PCUBE-SE-MIB: View SNMP OID List / Download MIB

VENDOR: P-CUBE LTD.


 Home MIB: PCUBE-SE-MIB
Download as:   
SNMPv2-CONF, PCUBE-SMI, SNMP-FRAMEWORK-MIB, SNMPv2-SMI, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 pcubeSeMIB 1.3.6.1.4.1.5655.2.3
Main SNMP MIB for Cisco's SCE OS products such as SCE2000 and SE100. This MIB provides configuration and runtime status for chassis, control modules, and line modules on the SCOS systems.
     pcubeSeConformance 1.3.6.1.4.1.5655.2.3.1
         pcubeSeGroups 1.3.6.1.4.1.5655.2.3.1.1
             pcubeSystemGroup 1.3.6.1.4.1.5655.2.3.1.1.1
System related inforamation.
             pcubeChassisGroup 1.3.6.1.4.1.5655.2.3.1.1.2
Chassis related information.
             pcuebModuleGroup 1.3.6.1.4.1.5655.2.3.1.1.3
Module related information.
             pcubeLinkGroup 1.3.6.1.4.1.5655.2.3.1.1.4
Link related information.
             pcubeDiskGroup 1.3.6.1.4.1.5655.2.3.1.1.5
Disk related information.
             pcubeRdrFormatterGroup 1.3.6.1.4.1.5655.2.3.1.1.6
RDR-Formatter related information.
             pcubeLoggerGroup 1.3.6.1.4.1.5655.2.3.1.1.7
Logger related information.
             pcubeSubscribersGroup 1.3.6.1.4.1.5655.2.3.1.1.8
Subscriber related information.
             pcubeTrafficProcessorGroup 1.3.6.1.4.1.5655.2.3.1.1.9
Traffic processors related information.
             pcubePortGroup 1.3.6.1.4.1.5655.2.3.1.1.10
Ports related information.
             pcubeTxQueuesGroup 1.3.6.1.4.1.5655.2.3.1.1.11
Tx queue related information
             pcubeGlobalControllersGroup 1.3.6.1.4.1.5655.2.3.1.1.12
Global controllers related information.
             pcubeApplicationGroup 1.3.6.1.4.1.5655.2.3.1.1.13
Application related information.
             pcubeTrafficCountersGroup 1.3.6.1.4.1.5655.2.3.1.1.14
Traffic counter related information.
             pcubeAttackGroup 1.3.6.1.4.1.5655.2.3.1.1.15
Attacks related information.
             pcubeVasTrafficForwardingGroup 1.3.6.1.4.1.5655.2.3.1.1.16
VAS traffic forwarding related information.
             pcubeMplsVpnAutoLearnGroup 1.3.6.1.4.1.5655.2.3.1.1.17
MPLS VPN auto learning related information.
             pcubeTrapObjectsGroup 1.3.6.1.4.1.5655.2.3.1.1.18
Notifications' objects group.
         pcubeSeCompliances 1.3.6.1.4.1.5655.2.3.1.2
             pcubeCompliance 1.3.6.1.4.1.5655.2.3.1.2.1
A compliance statement defined in this MIB module, for SCE SNMP agents. with old deprectated groups. This compliance includes deprecated groups.
             pcubeComplianceRev1 1.3.6.1.4.1.5655.2.3.1.2.2
A compliance statement defined in this MIB module, for SCE SNMP agents.
         pcubeSeEventsGroup 1.3.6.1.4.1.5655.2.3.1.3
Pcube notifications. Contains deprecated objects.
         pcubeSeEventsGroupRev1 1.3.6.1.4.1.5655.2.3.1.4
Pcube notifications.
 pcubeSeEvents 1.3.6.1.4.1.5655.4.0
     operationalStatusOperationalTrap 1.3.6.1.4.1.5655.4.0.1
OperationalStatusOperational notification signifies that the agent entity has detected the sysOperationalStatus object in this MIB has changed to 'operational(3)'.
     operationalStatusWarningTrap 1.3.6.1.4.1.5655.4.0.2
OperationalStatusWarning notification signifies that the agent entity has detected the sysOperationalStatus object in this MIB has changed to 'warning(4)'.
     operationalStatusFailureTrap 1.3.6.1.4.1.5655.4.0.3
OperationalStatusFailure notification signifies that the agent entity has detected the sysOperationalStatus object in this MIB has changed to 'failure(5)'.
     systemResetTrap 1.3.6.1.4.1.5655.4.0.4
A systemReset notification signifies that the agent entity is about to reset itself either per user's request or due to a fatal event.
     chassisTempAlarmOnTrap 1.3.6.1.4.1.5655.4.0.5
A chassisTempAlarmOn notification signifies that the agent entity has detected the chassisTempAlarm object in this MIB has changed to the 'on(3)' state (temperature is too high).
     chassisTempAlarmOffTrap 1.3.6.1.4.1.5655.4.0.6
A chassisTempAlarmOff notification signifies that the agent entity has detected the chassisTempAlarm object in this MIB has changed to the 'off(2)' state (temperature level is back to normal).
     chassisVoltageAlarmOnTrap 1.3.6.1.4.1.5655.4.0.7
A chassisVoltageAlarmOn notification signifies that the agent entity has detected the chassisVoltageAlarm object in this MIB has changed to the 'on(3)' state (voltage level is too high).
     chassisFansAlarmOnTrap 1.3.6.1.4.1.5655.4.0.8
A chassisFanStatusFailure notification signifies that the agent entity has detected the chassisFansAlarm object in this MIB has changed to the 'on(3)' state.
     chassisPowerSupplyAlarmOnTrap 1.3.6.1.4.1.5655.4.0.9
A chassisPsuStatusFailure notification signifies that the agent entity has detected the chassisPowerSupplyAlarm object in this MIB has changed to the 'on(3)' state.
     rdrActiveConnectionTrap 1.3.6.1.4.1.5655.4.0.10
RdrConnectionDestTypeActive notification signifies that the agent entity has detected the rdrFormatterDestStatus object in this MIB has changed to the 'active(2)' state.
     rdrNoActiveConnectionTrap 1.3.6.1.4.1.5655.4.0.11
A rdrNoActiveConnection notification signifies that the agent entity has detected there is no active connection between the RDR-formatter and any Data Collector.
     rdrConnectionUpTrap 1.3.6.1.4.1.5655.4.0.12
RdrConnectionStatusUp notification signifies that the agent entity has detected the rdrFormatterDestConnectionStatus object in this MIB has changed to 'up(2)'.
     rdrConnectionDownTrap 1.3.6.1.4.1.5655.4.0.13
RdrConnectionStatusDown notification signifies that the agent entity has detected the rdrFormatterDestConnectionStatus object in this MIB has changed to 'down(3)'.
     telnetSessionStartedTrap 1.3.6.1.4.1.5655.4.0.14
Replaced by the more generic sessionStartedTrap.
     telnetSessionEndedTrap 1.3.6.1.4.1.5655.4.0.15
Replaced by the more generic sessionEndedTrap.
     telnetSessionDeniedAccessTrap 1.3.6.1.4.1.5655.4.0.16
Replaced by the more generic sessionDeniedAccessTrap.
     telnetSessionBadLoginTrap 1.3.6.1.4.1.5655.4.0.17
Replaced by the more generic sessionBadLoginTrap.
     loggerUserLogIsFullTrap 1.3.6.1.4.1.5655.4.0.18
A loggerUserLogIsFull notification signifies that the agent entity has detected the User log file is full. In such case the agent entity rolls to the next file.
     sntpClockDriftWarnTrap 1.3.6.1.4.1.5655.4.0.19
An sntpClockDriftWarn notification signifies that the entity's SNTP agent did not receive time update for a long period, this may cause a time drift.
     linkModeBypassTrap 1.3.6.1.4.1.5655.4.0.20
A linkModeBypass notification signifies that the agent entity has detected that the linkOperMode object in this MIB has changed to 'bypass(2)'.
     linkModeForwardingTrap 1.3.6.1.4.1.5655.4.0.21
A linkModeForwarding notification signifies that the agent entity has detected that the linkOperMode object in this MIB has changed to 'forwarding(3)'.
