PDN-DIAGNOSTICS-MIB: View SNMP OID List / Download MIB

VENDOR: PARADYNE


 Home MIB: PDN-DIAGNOSTICS-MIB
Download as:   
SNMPv2-CONF, IF-MIB, SNMPv2-SMI, PDN-HEADER-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 diagTestMIBObjects 1.3.6.1.4.1.1795.2.24.2.16.1
     diagIfTest 1.3.6.1.4.1.1795.2.24.2.16.1.1
         ifLoopbackTestTable 1.3.6.1.4.1.1795.2.24.2.16.1.1.1 no-access
This table contains input and results of a packet loopback test. This table is indexed by ifIndex. This is a interface related test. There can be only one test running per interface. This table should be used in conjunction with ifTestTable(Rfc 1573) with all the semantics of ifTestTable.
             ifLoopbackTestEntry 1.3.6.1.4.1.1795.2.24.2.16.1.1.1.1 no-access
An entry containing objects for test input and result for packet loopback test
                 loopbackTestInputNumCycles 1.3.6.1.4.1.1795.2.24.2.16.1.1.1.1.1 integer read-write
This object corresponds the number of cycles the test to be run for. One cycle corresponds to a 15 second interval. The default value for this object is 40.
                 loopbackTestResultsPktsSent 1.3.6.1.4.1.1795.2.24.2.16.1.1.1.1.2 integer read-only
This object corresponds to the number of packets sent
                 loopbackTestResultsPktsRcvdOK 1.3.6.1.4.1.1795.2.24.2.16.1.1.1.1.3 integer read-only
This object corresponds to the number of packets which were received without any error
                 loopbackTestResultsPktsRcvdErr 1.3.6.1.4.1.1795.2.24.2.16.1.1.1.1.4 integer read-only
This object corresponds to the number of packets which were received with errors
                 loopbackTestResultsPktsNotRcvd 1.3.6.1.4.1.1795.2.24.2.16.1.1.1.1.5 integer read-only
This object corresponds to the number of packets which were sent but not received
                 loopbackTestResultsPktErrorRate 1.3.6.1.4.1.1795.2.24.2.16.1.1.1.1.6 displaystring read-only
Reflects the error rate of the loopback test. this string will represent a floating point number of the form [ErrRate][eE][+-][ErrRateBase] where ErrRate and ErrRateBase are integers. In Other Words ErrRate * [10^ -ErrRateBase] shown below are example of the values returned. 123456E-5 = 1.23456 344567e-6 = 0.344567
                 loopbackTestResultsErrSecs 1.3.6.1.4.1.1795.2.24.2.16.1.1.1.1.7 integer read-only
This object corresponds to the number of errored seconds
                 loopbackTestResultsSvrErrSecs 1.3.6.1.4.1.1795.2.24.2.16.1.1.1.1.8 integer read-only
This object corresponds to the number of severely errored seconds
                 loopbackTestResultsElpTime 1.3.6.1.4.1.1795.2.24.2.16.1.1.1.1.9 integer read-only
This object corresponds to the number of seconds elapsed since the start of the test.
         ifBERTObjectsTable 1.3.6.1.4.1.1795.2.24.2.16.1.1.2 no-access
This table contains the objects for Bit Error Rate Test. This table is indexed by ifIndex.
             ifBERTObjectsEntry 1.3.6.1.4.1.1795.2.24.2.16.1.1.2.1 no-access
An Entry containing objects of BERT.
                 ifBERTTestDuration 1.3.6.1.4.1.1795.2.24.2.16.1.1.2.1.1 integer read-write
This object represents the test duration in seconds.
                 ifBERTElapsedTime 1.3.6.1.4.1.1795.2.24.2.16.1.1.2.1.2 integer read-only
This object represents the elapsed time in seconds.
                 ifBERTDownSyncUP 1.3.6.1.4.1.1795.2.24.2.16.1.1.2.1.3 integer read-only
This object indicates whether Downstream sync is enabled . Enumeration: 'yes': 1, 'no': 2.
                 ifBERTUpSyncUP 1.3.6.1.4.1.1795.2.24.2.16.1.1.2.1.4 integer read-only
This object indicates whether upstream sync is enabled. Enumeration: 'yes': 1, 'no': 2.
                 ifBERTSegmentsSent 1.3.6.1.4.1.1795.2.24.2.16.1.1.2.1.5 integer read-only
This object represents the number of segments sent during the test
                 ifBERTDownMBitsRcvd 1.3.6.1.4.1.1795.2.24.2.16.1.1.2.1.6 integer read-only
This represents the number of million bits rcvd downstream.
