PDN-HEALTHANDSTATUS-MIB: View SNMP OID List / Download MIB

VENDOR: PARADYNE


 Home MIB: PDN-HEALTHANDSTATUS-MIB
Download as:   

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 devStatus 1.3.6.1.4.1.1795.2.24.2.4.1
     devHealthAndStatus 1.3.6.1.4.1.1795.2.24.2.4.1.1 displaystring read-only
Health and Status of the device. Health & Status is represented as a concatenation of health and status message strings, where each message string is separated by a semi-colon. Refer to device-specific user documentation for a complete description of the Health and Status codes.
     devSelfTestResults 1.3.6.1.4.1.1795.2.24.2.4.1.2 displaystring read-only
Self-test results. Self-test (or power-up test) results summarizes the test results of each CCA, where each CCA test result is separated by a semi-colon. Refer to device-specific user documentation for a complete description of the self test codes and messages.
     devAbortStatus 1.3.6.1.4.1.1795.2.24.2.4.1.3 displaystring read-only
Abort Status. The devAbortStatus object is used to retrieve the latest abort status that is stored in the agent. The agent will need to save the latest abort information in non-volatile memory so that it will be available immediately after a fatal reset. How long the latest failure information is remembered after this point is an implementation issue. Refer to device-specific user documentation for a complete description of the abort codes and/or messages.
     devSNMPSetStatusTable 1.3.6.1.4.1.1795.2.24.2.4.1.4 no-access
A table containing SNMP Set command Statuses when an error occurs. It contains maximum of 5 entries. Oldest entry is pushed out when the table is full and a new entry is added.
         devSNMPSetStatusEntry 1.3.6.1.4.1.1795.2.24.2.4.1.4.1 no-access
The information regarding each SNMP Set command Status when en error occurs. Each entry is index by a request ID generated by the client and attached to the UDP when the Set command is sent.
             devSNMPSetReqId 1.3.6.1.4.1.1795.2.24.2.4.1.4.1.1 integer read-only
The Request ID which identifies the SNMP Set command in error.
             devSNMPSetStatus 1.3.6.1.4.1.1795.2.24.2.4.1.4.1.2 displaystring read-only
Indicates the error message string associated with the Set command of this row in the table.
     devAuthenticationFailureIpAddress 1.3.6.1.4.1.1795.2.24.2.4.1.5 ipaddress read-only
Authentication Failure Ip Address is used when a authenticationFailure trap is generated. The single varbind represents the ip address causing the error. If the ip address is not known, 0.0.0.0 is used.
     devLastTrapString 1.3.6.1.4.1.1795.2.24.2.4.1.6 displaystring read-only
This object contains a textual description of the last trap that was processed by the device. The exact text in the description is device specific and should be contained user documentation outside of this MIB. It is recommended that the important information is contained within the first 100 characters.
     devFailureStatus 1.3.6.1.4.1.1795.2.24.2.4.1.7 displaystring read-only
Device Failure status. Conditions that cause failure are further described in the device documentation.
     devStatusTrapEnable 1.3.6.1.4.1.1795.2.24.2.4.1.8 integer read-write
This object provides ability to enable or disable individual enterprise traps. The object is bit map represented as a sum. The bit positions are: 1 deviceSelfTestFailure 2 deviceFailure
     devSelfTestResultTable 1.3.6.1.4.1.1795.2.24.2.4.1.9 no-access
A table containing results of power on selftest for the whole unit.
         devSelfTestResultEntry 1.3.6.1.4.1.1795.2.24.2.4.1.9.1 no-access
The information regarding each SelfTest on each unit.
             devSelfTestResult 1.3.6.1.4.1.1795.2.24.2.4.1.9.1.1 displaystring read-only
Self-test results. Self-test (or power-up test) results summarizes the test results of each interface, where each CCA test result is separated by a semi-colon. Refer to device-specific user documentation for a complete description of the self test codes and messages.
       devSelfTestFailure 1.3.6.1.4.1.1795.2.24.2.4.10.1
This trap signifies that the sending protocol's device has failed self test. The variable binding for this trap would be the selfTest devSelfTestResults object of the Health and Status MIB. The exact format of this display string will be well-documented in the Operational Specifications of the device.
       deviceFailure 1.3.6.1.4.1.1795.2.24.2.4.10.2
This trap signifies that the sending protocol's device has failed and the failure was not a result of a device test.