OSPF-TE-DRAFT00-MIB: View SNMP OID List / Download MIB

VENDOR: INTERNET-STANDARD


 Home MIB: OSPF-TE-DRAFT00-MIB
Download as:   
SNMPv2-CONF, OSPF-MIB, SNMPv2-SMI, INET-ADDRESS-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 ospfTeMIB 1.3.6.1.2.1.10.9988
This MIB contains managed object definitions for extensions to the OSPF MIB in support of Traffic Engienering (TE). Copyright (C) The Internet Society (2006). This version of this MIB module is part of RFCXXX; see the RFC itself for full legal notices.
           ospfTeNotifications 1.3.6.1.2.1.10.9988.0
           ospfTeObjects 1.3.6.1.2.1.10.9988.1
               ospfTeScalars 1.3.6.1.2.1.10.9988.1.1
               ospfTeTables 1.3.6.1.2.1.10.9988.1.2
                   ospfTeLsdbTable 1.3.6.1.2.1.10.9988.1.2.1 no-access
This table indicates multiple sub-TLVs information in opaque LSA which have been supported by [OSPF-TE].
                       ospfTeLsdbEntry 1.3.6.1.2.1.10.9988.1.2.1.1 no-access
This entry contains each sub-TLVs information commonly utilized in both MPLS and GMPLS
                           ospfTeSrlgIndex 1.3.6.1.2.1.10.9988.1.2.1.1.1 unsigned32 no-access
This index is utilized to identify multiple SRLG values on a local or remote TE link.
                           ospfTeLinkType 1.3.6.1.2.1.10.9988.1.2.1.1.1 integer read-only
This indicates the type of the link such as point-to-point or multi-access Enumeration: 'multiAccess': 2, 'pointToPoint': 1.
                           ospfTeLinkIdAddr 1.3.6.1.2.1.10.9988.1.2.1.1.2 inetaddress read-only
This indicates the Router ID of the neighbor in the case of point-to-point links. This also indicates the interface address of the designated router in the case of multi-access links.
                           ospfTeLinkIdAddrType 1.3.6.1.2.1.10.9988.1.2.1.1.3 inetaddresstype read-only
This object indicates the type of TE link ID address.
                           ospfTeMetric 1.3.6.1.2.1.10.9988.1.2.1.1.4 integer32 read-only
This indicates the traffic engineering metric value of the TE link.
                           ospfTeMaxBandwidth 1.3.6.1.2.1.10.9988.1.2.1.1.5 unsigned32 read-only
This indicates the maximum bandwidth that can be used on this link in this direction
                           ospfTeMaxReservableBandwidth 1.3.6.1.2.1.10.9988.1.2.1.1.6 unsigned32 read-only
This indicates the maximum bandwidth that may be reserved on this link in this direction
                           ospfTeUnreservedBandwidthPri0 1.3.6.1.2.1.10.9988.1.2.1.1.7 unsigned32 read-only
This indicates the amount of bandwidth not yet reserved at the priority 0
                           ospfTeUnreservedBandwidthPri1 1.3.6.1.2.1.10.9988.1.2.1.1.8 unsigned32 read-only
This indicates the amount of bandwidth not yet reserved at the priority 1
                           ospfTeUnreservedBandwidthPri2 1.3.6.1.2.1.10.9988.1.2.1.1.9 unsigned32 read-only
This indicates the amount of bandwidth not yet reserved at the priority 2
                           ospfTeUnreservedBandwidthPri3 1.3.6.1.2.1.10.9988.1.2.1.1.10 unsigned32 read-only
This indicates the amount of bandwidth not yet reserved at the priority 3
                           ospfTeUnreservedBandwidthPri4 1.3.6.1.2.1.10.9988.1.2.1.1.11 unsigned32 read-only
This indicates the amount of bandwidth not yet reserved at the priority 4
                           ospfTeUnreservedBandwidthPri5 1.3.6.1.2.1.10.9988.1.2.1.1.12 unsigned32 read-only
This indicates the amount of bandwidth not yet reserved at the priority 5
                           ospfTeUnreservedBandwidthPri6 1.3.6.1.2.1.10.9988.1.2.1.1.13 unsigned32 read-only
This indicates the amount of bandwidth not yet reserved at the priority 6
                           ospfTeUnreservedBandwidthPri7 1.3.6.1.2.1.10.9988.1.2.1.1.14 unsigned32 read-only
This indicates the amount of bandwidth not yet reserved at the priority 7
                           ospfTeAdministrativeGroup 1.3.6.1.2.1.10.9988.1.2.1.1.15 integer32 read-only
This indicates the Administrative Group which the link belong to. Since the value is a bit mask, the link can belong to multiple groups. This is also called Resource Class/Color.
