OPLINK-BTI-OPS-MIB: View SNMP OID List / Download MIB

VENDOR: OPLINK COMMUNICATIONS


 Home MIB: OPLINK-BTI-OPS-MIB
Download as:   

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 deviceOPSMv2_MIB 1.3.6.1.4.1.19547.1.7
oplink device OPSM version 2 mib
     version2 1.3.6.1.4.1.19547.1.7.1
         emuTable 1.3.6.1.4.1.19547.1.7.1.1 no-access
controller card parameters
             emuEntry 1.3.6.1.4.1.19547.1.7.1.1.1 no-access
Row definition for emuTable
                 emuMfgName 1.3.6.1.4.1.19547.1.7.1.1.1.1 displaystring read-only
Manufacturer name.
                 emuModuleType 1.3.6.1.4.1.19547.1.7.1.1.1.2 displaystring read-only
Module type.
                 emuPartNum 1.3.6.1.4.1.19547.1.7.1.1.1.3 displaystring read-only
Part Number. Can be any combination of alphanumerical characters.
                 emuSerialNum 1.3.6.1.4.1.19547.1.7.1.1.1.4 displaystring read-only
Serial number. Can be any combination of alphanumerical characters.
                 emuMfgDate 1.3.6.1.4.1.19547.1.7.1.1.1.5 displaystring read-only
Manufacturing date. The format is yyyy-mm-dd.
                 emuCaliDate 1.3.6.1.4.1.19547.1.7.1.1.1.6 displaystring read-only
Manufacturing date. The format is yyyy-mm-dd
                 emuFirmwareVer 1.3.6.1.4.1.19547.1.7.1.1.1.7 displaystring read-only
Software version. The format is X.Y.Z
                 emuHardwareVer 1.3.6.1.4.1.19547.1.7.1.1.1.8 displaystring read-only
Hardware version. The format is X.Y.Z
                 emuVendorID 1.3.6.1.4.1.19547.1.7.1.1.1.9 displaystring read-only
Vendor ID. The ID number of vendor.
                 emuSysDate 1.3.6.1.4.1.19547.1.7.1.1.1.10 displaystring read-write
System date. The format is YYYY-MM-DD
                 emuSysTime 1.3.6.1.4.1.19547.1.7.1.1.1.11 displaystring read-write
System time. The format is HH:MM:SS
                 emuIpAddr 1.3.6.1.4.1.19547.1.7.1.1.1.12 displaystring read-write
IP address. The format is aaa.bbb.ccc.ddd
                 emuNetMask 1.3.6.1.4.1.19547.1.7.1.1.1.13 displaystring read-write
Netmask. The format is aaa.bbb.ccc.ddd
                 emuGateway 1.3.6.1.4.1.19547.1.7.1.1.1.14 displaystring read-write
Gateway. The format is aaa.bbb.ccc.ddd
                 emuMacAddr 1.3.6.1.4.1.19547.1.7.1.1.1.15 displaystring read-only
Mac address. The format is aa:bb:cc:dd:ee:ff
                 emuUptime 1.3.6.1.4.1.19547.1.7.1.1.1.16 integer32 read-only
Uptime. System uptime (Unit: s)
                 emuBoardTemp 1.3.6.1.4.1.19547.1.7.1.1.1.17 hetenthcentigrade read-only
BoardTemp. Get temperature of EMU card(Unit: 0.1 degree celsius)
                 emuHighTemperatureThreshold 1.3.6.1.4.1.19547.1.7.1.1.1.18 hetenthcentigrade read-write
HighTempThreshold. Get/Set high temperature threshold value of EMU card(Unit: 0.1 degree celsuis), range:550~750
                 emuLowTemperatureThreshold 1.3.6.1.4.1.19547.1.7.1.1.1.19 hetenthcentigrade read-write
LowTempThreshold. Get/Set low temperature threshold value of EMU card(Unit: 0.1 degree celsius), range:-250~0
                 emuGetModConfig 1.3.6.1.4.1.19547.1.7.1.1.1.20 displaystring read-only
GetModConfig. Get current OPSM module config. format: OPSM.PA600/OPSM.BA
                 emuDelModConfig 1.3.6.1.4.1.19547.1.7.1.1.1.21 displaystring read-write
DelModConfig. get: return a blank character set: Delete current OPSM module config. format: OPSM.PA600/OPSM.BA
                 emuAddModConfig 1.3.6.1.4.1.19547.1.7.1.1.1.22 displaystring read-write
AddModConfig. get: return a blank character set: Add OPSM module config, format: OPSM.PA600/OPSM.BA
                 emuSaveConfig 1.3.6.1.4.1.19547.1.7.1.1.1.23 displaystring read-write
SaveConfig. get: return a blank character set: parameter is null.
