PRVT-RAPS-SVC-MIB: View SNMP OID List / Download MIB

VENDOR: B.A.T.M. ADVANCE TECHNOLOGIES


 Home MIB: PRVT-RAPS-SVC-MIB
Download as:   
SNMPv2-CONF, PRVT-QOS-MIB, IF-MIB, SNMPv2-SMI, SNMPv2-TC, PRVT-RAPS-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 prvtRapsSvcMIB 1.3.6.1.4.1.738.1.7.6
The SNMP MIB module for Ring Automatic Protection Switching with Service Support (G.8032).
     prvtRapsSvcMIBNotifications 1.3.6.1.4.1.738.1.7.6.0
         prvtRapsSvcInstSubRingDefectAlarm 1.3.6.1.4.1.738.1.7.6.0.1
This trap will be sent by any subring instance when it notices a defect. So far only the situation when two or more RPL-owners are defined in the ring is identified as a defect. This scenario is noticed when the instance with the RPL-Owner role receives a RAPS packet with the RB bit set in its status field from a different NodeID than its own. The management entity receiving the notification can identify the system from the network source address of the notification, and can identify the instance reporting the change by the indices in the OID of the prvtRapsInstSubRingOperStatus variable in the notification.
         prvtRapsSvcInstSubRingSwitchoverAlarm 1.3.6.1.4.1.738.1.7.6.0.2
This trap will be sent by any subring instance when it changes state. The management entity receiving the notification can identify the system from the network source address of the notification, and can identify the instance reporting the change by the indices in the OID of the prvtRapsInstSubRingRapsState variable in the notification.
     prvtRapsSvcMIBObjects 1.3.6.1.4.1.738.1.7.6.1
         prvtRapsSvcInstTable 1.3.6.1.4.1.738.1.7.6.1.1 no-access
R-APS Instance table. Each entry in this table defines an instance of a Ring APS.
             prvtRapsSvcInstEntry 1.3.6.1.4.1.738.1.7.6.1.1.1 no-access
An entry in prvtRapsSvcInstTable.
                 prvtRapsSvcInstIndex 1.3.6.1.4.1.738.1.7.6.1.1.1.1 prvtrapsinstindextype no-access
An arbitrary index uniquely identifying a Ring APS instance.
                 prvtRapsSvcInstRowStatus 1.3.6.1.4.1.738.1.7.6.1.1.1.2 rowstatus read-only
The RowStatus for this R-APS instance.
                 prvtRapsSvcInstCfmDomainLevel 1.3.6.1.4.1.738.1.7.6.1.1.1.3 prvtrapscfmleveltype read-only
The CFM domain level for this R-APS instance. Must perform shutdown to change this object.
                 prvtRapsSvcInstDescription 1.3.6.1.4.1.738.1.7.6.1.1.1.4 displaystring read-only
RAPS instance description.
         prvtRapsSvcInstSubRingTable 1.3.6.1.4.1.738.1.7.6.1.2 no-access
R-APS Instance Sub-ring Table Each entry in this table defines a sub-ring belonging to a R-APS instance. Sub-rings are not available in version 1 mode.
             prvtRapsSvcInstSubRingEntry 1.3.6.1.4.1.738.1.7.6.1.2.1 no-access
An entry in prvtRapsSvcInstSubRingTable.
                 prvtRapsSvcInstSubRingIndex 1.3.6.1.4.1.738.1.7.6.1.2.1.1 prvtrapsinstindextype no-access
An arbitrary index uniquely identifying a sub-ring for this R-APS instance.
                 prvtRapsSvcInstSubRingRowStatus 1.3.6.1.4.1.738.1.7.6.1.2.1.2 rowstatus read-only
The RowStatus for this sub-ring.
                 prvtRapsSvcInstSubRingId 1.3.6.1.4.1.738.1.7.6.1.2.1.3 prvtrapsringidtype read-only
The ring ID for this sub-ring.
                 prvtRapsSvcInstSubRingRole 1.3.6.1.4.1.738.1.7.6.1.2.1.4 prvtrapsroletype read-only
The role of the node inside this sub-ring. Must perform shutdown to change this object.
                 prvtRapsSvcInstSubRingVirtChanService 1.3.6.1.4.1.738.1.7.6.1.2.1.5 unsigned32 read-only
Configures the virtual channel VLAN for this sub-ring. Must be a VLAN from the prvtRapsInstMonVlanTable. No two sub-rings can use the same VLAN for the virtual channel VLAN.
