PDN-ATMEXT-MIB: View SNMP OID List / Download MIB

VENDOR: PARADYNE


 Home MIB: PDN-ATMEXT-MIB
Download as:   
SNMPv2-CONF, IF-MIB, SNMPv2-SMI, PDN-HEADER-MIB, ATM-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 pdnAtmExtMIB 1.3.6.1.4.1.1795.2.24.2.6.11.5
This MIB Module extends the ATM-MIB defined in rfc2515
     pdnAtmExtMIBObjects 1.3.6.1.4.1.1795.2.24.2.6.11.5.1
         pdnAtmIfConfExtTable 1.3.6.1.4.1.1795.2.24.2.6.11.5.1.1 no-access
The Paradyne Extension to the atmInterfaceConfTable of the ATM-MIB.
             pdnAtmIfConfExtEntry 1.3.6.1.4.1.1795.2.24.2.6.11.5.1.1.1 no-access
An entry in the Paradyne Extension to the atmInterfaceConfTable of the ATM-MIB.
                 pdnAtmIfConfExtVbrRtBandwidthUtil 1.3.6.1.4.1.1795.2.24.2.6.11.5.1.1.1.1 integer32 read-write
The bandwidth utilization for realtime vbr type traffic expressed as a percentage.
                 pdnAtmIfConfExtVbrNrtBandwidthUtil 1.3.6.1.4.1.1795.2.24.2.6.11.5.1.1.1.2 integer32 read-write
The bandwidth utilization for non-realtime VBR type traffic expressed as a percentage.
                 pdnAtmIfConfExtHecErrorThreshold 1.3.6.1.4.1.1795.2.24.2.6.11.5.1.1.1.3 integer32 read-write
The value of this object represents the threshold value for the number of uncrorrectable HEC errors in a 15 minutes interval. An SNMP link Up/Down trap would be generated if the number of uncorrectable HEC errors in a 15 minutes interval exceeds this threshold. The valid range of this object is 0 to 1000. A value of 0 will cause a trap to be sent on each occurrence of a HEC error. A value of -9999 disables the threshold check. The default value for this object is 100.
                 pdnAtmIfConfExtUnknownCellThreshold 1.3.6.1.4.1.1795.2.24.2.6.11.5.1.1.1.4 integer32 read-write
The value of this object represents the threshold value for the number of unknown cells in a 15 minutes interval. An SNMP trap would be generated if the number of unknown cell in a 15 minutes interval exceeds this threshold. The valid range of this object is 0 to 1000. A value of 0 will cause a trap to be sent on each occurrence of an unknown cell. A value of -9999 disables the threshold check. The default value for this object is 10
                 pdnAtmIfConfExtOcdEventThreshold 1.3.6.1.4.1.1795.2.24.2.6.11.5.1.1.1.5 integer32 read-write
The value of this object represents the threshold value for the number of Out of Cell Delineation(OCD) events in a 15 minutes interval. An SNMP trap would be generated if the number of OCD events in a 15 minutes interval exceeds this threshold. The valid range of this object is 0 to 1000. A value of 0 will cause a trap to be sent on each occurrence of a HEC error. A value of -9999 disables the threshold check. The default value for this object is 0
                 pdnAtmIfConfExtBandwidthUtilCbrReserved 1.3.6.1.4.1.1795.2.24.2.6.11.5.1.1.1.6 integer32 read-write
This object specifies the percent of the interface bandwidth to be allocated to the CBR traffic class.
                 pdnAtmIfConfExtBandwidthUtilCbrAssigned 1.3.6.1.4.1.1795.2.24.2.6.11.5.1.1.1.7 integer32 read-only
This object specifies the percent of bandwidth utilization (sometimes reffered to as over subscription) the connection Addmission Control algorithm has already allowed for the CBR class of service.
                 pdnAtmIfConfExtBandwidthUtilVbrRtReserved 1.3.6.1.4.1.1795.2.24.2.6.11.5.1.1.1.8 integer32 read-write
This object specifies the percent of the interface bandwidth to be allocated to the VBR-rt traffic class.
                 pdnAtmIfConfExtBandwidthUtilVbrRtAssigned 1.3.6.1.4.1.1795.2.24.2.6.11.5.1.1.1.9 integer32 read-only
This object specifies the percent of bandwidth utilization (sometimes reffered to as over subscription) the connection Addmission Control algorithm has already allowed for the VBR-rt class of service.
