PARAGON-MIB: View SNMP OID List / Download MIB

VENDOR: DUPONT EOP


 Home MIB: PARAGON-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC, RFC1158-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 enterprises 1.3.6.1.4.1
     dupont 1.3.6.1.4.1.159
             temporary 1.3.6.1.4.1.159.1
                 dupHubMgmt 1.3.6.1.4.1.159.1.1
                     duphmBasicCapability 1.3.6.1.4.1.159.1.1.1
                         duphmBasicHubTable 1.3.6.1.4.1.159.1.1.1.1 no-access
duphmBasicHubTable is table depicting the basic 802.3 Hub Management objects.
                             duphmBasicHubEntry 1.3.6.1.4.1.159.1.1.1.1.1 no-access
duphmBasicHubEntry is the entry for a specifed Hub in the duphmBasicHubTable.
                                 duphubID 1.3.6.1.4.1.159.1.1.1.1.1.1 integer read-only
                                 duphubGroupCapacity 1.3.6.1.4.1.159.1.1.1.1.1.2 integer read-only
                                 duphubGroupMap 1.3.6.1.4.1.159.1.1.1.1.1.3 octet string read-only
                         duphmBasicGroupTable 1.3.6.1.4.1.159.1.1.1.2 no-access
                             duphmBasicGroupEntry 1.3.6.1.4.1.159.1.1.1.2.1 no-access
                                 dupgroupHubID 1.3.6.1.4.1.159.1.1.1.2.1.1 integer read-only
                                 dupgroupID 1.3.6.1.4.1.159.1.1.1.2.1.2 integer read-only
                                 dupgroupNumberOfPorts 1.3.6.1.4.1.159.1.1.1.2.1.3 integer read-only
                         duphmBasicPortTable 1.3.6.1.4.1.159.1.1.1.3 no-access
                             duphmBasicPortEntry 1.3.6.1.4.1.159.1.1.1.3.1 no-access
                                 dupportHubBasicID 1.3.6.1.4.1.159.1.1.1.3.1.1 integer read-only
                                 dupportGroupBasicID 1.3.6.1.4.1.159.1.1.1.3.1.2 integer read-only
                                 dupportBasicID 1.3.6.1.4.1.159.1.1.1.3.1.3 integer read-only
                                 dupportType 1.3.6.1.4.1.159.1.1.1.3.1.4 integer read-only
Enumeration: 'tenBASE-FSynch': 4, 'other': 1, 'repeater': 2, 'tenBASE-FAsync': 3.
                                 dupportAdminState 1.3.6.1.4.1.159.1.1.1.3.1.5 integer read-write
Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
                                 dupportAutoPartitionState 1.3.6.1.4.1.159.1.1.1.3.1.6 integer read-only
Enumeration: 'notAutoPartitioned': 2, 'other': 1, 'autoPartitioned': 3.
                     duphmSelfTestCapability 1.3.6.1.4.1.159.1.1.2
                         duphmSelfTestHubTable 1.3.6.1.4.1.159.1.1.2.1 no-access
                             duphmSelfTestHubEntry 1.3.6.1.4.1.159.1.1.2.1.1 no-access
                                 duphubSelfTestID 1.3.6.1.4.1.159.1.1.2.1.1.1 integer read-only
                                 duptimeSinceHubSystemReset 1.3.6.1.4.1.159.1.1.2.1.1.2 integer read-only
                                 duphubResetTimeStamp 1.3.6.1.4.1.159.1.1.2.1.1.3 integer read-only
                                 duphubHealthState 1.3.6.1.4.1.159.1.1.2.1.1.4 integer read-only
Enumeration: 'failed': 3, 'other': 1, 'ok': 2.
                                 duphubHealthText 1.3.6.1.4.1.159.1.1.2.1.1.5 displaystring read-only
                                 duphubHealthData 1.3.6.1.4.1.159.1.1.2.1.1.6 octet string read-only
                                 duphubSystemResetting 1.3.6.1.4.1.159.1.1.2.1.1.7 integer read-write
Enumeration: 'notResetting': 1, 'resetting': 2.
                                 duphubResetting 1.3.6.1.4.1.159.1.1.2.1.1.8 integer read-write
Enumeration: 'notResetting': 1, 'resetting': 2.
                                 duphubExecutingSelfTest 1.3.6.1.4.1.159.1.1.2.1.1.9 integer read-write
Enumeration: 'selfTesting': 2, 'notSelfTesting': 1.