                           ospfTeLocalId 1.3.6.1.2.1.10.9988.1.2.1.1.16 unsigned32 read-only
This indicates the Link local identifier of an unnumbered link.
                           ospfTeRemoteId 1.3.6.1.2.1.10.9988.1.2.1.1.17 unsigned32 read-only
This indicates the Link remote identifier of an unnumbered link.
                           ospfTeLinkProtectionType 1.3.6.1.2.1.10.9988.1.2.1.1.18 integer read-only
This object indicates the protection type of the TE link Enumeration: 'dedicatedOneToOne': 3, 'unprotected': 1, 'enhanced': 5, 'shared': 2, 'dedicatedOnePlusOne': 4, 'extraTraffic': 0.
                   ospfTeLocalIntAddrTable 1.3.6.1.2.1.10.9988.1.2.2 no-access
This table contains the IP address information of a local TE link.
                       ospfTeLocalIntAddrEntry 1.3.6.1.2.1.10.9988.1.2.2.1 no-access
This entry contains the IP address information of the local TE link.
                           ospfTeLocalIntAddrIndex 1.3.6.1.2.1.10.9988.1.2.2.1.1 unsigned32 no-access
This indicates the index to identify multiple local TE links
                           ospfTeLocalIntAddr 1.3.6.1.2.1.10.9988.1.2.2.1.2 inetaddress read-only
This object indicates the address of the local TE link.
                           ospfTeLocalIntAddrType 1.3.6.1.2.1.10.9988.1.2.2.1.3 inetaddresstype read-only
This object indicates the type of local TE link address.
                   ospfTeRemoteIntAddrTable 1.3.6.1.2.1.10.9988.1.2.3 no-access
This table contains the IP address information of a remote TE link.
                       ospfTeRemoteIntAddrEntry 1.3.6.1.2.1.10.9988.1.2.3.1 no-access
This entry contains the IP address information of the remote TE link.
                           ospfTeRemoteIntAddrIndex 1.3.6.1.2.1.10.9988.1.2.3.1.1 unsigned32 no-access
This indicates the index to identify multiple remote TE links.
                           ospfTeRemoteIntAddr 1.3.6.1.2.1.10.9988.1.2.3.1.2 inetaddress read-only
This object indicates the address of the remote TE link.
                           ospfTeRemoteIntAddrType 1.3.6.1.2.1.10.9988.1.2.3.1.3 inetaddresstype read-only
This object indicates the type of the remote TE link address.
                   ospfTeSwCapTable 1.3.6.1.2.1.10.9988.1.2.4 no-access
This table contains the GMPLS OSPF TE switching capability information.
                       ospfTeSwCapEntry 1.3.6.1.2.1.10.9988.1.2.4.1 no-access
This entry relates each TE link with its GMPLS TE switching capability information. IF the MIB deals with only OSPF-TE information, the value of each object related with GMPLS TE extensions should be null.
                           ospfTeSwCapIndex 1.3.6.1.2.1.10.9988.1.2.4.1.1 unsigned32 no-access
This index is utilized to identify multiple switching functions on a local or remote TE link.
                           ospfTeSwitchingType 1.3.6.1.2.1.10.9988.1.2.4.1.2 integer read-only
This object indicates the GMPLS switching capability assigned to the TE link. Enumeration: 'fsc': 200, 'lsc': 150, 'tdm': 100, 'psc2': 2, 'unknown': 0, 'psc1': 1, 'psc4': 4, 'l2sc': 51, 'psc3': 3.