                 prvtRapsSvcInstSubRingRevertiveMode 1.3.6.1.4.1.738.1.7.6.1.2.1.6 truthvalue read-only
Set to 'true' to select revertive behavior for this sub-ring.
                 prvtRapsSvcInstSubRingHoldOffTimer 1.3.6.1.4.1.738.1.7.6.1.2.1.7 prvtrapsholdofftype read-only
The hold-off timer time-out value for this sub-ring.
                 prvtRapsSvcInstSubRingWaitTimer 1.3.6.1.4.1.738.1.7.6.1.2.1.8 prvtrapswaittimertype read-only
The wait-to-restore timer time-out value for this sub-ring.
                 prvtRapsSvcInstSubRingGuardTimer 1.3.6.1.4.1.738.1.7.6.1.2.1.9 prvtrapsguardtimertype read-only
The guard timer time-out value for this sub-ring.
                 prvtRapsSvcInstSubRingBlockTimer 1.3.6.1.4.1.738.1.7.6.1.2.1.10 prvtrapsblocktimertype read-only
The wait to block timer time-out value for this sub-ring.
                 prvtRapsSvcInstSubRingPropTopChng 1.3.6.1.4.1.738.1.7.6.1.2.1.11 truthvalue read-only
Set to 'true' to enable topology change propagation for this sub-ring.
                 prvtRapsSvcInstSubRingShutdown 1.3.6.1.4.1.738.1.7.6.1.2.1.12 truthvalue read-only
Set to 'true' to de-activate this sub-ring.
                 prvtRapsSvcInstSubRingClear 1.3.6.1.4.1.738.1.7.6.1.2.1.13 prvtrapsactiontype read-only
Send the Clear command to this sub-ring.
                 prvtRapsSvcInstSubRingManualSwitch 1.3.6.1.4.1.738.1.7.6.1.2.1.14 prvtrapsactiontype read-only
Send the Manual Switch command to this sub-ring.
                 prvtRapsSvcInstSubRingForcedSwitch 1.3.6.1.4.1.738.1.7.6.1.2.1.15 prvtrapsactiontype read-only
Send the Forced Switch command to this sub-ring.
                 prvtRapsSvcInstSubRingOperStatus 1.3.6.1.4.1.738.1.7.6.1.2.1.16 prvtrapsinststatustype read-only
The operational status of this sub-ring.
                 prvtRapsSvcInstSubRingRapsState 1.3.6.1.4.1.738.1.7.6.1.2.1.17 prvtrapsstatestype read-only
The current state of this sub-ring.
                 prvtRapsSvcInstSubRingTopPriCmd 1.3.6.1.4.1.738.1.7.6.1.2.1.18 prvtrapstoppricmdtype read-only
The received Top Priority Request and Status value for this sub-ring.
                 prvtRapsSvcInstSubRingPortName 1.3.6.1.4.1.738.1.7.6.1.2.1.19 octet string read-only
The textual name of the port belonging to this sub-ring. For a physical port, the format is U/S/P. For a LAG interface, the format is agX.
                 prvtRapsSvcInstSubRingLinkStatus 1.3.6.1.4.1.738.1.7.6.1.2.1.20 prvtrapslinkoperstatustype read-only
The operational status of the port belonging to this sub-ring.
                 prvtRapsSvcInstSubRingRcvdNodeId 1.3.6.1.4.1.738.1.7.6.1.2.1.21 macaddress read-only
The MAC address of the remote R-APS device connected to the port belonging to this sub-ring.
                 prvtRapsSvcInstSubRingRcvdCmd 1.3.6.1.4.1.738.1.7.6.1.2.1.22 prvtrapsreceivedcommandtype read-only
The command received on the port belonging to this sub-ring.
                 prvtRapsSvcInstSubRingRcvdInfo 1.3.6.1.4.1.738.1.7.6.1.2.1.23 prvtrapsreceivedinfotype read-only
The info received on the port belonging to this sub-ring.
                 prvtRapsSvcInstSubRingDescription 1.3.6.1.4.1.738.1.7.6.1.2.1.24 displaystring read-only
RAPS instance sub-ring description.
                 prvtRapsSvcInstSubRingVcRcvdNodeId 1.3.6.1.4.1.738.1.7.6.1.2.1.25 macaddress read-only
The MAC address of the remote R-APS device connected through the virtual channel.
                 prvtRapsSvcInstSubRingVcRcvdCmd 1.3.6.1.4.1.738.1.7.6.1.2.1.26 prvtrapsreceivedcommandtype read-only
The command received through the virtual channel belonging to this sub-ring.
