PRVT-CFM-MIB: View SNMP OID List / Download MIB

VENDOR: B.A.T.M. ADVANCE TECHNOLOGIES


 Home MIB: PRVT-CFM-MIB
Download as:   

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 prvtCfmMib 1.3.6.1.4.1.738.1.5.131
Prvt extension of Connectivity Fault Management module for managing IEEE 802.1ag
         prvtCfmMibNotifications 1.3.6.1.4.1.738.1.5.131.0
             prvtCfm1wJitterThreshold 1.3.6.1.4.1.738.1.5.131.0.1
This trap should be sent whenever the one way jitter on a CFM test will surpass one of the 2 defined thresholds.
             prvtCfmJitterThreshold 1.3.6.1.4.1.738.1.5.131.0.2
This trap should be sent whenever the two way jitter on a CFM test will surpass one of the 2 defined thresholds.
             prvtCfmFrameLossThreshold 1.3.6.1.4.1.738.1.5.131.0.3
This trap should be sent whenever the frame loss on a CFM test will surpass one of the 2 defined thresholds.
             prvtCfmLatencyThreshold 1.3.6.1.4.1.738.1.5.131.0.4
This trap should be sent whenever the latency on a CFM test will surpass one of the 2 defined thresholds.
             prvtCfmAisReceived 1.3.6.1.4.1.738.1.5.131.0.5
This trap is issued whenever an AIS condition with specified lifetime on a MEP is met.
             prvtCfmLckReceived 1.3.6.1.4.1.738.1.5.131.0.6
This trap is issued whenever an LCK condition with specified lifetime on a MEP is met.
         prvtCfmMibObjects 1.3.6.1.4.1.738.1.5.131.1
             prvtCfmUpdateInterval 1.3.6.1.4.1.738.1.5.131.1.1 unsigned32 read-write
Time between monitoring parameters update (in seconds). A value of 0 suspends the monitoring task and a value different from 0 resumes it. Default is 20 seconds.
             prvtCfmStatus 1.3.6.1.4.1.738.1.5.131.1.2 integer read-write
Enable/disable cfm. Enumeration: 'enable': 1, 'disable': 2.
             prvtCfmProfile 1.3.6.1.4.1.738.1.5.131.1.3
                 prvtCfmProfileTableNextIndex 1.3.6.1.4.1.738.1.5.131.1.3.1 dot1afcfmindexintegernextfree read-only
This object contains an unused value for prvtCfmProfileIndex in the prvtCfmProfileTable, or a zero to indicate that none exist.
                 prvtCfmProfileTable 1.3.6.1.4.1.738.1.5.131.1.3.2 no-access
Table contains loopback results from all remote MEPs in the MA.
                     prvtCfmProfileEntry 1.3.6.1.4.1.738.1.5.131.1.3.2.1 no-access
a
                         prvtCfmProfileIndex 1.3.6.1.4.1.738.1.5.131.1.3.2.1.1 unsigned32 no-access
Table index.
                         prvtCfmProfileName 1.3.6.1.4.1.738.1.5.131.1.3.2.1.2 displaystring read-write
Profile name.
                         prvtCfmProfilePriority 1.3.6.1.4.1.738.1.5.131.1.3.2.1.3 unsigned32 read-write
802.1p class-of-service setting.
                         prvtCfmProfileRate 1.3.6.1.4.1.738.1.5.131.1.3.2.1.4 unsigned32 read-write
Number of Request packets to send each time.
                         prvtCfmProfileSize 1.3.6.1.4.1.738.1.5.131.1.3.2.1.5 unsigned32 read-write
Size of data TLV included in probe packets (in octets).
                         prvtCfmProfileBucketSize 1.3.6.1.4.1.738.1.5.131.1.3.2.1.6 unsigned32 read-write
Number of the results to save for results calculation.
                         prvtCfmProfile1wJitterError 1.3.6.1.4.1.738.1.5.131.1.3.2.1.7 unsigned32 read-write
Specifies one-way jitter error values to monitor in milliseconds.
                         prvtCfmProfile1wJitterWarning 1.3.6.1.4.1.738.1.5.131.1.3.2.1.8 unsigned32 read-write
Specifies one-way jitter warning values to monitor in milliseconds.
                         prvtCfmProfileJitterError 1.3.6.1.4.1.738.1.5.131.1.3.2.1.9 unsigned32 read-write
Specifies round-trip jitter error values to monitor in milliseconds.
