1.5.130.1.1.1.1.29 truthvalue read-write
Drop Eligible flag for S-VLAN used for the Y1731 SLM test.
                         prvtSaaY1731PmTestDataSize 1.3.6.1.4.1.738.1.5.130.1.1.1.1.30 unsigned32 read-write
Packet sizes for Y1731 SLM test
                         prvtSaaY1731PmTestCountAllPriorities 1.3.6.1.4.1.738.1.5.130.1.1.1.1.31 truthvalue read-write
Measure for all priorities.
                 prvtSaaRFC2544ThroughputTestTable 1.3.6.1.4.1.738.1.5.130.1.1.2 no-access
This table holds the configuration for a SAA RFC2544 test
                     prvtSaaRFC2544ThroughputTestEntry 1.3.6.1.4.1.738.1.5.130.1.1.2.1 no-access
NONE
                         prvtSaaRFC2544ThroughputTestOwner 1.3.6.1.4.1.738.1.5.130.1.1.2.1.1 snmpadminstring no-access
This string is used to describe the owner of the RFC2544 SAA test.
                         prvtSaaRFC2544ThroughputTestName 1.3.6.1.4.1.738.1.5.130.1.1.2.1.2 snmpadminstring no-access
This string is used to describe the test name for the RFC2544 SAA test. It is also used as a test identifier.
                         prvtSaaRFC2544ThroughputTestType 1.3.6.1.4.1.738.1.5.130.1.1.2.1.3 integer read-write
SAA RFC2544 Throughput test type Enumeration: 'testTail': 3, 'unidirectionalTestHead': 1, 'bidirectionalTestHead': 2, 'testLoopback': 4.
                         prvtSaaRFC2544ThroughputTestExecStatus 1.3.6.1.4.1.738.1.5.130.1.1.2.1.4 integer read-only
SAA RFC2544 Throughput test execution status. Enumeration: 'notRunning': 1, 'running': 2.
                         prvtSaaRFC2544ThroughputTestSourceType 1.3.6.1.4.1.738.1.5.130.1.1.2.1.5 integer read-only
SAA RFC2544 Throughput test source type. Enumeration: 'none': 0, 'mac': 1, 'mep': 2.
                         prvtSaaRFC2544ThroughputTestSource 1.3.6.1.4.1.738.1.5.130.1.1.2.1.6 octet string read-only
String that holds either the MAC or the MEP ID. MAC should be in the format AA:BB:CC:DD:EE:FF MEP shold be in the format DOMAIN:MA:MEP that represent the values corresponding to dot1agCfmMdIndex, dot1agCfmMaIndex and dot1agCfmMepIdentifier from IEEE8021-CFM-MIB. e.g.: MAC: 00:A0:12:5C:12:C0 MEP: 1:1:2
                         prvtSaaRFC2544ThroughputTestTargetType 1.3.6.1.4.1.738.1.5.130.1.1.2.1.7 integer read-only
SAA RFC2544 Throughput test target type. Enumeration: 'none': 0, 'mac': 1, 'mep': 2.
                         prvtSaaRFC2544ThroughputTestTarget 1.3.6.1.4.1.738.1.5.130.1.1.2.1.8 octet string read-only
String that holds either the MAC or the MEP ID. MAC should be in the format AA:BB:CC:DD:EE:FF MEP shold be in the format DOMAIN:MA:MEP that represent the values corresponding to dot1agCfmMdIndex, dot1agCfmMaIndex and dot1agCfmMepIdentifier from IEEE8021-CFM-MIB. e.g.: MAC: 00:A0:12:5C:12:C0 MEP: 1:1:2
                         prvtSaaRFC2544ThroughputTestTimeout 1.3.6.1.4.1.738.1.5.130.1.1.2.1.9 unsigned32 read-write
SAA RFC2544 Throughput test timeout, in 0.1 of a second increments
                         prvtSaaRFC2544ThroughputTestCIR 1.3.6.1.4.1.738.1.5.130.1.1.2.1.10 unsigned32 read-write
SAA RFC2544 Throughput Committed Information Rate (CIR) value.
