Nortel-Magellan-Passport-FrameRelayMuxMIB: View SNMP OID List / Download MIB

VENDOR: NORTHERN TELECOM


 Home MIB: Nortel-Magellan-Passport-FrameRelayMuxMIB
Download as:   

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 frMux 1.3.6.1.4.1.562.2.4.1.112
         frMuxRowStatusTable 1.3.6.1.4.1.562.2.4.1.112.1 no-access
This entry controls the addition and deletion of frMux components.
             frMuxRowStatusEntry 1.3.6.1.4.1.562.2.4.1.112.1.1 no-access
A single entry in the table represents a single frMux component.
                 frMuxRowStatus 1.3.6.1.4.1.562.2.4.1.112.1.1.1 rowstatus read-write
This variable is used as the basis for SNMP naming of frMux components. These components can be added and deleted.
                 frMuxComponentName 1.3.6.1.4.1.562.2.4.1.112.1.1.2 displaystring read-only
This variable provides the component's string name for use with the ASCII Console Interface
                 frMuxStorageType 1.3.6.1.4.1.562.2.4.1.112.1.1.4 storagetype read-only
This variable represents the storage type value for the frMux tables.
                 frMuxIndex 1.3.6.1.4.1.562.2.4.1.112.1.1.10 integer32 no-access
This variable represents the index for the frMux tables.
         frMuxFramer 1.3.6.1.4.1.562.2.4.1.112.2
             frMuxFramerRowStatusTable 1.3.6.1.4.1.562.2.4.1.112.2.1 no-access
This entry controls the addition and deletion of frMuxFramer components.
                 frMuxFramerRowStatusEntry 1.3.6.1.4.1.562.2.4.1.112.2.1.1 no-access
A single entry in the table represents a single frMuxFramer component.
                     frMuxFramerRowStatus 1.3.6.1.4.1.562.2.4.1.112.2.1.1.1 rowstatus read-only
This variable is used as the basis for SNMP naming of frMuxFramer components. These components cannot be added nor deleted.
                     frMuxFramerComponentName 1.3.6.1.4.1.562.2.4.1.112.2.1.1.2 displaystring read-only
This variable provides the component's string name for use with the ASCII Console Interface
                     frMuxFramerStorageType 1.3.6.1.4.1.562.2.4.1.112.2.1.1.4 storagetype read-only
This variable represents the storage type value for the frMuxFramer tables.
                     frMuxFramerIndex 1.3.6.1.4.1.562.2.4.1.112.2.1.1.10 nonreplicated no-access
This variable represents the index for the frMuxFramer tables.
             frMuxFramerProvTable 1.3.6.1.4.1.562.2.4.1.112.2.10 no-access
This group contains the base provisioning data for the Framer component. Application or hardware interface specific provisioning data is contained in other provisionable Framer groups.
                   frMuxFramerProvEntry 1.3.6.1.4.1.562.2.4.1.112.2.10.1 no-access
An entry in the frMuxFramerProvTable.
                       frMuxFramerInterfaceName 1.3.6.1.4.1.562.2.4.1.112.2.10.1.1 link read-write
This attribute contains a hardware component name. The attribute associates the application with a specific link. This defines the module processor on which Framer's parent component (as well as Framer itself) will run.
             frMuxFramerLinkTable 1.3.6.1.4.1.562.2.4.1.112.2.11 no-access
This group contains attributes defining the framing of data on the link interface.
                   frMuxFramerLinkEntry 1.3.6.1.4.1.562.2.4.1.112.2.11.1 no-access
An entry in the frMuxFramerLinkTable.
                       frMuxFramerFlagsBetweenFrames 1.3.6.1.4.1.562.2.4.1.112.2.11.1.4 unsigned32 read-write
This attribute defines the number of flags that are inserted between frames sent to the link interface.
             frMuxFramerStateTable 1.3.6.1.4.1.562.2.4.1.112.2.12 no-access
This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
                   frMuxFramerStateEntry 1.3.6.1.4.1.562.2.4.1.112.2.12.1 no-access
An entry in the frMuxFramerStateTable.
                       frMuxFramerAdminState 1.3.6.1.4.1.562.2.4.1.112.2.12.1.1 integer read-only
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. Enumeration: 'locked': 0, 'shuttingDown': 2, 'unlocked': 1.
                       frMuxFramerOperationalState 1.3.6.1.4.1.562.2.4.1.112.2.12.1.2 integer read-only
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. Enumeration: 'disabled': 0, 'enabled': 1.
                       frMuxFramerUsageState 1.3.6.1.4.1.562.2.4.1.112.2.12.1.3 integer read-only
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. Enumeration: 'active': 1, 'idle': 0, 'busy': 2.