     linkModeCutoffTrap 1.3.6.1.4.1.5655.4.0.22
A linkModeCutoff notification signifies that the agent entity has detected that the linkOperMode object in this MIB has changed to 'cutoff(4)'.
     pcubeSeEventGenericString1 1.3.6.1.4.1.5655.4.0.23 snmpadminstring read-only
Temporary string used for traps. Always returns an empty string.
     pcubeSeEventGenericString2 1.3.6.1.4.1.5655.4.0.24 snmpadminstring read-only
Temporary string used for traps. Always returns an empty string.
     moduleAttackFilterActivatedTrap 1.3.6.1.4.1.5655.4.0.25
A moduleAttackFilterActivated notification signifies that the agent entity's attack filter module has activated a filter. The pcubeSeEventGenericString1 is the type of attack-filter, which was activated.
     moduleAttackFilterDeactivatedTrap 1.3.6.1.4.1.5655.4.0.26
A portAttackFilterDeactivated notification signifies that the agent entity's attack filter module has removed a filter that was previously activated. The pcubeSeEventGenericString1 is the attack-filter type, which was sent in the corresponding moduleAttackFilterActivatedTrap. the pcubeSeEventGenericString2 is the reason for deactivating the filter.
     moduleEmAgentGenericTrap 1.3.6.1.4.1.5655.4.0.27
A generic notification used by the P-Cube EM agent. pcubeSeEventGenericString1 specifies what notification is it, and pcubeSeEventGenericString2 is the relevant parameter.
     linkModeSniffingTrap 1.3.6.1.4.1.5655.4.0.28
A linkModeSniffing notification signifies that the agent entity has detected that the linkOperMode object in this MIB has changed to 'sniffing(5)'.
     moduleRedundancyReadyTrap 1.3.6.1.4.1.5655.4.0.29
A moduleRedundancyReady notification signifies that the module was able to connect and synchronize with a redundant entity, and is now ready to handle fail-over if needed.
     moduleRedundantConfigurationMismatchTrap 1.3.6.1.4.1.5655.4.0.30
A moduleRedundantConfigurationMismatch notification signifies that the module was not able to synchronize with a redundant entity, due to a essential configuration parameters that are do not match between the module and the redundant entity.
     moduleLostRedundancyTrap 1.3.6.1.4.1.5655.4.0.31
A moduleLostRedundancy notification signifies that the module has lost the ability to perform the fail-over procedure.
     moduleSmConnectionDownTrap 1.3.6.1.4.1.5655.4.0.32
A moduleSmConnectionDown notification signifies that the module's virtual connection to the subscriber manager is broken.
     moduleSmConnectionUpTrap 1.3.6.1.4.1.5655.4.0.33
A moduleSmConnectionUp notification signifies that the module's virtual connection to the subscriber manager is up and working.
     moduleOperStatusChangeTrap 1.3.6.1.4.1.5655.4.0.34
A moduleOperStatusChangeTrap notification signifies that the moduleOperStatus has changed its value.
     portOperStatusChangeTrap 1.3.6.1.4.1.5655.4.0.35
A portOperStatusChangeTrap notification signifies that the portOperStatus object of the portIndex has changed its value, i.e., the link was forced down or the force down was released.
     chassisLineFeedAlarmOnTrap 1.3.6.1.4.1.5655.4.0.36
A chassisLineFeedAlarmOn notification signifies that the agent entity has detected the chassisLineFeed object in this MIB has changed to the 'on(3)' state.
     rdrFormatterCategoryDiscardingReportsTrap 1.3.6.1.4.1.5655.4.0.37
rdrCategoryDiscardingReportsTrap notification signifies that the agent entity has detected that reports send to this category are being discarded. The rdrFormatterCategoryNumReportsDiscarded object in this MIB is counting the amount of discarded reports.
     rdrFormatterCategoryStoppedDiscardingReportsTrap 1.3.6.1.4.1.5655.4.0.38
rdrCategoryStoppedDiscardingReportsTrap notification signifies that the agent entity has detected that reports send to this category are not being discarded any more. The rdrFormatterCategoryNumReportsDiscarded object in this MIB is counting the amount of discarded reports.
     sessionStartedTrap 1.3.6.1.4.1.5655.4.0.39
A sessionStarted notification signifies that the agent entity has accepted a new session. The pcubeSeEventGenericString1 is the session type (telnet/SSH) and client IP address.
     sessionEndedTrap 1.3.6.1.4.1.5655.4.0.40
A sessionEnded notification signifies that the agent entity has detected end of a session. The pcubeSeEventGenericString1 is the session type (telnet/SSH) and client IP address.
     sessionDeniedAccessTrap 1.3.6.1.4.1.5655.4.0.41
A sessionDeniedAccess notification signifies that the agent entity has refused a session from unauthorized source. The pcubeSeEventGenericString1 is the session type (telnet/SSH) and client IP address.
     sessionBadLoginTrap 1.3.6.1.4.1.5655.4.0.42
A sessionBadLogin notification signifies that the agent entity has detected attempt to login with a wrong password. The pcubeSeEventGenericString1 is the session type (telnet/SSH) and client IP address.
     illegalSubscriberMappingTrap 1.3.6.1.4.1.5655.4.0.43
A illegalSubscriberMappingTrap notification signifies that some external entity has attempted to create illegal or inconsistent subscriber mappings. The pcubeSeEventGenericString1 contains a message describing the problem.
     loggerLineAttackLogFullTrap 1.3.6.1.4.1.5655.4.0.44
Signifies that the agent entity has detected the line-attack log file is full. In such case the agent entity rolls to the next file.
     vasServerOpertionalStatusChangeTrap 1.3.6.1.4.1.5655.4.0.45
Signifies that the agent entity has detected that the vas server operational status has changed.
     pullRequestNumber 1.3.6.1.4.1.5655.4.0.46 integer32 read-only
Used only for traps to signify the number of pull requests issued so far for the anonymous subscriber given in the pullRequestRetryFailedTrap containing notification. A direct get will always returns 0.
     pullRequestRetryFailedTrap 1.3.6.1.4.1.5655.4.0.47
Signifies that an unknown subscriber wasn't identified after a certain number of pull requests. The value of pcubeSeEventGenericString1 is the subscriber id and the pullRequestNumber is the number of pull requests made on this sub.
     mplsVpnTotalHWMappingsThresholdExceededTrap 1.3.6.1.4.1.5655.4.0.48
Sent when the value of mplsVpnCurrentHWMappings exceeds the allowed threshold.
 pcubeSEObjs 1.3.6.1.4.1.5655.4.1
     systemGrp 1.3.6.1.4.1.5655.4.1.1
         sysOperationalStatus 1.3.6.1.4.1.5655.4.1.1.1 integer read-only
Indicates the operational status of the system. Enumeration: 'failure': 5, 'warning': 4, 'other': 1, 'boot': 2, 'operational': 3.
         sysFailureRecovery 1.3.6.1.4.1.5655.4.1.1.2 integer read-only
Indicates if the system should enter a Failure mode after abnormal boot. Enumeration: 'nonOperational': 3, 'other': 1, 'operational': 2.
         sysVersion 1.3.6.1.4.1.5655.4.1.1.3 snmpadminstring read-only
The system version.
     pchassisGrp 1.3.6.1.4.1.5655.4.1.2
         pchassisSysType 1.3.6.1.4.1.5655.4.1.2.1 integer read-only
The chassis system type. Enumeration: 'se100': 3, 'other': 1, 'sce2000': 4, 'sce1000': 2.
         pchassisPowerSupplyAlarm 1.3.6.1.4.1.5655.4.1.2.2 integer read-only
Indicates if the power supply to the chassis is normal. If the status is not 'ok' it means that one or more power supplies are not functional. Enumeration: 'on': 3, 'other': 1, 'off': 2.
         pchassisFansAlarm 1.3.6.1.4.1.5655.4.1.2.3 integer read-only
Indicates if all the fans on the chassis are functional. Enumeration: 'on': 3, 'other': 1, 'off': 2.
         pchassisTempAlarm 1.3.6.1.4.1.5655.4.1.2.4 integer read-only
The chassis temperature alarm status. Enumeration: 'on': 3, 'other': 1, 'off': 2.