                 ifBERTUpMBitsRcvd 1.3.6.1.4.1.1795.2.24.2.16.1.1.2.1.7 integer read-only
This represents the number of million bits rcvd upstream.
                 ifBERTDownBitErrDetected 1.3.6.1.4.1.1795.2.24.2.16.1.1.2.1.8 integer read-only
This represents the number of bit errors detected downstream.
                 ifBERTUpBitErrDetected 1.3.6.1.4.1.1795.2.24.2.16.1.1.2.1.9 integer read-only
This represents the number of bit errors detected upstream.
                 ifBERTDownBitErrRate 1.3.6.1.4.1.1795.2.24.2.16.1.1.2.1.10 displaystring read-only
This string will represent a floating point number of the form [Er rRate] [eE] [+-] [ErrRatebase] where ErrTare and errRateBase are integers.
                 ifBERTUpBitErrRate 1.3.6.1.4.1.1795.2.24.2.16.1.1.2.1.11 displaystring read-only
This object reflects the error rate of BERT in Upstream direction. This string will represent a floating point number of the form [ErrRate] [eE] [+-] [ErrRatebase] where ErrTare and errRateBase are integers.
                 ifBERTDownErroredSecs 1.3.6.1.4.1.1795.2.24.2.16.1.1.2.1.12 integer read-only
This represents number of errored seconds downstream. Errored second is a second in which there is at least 1 block error.
                 ifBERTUpErroredSecs 1.3.6.1.4.1.1795.2.24.2.16.1.1.2.1.13 integer read-only
This represents number of errored seconds upstream. Errored second is a second in which there is at least 1 block error.
                 ifBERTDownLineRate 1.3.6.1.4.1.1795.2.24.2.16.1.1.2.1.14 integer read-only
This represents the downstream line rate in KBPS
                 ifBERTUpLineRate 1.3.6.1.4.1.1795.2.24.2.16.1.1.2.1.15 integer read-only
This represents the Upstream line rate in KBPS
                 ifBERTDownMargin 1.3.6.1.4.1.1795.2.24.2.16.1.1.2.1.16 integer read-only
This represents the Downstream margin in decibels (DB).
                 ifBERTUpMargin 1.3.6.1.4.1.1795.2.24.2.16.1.1.2.1.17 integer read-only
This represents the upstream margin in decibels (DB).
     diagApplTest 1.3.6.1.4.1.1795.2.24.2.16.1.2
         applMaxNumberOfTests 1.3.6.1.4.1.1795.2.24.2.16.1.2.1 integer read-only
This object identifies the maximum number of application based tests that can be simultaneously instantiated on the device.
         applCurrentNumberOfTests 1.3.6.1.4.1.1795.2.24.2.16.1.2.2 integer read-only
This object identifies the current number of application based tests that are running on the device.
         applStopAllTests 1.3.6.1.4.1.1795.2.24.2.16.1.2.3 integer read-write
The value of this object corresponds to stop all application based tests on the device. noOp -- no operation stop -- all the application tests will be stopped but current test results are still available stopAndClear -- all the application tests will be stoped and the results are cleared also Enumeration: 'stop': 2, 'noOp': 1, 'stopAndClear': 3.
         applNewTestId 1.3.6.1.4.1.1795.2.24.2.16.1.2.4 integer read-only
This value of this object corresponds to getting a magic number to start an application based test. The magic number is used as an index to create a row for the diagApplTestTable. If no new rows can be created, this object will have a value of 0.
         applTestStatusTable 1.3.6.1.4.1.1795.2.24.2.16.1.2.5 no-access
This table controls all the application tests. It defines a test type, starts a test, and clears a test.
             applTestStatusEntry 1.3.6.1.4.1.1795.2.24.2.16.1.2.5.1 no-access
An entry containing objects for invoking application based tests
                 applTestId 1.3.6.1.4.1.1795.2.24.2.16.1.2.5.1.1 integer read-only
A unique ID to identify each application test.
                 applTestType 1.3.6.1.4.1.1795.2.24.2.16.1.2.5.1.2 autonomoustype read-write
This object defines the application test type.
