PRVT-JDSU-MIB: View SNMP OID List / Download MIB

VENDOR: B.A.T.M. ADVANCE TECHNOLOGIES


 Home MIB: PRVT-JDSU-MIB
Download as:   

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 prvtJdsuMib 1.3.6.1.4.1.738.1.5.137
This MIB provide control and analisys for JDSU functionality.
         prvtJdsuNotifications 1.3.6.1.4.1.738.1.5.137.0
             prvtJdsuAdminStateChange 1.3.6.1.4.1.738.1.5.137.0.1
This trap should be sent whenever a JDSU admins state is changed for a specific interface.
             prvtJdsuOperStateChange 1.3.6.1.4.1.738.1.5.137.0.2
This trap should be sent whenever a JDSU state is changed on a specific interface.
         prvtJdsuObjects 1.3.6.1.4.1.738.1.5.137.1
             prvtJdsuLoopback 1.3.6.1.4.1.738.1.5.137.1.1
                 prvtJdsuLoopbackTable 1.3.6.1.4.1.738.1.5.137.1.1.1 no-access
This table holds the configuration for JDSU loopback
                     prvtJdsuLoopbackEntry 1.3.6.1.4.1.738.1.5.137.1.1.1.1 no-access
NONE
                         prvtJdsuLoopbackAdminStatus 1.3.6.1.4.1.738.1.5.137.1.1.1.1.1 integer read-only
JDSU remote loopback admin status. This can be used to either enable or disable JDSU loopback on a certain interface. Forced parameter is used for manually set loopback. Remote parameter is used for JDSU remote operation. Enumeration: 'forced': 2, 'disable': 1, 'remote': 3.
                         prvtJdsuLoopbackRemoteMac 1.3.6.1.4.1.738.1.5.137.1.1.1.1.2 macaddress read-write
Remote MAC address of the device for JDSU loopback testing.
                         prvtJdsuLoopbackRemoteInnerVlan 1.3.6.1.4.1.738.1.5.137.1.1.1.1.3 vlanid read-write
This is used as the VLAN tag in case of single encapsulated packets or as the inner VLAN tag in case of dual encapsulated packets.
                         prvtJdsuLoopbackRemoteOuterVlan 1.3.6.1.4.1.738.1.5.137.1.1.1.1.4 vlanid read-write
The outer VLAN tag in case of dual encapsulated packets.
                         prvtJdsuLoopbackOperationalStatus 1.3.6.1.4.1.738.1.5.137.1.1.1.1.5 integer read-only
JDSU remote loopback current operational status. Enumeration: 'down': 1, 'up': 2.
                         prvtJdsuLoopbackRowStatus 1.3.6.1.4.1.738.1.5.137.1.1.1.1.6 rowstatus read-only
The status of the row entry. The writable columns in a row can not be changed if the row is active. Certain columns must have a valid value before a row can be activated.
         prvtJdsuConformance 1.3.6.1.4.1.738.1.5.137.2
             prvtJdsuCompliances 1.3.6.1.4.1.738.1.5.137.2.1
                 prvtJdsuCompliance 1.3.6.1.4.1.738.1.5.137.2.1.1
The compliance statement for support of the private JDSU MIB module.
             prvtJdsuGroups 1.3.6.1.4.1.738.1.5.137.2.2
                 prvtJdsuLoopbackGroup 1.3.6.1.4.1.738.1.5.137.2.2.1
Objects for the JDSU loopback group.
                 prvtJdsuLoopbackNotificationsGroup 1.3.6.1.4.1.738.1.5.137.2.2.2
Objects for the Event Propagation notifications group.