             frMuxFramerStatsTable 1.3.6.1.4.1.562.2.4.1.112.2.13 no-access
This group contains the operational statistics data for a Framer component.
                   frMuxFramerStatsEntry 1.3.6.1.4.1.562.2.4.1.112.2.13.1 no-access
An entry in the frMuxFramerStatsTable.
                       frMuxFramerFrmToIf 1.3.6.1.4.1.562.2.4.1.112.2.13.1.1 counter32 read-only
The number of frames transmitted to the link interface by Framer. Note: This does not include the number of frames transmitted directly to the hardware queue, thus bypassing the Framer component.
                       frMuxFramerFrmFromIf 1.3.6.1.4.1.562.2.4.1.112.2.13.1.2 counter32 read-only
The number of frames received from the link interface by Framer.
                       frMuxFramerOctetFromIf 1.3.6.1.4.1.562.2.4.1.112.2.13.1.3 counter32 read-only
The number of bytes received from the link interface by Framer.
                       frMuxFramerAborts 1.3.6.1.4.1.562.2.4.1.112.2.13.1.4 counter32 read-only
This attribute is the total number of aborts received.
                       frMuxFramerCrcErrors 1.3.6.1.4.1.562.2.4.1.112.2.13.1.5 counter32 read-only
This attribute is the total number of frames with CRC errors, occurring in the receive direction from the link.
                       frMuxFramerLrcErrors 1.3.6.1.4.1.562.2.4.1.112.2.13.1.6 counter32 read-only
This attribute is the total number of frames with LRC errors, occurring in the Tx link prior to transmission onto the link.
                       frMuxFramerNonOctetErrors 1.3.6.1.4.1.562.2.4.1.112.2.13.1.7 counter32 read-only
This attribute is the total number of frames that were non octet aligned.
                       frMuxFramerOverruns 1.3.6.1.4.1.562.2.4.1.112.2.13.1.8 counter32 read-only
This attribute is the total number of frames received from the link for which overruns occurred.
                       frMuxFramerUnderruns 1.3.6.1.4.1.562.2.4.1.112.2.13.1.9 counter32 read-only
This attribute is the total number of frames transmitted to the link for which underruns occurred.
                       frMuxFramerLargeFrmErrors 1.3.6.1.4.1.562.2.4.1.112.2.13.1.10 counter32 read-only
This attribute is the total number of frames received which were too large. The frame execeeded the maximumFrameLengthLimit provisioned attribute or it contained more than the 255 block hardware limit.
                       frMuxFramerFrmModeErrors 1.3.6.1.4.1.562.2.4.1.112.2.13.1.11 counter32 read-only
This attribute is the total number of frames detected with framing mode errors. A framingModeError is flagged when frames are inconsistent with the specified framingType, that is when interrupting frames are used while running in hdlc mode.
             frMuxFramerUtilTable 1.3.6.1.4.1.562.2.4.1.112.2.14 no-access
This group contains the link utilizaiton operational data for a Framer component.
                   frMuxFramerUtilEntry 1.3.6.1.4.1.562.2.4.1.112.2.14.1 no-access
An entry in the frMuxFramerUtilTable.
                       frMuxFramerNormPrioLinkUtilToIf 1.3.6.1.4.1.562.2.4.1.112.2.14.1.1 gauge32 read-only
This attribute is the utilization of the normal and high priority data traffic (interruptable traffic) sent to the link as a percentage of the available bandwidth on the link. Note that this includes traffic with Transfer Priorities (TP) of 0, 6 and 9 and/or Emission Priority of 2 and 3. The utilization is the average for the last minute.
                       frMuxFramerNormPrioLinkUtilFromIf 1.3.6.1.4.1.562.2.4.1.112.2.14.1.3 gauge32 read-only
This attribute is the utilization of the normal and high priority data traffic (interruptable traffic) received from the link as a percentage of the available bandwidth on the link. Note that this includes traffic with Transfer Priorities (TP) of 0, 6 and 9 and/or Emission Priority of 2 and 3. The utilization is the average for the last minute.
         frMuxLmi 1.3.6.1.4.1.562.2.4.1.112.3
             frMuxLmiRowStatusTable 1.3.6.1.4.1.562.2.4.1.112.3.1 no-access
This entry controls the addition and deletion of frMuxLmi components.
                 frMuxLmiRowStatusEntry 1.3.6.1.4.1.562.2.4.1.112.3.1.1 no-access
A single entry in the table represents a single frMuxLmi component.
                     frMuxLmiRowStatus 1.3.6.1.4.1.562.2.4.1.112.3.1.1.1 rowstatus read-only
This variable is used as the basis for SNMP naming of frMuxLmi components. These components cannot be added nor deleted.
