PAIRGAIN-SDSL-MIB: View SNMP OID List / Download MIB

VENDOR: PAIRGAIN TECHNOLOGIES


 Home MIB: PAIRGAIN-SDSL-MIB
Download as:   

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 pgsdslMIB 1.3.6.1.4.1.927.1.13.1
The module defines the SDSL MIB
     sdslMibObjects 1.3.6.1.4.1.927.1.13.1.1
         sdsl15mPerformanceTable 1.3.6.1.4.1.927.1.13.1.1.1 no-access
This table provides the 15-minute performance history monitoring of the last 24 hours for all SDSL Errored Seconds (ES), and Unavailable Seconds (UAS).
             sdsl15mPerformanceEntry 1.3.6.1.4.1.927.1.13.1.1.1.1 no-access
Entries of the SDSL 15-min performance table. All 96 entries for a 24 hour period are zeroed out and available at power up. Not all of the returned values are legitimate until the appropriate amount of time has elapsed.
                 sdsl15mHistoryId 1.3.6.1.4.1.927.1.13.1.1.1.1.1 short read-only
Identifies the history ID within the 96 15-minute performance history.
                 sdsl15mESNet 1.3.6.1.4.1.927.1.13.1.1.1.1.2 short read-only
SDSL 15-min ES count on Network side of the span.
                 sdsl15mUASNet 1.3.6.1.4.1.927.1.13.1.1.1.1.3 short read-only
SDSL 15-min UAS count on Network side of the span.
                 sdsl15mESCust 1.3.6.1.4.1.927.1.13.1.1.1.1.4 short read-only
SDSL 15-min ES count on the Customer side of the span.
                 sdsl15mUASCust 1.3.6.1.4.1.927.1.13.1.1.1.1.5 short read-only
SDSL 15-min UAS count on the Customer side of the span.
         sdsl24hPerformanceTable 1.3.6.1.4.1.927.1.13.1.1.2 no-access
This table provides 24-hour performance history monitoring of the last 7 days for all SDSL Errored Seconds (ES), and Unavailable Seconds (UAS). All 7 entries for the 7-day history are zeroed out and available at power up. Not all of the returned values are legitimate until the appropriate number of days has elapsed.
             sdsl24hPerformanceEntry 1.3.6.1.4.1.927.1.13.1.1.2.1 no-access
Entries of the SDSL 24-hour performance table
                 sdsl24hHistoryId 1.3.6.1.4.1.927.1.13.1.1.2.1.1 short read-only
Identify the history ID within the 7 24-hour performance history.
                 sdsl24hESNet 1.3.6.1.4.1.927.1.13.1.1.2.1.2 short read-only
SDSL 24-hour ES count on the Network side of the span.
                 sdsl24hUASNet 1.3.6.1.4.1.927.1.13.1.1.2.1.3 short read-only
SDSL 24-hour UAS count on the Network side of the span.
                 sdsl24hESCust 1.3.6.1.4.1.927.1.13.1.1.2.1.4 short read-only
SDSL 24-hour ES count on the Customer side of the span.
                 sdsl24hUASCust 1.3.6.1.4.1.927.1.13.1.1.2.1.5 short read-only
SDSL 24-hour UAS count on the Customer side of the span.
         sdslCurr24hPerformanceTable 1.3.6.1.4.1.927.1.13.1.1.3 no-access
This table provides the current 24-hour performance history monitoring for all SDSL Errored Seconds (ES), and Unavailable Seconds (UAS).
             sdslCurr24hPerformanceEntry 1.3.6.1.4.1.927.1.13.1.1.3.1 no-access
Entries of the SDSL Current 24-hour PM counts table
                 sdslCurr24hESNet 1.3.6.1.4.1.927.1.13.1.1.3.1.1 short read-only
SDSL Current 24-hour ES count on the Network side of the span.
                 sdslCurr24hUASNet 1.3.6.1.4.1.927.1.13.1.1.3.1.2 short read-only
SDSL 24-hour UAS count on the Network side of the span.
                 sdslCurr24hESCust 1.3.6.1.4.1.927.1.13.1.1.3.1.3 short read-only
SDSL 24-hour ES count on the Customer side of the span.