                     duphmPerfMonCapability 1.3.6.1.4.1.159.1.1.3
                         duphmPerfMonRelayTable 1.3.6.1.4.1.159.1.1.3.1 no-access
                             duphmPerfMonRelayEntry 1.3.6.1.4.1.159.1.1.3.1.1 no-access
                                 duprelayHubPerfID 1.3.6.1.4.1.159.1.1.3.1.1.1 integer read-only
                                 duprelayPerfID 1.3.6.1.4.1.159.1.1.3.1.1.2 integer read-only
                                 duprelayTotalCollisions 1.3.6.1.4.1.159.1.1.3.1.1.3 counter read-only
                         duphmPerfMonPortTable 1.3.6.1.4.1.159.1.1.3.2 no-access
                             duphmPerfMonPortEntry 1.3.6.1.4.1.159.1.1.3.2.1 no-access
                                 dupportHubPerfID 1.3.6.1.4.1.159.1.1.3.2.1.1 integer read-only
                                 dupportGroupPerfID 1.3.6.1.4.1.159.1.1.3.2.1.2 integer read-only
                                 dupportPerfID 1.3.6.1.4.1.159.1.1.3.2.1.3 integer read-only
                                 dupportReadableFrames 1.3.6.1.4.1.159.1.1.3.2.1.4 counter read-only
                                 dupportReadableOctets 1.3.6.1.4.1.159.1.1.3.2.1.5 counter read-only
                                 dupportShortEvents 1.3.6.1.4.1.159.1.1.3.2.1.6 counter read-only
                                 dupportRunts 1.3.6.1.4.1.159.1.1.3.2.1.7 counter read-only
                                 dupportFrameCheckSeqErrs 1.3.6.1.4.1.159.1.1.3.2.1.8 counter read-only
                                 dupportAlignmentErrors 1.3.6.1.4.1.159.1.1.3.2.1.9 counter read-only
                                 dupportFramesTooLong 1.3.6.1.4.1.159.1.1.3.2.1.10 counter read-only
                                 dupportAutoPartitionCount 1.3.6.1.4.1.159.1.1.3.2.1.11 counter read-only
                     duphmAddrTrackCapability 1.3.6.1.4.1.159.1.1.4
                         duphmAddrTrackPortTable 1.3.6.1.4.1.159.1.1.4.1 no-access
                             duphmAddrTrackPortEntry 1.3.6.1.4.1.159.1.1.4.1.1 no-access
                                 dupportHubAddrID 1.3.6.1.4.1.159.1.1.4.1.1.1 integer read-only
                                 dupportGroupAddrID 1.3.6.1.4.1.159.1.1.4.1.1.2 integer read-only
                                 dupportAddrID 1.3.6.1.4.1.159.1.1.4.1.1.3 integer read-only
                                 dupportLastSourceAddress 1.3.6.1.4.1.159.1.1.4.1.1.4 octet string read-only
                                 dupportSourceAddrChanges 1.3.6.1.4.1.159.1.1.4.1.1.5 counter read-only
             products 1.3.6.1.4.1.159.2
                 paragon 1.3.6.1.4.1.159.2.1
                     pgBasicGroup 1.3.6.1.4.1.159.2.1.1
                         pgBasicChannelTable 1.3.6.1.4.1.159.2.1.1.1 no-access
Status and configuration information for a collection of channels in the Paragon system concentrator.
                             pgBasicChannelEntry 1.3.6.1.4.1.159.2.1.1.1.1 no-access
Status and configuration information for a particular channel in the Paragon system concentrator.
                                 pgChannelID 1.3.6.1.4.1.159.2.1.1.1.1.1 integer read-only
The value of the Paragon Channel ID is assigned so as to uniquely identify a channel in the Paragon system where a single agent manages multiple channels.
                                 pgChannelIPGCount 1.3.6.1.4.1.159.2.1.1.1.1.2 counter read-only
pgChannelIPGCount object counts the number of IPGs below the object pgMonRptrIPGThreshold, since agent reset.
                                 pgChannelIPGThreshold 1.3.6.1.4.1.159.2.1.1.1.1.3 counter read-write
This object can be set to trigger a proprietary Threshold Crossed Trap. The IPG Threshold is measured in bit times. (e.g. If the inter-packet gap is 9.6 us, this is equivalent to 96 bit times).
                                 pgChannelMinimumIPG 1.3.6.1.4.1.159.2.1.1.1.1.4 counter read-only
pgChannelMinimumIPG object identifies the lowest inter-packet gap value in bit times obtained for this repeater since the last agent reset.
                                 pgChannelStatus 1.3.6.1.4.1.159.2.1.1.1.1.5 integer read-write
The pgChannelStatus indicates whether the Paragon system agent can control/monitor the channel effectively. Enumeration: 'controllable': 1, 'manageable': 0.
                                 pgChannelNumOfCards 1.3.6.1.4.1.159.2.1.1.1.1.6 integer read-only
The pgChannelNumOfCards object identifies the number of groups currently in the Paragon system concentrator which can potentially connect to this channel. Note: A group is connected to a channel when at least one of its ports is connected to the channel.
                         pgBasicCardTable 1.3.6.1.4.1.159.2.1.1.2 no-access
Table of descriptive information about the groups of ports. This table will return the same information regardles of the pgCardChannelBasicID
                             pgBasicCardEntry 1.3.6.1.4.1.159.2.1.1.2.1 no-access
An entry in the table, containing information about a single group of ports.
                                 pgCardChannelBasicID 1.3.6.1.4.1.159.2.1.1.2.1.1 integer read-only
Channel ID for identifying the card.
                                 pgCardBasicID 1.3.6.1.4.1.159.2.1.1.2.1.2 integer read-only
A value unique within the Paragon system concentrator, where the slots are numbered from left to right.
                                 pgCardType 1.3.6.1.4.1.159.2.1.1.2.1.3 displaystring read-only
The pgCardType object is a text string that contains the product code for order entry purposes (e.g. EOM-0601).
                                 pgCardSize 1.3.6.1.4.1.159.2.1.1.2.1.4 integer read-only
The pgCardSize object indicates the number of slots the card occupies in the Paragon system concentrator.
                                 pgCardSerialID 1.3.6.1.4.1.159.2.1.1.2.1.5 displaystring read-only
The pgCardSerialID object contains a unique serial code.
