PANA-EP-MIB: View SNMP OID List / Download MIB

VENDOR: INTERNET-STANDARD


 Home MIB: PANA-EP-MIB
Download as:   
SNMPv2-CONF, IF-MIB, SNMPv2-SMI, SNMPv2-TC, IPSEC-SPD-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 panaMIB 1.3.6.1.2.1.153.1
The MIB module for defining additional PANA-specific objects to the IPsec SPD MIB. Copyright (C) The Internet Society (2003). This version of this MIB module is part of RFC XXXX, see the RFC itself for full legal notices.
     panaConfigObjects 1.3.6.1.2.1.153.1.1
         panaL2FilterTable 1.3.6.1.2.1.153.1.1.1 no-access
Link-layer filter definitions.
             panaL2FilterEntry 1.3.6.1.2.1.153.1.1.1.1 no-access
An entry in the Link-layer filter table.
                 panaL2FiltEpIfIndex 1.3.6.1.2.1.153.1.1.1.1.1 interfaceindex read-only
The index identifying the EP interface where the filter policy must be enforced on.
                 panaL2FiltAddr 1.3.6.1.2.1.153.1.1.1.1.2 physaddress read-only
The authorized device Link-layer address (DI). For example, for a 802.x interface, this object normally contains a MAC address. For interfaces which do not have such an address (e.g., a serial line), this object should contain an octet string of zero length.
                 panaL2FiltPmk 1.3.6.1.2.1.153.1.1.1.1.3 panakey read-only
This is PMK (Pairwise Master Key) used for bootstraping link-layer ciphers.
                 panaL2FiltPmkName 1.3.6.1.2.1.153.1.1.1.1.4 panakeyname read-only
This is the name of the panaL2Pmk.
                 panaL2FiltPmkLifetime 1.3.6.1.2.1.153.1.1.1.1.5 timeinterval read-only
This is the lifetime of panaL2Pmk.
                 panaL2FiltLastChanged 1.3.6.1.2.1.153.1.1.1.1.6 timestamp read-only
The value of sysUpTime when this row was last modified or created either through SNMP SETs or by some other external means.
                 panaL2FiltStorageType 1.3.6.1.2.1.153.1.1.1.1.7 storagetype read-only
The storage type for this row. Rows in this table which were created through an external process may have a storage type of readOnly or permanent.
                 panaL2FiltRowStatus 1.3.6.1.2.1.153.1.1.1.1.8 rowstatus read-only
This object indicates the conceptual status of this row.
     panaNotificationObjects 1.3.6.1.2.1.153.1.2
         panaNotifications 1.3.6.1.2.1.153.1.2.0
             panaNewPacNotification 1.3.6.1.2.1.153.1.2.0.1
Notification that EP detected traffic coming from an unauthorized source. When source and destination IP addresses of the traffic is unknown, spdIPSourceType and spdIPDestinationType must be zero. When source L2 address of the traffic is unknown, panaL2SourceAddress must be zero.Notification that EP detected traffic coming from an unauthorized source.
         panaNotificationVariables 1.3.6.1.2.1.153.1.2.1
             panaEpIfIndex 1.3.6.1.2.1.153.1.2.1.1 interfaceindex no-access
Contains the interface index on which the packet triggered the notification in question.
             panaL2SourceAddress 1.3.6.1.2.1.153.1.2.1.2 physaddress no-access
Contains the source Link layer address of the packet which triggered the notification in question. For example, for a 802.x frame, this object normally contains a MAC address. For interfaces which do not have such an address (e.g., a serial line), this object should contain an octet string of zero length.
     panaConformanceObjects 1.3.6.1.2.1.153.1.3
         panaGroups 1.3.6.1.2.1.153.1.3.1
             panaL2FilterGroup 1.3.6.1.2.1.153.1.3.1.1
The Link-layer Filter Group.
             panaNewPacNotificationObjectsGroup 1.3.6.1.2.1.153.1.3.1.2
PaC Presence Notification Objects Group.
             panaNewPacNotificationGroup 1.3.6.1.2.1.153.1.3.1.3
PaC Presence Notification Group.
         panaCompliances 1.3.6.1.2.1.153.1.3.2
             panaFilterCompliance 1.3.6.1.2.1.153.1.3.2.1
The compliance statement for SNMP entities that support PANA DI-based filtering.
             panaNewPacNotificationCompliance 1.3.6.1.2.1.153.1.3.2.2
The compliance statement for SNMP entities that support new PaC presence Notification.