PDN-DS1EXT-MIB: View SNMP OID List / Download MIB

VENDOR: PARADYNE


 Home MIB: PDN-DS1EXT-MIB
Download as:   
SNMPv2-CONF, IF-MIB, SNMPv2-SMI, PDN-HEADER-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 pdnDs1Ext 1.3.6.1.4.1.1795.2.24.2.6.5.5
The Paradyne enterprise DS1/G.703 extension MIB. This MIB provides additional DS1 and G.703 (E1) configuration objects not provided by rfc2495.
     pdnDs1ExtObjects 1.3.6.1.4.1.1795.2.24.2.6.5.5.1
         pdnDs1ExtConfTable 1.3.6.1.4.1.1795.2.24.2.6.5.5.1.1 no-access
The Paradyne DS1/G.703 extension configuration table. This table is used for configuring extensions to DS1 and G.703 interfaces.
             pdnDs1ExtConfEntry 1.3.6.1.4.1.1795.2.24.2.6.5.5.1.1.1 no-access
An entry in the Paradyne DS1/G.703 extension configuration table. Note: The objects used depend on the type of interface. For DS1: use pdnDs1ExtConfLineLengthType and one of (pdnDs1ExtConfLineLength or pdnDs1ExtConfLineBuildOut) For G.703: use pdnDs1ExtConfLineLengthType and pdnDs1ExtConfConnector
                 pdnDs1ExtConfLineLengthType 1.3.6.1.4.1.1795.2.24.2.6.5.5.1.1.1.1 integer read-write
This entry specifies the type of loop length for the interface. short-haul is intended for intra-building use. long-haul is intended for inter-building use. Enumeration: 'longHaul': 2, 'shortHaul': 1.
                 pdnDs1ExtConfLineLength 1.3.6.1.4.1.1795.2.24.2.6.5.5.1.1.1.2 integer read-write
This entry specifies the loop length, in feet, for a short-haul DS1 line. This object only applies to DS1 interfaces. Note: This object shares a mutually exclusive relationship with the pdnDs1ExtConfLineBuildOut object i.e. only one of the two can be used for configuration at one time, based on the pdnDs1ExtConfLineLengthType object. Enumeration: 'feet400To533': 4, 'feet000To133': 1, 'feet534To655': 5, 'feet267To399': 3, 'feet134To266': 2.
                 pdnDs1ExtConfLineBuildOut 1.3.6.1.4.1.1795.2.24.2.6.5.5.1.1.1.3 integer read-write
This entry specifies the line build out, in decibels, for a long-haul DS1 line. dB0Pnt0 = 0.0 dB dB7Pnt5 = -7.5 dB dB15Pnt0 = -15.0 dB dB22Pnt5 = -22.5 dB This object only applies to DS1 interfaces. Note: This object shares a mutually exclusive relationship with the pdnDs1ExtConfLineLength object i.e. only one of the two can be used for configuration at one time, based on the pdnDs1ExtConfLineLengthType object. Enumeration: 'dB22Pnt5': 4, 'dB7Pnt5': 2, 'dB15Pnt0': 3, 'dB0Pnt0': 1.
                 pdnDs1ExtConfConnector 1.3.6.1.4.1.1795.2.24.2.6.5.5.1.1.1.4 integer read-write
This entry specifies the type of connector to be used. This object only applies to G.703 interfaces. bnc: 75-Ohm connector supporting only short-haul. rj48: 120-Ohm connector supporting both short-haul and long-haul. Enumeration: 'bnc': 1, 'rj48': 2.
     pdnDs1ExtConformance 1.3.6.1.4.1.1795.2.24.2.6.5.5.2
         pdnDs1ExtGroups 1.3.6.1.4.1.1795.2.24.2.6.5.5.2.1
             pdnDs1ExtT1ConfigGroup 1.3.6.1.4.1.1795.2.24.2.6.5.5.2.1.1
A collection of configuration objects required for configuring a T1 interface.
             pdnDs1ExtE1ConfigGroup 1.3.6.1.4.1.1795.2.24.2.6.5.5.2.1.2
A collection of configuration objects required for configuring a G.703 (E1) interface.
         pdnDs1ExtCompliances 1.3.6.1.4.1.1795.2.24.2.6.5.5.2.2
             pdnDs1ExtCompliance 1.3.6.1.4.1.1795.2.24.2.6.5.5.2.2.1
Compliance statement for using this MIB for configuring DS1 interfaces.
             pdnDs1ExtG703Compliance 1.3.6.1.4.1.1795.2.24.2.6.5.5.2.2.2
Compliance statement for using this MIB for configuring G.703 interfaces.