                         prvtCfmProfileJitterErrorPeriod 1.3.6.1.4.1.738.1.5.131.1.3.2.1.10 unsigned32 read-write
Specifies the duration jitter occurs in seconds.
                         prvtCfmProfileJitterWarning 1.3.6.1.4.1.738.1.5.131.1.3.2.1.11 unsigned32 read-write
Specifies round-trip jitter warning values to monitor in milliseconds. If set value is greater than the jitter-error it means that the warning is disabled.
                         prvtCfmProfileJitterWarningPeriod 1.3.6.1.4.1.738.1.5.131.1.3.2.1.12 unsigned32 read-write
Specifies the duration jitter occurs in seconds.
                         prvtCfmProfileFrameLossError 1.3.6.1.4.1.738.1.5.131.1.3.2.1.13 unsigned32 read-write
Specifies round-trip frame-loss error values to monitor. The default is frame-loss of 10% is reported.
                         prvtCfmProfileFrameLossWarning 1.3.6.1.4.1.738.1.5.131.1.3.2.1.14 unsigned32 read-write
Specifies round-trip frame-loss warning values to monitor. The default is frame-loss of 8% is reported. If set value is greater than the frame-loss-error it means that the warning is disable.
                         prvtCfmProfileLatencyError 1.3.6.1.4.1.738.1.5.131.1.3.2.1.15 unsigned32 read-write
Specifies round-trip latency error values to monitor in milliseconds.
                         prvtCfmProfileLatencyErrorPeriod 1.3.6.1.4.1.738.1.5.131.1.3.2.1.16 unsigned32 read-write
Specifies the duration latency increase occurs in seconds.
                         prvtCfmProfileLatencyWarning 1.3.6.1.4.1.738.1.5.131.1.3.2.1.17 unsigned32 read-write
Specifies round-trip latency error values to monitor in milliseconds. If set value is greater than the latency-error it means that the warning is disabled.
                         prvtCfmProfileLatencyWarningPeriod 1.3.6.1.4.1.738.1.5.131.1.3.2.1.18 unsigned32 read-write
Specifies the duration latency increase occurs in seconds.
                         prvtCfmProfileRowStatus 1.3.6.1.4.1.738.1.5.131.1.3.2.1.19 rowstatus read-only
The status of the row. The writable columns in a row can not be changed if the row is active. All columns must have a valid value before a row can be activated.
                         prvtCfmProfile1wJitterEnable 1.3.6.1.4.1.738.1.5.131.1.3.2.1.20 truthvalue read-write
A boolean showing if one way jitter calculation is enabled.
                         prvtCfmProfileJitterEnable 1.3.6.1.4.1.738.1.5.131.1.3.2.1.21 truthvalue read-write
A boolean showing if two way jitter calculation is enabled.
                         prvtCfmProfileFrameLossEnable 1.3.6.1.4.1.738.1.5.131.1.3.2.1.22 truthvalue read-write
A boolean showing if frame loss calculation is enabled.
                         prvtCfmProfileLatencyEnable 1.3.6.1.4.1.738.1.5.131.1.3.2.1.23 truthvalue read-write
A boolean showing if latency calculation is enabled.
             prvtCfmProcess 1.3.6.1.4.1.738.1.5.131.1.4
                 prvtCfmProcessTableNextIndex 1.3.6.1.4.1.738.1.5.131.1.4.1 dot1afcfmindexintegernextfree read-only
This object contains an unused value for prvtCfmProcessIndex in the prvtCfmProcessTable, or a zero to indicate that none exists.
                 prvtCfmProcessTable 1.3.6.1.4.1.738.1.5.131.1.4.2 no-access
Private extension of dot1agCfmMaNetTable. Controls the two-way monitoring process for MEP's in the MA.
                     prvtCfmProcessEntry 1.3.6.1.4.1.738.1.5.131.1.4.2.1 no-access
a
                         prvtCfmProcessIndex 1.3.6.1.4.1.738.1.5.131.1.4.2.1.1 unsigned32 no-access
Table index.
                         prvtCfmProcessProfileIndex 1.3.6.1.4.1.738.1.5.131.1.4.2.1.2 unsigned32 read-write
Index of the monitoring profile to be used.
                         prvtCfmProcessName 1.3.6.1.4.1.738.1.5.131.1.4.2.1.3 octet string read-only
The name of the process. Should be unique per domain/MA
                         prvtCfmProcessStatus 1.3.6.1.4.1.738.1.5.131.1.4.2.1.4 truthvalue read-write
Enable/disable two-way monitoring process for MEP's in the MA.
