PDN-ATMM4EXT-MIB: View SNMP OID List / Download MIB

VENDOR: PARADYNE


 Home MIB: PDN-ATMM4EXT-MIB
Download as:   
SNMPv2-CONF, ATM-FORUM-SNMP-M4-MIB, IF-MIB, SNMPv2-SMI, PDN-HEADER-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 pdnAtmfM4ExtMIB 1.3.6.1.4.1.1795.2.24.2.6.11.6
This MIB Module extends the ATM-FORUM-SNMP-M4-MI defined in the Atm Forums M4 Mib
     pdnAtmfM4ExtObjects 1.3.6.1.4.1.1795.2.24.2.6.11.6.1
         pdnAtmfM4TcProtoCurrExtTable 1.3.6.1.4.1.1795.2.24.2.6.11.6.1.1 no-access
The Paradyne Extension to the atmfM4TcProtoCurrTable of the ATM-FORUM-SNMP-M4-MIB.
             pdnAtmfM4TcProtoCurrExtEntry 1.3.6.1.4.1.1795.2.24.2.6.11.6.1.1.1 no-access
The Paradyne Extension to the atmfM4TcProtoCurrTable of the ATM-FORUM-SNMP-M4-MIB.
                 pdnAtmfM4TcProtoCurrCellIns 1.3.6.1.4.1.1795.2.24.2.6.11.6.1.1.1.1 gauge32 read-only
The number of ATM cells received on this interface since the start of this interval
                 pdnAtmfM4TcProtoCurrCellOuts 1.3.6.1.4.1.1795.2.24.2.6.11.6.1.1.1.2 gauge32 read-only
The number of ATM cells sent on this interface since the start of this interval
                 pdnAtmfM4TcProtoCurrInDiscards 1.3.6.1.4.1.1795.2.24.2.6.11.6.1.1.1.3 gauge32 read-only
The number of RX ATM cells dropped on this interface since the start of this interval
                 pdnAtmfM4TcProtoCurrOutDiscards 1.3.6.1.4.1.1795.2.24.2.6.11.6.1.1.1.4 gauge32 read-only
The number of TX ATM cells dropped on this interface since the start of this interval
                 pdnAtmfM4TcProtoCurrLCDEvents 1.3.6.1.4.1.1795.2.24.2.6.11.6.1.1.1.5 gauge32 read-only
The number of Loss of Cell Delineation (LCD) event occurred on this interface since the start of this interval
                 pdnAtmfM4TcProtoCurrUnknownCells 1.3.6.1.4.1.1795.2.24.2.6.11.6.1.1.1.6 gauge32 read-only
The number of unknown Cells received on this interface since the start of this interval
                 pdnAtmfM4TcProtoCurrCorrectedHEC 1.3.6.1.4.1.1795.2.24.2.6.11.6.1.1.1.7 gauge32 read-only
The number of Cell with corrected HEC received on this interface since the start of this interval
         pdnAtmfM4TcProtoHistExtTable 1.3.6.1.4.1.1795.2.24.2.6.11.6.1.2 no-access
The Paradyne Extension to the atmfM4TcProtoHistTable of the ATM-FORUM-SNMP-M4-MIB.
             pdnAtmfM4TcProtoHistExtEntry 1.3.6.1.4.1.1795.2.24.2.6.11.6.1.2.1 no-access
The Paradyne Extension to the atmfM4TcProtoHistTable of the ATM-FORUM-SNMP-M4-MIB.
                 pdnAtmfM4TcProtoHistCellIns 1.3.6.1.4.1.1795.2.24.2.6.11.6.1.2.1.1 gauge32 read-only
The number of ATM cells received on this interface during this interval
                 pdnAtmfM4TcProtoHistCellOuts 1.3.6.1.4.1.1795.2.24.2.6.11.6.1.2.1.2 gauge32 read-only
The number of ATM cells sent on this interface during this interval
                 pdnAtmfM4TcProtoHistInDiscards 1.3.6.1.4.1.1795.2.24.2.6.11.6.1.2.1.3 gauge32 read-only
The number of RX ATM cells dropped on this interface during this interval
                 pdnAtmfM4TcProtoHistOutDiscards 1.3.6.1.4.1.1795.2.24.2.6.11.6.1.2.1.4 gauge32 read-only
The number of TX ATM cells dropped on this interface during this interval
                 pdnAtmfM4TcProtoHistLCDEvents 1.3.6.1.4.1.1795.2.24.2.6.11.6.1.2.1.5 gauge32 read-only
The number of Loss of Cell Delineation (LCD) event occurred on this interface during this interval
                 pdnAtmfM4TcProtoHistUnknownCells 1.3.6.1.4.1.1795.2.24.2.6.11.6.1.2.1.6 gauge32 read-only
The number of unknown Cells received on this interface since the start of this interval
                 pdnAtmfM4TcProtoHistCorrectedHEC 1.3.6.1.4.1.1795.2.24.2.6.11.6.1.2.1.7 gauge32 read-only
The number of Cell with corrected HEC received on this interface during this interval
         pdnAtmfM4TestTypes 1.3.6.1.4.1.1795.2.24.2.6.11.6.1.3
             pdnAtmfM4TestOAMLoopbackSegMultiCell 1.3.6.1.4.1.1795.2.24.2.6.11.6.1.3.1
This identifies an OAM Loopback Test on a VPL, VPC, VCL, or VCC termination point, using a segment OAM cell. The test type must have appended to it a code that uniquely identifies an intermediate point responsible for looping back the cell. If this is absent, the loopback is performed at the end of the segment or connection. E.g., the OID { pdnAtmfM4TestOAMLoopbackSegMultiCell 5 } identifies that the loopback should be performed at the intermediate point labeled 5.
