ONEACCESS-SNMP-CONFIG-MIB: View SNMP OID List / Download MIB

VENDOR: ONEACCESS


 Home MIB: ONEACCESS-SNMP-CONFIG-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, ONEACCESS-GLOBAL-REG, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 oacSnmpConfigMIB 1.3.6.1.4.1.13191.1.100.2002
fixed compilation issues
   oacSnmpConfig 1.3.6.1.4.1.13191.10.3.4.20
         oacSnmpConfigObjects 1.3.6.1.4.1.13191.10.3.4.20.1
             oacSnmpSource 1.3.6.1.4.1.13191.10.3.4.20.1.1 octet string read-write
snmp source { | any }
             oacSnmpTrapSource 1.3.6.1.4.1.13191.10.3.4.20.1.2 octet string read-write
snmp trap-source { | any }
             oacSnmpMibIfDescrShort 1.3.6.1.4.1.13191.10.3.4.20.1.3 truthvalue read-write
will display the interface name with out spaces between the interface and unit
             oacSnmpChassisId 1.3.6.1.4.1.13191.10.3.4.20.1.4 octet string read-write
Chassis Id of this device.
             oacSnmpMaxMsgSize 1.3.6.1.4.1.13191.10.3.4.20.1.5 integer read-write
maximum size of the snmp message
             oacSnmpCommunityConfigTable 1.3.6.1.4.1.13191.10.3.4.20.1.6 no-access
This table will hold the configuration required to apply the SNMP view on a read/write V2C community.
                 oacSnmpCommunityConfigEntry 1.3.6.1.4.1.13191.10.3.4.20.1.6.1 no-access
A Entry will hold the view applied for a community.
                     oacSnmpCommunityString 1.3.6.1.4.1.13191.10.3.4.20.1.6.1.1 octet string no-access
The community string
                     oacSnmpCommunityAccessType 1.3.6.1.4.1.13191.10.3.4.20.1.6.1.2 integer no-access
This object identifies the type of community for which this community string is attached. Enumeration: 'set-write-community': 2, 'set-read-community': 1.
                     oacSnmpCommunityAclType 1.3.6.1.4.1.13191.10.3.4.20.1.6.1.3 integer read-only
Ipv4 or Ipv6 Acl attached to this snmp community string Enumeration: 'ipv4': 1, 'ipv6': 2.
                     oacSnmpCommunityAclName 1.3.6.1.4.1.13191.10.3.4.20.1.6.1.4 octet string read-only
Ipv4 Acl attached to this snmp community string
                     oacSnmpCommunityV2GroupName 1.3.6.1.4.1.13191.10.3.4.20.1.6.1.5 octet string read-only
Snmp group attached to this community string
                     oacSnmpCommunityisEncrypted 1.3.6.1.4.1.13191.10.3.4.20.1.6.1.6 truthvalue read-only
if true the string should be encrypted. If false it will be a plain text string.
                     oacSnmpCommunityRowStatus 1.3.6.1.4.1.13191.10.3.4.20.1.6.1.7 rowstatus read-only
The row status for this entry
             oacSnmpEngineId 1.3.6.1.4.1.13191.10.3.4.20.1.7 octet string read-write
By default on OneOS the engineId is created by using the mac address of FastEthernet Interface.
             oacSnmpRemoteAgentIpAddr 1.3.6.1.4.1.13191.10.3.4.20.1.8 ipaddress read-write
From the ip address provided remote agent's engine id is discovered.
             oacSnmpRemoteEngineIdConfigTable 1.3.6.1.4.1.13191.10.3.4.20.1.9 no-access
This table will hold the configuration for snmp traps.
                 oacSnmpRemoteEngineIdConfigEntry 1.3.6.1.4.1.13191.10.3.4.20.1.9.1 no-access
A Entry will hold if a trap is enabled or disabled.
                     oacSnmpRemoteEngineId 1.3.6.1.4.1.13191.10.3.4.20.1.9.1.1 octet string no-access
Engine Id of the remote.
                     oacSnmpRemoteEngineIpAddr 1.3.6.1.4.1.13191.10.3.4.20.1.9.1.2 ipaddress read-only
if true the string should be encrypted. If false it will be a plain text string.
                     oacSnmpRemoteEngineMaxMsgSize 1.3.6.1.4.1.13191.10.3.4.20.1.9.1.3 integer read-only
if true the string should be encrypted. if false it will be a plain text string.
                     oacSnmpRemoteEngineRowstatus 1.3.6.1.4.1.13191.10.3.4.20.1.9.1.4 rowstatus read-only
The row status for this entry
             oacSnmpTrapConfigTable 1.3.6.1.4.1.13191.10.3.4.20.1.10 no-access
This table will hold the configuration for snmp traps.
                   oacSnmpTrapConfigEntry 1.3.6.1.4.1.13191.10.3.4.20.1.10.1 no-access
A Entry will hold if a trap is enabled or disabled.
                       oacSnmpTrapConfigType 1.3.6.1.4.1.13191.10.3.4.20.1.10.1.1 integer no-access
The user can enable or disable the following traps: 1. standard, 2. acl, 3. bgp, 4. ipsec, 5. isakmp, 6. isdn, 7. nat, 8. pstn, 9. vrrp Enumeration: 'acl': 2, 'bgp': 3, 'isakmp': 5, 'vrrp': 9, 'nat': 7, 'standard': 1, 'pstn': 8, 'isdn': 6, 'ipsec': 4.
                       oacSnmpTrapConfigisEnabled 1.3.6.1.4.1.13191.10.3.4.20.1.10.1.2 truthvalue read-only
if true the string should be encrypted. if false it will be a plain text string.
                       oacSnmpTrapConfigRowStatus 1.3.6.1.4.1.13191.10.3.4.20.1.10.1.3 rowstatus read-only
The row status for this entry
         oacSnmpConfigConformance 1.3.6.1.4.1.13191.10.3.4.20.2
             oacSnmpConfigGroups 1.3.6.1.4.1.13191.10.3.4.20.2.1
                 oacSnmpConfigGroup 1.3.6.1.4.1.13191.10.3.4.20.2.1.1
Group of SNMP objects
             oacSnmpCompls 1.3.6.1.4.1.13191.10.3.4.20.2.2