PHIHONG-PoE-MIB: View SNMP OID List / Download MIB

VENDOR: PHIHONG USA


 Home MIB: PHIHONG-PoE-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 phihong 1.3.6.1.4.1.24852
             poeProduct 1.3.6.1.4.1.24852.2
                 poeProductsPart 1.3.6.1.4.1.24852.2.1 displaystring read-only
the POE controller Part.
                 poeSystem 1.3.6.1.4.1.24852.2.2
                     poeSystemActionHubReset 1.3.6.1.4.1.24852.2.2.1 integer read-write
Reset the POE controller. Enumeration: 'ready': 0, 'reset': 1.
                     poeSystemActionHubRestoreFactoryDefault 1.3.6.1.4.1.24852.2.2.2 integer read-write
Restore Factory Default to flash. resetpassword means when users forget the password,they can use this entry, and all of the snmp module parameters will be set to default values. Enumeration: 'ready': 0, 'restore': 1.
                     poeSystemActionHubSaveConfiguration 1.3.6.1.4.1.24852.2.2.3 integer read-write
Save the POE parameters to flash Enumeration: 'ready': 0, 'save': 1.
                     poeSystemAllPortPowerEnable 1.3.6.1.4.1.24852.2.2.4 integer read-write
Enables power supply in all port. Setting this object at a value enable(2) enables power and detection mechanism for all port. Setting this object at a value disable(1) disables power for all port. Enumeration: 'ready': 0, 'enable': 2, 'disable': 1.
                     poeSystemHWVersion 1.3.6.1.4.1.24852.2.2.6 displaystring read-only
System hardware version for the Main board
                     poeSystemNumberOfChannel 1.3.6.1.4.1.24852.2.2.7 integer read-only
Number of ports in the system
                     poeSystemProductPartNumber 1.3.6.1.4.1.24852.2.2.8 displaystring read-only
System Part Number for PowerHub
                     poeSystemFirmwareVersion 1.3.6.1.4.1.24852.2.2.10 displaystring read-only
System firmware version for the POE
                     poeSystemDescription 1.3.6.1.4.1.24852.2.2.11 displaystring read-write
System Description 10 characters
                     poeSystemConsumptionPower 1.3.6.1.4.1.24852.2.2.12 integer read-only
Measured usage power expressed in Watts.
                     poeSystemControlACPower 1.3.6.1.4.1.24852.2.2.13 integer read-write
describes the maximum available power in Watts to be supplied by the AC backup source to this device.
                     poeSystemControlDCPower 1.3.6.1.4.1.24852.2.2.14 integer read-write
describes the maximum available power in Watts to be supplied by the DC backup source to this device.
                     poeSystemControlBothPower 1.3.6.1.4.1.24852.2.2.15 integer read-write
describes the maximum available power in Watts to be supplied by Both AC and DC backup source to this device.
                     poeSystemParameters 1.3.6.1.4.1.24852.2.2.16 displaystring read-write
1st char:Knokoff enable,2nd char:AC Disconnect enable,3th char:Disable Power Management
                     poeSystemSnmpVersion 1.3.6.1.4.1.24852.2.2.17 displaystring read-only
The software version for the SNMP device
                     poeSystemPerPortPowerEnable 1.3.6.1.4.1.24852.2.2.18 displaystring read-write
Enables power supply in all port. Setting this object at a value enable(2) enables power and detection mechanism for all port. Setting this object at a value disable(1) disables power for all port.
                     poeSystemStatus 1.3.6.1.4.1.24852.2.2.19 integer read-only
The status of the POE. Enumeration: 'overheat': 1, 'normal': 0.
                 poePortTable 1.3.6.1.4.1.24852.2.3 no-access
                     poePortEntry 1.3.6.1.4.1.24852.2.3.1 no-access
port entry containing data regarding a particular port
                         poePortIndex 1.3.6.1.4.1.24852.2.3.1.1 integer read-only
A unique value for each port.
                         poePortPowerEnable 1.3.6.1.4.1.24852.2.3.1.2 integer read-write
Enables power supply on this port. Setting this object at a value enable(2) enables power and detection mechanism for this port. Setting this object at a value disable(1) disables power for this port. Enumeration: 'enable': 2, 'disable': 1.