             pdnAtmfM4TestOAMLoopbackE2EMultiCell 1.3.6.1.4.1.1795.2.24.2.6.11.6.1.3.2
This identifies an OAM Loopback Test on a VPL, VPC, VCL, or VCC termination point, using an end-to-end OAM cell.
         pdnAtmfM4VcLoopbackTestTable 1.3.6.1.4.1.1795.2.24.2.6.11.6.1.4 no-access
This table contains input and results for OAM loopback tests. There can be only one test running per ATM VCC This table should be used in conjunction with atmfM4VcTestTable with all the semantics of atmfM4VcTestTable.
             pdnAtmfM4VcLoopbackTestEntry 1.3.6.1.4.1.1795.2.24.2.6.11.6.1.4.1 no-access
An entry containing objects for test results for ATM OAM loopback test
                 pdnAtmfM4VcLoopbackTestElpsTime 1.3.6.1.4.1.1795.2.24.2.6.11.6.1.4.1.1 timeticks read-only
This object contains the time that has elapsed since the test started.
                 pdnAtmfM4VcLoopbackTestCellsSent 1.3.6.1.4.1.1795.2.24.2.6.11.6.1.4.1.2 gauge32 read-only
This object specifies a count of the number of test cells that have been sent. The value of this object stops increasing when it reaches its maximum value.
                 pdnAtmfM4VcLoopbackTestCellsRcvd 1.3.6.1.4.1.1795.2.24.2.6.11.6.1.4.1.3 gauge32 read-only
This object specifies a count of the number of test cells that have been received. The value of this object stops increasing when it reaches its maximum value.
                 pdnAtmfM4VcLoopbackTestMinRTDelay 1.3.6.1.4.1.1795.2.24.2.6.11.6.1.4.1.4 gauge32 read-only
This object contains the value of the shortest round trip delay since the test has been started. It is calculated only on the cells that have been received. Cells that were dropped are not counted.
                 pdnAtmfM4VcLoopbackTestMaxRTDelay 1.3.6.1.4.1.1795.2.24.2.6.11.6.1.4.1.5 gauge32 read-only
This object contains the value of the longest round trip delay since the test has been started. It is calculated only on the cells that have been received. Cells that were dropped are not counted.
                 pdnAtmfM4VcLoopbackTestAvgRTDelay 1.3.6.1.4.1.1795.2.24.2.6.11.6.1.4.1.6 gauge32 read-only
This object contains the value of the average round trip delay since the test has been started. It is calculated only on the cells that have been received. Cells that were dropped are not counted.
                 pdnAtmfM4VcLoopbackTestErrorCode 1.3.6.1.4.1.1795.2.24.2.6.11.6.1.4.1.7 pdnatmfm4testerrorcode read-only
This object contains the specific error code on the test result.
         pdnAtmfM4Vc1CellLoopTable 1.3.6.1.4.1.1795.2.24.2.6.11.6.1.5 no-access
This table contains input and results for single cell OAM loopback tests. There can be only one test running per ATM VCC This table should be used in conjunction with atmfM4VcTestTable with all the semantics of atmfM4VcTestTable.
             pdnAtmfM4Vc1CellLoopEntry 1.3.6.1.4.1.1795.2.24.2.6.11.6.1.5.1 no-access
An entry containing objects for test results for a single cell ATM OAM loopback test
                 pdnAtmfM4Vc1CellLoopRTDelay 1.3.6.1.4.1.1795.2.24.2.6.11.6.1.5.1.1 gauge32 read-only
This object contains the value of the round trip delay of the the test cell. A value of zero indicates that no cell has been received.
                 pdnAtmfM4Vc1CellLoopReportedLocation 1.3.6.1.4.1.1795.2.24.2.6.11.6.1.5.1.2 octet string read-only
This object contains the value of the location identifier reported by the received cell.
                 pdnAtmfM4Vc1CellLoopErrorCode 1.3.6.1.4.1.1795.2.24.2.6.11.6.1.5.1.3 pdnatmfm4testerrorcode read-only
This object contains the specific error code on the test result.
         pdnAtmfM4LoopbackLocationTable 1.3.6.1.4.1.1795.2.24.2.6.11.6.1.6 no-access
This table contains the ATM OAM loopback location codes for ATM cell layer interfaces.