                         pgBasicPortTable 1.3.6.1.4.1.159.2.1.1.3 no-access
Table of descriptive information about the ports.
                             pgBasicPortEntry 1.3.6.1.4.1.159.2.1.1.3.1 no-access
An entry in the table, containing information about a single port.
                                 pgPortChannelBasicID 1.3.6.1.4.1.159.2.1.1.3.1.1 integer read-only
Channel ID for identifying the port.
                                 pgPortCardBasicID 1.3.6.1.4.1.159.2.1.1.3.1.2 integer read-only
Card ID for identifying the port.
                                 pgPortBasicID 1.3.6.1.4.1.159.2.1.1.3.1.3 integer read-only
A value unique on the card indicating the port ID.
                                 pgPortMediaType 1.3.6.1.4.1.159.2.1.1.3.1.4 integer read-only
The pgPortMediaType object describes the port's media type. The ETM-1201-50 card will support either Shielded or Unshielded Twisted Pair through jumper selection. The pgPortMediaType will always return Twisted Pair since this selection is not manageable. Enumeration: 'not-Applicabl': 0, 'combined-Media-Types': 1, 'shielded-Twisted-Pair': 5, 'twisted-Pair': 3, 'nm850-Fiber-Optic': 2, 'unshielded-Twisted-Pair': 4, 'ohm50-Thin-Coax': 6, 'aUI-MAU': 8, 'aUI-DTE': 7.
                     pgAgentModuleGroup 1.3.6.1.4.1.159.2.1.2
                         pgAgentRevision 1.3.6.1.4.1.159.2.1.2.1
                             pgAgentRevLevels 1.3.6.1.4.1.159.2.1.2.1.1
                                 pgAgentSerialNum 1.3.6.1.4.1.159.2.1.2.1.1.1 displaystring read-only
The pgAgentSerialNum object contains a unique serial code for the agent module hardware.
                                 pgAgentSoftware 1.3.6.1.4.1.159.2.1.2.1.1.2 displaystring read-only
The pgAgentSoftware object contains the agent module's software revision level.
                                 pgAgentROM 1.3.6.1.4.1.159.2.1.2.1.1.3 displaystring read-only
The pgAgentROM object contains the agent module's ROM revision level.
                         pgAgentSerial 1.3.6.1.4.1.159.2.1.2.2
                             pgAgentSerialPort 1.3.6.1.4.1.159.2.1.2.2.1
                                 pgAgentFlowControl 1.3.6.1.4.1.159.2.1.2.2.1.1 integer read-write
The pgAgentFlowControl indicates whether the flow control for the serial port is enabled. Enumeration: 'disabled': 0, 'enabled': 1.
                                 pgAgentBaud 1.3.6.1.4.1.159.2.1.2.2.1.2 integer read-write
The pgAgentBaud indicates the baud rate for the agent module's serial port. Enumeration: 'bps300': 300, 'bps2400': 2400, 'bps9600': 9600, 'bps4800': 4800, 'bps1200': 1200, 'bps19200': 19200.
                                 pgAgentStopBits 1.3.6.1.4.1.159.2.1.2.2.1.3 integer read-write
The pgAgentStopBits object indicates the number of stop bits in use for the agent`s serial port.
                                 pgAgentParity 1.3.6.1.4.1.159.2.1.2.2.1.4 integer read-write
The pgAgentParity indicates the parity in use for the agent module's serial port. Enumeration: 'even': 1, 'none': 0, 'odd': 2.
                         pgAgentConf 1.3.6.1.4.1.159.2.1.2.3
                             pgAgentConfig 1.3.6.1.4.1.159.2.1.2.3.1
                                 pgAgentCommBandType 1.3.6.1.4.1.159.2.1.2.3.1.1 integer read-only
pgAgentCommBandType object indicates whether communication between the agent module and the pgAgentCurrentPrimary network management station is in-band or out-of-band. Enumeration: 'in-band': 0, 'out-of-band': 1.
                                 pgAgentTimeout 1.3.6.1.4.1.159.2.1.2.3.1.2 integer read-write
pgAgentTimeout object indicates the amount of time before an agent will search for a new NMS upon receiving no communication from the current NMS. A zero value inhibits the agent from ever searching for a new NMS.
                                 pgAgentDesignatedPrimary 1.3.6.1.4.1.159.2.1.2.3.1.3 ipaddress read-only
pgAgentDesignatedPrimary object identifies the network address of the 'Primary' network management station. The 'Primary' NMS is designated by the agent's download server.
                                 pgAgentLastAuthFail 1.3.6.1.4.1.159.2.1.2.3.1.4 ipaddress read-only
pgAgentLastAuthFail object identifies the last SNMP entity which caused the agent to issue a standard SNMP authentiction trap.
                                 pgAgentLastSecurityFail 1.3.6.1.4.1.159.2.1.2.3.1.5 ipaddress read-only
pgAgentLastSecurityFail object identifies the last SNMP entity which caused the agent to issue a proprietary Security Failure trap.
                                 pgAgentCurrentPrimary 1.3.6.1.4.1.159.2.1.2.3.1.6 ipaddress read-write
pgAgentCurrentPrimary object identifies the current 'Primary' network management station by network address. Note: this variable is only read-write for a SNMP Set-Request delivered from the pgAgentDesignatedPrimary.