         pchassisVoltageAlarm 1.3.6.1.4.1.5655.4.1.2.5 integer read-only
The chassis internal voltage alarm status. If the alarm is 'on' it indicates that the voltage level of one or more HW units is not in the normal range. Enumeration: 'on': 3, 'other': 1, 'off': 2.
         pchassisNumSlots 1.3.6.1.4.1.5655.4.1.2.6 integer32 read-only
Indicates the number of slots in the chassis available for plug-in modules. This number counts slots that are already occupied as well as empty slots.
         pchassisSlotConfig 1.3.6.1.4.1.5655.4.1.2.7 integer32 read-only
An indication of which slots in the chassis have modules inserted. This is an integer value with bits set to indicate configured modules. It can be interpreted as a sum of f(x) as x goes from 1 to the number of slots, where f(x) = 0 for no module inserted and f(x) = exp(2, x-1) for a module inserted.
         pchassisPsuType 1.3.6.1.4.1.5655.4.1.2.8 integer read-only
Indicates the type of the power supplies. Enumeration: 'ac': 2, 'other': 1, 'dc': 3.
         pchassisLineFeedAlarm 1.3.6.1.4.1.5655.4.1.2.10 integer read-only
Indicates if the line feed to the chassis is normal. If the status is not 'ok' it means that one or more line feeds are not connected or have no power. Enumeration: 'on': 3, 'other': 1, 'off': 2.
     pmoduleGrp 1.3.6.1.4.1.5655.4.1.3
         pmoduleTable 1.3.6.1.4.1.5655.4.1.3.1 no-access
A list of module entries. The number of entries is the number of modules in the chassis.
             pmoduleEntry 1.3.6.1.4.1.5655.4.1.3.1.1 no-access
Entry containing information about one module in the chassis.
                 pmoduleIndex 1.3.6.1.4.1.5655.4.1.3.1.1.1 integer32 read-only
A unique value for each module within the chassis.
                 pmoduleType 1.3.6.1.4.1.5655.4.1.3.1.1.2 integer read-only
The type of module. Enumeration: 'fe2Module': 3, 'gbe4Module': 4, 'fe8Module': 7, 'gbe2Module': 2, 'oc124Module': 6, 'fe4Module': 5, 'other': 1.
                 pmoduleNumTrafficProcessors 1.3.6.1.4.1.5655.4.1.3.1.1.3 integer32 read-only
The number of traffic processors supported by this module.
                 pmoduleSlotNum 1.3.6.1.4.1.5655.4.1.3.1.1.4 integer32 read-only
This value is determined by the chassis slot number where this module is located. Valid entries are 1 to the value of chassisNumSlots.
                 pmoduleHwVersion 1.3.6.1.4.1.5655.4.1.3.1.1.5 snmpadminstring read-only
The hardware version of the module.
                 pmoduleNumPorts 1.3.6.1.4.1.5655.4.1.3.1.1.6 integer32 read-only
The number of ports supported by this module.
                 pmoduleNumLinks 1.3.6.1.4.1.5655.4.1.3.1.1.7 integer32 read-only
The number of links carrying inband traffic that are supported by this module. Link is uniquely defined by the two ports that are at its end-points.
                 pmoduleConnectionMode 1.3.6.1.4.1.5655.4.1.3.1.1.8 integer read-only
Indicates the connection mode of a module. Enumeration: 'inline': 2, 'inlineCascade': 4, 'other': 1, 'receiveOnly': 3, 'receiveOnlyCascade': 5.
                 pmoduleSerialNumber 1.3.6.1.4.1.5655.4.1.3.1.1.9 snmpadminstring read-only
Indicates the serial number of the module.
                 pmoduleUpStreamAttackFilteringTime 1.3.6.1.4.1.5655.4.1.3.1.1.10 timeticks read-only
Indicates the accumulated time which attack up-stream traffic was filtered.
                 pmoduleUpStreamLastAttackFilteringTime 1.3.6.1.4.1.5655.4.1.3.1.1.11 timeticks read-only
Indicates the time since the previous attack was filtered in the up-stream traffic.
                 pmoduleDownStreamAttackFilteringTime 1.3.6.1.4.1.5655.4.1.3.1.1.12 timeticks read-only
Indicates the accumulated time which attack down-stream traffic was filtered.
                 pmoduleDownStreamLastAttackFilteringTime 1.3.6.1.4.1.5655.4.1.3.1.1.13 timeticks read-only
Indicates the time since the previous attack was filtered in the down-stream traffic.
                 pmoduleAttackObjectsClearTime 1.3.6.1.4.1.5655.4.1.3.1.1.14 timeticks read-write
Indicates the time since the attack objects were cleared. Writing a 0 to this object causes the counters to be cleared.
                 pmoduleAdminStatus 1.3.6.1.4.1.5655.4.1.3.1.1.15 integer read-only
Indicates configuration of a module in respect to whether the module should handle traffic. Enumeration: 'other': 1, 'primary': 2, 'secondary': 3.
                 pmoduleOperStatus 1.3.6.1.4.1.5655.4.1.3.1.1.16 integer read-only
Indicates current module's role in respect to whether the module handles traffic. Enumeration: 'active': 2, 'standby': 3, 'other': 1.
     linkGrp 1.3.6.1.4.1.5655.4.1.4
         linkTable 1.3.6.1.4.1.5655.4.1.4.1 no-access
The Link table provides information regarding the configuration and status of the links that pass through the SE and carry inband traffic. The number of entries in this table is determined by the number of modules in the chassis and the number of links on each module.
             linkEntry 1.3.6.1.4.1.5655.4.1.4.1.1 no-access
Entry containing information about the Link.
                 linkModuleIndex 1.3.6.1.4.1.5655.4.1.4.1.1.1 integer32 read-only
An index value that uniquely identifies the module where this link is located.
                 linkIndex 1.3.6.1.4.1.5655.4.1.4.1.1.2 integer32 read-only
An index value that uniquely identifies this link within a module. Valid entries are 1 to the value of moduleNumLinks for this module.
                 linkAdminModeOnActive 1.3.6.1.4.1.5655.4.1.4.1.1.3 linkmodetype read-only
The desired mode of the link when the module's operating status is Active and the module is not in boot or failure. The possible modes are bypass, forwarding and sniffing. In bypass mode the traffic is forwarded from one port to the other using an internal splitter. In forwarding mode the traffic is forwarded through the internal hardware and software modules of the SE. In sniffing mode the traffic is passed in the same manner as in bypass mode, however a copy of the traffic is made and analyzed internally in the box.
                 linkAdminModeOnFailure 1.3.6.1.4.1.5655.4.1.4.1.1.4 linkmodetype read-only
The desired mode of the link when the system's operational status is Failure. The possible modes are Bypass and Cutoff. In Bypass mode the traffic is forwarded from one port to the other using an internal splitter. In Cutoff mode the traffic is dropped by the SE.
                 linkOperMode 1.3.6.1.4.1.5655.4.1.4.1.1.5 linkmodetype read-only
The operational mode of the link. In Bypass mode the traffic is forwarded from one port to the other using an internal splitter. In Forwarding mode the traffic is forwarded through the internal software and hardware modules of the SCE. In Sniffing mode the traffic is forwarded in the same manner as in Bypass mode, however the traffic is passed through the internal software and hardware modules of the SCE for analyzing. in Cutoff mode the traffic is dropped by the SCE platform.
                 linkStatusReflectionEnable 1.3.6.1.4.1.5655.4.1.4.1.1.6 integer read-only
Indicates if failure of the physical link on one i/f should trigger the failure of the link on the other i/f. Enumeration: 'disabled': 2, 'enabled': 1.
                 linkSubscriberSidePortIndex 1.3.6.1.4.1.5655.4.1.4.1.1.7 integer32 read-only
An index value that uniquely identifies this link with its related port that is connected to the subscriber side.
                 linkNetworkSidePortIndex 1.3.6.1.4.1.5655.4.1.4.1.1.8 integer32 read-only
An index value that uniquely identifies this link with its related port that is connected to the network side.