                 applTestStatus 1.3.6.1.4.1.1795.2.24.2.16.1.2.5.1.3 integer read-only
This object shows the current status of an application test. none - indicates waiting for test parameters. inProgress - indicates the test is in process. success - indicates the test is completed. failed - indicates the test is failed. abort - indicates the test was aborted Enumeration: 'failed': 4, 'none': 1, 'abort': 5, 'inProgress': 2, 'success': 3.
                 applTestErrorCode 1.3.6.1.4.1.1795.2.24.2.16.1.2.5.1.4 integer read-only
This object shows the reason for a test failure. Enumeration: 'none': 1, 'systemError': 4, 'icmpError': 3, 'timeout': 2.
                 applTestOwner 1.3.6.1.4.1.1795.2.24.2.16.1.2.5.1.5 displaystring read-write
The network manager who has started the test
                 applTestRowStatus 1.3.6.1.4.1.1795.2.24.2.16.1.2.5.1.6 rowstatus read-write
This object is used to create a new row or delete an existing row for an application test.
         applPingTestTable 1.3.6.1.4.1.1795.2.24.2.16.1.2.6 no-access
This table contains objects which allow network manager to ping a destination.
             applPingTestEntry 1.3.6.1.4.1.1795.2.24.2.16.1.2.6.1 no-access
This table contains the input parameters for a ping test and the results of the ping test.
                 applPingTestId 1.3.6.1.4.1.1795.2.24.2.16.1.2.6.1.1 integer read-only
A unique ID to identify each application test.
                 applPingTestIpAddress 1.3.6.1.4.1.1795.2.24.2.16.1.2.6.1.2 ipaddress read-write
The IP address to be pinged.
                 applPingTestSourceIpAddr 1.3.6.1.4.1.1795.2.24.2.16.1.2.6.1.3 ipaddress read-write
The Source IP address where we are pinging from. This is an optional object for some devices. See operational specification for its use.
                 applPingTestPacketSize 1.3.6.1.4.1.1795.2.24.2.16.1.2.6.1.4 integer read-write
This object corresponds to the size of the packet (in bytes) which will be sent during the Ping test. The default value for this object is 64 bytes
                 applPingTestTimeout 1.3.6.1.4.1.1795.2.24.2.16.1.2.6.1.5 integer read-write
This object corresponds to a timeout value (in seconds) between Pings. The default value for this object is 5 seconds
                 applPingTestMaxPings 1.3.6.1.4.1.1795.2.24.2.16.1.2.6.1.6 integer read-write
This object corresponds to the maximum number of times the device should Ping for the destination. The default value for this object is 10
                 applPingTestPktsSent 1.3.6.1.4.1.1795.2.24.2.16.1.2.6.1.7 integer read-only
This object corresponds to the total number of packets sent.
                 applPingTestPktsRecv 1.3.6.1.4.1.1795.2.24.2.16.1.2.6.1.8 integer read-only
This object corresponds to the total number of packets received without error
                 applPingTestMinTime 1.3.6.1.4.1.1795.2.24.2.16.1.2.6.1.9 integer read-only
The minimum round trip time.
                 applPingTestMaxTime 1.3.6.1.4.1.1795.2.24.2.16.1.2.6.1.10 integer read-only
The maximum round trip time.
                 applPingTestAvgTime 1.3.6.1.4.1.1795.2.24.2.16.1.2.6.1.11 integer read-only
The average round trip time.
                 applPingTestDomain 1.3.6.1.4.1.1795.2.24.2.16.1.2.6.1.12 integer read-write
This object specifies the destination ip address's domain. The Default is service domain. Not allowed if source ip address is entered. This is an optional object for some devices. See operational specification its use. Enumeration: 'noop': 1, 'service': 3, 'mgmt': 2.
                 applPingTestIfIndex 1.3.6.1.4.1.1795.2.24.2.16.1.2.6.1.13 integer read-write
This object specifies the interface over which the ping test will take place.
         applTracerouteConfigTable 1.3.6.1.4.1.1795.2.24.2.16.1.2.7 no-access
This table contains objects which allow network manager to enter the parameters of a traceroute test.
             applTracerouteConfigEntry 1.3.6.1.4.1.1795.2.24.2.16.1.2.7.1 no-access
This table contains the input parameters for a traceroute test.
                 applTracerouteTestId 1.3.6.1.4.1.1795.2.24.2.16.1.2.7.1.1 integer read-only
A unique ID to identify each application test.
                 applTracerouteIpAddress 1.3.6.1.4.1.1795.2.24.2.16.1.2.7.1.2 ipaddress read-write
The destination IP address of a traceroute test.