                                 pgAgentDownloadServer 1.3.6.1.4.1.159.2.1.2.3.1.7 ipaddress read-only
pgAgentDownloadServer object identifies the download server station by network address.
                                 pgAgentLastSetRequest 1.3.6.1.4.1.159.2.1.2.3.1.8 ipaddress read-only
pgAgentLastSetRequest object identifies the last SNMP entity that sent a SET-REQUEST to the agent.
                                 pgAgentDipSwitches 1.3.6.1.4.1.159.2.1.2.3.1.9 octet string read-only
This octet string represents the current configuration of the agent's dipswitch settings, encoded as a bit string. Each dipswitch is represented by a single bit. When the value of a bit=1, it indicates that the dipswitch is set to the ON position. The number of octets is 2 to represent the 10 dipswitches. The first octet will encode the configuration of dipswitches 1-8, where 1 represents the Serial Port Access, 2 represents the Timeout Feature, and 3 represents the Security Feature,7 represents agent configuration, and 8 represents talking through a router. The rest of the dipswitches are currently not used.
                                 pgAgentNetPackAddr1 1.3.6.1.4.1.159.2.1.2.3.1.10 ipaddress read-only
pgAgentNetPackAddr1 object contains the network address for the NetPack1.
                                 pgAgentNetPackAddr2 1.3.6.1.4.1.159.2.1.2.3.1.11 ipaddress read-only
pgAgentNetPackAddr2 object contains the network address for the NetPack2.
                                 pgAgentNetPackAddr3 1.3.6.1.4.1.159.2.1.2.3.1.12 ipaddress read-only
pgAgentNetPackAddr3 object contains the network address for the NetPack3.
                                 pgAgentNetPackAddr4 1.3.6.1.4.1.159.2.1.2.3.1.13 ipaddress read-only
pgAgentNetPackAddr4 object contains the network address for the NetPack4.
                                 pgAgentNetPackAddr5 1.3.6.1.4.1.159.2.1.2.3.1.14 ipaddress read-only
pgAgentNetPackAddr5 object contains the network address for the NetPack5.
                                 pgAgentNetPackAddr6 1.3.6.1.4.1.159.2.1.2.3.1.15 ipaddress read-only
pgAgentNetPackAddr6 object contains the network address for the NetPack6.
                                 pgAgentLearnedNMSTable 1.3.6.1.4.1.159.2.1.2.3.1.16 no-access
Table of information about the network management stations which have communicated with the agent.
                                       pgAgentLearnedNMSEntry 1.3.6.1.4.1.159.2.1.2.3.1.16.1 no-access
An entry in the table, containing information about a network management station which has communicated with the agent.
                                           pgAgentLearnedNMSAddr 1.3.6.1.4.1.159.2.1.2.3.1.16.1.1 ipaddress read-only
pgAgentLearnedNMSAddr object identifies the address of the NMS which has communicated with this agent.
                                 pgAgentNetPackMACAddr1 1.3.6.1.4.1.159.2.1.2.3.1.17 octet string read-only
pgAgentNetPackMACAddr1 object contains the MAC address for the NetPack1.
                                 pgAgentNetPackMACAddr2 1.3.6.1.4.1.159.2.1.2.3.1.18 octet string read-only
pgAgentNetPackMACAddr2 object contains the MAC address for the NetPack2.
                                 pgAgentNetPackMACAddr3 1.3.6.1.4.1.159.2.1.2.3.1.19 octet string read-only
pgAgentNetPackMACAddr3 object contains the MAC address for the NetPack3.
                                 pgAgentNetPackMACAddr4 1.3.6.1.4.1.159.2.1.2.3.1.20 octet string read-only
pgAgentNetPackMACAddr4 object contains the MAC address for the NetPack4.
                                 pgAgentNetPackMACAddr5 1.3.6.1.4.1.159.2.1.2.3.1.21 octet string read-only
pgAgentNetPackMACAddr5 object contains the MAC address for the NetPack5.
                                 pgAgentNetPackMACAddr6 1.3.6.1.4.1.159.2.1.2.3.1.22 octet string read-only
pgAgentNetPackMACAddr6 object contains the MAC address for the NetPack6.
                                 pgAgentNetPackState1 1.3.6.1.4.1.159.2.1.2.3.1.23 integer read-only
pgAgentNetPackState1 object identifies the state of the NetPack1. Enumeration: 'nms-netpack': 3, 'monitoring': 2, 'notInstalled': 0, 'installed-not-in-use': 4, 'initializing': 1.
                                 pgAgentNetPackState2 1.3.6.1.4.1.159.2.1.2.3.1.24 integer read-only
pgAgentNetPackState2 object identifies the state of the NetPack2. Enumeration: 'nms-netpack': 3, 'monitoring': 2, 'notInstalled': 0, 'installed-not-in-use': 4, 'initializing': 1.
                                 pgAgentNetPackState3 1.3.6.1.4.1.159.2.1.2.3.1.25 integer read-only
pgAgentNetPackState3 object identifies the state of the NetPack3. Enumeration: 'nms-netpack': 3, 'monitoring': 2, 'notInstalled': 0, 'installed-not-in-use': 4, 'initializing': 1.
                                 pgAgentNetPackState4 1.3.6.1.4.1.159.2.1.2.3.1.26 integer read-only
pgAgentNetPackState4 object identifies the state of the NetPack4. Enumeration: 'nms-netpack': 3, 'monitoring': 2, 'notInstalled': 0, 'installed-not-in-use': 4, 'initializing': 1.