     diskGrp 1.3.6.1.4.1.5655.4.1.5
         diskNumUsedBytes 1.3.6.1.4.1.5655.4.1.5.1 unsigned32 read-only
The number of used bytes.
         diskNumFreeBytes 1.3.6.1.4.1.5655.4.1.5.2 unsigned32 read-only
The number of free bytes.
     rdrFormatterGrp 1.3.6.1.4.1.5655.4.1.6
         rdrFormatterEnable 1.3.6.1.4.1.5655.4.1.6.1 integer read-only
Indicates whether the RDR-formatter is enabled or disabled. When the RDR-formatter is enabled, it sends the reports it gets from the traffic processors to the Data Collector as defined in the rdrFormatterDestTable. Enumeration: 'disabled': 2, 'enabled': 1.
         rdrFormatterDestTable 1.3.6.1.4.1.5655.4.1.6.2 no-access
The RDR-formatter destinations table (0 to 3 entries). This table lists the addresses of Data Collectors. If the RDR-formatter is enabled, the destination with the highest priority that a TCP connection to it can be established would receive the reports generated by the traffic processors.
             rdrFormatterDestEntry 1.3.6.1.4.1.5655.4.1.6.2.1 no-access
A destination table entry.
                 rdrFormatterDestIPAddr 1.3.6.1.4.1.5655.4.1.6.2.1.1 ipaddress read-only
The IP address of a Data Collector.
                 rdrFormatterDestPort 1.3.6.1.4.1.5655.4.1.6.2.1.2 integer32 read-only
The TCP port on which the Data Collector listens.
                 rdrFormatterDestPriority 1.3.6.1.4.1.5655.4.1.6.2.1.3 integer32 read-only
The priority given to the Data Collector. The active Data Collector is the Data Collector with the highest priority and a TCP connection that is up.
                 rdrFormatterDestStatus 1.3.6.1.4.1.5655.4.1.6.2.1.4 integer read-only
In 'redundancy(2)' and in 'simpleLoadBalancing(3)' rdrFormatterForwardingMode there can be only one 'active' destination, which is where the reports are currently being sent to. In 'multicast(4)' modes all destinations will receive the active(2) status. Enumeration: 'active': 2, 'standby': 3, 'other': 1.
                 rdrFormatterDestConnectionStatus 1.3.6.1.4.1.5655.4.1.6.2.1.5 integer read-only
Indicates the status of TCP connection to this destination. Enumeration: 'down': 3, 'other': 1, 'up': 2.
                 rdrFormatterDestNumReportsSent 1.3.6.1.4.1.5655.4.1.6.2.1.6 unsigned32 read-only
Indicates the number of reports sent by the RDR-formatter to this destination.
                 rdrFormatterDestNumReportsDiscarded 1.3.6.1.4.1.5655.4.1.6.2.1.7 unsigned32 read-only
Indicates the number of reports dropped by the RDR-formatter on this destination.
                 rdrFormatterDestReportRate 1.3.6.1.4.1.5655.4.1.6.2.1.8 unsigned32 read-only
Indicates the rate of the reports (in reports per second) currently sent to this destination.
                 rdrFormatterDestReportRatePeak 1.3.6.1.4.1.5655.4.1.6.2.1.9 unsigned32 read-only
Indicates the maximum report rate sent to this destination.
                 rdrFormatterDestReportRatePeakTime 1.3.6.1.4.1.5655.4.1.6.2.1.10 timeticks read-only
Indicates the time since the rdrFormatterDestReportRatePeak value occurred.
         rdrFormatterNumReportsSent 1.3.6.1.4.1.5655.4.1.6.3 unsigned32 read-only
Indicates the number of reports sent by the RDR-formatter.
         rdrFormatterNumReportsDiscarded 1.3.6.1.4.1.5655.4.1.6.4 unsigned32 read-only
Indicates the number of reports dropped by the RDR-formatter.
         rdrFormatterClearCountersTime 1.3.6.1.4.1.5655.4.1.6.5 timeticks read-write
The time since RDR-formatter counters were last cleared. Writing a 0 to this object causes the RDR-formatter counters to be cleared.
         rdrFormatterReportRate 1.3.6.1.4.1.5655.4.1.6.6 unsigned32 read-only
Indicates the rate of the reports (in reports per second) currently sent to all of the destinations.
         rdrFormatterReportRatePeak 1.3.6.1.4.1.5655.4.1.6.7 unsigned32 read-only
Indicates the maximum report rate sent to all of the destinations.
         rdrFormatterReportRatePeakTime 1.3.6.1.4.1.5655.4.1.6.8 timeticks read-only
Indicates the time since the rdrFormatterReportRatePeak value occurred.
         rdrFormatterProtocol 1.3.6.1.4.1.5655.4.1.6.9 integer read-only
Indicates the RDR protocol currently in use. Enumeration: 'rdrv2': 3, 'rdrv1': 2, 'other': 1.
         rdrFormatterForwardingMode 1.3.6.1.4.1.5655.4.1.6.10 integer read-only
Indicates the mode of how the RDR formatter sends the reports to its destinations. Enumeration: 'simpleLoadBalancing': 3, 'other': 1, 'redundancy': 2, 'multicast': 4.
         rdrFormatterCategoryTable 1.3.6.1.4.1.5655.4.1.6.11 no-access
The RDR-formatter Category table. Describes the different categories of RDRs and RDR destination groups.
               rdrFormatterCategoryEntry 1.3.6.1.4.1.5655.4.1.6.11.1 no-access
A category table entry.
                   rdrFormatterCategoryIndex 1.3.6.1.4.1.5655.4.1.6.11.1.1 integer32 read-only
The category number.
                   rdrFormatterCategoryName 1.3.6.1.4.1.5655.4.1.6.11.1.2 snmpadminstring read-only
The name given to this category.
                   rdrFormatterCategoryNumReportsSent 1.3.6.1.4.1.5655.4.1.6.11.1.3 unsigned32 read-only
Indicates the number of reports sent by the RDR-formatter to this category.
                   rdrFormatterCategoryNumReportsDiscarded 1.3.6.1.4.1.5655.4.1.6.11.1.4 unsigned32 read-only
Indicates the number of reports dropped by the RDR-formatter on this category.
                   rdrFormatterCategoryReportRate 1.3.6.1.4.1.5655.4.1.6.11.1.5 unsigned32 read-only
Indicates the rate of the reports (in reports per second) currently sent to this category.
                   rdrFormatterCategoryReportRatePeak 1.3.6.1.4.1.5655.4.1.6.11.1.6 unsigned32 read-only
Indicates the maximum report rate sent to this category.
                   rdrFormatterCategoryReportRatePeakTime 1.3.6.1.4.1.5655.4.1.6.11.1.7 timeticks read-only
Indicates the time since the rdrFormatterCategoryReportRatePeak value occurred.
                   rdrFormatterCategoryNumReportsQueued 1.3.6.1.4.1.5655.4.1.6.11.1.8 unsigned32 read-only
Indicates the amount of pending reports in this category.
         rdrFormatterCategoryDestTable 1.3.6.1.4.1.5655.4.1.6.12 no-access
The RDR-formatter Category destinations table. This table lists the addresses of Data Collectors. If the RDR-formatter is enabled, the destination with the highest priority that a TCP connection to it can be established would receive the reports generated by the traffic processors.
               rdrFormatterCategoryDestEntry 1.3.6.1.4.1.5655.4.1.6.12.1 no-access
A destination table entry.
                   rdrFormatterCategoryDestPriority 1.3.6.1.4.1.5655.4.1.6.12.1.1 integer32 read-only
The priority given to the Data Collector for this category. The active Data Collector is the Data Collector with the highest priority and a TCP connection that is up.
                   rdrFormatterCategoryDestStatus 1.3.6.1.4.1.5655.4.1.6.12.1.2 integer read-only
In modes 'redundancy(2)' and in 'simpleLoadBalancing(3)' there can be only one 'active' destination, which is the destination to which reports are being sent. In 'multicast(4)' modes all destination will receive the 'active(2)' status. Enumeration: 'active': 2, 'standby': 3, 'other': 1.