                         prvtCfmProcessRepeatInterval 1.3.6.1.4.1.738.1.5.131.1.4.2.1.5 unsigned32 read-write
Repeating frequency of the monitoring process.
                         prvtCfmProcessPacketType 1.3.6.1.4.1.738.1.5.131.1.4.2.1.6 integer read-write
Use CFM Loopback or Y.1731 LMMs and DMMs packets. Enumeration: 'cfm': 1, 'y1731': 2.
                         prvtCfmProcessUnreturnedPkts 1.3.6.1.4.1.738.1.5.131.1.4.2.1.7 unsigned32 read-only
Number of requests for which a reply hasn't been received. These packets will be counted as lost when they enter timeout.
                         prvtCfmProcessRowStatus 1.3.6.1.4.1.738.1.5.131.1.4.2.1.8 rowstatus read-only
The status of the row. The writable columns in a row can not be changed if the row is active. All columns must have a valid value before a row can be activated.
             prvtCfmProcessResult 1.3.6.1.4.1.738.1.5.131.1.5
                 prvtCfmProcessResultTable 1.3.6.1.4.1.738.1.5.131.1.5.1 no-access
Table contains process results.
                     prvtCfmProcessResultEntry 1.3.6.1.4.1.738.1.5.131.1.5.1.1 no-access
a
                         prvtCfmProcessResultOneWayJitter 1.3.6.1.4.1.738.1.5.131.1.5.1.1.1 unsigned32 read-only
One way jitter calculated for a specific remote MEP in milliseconds
                         prvtCfmProcessResultTwoWayJitter 1.3.6.1.4.1.738.1.5.131.1.5.1.1.2 unsigned32 read-only
Two way jitter calculated for a specific remote MEP in milliseconds
                         prvtCfmProcessResultLatency 1.3.6.1.4.1.738.1.5.131.1.5.1.1.3 unsigned32 read-only
Two way latency calculated for a specific remote MEP in milliseconds
                         prvtCfmProcessResultFrameloss 1.3.6.1.4.1.738.1.5.131.1.5.1.1.4 unsigned32 read-only
Two way frameloss calculated for a specific remote MEP in units of hundredths of percent. Note: When prvtCfmProcessResultFrameloss has value of 10000, all the values of prvtCfmProcessResultOneWayJitter, prvtCfmProcessResultTwoWayJitter and prvtCfmProcessResultLatency are irrelevant.
             prvtCfmMa 1.3.6.1.4.1.738.1.5.131.1.6
                 prvtCfmMaTable 1.3.6.1.4.1.738.1.5.131.1.6.1 no-access
Table includes extra variables needed for Y.1731 support and service awareness
                     prvtCfmMaEntry 1.3.6.1.4.1.738.1.5.131.1.6.1.1 no-access
a
                         prvtCfmMaCompAisLckEnabled 1.3.6.1.4.1.738.1.5.131.1.6.1.1.1 truthvalue read-write
Turn the AIS & LCK features on/off.
                         prvtCfmMaCompAisLckLevel 1.3.6.1.4.1.738.1.5.131.1.6.1.1.2 dot1agcfmmdlevelornone read-write
The MD level at which AIS & LCK frames will be sent. It should be greater then that of the current domain. The default value is '-1' representing 'not-configured'.
                         prvtCfmMaCompAisLckInterval 1.3.6.1.4.1.738.1.5.131.1.6.1.1.3 integer read-write
The time interval at which AIS and LCK frames will be sent Enumeration: 'interval1min': 2, 'interval1s': 1.