                         prvtSaaRFC2544ThroughputTestCBS 1.3.6.1.4.1.738.1.5.130.1.1.2.1.11 unsigned32 read-write
SAA RFC2544 Throughput Committed Burst Size (CBS) value.
                         prvtSaaRFC2544ThroughputTestBurstPercentage 1.3.6.1.4.1.738.1.5.130.1.1.2.1.12 unsigned32 read-write
Part of CIR to use for bursts(CBS).
                         prvtSaaRFC2544ThroughputTestDuration 1.3.6.1.4.1.738.1.5.130.1.1.2.1.13 unsigned32 read-write
The SAA RFC2544 Throughput test duration, in seconds.
                         prvtSaaRFC2544ThroughputTestMaxFrameloss 1.3.6.1.4.1.738.1.5.130.1.1.2.1.14 unsigned32 read-write
The maximum frameloss to declare a successful SAA RFC2544 Throughput test in 0.001 of a percent.
                         prvtSaaRFC2544ThroughputTestCVLAN0 1.3.6.1.4.1.738.1.5.130.1.1.2.1.15 unsigned32 read-write
C-VLAN ID for the SAA RFC2544 Throughput test.
                         prvtSaaRFC2544ThroughputTestCVLAN0Priority 1.3.6.1.4.1.738.1.5.130.1.1.2.1.16 unsigned32 read-write
VPT for C-VLAN0 for the SAA RFC2544 Throughput test.
                         prvtSaaRFC2544ThroughputTestCVLAN0DropEligible 1.3.6.1.4.1.738.1.5.130.1.1.2.1.17 truthvalue read-write
Drop Eligible flag for C-VLAN0 for the SAA RFC2544 Throughput test.
                         prvtSaaRFC2544ThroughputTestSVLAN 1.3.6.1.4.1.738.1.5.130.1.1.2.1.18 unsigned32 read-only
S-VLAN ID for the SAA RFC2544 Throughput test.
                         prvtSaaRFC2544ThroughputTestSVLANPriority 1.3.6.1.4.1.738.1.5.130.1.1.2.1.19 unsigned32 read-write
VPT for S-VLAN0 for the SAA RFC2544 Throughput test.
                         prvtSaaRFC2544ThroughputTestSVLANDropEligible 1.3.6.1.4.1.738.1.5.130.1.1.2.1.20 truthvalue read-write
Drop Eligible flag for S-VLAN0 for the SAA RFC2544 Throughput test.
                         prvtSaaRFC2544ThroughputTestPDUSize 1.3.6.1.4.1.738.1.5.130.1.1.2.1.21 displaystring read-write
Bitmask with predefined packet sizes for SAA RFC2544 Throughput test: 64, 128, 256, 512, 1024, 1280, 1518, 1530, 2000, 9000 (LSB set=64...10th bit set =9000)
                         prvtSaaRFC2544ThroughputTestACKTimeout 1.3.6.1.4.1.738.1.5.130.1.1.2.1.22 unsigned32 read-write
Defines the timeout for a SAA RFC2544 Throughput test tail to send an ACK MCC.
                         prvtSaaRFC2544ThroughputTestLoopbackType 1.3.6.1.4.1.738.1.5.130.1.1.2.1.23 integer read-write
SAA RFC2544 Throughput test loopback type. Enumeration: 'oam': 2, 'macSwap': 1.
                         prvtSaaRFC2544ThroughputTestPaternType 1.3.6.1.4.1.738.1.5.130.1.1.2.1.24 integer read-write
SAA RFC2544 Throughput test patern type. Options for it are none, null, null-crc, prbs, prbs-crc. Enumeration: 'nullCRC': 2, 'none': 8, 'null': 1, 'prbsCRC': 4, 'prbs': 3.
                         prvtSaaRFC2544ThroughputTestRowStatus 1.3.6.1.4.1.738.1.5.130.1.1.2.1.25 rowstatus read-only
The status of the row entry. The writable columns in a row can not be changed if the row is active. Certain columns must have a valid value before a row can be activated.