                                 pgAgentNetPackState5 1.3.6.1.4.1.159.2.1.2.3.1.27 integer read-only
pgAgentNetPackState5 object identifies the state of the NetPack5. Enumeration: 'nms-netpack': 3, 'monitoring': 2, 'notInstalled': 0, 'installed-not-in-use': 4, 'initializing': 1.
                                 pgAgentNetPackState6 1.3.6.1.4.1.159.2.1.2.3.1.28 integer read-only
pgAgentNetPackState6 object identifies the state of the NetPack6. Enumeration: 'nms-netpack': 3, 'monitoring': 2, 'notInstalled': 0, 'installed-not-in-use': 4, 'initializing': 1.
                                 pgAgentConfigChanges 1.3.6.1.4.1.159.2.1.2.3.1.29 integer read-only
Denotes whether a configuration change has been noted in the Concentrator after a power-up condition. This object is bound as part of the ColdStart Trap optional variables. Enumeration: 'no-Change': 0, 'change-Found': 1.
                         pgAgentStatus 1.3.6.1.4.1.159.2.1.2.4
                             pgAgentDaughterboard 1.3.6.1.4.1.159.2.1.2.4.1 integer read-only
Status condition for the Agent Module optional Daughterboard. Enumeration: 'fault': 3, 'notInstalled': 1, 'normal': 2.
                             pgAgentInternalBus 1.3.6.1.4.1.159.2.1.2.4.2 integer read-only
Status condition for the Agent Module MCI Bus Enumeration: 'fault': 3, 'reserved': 1, 'normal': 2.
                             pgAgentCorrelator 1.3.6.1.4.1.159.2.1.2.4.3 integer read-only
Status condition for the Agent Module Data Acquisition Foreground Process. Enumeration: 'mci-command-timeout': 5, 'cant-get-synch': 4, 'reserved': 1, 'pending-full': 7, 'normal': 2, 'amb-cant-send-response': 10, 'fault': 3, 'mci-timeout-error': 6, 'fore-out-of-buffers': 11, 'mci-error': 8, 'mw-out-of-range': 12, 'fbc-request-full': 9.
                             pgAgentNetPackStatus1 1.3.6.1.4.1.159.2.1.2.4.4 integer read-only
pgAgentNetPackStatus1 object indicates the current operational status of the Agent's NetPack. Enumeration: 'fault': 3, 'notInstalled': 1, 'normal': 2.
                             pgAgentNetPackStatus2 1.3.6.1.4.1.159.2.1.2.4.5 integer read-only
pgAgentNetPackStatus2 object indicates the current operational status of the Agent's NetPack. Enumeration: 'fault': 3, 'notInstalled': 1, 'normal': 2.
                             pgAgentNetPackStatus3 1.3.6.1.4.1.159.2.1.2.4.6 integer read-only
pgAgentNetPackStatus3 object indicates the current operational status of the Agent's NetPack. Enumeration: 'fault': 3, 'notInstalled': 1, 'normal': 2.
                             pgAgentNetPackStatus4 1.3.6.1.4.1.159.2.1.2.4.7 integer read-only
pgAgentNetPackStatus4 object indicates the current operational status of the Agent's NetPack. Enumeration: 'fault': 3, 'notInstalled': 1, 'normal': 2.
                             pgAgentNetPackStatus5 1.3.6.1.4.1.159.2.1.2.4.8 integer read-only
pgAgentNetPackStatus5 object indicates the current operational status of the Agent's NetPack. Enumeration: 'fault': 3, 'notInstalled': 1, 'normal': 2.
                             pgAgentNetPackStatus6 1.3.6.1.4.1.159.2.1.2.4.9 integer read-only
pgAgentNetPackStatus6 object indicates the current operational status of the Agent's NetPack. Enumeration: 'fault': 3, 'notInstalled': 1, 'normal': 2.
                     pgMonitorGroup 1.3.6.1.4.1.159.2.1.3
                         pgMonitorRptrTable 1.3.6.1.4.1.159.2.1.3.1 no-access
Statistics for the current functioning repeater in the concentrator.
                             pgMonitorRptrEntry 1.3.6.1.4.1.159.2.1.3.1.1 no-access
Entry for the current functioning repeater in the concentrator.
                                 pgMonRptrID 1.3.6.1.4.1.159.2.1.3.1.1.1 integer read-only
pgMonRptrID identifies the repeaterfor which this entry contains monitor information.
                                 pgMonRptrTotalFrames 1.3.6.1.4.1.159.2.1.3.1.1.2 counter read-only
pgMonRptrTotalFrames counts the total number of frames that have been received by the repeater, including error prone packets.
                                 pgMonRptrTotalReadFrames 1.3.6.1.4.1.159.2.1.3.1.1.3 counter read-only
pgMonRptrTotalReadFrames counts the total number of frames that have valid frame length and no FCS Errors.
                                 pgMonRptrTotalFCSErrs 1.3.6.1.4.1.159.2.1.3.1.1.4 counter read-only
pgMonRptrTotalFCSErrs counts the total number of frames that have FCS Errors and no Framing Errors. The frame size must also be greater than or equal to 64 octets and less than or equal to 1518 octets.
                                 pgMonRptrTotalAlignmentErrs 1.3.6.1.4.1.159.2.1.3.1.1.5 counter read-only
pgMonRptrTotalAlignmentErrs counts the total number of frames that have both FCS Errors and Framing Errors. The frame size must also be greater than or equal to 64 octets and less than or equal to 1518 octets.