                 emuRestoreDefault 1.3.6.1.4.1.19547.1.7.1.1.1.24 displaystring read-write
RestoreDefault. get: return a blank character set: parameter is null.
                 emuReset 1.3.6.1.4.1.19547.1.7.1.1.1.25 displaystring read-write
Reset. get: return a blank character set: parameter is null.
                 emuFirmwareUpgradeStart 1.3.6.1.4.1.19547.1.7.1.1.1.40 displaystring read-write
FirmwareUpgradeStart. get: return a blank character set: The name of the upgrade iamge which must be upload to the /var/ftp directory before do this operation.
                 emuFirmwareUpgradeStatus 1.3.6.1.4.1.19547.1.7.1.1.1.41 displaystring read-only
FirmwareUpgradeStatus. The status and percent of upgrade format: [status], [percent] status:0--none upgrade, 1--in progress, 2--upgrade successful, others-upgrade error code percent:1-100
                 emuGetSNMPConfig 1.3.6.1.4.1.19547.1.7.1.1.1.50 octet string read-only
Get all snmp users' information. format:[Version] [Trap on/off] [IP] [Port] [Community/Username] [Access/Level]... Version:v1|v2c|v3 Trap on/off:trap|notrap Access:Read|Write level:noauth|authNoPriv MD5/SHA|authPriv MD5/SHA DES/AES
                 emuDelSNMPConfig 1.3.6.1.4.1.19547.1.7.1.1.1.51 octet string read-write
Delete snmp user. get: return a blank character set: v1 or v2c format:[version] [IP] [Community] v3 format: [version] [username] Version:v1|v2c|v3 Community/Username:6-15 characters IP:xxx.xxx.xxx.xxx
                 emuAddSNMPConfig 1.3.6.1.4.1.19547.1.7.1.1.1.52 octet string read-write
Add snmp user. get: return a blank character set: v1 or v2c format:[Version] [Trap on/off] [IP] [Port] [Community] [Access] v3 format:[Version] [Trap on/off] [IP] [Port] [Username] [Access] [EngineID] [Level] [Auth protocol] [AuthKey] [Priv protocal] [PrivKey] Version:v1|v2c|v3 Trap on/off:trap|notrap IP:xxx.xxx.xxx.xxx Port:0-65535 Community/Username:6-15 characters Access:r|w (r:read;w:write) EngineID:0x(10-128) characters Level:AuthPriv|AuthNoPriv|noAuthNoPriv Auth protocol:MD5|SHA AuthKey:8-15 characters Priv protocal:DES|AES PrivKey:8-15 characters
                 emuGetCurrentAlarm 1.3.6.1.4.1.19547.1.7.1.1.1.60 octet string read-only
Current alarm. The current alarm of system.
                 emuGetHisAlarm 1.3.6.1.4.1.19547.1.7.1.1.1.61 displaystring read-only
History alarm. Full directory of history alarm file.