     loggerGrp 1.3.6.1.4.1.5655.4.1.7
         loggerUserLogEnable 1.3.6.1.4.1.5655.4.1.7.1 integer read-only
Indicates whether the logging of user information is enabled or disabled. Enumeration: 'disabled': 2, 'enabled': 1.
         loggerUserLogNumInfo 1.3.6.1.4.1.5655.4.1.7.2 unsigned32 read-only
Indicates the number of Info messages logged into the user log file since last reboot or last time the counter was cleared.
         loggerUserLogNumWarning 1.3.6.1.4.1.5655.4.1.7.3 unsigned32 read-only
Indicates the number of Warning messages logged into the user log file since last reboot or last time the counter was cleared.
         loggerUserLogNumError 1.3.6.1.4.1.5655.4.1.7.4 unsigned32 read-only
Indicates the number of Error messages logged into the user log file since last reboot or last time the counter was cleared.
         loggerUserLogNumFatal 1.3.6.1.4.1.5655.4.1.7.5 unsigned32 read-only
Indicates the number of Fatal messages logged into the User-Log since last reboot or last time the counter was cleared.
         loggerUserLogClearCountersTime 1.3.6.1.4.1.5655.4.1.7.6 timeticks read-write
The time since user log counters were last cleared. Writing a 0 to this object causes the user log counters to be cleared.
     subscribersGrp 1.3.6.1.4.1.5655.4.1.8
         subscribersInfoTable 1.3.6.1.4.1.5655.4.1.8.1 no-access
The subscribers information table consists of data regarding subscribers management operations performed.
             subscribersInfoEntry 1.3.6.1.4.1.5655.4.1.8.1.1 no-access
A SubscribersInfoEntry entry.
                 subscribersNumIntroduced 1.3.6.1.4.1.5655.4.1.8.1.1.1 unsigned32 read-only
Indicates the current number of subscribers introduced to the SCE. These subscribers may or may not have IP address or VLAN mappings. Subscribers who do not have mappings of any kind cannot be associated with traffic, thus will be served by the SCE according to the default settings.
                 subscribersNumFree 1.3.6.1.4.1.5655.4.1.8.1.1.2 unsigned32 read-only
Indicates the number of subscribers that may be introduced in addition to the subscribers that are already introduced to the SCE (subscribersNumIntroduced).
                 subscribersNumIpAddrMappings 1.3.6.1.4.1.5655.4.1.8.1.1.3 unsigned32 read-only
Indicates the current number of 'IP address to subscriber' mappings.
                 subscribersNumIpAddrMappingsFree 1.3.6.1.4.1.5655.4.1.8.1.1.4 unsigned32 read-only
Indicates the number of free 'IP address to subscriber' mappings that may be used for defining new mappings.
                 subscribersNumIpRangeMappings 1.3.6.1.4.1.5655.4.1.8.1.1.5 unsigned32 read-only
Indicates the current number of 'IP-range to subscriber' mappings.
                 subscribersNumIpRangeMappingsFree 1.3.6.1.4.1.5655.4.1.8.1.1.6 unsigned32 read-only
Indicates the number of free 'IP-range to subscriber' mappings that may be used for defining new mappings.
                 subscribersNumVlanMappings 1.3.6.1.4.1.5655.4.1.8.1.1.7 unsigned32 read-only
Indicates the current number of VLAN to subscribers mappings.
                 subscribersNumVlanMappingsFree 1.3.6.1.4.1.5655.4.1.8.1.1.8 unsigned32 read-only
Indicates the number of free 'VLAN to subscriber' mappings that may be used for defining new mappings.
                 subscribersNumActive 1.3.6.1.4.1.5655.4.1.8.1.1.9 unsigned32 read-only
Indicates the current number of active subscribers, these subscribers necessarily have an IP address or VLAN mappings that define the traffic that should be associated and served according to the subscriber service agreement.
                 subscribersNumActivePeak 1.3.6.1.4.1.5655.4.1.8.1.1.10 unsigned32 read-only
Indicates the peak value of subscribersNumActive since the last time it was cleared or the system started.
                 subscribersNumActivePeakTime 1.3.6.1.4.1.5655.4.1.8.1.1.11 timeticks read-only
Indicates the time since the subscribersNumActivePeak value occurred.
                 subscribersNumUpdates 1.3.6.1.4.1.5655.4.1.8.1.1.12 unsigned32 read-only
Indicates the accumulated number of subscribers database updates received by the SCE.
                 subscribersCountersClearTime 1.3.6.1.4.1.5655.4.1.8.1.1.13 timeticks read-write
Indicates the time since the subscribers counters were cleared. Writing a 0 to this object causes the counters to be cleared.
                 subscribersNumTpIpRanges 1.3.6.1.4.1.5655.4.1.8.1.1.14 unsigned32 read-only
Indicates the current number of 'Traffic Processor IP ranges' used.
                 subscribersNumTpIpRangesFree 1.3.6.1.4.1.5655.4.1.8.1.1.15 unsigned32 read-only
Indicates the number of free 'Traffic Processor IP ranges'.
                 subscribersNumAnonymous 1.3.6.1.4.1.5655.4.1.8.1.1.16 unsigned32 read-only
Indicates the current number of anonymous subscribers.
                 subscribersNumWithSessions 1.3.6.1.4.1.5655.4.1.8.1.1.17 unsigned32 read-only
Indicates the current number of subscribers with open sessions.
         subscribersPropertiesTable 1.3.6.1.4.1.5655.4.1.8.2 no-access
The subscribers properties table provides the list of properties available for each subscriber.
             subscribersPropertiesEntry 1.3.6.1.4.1.5655.4.1.8.2.1 no-access
A subscribersPropertiesTable entry.
                 spIndex 1.3.6.1.4.1.5655.4.1.8.2.1.1 integer32 read-only
An index value that uniquely identify the property.
                 spName 1.3.6.1.4.1.5655.4.1.8.2.1.2 snmpadminstring read-only
Subscriber property name.
                 spType 1.3.6.1.4.1.5655.4.1.8.2.1.3 snmpadminstring read-only
Subscriber application property type in respect to: variable type (integer, boolean, string etc), number of elements (scalar or array) and restrictions if any exist.
         subscribersPropertiesValueTable 1.3.6.1.4.1.5655.4.1.8.3 no-access
The subscribers properties value table is used to provide subscriber properties values for subscribers introduced into the SCE. An entry must be created by setting the entry's spvRowStatus object with createAndGo (4) before setting any other of the entry's objects. To specify the subscriber's property set the spvSubName and spvPropertyName objects. The spvPropertyName must be one of the properties from the subscribersPropertiesTable. To remove an entry set the spvRowStatus object with destroy (6). To poll the subscriber property the manager need to poll the spvPropertyStringValue, the spvPropertyUintValue or the spvPropertyCounter64Value objects. The table is cleared when the application is unloaded.
             subscribersPropertiesValueEntry 1.3.6.1.4.1.5655.4.1.8.3.1 no-access
A subscribersPropertiesValueTable entry.
                 spvIndex 1.3.6.1.4.1.5655.4.1.8.3.1.1 integer32 no-access
A index to the table.
                 spvSubName 1.3.6.1.4.1.5655.4.1.8.3.1.2 snmpadminstring read-only
A name that uniquely identifies the subscriber.
                 spvPropertyName 1.3.6.1.4.1.5655.4.1.8.3.1.3 snmpadminstring read-only
A name that uniquely identifies the subscriber property. Array type properties may be accessed each element at a time in C like format, e.g. x[1], or y[1][2].
                 spvRowStatus 1.3.6.1.4.1.5655.4.1.8.3.1.4 rowstatus read-only
This object controls creation of a table entry. Only setting the createAndGo (4) and destroy (6) will change the status of the entry.
                 spvPropertyStringValue 1.3.6.1.4.1.5655.4.1.8.3.1.5 snmpadminstring read-only
The value of the subscriber property in string format.
                 spvPropertyUintValue 1.3.6.1.4.1.5655.4.1.8.3.1.6 unsigned32 read-only
The value of the subscriber property in unsigned integer. If the property can't be casted to unsigned integer this object returns zero.
                 spvPropertyCounter64Value 1.3.6.1.4.1.5655.4.1.8.3.1.7 counter64 read-only
The value of the subscriber property in Counter64. If the property can't be casted to Counter64 this object returns zero.