                 sdslCurr24hUASCust 1.3.6.1.4.1.927.1.13.1.1.3.1.4 short read-only
SDSL 24-hour UAS count on the Customer side of the span.
         sdslStatisticsTable 1.3.6.1.4.1.927.1.13.1.1.4 no-access
This table lists statistics for margin, and pulse attenuation, of the SDSL loop.
             sdslStatisticsEntry 1.3.6.1.4.1.927.1.13.1.1.4.1 no-access
Entries of the SDSL line statistics table
                 sdslTipRingReversal 1.3.6.1.4.1.927.1.13.1.1.4.1.1 byte read-only
Current TIP/RING state on the SDSL span: 0 - TIP/RING is not reversed. 1 - TIP/RING is reversed.
                 sdslUpState 1.3.6.1.4.1.927.1.13.1.1.4.1.2 byte read-only
Current loop state of the span: 0 - loop is up. 1 - loop is acquiring/converging. 2 - loop is signaling.
                 sdslMarginNet 1.3.6.1.4.1.927.1.13.1.1.4.1.3 byte read-only
Current Margin on the Network side of the span.
                 sdslMarginHighNet 1.3.6.1.4.1.927.1.13.1.1.4.1.4 byte read-only
Highest Margin on the Network side of the span.
                 sdslMarginLowNet 1.3.6.1.4.1.927.1.13.1.1.4.1.5 byte read-only
Lowest Margin on the Network side of the span.
                 sdslPulseAttenuationNet 1.3.6.1.4.1.927.1.13.1.1.4.1.6 byte read-only
Pulse Attenuation on the Network side of the span.
                 sdslMarginCust 1.3.6.1.4.1.927.1.13.1.1.4.1.7 byte read-only
Current Margin on the Customer side of the span.
                 sdslMarginHighCust 1.3.6.1.4.1.927.1.13.1.1.4.1.8 byte read-only
Highest Margin on the Customer side of the span.
                 sdslMarginLowCust 1.3.6.1.4.1.927.1.13.1.1.4.1.9 byte read-only
Lowest Margin on the Customer side of the span.
                 sdslPulseAttenuationCust 1.3.6.1.4.1.927.1.13.1.1.4.1.10 byte read-only
Pulse Attenuation on the Customer side of the span.
         sdslLineTable 1.3.6.1.4.1.927.1.13.1.1.5 no-access
This table lists which Profiles (located at the AMC) are assigned to the particular SDSL Line.
             sdslLineEntry 1.3.6.1.4.1.927.1.13.1.1.5.1 no-access
Entries of the SDSL line table
                 sdslLineConfProfile 1.3.6.1.4.1.927.1.13.1.1.5.1.1 sdsllineprofiletype read-write
The value of this object identifies the row in the SDSL Line Configuration Profile Table, (sdslLineConfProfileTable), which applies for this SDSL line. The Profiles are stored on the Management card. In the case which the configuration profile has not been set, the value will be set to '0'.
                 sdslLineAlarmConfProfile 1.3.6.1.4.1.927.1.13.1.1.5.1.2 sdsllineprofiletype read-write
The value of this object identifies the row in the SDSL Line Alarm Configuration Profile Table, (sdslLineAlarmConfProfileTable), which applies for this SDSL line. In the case which the configuration profile has not been set, the value will be set to '0'.
         sdslAlarmTable 1.3.6.1.4.1.927.1.13.1.1.6 no-access
This table provides the SDSL alarms indication.
             sdslAlarmEntry 1.3.6.1.4.1.927.1.13.1.1.6.1 no-access
Entries of the SDSL span alarm table
                 sdslMarginAlarmNet 1.3.6.1.4.1.927.1.13.1.1.6.1.1 byte read-only
Margin Threshold Exceeded on the Network side of the span.
                 sdslESAlarmNet 1.3.6.1.4.1.927.1.13.1.1.6.1.2 byte read-only
Errored Seconds threshold exceeded on the Network side of the span.
                 sdslUASAlarmNet 1.3.6.1.4.1.927.1.13.1.1.6.1.3 byte read-only
Unavailable Seconds threshold exceeded on the Network side of the span.
