Netrake-MIB: View SNMP OID List / Download MIB

VENDOR: NETRAKE CORPORATION

Home	MIB: Netrake-MIB
Download as:		SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC		Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash). Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded. The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.

Object Name	OID	Type	Access	Info
org	1.3
dod	1.3.6
internet	1.3.6.1
private	1.3.6.1.4
enterprises	1.3.6.1.4.1
netrake	1.3.6.1.4.1.10950			nCite MIB
products	1.3.6.1.4.1.10950.1
nCite	1.3.6.1.4.1.10950.1.1
chassis	1.3.6.1.4.1.10950.1.1.1
chasGen	1.3.6.1.4.1.10950.1.1.1.1
chasSerNum	1.3.6.1.4.1.10950.1.1.1.1.1	displaystring	read-only	Serial number of the chassis
chasLedStatus	1.3.6.1.4.1.10950.1.1.1.1.2	integer32	read-only	Bit array that contains the chassis LED status
chasPOSTMode	1.3.6.1.4.1.10950.1.1.1.1.3	integer	read-write	Used to set the mode of the power on self test; Currently not supported. Enumeration: 'fastPOST': 0, 'fullPost': 1.
chasType	1.3.6.1.4.1.10950.1.1.1.1.4	integer	read-only	Description Enumeration: 'sff': 2, 'unknown': 0, 'bff': 1.
chasPwr	1.3.6.1.4.1.10950.1.1.1.2
chasPwrSupplyTable	1.3.6.1.4.1.10950.1.1.1.2.1		no-access	Table of power supplies
chasPwrSupplyEntry	1.3.6.1.4.1.10950.1.1.1.2.1.1		no-access	Row Description
chasPwrSupplyIndex	1.3.6.1.4.1.10950.1.1.1.2.1.1.1	integer32	read-only	Index to the power supply table
chasPwrSupplyOperStatus	1.3.6.1.4.1.10950.1.1.1.2.1.1.2	integer	read-only	Column Description Enumeration: 'unknown': 1, 'notPresent': 4, 'fault': 3, 'normal': 2.
chasPwrSupplyDesc	1.3.6.1.4.1.10950.1.1.1.2.1.1.3	displaystring	read-only	Description of power supply
chasPwrTrap	1.3.6.1.4.1.10950.1.1.1.2.2			This trap is sent whenever the status of a power supply changes
chasPwrTrapAck	1.3.6.1.4.1.10950.1.1.1.2.3	integer	read-write	Chase power trap acknowledge flag Enumeration: 'ack': 1, 'notAck': 0.
chasPwrTrapAckSource	1.3.6.1.4.1.10950.1.1.1.2.4	ipaddress	read-write	Identifies the Snmp Manager which sets the trap ack.
chasFan	1.3.6.1.4.1.10950.1.1.1.3
chasFanTable	1.3.6.1.4.1.10950.1.1.1.3.1		no-access	Table contains the list of fans
chasFanEntry	1.3.6.1.4.1.10950.1.1.1.3.1.1		no-access	Row Description
chasFanIndex	1.3.6.1.4.1.10950.1.1.1.3.1.1.1	integer32	read-only	Column Description
chasFanOperStatus	1.3.6.1.4.1.10950.1.1.1.3.1.1.2	integer	read-only	Operational status of the fan Enumeration: 'dev_ok': 0, 'dev_not_present': 3, 'dev_present': 2, 'dev_fail': 1, 'unknown': 4.
chasFanDescription	1.3.6.1.4.1.10950.1.1.1.3.1.1.3	displaystring	read-only	Description of fan
chasFanTrap	1.3.6.1.4.1.10950.1.1.1.3.2			This trap is sent whenever the status of a fan changes
chasFanTrapAck	1.3.6.1.4.1.10950.1.1.1.3.3	integer	read-write	Chase fan trap acknowledge flag Enumeration: 'ack': 1, 'notAck': 0.
chasFanTrapAckSource	1.3.6.1.4.1.10950.1.1.1.3.4	ipaddress	read-write	Identifies the Snmp Manager which sets the trap ack.
chasBrd	1.3.6.1.4.1.10950.1.1.1.4
chasBrdTable	1.3.6.1.4.1.10950.1.1.1.4.1		no-access	Table containing the description of each board present in the chassis
chasBrdEntry	1.3.6.1.4.1.10950.1.1.1.4.1.1		no-access	Row Description
chasBrdSlotNum	1.3.6.1.4.1.10950.1.1.1.4.1.1.1	integer32	read-only	Starting slot number of the board
chasBrdDescription	1.3.6.1.4.1.10950.1.1.1.4.1.1.2	displaystring	read-only	Description of the board
chasBrdType	1.3.6.1.4.1.10950.1.1.1.4.1.1.3	integer	read-only	Board type Enumeration: 'controlProc': 2, 'noBoardPresent': 0, 'fastEther': 5, 'managementProc': 1, 'netrakeControlProcessor': 3, 'gigE': 4.
chasBrdOccSlots	1.3.6.1.4.1.10950.1.1.1.4.1.1.4	integer32	read-only	Number of slots that the board occupies
chasBrdMaxPorts	1.3.6.1.4.1.10950.1.1.1.4.1.1.5	integer32	read-only	Number of ports that the card supports
chasBrdSlotLabel	1.3.6.1.4.1.10950.1.1.1.4.1.1.6	displaystring	read-only	Label on the chassis
chasBrdStatusLeds	1.3.6.1.4.1.10950.1.1.1.4.1.1.7	integer32	read-only	Bit-map that contains the value of the front panel LEDS.
chasBrdState	1.3.6.1.4.1.10950.1.1.1.4.1.1.8	displaystring	read-only	Board state
chasBrdPwr	1.3.6.1.4.1.10950.1.1.1.4.1.1.9	integer	read-write	Is used to power on and off line cards and indicates power state of board Enumeration: 'default': 0, 'powerOff': 2, 'powerOn': 1.
chasBrdIfIndex	1.3.6.1.4.1.10950.1.1.1.4.1.1.10	integer32	read-only	This is the value of the index to the IF table of the first port of the line card
chasBrdSerialNum	1.3.6.1.4.1.10950.1.1.1.4.1.1.11	displaystring	read-only	Serial number of the board
chasBrdReset	1.3.6.1.4.1.10950.1.1.1.4.1.1.12	integer	read-write	This OID is set when the nCite is commanded to perform a board reset Enumeration: 'default': 0, 'resetCold': 1, 'resetWarm': 2.
chasBrdStateChangeTrap	1.3.6.1.4.1.10950.1.1.1.4.2			This trap is sent when the state of line card changes state
chasBrdStateChangeTrapAck	1.3.6.1.4.1.10950.1.1.1.4.3	integer	read-write	Chase board state change trap acknowledge flag Enumeration: 'ack': 1, 'notAck': 0.
chasBrdStateChangeTrapAckSource	1.3.6.1.4.1.10950.1.1.1.4.4	ipaddress	read-write	Identifies the Snmp Manager which sets the trap ack.
nCiteSystem	1.3.6.1.4.1.10950.1.1.2
resourceUsageTable	1.3.6.1.4.1.10950.1.1.2.1		no-access	Description
resourceUsageEntry	1.3.6.1.4.1.10950.1.1.2.1.1		no-access	Row Description
processorIndex	1.3.6.1.4.1.10950.1.1.2.1.1.1	integer	read-only	There are three processors. This table contains the resource usage for each processor Enumeration: 'controlProcB': 3, 'controlProcA': 2, 'managementProc': 1.
memTotal	1.3.6.1.4.1.10950.1.1.2.1.1.2	integer32	read-only	Total amount of memory available.
memUsed	1.3.6.1.4.1.10950.1.1.2.1.1.3	integer32	read-only	This is the percentage of memory in use at the time that the value is requested.
cpuUsage	1.3.6.1.4.1.10950.1.1.2.1.1.4	integer32	read-only	This is the amount of CPU in use at the time this value is requested.
systemSoftwareVersion	1.3.6.1.4.1.10950.1.1.2.2	displaystring	read-only	Software Version of the nCite
systemRestoreFlag	1.3.6.1.4.1.10950.1.1.2.3	integer	read-write	Tells the EMS whether to push or pull the configuration. If the value is default(0) then the EMS pulls. If the value is restore(1) then the EMS pushes. Enumeration: 'outOfSync': 1, 'refreshStarted': 2, 'normal': 0.
systemOperState	1.3.6.1.4.1.10950.1.1.2.4	displaystring	read-only	Operational state of the nCite
systemAdminState	1.3.6.1.4.1.10950.1.1.2.5	integer	read-write	Administrative state of the nCite. Disabling the nCite stops all traffic from passing through the box. Enumeration: 'enable': 1, 'disable': 2.
systemOperStateChangeTrap	1.3.6.1.4.1.10950.1.1.2.6			This trap is sent when the operational state of the nCite changes.
systemOperStateChangeTrapAck	1.3.6.1.4.1.10950.1.1.2.7	integer	read-write	System operation state change trap flag Enumeration: 'ack': 1, 'notAck': 0.
systemOperStateChangeTrapAckSource	1.3.6.1.4.1.10950.1.1.2.8	ipaddress	read-write	Identifies the Snmp Manager which sets the trap ack.
systemTrapAckTable	1.3.6.1.4.1.10950.1.1.2.9		no-access	Table of SNMP Mgrs that are sending acknowledgements
systemTrapAckEntry	1.3.6.1.4.1.10950.1.1.2.9.1		no-access	Row Description
systemSnmpMgrIpAddress	1.3.6.1.4.1.10950.1.1.2.9.1.1	ipaddress	read-only	IP address of SNMP Mgr that is sending Acks for traps
systemTrapNoAck	1.3.6.1.4.1.10950.1.1.2.9.1.2	integer	read-write	When trap is not acknowledges the value get set to ackNoReceived; EMS will set to OK upon refresh. Enumeration: 'ackNotReceived': 1, 'ok': 0.
alarm	1.3.6.1.4.1.10950.1.1.3
activeAlarmTable	1.3.6.1.4.1.10950.1.1.3.1		no-access	Description
activeAlarmEntry	1.3.6.1.4.1.10950.1.1.3.1.1		no-access	Row Description
activeAlarmIndex	1.3.6.1.4.1.10950.1.1.3.1.1.1	integer32	read-only	Index into table for a specific alarm instance can change
activeAlarmId	1.3.6.1.4.1.10950.1.1.3.1.1.2	integer32	read-only	Unique identifier assigned to aninstance of an alarm.
activeAlarmType	1.3.6.1.4.1.10950.1.1.3.1.1.3	integer32	read-only	Unique identifier associated with the alarm description
activeAlarmServiceAffecting	1.3.6.1.4.1.10950.1.1.3.1.1.4	integer	read-only	Indicates whether the alarm is service affecting Enumeration: 'notServiceAffecting': 1, 'serviceAffecting': 2.
activeAlarmCategory	1.3.6.1.4.1.10950.1.1.3.1.1.5	integer	read-only	Categorizes the alarm into a class of alarms Enumeration: 'hardware': 1, 'service': 3, 'software': 2.
activeAlarmTimeStamp	1.3.6.1.4.1.10950.1.1.3.1.1.6	dateandtime	read-only	Date and time that the alarm condition is detected
activeAlarmSlotNum	1.3.6.1.4.1.10950.1.1.3.1.1.7	integer32	read-only	Slot number of the card that has the condition being alarmed
activeAlarmPortNum	1.3.6.1.4.1.10950.1.1.3.1.1.8	integer32	read-only	If condition is against a port, this will hold the port number. Otherwise it will be defaulted to 0.
activeAlarmSysUpTime	1.3.6.1.4.1.10950.1.1.3.1.1.9	timeticks	read-only	Value of system up time as reported in MIBII at the time that the condition began
activeAlarmDevType	1.3.6.1.4.1.10950.1.1.3.1.1.10	integer	read-only	Description Enumeration: 'controlProc': 2, 'oc12': 8, 'chassisFan': 6, 'fastEther': 5, 'managementProc': 1, 'netrakeControlProcessor': 3, 'chassisPowerSupply': 7, 'unknown': 0, 'gigE': 4.
activeAlarmAdditionalInfo	1.3.6.1.4.1.10950.1.1.3.1.1.11	displaystring	read-only	Additional information to be included in the alarm description
activeAlarmOccurances	1.3.6.1.4.1.10950.1.1.3.1.1.12	integer32	read-only	Number of times the condition has re-occurred since it was originated
acitveAlarmReportingSource	1.3.6.1.4.1.10950.1.1.3.1.1.13	integer32	read-only	This has been deprecated
activeAlarmSeverity	1.3.6.1.4.1.10950.1.1.3.1.1.14	integer	read-only	Severity of the alarm Enumeration: 'info': 6, 'major': 2, 'unknown': 0, 'clear': 5, 'critical': 1, 'warning': 4, 'minor': 3.
activeAlarmDisplayString	1.3.6.1.4.1.10950.1.1.3.1.1.15	displaystring	read-only	Description of the alarm to be used to display on the GUI
activeAlarmSubType	1.3.6.1.4.1.10950.1.1.3.1.1.16	integer32	read-only	Sub-type is used to distinguish alarms by a separate criteria such as customer ID or policy ID
activeAlarmEventFlag	1.3.6.1.4.1.10950.1.1.3.1.1.17	integer	read-only	Description Enumeration: 'alarm': 1, 'event': 2.
histEvent	1.3.6.1.4.1.10950.1.1.3.2
postAlarm	1.3.6.1.4.1.10950.1.1.3.3			This notification is sent when an alarm becomes active
postEvent	1.3.6.1.4.1.10950.1.1.3.4
activeAlarmAcknowledge	1.3.6.1.4.1.10950.1.1.3.5	integer	read-write	Value is set to acknowledged by the EMS when the alarm is received. It is set back to cleared by the agent Enumeration: 'cleared': 0, 'acknowledge': 1.
activeAlarmID	1.3.6.1.4.1.10950.1.1.3.6	integer32	read-write	Alarm ID of the alarm being acknowledged
eventAcknowledge	1.3.6.1.4.1.10950.1.1.3.7
eventID	1.3.6.1.4.1.10950.1.1.3.8	integer32	read-write	Event ID for the event that is being acknowledged
activeAlarmAcknowledgeSource	1.3.6.1.4.1.10950.1.1.3.9	ipaddress	read-write	Identifies the Snmp Manager which sets the alarm ack.