                     frMuxLmiComponentName 1.3.6.1.4.1.562.2.4.1.112.3.1.1.2 displaystring read-only
This variable provides the component's string name for use with the ASCII Console Interface
                     frMuxLmiStorageType 1.3.6.1.4.1.562.2.4.1.112.3.1.1.4 storagetype read-only
This variable represents the storage type value for the frMuxLmi tables.
                     frMuxLmiIndex 1.3.6.1.4.1.562.2.4.1.112.3.1.1.10 nonreplicated no-access
This variable represents the index for the frMuxLmi tables.
             frMuxLmiProvTable 1.3.6.1.4.1.562.2.4.1.112.3.10 no-access
This group contains the provisionable attributes of the Local Management Interface component of the FrMux. The Local Management Interface of the FrMux is always User Side Procedure of the User Network Interface (USP-UNI).
                   frMuxLmiProvEntry 1.3.6.1.4.1.562.2.4.1.112.3.10.1 no-access
An entry in the frMuxLmiProvTable.
                       frMuxLmiProcedures 1.3.6.1.4.1.562.2.4.1.112.3.10.1.1 integer read-write
This attribute selects the procedures to be used for the Local Management Interface. The following are the supported procedures: none : No Local Management Interface procedure is active. vendorForum : Local Management Interface procedure according to the Vendor Forum specification is active. DLCI 1023 is used for the LMI protocol. ansi: Local Management Interface procedure according to the ANSI specification is active. DLCI 0 is used for the LMI protocol. ccitt: Local Management Interface procedure according to the CCITT specification is active. DLCI 0 is used for the LMI protocol. Enumeration: 'ansi': 2, 'none': 0, 'ccitt': 3, 'vendorForum': 1.
                       frMuxLmiLinkVerificationTimer 1.3.6.1.4.1.562.2.4.1.112.3.10.1.2 unsigned32 read-write
This attribute specifies the time interval (in seconds) at which the FrMux sends Status Enquiry messages to the interface. Exchange of Status Enquiry and Status Report messages constitutes a polling cycle, so this attribute may also be interpreted as time interval at which the FrMux initiates polling cycles. It must be less than checkPointTimer (t392) configured at the other end of the Frame Relay interface. This attribute corresponds to t391 of the ANSI and CCITT specifications, and nT1 of the Vendor Forum specification.
                       frMuxLmiFullStatusPollingCycles 1.3.6.1.4.1.562.2.4.1.112.3.10.1.3 unsigned32 read-write
This attribute specifies every which polling cycle the FrMux sends a full STATUS ENQUIRY to the interface. Every fullStatusPollingCycles polling cycles the FrMux sends a full STATUS ENQUIRY. In all other cycles of a sequence of fullStatusPollingCycles polling cycles the FrMux sends a keep alive STATUS ENQUIRY. This attribute corresponds to n391 of the ANSI and CCITT specifications and nN1 of the Vendor Forum specification.
                       frMuxLmiErrorEventThreshold 1.3.6.1.4.1.562.2.4.1.112.3.10.1.4 unsigned32 read-write
This attribute specifies the number of error events which, if they occur within eventCount events, will cause a protocol error condition (protocolStatus = errorCondition). The error condition is cleared after eventCount sequential correct events occur (protocolStatus = normalCondition). An event is one of the following: (1) expiry of the linkVerificationTimer (t391), (2) reception of a STATUS message. An error event is one of the following: (1)non-receipt of the STATUS message in t391 seconds, (2)invalid STATUS message, (3) invalid sequence number. This attribute corresponds to n392 of the ANSI and CCITT specifications and nN2 of the Vendor Forum Specification. This attribute must be less than or equal to eventCount.
                       frMuxLmiEventCount 1.3.6.1.4.1.562.2.4.1.112.3.10.1.5 unsigned32 read-write
This attribute specifies the number of contiguous events within which no more than eventErrorThreshold error events are allowed. This attribute corresponds to n392 of the ANSI and CCITT specifications and nN3 of the Vendor Forum Specification. This attribute must be greater than or equal to errorEventThreshold.
             frMuxLmiStateTable 1.3.6.1.4.1.562.2.4.1.112.3.11 no-access
This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
                   frMuxLmiStateEntry 1.3.6.1.4.1.562.2.4.1.112.3.11.1 no-access
An entry in the frMuxLmiStateTable.
                       frMuxLmiAdminState 1.3.6.1.4.1.562.2.4.1.112.3.11.1.1 integer read-only
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. Enumeration: 'locked': 0, 'shuttingDown': 2, 'unlocked': 1.