                         prvtSaaRFC2544ThroughputTestEthertype 1.3.6.1.4.1.738.1.5.130.1.1.2.1.26 octet string read-only
SAA RFC2544 Throughput test Ethertype.
                 prvtSaaY1731LoopbackTestTable 1.3.6.1.4.1.738.1.5.130.1.1.3 no-access
This table holds the configuration for a SAA Y1731 Loopback test. It describes the FPGA configuration.
                     prvtSaaY1731LoopbackTestEntry 1.3.6.1.4.1.738.1.5.130.1.1.3.1 no-access
NONE
                         prvtSaaY1731LoopbackTestEncapType 1.3.6.1.4.1.738.1.5.130.1.1.3.1.1 integer no-access
SAA Y1731 Loopback test encapsulation type. It can be either test over VLAN or test over Service. The value 1 is the default value representing that neither type is set. Enumeration: 'vlan': 2, 'service': 1.
                         prvtSaaY1731LoopbackTestEncapValue 1.3.6.1.4.1.738.1.5.130.1.1.3.1.2 unsigned32 no-access
The value of the defined SAA Y1731 Lopback test encapsulation. It should be either the Vlan ID or the Service ID, depending on the type set in prvtSaaY1731LoopbackTestEncapType.
                         prvtSaaY1731LoopbackTestUserPort 1.3.6.1.4.1.738.1.5.130.1.1.3.1.3 unsigned32 read-write
For SAA Y1731 Loopback test, this leaf is used only in case the encapsulation is VLAN type and it determines the port on which the user is connected.
                         prvtSaaY1731LoopbackTestUplinkPort 1.3.6.1.4.1.738.1.5.130.1.1.3.1.4 unsigned32 read-write
For SAA Y1731 Loopback test, this leaf is used only in case the encapsulation is VLAN type and it determines the port that the SAA test devices are connected through.
                         prvtSaaY1731LoopbackTestType 1.3.6.1.4.1.738.1.5.130.1.1.3.1.5 integer read-write
SAA Y1731 Loopback test type. Specifies the test being perfoer Enumeration: 'none': 1, 'framelossAndDelayvariation': 4, 'delayvariation': 3, 'frameloss': 2.
                         prvtSaaY1731LoopbackTestRowStatus 1.3.6.1.4.1.738.1.5.130.1.1.3.1.6 rowstatus read-only
The status of the row entry. The writable columns in a row can not be changed if the row is active. Certain columns must have a valid value before a row can be activated.
                         prvtSaaY1731LoopbackTestCCMAPSCount 1.3.6.1.4.1.738.1.5.130.1.1.3.1.7 truthvalue read-write
Determines whether to include proactive OAM frames for ETH-CC and ETH-APS in loss measurement counters or not.
                         prvtSaaY1731LoopbackTestCountAllPriorities 1.3.6.1.4.1.738.1.5.130.1.1.3.1.8 truthvalue read-write
Determines whether to count all packets ignoring the priority.
             prvtSaaTestResult 1.3.6.1.4.1.738.1.5.130.1.2
                 prvtSaaY1731TestResultTable 1.3.6.1.4.1.738.1.5.130.1.2.1 no-access
This table contains SAA results for Y1731 tests.