                 prvtRapsSvcInstSubRingVcRcvdInfo 1.3.6.1.4.1.738.1.7.6.1.2.1.27 prvtrapsreceivedinfotype read-only
The info received through the virtual channel belonging to this sub-ring.
                 prvtRapsSvcInstSubRingControlVlan 1.3.6.1.4.1.738.1.7.6.1.2.1.28 prvtrapsvlanidtype read-only
The control VLAN for this R-APS sub-ring instance. This object must be set to the ID of an existing VLAN. Each R-APS sub-ring instance must use a unique VLAN for the control VLAN. Must perform shutdown to change this object.
         prvtRapsSvcInstSubRingPortTable 1.3.6.1.4.1.738.1.7.6.1.3 no-access
R-APS Instance Sub-ring port Table An entry in this table defines a physical port belonging to a sub-ring. Exactly one interface must be defined per sub-ring. This includes physical ports (defined in prvtRapsInstSubRingPortTable) and LAG interfaces (defined in prvtRapsInstSubRingLagTable). A sub-ring port can not be part of the main ring.
             prvtRapsSvcInstSubRingPortEntry 1.3.6.1.4.1.738.1.7.6.1.3.1 no-access
An entry in prvtRapsInstSubRingPortTable.
                 prvtRapsSvcInstSubRingPortRowStatus 1.3.6.1.4.1.738.1.7.6.1.3.1.1 rowstatus read-only
The RowStatus for this sub-ring port.
                 prvtRapsSvcInstSubRingPortMep 1.3.6.1.4.1.738.1.7.6.1.3.1.2 prvtrapsmepidtype read-only
The peer maintenance entity group end point ID that should monitor this sub-ring port. A sub-ring MEP can not be used in another ring.
                 prvtRapsSvcInstSubRingPortRpl 1.3.6.1.4.1.738.1.7.6.1.3.1.3 truthvalue read-only
Set to 'true' to define this sub-ring port as a Ring Protection Link port. Exactly one RPL port must be defined when sub-ring role (prvtRapsInstSubRingRole) is not 'simpleNode'. In 'simpleNode' role, no RPL ports must be defined.
                 prvtRapsSvcInstSubRingPortMonitoringMethod 1.3.6.1.4.1.738.1.7.6.1.3.1.4 prvtrapsmonitoringmethodtype read-only
Ethernet ring protection monitoring methods
         prvtRapsSvcInstSubRingLagTable 1.3.6.1.4.1.738.1.7.6.1.4 no-access
R-APS Instance Sub-ring LAG interface Table An entry in this table defines a LAG interface belonging to a sub-ring. Exactly one interface must be defined per sub-ring. This includes physical ports (defined in prvtRapsInstSubRingPortTable) and LAG interfaces (defined in prvtRapsInstSubRingLagTable).
             prvtRapsSvcInstSubRingLagEntry 1.3.6.1.4.1.738.1.7.6.1.4.1 no-access
An entry in prvtRapsInstSubRingLagTable.
                 prvtRapsSvcInstSubRingLagId 1.3.6.1.4.1.738.1.7.6.1.4.1.1 prvtrapslinkaggidtype no-access
Uniquely identifies a LAG interface belonging to a sub-ring. Must be set to the LAG ID of an existing LAG interface. A sub-ring LAG port can not be part of the main ring.
                 prvtRapsSvcInstSubRingLagRowStatus 1.3.6.1.4.1.738.1.7.6.1.4.1.2 rowstatus read-only
The RowStatus for this sub-ring LAG interface.
                 prvtRapsSvcInstSubRingLagMep 1.3.6.1.4.1.738.1.7.6.1.4.1.3 prvtrapsmepidtype read-only
The peer maintenance entity group end point ID that should monitor this sub-ring LAG interface. A sub-ring MEP can not be used in another ring.
                 prvtRapsSvcInstSubRingLagRpl 1.3.6.1.4.1.738.1.7.6.1.4.1.4 truthvalue read-only
Set to 'true' to define this sub-ring LAG port as a Ring Protection Link port. Exactly one RPL port must be defined when sub-ring role (prvtRapsInstSubRingRole) is not 'simpleNode'. In 'simpleNode' role, no RPL ports must be defined.
                 prvtRapsSvcInstSubRingLagMonitoringMethod 1.3.6.1.4.1.738.1.7.6.1.4.1.5 prvtrapsmonitoringmethodtype read-only
Ethernet ring protection monitoring methods