                                 pgMonRptrTotalRunts 1.3.6.1.4.1.159.2.1.3.1.1.6 counter read-only
pgMonRptrTotalRunts counts the total number of collision fragments with runt errors (frames longer than 74 bits and less than 512 bits).
                                 pgMonRptrTotalLateColl 1.3.6.1.4.1.159.2.1.3.1.1.7 counter read-only
pgMonRptrTotalLateColl counts the total number of collision fragments with size longer than 512 bits.
                                 pgMonRptrTotalShortEvents 1.3.6.1.4.1.159.2.1.3.1.1.8 counter read-only
pgMonRptrTotalShortEvents of fragments received by the repeater that are less than 74 bits in length.
                                 pgMonRptrMPRStatus 1.3.6.1.4.1.159.2.1.3.1.1.9 integer read-only
pgMonRptrMPRStatus indicates the current status of the MPR. It will display the value of Normal when the MPR is not experiencing one of the error conditions. If more than one of the error conditions is present in close succession, a pgMPRErrors trap will be sent for each of the error conditions noted. pgMonRptrMPRStatus will hold the value of the most recent status. Enumeration: 'normal': 1, 'timed-Out-Reset': 5, 'mJLP-Activated': 4, 'other': 6, 'fIFO-Overflowed': 3, 'fIFO-Underrun': 2.
                                 pgMonRptrMPRMJLPCount 1.3.6.1.4.1.159.2.1.3.1.1.10 counter read-only
pgMonRptrMPRMJLPCount indicates the number of times the MAU Jabber Lockup Protection (MJLP) has been activated. This variable counts how many times the MPR has noted jabbering on a port and has initiated its MJLP feature to control this jabbering. After a port has sent 50 milliseconds of constant data, the MJLP feature will interrupt a port and stop data from being sent on that port for 10 microseconds.
                         pgMonitorPortTable 1.3.6.1.4.1.159.2.1.3.2 no-access
Table of statistical information about the monitored ports.
                             pgMonitorPortEntry 1.3.6.1.4.1.159.2.1.3.2.1 no-access
An entry in the pgMonitorPortTable, containing statistical information about a single port.
                                 pgMonPortRptrID 1.3.6.1.4.1.159.2.1.3.2.1.1 integer read-only
Repeater ID for the specified port.
                                 pgMonPortCardID 1.3.6.1.4.1.159.2.1.3.2.1.2 integer read-only
Card ID for the specified port.
                                 pgMonPortID 1.3.6.1.4.1.159.2.1.3.2.1.3 integer read-only
A value unique to the card indicating the port ID.
                                 pgMonPortTotalFrames 1.3.6.1.4.1.159.2.1.3.2.1.4 counter read-only
pgMonPortTotalFrames is a count of the number of frames that have been received by the port, including error prone packets.
                                 pgMonPortTotalCollisions 1.3.6.1.4.1.159.2.1.3.2.1.5 counter read-only
pgMonPortTotalCollisions is a count of the number of fragments that have size less than 512 bits.
                                 pgMonPortCollRate 1.3.6.1.4.1.159.2.1.3.2.1.6 integer read-only
pgMonPortCollRate is a calculation of the total number of collisions for the last second divided by the frames received (pgMonPortTotalFrames) for the last second. This value is expressed in tenths of a percent.
                                 pgMonPortCollThreshold 1.3.6.1.4.1.159.2.1.3.2.1.7 integer read-write
pgMonPortCollThreshold is the threshold value for collision rate in percent which, if reached, causes a proprietary trap notification to be sent to the NMS.
                                 pgMonPortLateCollisions 1.3.6.1.4.1.159.2.1.3.2.1.8 counter read-only
pgMonPortLateCollisions is the count of collisions which occured after 512 bit times.
                                 pgMonPortErrorRate 1.3.6.1.4.1.159.2.1.3.2.1.9 integer read-only
pgMonPortErrorRate is a calculation of the total number of errors (FCS, Alignment, Short Events, Frames Too Long) for the last second divided by the frames received (pgMonPortTotalFrames) for the last second. This value is expressed in tenths of a percent.
                                 pgMonPortErrorThreshold 1.3.6.1.4.1.159.2.1.3.2.1.10 integer read-write
pgMonPortErrorThreshold is the threshold value for error rate in percent which, if reached, causes a proprietary trap notification to be sent to the NMS.
                                 pgMonPortOutOfRange 1.3.6.1.4.1.159.2.1.3.2.1.11 counter read-only
pgMonPortOutOfRange is count of frames which are noted as having their size out of the range for good frames. That is either greater than 1518 octets or less than 64 octets.
                                 pgMonPortCollHysteresis 1.3.6.1.4.1.159.2.1.3.2.1.12 integer read-write
pgMonPortCollHysteresis is the hysteresis value for the collision rate in percent which if crossed (after a Threshold cross) causes a proprietary trap notification to be sent to the NMS.
                                 pgMonPortErrorHysteresis 1.3.6.1.4.1.159.2.1.3.2.1.13 integer read-write
pgMonPortErrorHysteresis is the hysteresis value for the error rate in percent which if crossed (after a Threshold cross) causes a proprietary trap notification to be sent to the NMS.