                 sdslMarginAlarmCust 1.3.6.1.4.1.927.1.13.1.1.6.1.4 byte read-only
Margin Threshold Exceeded on the Customer side of the span.
                 sdslESAlarmCust 1.3.6.1.4.1.927.1.13.1.1.6.1.5 byte read-only
Errored Seconds Exceeded on the Customer side of the span.
                 sdslUASAlarmCust 1.3.6.1.4.1.927.1.13.1.1.6.1.6 byte read-only
Unavailable Seconds threshold exceeded on the customer side of the span.
                 sdslLOSWAlarm 1.3.6.1.4.1.927.1.13.1.1.6.1.7 byte read-only
Loss of Sync Word (LOSW) occurred on the Network side of the SDSL loop.
         sdslAlarmHistoryTable 1.3.6.1.4.1.927.1.13.1.1.7 no-access
This table provides the SDSL alarms history
             sdslAlarmHistoryEntry 1.3.6.1.4.1.927.1.13.1.1.7.1 no-access
Entries of the SDSL Alarm History table
                 sdslMarginAlarmFirst 1.3.6.1.4.1.927.1.13.1.1.7.1.1 pgsdsltimestamp read-only
Date and time Margin threshold exceeded alarm first occurred
                 sdslMarginAlarmLast 1.3.6.1.4.1.927.1.13.1.1.7.1.2 pgsdsltimestamp read-only
Date and time Margin threshold exceeded alarm last occurred
                 sdslMarginAlarmCount 1.3.6.1.4.1.927.1.13.1.1.7.1.3 short read-only
The number of times the Margin threshold exceeded alarm has occurred
                 sdslESAlarmFirst 1.3.6.1.4.1.927.1.13.1.1.7.1.4 pgsdsltimestamp read-only
Date and time Errored Seconds threshold exceeded alarm first occurred
                 sdslESAlarmLast 1.3.6.1.4.1.927.1.13.1.1.7.1.5 pgsdsltimestamp read-only
Date and time Errored Seconds threshold exceeded alarm last occurred
                 sdslESAlarmCount 1.3.6.1.4.1.927.1.13.1.1.7.1.6 short read-only
The number of times the Errored Seconds threshold exceeded alarm has occurred
                 sdslUASAlarmFirst 1.3.6.1.4.1.927.1.13.1.1.7.1.7 pgsdsltimestamp read-only
Date and time Unavailable Seconds threshold exceeded alarm occurred
                 sdslUASAlarmLast 1.3.6.1.4.1.927.1.13.1.1.7.1.8 pgsdsltimestamp read-only
Date and time Unavailable Seconds threshold exceeded alarm last occurred
                 sdslUASAlarmCount 1.3.6.1.4.1.927.1.13.1.1.7.1.9 short read-only
The number of times the Unavailable Seconds threshold exceeded alarm has occurred
                 sdslLOSWAlarmFirst 1.3.6.1.4.1.927.1.13.1.1.7.1.10 pgsdsltimestamp read-only
Date and time the Loss of Sync Word alarm first occurred
                 sdslLOSWAlarmLast 1.3.6.1.4.1.927.1.13.1.1.7.1.11 pgsdsltimestamp read-only
Date and time the Loss of Sync Word alarm last occurred
                 sdslLOSWAlarmCount 1.3.6.1.4.1.927.1.13.1.1.7.1.12 short read-only
The number of times the Loss of Sync Word alarm has occurred.
         sdslLineConfProfileIndexNext 1.3.6.1.4.1.927.1.13.1.1.8 integer read-only
This object contains an appropriate value to be used for sdslLineConfProfileIndex when creating entries in the sdslLineConfProfileTable. The value '0' indicates that no unassigned entries are available. To obtain the sdslLineConfProfileIndexNext value for a new entry, the manager issues a management protocol retrieval operation to obtain the current value of this object. After each retrieval, the agent should modify the value to the next unassigned index. If the implementator of this MIB has choosen not to implement 'dynamic assignment' of profiles, this object is not useful and should return noSuchName upon SNMP request.