             pdnAtmfM4LoopbackLocationEntry 1.3.6.1.4.1.1795.2.24.2.6.11.6.1.6.1 no-access
An entry containing objects for ATM OAM loopback locations.
                 pdnAtmfM4LoopbackLocationCode 1.3.6.1.4.1.1795.2.24.2.6.11.6.1.6.1.1 octet string read-write
This object contains the value of ATM OAM Loopback Location Code
         pdnAtmfM4VpLoopbackTestTable 1.3.6.1.4.1.1795.2.24.2.6.11.6.1.7 no-access
This table contains input and results for OAM loopback tests. There can be only one test running per ATM VPC This table should be used in conjunction with atmfM4VpTestTable with all the semantics of atmfM4VpTestTable.
             pdnAtmfM4VpLoopbackTestEntry 1.3.6.1.4.1.1795.2.24.2.6.11.6.1.7.1 no-access
An entry containing objects for test results for ATM OAM loopback test
                 pdnAtmfM4VpLoopbackTestElpsTime 1.3.6.1.4.1.1795.2.24.2.6.11.6.1.7.1.1 timeticks read-only
This object contains the time that has elapsed since the test started.
                 pdnAtmfM4VpLoopbackTestCellsSent 1.3.6.1.4.1.1795.2.24.2.6.11.6.1.7.1.2 gauge32 read-only
This object specifies a count of the number of test cells that have been sent. The value of this object stops increasing when it reaches its maximum value.
                 pdnAtmfM4VpLoopbackTestCellsRcvd 1.3.6.1.4.1.1795.2.24.2.6.11.6.1.7.1.3 gauge32 read-only
This object specifies a count of the number of test cells that have been received. The value of this object stops increasing when it reaches its maximum value.
                 pdnAtmfM4VpLoopbackTestMinRTDelay 1.3.6.1.4.1.1795.2.24.2.6.11.6.1.7.1.4 gauge32 read-only
This object contains the value of the shortest round trip delay since the test has been started. It is calculated only on the cells that have been received. Cells that were dropped are not counted.
                 pdnAtmfM4VpLoopbackTestMaxRTDelay 1.3.6.1.4.1.1795.2.24.2.6.11.6.1.7.1.5 gauge32 read-only
This object contains the value of the longest round trip delay since the test has been started. It is calculated only on the cells that have been received. Cells that were dropped are not counted.
                 pdnAtmfM4VpLoopbackTestAvgRTDelay 1.3.6.1.4.1.1795.2.24.2.6.11.6.1.7.1.6 gauge32 read-only
This object contains the value of the average round trip delay since the test has been started. It is calculated only on the cells that have been received. Cells that were dropped are not counted.
                 pdnAtmfM4VpLoopbackTestErrorCode 1.3.6.1.4.1.1795.2.24.2.6.11.6.1.7.1.7 pdnatmfm4testerrorcode read-only
This object contains the specific error code on the test result.
     pdnAtmfM4ExtTraps 1.3.6.1.4.1.1795.2.24.2.6.11.6.2
         pdnAtmfM4ExtTrapPrefix 1.3.6.1.4.1.1795.2.24.2.6.11.6.2.0
     pdnAtmfM4ExtConformance 1.3.6.1.4.1.1795.2.24.2.6.11.6.3
         pdnAtmfM4Groups 1.3.6.1.4.1.1795.2.24.2.6.11.6.3.1
             pdnAtmfM4TcCurrGroup 1.3.6.1.4.1.1795.2.24.2.6.11.6.3.1.1
The objects in the ATM TC layer current table.
             pdnAtmfM4TcHistGroup 1.3.6.1.4.1.1795.2.24.2.6.11.6.3.1.2
The objects in the ATM TC layer history table.
             pdnAtmfM4VcLoopbackTestGroup 1.3.6.1.4.1.1795.2.24.2.6.11.6.3.1.3
The objects in the ATM OAM Loopback Test (multiple cell) table for ATM VCC.
             pdnAtmfM4Vc1CellLoopGroup 1.3.6.1.4.1.1795.2.24.2.6.11.6.3.1.4
The objects in the ATM Single Cell OAM Loopback Test table.
             pdnAtmfM4LoopbackLocationGroup 1.3.6.1.4.1.1795.2.24.2.6.11.6.3.1.5
The objects in the ATM Loopback Location table.
             pdnAtmfM4VpLoopbackTestGroup 1.3.6.1.4.1.1795.2.24.2.6.11.6.3.1.6
The objects in the ATM OAM Loopback Test (multiple cell) table for ATM VPC.
         pdnAtmfM4Compliances 1.3.6.1.4.1.1795.2.24.2.6.11.6.3.2
             pdnAtmfM4Compliance 1.3.6.1.4.1.1795.2.24.2.6.11.6.3.2.1
The compliance statement for SNMP entities which support the ATM M4 extensions.