                                 pgMonPortLinkStatus 1.3.6.1.4.1.159.2.1.3.2.1.14 integer read-only
pgMonPortLinkStatus indicates whether the port state is link pass or link fail. This status is applicable to the following cards: Ethernet Twisted Pair, Ethernet Optical Module. Ports on other cards will report Not-Applicable for this status. Enumeration: 'link-Fail-State': 3, 'not-Applicable': 1, 'link-Pass-State': 2.
                                 pgMonPortJabberStatus 1.3.6.1.4.1.159.2.1.3.2.1.15 integer read-only
pgMonPortJabberStatus indicates whether the port is currently jabbering or not. This status is applicable to the following cards: Ethernet Twisted Pair, Ethernet Optical Module. Ports on other cards will report Not-Applicable for this status. Enumeration: 'non-Jabber-State': 2, 'jabber-State': 3, 'not-Applicable': 1.
                                 pgMonPortTransmitCollisions 1.3.6.1.4.1.159.2.1.3.2.1.16 counter read-only
pgMonPortTransmitCollisions is incremented each time a port transmits and receives data simultaneously or two ports receive data simultaneously.
                     pgConcentratorGroup 1.3.6.1.4.1.159.2.1.4
                         pgConcentrator 1.3.6.1.4.1.159.2.1.4.1
                             pgConcentratorInfo 1.3.6.1.4.1.159.2.1.4.1.1
                                 pgConcModel 1.3.6.1.4.1.159.2.1.4.1.1.1 displaystring read-only
pgConcModel is the model number of the concentrator for order entry purposes.
                                 pgConcSerialNumber 1.3.6.1.4.1.159.2.1.4.1.1.2 displaystring read-only
pgConcSerialNumber is the serial number of the concentrator.
                                 pgConcTemperature 1.3.6.1.4.1.159.2.1.4.1.1.3 integer read-only
pgConcTemperature indicates operating temperature state for the concentrator. Enumeration: 'normal': 0, 'overTemperature': 1.
                                 pgConcPowerSupply 1.3.6.1.4.1.159.2.1.4.1.1.4 integer read-only
pgConcPowerSupply indicates dual-redundant power supply status for the concentrator. Enumeration: 'powerSupply1Fault': 2, 'powerSupplysOK': 3, 'powerSupply2Fault': 1.
                     pgActionGroup 1.3.6.1.4.1.159.2.1.5
                         pgActionSys 1.3.6.1.4.1.159.2.1.5.1
                             pgActionSystem 1.3.6.1.4.1.159.2.1.5.1.1
                                 pgWarmStartReset 1.3.6.1.4.1.159.2.1.5.1.1.1 integer read-write
pgWarmStartReset is an action requesting a warm start of the concentrator system. All counters are cleared for all Hubs and a Warm Start Trap is issued to the NMS. Enumeration: 'reset': 1, 'no-reset': 0.
                                 pgColdStartReset 1.3.6.1.4.1.159.2.1.5.1.1.2 integer read-write
pgColdStartReset is an action requesting a cold start of the concentrator system. If the value is resetWithCurrentConfig then all counters are cleared for all Hubs with the concentrator configuration kept intact. If the value is resetWithDefaultConfig then all counters are cleared for all Hubs with the concentrator configuration reset to default values. All Repeaters are reset and a Cold Start Trap is issued to the NMS. Enumeration: 'resetWithCurrentConfig': 1, 'no-reset': 0, 'resetWithDefaultConfig': 2.
                                 pgNetPackSelftest 1.3.6.1.4.1.159.2.1.5.1.1.3 integer read-write
pgNetPackSelftest is an action requesting the Selftest of any one of the system NetPacks. Enumeration: 'testNetPack6': 5, 'testNetPack4': 3, 'testNetPack5': 4, 'testNetPack2': 1, 'testNetPack3': 2, 'testNetPack1': 0.
                                 pgReturnToPrimaryMS 1.3.6.1.4.1.159.2.1.5.1.1.4 integer read-write
pgReturnToPrimaryMS is an action requesting the return of the Agent to the specified primary channel for communication to its primary NMS. Enumeration: 'no-return': 0, 'return': 1.
                                 pgHubColdReset 1.3.6.1.4.1.159.2.1.5.1.1.5 integer read-write
pgHubColdReset is an action requesting the clearing of all counters and statistics for the specified Hub. Enumeration: 'no-reset': 0, 'resetHub2': 2, 'resetHub1': 1.
                                 pgHubWarmReset 1.3.6.1.4.1.159.2.1.5.1.1.6 integer read-write
pgHubWarmReset is an action requesting the Reset of counters for the specified Hub in the System, without any affect on the configuration. The MPR for the specified Hub will not be reset. Enumeration: 'no-reset': 0, 'resetHub2': 2, 'resetHub1': 1.
               pgSetSuccess 1.3.6.1.4.1.1590.100
The pgSetSuccess trap is generated by the agent upon the successful completion of a Set Request that set the value of the dupportadminState variable. This response is not to be confused with the Get Response message which is automatically generated by the agent in response to a Set Request. This trap is used to verify at the Management Station that Set Requests which require reliance on external hardware have completed successfully. It is also designed to notify other management stations monitoring the agent that a Set Request has successfully occurred and the concentrator configuration should be appropriately updated.