         sdslLineConfProfileTable 1.3.6.1.4.1.927.1.13.1.1.9 no-access
This table contains information on the sdsl line configuration. One entry in this table reflects a profile defined by a manager which can be used to configure the sdsl line.
             sdslLineConfProfileEntry 1.3.6.1.4.1.927.1.13.1.1.9.1 no-access
Each entry consists of a list of parameters that represents the configuration of an sdsl port. A profile is created in one step with all necessary parameter values and sdslLineProfileRowStatus set to createAndGo. This RowStatus object is also used to delete destroy profiles.
                 sdslLineConfProfileIndex 1.3.6.1.4.1.927.1.13.1.1.9.1.1 sdsllineprofiletype no-access
This object is used by the line configuration table in order to identify a row of this table
                 sdslRateMode 1.3.6.1.4.1.927.1.13.1.1.9.1.2 integer read-write
Rate Mode defined in Rate Selective/Adaptive Specification for SDSL Products. Mode 1 - Fixed Rate (FR) - The channel shall operate at the rate set by the sdslRate parameter and supported at the remote unit either by default, manual switch setting, or Smart Manual mode on the modem. Support of the two-level signalling mechanism at the remote is known as Smart Manual mode. The remote unit is configured via a two-level signaling mechanism prior to the normal startup sequence. This mechanism allows the link rate to be controlled by the Central Office shelf. If the remote modem does not support the two-level signaling mechanism, the system will timeout and the default startup sequence will begin. Mode 2 - Rate Adaptive (RA) - NOT supported in this MIB yet. Allows the unit to evaluate the characteristics of the SDSL channel and adapt the data rate based upon user-defined performance criteria.
                 sdslRemFeatures 1.3.6.1.4.1.927.1.13.1.1.9.1.3 short read-write
This will variable will reflect the features supported by the remote unit (modem) which are received during the two-level signaling mechanism that occurs before the start-up sequence.
                 sdslRate 1.3.6.1.4.1.927.1.13.1.1.9.1.4 integer read-write
The desired rate for the particular SDSL span. Set at the CO using management software
                 sdslLineConfProfileRowStatus 1.3.6.1.4.1.927.1.13.1.1.9.1.5 rowstatus read-only
This object is used to create a new row or modify or delete an existing row in this table. If the implementator of this MIB has choosen not to implement 'dynamic assignment' of profiles, this object is not useful and should return noSuchName upon SNMP request.
         sdslLineAlarmConfProfileIndexNext 1.3.6.1.4.1.927.1.13.1.1.10 integer read-only
This object contains an appropriate value to be used for sdslLineAlarmConfProfileIndex when creating entries in the sdslLineAlarmConfTable. The value '0' indicates that no unassigned entries are available. To obtain the sdslLineAlarmConfProfileIndexNext value for a new entry, the manager issues a management protocol retrieval operation to obtain the current value of this object. After each retrieval, the agent should modify the value to the next unassigned index. If the implementator of this MIB has choosen not to implement 'dynamic assignment' of profiles, this object is not useful and should return noSuchName upon SNMP request.
         sdslLineAlarmConfProfileTable 1.3.6.1.4.1.927.1.13.1.1.11 no-access
This table contains information on the sdsl line configuration. One entry in this table reflects a profile defined by a manager which can be used to configure the modem for a physical line
               sdslLineAlarmConfProfileEntry 1.3.6.1.4.1.927.1.13.1.1.11.1 no-access
Each entry consists of a list of parameters that represents the alarm configuration for one sdsl line. A profile is created in one step with all necessary parameter values and sdslLineAlarmConfProfileRowStatus set to createAndGo. This RowStatus object is also used to delete destroy profiles. Each entry is taken from the original Pairgain SDSL MIB called sdslAlarmSeverityEntry which provided: severity settings for SDSL alarms reporting and threshold settings for Errored Second(ES), Margin(MAR), Unavailable Seconds(UAS).