switchNotifications	1.3.6.1.4.1.10950.1.1.4
coldStartTrapEnable	1.3.6.1.4.1.10950.1.1.4.1	integer	read-write	Is used to disable the cold start trap Enumeration: 'enable': 1, 'disable': 2.
coldStartTrap	1.3.6.1.4.1.10950.1.1.4.2			This trap is sent if trap is enabled when the Management Processor comes up from a cold start
coldStartTrapAck	1.3.6.1.4.1.10950.1.1.4.3	integer	read-write	Cold start trap acknowledge flag Enumeration: 'ack': 1, 'notAck': 0.
coldStartTrapAckSource	1.3.6.1.4.1.10950.1.1.4.4	ipaddress	read-write	Identifies the Snmp Manager which sets the trap ack.
nCiteRedundant	1.3.6.1.4.1.10950.1.1.5
redundantPort1IpAddr	1.3.6.1.4.1.10950.1.1.5.1	ipaddress	read-write	IP address of the redundant port of the nCite MP
redundantPort2IpAddr	1.3.6.1.4.1.10950.1.1.5.2	ipaddress	read-write	Redundant port 2 IP address for the nCite MP
redundantAdminState	1.3.6.1.4.1.10950.1.1.5.3	integer	read-write	Administrative state for redundancy. Enumeration: 'redundant': 2, 'standAlone': 1.
redundantMateName	1.3.6.1.4.1.10950.1.1.5.4	displaystring	read-write	The name of the redundant nCite. This will be the chassis serial number when redundancy is enabled. If redundancy is not configured, then this field will be blank.
redundantConfigChangeTrapAck	1.3.6.1.4.1.10950.1.1.5.6	integer	read-write	Redundant config change trap acknowledge flag Enumeration: 'ack': 1, 'notAck': 0.
redundantConfigChangeTrap	1.3.6.1.4.1.10950.1.1.5.7			This trap is sent whenever the redundant configuration is modified
redundantPort1NetMask	1.3.6.1.4.1.10950.1.1.5.8	ipaddress	read-write	Net mask
redundantPort2NetMask	1.3.6.1.4.1.10950.1.1.5.9	ipaddress	read-write	Net mask
redundantFailbackThresh	1.3.6.1.4.1.10950.1.1.5.10	integer32	read-write	Failback threshold
redundantRedirectorFlag	1.3.6.1.4.1.10950.1.1.5.11	integer	read-write	When set to enable(1), the nCite supports load balancing on equal cost routes Enumeration: 'disabled': 0, 'enabled': 1.
redundantFailbackThreshChangeTrap	1.3.6.1.4.1.10950.1.1.5.12			This trap is sent whenever the failback threshold is modified
redundantFailbackThreshChangeTrapAck	1.3.6.1.4.1.10950.1.1.5.13	integer	read-write	This value is set to acknowledge the redundant failback threshold change trap Enumeration: 'default': 0, 'ack': 1.
redundantRedirectorFlagChangeTrap	1.3.6.1.4.1.10950.1.1.5.14			This trap is sent whenever the redirector flag is changed
redundantRedirectorFlagChangeTrapAck	1.3.6.1.4.1.10950.1.1.5.15	integer	read-write	Used to acknowledge the redirector flag change trap Enumeration: 'default': 0, 'ack': 1.
redundantAutoFailbackFlag	1.3.6.1.4.1.10950.1.1.5.16	integer	read-write	When set to enable(1), the nCite supports automatic failback Enumeration: 'disabled': 0, 'enabled': 1.
redundantAutoFailbackChangeTrap	1.3.6.1.4.1.10950.1.1.5.17			This trap is sent whenever the automatic failback flag is changed
redundantAutoFailbackFlagChangeTrapAck	1.3.6.1.4.1.10950.1.1.5.18	integer	read-write	Used to acknowledge the automatic failback flag change trap Enumeration: 'default': 0, 'ack': 1.
redundantConfigChangeTrapAckSource	1.3.6.1.4.1.10950.1.1.5.19	ipaddress	read-write	Identifies the Snmp Manager which sets the trap ack.
redundantFailbackThreshChangeTrapAckSource	1.3.6.1.4.1.10950.1.1.5.20	ipaddress	read-write	Identifies the Snmp Manager which sets the trap ack flag.
redundantRedirectorFlagChangeTrapAckSource	1.3.6.1.4.1.10950.1.1.5.21	ipaddress	read-write	Identifies the Snmp Manager which sets the trap ack.
redundantAutoFailbackFlagChangeTrapAckSource	1.3.6.1.4.1.10950.1.1.5.22	ipaddress	read-write	Identifies the Snmp Manager which sets the trap ack.
nCiteStats	1.3.6.1.4.1.10950.1.1.6
globalCounters	1.3.6.1.4.1.10950.1.1.6.1
totalPacketsXmitCPA	1.3.6.1.4.1.10950.1.1.6.1.1	counter64	read-only	Total number of packets transmitted by CP side A
numPacketsDiscardCPA	1.3.6.1.4.1.10950.1.1.6.1.2	counter64	read-only	Number of packets discarded by CP side A
totalPacketsXmitCPB	1.3.6.1.4.1.10950.1.1.6.1.3	counter64	read-only	Total number of packets transmitted by CP side B
numPacketsDiscardCPB	1.3.6.1.4.1.10950.1.1.6.1.4	counter64	read-only	Number of packets discarded by CP side B
totalPacketsXmit	1.3.6.1.4.1.10950.1.1.6.1.5	counter64	read-only	This counter applies to nCites that do not have 'sides'
totalPacketsDiscard	1.3.6.1.4.1.10950.1.1.6.1.6	counter64	read-only	This counter applies to nCites that do have have 'sides'
gigEStats	1.3.6.1.4.1.10950.1.1.6.2
gigEStatsTable	1.3.6.1.4.1.10950.1.1.6.2.1		no-access	Table containing the counters available for every gigE card in the nCite.
gigEStatsEntry	1.3.6.1.4.1.10950.1.1.6.2.1.1		no-access	Row Description
gigEStatsPortIndex	1.3.6.1.4.1.10950.1.1.6.2.1.1.1	integer32	read-only	Index to table
gigEStatsSlotNum	1.3.6.1.4.1.10950.1.1.6.2.1.1.2	integer32	read-only	Slot number of gigE line card that the statistics correspond
linkStatusChanges	1.3.6.1.4.1.10950.1.1.6.2.1.1.3	counter64	read-only	Total number of link status changes
framesRcvdOkCount	1.3.6.1.4.1.10950.1.1.6.2.1.1.4	counter64	read-only	Total number of good frames received
octetsRcvdOkCount	1.3.6.1.4.1.10950.1.1.6.2.1.1.5	counter64	read-only	Total number of good octets received
framesRcvdCount	1.3.6.1.4.1.10950.1.1.6.2.1.1.6	counter64	read-only	Total number of frames received
octetsRcvdCount	1.3.6.1.4.1.10950.1.1.6.2.1.1.7	counter64	read-only	Total number of octets received
frameSeqErrCount	1.3.6.1.4.1.10950.1.1.6.2.1.1.8	counter64	read-only	Total number of frame sequence errors
lostFramesMacErrCount	1.3.6.1.4.1.10950.1.1.6.2.1.1.9	counter64	read-only	Total number of frames lost due to internal MAX errors
rcvdFrames64Octets	1.3.6.1.4.1.10950.1.1.6.2.1.1.10	counter64	read-only	Description
octetsRcvd1519toMax	1.3.6.1.4.1.10950.1.1.6.2.1.1.11	counter64	read-only	Description
xmitFrames64Octets	1.3.6.1.4.1.10950.1.1.6.2.1.1.12	counter64	read-only	Description
octetsXmit1024to1518	1.3.6.1.4.1.10950.1.1.6.2.1.1.13	counter64	read-only	Description
octetsXmitCount	1.3.6.1.4.1.10950.1.1.6.2.1.1.14	counter64	read-only	Number of octets transmitted on the physical port
unicastFramesXmitOk	1.3.6.1.4.1.10950.1.1.6.2.1.1.15	counter64	read-only	Number of unicast frames transmitted OK on the physical port
unicastFramesRcvdOk	1.3.6.1.4.1.10950.1.1.6.2.1.1.16	counter64	read-only	Unicast Frames Received OK
broadcastFramesXmitOk	1.3.6.1.4.1.10950.1.1.6.2.1.1.17	counter64	read-only	Broadcast Frames Transmitted OK
broadcastFramesRcvdOk	1.3.6.1.4.1.10950.1.1.6.2.1.1.18	counter64	read-only	Broadcast Frames Received OK
multicastFramesXmitOk	1.3.6.1.4.1.10950.1.1.6.2.1.1.19	counter64	read-only	Multicast Frames tranmistted OK
multicastFramesRcvdOk	1.3.6.1.4.1.10950.1.1.6.2.1.1.20	counter64	read-only	Multicast Frames Received OK
octetsRcvd65to127	1.3.6.1.4.1.10950.1.1.6.2.1.1.21	counter64	read-only	65 To 127 Octet Frames Received
octetsXmit65to127	1.3.6.1.4.1.10950.1.1.6.2.1.1.22	counter64	read-only	128 To 255 Octet Frames Transmitted
octetRcvd128to255	1.3.6.1.4.1.10950.1.1.6.2.1.1.23	counter64	read-only	128 To 255 Octet Frames Received
octetsXmit128to255	1.3.6.1.4.1.10950.1.1.6.2.1.1.24	counter64	read-only	128 To 255 Octet Frames Transmitted
octetsRcvd256to511	1.3.6.1.4.1.10950.1.1.6.2.1.1.25	counter64	read-only	Description 256 To 511 Octet Frames Received
octetsXmit256to511	1.3.6.1.4.1.10950.1.1.6.2.1.1.26	counter64	read-only	256 To 511 Octet Frames Transmitted
octetsRcvd512to1023	1.3.6.1.4.1.10950.1.1.6.2.1.1.27	counter64	read-only	512 To 1023 Octet Frames Received
octetsXmit512to1023	1.3.6.1.4.1.10950.1.1.6.2.1.1.28	counter64	read-only	512 To 1023 Octet Frames Transmitted
octetsRcvd1024to1518	1.3.6.1.4.1.10950.1.1.6.2.1.1.29	counter64	read-only	1024 To 1518 Octet Frames Received
octetsXmit1519toMax	1.3.6.1.4.1.10950.1.1.6.2.1.1.30	counter64	read-only	1519 To Max Octed Frames Transmitted
underSizeFramesRcvd	1.3.6.1.4.1.10950.1.1.6.2.1.1.31	counter64	read-only	Under Sized Frames Received
jabbersRcvd	1.3.6.1.4.1.10950.1.1.6.2.1.1.32	counter64	read-only	Jabbers Received
serviceStats	1.3.6.1.4.1.10950.1.1.6.3
serviceStatsTable	1.3.6.1.4.1.10950.1.1.6.3.1		no-access	Description
serviceStatsEntry	1.3.6.1.4.1.10950.1.1.6.3.1.1		no-access	Row Description
serviceStatsPortIndex	1.3.6.1.4.1.10950.1.1.6.3.1.1.1	integer32	read-only	Maps to a physical port on the nCite
serviceStatsSlotId	1.3.6.1.4.1.10950.1.1.6.3.1.1.2	integer32	read-only	Slot number of the line card
realTimeTotalPackets	1.3.6.1.4.1.10950.1.1.6.3.1.1.3	counter64	read-only	Total number of real time packets processed
realTimeDiscardPackets	1.3.6.1.4.1.10950.1.1.6.3.1.1.4	counter64	read-only	Number of real time packets discarded
nrtTotalPackets	1.3.6.1.4.1.10950.1.1.6.3.1.1.5	counter64	read-only	Total number of near real time packets processed
nrtDiscardPackets	1.3.6.1.4.1.10950.1.1.6.3.1.1.6	counter64	read-only	Number of near real time packets discarded
bestEffortTotalPackets	1.3.6.1.4.1.10950.1.1.6.3.1.1.7	counter64	read-only	Total number of best effort packets processed
bestEffortDiscardPackets	1.3.6.1.4.1.10950.1.1.6.3.1.1.8	counter64	read-only	Number of best effort packets discarded
redundancyStats	1.3.6.1.4.1.10950.1.1.6.4
redundPairedModeTimeTicks	1.3.6.1.4.1.10950.1.1.6.4.1	counter64	read-only	Number of time ticks spent in duplex mode
redundRecoveryModeTimeTicks	1.3.6.1.4.1.10950.1.1.6.4.2	counter64	read-only	Number of time ticks spent in recovery mode
redundNumRedundLinkFailures	1.3.6.1.4.1.10950.1.1.6.4.3	counter64	read-only	Number of times the out of band link for redundancy has failed
redundActiveMateCalls	1.3.6.1.4.1.10950.1.1.6.4.4	counter64	read-only	Number of flows established flows associated with the mate system
redundActiveMateRegist	1.3.6.1.4.1.10950.1.1.6.4.5	counter64	read-only	Total number of active registrations
policyStats	1.3.6.1.4.1.10950.1.1.6.5
policyCountersTable	1.3.6.1.4.1.10950.1.1.6.5.1		no-access	Policy statistics.
policyCountersEntry	1.3.6.1.4.1.10950.1.1.6.5.1.1		no-access	Row Description
policyIndex	1.3.6.1.4.1.10950.1.1.6.5.1.1.1	octet string	read-only	This field reflects the policy name.
policyTotalPacketsA	1.3.6.1.4.1.10950.1.1.6.5.1.1.2	counter64	read-only	Total number of packets processed for the policy on side A
policyTotalPacketsB	1.3.6.1.4.1.10950.1.1.6.5.1.1.3	counter64	read-only	Total number of packets processed for the policy on side B
policyTotalPackets	1.3.6.1.4.1.10950.1.1.6.5.1.1.4	counter64	read-only	This field applies to nCites that do not have 'sides'
policyStatsReset	1.3.6.1.4.1.10950.1.1.6.5.2	integer32	read-write	Set to reset when the policy configuration is changed
sipStats	1.3.6.1.4.1.10950.1.1.6.6
sipStatCallsInitiating	1.3.6.1.4.1.10950.1.1.6.6.1	counter64	read-only	Real-time stat of calls that are being initiated after receiving the initial INVITE SIP request.