     trafficProcessorGrp 1.3.6.1.4.1.5655.4.1.9
         tpInfoTable 1.3.6.1.4.1.5655.4.1.9.1 no-access
The Traffic Processor Info table consists of data regarding traffic handled by the traffic processors by classification of packets and flows.
             tpInfoEntry 1.3.6.1.4.1.5655.4.1.9.1.1 no-access
A tpInfoTable entry.
                 tpModuleIndex 1.3.6.1.4.1.5655.4.1.9.1.1.1 integer32 read-only
An index value that uniquely identifies the module where this traffic processor is located.
                 tpIndex 1.3.6.1.4.1.5655.4.1.9.1.1.2 integer32 read-only
An index value that uniquely identifies this traffic processor within a module. The value is determined by the location of the traffic processor on the module. Valid entries are 1 to the value of moduleNumTrafficProcessors for this module.
                 tpTotalNumHandledPackets 1.3.6.1.4.1.5655.4.1.9.1.1.3 unsigned32 read-only
Indicates the accumulated number of packets handled by this traffic processor since last reboot or last time this counter was cleared.
                 tpTotalNumHandledFlows 1.3.6.1.4.1.5655.4.1.9.1.1.4 unsigned32 read-only
Indicates the accumulated number of flows handled by this traffic Processor since last reboot or last time this counter was cleared.
                 tpNumActiveFlows 1.3.6.1.4.1.5655.4.1.9.1.1.5 unsigned32 read-only
Indicates the number of flows currently being handled by this traffic processor.
                 tpNumActiveFlowsPeak 1.3.6.1.4.1.5655.4.1.9.1.1.6 unsigned32 read-only
Indicates the peak value of tpNumActiveFlows since the last time it was cleared or the system started.
                 tpNumActiveFlowsPeakTime 1.3.6.1.4.1.5655.4.1.9.1.1.7 timeticks read-only
Indicates the time since the tpNumActiveFlowsPeak value occurred.
                 tpNumTcpActiveFlows 1.3.6.1.4.1.5655.4.1.9.1.1.8 unsigned32 read-only
Indicates the number of TCP flows currently being handled by this traffic processor.
                 tpNumTcpActiveFlowsPeak 1.3.6.1.4.1.5655.4.1.9.1.1.9 unsigned32 read-only
Indicates the peak value of tpNumTcpActiveFlows since the last time it was cleared or the system started.
                 tpNumTcpActiveFlowsPeakTime 1.3.6.1.4.1.5655.4.1.9.1.1.10 timeticks read-only
Indicates the time since the tpNumTcpActiveFlowsPeak value occurred.
                 tpNumUdpActiveFlows 1.3.6.1.4.1.5655.4.1.9.1.1.11 unsigned32 read-only
Indicates the number of UDP flows currently being handled by this traffic processor.
                 tpNumUdpActiveFlowsPeak 1.3.6.1.4.1.5655.4.1.9.1.1.12 unsigned32 read-only
Indicates the peak value of tpNumUdpActiveFlows since the last time it was cleared or the system started.
                 tpNumUdpActiveFlowsPeakTime 1.3.6.1.4.1.5655.4.1.9.1.1.13 timeticks read-only
Indicates the time since the tpNumUdpActiveFlowsPeak value occurred.
                 tpNumNonTcpUdpActiveFlows 1.3.6.1.4.1.5655.4.1.9.1.1.14 unsigned32 read-only
Indicates the number of non TCP/UDP flows currently being handled by this traffic processor.
                 tpNumNonTcpUdpActiveFlowsPeak 1.3.6.1.4.1.5655.4.1.9.1.1.15 unsigned32 read-only
Indicates the peak value of tpNumNonTcpUdpActiveFlows since the last time it was cleared or the system started.
                 tpNumNonTcpUdpActiveFlowsPeakTime 1.3.6.1.4.1.5655.4.1.9.1.1.16 timeticks read-only
Indicates the time since the tpNumNonTcpUdpActiveFlowsPeak value occurred.
                 tpTotalNumBlockedPackets 1.3.6.1.4.1.5655.4.1.9.1.1.17 unsigned32 read-only
Indicates the accumulated number of packets discarded by this traffic processor according to application blocking rules.
                 tpTotalNumBlockedFlows 1.3.6.1.4.1.5655.4.1.9.1.1.18 unsigned32 read-only
Indicates the accumulated number of flows discarded by this traffic processor according to application blocking rules.
                 tpTotalNumDiscardedPacketsDueToBwLimit 1.3.6.1.4.1.5655.4.1.9.1.1.19 unsigned32 read-only
Indicates the accumulated number of packets discarded by this traffic processor due to subscriber bandwidth limitations.
                 tpTotalNumWredDiscardedPackets 1.3.6.1.4.1.5655.4.1.9.1.1.20 unsigned32 read-only
Indicates the accumulated number of packets discarded by this traffic processor due to congestion in the queues.
                 tpTotalNumFragments 1.3.6.1.4.1.5655.4.1.9.1.1.21 unsigned32 read-only
Indicates the accumulated number of fragmented packets handled by this traffic processor.
                 tpTotalNumNonIpPackets 1.3.6.1.4.1.5655.4.1.9.1.1.22 unsigned32 read-only
Indicates the accumulated number of non IP packets handled by this traffic processor.
                 tpTotalNumIpCrcErrPackets 1.3.6.1.4.1.5655.4.1.9.1.1.23 unsigned32 read-only
Indicates the accumulated number of packets with IP CRC error handled by this traffic processor.
                 tpTotalNumIpLengthErrPackets 1.3.6.1.4.1.5655.4.1.9.1.1.24 unsigned32 read-only
Indicates the accumulated number of packets with IP length error handled by this traffic processor.
                 tpTotalNumIpBroadcastPackets 1.3.6.1.4.1.5655.4.1.9.1.1.25 unsigned32 read-only
Indicates the accumulated number of IP broadcast packets handled by this traffic processor.
                 tpTotalNumTtlErrPackets 1.3.6.1.4.1.5655.4.1.9.1.1.26 unsigned32 read-only
Indicates the accumulated number of packets with TTL error handled by this traffic processor.
                 tpTotalNumTcpUdpCrcErrPackets 1.3.6.1.4.1.5655.4.1.9.1.1.27 unsigned32 read-only
Indicates the accumulated number of TCP/UDP packets with CRC error handled by this traffic processor.
                 tpClearCountersTime 1.3.6.1.4.1.5655.4.1.9.1.1.28 timeticks read-write
Indicates the time since the traffic processor statistics counters were last cleared. Writing a 0 to this object causes the traffic processor counters to be cleared.
                 tpHandledPacketsRate 1.3.6.1.4.1.5655.4.1.9.1.1.29 unsigned32 read-only
Indicates the rate in packets per second of the packets handled by this traffic processor.
                 tpHandledPacketsRatePeak 1.3.6.1.4.1.5655.4.1.9.1.1.30 unsigned32 read-only
Indicates the peak value of tpHandledPacketsRate since the last time it was cleared or the system started.
                 tpHandledPacketsRatePeakTime 1.3.6.1.4.1.5655.4.1.9.1.1.31 timeticks read-only
Indicates the time since the tpHandledPacketsRatePeak value occurred.
                 tpHandledFlowsRate 1.3.6.1.4.1.5655.4.1.9.1.1.32 unsigned32 read-only
Indicates the rate in flows opening per second of the flows handled by this traffic processor.
                 tpHandledFlowsRatePeak 1.3.6.1.4.1.5655.4.1.9.1.1.33 unsigned32 read-only
Indicates the peak value of tpHandledFlowsRate since the last time it was cleared or the system started.
                 tpHandledFlowsRatePeakTime 1.3.6.1.4.1.5655.4.1.9.1.1.34 timeticks read-only
Indicates the time since the tpHandledFlowsRatePeakTime value occurred.
                 tpCpuUtilization 1.3.6.1.4.1.5655.4.1.9.1.1.35 integer32 read-only
Indicates the percentage of CPU utilization, updated once every 2 minutes.