                 emuChassisId 1.3.6.1.4.1.19547.1.7.1.1.1.1001 integer32 no-access
chassis index
                 emuSlotId 1.3.6.1.4.1.19547.1.7.1.1.1.1002 integer32 no-access
slot index
                 emuItemId 1.3.6.1.4.1.19547.1.7.1.1.1.1003 integer32 no-access
port/channel index
         opsmTable 1.3.6.1.4.1.19547.1.7.1.2 no-access
OPSM parameters
             opsmEntry 1.3.6.1.4.1.19547.1.7.1.2.1 no-access
Row definition for opsmTable
                 opsmMfgName 1.3.6.1.4.1.19547.1.7.1.2.1.1 displaystring read-only
Manufacturer name.
                 opsmPartNum 1.3.6.1.4.1.19547.1.7.1.2.1.2 displaystring read-only
Part Number. Can be any combination of alphanumerical characters.
                 opsmSerialNum 1.3.6.1.4.1.19547.1.7.1.2.1.3 displaystring read-only
Serial number. Can be any combination of alphanumerical characters.
                 opsmMfgDate 1.3.6.1.4.1.19547.1.7.1.2.1.4 displaystring read-only
Manufacturing date. The format is yyyy-mm-dd. yyyy-1st and 2nd bytes. mm-3rd byte, dd-4th byte
                 opsmCaliDate 1.3.6.1.4.1.19547.1.7.1.2.1.5 displaystring read-only
Manufacturing date. The format is yyyy-mm-dd. yyyy-1st and 2nd bytes. mm-3rd byte, dd-4th byte
                 opsmHardwareVer 1.3.6.1.4.1.19547.1.7.1.2.1.6 displaystring read-only
Hardware version. The format is X.Y.Z
                 opsmVendorID 1.3.6.1.4.1.19547.1.7.1.2.1.7 displaystring read-only
Vendor ID. The ID number of vendor
                 opsmModuleType 1.3.6.1.4.1.19547.1.7.1.2.1.8 displaystring read-only
Module type.
                 opsmFirmwareVer 1.3.6.1.4.1.19547.1.7.1.2.1.9 displaystring read-only
Software version. The format is X.Y.Z
                 opsmReset 1.3.6.1.4.1.19547.1.7.1.2.1.10 integer32 read-write
0: hard reset, 1: soft reset.
                 opsmProtectionMode 1.3.6.1.4.1.19547.1.7.1.2.1.20 integer32 read-write
The mode of protection switch. 0: clear, 1: force to primary, 2: force to secondary.
                 opsmRevertiveSetting 1.3.6.1.4.1.19547.1.7.1.2.1.21 integer32 read-write
The action when the opticial of primary channel is resumed. 0: Non-Revertive, 1: Revertive.
                 opsmDiffSwitchSetting 1.3.6.1.4.1.19547.1.7.1.2.1.22 integer32 read-write
Enable or disable the function of input power different detection. 0: Disable, 1: Enable.
                 opsmDiffAlarmThreshold 1.3.6.1.4.1.19547.1.7.1.2.1.23 hetenthdbm read-write
Get/Set Input optical power different alarm threshold between primary and secondary, default:10,(Unit:0.1dBm),range: 0--100
                 opsmDiffSwitchThreshold 1.3.6.1.4.1.19547.1.7.1.2.1.24 hetenthdbm read-write
Get/Set Input optical power switching threshold between primary and secondary, default:20,(Unit:0.1dBm),range: 0--100
                 opsmInherentDiffOffset 1.3.6.1.4.1.19547.1.7.1.2.1.25 hetenthdbm read-write
Get/Set Input Optical Power different Offset between primary and secondary,default:0,(Unit:0.1dBm),range: -300--300
                 opsmWTRTime 1.3.6.1.4.1.19547.1.7.1.2.1.26 integer32 read-write
Used in conjunction with PortID to access WTR time: default:5,(Unit:1s),range: 1--720
                 opsmSwitchStatus 1.3.6.1.4.1.19547.1.7.1.2.1.27 integer32 read-only
The status of protection switch. 0: IDLE, 1: WTR, 2: Auto, 3: SF_ALL, 4: N/A, 5: Forced.