sipStatNonLocalActiveCalls	1.3.6.1.4.1.10950.1.1.6.6.2	counter64	read-only	Real-time stat of calls that are currently in the ACTIVE state that are non-local calls
sipStatLocalActiveCalls	1.3.6.1.4.1.10950.1.1.6.6.3	counter64	read-only	Real-time stat that is the number of active calls that are local
sipStatTermCalls	1.3.6.1.4.1.10950.1.1.6.6.4	counter64	read-only	Real-time stat that is the number of calls in the TERMINATING state after a BYE SIP request.
sipStatPeakActiveCalls	1.3.6.1.4.1.10950.1.1.6.6.5	counter64	read-only	Peak number of active calls since the last nCite reboot.
sipStatTotalActiveCalls	1.3.6.1.4.1.10950.1.1.6.6.6	counter64	read-only	Total number of active calls. sipStatLocalActvieCalls + sipStatNonLocalActiveCalls
sipStatCallsCompletedSuccess	1.3.6.1.4.1.10950.1.1.6.6.7	counter64	read-only	Total number of calls that have been completed successfully since the last time the nCIte was reboot.
sipStatCallsFailed	1.3.6.1.4.1.10950.1.1.6.6.8	counter64	read-only	Total number of calls that completed due to some failure since the last time the nCite was reboot.
sipStatCallsAbandoned	1.3.6.1.4.1.10950.1.1.6.6.9	counter64	read-only	Total number of calls that did not transition to active state because of normal termination since the last time the nCIte was reboot.
sipStatCallsDropped	1.3.6.1.4.1.10950.1.1.6.6.10	counter64	read-only	Total number of calls that were dropped due to exceeding adminision control since the last time the nCite was reboot.
sipStatCallsDegraded	1.3.6.1.4.1.10950.1.1.6.6.11	counter64	read-only	Total number of calls that were processed in a degraded state due to exceeding admission control since the last time the nCIte was reboot.
sipStatAuthFailures	1.3.6.1.4.1.10950.1.1.6.6.12	counter64	read-only	Total number of calls that were rejected because they could not be autenticated against a valid customer definition since the last time the nCite was reboot.
sipStatCallMediaTimeouts	1.3.6.1.4.1.10950.1.1.6.6.13	counter64	read-only	Total number of times a call was terminated because of a RTP media timeout since the last time the nCIte was reboot.
sipStatCallInitTimeouts	1.3.6.1.4.1.10950.1.1.6.6.14	counter64	read-only	Total number of times a SIP timout occurred after the receipt of the initial INVITE and before the ACK is received for the INVITE since the last time the nCite was reboot.
sipStatTermTimeouts	1.3.6.1.4.1.10950.1.1.6.6.15	counter64	read-only	Total number of times a SIP timout occurred after the receipt of the BYE and before the ACK is received for the BYE since the last time the nCIte was reboot.
sipStatMsgErrs	1.3.6.1.4.1.10950.1.1.6.6.16	counter64	read-only	Total number of times a SIP error message was received since the last time the nCite was reboot.
sipStatCallsProcessed	1.3.6.1.4.1.10950.1.1.6.6.17	counter64	read-only	Total number of calls that have been processed since the nCIte was last reboot. This iwll be the sum of sipStatCallsCompletedSuccess, sipStatCallsFailed, sipStatCallsAbandoned, sipStatCallsDropped, sipStatAuthFailures
sipStatPeakNonLocalCalls	1.3.6.1.4.1.10950.1.1.6.6.18	counter64	read-only	Real-time statistics that is the peak number of non-local active calls.
sipStatPeakLocalCalls	1.3.6.1.4.1.10950.1.1.6.6.19	counter64	read-only	Real-time statistic that is the peak number of active local calls.
sipStatRedirectSuccess	1.3.6.1.4.1.10950.1.1.6.6.20	counter64	read-only	Total number of successful redirects
sipStatRedirectFailures	1.3.6.1.4.1.10950.1.1.6.6.21	counter64	read-only	Total number of failed redirects
sipStatMessageRoutingFailures	1.3.6.1.4.1.10950.1.1.6.6.22	counter64	read-only	Failures due to route lookup - no enabled route found
sipStatAuthenticationChallenges	1.3.6.1.4.1.10950.1.1.6.6.23	counter64	read-only	Number of Authentication Challenges
sipStatRTPFWTraversalTimeouts	1.3.6.1.4.1.10950.1.1.6.6.24	counter64	read-only	Number of RTP forward traversal timeouts
sipStatMessagesReroutedToMate	1.3.6.1.4.1.10950.1.1.6.6.25	counter64	read-only	Number of messages rerouted to mate
sipStatSameSideActiveCalls	1.3.6.1.4.1.10950.1.1.6.6.26	counter64	read-only	Same side actvie calls
sipStatNormalActiveCalls	1.3.6.1.4.1.10950.1.1.6.6.27	counter64	read-only	Normal active calls
sipStatPeakSameSideActiveCalls	1.3.6.1.4.1.10950.1.1.6.6.28	counter64	read-only	Peak same side active calls
sipStatPeakNormalActiveCalls	1.3.6.1.4.1.10950.1.1.6.6.29	counter64	read-only	Peak normal active calls
sipStatCurrentFaxSessions	1.3.6.1.4.1.10950.1.1.6.6.30	counter64	read-only	Current number of FAX Sessions that are active
sipStatPeakFaxSessions	1.3.6.1.4.1.10950.1.1.6.6.31	counter64	read-only	Maximum number of FAX sessions active at any point in time since the statistics were last reset
sipStatTotalFaxSessions	1.3.6.1.4.1.10950.1.1.6.6.32	counter64	read-only	The total number of FAX sessions that have occurred since the statistics were last reset
sipStatPeakTotalActiveCalls	1.3.6.1.4.1.10950.1.1.6.6.33	counter64	read-only	Peak number of total active calls on the nCite since the statistics were last reset
vlanStats	1.3.6.1.4.1.10950.1.1.6.7
vlanStatsTable	1.3.6.1.4.1.10950.1.1.6.7.2		no-access	Description
vlanStatsEntry	1.3.6.1.4.1.10950.1.1.6.7.2.1		no-access	Row Description
vlanStatsSlotNum	1.3.6.1.4.1.10950.1.1.6.7.2.1.1	integer32	read-only	Slot number of line card
vlanStatsPortNum	1.3.6.1.4.1.10950.1.1.6.7.2.1.2	integer32	read-only	Port number for the vlan stats
vlanStatsVlanLabel	1.3.6.1.4.1.10950.1.1.6.7.2.1.3	integer32	read-only	Unique identifier of the VLAN
vlanTotalPacketsXmit	1.3.6.1.4.1.10950.1.1.6.7.2.1.4	counter64	read-only	Number of packets transmitted on a VLAN
vlanTotalPacketsRcvd	1.3.6.1.4.1.10950.1.1.6.7.2.1.5	counter64	read-only	Number of packets receivedon the given VLAN
vlanStatsReset	1.3.6.1.4.1.10950.1.1.6.7.3	integer	read-write	Set to reset when the policy image changes Enumeration: 'default': 0, 'reset': 1.
custSipStats	1.3.6.1.4.1.10950.1.1.6.8
custSipStatsTable	1.3.6.1.4.1.10950.1.1.6.8.1		no-access	Description
custSipStatsEntry	1.3.6.1.4.1.10950.1.1.6.8.1.1		no-access	Row Description
custSipStatId	1.3.6.1.4.1.10950.1.1.6.8.1.1.1	integer32	read-only	Customer ID as it is defined in the EMS database and the XML file provisioned to the nCIte
custSipStatCallsInitiating	1.3.6.1.4.1.10950.1.1.6.8.1.1.2	counter64	read-only	Real-time stat of calls that are being initiated after receiving the initial INVITE SIP request.
custSipStatNonLocalActiveCalls	1.3.6.1.4.1.10950.1.1.6.8.1.1.3	counter64	read-only	Real-time stat of calls that are currently in the ACTIVE state that are non-local calls
custSipStatLocalActiveCalls	1.3.6.1.4.1.10950.1.1.6.8.1.1.4	counter64	read-only	Real-time stat that is the number of active calls that are local
custSipStatTermCalls	1.3.6.1.4.1.10950.1.1.6.8.1.1.5	counter64	read-only	Real-time stat that is the number of calls in the TERMINATING state after a BYE SIP request.
custSipStatPeakActiveCalls	1.3.6.1.4.1.10950.1.1.6.8.1.1.6	counter64	read-only	Peak number of active calls since the last nCite reboot.
custSipStatTotalActiveCalls	1.3.6.1.4.1.10950.1.1.6.8.1.1.7	counter64	read-only	Total number of active calls. custSipStatLocalActvieCalls + custSipStatNonLocalActiveCalls
custSipStatCallsCompletedSuccess	1.3.6.1.4.1.10950.1.1.6.8.1.1.8	counter64	read-only	Total number of calls that have been completed successfully since the last time the nCIte was reboot.
custSipStatCallsFailed	1.3.6.1.4.1.10950.1.1.6.8.1.1.9	counter64	read-only	Total number of calls that completed due to some failure since the last time the nCite was reboot.
custSipStatCallsAbandoned	1.3.6.1.4.1.10950.1.1.6.8.1.1.10	counter64	read-only	Total number of calls that did not transition to active state because of normal termination since the last time the nCIte was reboot.
custSipStatCallsDropped	1.3.6.1.4.1.10950.1.1.6.8.1.1.11	counter64	read-only	Total number of calls that were dropped due to exceeding adminision control since the last time the nCite was reboot.
custSipStatCallsDegraded	1.3.6.1.4.1.10950.1.1.6.8.1.1.12	counter64	read-only	Total number of calls that were processed in a degraded state due to exceeding admission control since the last time the nCIte was reboot.
custSipStatCallMediaTimeouts	1.3.6.1.4.1.10950.1.1.6.8.1.1.13	counter64	read-only	Total number of times a call was terminated because of a RTP media timeout since the last time the nCIte was reboot.
custSipStatCallInitTimeouts	1.3.6.1.4.1.10950.1.1.6.8.1.1.14	counter64	read-only	Total number of times a SIP timout occurred after the receipt of the initial INVITE and before the ACK is received for the INVITE since the last time the nCite was reboot.
custSipStatTermTimeouts	1.3.6.1.4.1.10950.1.1.6.8.1.1.15	counter64	read-only	Total number of times a SIP timout occurred after the receipt of the BYE and before the ACK is received for the BYE since the last time the nCIte was reboot.
custSipStatCallsProcessed	1.3.6.1.4.1.10950.1.1.6.8.1.1.16	counter64	read-only	Total number of calls that have been processed since the nCIte was last reboot. This iwll be the sum of custSipStatCallsCompletedSuccess, custSipStatCallsFailed, custSipStatCallsAbandoned, custSipStatCallsDropped, custSipStatAuthFailures
custSipPeakNonLocalCalls	1.3.6.1.4.1.10950.1.1.6.8.1.1.17	counter64	read-only	Peak number of non-local calls since the ncite was reboot or the statistics were cleared
custSipPeakLocalCalls	1.3.6.1.4.1.10950.1.1.6.8.1.1.18	counter64	read-only	Peak number of local calls
custSipAuthenticationChallenges	1.3.6.1.4.1.10950.1.1.6.8.1.1.19	counter64	read-only	Number of authentication challanges
custSipRTPFWTraversalTimeouts	1.3.6.1.4.1.10950.1.1.6.8.1.1.20	counter64	read-only	Number of RTP forward traversal timeouts
custSipSameSideActiveCalls	1.3.6.1.4.1.10950.1.1.6.8.1.1.21	counter64	read-only	Number of same side active calls
custSipNormalActiveCalls	1.3.6.1.4.1.10950.1.1.6.8.1.1.22	counter64	read-only	Number of normal active calls
custSipPeakNormalActiveCalls	1.3.6.1.4.1.10950.1.1.6.8.1.1.23	counter64	read-only	Maximum number of active normal calls since the statistics were last reset.
custSipPeakTotalActive	1.3.6.1.4.1.10950.1.1.6.8.1.1.24	counter64	read-only	Peak number of total active calls since the statistics were last reset
nCiteStatsConfigReset	1.3.6.1.4.1.10950.1.1.6.9	integer	read-write	This value is set whenever the equipment configuration changes(i.e. a line card is added or removed). Enumeration: 'default': 0, 'reset': 1.
nCiteSessionDetailRecord	1.3.6.1.4.1.10950.1.1.6.10
nCiteSDRCollectionCycle	1.3.6.1.4.1.10950.1.1.6.10.1	integer32	read-only	The number of minutes that data is collected per file.
nCIteSDRLastSent	1.3.6.1.4.1.10950.1.1.6.10.2	dateandtime	read-only	Date and time that the last SDR file was sent to the EMS
nCiteSDREnable	1.3.6.1.4.1.10950.1.1.6.10.3	integer	read-only	Indicates whether SDR generation is enabled Enumeration: 'disabled': 0, 'enabled': 1.
nCiteSDRSentTrap	1.3.6.1.4.1.10950.1.1.6.10.4			Description
nCiteSDRSentTrapAck	1.3.6.1.4.1.10950.1.1.6.10.5	integer	read-write	nCite SDR sent trap acknowledge flag Enumeration: 'ack': 1, 'notAck': 0.
nCiteSDRSentTrapAckSource	1.3.6.1.4.1.10950.1.1.6.10.6	ipaddress	read-write	Identifies the Snmp Manager which sets the trap ack.
registrationStats	1.3.6.1.4.1.10950.1.1.6.11
regStatNumInitiating	1.3.6.1.4.1.10950.1.1.6.11.1	counter64	read-only	Real-time statistic that is the number of Registrations that are currently in the Initiated state.
regStatNumActive	1.3.6.1.4.1.10950.1.1.6.11.2	counter64	read-only	Real-time statistic that is the number of active registrations.
regStatPeak	1.3.6.1.4.1.10950.1.1.6.11.3	counter64	read-only	Real-time statistic that is the peak number of active registrations.
regStatUpdateSuccess	1.3.6.1.4.1.10950.1.1.6.11.4	counter64	read-only	Total number of successful registration updates since the last time the nCite was reboot
regStatUpdateFailed	1.3.6.1.4.1.10950.1.1.6.11.5	counter64	read-only	Total number of registration update requests that have failed since the nCite was last reboot.