                 tpCpuUtilizationPeak 1.3.6.1.4.1.5655.4.1.9.1.1.36 integer32 read-only
Indicates the peak value of tpCpuUtilization since the last time it was cleared or the system started.
                 tpCpuUtilizationPeakTime 1.3.6.1.4.1.5655.4.1.9.1.1.37 timeticks read-only
Indicates the time since the tpCpuUtilizationPeak value occurred.
                 tpFlowsCapacityUtilization 1.3.6.1.4.1.5655.4.1.9.1.1.38 integer32 read-only
Indicates the percentage of flows capacity utilization.
                 tpFlowsCapacityUtilizationPeak 1.3.6.1.4.1.5655.4.1.9.1.1.39 integer32 read-only
Indicates the peak value of tpFlowsCapacityUtilization since the last time it was cleared or the system started.
                 tpFlowsCapacityUtilizationPeakTime 1.3.6.1.4.1.5655.4.1.9.1.1.40 timeticks read-only
Indicates the time since the tpFlowsCapacityUtilizationPeak value occurred.
                 tpServiceLoss 1.3.6.1.4.1.5655.4.1.9.1.1.41 integer32 read-only
Indicates the relative amount of service loss in this traffic Processor, in units of 0.001%, since last reboot or last time this counter was cleared.
     pportGrp 1.3.6.1.4.1.5655.4.1.10
           pportTable 1.3.6.1.4.1.5655.4.1.10.1 no-access
A list of port entries. The number of entries is determined by the number of modules in the chassis and the number of ports on each module.
               pportEntry 1.3.6.1.4.1.5655.4.1.10.1.1 no-access
Entry containing information for a particular port on a module.
                   pportModuleIndex 1.3.6.1.4.1.5655.4.1.10.1.1.1 integer32 read-only
An index value that uniquely identifies the module where this port is located.
                   pportIndex 1.3.6.1.4.1.5655.4.1.10.1.1.2 integer32 read-only
An index value that uniquely identifies this port within a module. The value is determined by the location of the port on the module. Valid entries are 1 to the value of moduleNumPorts for this module.
                   pportType 1.3.6.1.4.1.5655.4.1.10.1.1.3 integer read-only
The type of physical layer medium dependent interface on the port. Enumeration: 'e100BaseTX': 11, 'e1000BaseSX': 28, 'other': 1, 'e1000BaseT': 15.
                   pportNumTxQueues 1.3.6.1.4.1.5655.4.1.10.1.1.4 integer32 read-only
The number of transmit queues supported by this port.
                   pportIfIndex 1.3.6.1.4.1.5655.4.1.10.1.1.5 integer32 read-only
The value of the instance of the ifIndex object, defined in MIB-II, for this port.
                   pportAdminSpeed 1.3.6.1.4.1.5655.4.1.10.1.1.6 integer read-only
The desired speed of the port. The current operational speed of the port can be determined from ifSpeed. Enumeration: 's10000000': 10000000, 's100000000': 100000000, 'autoNegotiation': 1, 's1000000000': 1000000000.
                   pportAdminDuplex 1.3.6.1.4.1.5655.4.1.10.1.1.7 integer read-only
The desired duplex of the port. Enumeration: 'auto': 4, 'full': 2, 'half': 1.
                   pportOperDuplex 1.3.6.1.4.1.5655.4.1.10.1.1.8 integer read-only
Indicates whether the port is operating in half-duplex or full-duplex. Enumeration: 'full': 2, 'half': 1.
                   pportLinkIndex 1.3.6.1.4.1.5655.4.1.10.1.1.9 integer32 read-only
Indicates the linkIndex of the link that this port belongs to. Value of 0 indicates that this port is not associated with any link. Value of -1 indicates that this port is associated to multiple links.
                   pportOperStatus 1.3.6.1.4.1.5655.4.1.10.1.1.10 integer read-only
Indicates the status of the port and if the port is down indicates the reason. Enumeration: 'other': 1, 'reflectionForcingDown': 3, 'up': 2, 'redundancyForcingDown': 4, 'otherDown': 5.
     txQueuesGrp 1.3.6.1.4.1.5655.4.1.11
           txQueuesTable 1.3.6.1.4.1.5655.4.1.11.1 no-access
This table consists of information on the SCE's transmit queues.
               txQueuesEntry 1.3.6.1.4.1.5655.4.1.11.1.1 no-access
A txQueuesTable entry.
                   txQueuesModuleIndex 1.3.6.1.4.1.5655.4.1.11.1.1.1 integer32 read-only
An index value that uniquely identifies the module where this queue is located.
                   txQueuesPortIndex 1.3.6.1.4.1.5655.4.1.11.1.1.2 integer32 read-only
An index value that uniquely identifies the port where this queue is located.
                   txQueuesQueueIndex 1.3.6.1.4.1.5655.4.1.11.1.1.3 integer32 read-only
An index value that uniquely identifies this queue within a port. The value is determined by the location of the queue on the port. Valid entries are 1 to the value of portNumTxQueues for this module.
                   txQueuesDescription 1.3.6.1.4.1.5655.4.1.11.1.1.4 snmpadminstring read-only
Description of the transmit queue.
                   txQueuesBandwidth 1.3.6.1.4.1.5655.4.1.11.1.1.5 integer32 read-only
The bandwidth in L1 kbps configured for this queue.
                   txQueuesUtilization 1.3.6.1.4.1.5655.4.1.11.1.1.6 integer32 read-only
The percentage of bandwidth utilization relative to the configured rate.
                   txQueuesUtilizationPeak 1.3.6.1.4.1.5655.4.1.11.1.1.7 integer32 read-only
Indicates the peak value of txQueuesUtilization since the last time it was cleared or the system started.
                   txQueuesUtilizationPeakTime 1.3.6.1.4.1.5655.4.1.11.1.1.8 timeticks read-only
Indicates the time since the txQueuesUtilizationPeak value occurred.
                   txQueuesClearCountersTime 1.3.6.1.4.1.5655.4.1.11.1.1.9 timeticks read-write
Indicates the time since the TX queues statistics counters were last cleared. Writing a 0 to this object causes the TX queues counters to be cleared.
                   txQueuesDroppedBytes 1.3.6.1.4.1.5655.4.1.11.1.1.10 counter64 read-only
Amount of dropped L3 bytes. This is valid only if the system is configured to count dropped bytes per TX queue.
     globalControllersGrp 1.3.6.1.4.1.5655.4.1.12
           globalControllersTable 1.3.6.1.4.1.5655.4.1.12.1 no-access
This table consists of information on the SCE's Global Controllers. note: the globalControllersIndex and the SCE CLI configuration index have a offset of one i.e. 1 in the MIB refers to 0 in the CLI.
               globalControllersEntry 1.3.6.1.4.1.5655.4.1.12.1.1 no-access
A globalControllersTable entry.
                   globalControllersModuleIndex 1.3.6.1.4.1.5655.4.1.12.1.1.1 integer32 read-only
An index value that uniquely identifies the module where this controller is located.
                   globalControllersPortIndex 1.3.6.1.4.1.5655.4.1.12.1.1.2 integer32 read-only
An index value that uniquely identifies the port where this controller is located.
                   globalControllersIndex 1.3.6.1.4.1.5655.4.1.12.1.1.3 integer32 read-only
An index value that uniquely identifies this controller within a port.
                   globalControllersDescription 1.3.6.1.4.1.5655.4.1.12.1.1.4 snmpadminstring read-only
Description of the controller.
                   globalControllersBandwidth 1.3.6.1.4.1.5655.4.1.12.1.1.5 integer32 read-only
The L1 bandwidth configured for this controller.
                   globalControllersUtilization 1.3.6.1.4.1.5655.4.1.12.1.1.6 integer32 read-only
The percentage of bandwidth utilization relative to the configured rate.
                   globalControllersUtilizationPeak 1.3.6.1.4.1.5655.4.1.12.1.1.7 integer32 read-only
Indicates the peak value of globalControllersUtilization since the last time it was cleared or the system started.
                   globalControllersUtilizationPeakTime 1.3.6.1.4.1.5655.4.1.12.1.1.8 timeticks read-only
Indicates the time since the globalControllersUtilizationPeak value occurred.