                       frMuxLmiOperationalState 1.3.6.1.4.1.562.2.4.1.112.3.11.1.2 integer read-only
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. Enumeration: 'disabled': 0, 'enabled': 1.
                       frMuxLmiUsageState 1.3.6.1.4.1.562.2.4.1.112.3.11.1.3 integer read-only
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. Enumeration: 'active': 1, 'idle': 0, 'busy': 2.
             frMuxLmiPsiTable 1.3.6.1.4.1.562.2.4.1.112.3.12 no-access
This group provides the protocol status of the Local Management Interface of this FrMux.
                   frMuxLmiPsiEntry 1.3.6.1.4.1.562.2.4.1.112.3.12.1 no-access
An entry in the frMuxLmiPsiTable.
                       frMuxLmiProtocolStatus 1.3.6.1.4.1.562.2.4.1.112.3.12.1.1 integer read-only
This attribute indicates whether the Lmi is in an error condition or whether the protocol is behaving normally. When operating with no LMI protocol (procedures = none), this attribute will always be set to normalCondition. When operating with an LMI protocol (procedures set to one of venforForum, ansi, ccitt), this attribute is set to errorCondition when errorEventThreshold of the last eventCount events are in error. The error condition is cleared when eventCount consecutive good events take place. The consequence of an error condition is that all Dlci's on this interface become disabled and there is no data flow in either direction. Enumeration: 'normalCondition': 1, 'errorCondition': 0.
             frMuxLmiStatsTable 1.3.6.1.4.1.562.2.4.1.112.3.13 no-access
This group contains the operational statistics for the FrMux Local Management Interface.
                   frMuxLmiStatsEntry 1.3.6.1.4.1.562.2.4.1.112.3.13.1 no-access
An entry in the frMuxLmiStatsTable.
                       frMuxLmiKeepAliveStatusEnqToIf 1.3.6.1.4.1.562.2.4.1.112.3.13.1.1 counter32 read-only
This attribute counts the number of keep alive STATUS ENQUIRY messages sent to the interface. When the maximum count is reached it wraps to zero.
                       frMuxLmiFullStatusEnqToIf 1.3.6.1.4.1.562.2.4.1.112.3.13.1.2 counter32 read-only
This attribute counts the number of full STATUS ENQUIRY messages sent to the interface. When the maximum count is reached it wraps to zero.
                       frMuxLmiProtocolErrors 1.3.6.1.4.1.562.2.4.1.112.3.13.1.3 counter32 read-only
This attribute counts the number of Local Management Interface protocol errors. Protocol errors include (1) protocol message format errors, (2) protocol timer expiry errors, and (3) sequence errors. When the maximum count is reached it wraps to zero.
                       frMuxLmiUnexpectedIes 1.3.6.1.4.1.562.2.4.1.112.3.13.1.4 counter32 read-only
This attribute counts the number of frames received with an Information Element identifier that is unknown or unexpected. When the maximum count is reached, this counter wraps to zero.
                       frMuxLmiSequenceErrors 1.3.6.1.4.1.562.2.4.1.112.3.13.1.5 counter32 read-only
This attribute counts the number of Local Management Interface sequence errors. A sequence error is receipt of an LMI message with a receive sequence number not equal to the last send sequence number. When the maximum count is reached the counter wraps to zero.
                       frMuxLmiUnexpectedReports 1.3.6.1.4.1.562.2.4.1.112.3.13.1.6 counter32 read-only
This attribute counts the number of frames received on the Local Management Interface with an unknown or unexpected report type. When the maximum count is reached the counter wraps to zero.
                       frMuxLmiNoStatusReportCount 1.3.6.1.4.1.562.2.4.1.112.3.13.1.7 counter32 read-only
This attribute counts the number of times when no status report or an invalid status report comes from the external network. This attribute is incremented in two cases: i) after a status enquiry is sent out and t391 timer expires without having a status report received. ii) an invalid status report is received. When the maximum count is reached it wraps to zero.
         frMuxDlci 1.3.6.1.4.1.562.2.4.1.112.4
             frMuxDlciRowStatusTable 1.3.6.1.4.1.562.2.4.1.112.4.1 no-access
This entry controls the addition and deletion of frMuxDlci components.
                 frMuxDlciRowStatusEntry 1.3.6.1.4.1.562.2.4.1.112.4.1.1 no-access
A single entry in the table represents a single frMuxDlci component.
                     frMuxDlciRowStatus 1.3.6.1.4.1.562.2.4.1.112.4.1.1.1 rowstatus read-write
This variable is used as the basis for SNMP naming of frMuxDlci components. These components can be added and deleted.