regStatExpired	1.3.6.1.4.1.10950.1.1.6.11.6	counter64	read-only	Total number of registration timeouts that have occurred since the nCite was last reboot.
regStatDropped	1.3.6.1.4.1.10950.1.1.6.11.7	counter64	read-only	Total number of registrations that were dropped due to exceeding admission control since the nCIte was last reboot.
regStatAuthFailures	1.3.6.1.4.1.10950.1.1.6.11.8	counter64	read-only	Total number of registrations that were rejected because they could not be authenticated against a valid customer definition.
regStatInitSipTimeouts	1.3.6.1.4.1.10950.1.1.6.11.9	counter64	read-only	Total number of times a SIP timeout occurred after the receipt of the initial registration and before the ACK is received for the Registration since the last time the nCIte was reboot.
regStatTermSipTimeouts	1.3.6.1.4.1.10950.1.1.6.11.10	counter64	read-only	Total number of times a DIP timeout occurred after the receipt of the terminate registration and before the ACK is received since the last time the nCIte was reboot.
regStatTerminating	1.3.6.1.4.1.10950.1.1.6.11.11	counter64	read-only	Number of terminating registrations
regStatFailed	1.3.6.1.4.1.10950.1.1.6.11.12	counter64	read-only	Number of failed registrations
regStatAuthenticationChallenges	1.3.6.1.4.1.10950.1.1.6.11.13	counter64	read-only	Registration authentication challenges
regStatUnauthReg	1.3.6.1.4.1.10950.1.1.6.11.14	counter64	read-only	Total number of accumulated unauthorized registrations
custRegStats	1.3.6.1.4.1.10950.1.1.6.12
custRegStatsTable	1.3.6.1.4.1.10950.1.1.6.12.1		no-access	Description
custRegStatsEntry	1.3.6.1.4.1.10950.1.1.6.12.1.1		no-access	Row Description
custRegStatId	1.3.6.1.4.1.10950.1.1.6.12.1.1.1	integer32	read-only	Customer ID as it is defined in the EMS database and the XML file provisioned to the nCIte
custRegStatNumInitiated	1.3.6.1.4.1.10950.1.1.6.12.1.1.2	counter64	read-only	Real-time statistic that is the number of Registrations that are currently in the Initiated state.
custRegStatNumActive	1.3.6.1.4.1.10950.1.1.6.12.1.1.3	counter64	read-only	Real-time statistic that is the number of active registrations.
custRegStatPeak	1.3.6.1.4.1.10950.1.1.6.12.1.1.4	counter64	read-only	Real-time statistic that is the peak number of active registrations.
custRegStatUpdateSuccess	1.3.6.1.4.1.10950.1.1.6.12.1.1.5	counter64	read-only	Total number of successful registration updates since the last time the nCite was reboot
custRegStatUpdateFailed	1.3.6.1.4.1.10950.1.1.6.12.1.1.6	counter64	read-only	Total number of registration update requests that have failed since the nCite was last reboot.
custRegStatExpired	1.3.6.1.4.1.10950.1.1.6.12.1.1.7	counter64	read-only	Total number of registration timeouts that have occurred since the nCite was last reboot.
custRegStatDropped	1.3.6.1.4.1.10950.1.1.6.12.1.1.8	counter64	read-only	Total number of registrations that were dropped due to exceeding admission control since the nCIte was last reboot.
custRegStatInitSipTimeouts	1.3.6.1.4.1.10950.1.1.6.12.1.1.9	counter64	read-only	Total number of times a SIP timeout occurred after the receipt of the initial registration and before the ACK is received for the Registration since the last time the nCIte was reboot.
custRegStatTermSipTimeouts	1.3.6.1.4.1.10950.1.1.6.12.1.1.10	counter64	read-only	Total number of times a DIP timeout occurred after the receipt of the terminate registration and before the ACK is received since the last time the nCIte was reboot.
custRegStatTerminating	1.3.6.1.4.1.10950.1.1.6.12.1.1.11	counter64	read-only	Number of customer registrations terminating
custRegStatFailed	1.3.6.1.4.1.10950.1.1.6.12.1.1.12	counter64	read-only	Number of customer registrations that have failed
custRegAuthenticationChallenges	1.3.6.1.4.1.10950.1.1.6.12.1.1.13	counter64	read-only	Customer Authentication challenges
custRegStatUnauthorizedReg	1.3.6.1.4.1.10950.1.1.6.12.1.1.14	counter64	read-only	Number of accumulated unauthorized registrations for a customer
ntsStats	1.3.6.1.4.1.10950.1.1.6.13
ntsStatNumCust	1.3.6.1.4.1.10950.1.1.6.13.1	counter64	read-only	Total number of customers for which NTS Clients are enabled.
ntsStatAuthFailures	1.3.6.1.4.1.10950.1.1.6.13.2	counter64	read-only	Total number of times NTS Client connections were rejected because of authentication failures since the last time the nCIte was reboot.
ntsStatCustConnected	1.3.6.1.4.1.10950.1.1.6.13.3	counter64	read-only	Number of NTS Clients that are currently connected.
rogueStats	1.3.6.1.4.1.10950.1.1.6.14
edrCurrentCallCount	1.3.6.1.4.1.10950.1.1.6.14.1	counter64	read-only	Current number of calls that have been detected as rogue
edrPeakCallCount	1.3.6.1.4.1.10950.1.1.6.14.2	counter64	read-only	Peak number of calls that have been declared rogue
edrTotalCallsRogue	1.3.6.1.4.1.10950.1.1.6.14.3	counter64	read-only	Total number of calls that have been detected as rogue since the last time the nCite was restarted
edrLastDetection	1.3.6.1.4.1.10950.1.1.6.14.4	dateandtime	read-only	Date/time of the last time that a call was detected as rogue
lrdCurrentCallCount	1.3.6.1.4.1.10950.1.1.6.14.5	counter64	read-only	Current number of LRD rogue calls
lrdPeakCallCount	1.3.6.1.4.1.10950.1.1.6.14.6	counter64	read-only	Maximum number of active rogue calls since the last time the stats were reset
lrdTotalCallsRogue	1.3.6.1.4.1.10950.1.1.6.14.7	counter64	read-only	The cumulative number of rogue calls detected since the stats were reset
lrdLastDetection	1.3.6.1.4.1.10950.1.1.6.14.8	dateandtime	read-only	Date/time that the last LRD rogue call was detected
nCiteStatsReset	1.3.6.1.4.1.10950.1.1.6.15	integer	read-write	This value is set when a group of statistics has been requested to be reset Enumeration: 'rogueStats': 3, 'sipCommonStats': 10, 'h323RegStats': 8, 'default': 0, 'sipStats': 1, 'ntsStats': 4, 'sipH323Stats': 6, 'h323Stats': 7, 'registrationStats': 2, 'sipEvtDlgStats': 11, 'voIpStats': 5, 'mediaStats': 9.
custNtsStats	1.3.6.1.4.1.10950.1.1.6.16
custNtsStatsTable	1.3.6.1.4.1.10950.1.1.6.16.1		no-access	NTS Customer statistics table
custNtsStatsEntry	1.3.6.1.4.1.10950.1.1.6.16.1.1		no-access	Row Description
custNtsStatId	1.3.6.1.4.1.10950.1.1.6.16.1.1.1	integer32	read-only	Customer location ID
custNtsAuthorizationFailed	1.3.6.1.4.1.10950.1.1.6.16.1.1.2	counter64	read-only	Number of authorizatin failures for NTS customer
sipH323Stats	1.3.6.1.4.1.10950.1.1.6.17
sipH323CallsInitiating	1.3.6.1.4.1.10950.1.1.6.17.1	counter64	read-only	Real-time stat of calls that are being initiated after receiving the initial INVITE SIP request.
sipH323LocalActiveCalls	1.3.6.1.4.1.10950.1.1.6.17.2	counter64	read-only	Real-time stat that is the number of active calls that are local
sipH323TermCalls	1.3.6.1.4.1.10950.1.1.6.17.3	counter64	read-only	Real-time stat that is the number of calls in the TERMINATING state after a BYE SIP request.
sipH323PeakTotalActiveCalls	1.3.6.1.4.1.10950.1.1.6.17.4	counter64	read-only	Peak number of active calls since the last nCite reboot.
sipH323TotalActiveCalls	1.3.6.1.4.1.10950.1.1.6.17.5	counter64	read-only	Total number of active calls. sipH323LocalActvieCalls + sipH323NonLocalActiveCalls
sipH323CallsCompletedSuccess	1.3.6.1.4.1.10950.1.1.6.17.6	counter64	read-only	Total number of calls that have been completed successfully since the last time the nCIte was reboot.
sipH323CallsFailed	1.3.6.1.4.1.10950.1.1.6.17.7	counter64	read-only	Total number of calls that completed due to some failure since the last time the nCite was reboot.
sipH323CallsAbandoned	1.3.6.1.4.1.10950.1.1.6.17.8	counter64	read-only	Total number of calls that did not transition to active state because of normal termination since the last time the nCIte was reboot.
sipH323CallsDropped	1.3.6.1.4.1.10950.1.1.6.17.9	counter64	read-only	Total number of calls that were dropped due to exceeding adminision control since the last time the nCite was reboot.
sipH323CallsDegraded	1.3.6.1.4.1.10950.1.1.6.17.10	counter64	read-only	Total number of calls that were processed in a degraded state due to exceeding admission control since the last time the nCIte was reboot.
sipH323AuthFailures	1.3.6.1.4.1.10950.1.1.6.17.11	counter64	read-only	Total number of calls that were rejected because they could not be autenticated against a valid customer definition since the last time the nCite was reboot.
sipH323CallMediaTimeouts	1.3.6.1.4.1.10950.1.1.6.17.12	counter64	read-only	Total number of times a call was terminated because of a RTP media timeout since the last time the nCIte was reboot.
sipH323CallInitTimeouts	1.3.6.1.4.1.10950.1.1.6.17.13	counter64	read-only	Total number of times a SIP timout occurred after the receipt of the initial INVITE and before the ACK is received for the INVITE since the last time the nCite was reboot.
sipH323TermTimeouts	1.3.6.1.4.1.10950.1.1.6.17.14	counter64	read-only	Total number of times a SIP timout occurred after the receipt of the BYE and before the ACK is received for the BYE since the last time the nCIte was reboot.
sipH323MsgErrs	1.3.6.1.4.1.10950.1.1.6.17.15	counter64	read-only	Total number of times a SIP error message was received since the last time the nCite was reboot.
sipH323CallsProcessed	1.3.6.1.4.1.10950.1.1.6.17.16	counter64	read-only	Total number of calls that have been processed since the nCIte was last reboot. This iwll be the sum of sipH323CallsCompletedSuccess, sipH323CallsFailed, sipH323CallsAbandoned, sipH323CallsDropped, sipH323AuthFailures
sipH323PeakLocalCalls	1.3.6.1.4.1.10950.1.1.6.17.17	counter64	read-only	Real-time statistic that is the peak number of active local calls.
sipH323RedirectSuccess	1.3.6.1.4.1.10950.1.1.6.17.18	counter64	read-only	Total number of successful redirects
sipH323RedirectFailures	1.3.6.1.4.1.10950.1.1.6.17.19	counter64	read-only	Total number of failed redirects
sipH323MessageRoutingFailures	1.3.6.1.4.1.10950.1.1.6.17.20	counter64	read-only	Failures due to route lookup - no enabled route found
sipH323AuthenticationChallenges	1.3.6.1.4.1.10950.1.1.6.17.21	counter64	read-only	Number of Authentication Challenges
sipH323RTPFWTraversalTimeouts	1.3.6.1.4.1.10950.1.1.6.17.22	counter64	read-only	Number of RTP forward traversal timeouts
sipH323MessagesReroutedToMate	1.3.6.1.4.1.10950.1.1.6.17.23	counter64	read-only	Number of messages rerouted to mate
sipH323SameSideActiveCalls	1.3.6.1.4.1.10950.1.1.6.17.24	counter64	read-only	Same side actvie calls
sipH323NormalActiveCalls	1.3.6.1.4.1.10950.1.1.6.17.25	counter64	read-only	Normal active calls
sipH323PeakSameSideActiveCalls	1.3.6.1.4.1.10950.1.1.6.17.26	counter64	read-only	Peak same side active calls
sipH323PeakNormalActiveCalls	1.3.6.1.4.1.10950.1.1.6.17.27	counter64	read-only	Peak normal active calls
sipH323CurrentFaxSessions	1.3.6.1.4.1.10950.1.1.6.17.28	counter64	read-only	Current number of FAX Sessions that are active
sipH323PeakFaxSessions	1.3.6.1.4.1.10950.1.1.6.17.29	counter64	read-only	Maximum number of FAX sessions active at any point in time since the statistics were last reset
sipH323TotalFaxSessions	1.3.6.1.4.1.10950.1.1.6.17.30	counter64	read-only	The total number of FAX sessions that have occurred since the statistics were last reset
h323Stats	1.3.6.1.4.1.10950.1.1.6.18
h323CallsInitiating	1.3.6.1.4.1.10950.1.1.6.18.1	counter64	read-only	Real-time stat of calls that are being initiated after receiving the initial INVITE SIP request.
h323LocalActiveCalls	1.3.6.1.4.1.10950.1.1.6.18.2	counter64	read-only	Real-time stat that is the number of active calls that are local
h323TermCalls	1.3.6.1.4.1.10950.1.1.6.18.3	counter64	read-only	Real-time stat that is the number of calls in the TERMINATING state after a BYE SIP request.
h323PeakTotalActiveCalls	1.3.6.1.4.1.10950.1.1.6.18.4	counter64	read-only	Peak number of active calls since the last nCite reboot.
h323TotalActiveCalls	1.3.6.1.4.1.10950.1.1.6.18.5	counter64	read-only	Total number of active calls. h323LocalActvieCalls + h323NonLocalActiveCalls
h323CallsCompletedSuccess	1.3.6.1.4.1.10950.1.1.6.18.6	counter64	read-only	Total number of calls that have been completed successfully since the last time the nCIte was reboot.
h323CallsFailed	1.3.6.1.4.1.10950.1.1.6.18.7	counter64	read-only	Total number of calls that completed due to some failure since the last time the nCite was reboot.