                   sdslLineAlarmConfProfileIndex 1.3.6.1.4.1.927.1.13.1.1.11.1.1 sdsllineprofiletype no-access
This object is used by the line alarm configuration table in order to identify a row of this table
                   sdslLOSWAlarmSetting 1.3.6.1.4.1.927.1.13.1.1.11.1.2 pgsdslalarmseveritymode read-write
Sets the severity for Loss of Sync Word alarm.
                   sdslMarginThreshold 1.3.6.1.4.1.927.1.13.1.1.11.1.3 byte read-write
Sets the SDSL Margin threshold value.
                   sdslMarginAlarmSetting 1.3.6.1.4.1.927.1.13.1.1.11.1.4 pgsdslalarmseveritymode read-write
Sets the severity for Margin threshold exceeded alarm.
                   sdslESThreshold 1.3.6.1.4.1.927.1.13.1.1.11.1.5 byte read-write
Sets the SDSL Errored Seconds threshold value.
                   sdslESAlarmSetting 1.3.6.1.4.1.927.1.13.1.1.11.1.6 pgsdslalarmseveritymode read-write
Sets the severity for Errored Seconds threshold exceeded alarm.
                   sdslUASThreshold 1.3.6.1.4.1.927.1.13.1.1.11.1.7 byte read-write
Sets the SDSL Unavailable Seconds threshold value.
                   sdslUASAlarmSetting 1.3.6.1.4.1.927.1.13.1.1.11.1.8 pgsdslalarmseveritymode read-write
Sets the severity for UAS threshold exceeded alarm.
                   sdslLineAlarmConfProfileRowStatus 1.3.6.1.4.1.927.1.13.1.1.11.1.9 rowstatus read-only
This object is used to create a new row or modify or delete an existing row in this table. If the implementator of this MIB has choosen not to implement 'dynamic assignment' of profiles, this object is not useful and should return noSuchName upon SNMP request.
         pgSdslModGenTable 1.3.6.1.4.1.927.1.13.1.1.12 no-access
This table provides general information about the SDSL modem. pgSdslModGenVersionNum: Contains the Modem software version number pgSdslModGenListNum: When used with the vendor number the list number provides a unique model number identifier for the modem. pgSdslModGenVendNum: A unique number given to every Pairgain product. pgSdslModGenFeatures A 32 bit flag that has bits set according to feature supported by the modem. pgSdslModGenSerialNum 16 bits, used with manufacturing date to give unique identifier for the modem. pgSdslModGenMfgDate 16 bit, used with the Serial number to give a unique identifier for the modem.
               pgSdslModGenEntry 1.3.6.1.4.1.927.1.13.1.1.12.1 no-access
Entries (one per port) for general modem information.
                   pgSdslModGenVersionNum 1.3.6.1.4.1.927.1.13.1.1.12.1.1 byte read-only
Identifies the software version number of the modem.
                   pgSdslModGenListNum 1.3.6.1.4.1.927.1.13.1.1.12.1.2 byte read-only
Identifies the list number of the modem.
                   pgSdslModGenVendNum 1.3.6.1.4.1.927.1.13.1.1.12.1.3 byte read-only
Identifies the vendor number of the modem. The vendor number is a Pair Gain product unique identifier.
                   pgSdslModGenFeatures 1.3.6.1.4.1.927.1.13.1.1.12.1.4 integer32 read-only
Contains the feature bytes from the modem.
                   pgSdslModGenSerialNum 1.3.6.1.4.1.927.1.13.1.1.12.1.5 short read-only
Contains the Serial number of the modem read from the modem's NVRAM.
                   pgSdslModGenMfgDate 1.3.6.1.4.1.927.1.13.1.1.12.1.6 short read-only
Contains the Manufacturing date of the modem read from the modem's NVRAM.