                     prvtSaaY1731TestResultEntry 1.3.6.1.4.1.738.1.5.130.1.2.1.1 no-access
NONE
                         prvtSaaY1731TestResultIndex 1.3.6.1.4.1.738.1.5.130.1.2.1.1.1 unsigned32 no-access
SAA Y1731 test results table index
                         prvtSaaY1731TestResultDelayNE 1.3.6.1.4.1.738.1.5.130.1.2.1.1.2 unsigned32 read-only
Near end delay result in 0.01 of a microsecond
                         prvtSaaY1731TestResultDelayFE 1.3.6.1.4.1.738.1.5.130.1.2.1.1.3 unsigned32 read-only
Far end delay result in 0.01 of a microsecond
                         prvtSaaY1731TestResultJitterNE 1.3.6.1.4.1.738.1.5.130.1.2.1.1.4 unsigned32 read-only
Near end jitter result in 0.01 of a microsecond
                         prvtSaaY1731TestResultJitterFE 1.3.6.1.4.1.738.1.5.130.1.2.1.1.5 unsigned32 read-only
Far end jitter result in 0.01 of a microsecond
                         prvtSaaY1731TestResultFrameLossNE 1.3.6.1.4.1.738.1.5.130.1.2.1.1.6 unsigned32 read-only
Near end frame-loss result in 0.0000001 of a percent
                         prvtSaaY1731TestResultFrameLossFE 1.3.6.1.4.1.738.1.5.130.1.2.1.1.7 unsigned32 read-only
Far end frame-loss result in 0.0000001 of a percent
                         prvtSaaY1731TestResultFramesSentNE 1.3.6.1.4.1.738.1.5.130.1.2.1.1.8 counter32 read-only
Near end sent frames
                         prvtSaaY1731TestResultFramesSentFE 1.3.6.1.4.1.738.1.5.130.1.2.1.1.9 counter32 read-only
Far end sent frames
                         prvtSaaY1731TestResultFramesRcvdNE 1.3.6.1.4.1.738.1.5.130.1.2.1.1.10 counter32 read-only
Near end received frames
                         prvtSaaY1731TestResultFramesRcvdFE 1.3.6.1.4.1.738.1.5.130.1.2.1.1.11 counter32 read-only
Far end received frames
                         prvtSaaY1731TestResultPacketsSent 1.3.6.1.4.1.738.1.5.130.1.2.1.1.12 counter32 read-only
The test packets sent between devices
                         prvtSaaY1731TestResultNoTimeouts 1.3.6.1.4.1.738.1.5.130.1.2.1.1.13 unsigned32 read-only
Number of timeouts for the SAA Y1731 Pm test
                         prvtSaaY1731TestResultNoErrors 1.3.6.1.4.1.738.1.5.130.1.2.1.1.14 unsigned32 read-only
Number of errors for the SAA Y1731 Pm test
                         prvtSaaY1731TestResultCompletionTime 1.3.6.1.4.1.738.1.5.130.1.2.1.1.15 unsigned32 read-only
Completion time in seconds for the SAA Y1731 PM test.
                 prvtSaaRFC2544TestResultTable 1.3.6.1.4.1.738.1.5.130.1.2.2 no-access
This table contains SAA results for RFC2544 tests.
                     prvtSaaRFC2544TestResultEntry 1.3.6.1.4.1.738.1.5.130.1.2.2.1 no-access
NONE
                         prvtSaaRFC2544TestResultIndex 1.3.6.1.4.1.738.1.5.130.1.2.2.1.1 unsigned32 no-access
SAA RFC2544 Throughput test results table index. Index will take values 1 to 9, each value representing a frame size from this list: 64, 128, 256, 512, 1024, 1280, 1518, 2000, 9000. The leaf prvtSaaRFC2544TestResultFrameSize will present this value in a more user-friendly way.
                         prvtSaaRFC2544TestResultFrameSize 1.3.6.1.4.1.738.1.5.130.1.2.2.1.2 unsigned32 read-only
Frame size of the SAA RFC2544 test. Possible values are: 64, 128, 256, 512, 1024, 1280, 1518, 2000, 9000
                         prvtSaaRFC2544TestResultFrameLoss 1.3.6.1.4.1.738.1.5.130.1.2.2.1.3 unsigned32 read-only
Frame loss of the SAA RFC2544 test measured in 0.001 of a percent
                         prvtSaaRFC2544TestResultThroughput 1.3.6.1.4.1.738.1.5.130.1.2.2.1.4 unsigned32 read-only
Throughput of the SAA RFC2544 test measured in Kbps
                         prvtSaaRFC2544TestResultNetThroughput 1.3.6.1.4.1.738.1.5.130.1.2.2.1.5 unsigned32 read-only
The actual throughput of the SAA RFC2544 test containing only user data. It is measured in Kbps.