                     frMuxDlciComponentName 1.3.6.1.4.1.562.2.4.1.112.4.1.1.2 displaystring read-only
This variable provides the component's string name for use with the ASCII Console Interface
                     frMuxDlciStorageType 1.3.6.1.4.1.562.2.4.1.112.4.1.1.4 storagetype read-only
This variable represents the storage type value for the frMuxDlci tables.
                     frMuxDlciIndex 1.3.6.1.4.1.562.2.4.1.112.4.1.1.10 integer32 no-access
This variable represents the index for the frMuxDlci tables.
             frMuxDlciApplInfo 1.3.6.1.4.1.562.2.4.1.112.4.2
                 frMuxDlciApplInfoRowStatusTable 1.3.6.1.4.1.562.2.4.1.112.4.2.1 no-access
This entry controls the addition and deletion of frMuxDlciApplInfo components.
                     frMuxDlciApplInfoRowStatusEntry 1.3.6.1.4.1.562.2.4.1.112.4.2.1.1 no-access
A single entry in the table represents a single frMuxDlciApplInfo component.
                         frMuxDlciApplInfoRowStatus 1.3.6.1.4.1.562.2.4.1.112.4.2.1.1.1 rowstatus read-only
This variable is used as the basis for SNMP naming of frMuxDlciApplInfo components. These components cannot be added nor deleted.
                         frMuxDlciApplInfoComponentName 1.3.6.1.4.1.562.2.4.1.112.4.2.1.1.2 displaystring read-only
This variable provides the component's string name for use with the ASCII Console Interface
                         frMuxDlciApplInfoStorageType 1.3.6.1.4.1.562.2.4.1.112.4.2.1.1.4 storagetype read-only
This variable represents the storage type value for the frMuxDlciApplInfo tables.
                         frMuxDlciApplInfoIndex 1.3.6.1.4.1.562.2.4.1.112.4.2.1.1.10 nonreplicated no-access
This variable represents the index for the frMuxDlciApplInfo tables.
                 frMuxDlciApplInfoProvTable 1.3.6.1.4.1.562.2.4.1.112.4.2.11 no-access
This group contains provisionable attributes of this Dlci.
                       frMuxDlciApplInfoProvEntry 1.3.6.1.4.1.562.2.4.1.112.4.2.11.1 no-access
An entry in the frMuxDlciApplInfoProvTable.
                           frMuxDlciApplInfoApplicationName 1.3.6.1.4.1.562.2.4.1.112.4.2.11.1.1 link read-write
This attribute is the link to the application associated with this Dlci.
             frMuxDlciOperTable 1.3.6.1.4.1.562.2.4.1.112.4.10 no-access
This group contains the name of the application associated with this Dlci.
                   frMuxDlciOperEntry 1.3.6.1.4.1.562.2.4.1.112.4.10.1 no-access
An entry in the frMuxDlciOperTable.
                       frMuxDlciApplicationName 1.3.6.1.4.1.562.2.4.1.112.4.10.1.1 rowpointer read-only
This attribute contains the name of the application associated with this Dlci.
             frMuxDlciStateTable 1.3.6.1.4.1.562.2.4.1.112.4.11 no-access
This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
                   frMuxDlciStateEntry 1.3.6.1.4.1.562.2.4.1.112.4.11.1 no-access
An entry in the frMuxDlciStateTable.
                       frMuxDlciAdminState 1.3.6.1.4.1.562.2.4.1.112.4.11.1.1 integer read-only
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. Enumeration: 'locked': 0, 'shuttingDown': 2, 'unlocked': 1.
                       frMuxDlciOperationalState 1.3.6.1.4.1.562.2.4.1.112.4.11.1.2 integer read-only
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. Enumeration: 'disabled': 0, 'enabled': 1.
                       frMuxDlciUsageState 1.3.6.1.4.1.562.2.4.1.112.4.11.1.3 integer read-only
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. Enumeration: 'active': 1, 'idle': 0, 'busy': 2.
             frMuxDlciAbitTable 1.3.6.1.4.1.562.2.4.1.112.4.12 no-access
This group contains the A-Bit status information for this Dlci.
                   frMuxDlciAbitEntry 1.3.6.1.4.1.562.2.4.1.112.4.12.1 no-access
An entry in the frMuxDlciAbitTable.
                       frMuxDlciABitStatusFromIf 1.3.6.1.4.1.562.2.4.1.112.4.12.1.1 integer read-only
This attribute is the most recent A-Bit status received from the interface. Enumeration: 'active': 1, 'inactive': 0.
             frMuxDlciStatsTable 1.3.6.1.4.1.562.2.4.1.112.4.13 no-access
This group contains the operational statistics for the FrMux Dlci.