         pgSdslModStatTable 1.3.6.1.4.1.927.1.13.1.1.13 no-access
This table provides modem statistics gathered from the modem through EOC messages. These statistics correspond to a subset of those in the standard ifTable. Ethernet port statistics are given in the following objects: pgSdslModEthOperStatus: the status of the ethernet link. pgSdslModEthInOctets pgSdslModEthInUcastPkts pgSdslModEthInNUcastPkts pgSdslModEthInDiscards pgSdslModEthInErrors pgSdslModEthOutOctets pgSdslModEthOutUcastPkts pgSdslModEthOutNUcastPkts pgSdslModEthOutErrors SDSL port statistics are given in the following objects: pgSdslModDslInOctets pgSdslModDslInUcastPkts pgSdslModDslInNUcastPkts pgSdslModDslInDiscards pgSdslModDslInErrors pgSdslModDslOutOctets pgSdslModDslOutUcastPkts pgSdslModDslOutNUcastPkts pgSdslModDslOutErrors
               pgSdslModStatEntry 1.3.6.1.4.1.927.1.13.1.1.13.1 no-access
Entries (one per port) for the modem statistics.
                   pgSdslModEthOperStatus 1.3.6.1.4.1.927.1.13.1.1.13.1.1 integer read-only
Identifies the status of the modem's ethernet port. Up or Down Enumeration: 'down': 2, 'unknown': 4, 'testing': 3, 'up': 1, 'dormant': 5.
                   pgSdslModEthInOctets 1.3.6.1.4.1.927.1.13.1.1.13.1.2 counter32 read-only
modem's Ethernet ifInOctet count
                   pgSdslModEthInUcastPkts 1.3.6.1.4.1.927.1.13.1.1.13.1.3 counter32 read-only
modem's Ethernet ifInUcastPkts count
                   pgSdslModEthInNUcastPkts 1.3.6.1.4.1.927.1.13.1.1.13.1.4 counter32 read-only
modem's Ethernet ifNUcastPkts count
                   pgSdslModEthInDiscards 1.3.6.1.4.1.927.1.13.1.1.13.1.5 counter32 read-only
modem's Ethernet ifInDiscards count
                   pgSdslModEthInErrors 1.3.6.1.4.1.927.1.13.1.1.13.1.6 counter32 read-only
modem's Ethernet ifInErrors count
                   pgSdslModEthOutOctets 1.3.6.1.4.1.927.1.13.1.1.13.1.7 counter32 read-only
modem's Ethernet ifOutOctets count
                   pgSdslModEthOutUcastPkts 1.3.6.1.4.1.927.1.13.1.1.13.1.8 counter32 read-only
modem's Ethernet ifOutUcastPkts count
                   pgSdslModEthOutNUcastPkts 1.3.6.1.4.1.927.1.13.1.1.13.1.9 counter32 read-only
modem's Ethernet ifOutNUcastPkts count
                   pgSdslModEthOutErrors 1.3.6.1.4.1.927.1.13.1.1.13.1.10 counter32 read-only
modem's Ethernet ifOutErrors count
                   pgSdslModDslInOctets 1.3.6.1.4.1.927.1.13.1.1.13.1.11 counter32 read-only
modem's Dsl ifInOctets count
                   pgSdslModDslInUcastPkts 1.3.6.1.4.1.927.1.13.1.1.13.1.12 counter32 read-only
modem's Dsl ifInUcastPkts count
                   pgSdslModDslInNUcastPkts 1.3.6.1.4.1.927.1.13.1.1.13.1.13 counter32 read-only
modem's Dsl ifInNUcastPkts count
                   pgSdslModDslInDiscards 1.3.6.1.4.1.927.1.13.1.1.13.1.14 counter32 read-only
modem's Dsl ifInDiscards count
                   pgSdslModDslInErrors 1.3.6.1.4.1.927.1.13.1.1.13.1.15 counter32 read-only
modem's Dsl ifInErrors count
                   pgSdslModDslOutOctets 1.3.6.1.4.1.927.1.13.1.1.13.1.16 counter32 read-only
modem's Dsl ifOutOctets count
                   pgSdslModDslOutUcastPkts 1.3.6.1.4.1.927.1.13.1.1.13.1.17 counter32 read-only
modem's Dsl ifOutUcastPkts count
                   pgSdslModDslOutNUcastPkts 1.3.6.1.4.1.927.1.13.1.1.13.1.18 counter32 read-only
modem's Dsl ifOutNUcastPkts count
                   pgSdslModDslOutErrors 1.3.6.1.4.1.927.1.13.1.1.13.1.19 counter32 read-only
modem's Dsl ifOutErrors count