                         prvtCfmMaCompAisLckPriority 1.3.6.1.4.1.738.1.5.131.1.6.1.1.4 unsigned32 read-write
COS parameter for the outgoing AIS & LCK frames. The default value is '6'
                         prvtCfmMaCompServiceId 1.3.6.1.4.1.738.1.5.131.1.6.1.1.5 unsigned32 read-write
The primary service ID attached to this MA
                         prvtCfmMaCompNumberOfServices 1.3.6.1.4.1.738.1.5.131.1.6.1.1.6 unsigned32 read-only
The number of services attached to this MA
                         prvtCfmMaCompClearConnectivity 1.3.6.1.4.1.738.1.5.131.1.6.1.1.7 unsigned32 read-write
Number of MEP or 0 for all
             prvtCfmMep 1.3.6.1.4.1.738.1.5.131.1.7
                 prvtCfmMepTable 1.3.6.1.4.1.738.1.5.131.1.7.1 no-access
a
                     prvtCfmMepEntry 1.3.6.1.4.1.738.1.5.131.1.7.1.1 no-access
a
                         prvtCfmMepAlarmSupressed 1.3.6.1.4.1.738.1.5.131.1.7.1.1.1 truthvalue read-only
A boolean showing if an AIS or LCK packet was received from a lower level
                         prvtCfmMepAisCondition 1.3.6.1.4.1.738.1.5.131.1.7.1.1.2 truthvalue read-only
A boolean showing if there is AIS condition. The value of the object is true (an AIS condition), when there is a detection of signal-fail condition at a Server layer or reception of AIS at a server (sub-) layer MEP [AIS condition/Rec. ITU-T Y.1731]. The AIS condition will exit when following criteria is met: During an interval equal to 3.5 times the AIS transmission period indicated in the AIS frames received earlier, the MEP does not receive AIS frames or, when ETH-CC is used, upon clearing of LOC defect at MEP /Appendix I/Rec. ITU-T Y.1731. If prvtCfmMaCompAisLckLevel is configured the MEP should send AIS packets.
                         prvtCfmMepLckCondition 1.3.6.1.4.1.738.1.5.131.1.7.1.1.3 truthvalue read-only
A boolean showing if the MEP should lock the service towards the client and send LCK packets
                         prvtCfmMepAisLifetime 1.3.6.1.4.1.738.1.5.131.1.7.1.1.4 integer read-only
The lifetime of the last received AIS packet. During an interval equal to 3.5 times the AIS transmission period indicated in the AIS frames received earlier, the MEP does not receive AIS frames. The value is valid (non-zero) if AIS packets are being received. Enumeration: 'nolifetime': 0, 'lifetime35min': 2, 'lifetime35s': 1.
                         prvtCfmMepLckLifetime 1.3.6.1.4.1.738.1.5.131.1.7.1.1.5 integer read-only
The lifetime of the last received LCK packet. During an interval equal to 3.5 times the LCK transmission period indicated in the LCK frames received earlier, the MEP does not receive LCK frames. The value is valid (non-zero) if AIS packets are being received. Enumeration: 'nolifetime': 0, 'lifetime35min': 2, 'lifetime35s': 1.
                         prvtCfmMepTransmitMcastLbm 1.3.6.1.4.1.738.1.5.131.1.7.1.1.6 truthvalue read-write
A boolean to control sending Y.1731 multicast loopback.
                         prvtCfmMepTransmitLbmInfinite 1.3.6.1.4.1.738.1.5.131.1.7.1.1.7 truthvalue read-write
A boolean to control sending LBMs continuously until the operation is explicitly stopped by setting this back to false
                         prvtCfmMepTransmitLbmDelay 1.3.6.1.4.1.738.1.5.131.1.7.1.1.8 unsigned32 read-write
An amount of time to wait between sent LBMs (in seconds).
                         prvtCfmMepTransmitLbmTimeout 1.3.6.1.4.1.738.1.5.131.1.7.1.1.9 unsigned32 read-write
An amount of time to wait after the last sent LBM if no LBR is received (in seconds).
                         prvtCfmMepTransmitLtmTimeout 1.3.6.1.4.1.738.1.5.131.1.7.1.1.10 unsigned32 read-write
An amount of time to wait after the last sent LTM if no LTR is received (in seconds).
                         prvtCfmMepTransmitLbmSentPkts 1.3.6.1.4.1.738.1.5.131.1.7.1.1.11 unsigned32 read-only
Number of successfully sent packets in the current LBM session.
                         prvtCfmMepTransmitLbmSuccessRate 1.3.6.1.4.1.738.1.5.131.1.7.1.1.12 unsigned32 read-only
Success rate of the current LBM session (in percentage*100).
                         prvtCfmMepTransmitLbmMinTime 1.3.6.1.4.1.738.1.5.131.1.7.1.1.13 unsigned32 read-only
Minimum LBR response time (in msec).
                         prvtCfmMepTransmitLbmAvgTime 1.3.6.1.4.1.738.1.5.131.1.7.1.1.14 unsigned32 read-only
Average LBR response time (in msec).
                         prvtCfmMepTransmitLbmMaxTime 1.3.6.1.4.1.738.1.5.131.1.7.1.1.15 unsigned32 read-only
Maximum LBR response time (in msec).