                         prvtSaaRFC2544TestResultStatus 1.3.6.1.4.1.738.1.5.130.1.2.2.1.6 integer read-only
Status of the SAA RFC2544 test Enumeration: 'notAvailable': 1, 'ready': 2, 'error': 3.
                         prvtSaaRFC2544TestResultDelayMinimum 1.3.6.1.4.1.738.1.5.130.1.2.2.1.7 unsigned32 read-only
Minimum delay for SAA RFC2544 test measured in 1/100th of a microsecond.
                         prvtSaaRFC2544TestResultDelayAverage 1.3.6.1.4.1.738.1.5.130.1.2.2.1.8 unsigned32 read-only
Average delay for SAA RFC2544 test measured in 1/100th of a microsecond.
                         prvtSaaRFC2544TestResultDelayMaximum 1.3.6.1.4.1.738.1.5.130.1.2.2.1.9 unsigned32 read-only
Maximum delay for SAA RFC2544 test measured in 1/100th of a microsecond.
             prvtSaaProfiles 1.3.6.1.4.1.738.1.5.130.1.3
                 prvtSaaProfileTable 1.3.6.1.4.1.738.1.5.130.1.3.1 no-access
Table contains SAA thresholds.
                     prvtSaaProfileEntry 1.3.6.1.4.1.738.1.5.130.1.3.1.1 no-access
NONE
                         prvtSaaProfileIndex 1.3.6.1.4.1.738.1.5.130.1.3.1.1.1 unsigned32 no-access
SAA profile table index.
                         prvtSaaProfileDelayNE 1.3.6.1.4.1.738.1.5.130.1.3.1.1.2 unsigned32 read-write
Near end delay in microseconds
                         prvtSaaProfileDelayFE 1.3.6.1.4.1.738.1.5.130.1.3.1.1.3 unsigned32 read-write
Far end delay in microseconds
                         prvtSaaProfileJitterNE 1.3.6.1.4.1.738.1.5.130.1.3.1.1.4 unsigned32 read-write
Near end jitter in microseconds
                         prvtSaaProfileJitterFE 1.3.6.1.4.1.738.1.5.130.1.3.1.1.5 unsigned32 read-write
Far end jitter in microseconds
                         prvtSaaProfileFrameLossNE 1.3.6.1.4.1.738.1.5.130.1.3.1.1.6 unsigned32 read-write
Near end frame-loss measured in 0.001 of percent
                         prvtSaaProfileFrameLossFE 1.3.6.1.4.1.738.1.5.130.1.3.1.1.7 unsigned32 read-write
Far end frame-loss measured in 0.001 of percent
                         prvtSaaProfileRowStatus 1.3.6.1.4.1.738.1.5.130.1.3.1.1.8 rowstatus read-only
Creation/delete/edit of the SAA profile.
                         prvtSaaProfileName 1.3.6.1.4.1.738.1.5.130.1.3.1.1.9 octet string read-only
Name assigned to the SAA profile.
             prvtTwampObjects 1.3.6.1.4.1.738.1.5.130.1.4
                 prvtTwampTest 1.3.6.1.4.1.738.1.5.130.1.4.1
                     prvtTwampTestTable 1.3.6.1.4.1.738.1.5.130.1.4.1.1 no-access
Table contains TWAMP tests.
                         prvtTwampTestEntry 1.3.6.1.4.1.738.1.5.130.1.4.1.1.1 no-access
Entry in prvtTwampTestTable
                             prvtTwampTestName 1.3.6.1.4.1.738.1.5.130.1.4.1.1.1.1 prvttwamptestnametype no-access
TWAMP test name.
                             prvtTwampTestRowStatus 1.3.6.1.4.1.738.1.5.130.1.4.1.1.1.2 rowstatus read-only
Create/delete entry in prvtTwampTestTable.
                             prvtTwampTestServer 1.3.6.1.4.1.738.1.5.130.1.4.1.1.1.3 ipaddress read-only
TWAMP test server ip-address.
                             prvtTwampTestSessionsCount 1.3.6.1.4.1.738.1.5.130.1.4.1.1.1.4 integer32 read-only
The number of parallel test sessions.