                 opsmSwitchPosition 1.3.6.1.4.1.19547.1.7.1.2.1.28 integer32 read-only
The position of switch. 0: Secondary 1: Primary
                 opsmInputLosAlarmThrPathP 1.3.6.1.4.1.19547.1.7.1.2.1.40 hetenthdbm read-write
The input los alarm threshold on primary path default: -250,(Unit:0.1dBm),range: -350--350
                 opsmInputLosAlarmThrPathS 1.3.6.1.4.1.19547.1.7.1.2.1.41 hetenthdbm read-write
The input los alarm threshold on secondary path default: -250,(Unit:0.1dBm),range: -350--350
                 opsmInputLosAlarmHys 1.3.6.1.4.1.19547.1.7.1.2.1.42 hetenthdbm read-write
The input los alarm hystersis on both path default: 10,(Unit:0.1dB),range: 10--30
                 opsmInputPowerPathP 1.3.6.1.4.1.19547.1.7.1.2.1.43 integer32 read-only
The input power on primary path. (Unit:0.1dBm)
                 opsmInputPowerPathS 1.3.6.1.4.1.19547.1.7.1.2.1.44 integer32 read-only
The input power on secondary path. (Unit:0.1dBm)
                 opsmSwitchCount 1.3.6.1.4.1.19547.1.7.1.2.1.45 integer32 read-only
Times the switch has changed its position.
                 opsmChassisId 1.3.6.1.4.1.19547.1.7.1.2.1.1001 integer32 no-access
chassis index
                 opsmSlotId 1.3.6.1.4.1.19547.1.7.1.2.1.1002 integer32 no-access
slot index
                 opsmItemId 1.3.6.1.4.1.19547.1.7.1.2.1.1003 integer32 no-access
port/channel index
         oplkV6Traps 1.3.6.1.4.1.19547.1.7.1.1001
                   oplkemuNotifications 1.3.6.1.4.1.19547.1.7.1.1001.1
                       oplkemuNotificationPrefix 1.3.6.1.4.1.19547.1.7.1.1001.1.0
                           oplinkemuTemperatureAbnormal 1.3.6.1.4.1.19547.1.7.1.1001.1.0.1
This trap signifies that emu temperature is exceess or bellow normal temperature range.
                           oplinkemuTemperatureResume 1.3.6.1.4.1.19547.1.7.1.1001.1.0.2
This trap signifies that emu temperature abnormal alarm is clear.
                           oplinkemuFanRemove 1.3.6.1.4.1.19547.1.7.1.1001.1.0.3
This trap signifies that emu fan card is removed.
                           oplinkemuFanInsert 1.3.6.1.4.1.19547.1.7.1.1001.1.0.4
This trap signifies that emu fan remove alarm is clear.
                           oplinkemuPowerRemove 1.3.6.1.4.1.19547.1.7.1.1001.1.0.5
This trap signifies that emu power card is removed.
                           oplinkemuPowerInsert 1.3.6.1.4.1.19547.1.7.1.1001.1.0.6
This trap signifies that emu power remove alarm is clear.
                           oplinkemuVoltageAbnormal 1.3.6.1.4.1.19547.1.7.1.1001.1.0.7
This trap signifies that emu voltage is exceess or bellow normal voltage range.
                           oplinkemuVoltageResume 1.3.6.1.4.1.19547.1.7.1.1001.1.0.8
This trap signifies that emu voltage abnormal alarm is clear.
                           oplinkemuSubCardDelete 1.3.6.1.4.1.19547.1.7.1.1001.1.0.9
This trap signifies that emu sub-card is delete.
                           oplinkemuSubCardAdd 1.3.6.1.4.1.19547.1.7.1.1001.1.0.10
This trap signifies that emu sub-card delete alarm is clear.