                           ospfTeEncoding 1.3.6.1.2.1.10.9988.1.2.4.1.3 integer read-only
This object indicates the GMPLS encoding type assigned to the TE link. Enumeration: 'fiber': 9, 'fiberChannel': 11, 'ansiEtsiPdh': 3, 'packet': 1, 'sdhSonet': 5, 'digitalWrapper': 7, 'ethernet': 2, 'lambda': 8.
                           ospfTeMaxLspBandwidthPri0 1.3.6.1.2.1.10.9988.1.2.4.1.4 unsigned32 read-only
This object indicates the maximum bandwidth of the TE link at the priority 0 for GMPLS LSP creation.
                           ospfTeMaxLspBandwidthPri1 1.3.6.1.2.1.10.9988.1.2.4.1.5 unsigned32 read-only
This object indicates the maximum bandwidth of the TE link at the priority 1 for GMPLS LSP creation.
                           ospfTeMaxLspBandwidthPri2 1.3.6.1.2.1.10.9988.1.2.4.1.6 unsigned32 read-only
This object indicates the maximum bandwidth of the TE link at the priority 2 for GMPLS LSP creation.
                           ospfTeMaxLspBandwidthPri3 1.3.6.1.2.1.10.9988.1.2.4.1.7 unsigned32 read-only
This object indicates the maximum bandwidth of the TE link at the priority 3 for GMPLS LSP creation.
                           ospfTeMaxLspBandwidthPri4 1.3.6.1.2.1.10.9988.1.2.4.1.8 unsigned32 read-only
This object indicates the maximum bandwidth of the TE link at the priority 4 for GMPLS LSP creation.
                           ospfTeMaxLspBandwidthPri5 1.3.6.1.2.1.10.9988.1.2.4.1.9 unsigned32 read-only
This object indicates the maximum bandwidth of the TE link at the priority 5 for GMPLS LSP creation.
                           ospfTeMaxLspBandwidthPri6 1.3.6.1.2.1.10.9988.1.2.4.1.10 unsigned32 read-only
This object indicates the maximum bandwidth of the TE link at the priority 6 for GMPLS LSP creation.
                           ospfTeMaxLspBandwidthPri7 1.3.6.1.2.1.10.9988.1.2.4.1.11 unsigned32 read-only
This object indicates the maximum bandwidth of the TE link at the priority 7 for GMPLS LSP creation.
                           ospfTeLspMinBandwidth 1.3.6.1.2.1.10.9988.1.2.4.1.12 unsigned32 read-only
This object indicates the minimum bandwidth of the TE link for GMPLS LSP creation if the switching capability field is TDM, PSC- 1, PSC-2, PSC-3, or PSC-4.
                           ospfTeIntMtu 1.3.6.1.2.1.10.9988.1.2.4.1.13 integer32 read-write
This object indicates the MTU of the local or remote TE link
                           ospfTeIndication 1.3.6.1.2.1.10.9988.1.2.4.1.14 integer read-only
This object indicates whether the interface supports Standard or Arbitrary SONET/SDH. Enumeration: 'standard': 0, 'arbitrary': 1.
                   ospfTeSrlgTable 1.3.6.1.2.1.10.9988.1.2.5 no-access
This table contains the SRLG information of the TE link.
                       ospfTeSrlgEntry 1.3.6.1.2.1.10.9988.1.2.5.1 no-access
This entry relates each TE link with its SRLG information.
                           ospfTeSrlg 1.3.6.1.2.1.10.9988.1.2.5.1.2 integer32 read-only
This object indicate the SRLG value assigned to a local or remote TE link
           ospfTeConformance 1.3.6.1.2.1.10.9988.2
               ospfTeGroups 1.3.6.1.2.1.10.9988.2.1
                   ospfTeMainGroup 1.3.6.1.2.1.10.9988.2.1.1
Collection of objects for OSPF-TE management
               ospfTeCompliances 1.3.6.1.2.1.10.9988.2.2
                   ospfTeModuleFullCompliance 1.3.6.1.2.1.10.9988.2.2.1
Compliance statement for agents provides full support for the OSPF-TE MIB
                   ospfTeModuleReadOnlyCompliance 1.3.6.1.2.1.10.9988.2.2.2
Compliance requirement for implementations only provide read-only support for OSPF-TE. Such devices can then be monitored but cannot be configured using this MIB module.