                 pdnAtmIfConfExtBandwidthUtilVbrNrtReserved 1.3.6.1.4.1.1795.2.24.2.6.11.5.1.1.1.10 integer32 read-write
This object specifies the percent of the interface bandwidth to be allocated to the VBR-nrt traffic class.
                 pdnAtmIfConfExtBandwidthUtilVbrNrtAssigned 1.3.6.1.4.1.1795.2.24.2.6.11.5.1.1.1.11 integer32 read-only
This object specifies the percent of bandwidth utilization (sometimes reffered to as over subscription) the connection Addmission Control algorithm has already allowed for the VBR-nrt class of service.
                 pdnAtmIfConfExtBandwidthUtilUbrReserved 1.3.6.1.4.1.1795.2.24.2.6.11.5.1.1.1.12 integer32 read-write
This object specifies the percent of the interface bandwidth to be allocated to the UBR traffic class.
                 pdnAtmIfConfExtBandwidthUtilUbrAssigned 1.3.6.1.4.1.1795.2.24.2.6.11.5.1.1.1.13 integer32 read-only
This object specifies the percent of bandwidth utilization (sometimes reffered to as over subscription) the connection Addmission Control algorithm has already allowed for the UBR class of service.
                 pdnAtmIfConfExtRateShape 1.3.6.1.4.1.1795.2.24.2.6.11.5.1.1.1.14 integer32 read-write
This object is used to specify rate shaping on this interface. The valid range of this object is 512 to 46080 [512K..46Mbps] with increments of 64K. The default value will be set depending on the interface.
         pdnAtmTrafficDescrParamExtTable 1.3.6.1.4.1.1795.2.24.2.6.11.5.1.2 no-access
The Paradyne Extension to the atmTrafficDescrParamTable of the ATM-MIB.
             pdnAtmTrafficDescrParamExtEntry 1.3.6.1.4.1.1795.2.24.2.6.11.5.1.2.1 no-access
An entry in the Paradyne Extension to the atmTrafficDescrParamTable of the ATM-MIB.
                 pdnAtmTrafficDescrParamName 1.3.6.1.4.1.1795.2.24.2.6.11.5.1.2.1.1 displaystring read-only
The value of this Object identifies the traffic descriptor by a by a name.
                 pdnAtmTrafficPolicing 1.3.6.1.4.1.1795.2.24.2.6.11.5.1.2.1.2 truthvalue read-only
The value of this Object determines whether or not the vcl/vpl to which this traffic descriptor is bound will be policed
                 pdnAtmTrafficShaping 1.3.6.1.4.1.1795.2.24.2.6.11.5.1.2.1.3 truthvalue read-only
The value of this Object determines whether or not the vcl/vpl to which this traffic descriptor is bound will be rate shaped to the specified traffic contract
         pdnAal5VccExtTable 1.3.6.1.4.1.1795.2.24.2.6.11.5.1.3 no-access
The Paradyne Extension to the aal5VccTable in the ATM-MIB.
             pdnAal5VccExtEntry 1.3.6.1.4.1.1795.2.24.2.6.11.5.1.3.1 no-access
An entry in the Paradyne Extension to the aal5VccTable. in the ATM-MIB.
                 pdnAal5VccExtOutPDUs 1.3.6.1.4.1.1795.2.24.2.6.11.5.1.3.1.1 unsigned32 read-only
The total number of AAL5 CPCS PDUs transmitted on the interface associated with an AAL5 entry.
                 pdnAal5VccExtInPDUs 1.3.6.1.4.1.1795.2.24.2.6.11.5.1.3.1.2 unsigned32 read-only
This total number of AAL5 CPCS PDUs transmitted on the interface associated with an AAL5 entry.
     pdnAtmExtMIBTraps 1.3.6.1.4.1.1795.2.24.2.6.11.5.2
         pdnAtmExtMIBTrapPrefix 1.3.6.1.4.1.1795.2.24.2.6.11.5.2.0
             pdnAtmIfConfExtExcessInvalidCellsAlarm 1.3.6.1.4.1.1795.2.24.2.6.11.5.2.0.1
This alarm indicates that the number of cells with uncorrectable HEC erros has exceeded the used defined the threshold.