                   frMuxDlciStatsEntry 1.3.6.1.4.1.562.2.4.1.112.4.13.1 no-access
An entry in the frMuxDlciStatsTable.
                       frMuxDlciFrmToIf 1.3.6.1.4.1.562.2.4.1.112.4.13.1.1 counter32 read-only
This attribute counts the frames sent to the interface. When the maximum count is reached the count wraps to zero.
                       frMuxDlciBytesToIf 1.3.6.1.4.1.562.2.4.1.112.4.13.1.2 passportcounter64 read-only
This attribute counts the bytes sent to the interface. When the maximum count is reached the count wraps to zero.
                       frMuxDlciFrmFromIf 1.3.6.1.4.1.562.2.4.1.112.4.13.1.3 counter32 read-only
This attribute counts the frames received from the interface. Frames that are discarded are not included in this count. When the maximum count is reached the count wraps to zero.
                       frMuxDlciDeFrmFromIf 1.3.6.1.4.1.562.2.4.1.112.4.13.1.4 counter32 read-only
This attribute counts the frames received from the interface with the Discard Eligibility (DE) bit set. When the count reaches maximum it wraps to zero.
                       frMuxDlciBytesFromIf 1.3.6.1.4.1.562.2.4.1.112.4.13.1.5 passportcounter64 read-only
This attribute counts the bytes received from the interface. Frames that are discarded are not included in this count. When the maximum count is reached the count wraps to zero.
                       frMuxDlciDeBytesFromIf 1.3.6.1.4.1.562.2.4.1.112.4.13.1.6 passportcounter64 read-only
This attribute counts the bytes received from the interface with the Discard Eligibility (DE) bit set. When the count reaches maximum it wraps to zero.
                       frMuxDlciFecnFrmToIf 1.3.6.1.4.1.562.2.4.1.112.4.13.1.7 counter32 read-only
This attribute counts the frames sent to the interface with the Forward Explicit Congestion Notification (FECN) bit set. When the count reaches maximum it wraps to zero.
                       frMuxDlciFecnFrmFromIf 1.3.6.1.4.1.562.2.4.1.112.4.13.1.8 counter32 read-only
This attribute counts the frames received from the interface with the Forward Explicit Congestion Notification (FECN) bit set. When the count reaches maximum it wraps to zero.
                       frMuxDlciBecnFrmToIf 1.3.6.1.4.1.562.2.4.1.112.4.13.1.9 counter32 read-only
This attribute counts the frames sent to the interface with the Backward Explicit Congestion Notification (BECN) bit set. When the count reaches maximum it wraps to zero.
                       frMuxDlciBecnFrmFromIf 1.3.6.1.4.1.562.2.4.1.112.4.13.1.10 counter32 read-only
This attribute counts the frames received from the interface with the Backward Explicit Congestion Notification (BECN) bit set. When the count reaches maximum it wraps to zero.
                       frMuxDlciDiscCongestedFromIf 1.3.6.1.4.1.562.2.4.1.112.4.13.1.11 counter32 read-only
This attribute counts the number of frames discarded in the receive direction due to local congestion. When this count reaches maximum, it wraps to zero.
                       frMuxDlciDiscCongestedFromIfBytes 1.3.6.1.4.1.562.2.4.1.112.4.13.1.12 counter32 read-only
This attribute counts the number of bytes discarded in the receive direction due to local congestion. When this count reaches maximum, it wraps to zero.
                       frMuxDlciDiscDeCongestedFromIf 1.3.6.1.4.1.562.2.4.1.112.4.13.1.13 counter32 read-only
This attribute counts the number of discard eligible (DE=1) frames discarded in the receive direction due to local congestion. When this count reaches maximum, it wraps to zero.
                       frMuxDlciDiscDeCongestedFromIfBytes 1.3.6.1.4.1.562.2.4.1.112.4.13.1.14 counter32 read-only
This attribute counts the number of bytes of discard eligible (DE=1) traffic discarded in the receive direction due to local congestion. When the maximum count is reached the count wraps to zero.
                       frMuxDlciErrorShortFrmFromIf 1.3.6.1.4.1.562.2.4.1.112.4.13.1.15 counter32 read-only
This attribute counts the frames received with 0 octets in the information field. When the count reaches maximum it wraps to zero.
                       frMuxDlciErrorLongFrmFromIf 1.3.6.1.4.1.562.2.4.1.112.4.13.1.16 counter32 read-only
This attribute counts the frames received with number of octets in the information field greater than the maximum frame size provisioned in the component pointed to by the applicationName. When the count reaches maximum it wraps to zero. Frames whose lengths are greater than the hardware receive buffer are discarded by the Framer and are therefore not included in this count.