                 applTracerouteSourceIpAddr 1.3.6.1.4.1.1795.2.24.2.16.1.2.7.1.3 ipaddress read-write
The source IP address of where the traceroute test started. This is an optional object for some devices. See operational specification for its use.
                 applTraceroutePktsSize 1.3.6.1.4.1.1795.2.24.2.16.1.2.7.1.4 integer read-write
This object corresponds to the size of the packet (in bytes) which will be sent during the traceroute test. The default value for this object is 38 bytes
                 applTracerouteTimeout 1.3.6.1.4.1.1795.2.24.2.16.1.2.7.1.5 integer read-write
This object corresponds to a timeout value (in seconds) of a traceroute test. The default value for this object is 5 seconds
                 applTracerouteMaxHops 1.3.6.1.4.1.1795.2.24.2.16.1.2.7.1.6 integer read-write
This object corresponds to the maximum number of hops to reach the destination. The default value for this object is device specific. See Operational Specifications
                 applTracerouteDomain 1.3.6.1.4.1.1795.2.24.2.16.1.2.7.1.7 integer read-write
This object specifies the destination ip address's domain. The Default is service domain. Not allowed if source ip address is entered. This is an optional object for some devices. See operational specification its use. Enumeration: 'noop': 1, 'service': 3, 'mgmt': 2.
                 applTracerouteIfIndex 1.3.6.1.4.1.1795.2.24.2.16.1.2.7.1.8 integer read-write
This object specifies the interface over which the trace-route test will take place.
         applTracerouteResultTable 1.3.6.1.4.1.1795.2.24.2.16.1.2.8 no-access
This table contains results of traceroute test.
             applTracerouteResultEntry 1.3.6.1.4.1.1795.2.24.2.16.1.2.8.1 no-access
An entry contains the objects for the traceroute test.
                 applTracerouteResultTestId 1.3.6.1.4.1.1795.2.24.2.16.1.2.8.1.1 integer read-only
A unique ID to identify each application test.
                 applTracerouteHopCount 1.3.6.1.4.1.1795.2.24.2.16.1.2.8.1.2 integer read-only
This object contains the number of hops to reach the gateway.
                 applTracerouteIpAddr 1.3.6.1.4.1.1795.2.24.2.16.1.2.8.1.3 ipaddress read-only
This object contains the IP address of the gateway.
                 applTraceroutePktSize 1.3.6.1.4.1.1795.2.24.2.16.1.2.8.1.4 integer read-only
This object corresponds to the size of the packet (in bytes) which will be sent during the traceroute test. The default value for this object is 38 bytes
                 applTracerouteProbe1RTT 1.3.6.1.4.1.1795.2.24.2.16.1.2.8.1.5 integer read-only
This object contains the round trip time (rtt) of the first probe sent to the gateway. If the probe has a timeout the rtt is set to -1.
                 applTracerouteProbe2RTT 1.3.6.1.4.1.1795.2.24.2.16.1.2.8.1.6 integer read-only
This object contains the round trip time (rtt) of the second probe sent to the gateway. If the probe has a timeout the rtt is set to -1.
                 applTracerouteProbe3RTT 1.3.6.1.4.1.1795.2.24.2.16.1.2.8.1.7 integer read-only
This object contains the round trip time (rtt) of the third probe sent to the gateway. If the probe has a timeout the rtt is set to -1.
     diagTest 1.3.6.1.4.1.1795.2.24.2.16.1.3
         diagTestTrapEnable 1.3.6.1.4.1.1795.2.24.2.16.1.3.1 integer read-write
This object is used to disable or enable TestOver and TestStart trap for all tests. It is bit sum and possible bit positions are 1 TestStart trap 2 TestOver trap
 diagTestMIBTraps 1.3.6.1.4.1.1795.2.24.2.16.2
       diagApplTestStart 1.3.6.1.4.1.1795.2.24.2.16.20.1
This trap signifies that an application test has been initiated.
       diagIfTestStart 1.3.6.1.4.1.1795.2.24.2.16.20.2
This trap signifies that a diagnostic test has been initiated.
       diagApplTestStop 1.3.6.1.4.1.1795.2.24.2.16.20.101
This trap signifies that an application test has completed. This trap compliments the diagApplTestStart trap.
       diagIfTestOver 1.3.6.1.4.1.1795.2.24.2.16.20.102
This trap signifies that a diagnostic test has completed. This trap compliments the diagIfTestStart trap