             pdnAtmIfConfExtEgressLineRateAlarmSet 1.3.6.1.4.1.1795.2.24.2.6.11.5.2.0.2
This alarm indicates that the line rate of the specified interface has dropped below a value which violates the traffic contracts of the admitted connections in the egress (transmit) direction
             pdnAtmIfConfExtVplNoBandwidthAvail 1.3.6.1.4.1.1795.2.24.2.6.11.5.2.0.3
This alarm indicates that the traffic contract(s) associated with the Virtual Path (VP) Cross Connect cannot be satisfied by the ATM switch. It is left upto the implementation to decide whether or not the VP cross connect will be admitted
             pdnAtmIfConfExtVclNoBandwidthAvail 1.3.6.1.4.1.1795.2.24.2.6.11.5.2.0.4
This alarm indicates that the traffic contract(s) associated with the Virtual Channel (VC) Cross Connect cannot be satisfied by the ATM switch. It is left upto the implementation to decide whether or not the VC cross connect will be admitted
             pdnAtmIfConfExtIngressLineRateAlarmSet 1.3.6.1.4.1.1795.2.24.2.6.11.5.2.0.5
This alarm indicates that the line rate of the specified interface has dropped below a value which violates the traffic contracts of the admitted connections in the ingress (receive) direction
             pdnAtmIfConfExtEgressLineRateAlarmClear 1.3.6.1.4.1.1795.2.24.2.6.11.5.2.0.102
This alarm indicates that the line rate of the specified interface has risen above a value which would no longer violate the traffic contracts of the admitted connections in the egress (transmit) direction
             pdnAtmIfConfExtIngressLineRateAlarmClear 1.3.6.1.4.1.1795.2.24.2.6.11.5.2.0.105
This alarm indicates that the line rate of the specified interface has risen above a value which would no longer violate the traffic contracts of the admitted connections in the ingress (receive) direction
     pdnAtmExtMIBConformance 1.3.6.1.4.1.1795.2.24.2.6.11.5.3
         pdnAtmExtMibCompliances 1.3.6.1.4.1.1795.2.24.2.6.11.5.3.1
         pdnAtmExtMibGroups 1.3.6.1.4.1.1795.2.24.2.6.11.5.3.2
             pdnAtmIfConfExtGroup 1.3.6.1.4.1.1795.2.24.2.6.11.5.3.2.1
Objects grouped for the pdnAtmIfConfExtTable.
             pdnAtmTrafficDescrParamExtGroup 1.3.6.1.4.1.1795.2.24.2.6.11.5.3.2.2
Objects grouped for the pdnAtmTrafficDescrParamExtTable.
             pdnAal5VccExtGroup 1.3.6.1.4.1.1795.2.24.2.6.11.5.3.2.3
Objects grouped for the pdnAal5VccExtTable.
             pdnAtmExtNotificationGroup 1.3.6.1.4.1.1795.2.24.2.6.11.5.3.2.4
Objects grouped for Notification defined in this MIB.
     pdnAtmExtMIBTrafficDescriptorTypes 1.3.6.1.4.1.1795.2.24.2.6.11.5.4
         pdnAtmNoClpTaggingNoScrCdvtMdcr 1.3.6.1.4.1.1795.2.24.2.6.11.5.4.1
This Traffic Descriptor type is for no CLP with tagging and no Sustained Cell Rate. The Use of the Parameter Vector for this type: Parameter 1: Peak Cell Rate in cells/second CLP=0+1 traffic Parameter 2: CDVT in tenths of a microsecond Parameter 3: Minimum Desired Cell Rate in cells/second (<= PCR) Parameter 4: Tolerance To the MDCR Commitment (>= 1/MDCR) in milliseconds Parameter 5: not used This Traffic Descriptor type is applicable to connections following the UBR.2 conformance definition
         pdnAtmNoClpNoScrCdvtMdcr 1.3.6.1.4.1.1795.2.24.2.6.11.5.4.2
This Traffic Descriptor type is for no CLP and no Sustained Cell Rate. The Use of the Parameter Vector for this type: Parameter 1: Peak Cell Rate in cells/second CLP=0+1 traffic Parameter 2: CDVT in tenths of a microsecond Parameter 3: Minimum Desired Cell Rate in cells/second (<= PCR) Parameter 4: Tolerance To the MDCR Commitment (>= 1/MDCR) in milliseconds Parameter 5: not used This Traffic Descriptor type is applicable to connections following the UBR.1 conformance definition