               pgSetFailure 1.3.6.1.4.1.1590.200
The pgSetFailure trap is generated by the agent upon the unsuccessful completion of an unsuccessful Set Request that attempted to set the value of the dupportadminState variable. This response is not to be confused with the Get Response message which is automatically generated by the agent in response to a Set Request. This trap is used to notify the Management Station of the failure of a Set Request which has already sent a Get Response reply to the Management Station.
               pgThresholdCrossed 1.3.6.1.4.1.1590.300
The pgThresholdCrossed trap is generated by the agent upon recognition of a threshold being crossed as defined by the user. The variables sent in the trap are first the rate of the variable whose threshold has crossed and second the threshold that has been crossed. These two variables must be present for this trap to process correctly. Allowable variable combinations are pgChannelIPGCount and pgChannelIPGThreshold, pgMonPortCollRate and pgMonPortCollThreshold, and pgMonPortErrorRate and pgMonPortErrorThreshold.
               pgHysteresisCrossed 1.3.6.1.4.1.1590.400
The pgHysteresisCrossed trap is generated by the agent upon recognition of a hysteresis value being crossed as defined by the user. The trap is sent to notify the management station that the variable has recovered from the condition that caused the pgThresholdCrossed trap to occur. This trap will always be preceded by a pgThresholdCrossed trap. The variables sent in the trap are first the rate of the variable whose hysteresis value has crossed and second the hysteresis value that has been crossed. These two variables must be present for this trap to process correctly. Allowable variable combinations are pgMonPortCollRate and pgMonPortCollHysteresis, and pgMonPortErrorRate and pgMonPortErrorHysteresis.
               pgGroupMapChange 1.3.6.1.4.1.1590.600
This trap is generated upon recognition of a change in the group map as described in IEEE 802.3 Hub Management Specification. The trap is sent when a change occurs in the concentrator's group map, resulting from the insertion or removal of a card from a concentrator.
               pgSelfTestResults 1.3.6.1.4.1.1590.700
The pgSelfTestResults trap is generated upon finding that a command request for a selftest has completed execution. This trap is issued on completion of a self test requested by a Set Request. The variables in this trap include the statuses of the object or objects that performed selftests and their current values. There must be at least one variable for this trap to process correctly, and there may be multiple variables. Allowable variables are pgAgentDaughterboard, pgAgentInternalBus, pgAgentCorrelator, pgAgentNetPackStatus1, pgAgentNetPackStatus2, pgAgentNetPackStatus3, pgAgentNetPackStatus4, pgAgentNetPackStatus5,and pgAgentNetPackStatus6.
               pgDaughterboardTimeout 1.3.6.1.4.1.1590.800
The pgDaughterboardTimeout trap is sent if the communication between the Agent Module and the Daughterboard has ceased. This trap may only be sent if the Daughterboard is installed on the Agent Module.
               pgInternalBusTimeout 1.3.6.1.4.1.1590.900
The pgInternalBusTimeout trap is sent if the communication between the Agent Module Foreground and the Internal Bus has timed out. This trap denotes a hardware failure.
               pgInternalBusHardwareError 1.3.6.1.4.1.1590.1000
The pgInternalBusHardwareError trap is sent if the response received from the Internal Bus does not match the expected response. The receipt of this trap signifies an Internal Bus hardware failure.
               pgOverTemperature 1.3.6.1.4.1.1590.1100
The pgOverTemperature trap is generated upon finding that an Over Temperature condition has been reported by the temperature sensing mechanism in the Agent Module.
               pgPowerSupplyFailure 1.3.6.1.4.1.1590.1200
The pgPowerSupplyFailure trap is generated upon finding that a failure has been noted in one of the Dual-Redundant Power Supplies as reported by the Agent Module power supply sensing mechanism.
               pgErrorCondition 1.3.6.1.4.1.1590.1300
The pgErrorCondition trap is generated upon finding that an error condition has occurred in the Agent Module. The variables in this trap include the object or objects that were involved in the error and their error statuses. There must be at least one variable for this trap to process correctly, and there may be multiple variables. Allowable variables are pgAgentDaughterboard, pgAgentInternalBus, pgAgentCorrelator, pgAgentSerialPrt, pgAgentNetPackStatus1, pgAgentNetPackStatus2, pgAgentNetPackStatus3, pgAgentNetPackStatus4, pgAgentNetPackStatus5,and pgAgentNetPackStatus6.
               pgSecurityViolation 1.3.6.1.4.1.1590.1400
The pgSecurityViolation trap is generated upon finding that a security violation has occurred. This proprietary security mechanism is fully explained in the Agent Module User's Manual.
               pgHubHealth 1.3.6.1.4.1.1590.1500
The pgHubHealth trap is generated upon finding that the health of the concentrator or some element in it has changed. The value of duphubHealthData and the corresponding text in duphubHealthText notify the management station of the specific change that has occurred. Depending on the change and the corresponding values of duphubHealthData and duphubHealthText the fourth variable will be either dupportAdminState or duphubAutoPartitionState. This fourth variable provides additional information to the management station about the change in the system that was noted.
               pgLinkStatus 1.3.6.1.4.1.1590.1600
The pgLinkStatus is generated by the agent upon finding that the link status of a port has changed. The variable pgMonPortLinkStatus will hold the current link status of the port identified by the instance.
               pgMPRErrors 1.3.6.1.4.1.1590.1700
The pgMPRErrors trap is generated by the agent to notify the Management Station that the MPR is experiencing an error condition. The variable pgMonGroupMPRStatus indicates the error condition.