PDN-DS3EXT-MIB: View SNMP OID List / Download MIB

VENDOR: PARADYNE


 Home MIB: PDN-DS3EXT-MIB
Download as:   

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 pdnDs3MIB 1.3.6.1.4.1.1795.2.24.2.6.14
This MIB Module extends the DS3-MIB defined in rfc2496
       devDs3Objects 1.3.6.1.4.1.1795.2.24.2.6.14.1
           devDs3ConfigTable 1.3.6.1.4.1.1795.2.24.2.6.14.1.1 no-access
The Paradyne Ds3-MIB Table Augment.
               devDs3ConfigEntry 1.3.6.1.4.1.1795.2.24.2.6.14.1.1.1 no-access
An entry in the Paradyne Ds3-MIB Table.
                   devDs3ConfigIfIndex 1.3.6.1.4.1.1795.2.24.2.6.14.1.1.1.1 integer32 read-only
The index value which uniquely identifies the interface for which this entry contains information on interface tests. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex from the Interfaces table of MIB II (RFC 1213).
                   devDs3ConfigFramingType 1.3.6.1.4.1.1795.2.24.2.6.14.1.1.1.2 integer read-write
The option provides the support for Direct Mapping or Physicial Layer Convergence Protocol (PLCP) mapping of ATM Cells into a Ds3 C-Bit Parity Format Enumeration: 'plcp': 2, 'direct': 1.
                   devDs3ConfigIgnoreCbit 1.3.6.1.4.1.1795.2.24.2.6.14.1.1.1.3 integer read-write
Since not all networks support the C-Bit, we allow the ability to disable the accumulation of C-Bit errors and the generation of C-Bit Alarms. Enumeration: 'yes': 2, 'no': 1.
                   devDs3ConfigTimingMarkerCode 1.3.6.1.4.1.1795.2.24.2.6.14.1.1.1.4 integer read-write
The option supports the ability to send a 'Timing Marker' code to the far end. Enumeration: 'traceable': 1, 'notTraceable': 2.
           devDs3CurrentTable 1.3.6.1.4.1.1795.2.24.2.6.14.1.2 no-access
The Paradyne Extension to the Near End Current Table of the DS3-MIB.
               devDs3CurrentEntry 1.3.6.1.4.1.1795.2.24.2.6.14.1.2.1 no-access
An entry in the Paradyne Extension to the dsx3CurrentTable of the DS3-MIB.
                   devDs3CurrentEB 1.3.6.1.4.1.1795.2.24.2.6.14.1.2.1.1 perfcurrentcount read-only
The counter associated with the number of Errored Blocks
                   devDs3CurrentES 1.3.6.1.4.1.1795.2.24.2.6.14.1.2.1.2 perfcurrentcount read-only
The counter associated with the number of Errored Seconds
                   devDs3CurrentSES 1.3.6.1.4.1.1795.2.24.2.6.14.1.2.1.3 perfcurrentcount read-only
The counter associated with the number of Severly Errored Seconds
                   devDs3CurrentPlcpSEFS 1.3.6.1.4.1.1795.2.24.2.6.14.1.2.1.4 perfcurrentcount read-only
The counter associated with the number of PLCP Severely Errored Framing Seconds
           devDs3IntervalTable 1.3.6.1.4.1.1795.2.24.2.6.14.1.3 no-access
The Paradyne Extension to the Near End Interval Table of the DS3-MIB.
               devDs3IntervalEntry 1.3.6.1.4.1.1795.2.24.2.6.14.1.3.1 no-access
An entry in the Paradyne Extension to the dsx3IntervalTable of the DS3-MIB.
                   devDs3IntervalEB 1.3.6.1.4.1.1795.2.24.2.6.14.1.3.1.1 perfintervalcount read-only
The counter associated with the number of Errored Blocks
                   devDs3IntervalES 1.3.6.1.4.1.1795.2.24.2.6.14.1.3.1.2 perfintervalcount read-only
The counter associated with the number of Errored Seconds