         frMuxOperStatusTable 1.3.6.1.4.1.562.2.4.1.112.8 no-access
This group includes the Operational Status attribute. This attribute defines the current operational state of this component.
             frMuxOperStatusEntry 1.3.6.1.4.1.562.2.4.1.112.8.1 no-access
An entry in the frMuxOperStatusTable.
                 frMuxSnmpOperStatus 1.3.6.1.4.1.562.2.4.1.112.8.1.1 integer read-only
The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed. Enumeration: 'down': 2, 'testing': 3, 'up': 1.
         frMuxIfEntryTable 1.3.6.1.4.1.562.2.4.1.112.9 no-access
This group contains the provisionable attributes for the ifEntry.
             frMuxIfEntryEntry 1.3.6.1.4.1.562.2.4.1.112.9.1 no-access
An entry in the frMuxIfEntryTable.
                 frMuxIfAdminStatus 1.3.6.1.4.1.562.2.4.1.112.9.1.1 integer read-write
The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed. Enumeration: 'down': 2, 'testing': 3, 'up': 1.
                 frMuxIfIndex 1.3.6.1.4.1.562.2.4.1.112.9.1.2 interfaceindex read-only
This is the index for the IfEntry. Its value is automatically initialized during the provisioning process.
         frMuxCidDataTable 1.3.6.1.4.1.562.2.4.1.112.10 no-access
This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs.
               frMuxCidDataEntry 1.3.6.1.4.1.562.2.4.1.112.10.1 no-access
An entry in the frMuxCidDataTable.
                   frMuxCustomerIdentifier 1.3.6.1.4.1.562.2.4.1.112.10.1.1 unsigned32 read-write
This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers.
         frMuxStateTable 1.3.6.1.4.1.562.2.4.1.112.11 no-access
This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241- 7001-150, Passport Operations and Maintenance Guide.
               frMuxStateEntry 1.3.6.1.4.1.562.2.4.1.112.11.1 no-access
An entry in the frMuxStateTable.
                   frMuxAdminState 1.3.6.1.4.1.562.2.4.1.112.11.1.1 integer read-only
This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component. Enumeration: 'locked': 0, 'shuttingDown': 2, 'unlocked': 1.
                   frMuxOperationalState 1.3.6.1.4.1.562.2.4.1.112.11.1.2 integer read-only
This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component. Enumeration: 'disabled': 0, 'enabled': 1.
                   frMuxUsageState 1.3.6.1.4.1.562.2.4.1.112.11.1.3 integer read-only
This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component. Enumeration: 'active': 1, 'idle': 0, 'busy': 2.
                   frMuxAvailabilityStatus 1.3.6.1.4.1.562.2.4.1.112.11.1.4 octet string read-only
If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value inTest indicates that the resource is undergoing a test procedure. If adminState is locked or shuttingDown, the normal users are precluded from using the resource and controlStatus is reservedForTest. Tests that do not exclude additional users can be present in any operational or administrative state but the reservedForTest condition should not be present. The value failed indicates that the component has an internal fault that prevents it from operating. The operationalState is disabled. The value dependency indicates that the component cannot operate because some other resource on which it depends is unavailable. The operationalState is disabled. The value powerOff indicates the resource requires power to be applied and it is not powered on. The operationalState is disabled. The value offLine indicates the resource requires a routine operation (either manual, automatic, or both) to be performed to place it on-line and make it available for use. The operationalState is disabled. The value offDuty indicates the resource is inactive in accordance with a predetermined time schedule. In the absence of other disabling conditions, the operationalState is enabled or disabled. The value degraded indicates the service provided by the component is degraded in some way, such as in speed or operating capacity. However, the resource remains available for service. The operationalState is enabled. The value notInstalled indicates the resource is not present. The operationalState is disabled. The value logFull is not used. Description of bits: inTest(0) failed(1) powerOff(2) offLine(3) offDuty(4) dependency(5) degraded(6) notInstalled(7) logFull(8)
                   frMuxProceduralStatus 1.3.6.1.4.1.562.2.4.1.112.11.1.5 octet string read-only
If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value initializationRequired indicates (for a resource which doesn't initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState is disabled. The value notInitialized indicates (for a resource which does initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState may be enabled or disabled. The value initializing indicates that initialization has been initiated but is not yet complete. The operationalState may be enabled or disabled. The value reporting indicates the resource has completed some processing operation and is notifying the results. The operationalState is enabled. The value terminating indicates the component is in a termination phase. If the resource doesn't reinitialize autonomously, operationalState is disabled; otherwise it is enabled or disabled. Description of bits: initializationRequired(0) notInitialized(1) initializing(2) reporting(3) terminating(4)