                             prvtTwampTestPackets 1.3.6.1.4.1.738.1.5.130.1.4.1.1.1.5 integer32 read-only
The number of packets in parallel sessions.
                             prvtTwampTestTimeout 1.3.6.1.4.1.738.1.5.130.1.4.1.1.1.6 integer32 read-only
The timout interval of test packets (in milliseconds).
                             prvtTwampTestDelay 1.3.6.1.4.1.738.1.5.130.1.4.1.1.1.7 integer32 read-only
The delay interval between test packets (in milliseconds)
                             prvtTwampTestExecuteNow 1.3.6.1.4.1.738.1.5.130.1.4.1.1.1.8 integer32 read-only
When this object is set to '1', command self-test execute-now. When this object is set to '2' the self-test is stopped. Setting the variable to '0' results in an 'inconsistentValue' error. Setting it to any other value has no effect. When this object is read, the value '0' is returned.
                 prvtTwampServer 1.3.6.1.4.1.738.1.5.130.1.4.2
                     prvtTwampServerInnactivity 1.3.6.1.4.1.738.1.5.130.1.4.2.1 integer32 read-write
The server innactivity timeout interval of the TWAMP server (in seconds).
                     prvtTwampServerSessionInnactivity 1.3.6.1.4.1.738.1.5.130.1.4.2.2 integer32 read-write
The session innactivity timeout interval of the TWAMP server (in seconds).
                     prvtTwampServerMaxSessions 1.3.6.1.4.1.738.1.5.130.1.4.2.3 integer32 read-write
The maximum number of controll sessions supported by the TWAMP server.
                     prvtTwampServerMaxParallelSessions 1.3.6.1.4.1.738.1.5.130.1.4.2.4 integer32 read-write
The maximum number of parallel test sessions for each client supperted by the TWAMP server.
                     prvtTwampServerShutdown 1.3.6.1.4.1.738.1.5.130.1.4.2.5 truthvalue read-write
The administrative state of the TWAMP server.
                     prvtTwampClientTable 1.3.6.1.4.1.738.1.5.130.1.4.2.6 no-access
Table contains the allowed clients for the TWAMP server.
                         prvtTwampClientEntry 1.3.6.1.4.1.738.1.5.130.1.4.2.6.1 no-access
Entry in twampClientTable.
                             prvtTwampClientIp 1.3.6.1.4.1.738.1.5.130.1.4.2.6.1.1 ipaddress no-access
The ip-address of the client.
                             prvtTwampClientRowStatus 1.3.6.1.4.1.738.1.5.130.1.4.2.6.1.2 rowstatus read-only
create/delete entry in prvtTwampClientTable
                     prvtTwampServerControlSessions 1.3.6.1.4.1.738.1.5.130.1.4.2.7 integer32 read-only
The number of current control sessions established on the TWAMP server.
                     prvtTwampServerTestSessions 1.3.6.1.4.1.738.1.5.130.1.4.2.8 integer32 read-only
The number of current test sessions established on the TWAMP server.
                 prvtTwampTestResult 1.3.6.1.4.1.738.1.5.130.1.4.3
                     prvtTwampTestResultTable 1.3.6.1.4.1.738.1.5.130.1.4.3.1 no-access
Table contains statistics of the executed TWAMP tests.
                         prvtTwampTestResultEntry 1.3.6.1.4.1.738.1.5.130.1.4.3.1.1 no-access
Entry in twampTestResultTable
                             prvtTwampTestId 1.3.6.1.4.1.738.1.5.130.1.4.3.1.1.1 unsigned32 read-only
The internal ID of the TWAMP test instance.
                             prvtTwampTestResultName 1.3.6.1.4.1.738.1.5.130.1.4.3.1.1.2 prvttwamptestnametype read-only
TWAMP test name.
                             prvtTwampTestStartTime 1.3.6.1.4.1.738.1.5.130.1.4.3.1.1.3 unsigned32 read-only
The start time of the TWAMP test instance.
                             prvtTwampTestServerAddress 1.3.6.1.4.1.738.1.5.130.1.4.3.1.1.4 ipaddress read-only
The server ip-address of the TWAMP test instance.