                           oplinkemuSubCardUnmatch 1.3.6.1.4.1.19547.1.7.1.1001.1.0.11
This trap signifies that emu sub-card is unmatch with the configuration.
                           oplinkemuSubCardMatch 1.3.6.1.4.1.19547.1.7.1.1001.1.0.12
This trap signifies that emu sub-card unmatch alarm is clear.
                   oplkopsmNotifications 1.3.6.1.4.1.19547.1.7.1.1001.2
                       oplkopsmNotificationPrefix 1.3.6.1.4.1.19547.1.7.1.1001.2.0
                           oplinkopsmInputLosRPI1 1.3.6.1.4.1.19547.1.7.1.1001.2.0.1
This trap signifies that opsm input power los alarm on CH1 primary path is on.
                           oplinkopsmInputLosResumeRPI1 1.3.6.1.4.1.19547.1.7.1.1001.2.0.2
This trap signifies that opsm input power los alarm on CH1 primary path is clear.
                           oplinkopsmInputLosRSI1 1.3.6.1.4.1.19547.1.7.1.1001.2.0.3
This trap signifies that opsm input power los alarm on CH1 secondary path is on.
                           oplinkopsmInputLosResumeRSI1 1.3.6.1.4.1.19547.1.7.1.1001.2.0.4
This trap signifies that opsm input power los alarm on CH1 secondary path is clear.
                           oplinkopsmInputLosRPI2 1.3.6.1.4.1.19547.1.7.1.1001.2.0.5
This trap signifies that opsm input power los alarm on CH2 primary path is on.
                           oplinkopsmInputLosResumeRPI2 1.3.6.1.4.1.19547.1.7.1.1001.2.0.6
This trap signifies that opsm input power los alarm on CH2 primary path is clear.
                           oplinkopsmInputLosRSI2 1.3.6.1.4.1.19547.1.7.1.1001.2.0.7
This trap signifies that opsm input power los alarm on CH2 secondary path is on.
                           oplinkopsmInputLosResumeRSI2 1.3.6.1.4.1.19547.1.7.1.1001.2.0.8
This trap signifies that opsm input power los alarm on CH2 secondary path is clear.
                           oplinkopsmPowerDiffChannel1 1.3.6.1.4.1.19547.1.7.1.1001.2.0.9
This trap signifies that opsm input power different alarm on CH1 is on.
                           oplinkopsmPowerDiffResumeChannel1 1.3.6.1.4.1.19547.1.7.1.1001.2.0.10
This trap signifies that opsm input power different alarm on CH1 is clear.
                           oplinkopsmPowerDiffChannel2 1.3.6.1.4.1.19547.1.7.1.1001.2.0.11
This trap signifies that opsm input power different alarm on CH2 is on.
                           oplinkopsmPowerDiffResumeChannel2 1.3.6.1.4.1.19547.1.7.1.1001.2.0.12
This trap signifies that opsm input power different alarm on CH2 is clear.
                           oplinkopsmSwitchFailChannel1 1.3.6.1.4.1.19547.1.7.1.1001.2.0.13
This trap signifies that opsm switch fail alarm on CH1 is on.
                           oplinkopsmSwitchSuccessChannel1 1.3.6.1.4.1.19547.1.7.1.1001.2.0.14
This trap signifies that opsm switch fail alarm on CH1 is clear.
                           oplinkopsmSwitchFailChannel2 1.3.6.1.4.1.19547.1.7.1.1001.2.0.15
This trap signifies that opsm switch fail alarm on CH2 is on.
                           oplinkopsmSwitchSuccessChannel2 1.3.6.1.4.1.19547.1.7.1.1001.2.0.16
This trap signifies that opsm switch fail alarm on CH2 is clear.
         oplinkTrapCode 1.3.6.1.4.1.19547.1.7.1.1002 displaystring read-only
This object describes oplink trap. It contains information about chassis, slot, port, device type (card type) and specific error code. When get, return 0