                   globalControllersClearCountersTime 1.3.6.1.4.1.5655.4.1.12.1.1.9 timeticks read-write
Indicates the time since the controllers statistics counters were last cleared. Writing a 0 to this object causes the controllers counters to be cleared.
                   globalControllersDroppedBytes 1.3.6.1.4.1.5655.4.1.12.1.1.10 counter64 read-only
Amount of L3 dropped bytes. This is valid only if the system is configured to count dropped bytes per global controller.
     applicationGrp 1.3.6.1.4.1.5655.4.1.13
           appInfoTable 1.3.6.1.4.1.5655.4.1.13.1 no-access
This table consists of information on the SCE's application.
               appInfoEntry 1.3.6.1.4.1.5655.4.1.13.1.1 no-access
A appInfoTable entry.
                   appName 1.3.6.1.4.1.5655.4.1.13.1.1.1 snmpadminstring read-only
The application name.
                   appDescription 1.3.6.1.4.1.5655.4.1.13.1.1.2 snmpadminstring read-only
The application description.
                   appVersion 1.3.6.1.4.1.5655.4.1.13.1.1.3 snmpadminstring read-only
The application version.
           appPropertiesTable 1.3.6.1.4.1.5655.4.1.13.2 no-access
The application properties table provides the list of properties available for the application. The table is cleared when the application is unloaded.
               appPropertiesEntry 1.3.6.1.4.1.5655.4.1.13.2.1 no-access
A appPropertiesTable entry.
                   apIndex 1.3.6.1.4.1.5655.4.1.13.2.1.1 integer32 read-only
An index value that uniquely identify the property.
                   apName 1.3.6.1.4.1.5655.4.1.13.2.1.2 snmpadminstring read-only
Application property name. Property can be either scalar or array type.
                   apType 1.3.6.1.4.1.5655.4.1.13.2.1.3 snmpadminstring read-only
Application property type.
           appPropertiesValueTable 1.3.6.1.4.1.5655.4.1.13.3 no-access
The applications properties value table is used to provide specific values for the applications properties. An entry must be created by setting the entry's apvRowStatus object with createAndGo (4) before setting the name of the property requested. To specify the property set the apvPropertyName objects. The apvPropertyName must be one of the properties from the appPropertiesTable. To remove an entry set the apvRowStatus object with destroy (6). To poll the application property, poll the apvPropertyStringValue, apvPropertyUintValue, or apvPropertyCounter64Value object. The table is cleared when the application is unloaded.
               appPropertiesValueEntry 1.3.6.1.4.1.5655.4.1.13.3.1 no-access
A appPropertiesValueTable entry.
                   apvIndex 1.3.6.1.4.1.5655.4.1.13.3.1.1 integer32 no-access
Index to the table.
                   apvPropertyName 1.3.6.1.4.1.5655.4.1.13.3.1.2 snmpadminstring read-only
A name that uniquely identifies the application property. Array type properties may be accessed each element at a time in C like format, e.g. x[1], or y[1][2].
                   apvRowStatus 1.3.6.1.4.1.5655.4.1.13.3.1.3 rowstatus read-only
This object controls creation of a table entry.
                   apvPropertyStringValue 1.3.6.1.4.1.5655.4.1.13.3.1.4 snmpadminstring read-only
The value of the application property in display string format.
                   apvPropertyUintValue 1.3.6.1.4.1.5655.4.1.13.3.1.5 unsigned32 read-only
The value of the application property in unsigned integer. If the property can't be casted to unsigned integer this object returns zero.
                   apvPropertyCounter64Value 1.3.6.1.4.1.5655.4.1.13.3.1.6 counter64 read-only
The value of the application property in Counter64 format. If the property can't be casted to Counter64, getting this object returns zero.
     trafficCountersGrp 1.3.6.1.4.1.5655.4.1.14
           trafficCountersTable 1.3.6.1.4.1.5655.4.1.14.1 no-access
The Traffic counters table provides information regarding the value of different the traffic counters.
               trafficCountersEntry 1.3.6.1.4.1.5655.4.1.14.1.1 no-access
Entry containing information about a traffic counter.
                   trafficCounterIndex 1.3.6.1.4.1.5655.4.1.14.1.1.1 integer32 read-only
An index value that uniquely identifies the counter.
                   trafficCounterValue 1.3.6.1.4.1.5655.4.1.14.1.1.2 counter64 read-only
A 64 bit counter value.
                   trafficCounterName 1.3.6.1.4.1.5655.4.1.14.1.1.3 snmpadminstring read-only
The name given to this counter.
                   trafficCounterType 1.3.6.1.4.1.5655.4.1.14.1.1.4 integer read-only
Defines whether there the traffic counters counts by 'packets(3)' or by 'bytes(2)'. Enumeration: 'packets': 3, 'other': 1, 'bytes': 2.
     attackGrp 1.3.6.1.4.1.5655.4.1.15
           attackTypeTable 1.3.6.1.4.1.5655.4.1.15.1 no-access
The Attack type table provides information regarding detected attacks, aggregated by attack type.
               attackTypeEntry 1.3.6.1.4.1.5655.4.1.15.1.1 no-access
Entry containing aggregated information about attacks of a given type.
                   attackTypeIndex 1.3.6.1.4.1.5655.4.1.15.1.1.1 integer32 read-only
An index value that uniquely identifies the attack type.
                   attackTypeName 1.3.6.1.4.1.5655.4.1.15.1.1.2 snmpadminstring read-only
The name of this attack type.
                   attackTypeCurrentNumAttacks 1.3.6.1.4.1.5655.4.1.15.1.1.3 unsigned32 read-only
The current amount of attacks detected of this type.
                   attackTypeTotalNumAttacks 1.3.6.1.4.1.5655.4.1.15.1.1.4 unsigned32 read-only
The total amount of attacks detected of this type since last clear.
                   attackTypeTotalNumFlows 1.3.6.1.4.1.5655.4.1.15.1.1.5 counter64 read-only
The total amount of flows in attacks detected of this type since last clear.
                   attackTypeTotalNumSeconds 1.3.6.1.4.1.5655.4.1.15.1.1.6 unsigned32 read-only
The total duration of attacks detected of this type since last clear.
     vasTrafficForwardingGrp 1.3.6.1.4.1.5655.4.1.16
           vasServerTable 1.3.6.1.4.1.5655.4.1.16.1 no-access
The VAS server Table provides information on each VAS server operational status.
               vasServerEntry 1.3.6.1.4.1.5655.4.1.16.1.1 no-access
Entry containing information about VAS server status.
                   vasServerIndex 1.3.6.1.4.1.5655.4.1.16.1.1.1 integer32 read-only
An index value that uniquely identifies a VAS server.
                   vasServerId 1.3.6.1.4.1.5655.4.1.16.1.1.2 integer32 read-only
The ID of the VAS server.
                   vasServerAdminStatus 1.3.6.1.4.1.5655.4.1.16.1.1.3 integer read-only
Indicates only the administrative status of the VAS sever, in order to activate a server it should be also configured with a VLAN and a group. Enumeration: 'down': 3, 'other': 1, 'up': 2.
                   vasServerOperStatus 1.3.6.1.4.1.5655.4.1.16.1.1.4 integer read-only
Indicates the operational status of the VAS sever. Enumeration: 'down': 3, 'other': 1, 'up': 2.
     mplsVpnAutoLearnGrp 1.3.6.1.4.1.5655.4.1.17
           mplsVpnSoftwareCountersTable 1.3.6.1.4.1.5655.4.1.17.1 no-access
The MPLS VPN software counters table provides information on various system software counters related to MPLS VPN auto learn.
               mplsVpnSoftwareCountersEntry 1.3.6.1.4.1.5655.4.1.17.1.1 no-access
Entry containing information about MPLS VPN auto learn SW counters.
                   mplsVpnMaxHWMappings 1.3.6.1.4.1.5655.4.1.17.1.1.1 integer32 read-only
The maximum number of MPLS VPN mappings supported by HW (including all kinds of mappings).
                   mplsVpnCurrentHWMappings 1.3.6.1.4.1.5655.4.1.17.1.1.2 integer32 read-only
The current number of HW MPLS VPN mappings in use.