h323CallsAbandoned	1.3.6.1.4.1.10950.1.1.6.18.8	counter64	read-only	Total number of calls that did not transition to active state because of normal termination since the last time the nCIte was reboot.
h323CallsDropped	1.3.6.1.4.1.10950.1.1.6.18.9	counter64	read-only	Total number of calls that were dropped due to exceeding adminision control since the last time the nCite was reboot.
h323CallsDegraded	1.3.6.1.4.1.10950.1.1.6.18.10	counter64	read-only	Total number of calls that were processed in a degraded state due to exceeding admission control since the last time the nCIte was reboot.
h323AuthFailures	1.3.6.1.4.1.10950.1.1.6.18.11	counter64	read-only	Total number of calls that were rejected because they could not be autenticated against a valid customer definition since the last time the nCite was reboot.
h323CallMediaTimeouts	1.3.6.1.4.1.10950.1.1.6.18.12	counter64	read-only	Total number of times a call was terminated because of a RTP media timeout since the last time the nCIte was reboot.
h323CallInitTimeouts	1.3.6.1.4.1.10950.1.1.6.18.13	counter64	read-only	Total number of times a SIP timout occurred after the receipt of the initial INVITE and before the ACK is received for the INVITE since the last time the nCite was reboot.
h323TermTimeouts	1.3.6.1.4.1.10950.1.1.6.18.14	counter64	read-only	Total number of times a SIP timout occurred after the receipt of the BYE and before the ACK is received for the BYE since the last time the nCIte was reboot.
h323MsgErrs	1.3.6.1.4.1.10950.1.1.6.18.15	counter64	read-only	Total number of times a SIP error message was received since the last time the nCite was reboot.
h323CallsProcessed	1.3.6.1.4.1.10950.1.1.6.18.16	counter64	read-only	Total number of calls that have been processed since the nCIte was last reboot. This iwll be the sum of h323CallsCompletedSuccess, h323CallsFailed, h323CallsAbandoned, h323CallsDropped, h323AuthFailures
h323PeakLocalCalls	1.3.6.1.4.1.10950.1.1.6.18.17	counter64	read-only	Real-time statistic that is the peak number of active local calls.
h323MessageRoutingFailures	1.3.6.1.4.1.10950.1.1.6.18.18	counter64	read-only	Failures due to route lookup - no enabled route found
h323AuthenticationChallenges	1.3.6.1.4.1.10950.1.1.6.18.19	counter64	read-only	Number of Authentication Challenges
h323RTPFWTraversalTimeouts	1.3.6.1.4.1.10950.1.1.6.18.20	counter64	read-only	Number of RTP forward traversal timeouts
h323SameSideActiveCalls	1.3.6.1.4.1.10950.1.1.6.18.21	counter64	read-only	Same side actvie calls
h323NormalActiveCalls	1.3.6.1.4.1.10950.1.1.6.18.22	counter64	read-only	Normal active calls
h323PeakSameSideActiveCalls	1.3.6.1.4.1.10950.1.1.6.18.23	counter64	read-only	Peak same side active calls
h323PeakNormalActiveCalls	1.3.6.1.4.1.10950.1.1.6.18.24	counter64	read-only	Peak normal active calls
h323CurrentFaxSessions	1.3.6.1.4.1.10950.1.1.6.18.25	counter64	read-only	Current number of FAX Sessions that are active
h323PeakFaxSessions	1.3.6.1.4.1.10950.1.1.6.18.26	counter64	read-only	Maximum number of FAX sessions active at any point in time since the statistics were last reset
h323TotalFaxSessions	1.3.6.1.4.1.10950.1.1.6.18.27	counter64	read-only	The total number of FAX sessions that have occurred since the statistics were last reset
voIpStats	1.3.6.1.4.1.10950.1.1.6.19
voIpCallsInitiating	1.3.6.1.4.1.10950.1.1.6.19.1	counter64	read-only	Real-time stat of calls that are being initiated after receiving the initial INVITE SIP request.
voIpLocalActiveCalls	1.3.6.1.4.1.10950.1.1.6.19.2	counter64	read-only	Real-time stat that is the number of active calls that are local
voIpTermCalls	1.3.6.1.4.1.10950.1.1.6.19.3	counter64	read-only	Real-time stat that is the number of calls in the TERMINATING state after a BYE SIP request.
voIpPeakTotalActiveCalls	1.3.6.1.4.1.10950.1.1.6.19.4	counter64	read-only	Peak number of active calls since the last nCite reboot.
voIpTotalActiveCalls	1.3.6.1.4.1.10950.1.1.6.19.5	counter64	read-only	Total number of active calls. voIpLocalActvieCalls + voIpNonLocalActiveCalls
voIpCallsCompletedSuccess	1.3.6.1.4.1.10950.1.1.6.19.6	counter64	read-only	Total number of calls that have been completed successfully since the last time the nCIte was reboot.
voIpCallsFailed	1.3.6.1.4.1.10950.1.1.6.19.7	counter64	read-only	Total number of calls that completed due to some failure since the last time the nCite was reboot.
voIpCallsAbandoned	1.3.6.1.4.1.10950.1.1.6.19.8	counter64	read-only	Total number of calls that did not transition to active state because of normal termination since the last time the nCIte was reboot.
voIpCallsDropped	1.3.6.1.4.1.10950.1.1.6.19.9	counter64	read-only	Total number of calls that were dropped due to exceeding adminision control since the last time the nCite was reboot.
voIpCallsDegraded	1.3.6.1.4.1.10950.1.1.6.19.10	counter64	read-only	Total number of calls that were processed in a degraded state due to exceeding admission control since the last time the nCIte was reboot.
voIpAuthFailures	1.3.6.1.4.1.10950.1.1.6.19.11	counter64	read-only	Total number of calls that were rejected because they could not be autenticated against a valid customer definition since the last time the nCite was reboot.
voIpCallMediaTimeouts	1.3.6.1.4.1.10950.1.1.6.19.12	counter64	read-only	Total number of times a call was terminated because of a RTP media timeout since the last time the nCIte was reboot.
voIpCallInitTimeouts	1.3.6.1.4.1.10950.1.1.6.19.13	counter64	read-only	Total number of times a SIP timout occurred after the receipt of the initial INVITE and before the ACK is received for the INVITE since the last time the nCite was reboot.
voIpTermTimeouts	1.3.6.1.4.1.10950.1.1.6.19.14	counter64	read-only	Total number of times a SIP timout occurred after the receipt of the BYE and before the ACK is received for the BYE since the last time the nCIte was reboot.
voIpMsgErrs	1.3.6.1.4.1.10950.1.1.6.19.15	counter64	read-only	Total number of times a SIP error message was received since the last time the nCite was reboot.
voIpCallsProcessed	1.3.6.1.4.1.10950.1.1.6.19.16	counter64	read-only	Total number of calls that have been processed since the nCIte was last reboot. This iwll be the sum of voIpCallsCompletedSuccess, voIpCallsFailed, voIpCallsAbandoned, voIpCallsDropped, voIpAuthFailures
voIpPeakLocalCalls	1.3.6.1.4.1.10950.1.1.6.19.17	counter64	read-only	Real-time statistic that is the peak number of active local calls.
voIpRedirectSuccess	1.3.6.1.4.1.10950.1.1.6.19.18	counter64	read-only	Total number of successful redirects
voIpRedirectFailures	1.3.6.1.4.1.10950.1.1.6.19.19	counter64	read-only	Total number of failed redirects
voIpMessageRoutingFailures	1.3.6.1.4.1.10950.1.1.6.19.20	counter64	read-only	Failures due to route lookup - no enabled route found
voIpAuthenticationChallenges	1.3.6.1.4.1.10950.1.1.6.19.21	counter64	read-only	Number of Authentication Challenges
voIpRTPFWTraversalTimeouts	1.3.6.1.4.1.10950.1.1.6.19.22	counter64	read-only	Number of RTP forward traversal timeouts
voIpMessagesReroutedToMate	1.3.6.1.4.1.10950.1.1.6.19.23	counter64	read-only	Number of messages rerouted to mate
voIpSameSideActiveCalls	1.3.6.1.4.1.10950.1.1.6.19.24	counter64	read-only	Same side actvie calls
voIpNormalActiveCalls	1.3.6.1.4.1.10950.1.1.6.19.25	counter64	read-only	Normal active calls
voIpPeakSameSideActiveCalls	1.3.6.1.4.1.10950.1.1.6.19.26	counter64	read-only	Peak same side active calls
voIpPeakNormalActiveCalls	1.3.6.1.4.1.10950.1.1.6.19.27	counter64	read-only	Peak normal active calls
voIpCurrentFaxSessions	1.3.6.1.4.1.10950.1.1.6.19.28	counter64	read-only	Current number of FAX Sessions that are active
voIpPeakFaxSessions	1.3.6.1.4.1.10950.1.1.6.19.29	counter64	read-only	Maximum number of FAX sessions active at any point in time since the statistics were last reset
voIpTotalFaxSessions	1.3.6.1.4.1.10950.1.1.6.19.30	counter64	read-only	The total number of FAX sessions that have occurred since the statistics were last reset
custSipH323Stats	1.3.6.1.4.1.10950.1.1.6.20
custSipH323StatsTable	1.3.6.1.4.1.10950.1.1.6.20.1		no-access	Description
custSipH323StatsEntry	1.3.6.1.4.1.10950.1.1.6.20.1.1		no-access	Row Description
custSipH323Id	1.3.6.1.4.1.10950.1.1.6.20.1.1.1	integer32	read-only	Customer ID as it is defined in the EMS database and the XML file provisioned to the nCIte
custSipH323CallsInitiating	1.3.6.1.4.1.10950.1.1.6.20.1.1.2	counter64	read-only	Real-time stat of calls that are being initiated after receiving the initial INVITE SIP request.
custSipH323LocalActiveCalls	1.3.6.1.4.1.10950.1.1.6.20.1.1.3	counter64	read-only	Real-time stat that is the number of active calls that are local
custSipH323TermCalls	1.3.6.1.4.1.10950.1.1.6.20.1.1.4	counter64	read-only	Real-time stat that is the number of calls in the TERMINATING state after a BYE SIP request.
custSipH323PeakTotalActiveCalls	1.3.6.1.4.1.10950.1.1.6.20.1.1.5	counter64	read-only	Peak number of total active calls since the last nCite reboot.
custSipH323TotalActiveCalls	1.3.6.1.4.1.10950.1.1.6.20.1.1.6	counter64	read-only	Total number of active calls. custSipH323StatLocalActvieCalls + custSipH323StatNonLocalActiveCalls
custSipH323CallsCompletedSuccess	1.3.6.1.4.1.10950.1.1.6.20.1.1.7	counter64	read-only	Total number of calls that have been completed successfully since the last time the nCIte was reboot.
custSipH323CallsFailed	1.3.6.1.4.1.10950.1.1.6.20.1.1.8	counter64	read-only	Total number of calls that completed due to some failure since the last time the nCite was reboot.
custSipH323CallsAbandoned	1.3.6.1.4.1.10950.1.1.6.20.1.1.9	counter64	read-only	Total number of calls that did not transition to active state because of normal termination since the last time the nCIte was reboot.
custSipH323CallsDropped	1.3.6.1.4.1.10950.1.1.6.20.1.1.10	counter64	read-only	Total number of calls that were dropped due to exceeding adminision control since the last time the nCite was reboot.
custSipH323CallsDegraded	1.3.6.1.4.1.10950.1.1.6.20.1.1.11	counter64	read-only	Total number of calls that were processed in a degraded state due to exceeding admission control since the last time the nCIte was reboot.
custSipH323CallMediaTimeouts	1.3.6.1.4.1.10950.1.1.6.20.1.1.12	counter64	read-only	Total number of times a call was terminated because of a RTP media timeout since the last time the nCIte was reboot.
custSipH323CallInitTimeouts	1.3.6.1.4.1.10950.1.1.6.20.1.1.13	counter64	read-only	Total number of times a SIP timout occurred after the receipt of the initial INVITE and before the ACK is received for the INVITE since the last time the nCite was reboot.
custSipH323TermTimeouts	1.3.6.1.4.1.10950.1.1.6.20.1.1.14	counter64	read-only	Total number of times a SIP timout occurred after the receipt of the BYE and before the ACK is received for the BYE since the last time the nCIte was reboot.
custSipH323CallsProcessed	1.3.6.1.4.1.10950.1.1.6.20.1.1.15	counter64	read-only	Total number of calls that have been processed since the nCIte was last reboot. This will be the sum of custSipH323CallsCompletedSuccess, custSipH323CallsFailed, custSipH323CallsAbandoned, custSipH323CallsDropped, custSipH323AuthFailures
custSipH323PeakLocalCalls	1.3.6.1.4.1.10950.1.1.6.20.1.1.16	counter64	read-only	Peak number of local calls
custSipH323AuthenticationChallenges	1.3.6.1.4.1.10950.1.1.6.20.1.1.17	counter64	read-only	Number of authentication challanges
custSipH323RTPFWTraversalTimeouts	1.3.6.1.4.1.10950.1.1.6.20.1.1.18	counter64	read-only	Number of RTP forward traversal timeouts
custSipH323SameSideActiveCalls	1.3.6.1.4.1.10950.1.1.6.20.1.1.19	counter64	read-only	Number of same side active calls
custSipH323NormalActiveCalls	1.3.6.1.4.1.10950.1.1.6.20.1.1.20	counter64	read-only	Number of normal active calls
custSipH323PeakNormalActiveCalls	1.3.6.1.4.1.10950.1.1.6.20.1.1.21	counter64	read-only	Maximum number of active normal calls since the statistics were last reset.
custH323Stats	1.3.6.1.4.1.10950.1.1.6.21
custH323StatsTable	1.3.6.1.4.1.10950.1.1.6.21.1		no-access	Description
custH323StatsEntry	1.3.6.1.4.1.10950.1.1.6.21.1.1		no-access	Row Description
custH323Id	1.3.6.1.4.1.10950.1.1.6.21.1.1.1	integer32	read-only	Customer ID as it is defined in the EMS database and the XML file provisioned to the nCIte
custH323CallsInitiating	1.3.6.1.4.1.10950.1.1.6.21.1.1.2	counter64	read-only	Real-time stat of calls that are being initiated after receiving the initial INVITE SIP request.