                         prvtCfmMepSuportedRemoteMepsNo 1.3.6.1.4.1.738.1.5.131.1.7.1.1.16 integer read-write
The number of suported remote meps (for TMarc3x0 and TMarc280 devices) Enumeration: 'remoteMeps32': 32, 'remoteMeps8': 8, 'remoteMeps16': 16, 'remoteMeps24': 24.
                         prvtCfmMepExcludeCCMTLV 1.3.6.1.4.1.738.1.5.131.1.7.1.1.17 displaystring read-write
Bitmask that specifies what TLVs should be excluded(for TMarc3x0 and TMarc280 devices): On set opertaion: BIT4 = MSB Include/Exclude bit - if it is 1 the tlv is excluded from the specific CCM packet, if it is 0 the tlv will be included in the specific CCM packet BIT3 = If set 1 the OrgSpecific TLV will be excluded or included BIT2 = If set 1 the InterfaceStatus TLV will be excluded or included BIT1 = If set 1 the PortStatus TLV will be excluded or included BIT0 = LSB If set 1 the Sender ID TLV will be excluded or included Examples: If Interface Status and Port Status will be excluded the bitmask will look like this: 16 in hexadecimal BIT4 BIT3 BIT2 BIT1 BIT0 1 0 1 1 0 If Interface Status and Port Status will be included the bitmask will look like this: 06 in hexadecimal BIT4 BIT3 BIT2 BIT1 BIT0 0 0 1 1 0 On get operation it shows the bits corresponding to the excluded tlvs If Interface Status and Port Status are excluded: 06 in hexadecimal - 0 1 1 0
                 prvtCfmLbrTable 1.3.6.1.4.1.738.1.5.131.1.7.2 no-access
Table contains loopback results following the last loopback operation.
                     prvtCfmLbrEntry 1.3.6.1.4.1.738.1.5.131.1.7.2.1 no-access
a
                         prvtCfmLbrSeqNumber 1.3.6.1.4.1.738.1.5.131.1.7.2.1.1 unsigned32 no-access
Transaction identifier/Sequence number of the received LBR.
                         prvtCfmLbrReceiveOrder 1.3.6.1.4.1.738.1.5.131.1.7.2.1.2 unsigned32 no-access
An index to distinguish among multiple LBRs with the same LBR Transaction Identifier field value. This situation can appear in the case of multicast loopback.
                         prvtCfmLbrTime 1.3.6.1.4.1.738.1.5.131.1.7.2.1.3 unsigned32 read-only
Remote MEPs response time in milliseconds.
                         prvtCfmLbrMacAddress 1.3.6.1.4.1.738.1.5.131.1.7.2.1.4 macaddress read-only
Remote MEPs mac address. For unicast loopback this is the same as dot1agCfmMepTransmitLbmDestMacAddress, but for multicast loopback there will be different entries.
                         prvtCfmLbrBadMsdu 1.3.6.1.4.1.738.1.5.131.1.7.2.1.5 truthvalue read-only
Result of the Data TLV verification.
                 prvtCfmLtrTable 1.3.6.1.4.1.738.1.5.131.1.7.3 no-access
This table adds the possibility to measure the response time to a linktrace request.
                     prvtCfmLtrEntry 1.3.6.1.4.1.738.1.5.131.1.7.3.1 no-access
a
                         prvtCfmLtrTime 1.3.6.1.4.1.738.1.5.131.1.7.3.1.1 unsigned32 read-only
Remote MPs response time in milliseconds.
             prvtCfmMaAisLckVlan 1.3.6.1.4.1.738.1.5.131.1.8
                 prvtCfmMaAisLckVlanTable 1.3.6.1.4.1.738.1.5.131.1.8.1 no-access
Table includes extra variables needed for AIS/LCK configurable vlans
                     prvtCfmMaAisLckVlanEntry 1.3.6.1.4.1.738.1.5.131.1.8.1.1 no-access
Table includes extra variables needed for AIS/LCK configurable vlans
                         prvtCfmMaAisLckVlanId 1.3.6.1.4.1.738.1.5.131.1.8.1.1.1 vlanid read-write
Vlan ID (towards customer level) that the generated AIS/LCK packets should use.
                         prvtCfmMaAisLckVlanRowStatus 1.3.6.1.4.1.738.1.5.131.1.8.1.1.2 rowstatus read-only
The status of the row.
         prvtCfmMibConformance 1.3.6.1.4.1.738.1.5.131.2