                             prvtTwampTestSessions 1.3.6.1.4.1.738.1.5.130.1.4.3.1.1.5 unsigned32 read-only
The number of parallel test sessions of the TWAMP test instance.
                             prvtTwampTestState 1.3.6.1.4.1.738.1.5.130.1.4.3.1.1.6 integer read-only
The status of the executed TWAMP test instance. Enumeration: 'failed': 1, 'running': 2, 'stopped': 3, 'finished': 4.
                             prvtTwampTestRtt 1.3.6.1.4.1.738.1.5.130.1.4.3.1.1.7 counter64 read-only
The average round-trip time of the TWAMP test sample.
                             prvtTwampTestMinRtt 1.3.6.1.4.1.738.1.5.130.1.4.3.1.1.8 counter64 read-only
The minimum round-trip time of the TWAMP test sample.
                             prvtTwampTestMaxRtt 1.3.6.1.4.1.738.1.5.130.1.4.3.1.1.9 counter64 read-only
The maximum round-trip time of the TWAMP test sample.
                             prvtTwampTestPcktSent 1.3.6.1.4.1.738.1.5.130.1.4.3.1.1.10 unsigned32 read-only
The number of test packets sent for the TWAMP test instance.
                             prvtTwampTestPcktLost 1.3.6.1.4.1.738.1.5.130.1.4.3.1.1.11 unsigned32 read-only
The number of lost test packets.
                             prvtTwampTestPcktDrop 1.3.6.1.4.1.738.1.5.130.1.4.3.1.1.12 unsigned32 read-only
The number of dropped test packets.
                             prvtTwampTestVariation 1.3.6.1.4.1.738.1.5.130.1.4.3.1.1.13 counter64 read-only
The maximum module variation of the TWAMP test sample
                             prvtTwampTestVariationLow 1.3.6.1.4.1.738.1.5.130.1.4.3.1.1.14 prvttwampdecimalpercent read-only
The percent of singletons whose variation is less than 10% of the negated maximum module variation of the sample.
                             prvtTwampTestVariationMiddle 1.3.6.1.4.1.738.1.5.130.1.4.3.1.1.15 prvttwampdecimalpercent read-only
The percent of singletons whose variation by module is less than 10% of the maximum module variation of the sample.
                             prvtTwampTestVariationHigh 1.3.6.1.4.1.738.1.5.130.1.4.3.1.1.16 prvttwampdecimalpercent read-only
The percent of singletons whose variation is greater than 10% of the maximum module variation of the sample.
         prvtSaaConformance 1.3.6.1.4.1.738.1.5.130.2
             prvtSaaCompliances 1.3.6.1.4.1.738.1.5.130.2.1
                 prvtSaaCompliance 1.3.6.1.4.1.738.1.5.130.2.1.1
The compliance statement for support of the SAA MIB module.
             prvtSaaGroups 1.3.6.1.4.1.738.1.5.130.2.2
                 prvtSaaY1731TestGroup 1.3.6.1.4.1.738.1.5.130.2.2.1
Objects for the SAA Y1731 test group.
                 prvtSaaRFC2544TestGroup 1.3.6.1.4.1.738.1.5.130.2.2.2
Objects for the SAA RFC2544 test group.
                 prvtSaaY1731TestResultsGroup 1.3.6.1.4.1.738.1.5.130.2.2.3
Objects for the SAA Y1731 test results group.
                 prvtSaaRFC2544TestResultsGroup 1.3.6.1.4.1.738.1.5.130.2.2.4
Objects for the SAA RFC2544 test results group.
                 prvtSaaProfilesGroup 1.3.6.1.4.1.738.1.5.130.2.2.5
Objects for the SAA profiles group.
                 prvtSaaNotificationsGroup 1.3.6.1.4.1.738.1.5.130.2.2.6
Objects for the Notifications group.
                 prvtSaaY1731LoopbackTestGroup 1.3.6.1.4.1.738.1.5.130.2.2.7
Objects for the SAA Y1731 Loopback test group.