Nortel-Magellan-Passport-FrameRelayUniTraceMIB: View SNMP OID List / Download MIB

VENDOR: NORTHERN TELECOM


 Home MIB: Nortel-Magellan-Passport-FrameRelayUniTraceMIB
Download as:   

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
       frUniTrace 1.3.6.1.4.1.562.2.4.1.71.7
           frUniTraceRowStatusTable 1.3.6.1.4.1.562.2.4.1.71.7.1 no-access
This entry controls the addition and deletion of frUniTrace components.
               frUniTraceRowStatusEntry 1.3.6.1.4.1.562.2.4.1.71.7.1.1 no-access
A single entry in the table represents a single frUniTrace component.
                   frUniTraceRowStatus 1.3.6.1.4.1.562.2.4.1.71.7.1.1.1 rowstatus read-write
This variable is used as the basis for SNMP naming of frUniTrace components. These components can be added and deleted.
                   frUniTraceComponentName 1.3.6.1.4.1.562.2.4.1.71.7.1.1.2 displaystring read-only
This variable provides the component's string name for use with the ASCII Console Interface
                   frUniTraceStorageType 1.3.6.1.4.1.562.2.4.1.71.7.1.1.4 storagetype read-only
This variable represents the storage type value for the frUniTrace tables.
                   frUniTraceIndex 1.3.6.1.4.1.562.2.4.1.71.7.1.1.10 nonreplicated no-access
This variable represents the index for the frUniTrace tables.
           frUniTraceFilter 1.3.6.1.4.1.562.2.4.1.71.7.2
               frUniTraceFilterRowStatusTable 1.3.6.1.4.1.562.2.4.1.71.7.2.1 no-access
This entry controls the addition and deletion of frUniTraceFilter components.
                   frUniTraceFilterRowStatusEntry 1.3.6.1.4.1.562.2.4.1.71.7.2.1.1 no-access
A single entry in the table represents a single frUniTraceFilter component.
                       frUniTraceFilterRowStatus 1.3.6.1.4.1.562.2.4.1.71.7.2.1.1.1 rowstatus read-only
This variable is used as the basis for SNMP naming of frUniTraceFilter components. These components cannot be added nor deleted.
                       frUniTraceFilterComponentName 1.3.6.1.4.1.562.2.4.1.71.7.2.1.1.2 displaystring read-only
This variable provides the component's string name for use with the ASCII Console Interface
                       frUniTraceFilterStorageType 1.3.6.1.4.1.562.2.4.1.71.7.2.1.1.4 storagetype read-only
This variable represents the storage type value for the frUniTraceFilter tables.
                       frUniTraceFilterIndex 1.3.6.1.4.1.562.2.4.1.71.7.2.1.1.10 nonreplicated no-access
This variable represents the index for the frUniTraceFilter tables.
               frUniTraceFilterOperationalTable 1.3.6.1.4.1.562.2.4.1.71.7.2.10 no-access
This group provides the operational attributes for the Frame Relay Trace Filter component.
                     frUniTraceFilterOperationalEntry 1.3.6.1.4.1.562.2.4.1.71.7.2.10.1 no-access
An entry in the frUniTraceFilterOperationalTable.
                         frUniTraceFilterTraceType 1.3.6.1.4.1.562.2.4.1.71.7.2.10.1.1 octet string read-write
This attribute specifies the level of filtering required for this trace session. A value of lmi indicates that Lmi frames are traced. A value of dlci indicates that frames from the Dlci specified by the tracedDlci attribute are traced. A value of badFrames indicates that bad received frames (overruns, CRC errors, aborts) are traced. The default is to trace all frames. This attribute can be set while a trace is active and takes effect immediately. Description of bits: lmi(0) dlci(1) badFrames(2)
                         frUniTraceFilterTracedDlci 1.3.6.1.4.1.562.2.4.1.71.7.2.10.1.2 unsigned32 read-write
This attribute specifies a particular Dlci to trace. A value of zero specifies that all Dlcis are to be traced. This attribute can be set while a trace is active and takes effect immediately.
                         frUniTraceFilterDirection 1.3.6.1.4.1.562.2.4.1.71.7.2.10.1.3 octet string read-write
This attribute specifies the direction of the data to be traced as viewed by the service. The values can be egress, and/or ingress. An egress value indicates frames outbound from the service. An ingress value indicates frames inbound to the service. This attribute can be set while a trace is active and takes effect immediately. Description of bits: egress(0) ingress(1)
                         frUniTraceFilterTracedLength 1.3.6.1.4.1.562.2.4.1.71.7.2.10.1.4 unsigned32 read-write
This attribute specifies the maximum number of bytes to trace per frame starting from the byte following the frame flag. If the frame length is longer than the value specified by this attribute, then the traced frame is truncated. This attribute can be set while a trace is active and takes effect immediately.
           frUniTraceOperationalTable 1.3.6.1.4.1.562.2.4.1.71.7.10 no-access
This group provides the operational attributes for the Trace component.
                 frUniTraceOperationalEntry 1.3.6.1.4.1.562.2.4.1.71.7.10.1 no-access
An entry in the frUniTraceOperationalTable.
                     frUniTraceReceiverName 1.3.6.1.4.1.562.2.4.1.71.7.10.1.2 asciistring read-write
This attribute should be set to the name of the desired trace receiver before starting a trace session. All available trace receivers are listed under the Trace Rcvr/ component. This attribute cannot be set while a trace is active.
                     frUniTraceDuration 1.3.6.1.4.1.562.2.4.1.71.7.10.1.3 unsigned32 read-write
This attribute specifies the duration, in minutes, of a trace session. A value of 0 indicates unlimited duration in which case a trace session remains active until a stop command is issued. The default duration is 60 minutes. This attribute cannot be set while a trace is active.
                     frUniTraceQueueLimit 1.3.6.1.4.1.562.2.4.1.71.7.10.1.4 unsigned32 read-write
This attribute specifies the total number of bytes of traced data which may be queued for transmission to the trace receiver. When this limit is exceeded, incoming traced frames are discarded. This attribute can be set while a trace is active and takes effect immediately.
                     frUniTraceSession 1.3.6.1.4.1.562.2.4.1.71.7.10.1.5 rowpointer read-only
This attribute is set automatically. It identifies the Trace Session component which is forwarding the trace data. This attribute is empty unless a trace is active.
 frameRelayUniTraceMIB 1.3.6.1.4.1.562.2.4.2.105
         frameRelayUniTraceGroup 1.3.6.1.4.1.562.2.4.2.105.1
             frameRelayUniTraceGroupBD 1.3.6.1.4.1.562.2.4.2.105.1.4
                 frameRelayUniTraceGroupBD01 1.3.6.1.4.1.562.2.4.2.105.1.4.2
                     frameRelayUniTraceGroupBD01A 1.3.6.1.4.1.562.2.4.2.105.1.4.2.2
         frameRelayUniTraceCapabilities 1.3.6.1.4.1.562.2.4.2.105.3
             frameRelayUniTraceCapabilitiesBD 1.3.6.1.4.1.562.2.4.2.105.3.4
                 frameRelayUniTraceCapabilitiesBD01 1.3.6.1.4.1.562.2.4.2.105.3.4.2
                     frameRelayUniTraceCapabilitiesBD01A 1.3.6.1.4.1.562.2.4.2.105.3.4.2.2