                   devDs3IntervalSES 1.3.6.1.4.1.1795.2.24.2.6.14.1.3.1.3 perfintervalcount read-only
The counter associated with the number of Severly Errored Seconds
                   devDs3IntervalPlcpSEFS 1.3.6.1.4.1.1795.2.24.2.6.14.1.3.1.4 perfintervalcount read-only
The counter associated with the number of PLCP Severely Errored Framing Seconds
           devDs3TotalTable 1.3.6.1.4.1.1795.2.24.2.6.14.1.4 no-access
The Paradyne Extension to the Near End Total Table of the DS3-MIB.
               devDs3TotalEntry 1.3.6.1.4.1.1795.2.24.2.6.14.1.4.1 no-access
An entry in the Paradyne Extension to the dsx3TotalTable of the DS3-MIB.
                   devDs3TotalEB 1.3.6.1.4.1.1795.2.24.2.6.14.1.4.1.1 perftotalcount read-only
The counter associated with the number of Errored Blocks
                   devDs3TotalES 1.3.6.1.4.1.1795.2.24.2.6.14.1.4.1.2 perftotalcount read-only
The counter associated with the number of Errored Seconds
                   devDs3TotalSES 1.3.6.1.4.1.1795.2.24.2.6.14.1.4.1.3 perftotalcount read-only
The counter associated with the number of Severly Errored Seconds
                   devDs3TotalPlcpSEFS 1.3.6.1.4.1.1795.2.24.2.6.14.1.4.1.4 perftotalcount read-only
The counter associated with the number of PLCP Severely Errored Framing Seconds
           devDs3FreeRunTable 1.3.6.1.4.1.1795.2.24.2.6.14.1.5 no-access
The Paradyne Free Running Total of the performance stats.
               devDs3FreeRunEntry 1.3.6.1.4.1.1795.2.24.2.6.14.1.5.1 no-access
An entry in the Paradyne Free Running Total Table.
                   devDs3FreeRunPES 1.3.6.1.4.1.1795.2.24.2.6.14.1.5.1.1 perftotalcount read-only
The counter associated with the number of P bit Errored Seconds.
                   devDs3FreeRunPSES 1.3.6.1.4.1.1795.2.24.2.6.14.1.5.1.2 perftotalcount read-only
The counter associated with the number of P bit Severely Errored Seconds.
                   devDs3FreeRunPSEFS 1.3.6.1.4.1.1795.2.24.2.6.14.1.5.1.3 perftotalcount read-only
The counter associated with the number of Severely Errored Frame Seconds.
                   devDs3FreeRunUAS 1.3.6.1.4.1.1795.2.24.2.6.14.1.5.1.4 perftotalcount read-only
The counter associated with the number of Unavailable Seconds.
                   devDs3FreeRunLCV 1.3.6.1.4.1.1795.2.24.2.6.14.1.5.1.5 perftotalcount read-only
The counter associated with the number of Line Coding Violations.
                   devDs3FreeRunPCV 1.3.6.1.4.1.1795.2.24.2.6.14.1.5.1.6 perftotalcount read-only
The counter associated with the number of P bit Coding Violations.
                   devDs3FreeRunLES 1.3.6.1.4.1.1795.2.24.2.6.14.1.5.1.7 perftotalcount read-only
The counter associated with the number of Line Erroed Seconds.
                   devDs3FreeRunCCV 1.3.6.1.4.1.1795.2.24.2.6.14.1.5.1.8 perftotalcount read-only
The counter associated with the number of C bit Coding Violations.
                   devDs3FreeRunCES 1.3.6.1.4.1.1795.2.24.2.6.14.1.5.1.9 perftotalcount read-only
The counter associated with the number of C bit Errored Seconds.
                   devDs3FreeRunCSES 1.3.6.1.4.1.1795.2.24.2.6.14.1.5.1.10 perftotalcount read-only
The counter associated with the number of C bit Severly Errored Seconds.