custH323LocalActiveCalls	1.3.6.1.4.1.10950.1.1.6.21.1.1.3	counter64	read-only	Real-time stat that is the number of active calls that are local
custH323TermCalls	1.3.6.1.4.1.10950.1.1.6.21.1.1.4	counter64	read-only	Real-time stat that is the number of calls in the TERMINATING state after a BYE SIP request.
custH323PeakTotalActiveCalls	1.3.6.1.4.1.10950.1.1.6.21.1.1.5	counter64	read-only	Peak number of total active calls since the last nCite reboot.
custH323TotalActiveCalls	1.3.6.1.4.1.10950.1.1.6.21.1.1.6	counter64	read-only	Total number of active calls. custH323StatLocalActvieCalls + custH323StatNonLocalActiveCalls
custH323CallsCompletedSuccess	1.3.6.1.4.1.10950.1.1.6.21.1.1.7	counter64	read-only	Total number of calls that have been completed successfully since the last time the nCIte was reboot.
custH323CallsFailed	1.3.6.1.4.1.10950.1.1.6.21.1.1.8	counter64	read-only	Total number of calls that completed due to some failure since the last time the nCite was reboot.
custH323CallsAbandoned	1.3.6.1.4.1.10950.1.1.6.21.1.1.9	counter64	read-only	Total number of calls that did not transition to active state because of normal termination since the last time the nCIte was reboot.
custH323CallsDropped	1.3.6.1.4.1.10950.1.1.6.21.1.1.10	counter64	read-only	Total number of calls that were dropped due to exceeding adminision control since the last time the nCite was reboot.
custH323CallsDegraded	1.3.6.1.4.1.10950.1.1.6.21.1.1.11	counter64	read-only	Total number of calls that were processed in a degraded state due to exceeding admission control since the last time the nCIte was reboot.
custH323CallMediaTimeouts	1.3.6.1.4.1.10950.1.1.6.21.1.1.12	counter64	read-only	Total number of times a call was terminated because of a RTP media timeout since the last time the nCIte was reboot.
custH323CallInitTimeouts	1.3.6.1.4.1.10950.1.1.6.21.1.1.13	counter64	read-only	Total number of times a SIP timout occurred after the receipt of the initial INVITE and before the ACK is received for the INVITE since the last time the nCite was reboot.
custH323TermTimeouts	1.3.6.1.4.1.10950.1.1.6.21.1.1.14	counter64	read-only	Total number of times a SIP timout occurred after the receipt of the BYE and before the ACK is received for the BYE since the last time the nCIte was reboot.
custH323CallsProcessed	1.3.6.1.4.1.10950.1.1.6.21.1.1.15	counter64	read-only	Total number of calls that have been processed since the nCIte was last reboot. This will be the sum of custH323CallsCompletedSuccess, custH323CallsFailed, custH323CallsAbandoned, custH323CallsDropped, custH323AuthFailures
custH323PeakLocalCalls	1.3.6.1.4.1.10950.1.1.6.21.1.1.16	counter64	read-only	Peak number of local calls
custH323AuthenticationChallenges	1.3.6.1.4.1.10950.1.1.6.21.1.1.17	counter64	read-only	Number of authentication challanges
custH323RTPFWTraversalTimeouts	1.3.6.1.4.1.10950.1.1.6.21.1.1.18	counter64	read-only	Number of RTP forward traversal timeouts
custH323SameSideActiveCalls	1.3.6.1.4.1.10950.1.1.6.21.1.1.19	counter64	read-only	Number of same side active calls
custH323NormalActiveCalls	1.3.6.1.4.1.10950.1.1.6.21.1.1.20	counter64	read-only	Number of normal active calls
custH323PeakNormalActiveCalls	1.3.6.1.4.1.10950.1.1.6.21.1.1.21	counter64	read-only	Maximum number of active normal calls since the statistics were last reset.
custVoIpStats	1.3.6.1.4.1.10950.1.1.6.22
custVoIpStatsTable	1.3.6.1.4.1.10950.1.1.6.22.1		no-access	Description
custVoIpStatsEntry	1.3.6.1.4.1.10950.1.1.6.22.1.1		no-access	Row Description
custVoIpId	1.3.6.1.4.1.10950.1.1.6.22.1.1.1	integer32	read-only	Customer ID as it is defined in the EMS database and the XML file provisioned to the nCIte
custVoIpCallsInitiating	1.3.6.1.4.1.10950.1.1.6.22.1.1.2	counter64	read-only	Real-time stat of calls that are being initiated after receiving the initial INVITE SIP request.
custVoIpLocalActiveCalls	1.3.6.1.4.1.10950.1.1.6.22.1.1.3	counter64	read-only	Real-time stat that is the number of active calls that are local
custVoIpTermCalls	1.3.6.1.4.1.10950.1.1.6.22.1.1.4	counter64	read-only	Real-time stat that is the number of calls in the TERMINATING state after a BYE SIP request.
custVoIpPeakTotalActiveCalls	1.3.6.1.4.1.10950.1.1.6.22.1.1.5	counter64	read-only	Peak number of total active calls since the last nCite reboot.
custVoIpTotalActiveCalls	1.3.6.1.4.1.10950.1.1.6.22.1.1.6	counter64	read-only	Total number of active calls. custVoIpStatLocalActvieCalls + custVoIpStatNonLocalActiveCalls
custVoIpCallsCompletedSuccess	1.3.6.1.4.1.10950.1.1.6.22.1.1.7	counter64	read-only	Total number of calls that have been completed successfully since the last time the nCIte was reboot.
custVoIpCallsFailed	1.3.6.1.4.1.10950.1.1.6.22.1.1.8	counter64	read-only	Total number of calls that completed due to some failure since the last time the nCite was reboot.
custVoIpCallsAbandoned	1.3.6.1.4.1.10950.1.1.6.22.1.1.9	counter64	read-only	Total number of calls that did not transition to active state because of normal termination since the last time the nCIte was reboot.
custVoIpCallsDropped	1.3.6.1.4.1.10950.1.1.6.22.1.1.10	counter64	read-only	Total number of calls that were dropped due to exceeding adminision control since the last time the nCite was reboot.
custVoIpCallsDegraded	1.3.6.1.4.1.10950.1.1.6.22.1.1.11	counter64	read-only	Total number of calls that were processed in a degraded state due to exceeding admission control since the last time the nCIte was reboot.
custVoIpCallMediaTimeouts	1.3.6.1.4.1.10950.1.1.6.22.1.1.12	counter64	read-only	Total number of times a call was terminated because of a RTP media timeout since the last time the nCIte was reboot.
custVoIpCallInitTimeouts	1.3.6.1.4.1.10950.1.1.6.22.1.1.13	counter64	read-only	Total number of times a SIP timout occurred after the receipt of the initial INVITE and before the ACK is received for the INVITE since the last time the nCite was reboot.
custVoIpTermTimeouts	1.3.6.1.4.1.10950.1.1.6.22.1.1.14	counter64	read-only	Total number of times a SIP timout occurred after the receipt of the BYE and before the ACK is received for the BYE since the last time the nCIte was reboot.
custVoIpCallsProcessed	1.3.6.1.4.1.10950.1.1.6.22.1.1.15	counter64	read-only	Total number of calls that have been processed since the nCIte was last reboot. This will be the sum of custVoIpCallsCompletedSuccess, custVoIpCallsFailed, custVoIpCallsAbandoned, custVoIpCallsDropped, custVoIpAuthFailures
custVoIpPeakLocalCalls	1.3.6.1.4.1.10950.1.1.6.22.1.1.16	counter64	read-only	Peak number of local calls
custVoIpAuthenticationChallenges	1.3.6.1.4.1.10950.1.1.6.22.1.1.17	counter64	read-only	Number of authentication challanges
custVoIpRTPFWTraversalTimeouts	1.3.6.1.4.1.10950.1.1.6.22.1.1.18	counter64	read-only	Number of RTP forward traversal timeouts
custVoIpSameSideActiveCalls	1.3.6.1.4.1.10950.1.1.6.22.1.1.19	counter64	read-only	Number of same side active calls
custVoIpNormalActiveCalls	1.3.6.1.4.1.10950.1.1.6.22.1.1.20	counter64	read-only	Number of normal active calls
custVoIpPeakNormalActiveCalls	1.3.6.1.4.1.10950.1.1.6.22.1.1.21	counter64	read-only	Maximum number of active normal calls since the statistics were last reset.
mediaStats	1.3.6.1.4.1.10950.1.1.6.23
mediaStatCurrentAudioSessions	1.3.6.1.4.1.10950.1.1.6.23.1	counter64	read-only	Current number of active audio sessions
mediaStatPeakAudioSessions	1.3.6.1.4.1.10950.1.1.6.23.2	counter64	read-only	Peak number of audio sessions
mediaStatTotalAudioSessions	1.3.6.1.4.1.10950.1.1.6.23.3	counter64	read-only	Total accumulated audio sessions
mediaStatCurrentVideoSessions	1.3.6.1.4.1.10950.1.1.6.23.4	counter64	read-only	Current number of active video sessions
mediaStatPeakVideoSessions	1.3.6.1.4.1.10950.1.1.6.23.5	counter64	read-only	Peak number of video sessions
mediaStatTotalVideoSessions	1.3.6.1.4.1.10950.1.1.6.23.6	counter64	read-only	Total accumulated video sessions
mediaStatCurrentFaxSessions	1.3.6.1.4.1.10950.1.1.6.23.7	counter64	read-only	Current number of active fax sessions
mediaStatPeakFaxSessions	1.3.6.1.4.1.10950.1.1.6.23.8	counter64	read-only	Peak number of fax sessions
mediaStatTotalFaxSessions	1.3.6.1.4.1.10950.1.1.6.23.9	counter64	read-only	Total accumulated number of fax sessions
mediaStatTotalFailures	1.3.6.1.4.1.10950.1.1.6.23.10	counter64	read-only	Total accumulated number of media failures
h323RegStats	1.3.6.1.4.1.10950.1.1.6.24
h323RegStatActiveReg	1.3.6.1.4.1.10950.1.1.6.24.1	counter64	read-only	Current number of active H.323 registrations
h323RegStatExpiredReg	1.3.6.1.4.1.10950.1.1.6.24.2	counter64	read-only	Number of expired H.323 registrations
h323RegStatUnauthorizedReg	1.3.6.1.4.1.10950.1.1.6.24.3	counter64	read-only	Number of unauthorized H.323 regristrations
h323RegStatPeakActiveReg	1.3.6.1.4.1.10950.1.1.6.24.4	counter64	read-only	Peak number of active H.323 registrations
h323RegStatUpdateComplete	1.3.6.1.4.1.10950.1.1.6.24.5	counter64	read-only	Number of H.323 registration updates completed successfully
h323RegStatUpdateFailures	1.3.6.1.4.1.10950.1.1.6.24.6	counter64	read-only	Number of H.323 registration update failures
h323RegStatAuthFailures	1.3.6.1.4.1.10950.1.1.6.24.7	counter64	read-only	Number of H.323 registration authentication failures
custH323RegStats	1.3.6.1.4.1.10950.1.1.6.25
custH323RegStatsTable	1.3.6.1.4.1.10950.1.1.6.25.1		no-access	Description
custH323RegStatsEntry	1.3.6.1.4.1.10950.1.1.6.25.1.1		no-access	Row Description
custH323RegStatId	1.3.6.1.4.1.10950.1.1.6.25.1.1.1	integer32	read-only	Unique identifier for this customer as specified in the XML file
custH323RegStatActiveReg	1.3.6.1.4.1.10950.1.1.6.25.1.1.2	counter64	read-only	Current number of active H.323 registrations for a customer
custH323RegStatExpiredReg	1.3.6.1.4.1.10950.1.1.6.25.1.1.3	counter64	read-only	Current number of expired H.323 registrations for a customer
custH323RegStatUnauthorizedReg	1.3.6.1.4.1.10950.1.1.6.25.1.1.4	counter64	read-only	The accumulated number of unauthorized H.323 registrations for a customer
custH323RegStatPeakActiveReg	1.3.6.1.4.1.10950.1.1.6.25.1.1.5	counter64	read-only	Peak number of active H.323 registrations for a customer
custH323RegStatUpdateComplete	1.3.6.1.4.1.10950.1.1.6.25.1.1.6	counter64	read-only	The accumulated number of updated H.323 registrations for a customer
custH323RegStatUpdateFailures	1.3.6.1.4.1.10950.1.1.6.25.1.1.7	counter64	read-only	The accumulated number of failed H.323 registration updates for a customer
custH323RegStatAuthFailures	1.3.6.1.4.1.10950.1.1.6.25.1.1.8	counter64	read-only	The accumulated number of H.323 registration authentication faliures for a customer
sipCommonStats	1.3.6.1.4.1.10950.1.1.6.26
sipCommonStatsDiscontinuityTimer	1.3.6.1.4.1.10950.1.1.6.26.1	timeticks	read-only	The number of centi-seconds since the sipCommonStats were last reset. When the value of this attribute is reset a discontinuity of all of the counters in the sipCommonStats has occured. This should cause the management application to not compute deltas for the current polling interval. These statistics can be reset using the 'clear stats common sip' command on the nCite CLI. These statistics can also be cleared by issuing an SNMP Set to nCiteStatsReset with the value of sipCommonStats ( 10 ).
sipCommonStatsScalars	1.3.6.1.4.1.10950.1.1.6.26.2
sipCommonStatsTotalMessageErrors	1.3.6.1.4.1.10950.1.1.6.26.2.1	counter32	read-only	Cumulative tally, since sipCommonStatsDiscontinuityTimer was reset, of SIP message errors encountered. Discontinuities in this counter can be detected by the value of sipCommonStatsDiscontinuityTimer being reset.
sipCommonStatsTotalMessageRoutingFailures	1.3.6.1.4.1.10950.1.1.6.26.2.2	counter32	read-only	Cumulative tally, since sipCommonStatsDiscontinuityTimer was reset, of failures to determine routing for a SIP message. Discontinuities in this counter can be detected by the value of sipCommonStatsDiscontinuityTimer being reset.
sipCommonStatsTotalMessageTransmitFailures	1.3.6.1.4.1.10950.1.1.6.26.2.3	counter32	read-only	Cumulative tally, since sipCommonStatsDiscontinuityTimer was reset, of failures to transmit a SIP message. Discontinuities in this counter can be detected by the value of sipCommonStatsDiscontinuityTimer being reset.