                   frMuxControlStatus 1.3.6.1.4.1.562.2.4.1.112.11.1.6 octet string read-only
If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value subjectToTest indicates the resource is available but tests may be conducted simultaneously at unpredictable times, which may cause it to exhibit unusual characteristics. The value partOfServicesLocked indicates that part of the service is restricted from users of a resource. The adminState is unlocked. The value reservedForTest indicates that the component is administratively unavailable because it is undergoing a test procedure. The adminState is locked. The value suspended indicates that the service has been administratively suspended. Description of bits: subjectToTest(0) partOfServicesLocked(1) reservedForTest(2) suspended(3)
                   frMuxAlarmStatus 1.3.6.1.4.1.562.2.4.1.112.11.1.7 octet string read-only
If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value underRepair indicates the component is currently being repaired. The operationalState is enabled or disabled. The value critical indicates one or more critical alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value major indicates one or more major alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value minor indicates one or more minor alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value alarmOutstanding generically indicates that an alarm of some severity is outstanding against the component. Description of bits: underRepair(0) critical(1) major(2) minor(3) alarmOutstanding(4)
                   frMuxStandbyStatus 1.3.6.1.4.1.562.2.4.1.112.11.1.8 integer read-only
If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not supported or that none of the status conditions described below are present. Note that this is a non-standard value, used because the original specification indicated this attribute was set-valued and thus, did not provide a value to indicate that none of the other three are applicable. The value hotStandby indicates that the resource is not providing service but will be immediately able to take over the role of the resource to be backed up, without initialization activity, and containing the same information as the resource to be backed up. The value coldStandby indicates the resource is a backup for another resource but will not be immediately able to take over the role of the backed up resource and will require some initialization activity. The value providingService indicates that this component, as a backup resource, is currently backing up another resource. Enumeration: 'notSet': 15, 'coldStandby': 1, 'hotStandby': 0, 'providingService': 2.
                   frMuxUnknownStatus 1.3.6.1.4.1.562.2.4.1.112.11.1.9 integer read-only
This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be considered accurate. The value true indicates that the actual state of the component is not known for sure. Enumeration: 'true': 1, 'false': 0.
         frMuxStatsTable 1.3.6.1.4.1.562.2.4.1.112.12 no-access
This group contains the statistics about the operational behavior of the FrMux at the interface level.
               frMuxStatsEntry 1.3.6.1.4.1.562.2.4.1.112.12.1 no-access
An entry in the frMuxStatsTable.
                   frMuxLastUnknownDlci 1.3.6.1.4.1.562.2.4.1.112.12.1.1 unsigned32 read-only
This attribute identifies the most recent DLCI which user frames were received on, for which a Dlci has not been provisioned on the interface.
                   frMuxUnknownDlciFramesFromIf 1.3.6.1.4.1.562.2.4.1.112.12.1.2 counter32 read-only
This attribute counts frames received from the interface with an unknown DLCI (Dlci which is not provisioned). When the maximum is reached the count wraps to zero.
                   frMuxInvalidHeaderFramesFromIf 1.3.6.1.4.1.562.2.4.1.112.12.1.3 counter32 read-only
This attribute counts the number of frames received from the interface with an invalid header format. When the maximum is reached the count wraps to zero.
                   frMuxTimeFramerCongested 1.3.6.1.4.1.562.2.4.1.112.12.1.4 counter32 read-only
This attribute accumulates the time (in msec) during which Framer congestion has been observed in the direction towards the interface. The overload causing this statistic to increase may be caused by oversubscription. When this count reaches maximum, it wraps to zero.
 frameRelayMuxMIB 1.3.6.1.4.1.562.2.4.2.38
       frameRelayMuxGroup 1.3.6.1.4.1.562.2.4.2.38.1
           frameRelayMuxGroupBE 1.3.6.1.4.1.562.2.4.2.38.1.5
               frameRelayMuxGroupBE00 1.3.6.1.4.1.562.2.4.2.38.1.5.1
                   frameRelayMuxGroupBE00A 1.3.6.1.4.1.562.2.4.2.38.1.5.1.2
       frameRelayMuxCapabilities 1.3.6.1.4.1.562.2.4.2.38.3
           frameRelayMuxCapabilitiesBE 1.3.6.1.4.1.562.2.4.2.38.3.5
               frameRelayMuxCapabilitiesBE00 1.3.6.1.4.1.562.2.4.2.38.3.5.1
                   frameRelayMuxCapabilitiesBE00A 1.3.6.1.4.1.562.2.4.2.38.3.5.1.2