                         poePortControlMaxPower 1.3.6.1.4.1.24852.2.3.1.3 integer read-write
This command specifies the max power in [mWatts] to that port. IF you set this value it will take out this port from the auto mode. The value MUST be more then 0
                         poePortDescription 1.3.6.1.4.1.24852.2.3.1.6 displaystring read-write
Port Description 10 characters
                         poePortDetectionStatus 1.3.6.1.4.1.24852.2.3.1.7 integer read-only
Port Detection, show the detection status of each port Enumeration: 'discC': 2, 'off': 0, 'ramPOEown': 5, 'sampleI': 8, 'rampUp': 4, 'discR': 1, 'sampleV': 9, 'class': 3.
                         poePortPowerClassifications 1.3.6.1.4.1.24852.2.3.1.8 integer read-only
Port Power Classifications, show the classification of each port Enumeration: 'class4': 5, 'class2': 3, 'class3': 4, 'class0': 1, 'class1': 2.
                         poePortPowerDetectionControl 1.3.6.1.4.1.24852.2.3.1.9 integer read-write
Port Power Detection Control, enable or disable the Power Limit for Management Enumeration: 'disabled': 1, 'enabled': 2.
                         poePortPowerPriority 1.3.6.1.4.1.24852.2.3.1.10 integer read-write
Port Power Priority, show the priority of each port Enumeration: 'high': 2, 'critical': 1, 'low': 3.
                         poePortPower 1.3.6.1.4.1.24852.2.3.1.11 integer read-only
Port Actual Power (in mWattes).
                         poePortVoltage 1.3.6.1.4.1.24852.2.3.1.12 displaystring read-only
Port Voltage (in dVoltage).
                         poePortCurrent 1.3.6.1.4.1.24852.2.3.1.13 integer read-only
Port Current (in mAmps).
                         poePortResistance 1.3.6.1.4.1.24852.2.3.1.14 integer read-only
Port Resistance (in ohms).
                         poePortFlags 1.3.6.1.4.1.24852.2.3.1.15 displaystring read-only
1st char:classification(0-3),2nd char:Port bypass detection enable,3th char:Port bypass classifiation enable,4th cahr:Port bypass powerup enable,5th char:Port bypass sampling enable.
                         poePortBypassFlags 1.3.6.1.4.1.24852.2.3.1.16 displaystring read-write
1st char:Port bypass detection enable,2nd char:Port bypass classifiation enable,3th cahr:Port bypass powerup enable,4th char:Port bypass sampling enable.
                         poePortUseClassificationforPowerLimit 1.3.6.1.4.1.24852.2.3.1.17 integer read-write
Use Port classification for power limit , enable or disable the Port classification for power limit. Enumeration: 'disabled': 1, 'enabled': 2.
                         poePortLegacyDetection 1.3.6.1.4.1.24852.2.3.1.18 integer read-write
Use Port legacy detection , enable or disable the Port legacy detection. Enumeration: 'disabled': 1, 'enabled': 2.
                 poeTrapsControlTable 1.3.6.1.4.1.24852.2.4 no-access
A table of objects that display and control the Traps on a PSM device.
                     poeTrapsControlEntry 1.3.6.1.4.1.24852.2.4.1 no-access
A set of objects that control the Trap events.
                         poeTrapsControlGroupIndex 1.3.6.1.4.1.24852.2.4.1.1 integer no-access
This variable uniquely identifies the group.
                         poeTrapsControlEnable 1.3.6.1.4.1.24852.2.4.1.2 integer read-write
Enable Traps from Agent Enumeration: 'trapsDisabled': 1, 'trapsEnabled': 2.
                 poeTraps 1.3.6.1.4.1.24852.2.5
                     poePortHWFailTrap 1.3.6.1.4.1.24852.2.5.1
This trap indicate UV0v failure /UV0v Spike failure /Device A2d failure.
                     poePortPeakOverCurrentTrap 1.3.6.1.4.1.24852.2.5.2
This trap indicate peak over current failure.
                     poePortOverloadTrap 1.3.6.1.4.1.24852.2.5.3
This trap indicate overload failure. If you put at least 400mA on the output, you will see if your traps work
                     poePortDiscoveryFailTrap 1.3.6.1.4.1.24852.2.5.4
This trap indicate Discovery failure/ Discovery VA2 failure/Discovery RA2 failure/Sample Discovery A2d Failure.
                     poePortClassificationFailTrap 1.3.6.1.4.1.24852.2.5.5
This trap indicate Class Violation failure/ Classification A2d failure.
                     poePortDisconnectTrap 1.3.6.1.4.1.24852.2.5.6
This trap indicate port is disconnected.
                     poePortVoltageFailTrap 1.3.6.1.4.1.24852.2.5.7
This trap indicate if PSM Port is no voltage failure.
                     poeSystemOverheatTrap 1.3.6.1.4.1.24852.2.5.8
This trap indicate if PSM is overheat.