sipCommonStatsTotalAuthenticationFailures	1.3.6.1.4.1.10950.1.1.6.26.2.4	counter32	read-only	Cumulative tally, since sipCommonStatsDiscontinuityTimer was reset, of SIP messages that failed Customer Authentication, Sender or Target. Discontinuities in this counter can be detected by the value of sipCommonStatsDiscontinuityTimer being reset.
sipEvtDlgStats	1.3.6.1.4.1.10950.1.1.6.27
sipEvtDlgStatsDiscontinuityTimer	1.3.6.1.4.1.10950.1.1.6.27.1	timeticks	read-only	The number of centi-seconds since the sipEvtDlgStats were last reset. When the value of this attribute is reset a discontinuity of all of the counters in the sipEvtDlgStats has occured. This should cause the management application to not compute deltas for the current polling interval. These statistics can be reset using the 'clear stats eventdialog' command on the nCite CLI.These statistics can also be cleared by issuing an SNMP Set to nCiteStatsReset with the value of sipEvtDlgStats ( 11 ).
sipEvtDlgStatsScalars	1.3.6.1.4.1.10950.1.1.6.27.2
sipEvtDlgStatsActiveDialogs	1.3.6.1.4.1.10950.1.1.6.27.2.1	gauge32	read-only	The current number of Event Dialogs successfully created by a SUBSCRIBE request.
sipEvtDlgStatsPeakActiveDialogs	1.3.6.1.4.1.10950.1.1.6.27.2.2	gauge32	read-only	The peak number of Active Dialogs at one time since startup or the last clear.
sipEvtDlgStatsTerminatedDialogs	1.3.6.1.4.1.10950.1.1.6.27.2.3	counter32	read-only	Cumulative tally, since sipEvtDlgStatsDiscontinuityTimer was reset, of Event Dialogs that were terminated via NOTIFY with Subscription-state of terminated, or du e to User Delete. Discontinuities in this counter can be detected by the value of sipEvtDlgStatsDiscontinuityTimer being reset.
sipEvtDlgStatsExpiredDialogs	1.3.6.1.4.1.10950.1.1.6.27.2.4	counter32	read-only	Cumulative tally, since sipEvtDlgStatsDiscontinuityTimer was reset, of Event Dialogs that were terminated due to expiration for the entire system. Discontinuities in this counter can be detected by the value of sipEvtDlgStatsDiscontinuityTimer being reset.
sipEvtDlgStatsFailedDialogs	1.3.6.1.4.1.10950.1.1.6.27.2.5	counter32	read-only	Cumulative tally, since sipEvtDlgStatsDiscontinuityTimer was reset, of Event Dialogs that were terminated due to error reponse to establishing SUBSCRIBE, an Abort Response to mid-dialog SUBSCRIBE or NOTIFY, a Challenge Answer Timeout, or a Transaction Timeout on any SUBSCRIBE or NOTIFY for the entire system. Discontinuities in this counter can be detected by the value of sipEvtDlgStatsDiscontinuityTimer being reset.
sipEvtDlgStatsUnauthorizedDialogs	1.3.6.1.4.1.10950.1.1.6.27.2.6	counter32	read-only	Cumulative tally, since sipEvtDlgStatsDiscontinuityTimer was reset, of Event Dialogs that were not created or were terminated due to failing authorization (exceeding Global Event Dialog SAC or Customer Event Dialog SAC) for the entire system. Discontinuities in this counter can be detected by the value of sipEvtDlgStatsDiscontinuityTimer being reset.
sipEvtDlgStatsAuthenticationChallenges	1.3.6.1.4.1.10950.1.1.6.27.2.7	counter32	read-only	Cumulative tally, since sipEvtDlgStatsDiscontinuityTimer was reset, of Event Dialogs that received an Authentication Challenge response (401/407) to the establishing SUBSCRIBE for the entire system. Discontinuities in this counter can be detected by the value of sipEvtDlgStatsDiscontinuityTimer being reset.
sipEvtDlgCustStatsTable	1.3.6.1.4.1.10950.1.1.6.27.3		no-access	Description
sipEvtDlgCustStatsEntry	1.3.6.1.4.1.10950.1.1.6.27.3.1		no-access	Row Description
sipEvtDlgCustStatsIndex	1.3.6.1.4.1.10950.1.1.6.27.3.1.1	integer32	read-only	Customer ID as it is defined in the EMS database and the XML file provisioned to the nCIte
sipEvtDlgCustStatsActiveDialogs	1.3.6.1.4.1.10950.1.1.6.27.3.1.2	gauge32	read-only	The current number of Event Dialogs successfully created by a SUBSCRIBE request for this customer.
sipEvtDlgCustStatsPeakActiveDialogs	1.3.6.1.4.1.10950.1.1.6.27.3.1.3	gauge32	read-only	The peak number of Active Dialogs at one time since startup or the last clear for this customer.
sipEvtDlgCustStatsTerminatedDialogs	1.3.6.1.4.1.10950.1.1.6.27.3.1.4	counter32	read-only	Cumulative tally, since sipEvtDlgStatsDiscontinuityTimer was reset, of Event Dialogs that were terminated via NOTIFY with Subscription-state of terminated, or due to User Delete for this customer. Discontinuities in this counter can be detected by the value of sipEvtDlgStatsDiscontinuityTimer being reset.
sipEvtDlgCustStatsExpiredDialogs	1.3.6.1.4.1.10950.1.1.6.27.3.1.5	counter32	read-only	Cumulative tally, since sipEvtDlgStatsDiscontinuityTimer was reset, of Event Dialogs that were terminated due to expiration for this customer. Discontinuities in this counter can be detected by the value of sipEvtDlgStatsDiscontinuityTimer being reset.
sipEvtDlgCustStatsFailedDialogs	1.3.6.1.4.1.10950.1.1.6.27.3.1.6	counter32	read-only	Cumulative tally, since sipEvtDlgStatsDiscontinuityTimer was reset, of Event Dialogs that were terminated due to error reponse to establishing SUBSCRIBE, an Abort Response to mid-dialog SUBSCRIBE or NOTIFY, a Challenge Answer Timeout, or a Transaction Timeout on any SUBSCRIBE or NOTIFY for this customer. Discontinuities in this counter can be detected by the value of sipEvtDlgStatsDiscontinuityTimer being reset.
sipEvtDlgCustStatsUnauthorizedDialogs	1.3.6.1.4.1.10950.1.1.6.27.3.1.7	counter32	read-only	Cumulative tally, since sipEvtDlgStatsDiscontinuityTimer was reset, of Event Dialogs that were not created or were terminated due to failing authorization (exceeding Global Event Dialog SAC or Customer Event Dialog SAC) for this customer. Discontinuities in this counter can be detected by the value of sipEvtDlgStatsDiscontinuityTimer being reset.
sipEvtDlgCustStatsAuthenticationChallenges	1.3.6.1.4.1.10950.1.1.6.27.3.1.8	counter32	read-only	Cumulative tally, since sipEvtDlgStatsDiscontinuityTimer was reset, of Event Dialogs that received an Authentication Challenge response (401/407) to the establishing SUBSCRIBE for this customer. Discontinuities in this counter can be detected by the value of sipEvtDlgStatsDiscontinuityTimer being reset.
diagnostics	1.3.6.1.4.1.10950.1.1.7
runDiagGroup	1.3.6.1.4.1.10950.1.1.7.2
diagType	1.3.6.1.4.1.10950.1.1.7.2.1	integer	read-write	Diagnostic Type Enumeration: 'portExtLoopback': 8, 'cardIntLoopback': 5, 'cardExtLoopback': 6, 'nCiteInterfaceIntLoopback': 3, 'portIntLoopback': 7, 'nCiteFullIntLoopback': 1, 'nCiteFullExtLoopback': 2, 'nCiteInterfaceExtLoopback': 4.
diagDeviceSlotNum	1.3.6.1.4.1.10950.1.1.7.2.2	integer32	read-write	Slot that contains the device
diagDevPortNum	1.3.6.1.4.1.10950.1.1.7.2.3	integer32	read-write	Port number used for the diagnostic. Should be defaulted if not used.
diagStartCmd	1.3.6.1.4.1.10950.1.1.7.2.4	integer	read-write	Setting of this value causes the nCite to perform the requested diagnostic Enumeration: 'default': 0, 'runDiag': 1.
diagResultsTable	1.3.6.1.4.1.10950.1.1.7.3		no-access	Table contains historical results of diagnostics
diagResultsEntry	1.3.6.1.4.1.10950.1.1.7.3.1		no-access	Row Description
diagRsltIndex	1.3.6.1.4.1.10950.1.1.7.3.1.1	integer32	read-only	Column Description
diagRsltStartTimeStamp	1.3.6.1.4.1.10950.1.1.7.3.1.2	dateandtime	read-only	Time that the diagnostic was started
diagRsltCompleteTimeStamp	1.3.6.1.4.1.10950.1.1.7.3.1.3	dateandtime	read-only	Date/time the diagnostic completed
diagRsltDesc	1.3.6.1.4.1.10950.1.1.7.3.1.4	displaystring	read-only	Description of the results
diagRsltType	1.3.6.1.4.1.10950.1.1.7.3.1.5	integer	read-only	Description Enumeration: 'portExtLoopback': 8, 'cardIntLoopback': 5, 'cardExtLoopback': 6, 'nCiteInterfaceIntLoopback': 3, 'portIntLoopback': 7, 'nCiteFullIntLoopback': 1, 'nCiteFullExtLoopback': 2, 'nCiteInterfaceExtLoopback': 4.
diagRsltDeviceSlotNum	1.3.6.1.4.1.10950.1.1.7.3.1.6	integer32	read-only	Device slot number that executed the diagnostic
diagRsltDevicePortNum	1.3.6.1.4.1.10950.1.1.7.3.1.7	integer32	read-only	Device port number
diagStartedTrap	1.3.6.1.4.1.10950.1.1.7.4			This trap is sent when the diagnostic is started
diagCompleteTrap	1.3.6.1.4.1.10950.1.1.7.5			This trap is sent when the diagnostic has completed
diagRsltID	1.3.6.1.4.1.10950.1.1.7.6	integer32	read-write	Table entry to delete
diagRsltAcknowledge	1.3.6.1.4.1.10950.1.1.7.7	integer	read-write	Acknowledge for diagnostic Enumeration: 'default': 0, 'acknowledge': 1.
diagStartedTrapAck	1.3.6.1.4.1.10950.1.1.7.8	integer	read-write	Diag start trap acknowledge flag Enumeration: 'ack': 1, 'notAck': 0.
diagCompleteTrapAck	1.3.6.1.4.1.10950.1.1.7.9	integer	read-write	Diag complete trap acknowledge flag Enumeration: 'ack': 1, 'notAck': 0.
diagStartedTrapAckSource	1.3.6.1.4.1.10950.1.1.7.10	ipaddress	read-write	Identifies the Snmp Manager which sets the trap ack.
diagCompleteTrapAckSource	1.3.6.1.4.1.10950.1.1.7.11	ipaddress	read-write	Identifies the Snmp Manager which sets the trap ack.
policyProvisioning	1.3.6.1.4.1.10950.1.1.8
activeImgName	1.3.6.1.4.1.10950.1.1.8.1	displaystring	read-only	Name of the XML file that is currently active on the nCite
activeImgPidSideAFilename	1.3.6.1.4.1.10950.1.1.8.2	displaystring	read-only	Filename of the PID map for side A
activeImgPidSideBFilename	1.3.6.1.4.1.10950.1.1.8.3	displaystring	read-only	Filename of the PID map for side B
activeImgDwnldTimeStamp	1.3.6.1.4.1.10950.1.1.8.4	dateandtime	read-only	Date/time that the active image file was downloaded
activeImgBuildStartTimeStamp	1.3.6.1.4.1.10950.1.1.8.5	dateandtime	read-only	Date/time that the active image started building
activeImgBuildCompleteTimeStamp	1.3.6.1.4.1.10950.1.1.8.6	dateandtime	read-only	Date/time that the active image completed building
activeImgActivatedTimeStamp	1.3.6.1.4.1.10950.1.1.8.7	dateandtime	read-only	Date/time that the active image was activated
commitImgName	1.3.6.1.4.1.10950.1.1.8.8	displaystring	read-only	Name of the XML file that was committed
commitImgDwnldTimeStamp	1.3.6.1.4.1.10950.1.1.8.9	dateandtime	read-only	Date/time that the committed image was downloaded
commitImgBuildStartTimeStamp	1.3.6.1.4.1.10950.1.1.8.10	dateandtime	read-only	Date/time that the committed image started building
commitImgBuildCompleteTimeStamp	1.3.6.1.4.1.10950.1.1.8.11	dateandtime	read-only	Date/time that the committed image completed building
commitImgActivatedTimeStamp	1.3.6.1.4.1.10950.1.1.8.12	dateandtime	read-only	Date/time that the committed image was activated
commitImgTimeStamp	1.3.6.1.4.1.10950.1.1.8.13	dateandtime	read-only	Date/time that the image was committed
newActiveImgTrap	1.3.6.1.4.1.10950.1.1.8.14			This trap is sent whenever a new image activated
newCommittedImgTrap	1.3.6.1.4.1.10950.1.1.8.15			This trap is sent whenever an active image is committed
nextImgName	1.3.6.1.4.1.10950.1.1.8.16	displaystring	read-only	Name of the xml file that has been downloaded for a build
nextImgState	1.3.6.1.4.1.10950.1.1.8.17	integer	read-only	This reflects the state of the next image. Enumeration: 'buildComplete': 2, 'cleared': 0, 'buildInProgress': 1.
nextImgDwnldTimeStamp	1.3.6.1.4.1.10950.1.1.8.18	dateandtime	read-only	Date/time that the image was downloaded
nextImgBuildStartTimeStamp	1.3.6.1.4.1.10950.1.1.8.19	dateandtime	read-only	Date/time that the next image started building. This field will be defaulted if building has not started
nextImgBuildCompleteTimeStamp	1.3.6.1.4.1.10950.1.1.8.20	dateandtime	read-only	Date/time that the next image completed building. This field will be defaulted of it was not built.
