POWERHUB-ATM-MIB: View SNMP OID List / Download MIB

VENDOR: FORE SYSTEMS


 Home MIB: POWERHUB-ATM-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 fore 1.3.6.1.4.1.326
         systems 1.3.6.1.4.1.326.2
             lsd 1.3.6.1.4.1.326.2.6
                 lsdproducts 1.3.6.1.4.1.326.2.6.1
                     powerhub4k6k7k 1.3.6.1.4.1.326.2.6.1.1
                         alchassis 1.3.6.1.4.1.326.2.6.1.1.1
                         alatm 1.3.6.1.4.1.326.2.6.1.1.2
                             alAtmAMASlotTable 1.3.6.1.4.1.326.2.6.1.1.2.8 no-access
A table that contains information about AMA for ATM slot in the PowerHub 7000 chassis.
                                 alAtmAMASlotEntry 1.3.6.1.4.1.326.2.6.1.1.2.8.1 no-access
AMA information about a specific slot.
                                     alAtmAMASlotNumber 1.3.6.1.4.1.326.2.6.1.1.2.8.1.1 integer read-only
The slot number for which the following AMA information applies.
                                     alAtmAMAUserSelect 1.3.6.1.4.1.326.2.6.1.1.2.8.1.2 integer read-write
The user specified AMA for normal operation. Unless the user explicitly changes the AMA assignments, the software uses the primary AMA by default and the backup AMA only if the link to the primary AMA fails. Enumeration: 'backup': 2, 'primary': 1.
                                     alAtmAMAActualUse 1.3.6.1.4.1.326.2.6.1.1.2.8.1.3 integer read-only
The AMA that is actually being used. If the link to the primary AMA fails, this field shows that the backup AMA is in use, even though the primary AMA was selected for use. Enumeration: 'backup': 2, 'primary': 1.
                                     alAtmAMAUTLevPrime 1.3.6.1.4.1.326.2.6.1.1.2.8.1.4 integer read-only
The PHY UTOPIA level in use by the PowerCell module and the Primary AMA. UTOPIA is an ATM standard for communication between the PowerCell module and the PHY (AMA). The level can be 1 or 2.
                                     alAtmAMAUTLevBack 1.3.6.1.4.1.326.2.6.1.1.2.8.1.5 integer read-only
The PHY UTOPIA level in use by the PowerCell module and the Backup AMA. UTOPIA is an ATM standard for communication between the PowerCell module and the PHY (AMA). The level can be 1 or 2. Returns value '1000' if Backup AMA is not installed
                                     alAtmAMAUTVerPrime 1.3.6.1.4.1.326.2.6.1.1.2.8.1.6 integer read-only
The version of the PHY UTOPIA in use by the PowerCell module and the Primary AMA.
                                     alAtmAMAUTVerBack 1.3.6.1.4.1.326.2.6.1.1.2.8.1.7 integer read-only
The version of the PHY UTOPIA in use by the PowerCell module and the Backup AMA. Returns value '1000' if Backup AMA is not installed
                                     alAtmAMAProtoPrime 1.3.6.1.4.1.326.2.6.1.1.2.8.1.8 integer read-only
The PHY-layer protocol in use on the Primary AMA. The protocol can be one of the following: 155M OC3 - 155 Mb/s using an OC-3 connector 45M DS3 - 45 Mb/s using a DS3 connector 39M E3 - 39 Mb/s using an E3 connector Enumeration: 'oc3-155Mbps': 1, 'unknown': 4, 'e3-39Mbps': 3, 'ds3-45Mbps': 2.
                                     alAtmAMAProtoBack 1.3.6.1.4.1.326.2.6.1.1.2.8.1.9 integer read-only
The PHY-layer protocol in use on the Backup AMA. The protocol can be one of the following: 155M OC3 - 155 Mb/s using an OC-3 connector 45M DS3 - 45 Mb/s using a DS3 connector 39M E3 - 39 Mb/s using an E3 connector Enumeration: 'oc3-155Mbps': 1, 'unknown': 4, 'e3-39Mbps': 3, 'ds3-45Mbps': 2.
                                     alAtmAMAMediaPrime 1.3.6.1.4.1.326.2.6.1.1.2.8.1.10 integer read-only
The type of cable connecting the Primary AMA to the ATM switch. The cable type can be one of the following: CAT5 UTP Coaxial Cable Multimode Fiber Single Mode Fiber Enumeration: 'unknown': 5, 'sf': 4, 'mf': 3, 'cat5utp': 1, 'coax': 2.
                                     alAtmAMAMediaBack 1.3.6.1.4.1.326.2.6.1.1.2.8.1.11 integer read-only
The type of cable connecting the Backup AMA to the ATM switch. The cable type can be one of the following: CAT5 UTP Coaxial Cable Multimode Fiber Single Mode Fiber Enumeration: 'unknown': 5, 'sf': 4, 'mf': 3, 'cat5utp': 1, 'coax': 2.
                                     alAtmPreviousAMA 1.3.6.1.4.1.326.2.6.1.1.2.8.1.12 integer read-only
The AMA that is actually being used before link down or cut over. The initial value is notset. Enumeration: 'unknown': 3, 'backup': 2, 'primary': 1.
                                     alAtmPreviousAMAType 1.3.6.1.4.1.326.2.6.1.1.2.8.1.13 integer read-only
The PHY-layer protocol in use before link down or cut-over. The protocol can be one of the following: 155M OC3 - 155 Mb/s using an OC-3 connector 45M DS3 - 45 Mb/s using a DS3 connector 39M E3 - 39 Mb/s using an E3 connector. Enumeration: 'oc3-155Mbps': 1, 'unknown': 4, 'e3-39Mbps': 3, 'ds3-45Mbps': 2.
                                     alAtmCurrentAMAType 1.3.6.1.4.1.326.2.6.1.1.2.8.1.14 integer read-only
The PHY-layer protocol actually in use. The protocol can be one of the following: 155M OC3 - 155 Mb/s using an OC-3 connector 45M DS3 - 45 Mb/s using a DS3 connector 39M E3 - 39 Mb/s using an E3 connector. Enumeration: 'oc3-155Mbps': 1, 'e3-39Mbps': 3, 'ds3-45Mbps': 2.
                               atmLinkUp 1.3.6.1.4.1.326.2.6.1.1.20.1
A LinkUp trap is sent by the ATM interface while link up is dected. The slot id is reported because individual virtual port number is not applicable here.
                               atmLinkDown 1.3.6.1.4.1.326.2.6.1.1.20.2
A LinkDown trap is sent by the ATM interface while link down is dected. The slot id is reported because individual virtual port number is not applicable here.
                               atmCutOver 1.3.6.1.4.1.326.2.6.1.1.20.3
A trap is sent if cut over is dected. The cut over can be from primary to back or vice versa.
                               atmBootUp 1.3.6.1.4.1.326.2.6.1.1.20.4
A BootUp trap is sent by the ATM interface while startup is dected. The slot id is reported because individual virtual port number is not applicable here.
                               atmFault 1.3.6.1.4.1.326.2.6.1.1.20.5
A Fault trap is sent by the ATM interface while a series of link down is dected. The slot id is reported because individual virtual port number is not applicable here.
                     powerbits 1.3.6.1.4.1.326.2.6.1.2
                 lsdcommon 1.3.6.1.4.1.326.2.6.2