buildStartedTrap	1.3.6.1.4.1.10950.1.1.8.21			Trap sent when a build is started on the nCite
buildCompleteTrap	1.3.6.1.4.1.10950.1.1.8.22			Description
newNextTrap	1.3.6.1.4.1.10950.1.1.8.23			This trap is sent whenever an XML file is downloaded to the nCite
newActiveImgTrapAck	1.3.6.1.4.1.10950.1.1.8.24	integer	read-write	New active image trap acknowledge flag Enumeration: 'ack': 1, 'notAck': 0.
newCommittedImgTrapAck	1.3.6.1.4.1.10950.1.1.8.25	integer	read-write	New committed image trap acknowlege flag Enumeration: 'ack': 1, 'notAck': 0.
buildStartedTrapAck	1.3.6.1.4.1.10950.1.1.8.26	integer	read-write	Build started trap acknowledge flag Enumeration: 'ack': 1, 'notAck': 0.
buildCompleteTrapAck	1.3.6.1.4.1.10950.1.1.8.27	integer	read-write	Build complete trap acknowledge flag Enumeration: 'ack': 1, 'notAck': 0.
newNextTrapAck	1.3.6.1.4.1.10950.1.1.8.28	integer	read-write	New next trap acknowledge flag Enumeration: 'ack': 1, 'notAck': 0.
newActiveImgTrapAckSource	1.3.6.1.4.1.10950.1.1.8.29	ipaddress	read-write	Identifies the Snmp Manager which sets the trap ack.
newCommittedImgTrapAckSource	1.3.6.1.4.1.10950.1.1.8.30	ipaddress	read-write	Identifies the Snmp Manager which sets the trap ack.
buildStartedTrapAckSource	1.3.6.1.4.1.10950.1.1.8.31	ipaddress	read-write	Identifies the Snmp Manager that sets the trap ack.
buildCompleteTrapAckSource	1.3.6.1.4.1.10950.1.1.8.32	ipaddress	read-write	Identifies the Snmp Manager which sets the trap ack.
newNextTrapAckSource	1.3.6.1.4.1.10950.1.1.8.33	ipaddress	read-write	Identifies the Snmp Manager which sets the trap ack.
nCiteStaticRoutes	1.3.6.1.4.1.10950.1.1.9
staticRoutesTable	1.3.6.1.4.1.10950.1.1.9.1		no-access	Description
staticRoutesEntry	1.3.6.1.4.1.10950.1.1.9.1.1		no-access	Row Description
staticRouteDest	1.3.6.1.4.1.10950.1.1.9.1.1.1	ipaddress	read-write	Column Description
staticRouteNextHop	1.3.6.1.4.1.10950.1.1.9.1.1.2	ipaddress	read-write	Next hop ip address
staticRouteNetMask	1.3.6.1.4.1.10950.1.1.9.1.1.3	ipaddress	read-write	Network mask
staticRouteIngressVlanTag	1.3.6.1.4.1.10950.1.1.9.1.1.4	integer32	read-write	Static route Ingress VLAN tag; 4096 when not applicable
staticRouteMetric1	1.3.6.1.4.1.10950.1.1.9.1.1.5	integer32	read-write	The primary routing metric for this static route; -1 if not applicable
staticRouteAdminState	1.3.6.1.4.1.10950.1.1.9.1.1.6	integer	read-write	Enables/disables the route Enumeration: 'enable': 1, 'disable': 2.
staticRouteIngressProtocol	1.3.6.1.4.1.10950.1.1.9.1.1.7	integer	read-write	Description Enumeration: 'vlan': 1, 'general': 0.
staticRouteOperState	1.3.6.1.4.1.10950.1.1.9.1.1.8	displaystring	read-only	Operational state of static route
staticRouteType	1.3.6.1.4.1.10950.1.1.9.1.1.9	integer	read-only	userDefined = Static Route; user can not modify discovered, DC Host, or DC Net routes Enumeration: 'userDefined': 1, 'discovered': 2, 'dcNetRoute': 6, 'mgmtRoute': 4, 'defaultRoute': 3, 'dcHostRoute': 5.
staticRouteRowStatus	1.3.6.1.4.1.10950.1.1.9.1.1.10	rowstatus	read-only	Allows adding and deleting of entries
staticRouteVrdTag	1.3.6.1.4.1.10950.1.1.9.1.1.11	integer32	read-only	Virtual Routing Domain associated with the interface for this route
staticRouteEgressVlan	1.3.6.1.4.1.10950.1.1.9.1.1.12	integer32	read-only	Egress Vlan associated with interface
staticRouteChange	1.3.6.1.4.1.10950.1.1.9.2			This trap is sent whenever changes are made to a static route
staticRoutesRefreshNeeded	1.3.6.1.4.1.10950.1.1.9.3	integer	read-write	This field indicates that changes were made to the static routes Enumeration: 'default': 0, 'refresh': 1.
staticRoutesRefreshTrap	1.3.6.1.4.1.10950.1.1.9.4			This trap is sent whenever static route states change
staticRouteChangeTrapAck	1.3.6.1.4.1.10950.1.1.9.5	integer	read-write	Static route change trap acknowledge flag Enumeration: 'ack': 1, 'notAck': 0.
staticRouteRefreshTrapAck	1.3.6.1.4.1.10950.1.1.9.6	integer	read-write	Static route change trap acknowledge flag Enumeration: 'ack': 1, 'notAck': 0.
staticRouteChangeTrapAckSource	1.3.6.1.4.1.10950.1.1.9.7	ipaddress	read-write	Identifies the Snmp Manager which sets the trap ack.
staticRouteRefreshTrapAckSource	1.3.6.1.4.1.10950.1.1.9.8	ipaddress	read-write	Identifies the Snmp Manager which sets the trap ack.
nCiteArpConfig	1.3.6.1.4.1.10950.1.1.10
arpVerifTimerRetryCount	1.3.6.1.4.1.10950.1.1.10.1	integer32	read-write	Defines how often the nCite performs ARPs
arpNextHopIP	1.3.6.1.4.1.10950.1.1.10.2	ipaddress	read-only	Next hop ip address
arpMacAddr	1.3.6.1.4.1.10950.1.1.10.3	displaystring	read-only	mac address
arpRefreshNeeded	1.3.6.1.4.1.10950.1.1.10.4	integer32	read-write	This value is used in a trap to notifiy the EMS when the ARP table needs to be refreshed.
arpRefreshTrap	1.3.6.1.4.1.10950.1.1.10.5			This trap is sent whenever the ARP table changes on the nCite
arpRefreshTrapAck	1.3.6.1.4.1.10950.1.1.10.6	integer	read-write	This value is set when the EMS acknowledges receipt of the trap Enumeration: 'ack': 1, 'notAck': 0.
arpUpdateMacTrap	1.3.6.1.4.1.10950.1.1.10.7			This trap is sent to update the mac address for a specific next hop address
arpUpdateMacTrapAck	1.3.6.1.4.1.10950.1.1.10.8	integer	read-write	Acknowledge field for update mac trap Enumeration: 'ack': 1, 'noAck': 0.
arpTrapOper	1.3.6.1.4.1.10950.1.1.10.9	integer	read-only	If value is addUpdate(0) then ARP entry should be created with next hop and mac address provided. If value is delete[1] then next hop and associated fields should be removed from the table. Enumeration: 'delete': 1, 'addUpdate': 0.
arpOperTimerFreq	1.3.6.1.4.1.10950.1.1.10.10	integer32	read-write	ARP Verification Timer Retry Count
arpOperTimerRetryCount	1.3.6.1.4.1.10950.1.1.10.11	integer32	read-write	ARP Operational Timer Frequency
arpVerifTimerChangeTrap	1.3.6.1.4.1.10950.1.1.10.12			This trap is sent whenever the ARP verification timers are changed
arpVerifTimerChangeTrapAck	1.3.6.1.4.1.10950.1.1.10.13	integer	read-write	Used to acknowledge the ARP verification timer change trap Enumeration: 'default': 0, 'ack': 1.
arpOperTimerChangeTrap	1.3.6.1.4.1.10950.1.1.10.14			This trap is sent whenever a change is made to the ARP Operational Timer
arpOperTimerChangeTrapAck	1.3.6.1.4.1.10950.1.1.10.15	integer	read-write	This is used to acknowledge the ARP Operational Timer Change Trap Enumeration: 'default': 0, 'ack': 1.
arpRefreshTrapAckSource	1.3.6.1.4.1.10950.1.1.10.16	ipaddress	read-write	Identifies the Snmp Manager which sets the trap ack.
arpUpdateMacTrapAckSource	1.3.6.1.4.1.10950.1.1.10.17	ipaddress	read-write	Identifies the Snmp Manager which sets the trap ack.
arpVerifTimerChangeTrapAckSource	1.3.6.1.4.1.10950.1.1.10.18	ipaddress	read-write	Identifies the Snmp Manager which sets the trap ack.
arpOperTimerChangeTrapAckSource	1.3.6.1.4.1.10950.1.1.10.19	ipaddress	read-write	Identifies the Snmp Manager which sets the trap ack.
ipPortConfig	1.3.6.1.4.1.10950.1.1.11
ipPortConfigTable	1.3.6.1.4.1.10950.1.1.11.1		no-access	This table contains the IP configuration for each port
ipPortConfigEntry	1.3.6.1.4.1.10950.1.1.11.1.1		no-access	Row Description
ipPortConfigSlotNum	1.3.6.1.4.1.10950.1.1.11.1.1.1	integer32	read-write	Slot number of line card
ipPortConfigPortNum	1.3.6.1.4.1.10950.1.1.11.1.1.2	integer32	read-write	Port Number
ipPortConfigIpAddr	1.3.6.1.4.1.10950.1.1.11.1.1.3	ipaddress	read-write	IP address of the physical port.
ipPortVlanTag	1.3.6.1.4.1.10950.1.1.11.1.1.4	integer32	read-write	VLAN associated with interface
ipPortConfigNetMask	1.3.6.1.4.1.10950.1.1.11.1.1.5	ipaddress	read-write	Net mask for the physical address
ipPortConfigAdminState	1.3.6.1.4.1.10950.1.1.11.1.1.6	integer	read-write	Administrative state of the interface Enumeration: 'enable': 1, 'disable': 2.
ipPortConfigOperState	1.3.6.1.4.1.10950.1.1.11.1.1.7	integer	read-only	Operational state of the interface Enumeration: 'enable': 1, 'disable': 2.
ipPortRowStatus	1.3.6.1.4.1.10950.1.1.11.1.1.8	rowstatus	read-only	This is used to add/remove items to the table
ipPortVrdTag	1.3.6.1.4.1.10950.1.1.11.1.1.9	integer32	read-write	Virtual Routing Domain
ipPortConfigChangeTrap	1.3.6.1.4.1.10950.1.1.11.2			This trap is sent whenever the IP config changes
ipPortConfigChangeTrapAck	1.3.6.1.4.1.10950.1.1.11.3	integer	read-write	IP port config change trap acknowledge flag Enumeration: 'ack': 1, 'notAck': 0.
ipPortPlaceHolder	1.3.6.1.4.1.10950.1.1.11.4	integer32	read-only	Placeholder - not used
ipPortRefreshOpStates	1.3.6.1.4.1.10950.1.1.11.5	integer32	read-only	This is used in a trap to tell the EMS to refresh the operational states associated with an interface
ipPortRefreshTrap	1.3.6.1.4.1.10950.1.1.11.6			This trap is sent when the operational states of the interfaces has changed
ipPortRefreshTrapAck	1.3.6.1.4.1.10950.1.1.11.7	integer	read-write	This value is set to acknowledge a trap from the nCite Enumeration: 'ack': 1, 'noAck': 0.
ipPortAutoNegTable	1.3.6.1.4.1.10950.1.1.11.8		no-access	This table is used to configure the auto-negotiate flag per port
ipPortAutoNegEntry	1.3.6.1.4.1.10950.1.1.11.8.1		no-access	Row Description
ipPortAutoNegSlotNum	1.3.6.1.4.1.10950.1.1.11.8.1.1	integer32	read-write	Column Description
ipPortAutoNegPortNum	1.3.6.1.4.1.10950.1.1.11.8.1.2	integer32	read-only	Column Description
ipPortAutoNegFlag	1.3.6.1.4.1.10950.1.1.11.8.1.3	integer	read-write	Enables/disabled auto-negotiation on the port Enumeration: 'enable': 1, 'disable': 0.
ipPortAutoNegChangeTrap	1.3.6.1.4.1.10950.1.1.11.9			This trap is sent whenever a port's auto-negotiation configuration is changed
ipPortAutoNegChangeTrapAck	1.3.6.1.4.1.10950.1.1.11.10	integer	read-write	This value is set to acknowlege the ipPortAutoNegChangeTrap Enumeration: 'default': 0, 'ack': 1.
ipPortConfigChangeTrapAckSource	1.3.6.1.4.1.10950.1.1.11.11	ipaddress	read-write	Identifies the Snmp Manager which sets the trap ack.
ipPortRefreshTrapAckSource	1.3.6.1.4.1.10950.1.1.11.12	ipaddress	read-write	Identifies the Snmp Manager which sets the trap ack.
ipPortAutoNegChangeTrapAckSource	1.3.6.1.4.1.10950.1.1.11.13	ipaddress	read-write	Identifies the Snmp Manager which sets the trap ack.
nCiteOutSyncFlag	1.3.6.1.4.1.10950.1.1.12	integer	read-write	This is currently not used. Enumeration: 'yes': 1, 'no': 0.
trapAckEnable	1.3.6.1.4.1.10950.1.1.13	integer	read-write	Trap acknowledgement enable/disable flag Enumeration: 'enable': 1, 'disable': 0.
linkUpTrapAck	1.3.6.1.4.1.10950.1.1.14	integer	read-write	Notification when link state changes to up. Enumeration: 'ack': 1, 'notAck': 0.
linkDownTrapAck	1.3.6.1.4.1.10950.1.1.15	integer	read-write	Notificatin when link state changes to down. Enumeration: 'ack': 1, 'notAck': 0.
nCiteNTA	1.3.6.1.4.1.10950.1.1.16
nCiteNTATable	1.3.6.1.4.1.10950.1.1.16.1		no-access	This table provides the state associated with each customer's NTA
nCiteNTAEntry	1.3.6.1.4.1.10950.1.1.16.1.1		no-access	Row Description
nCiteNTACustomerId	1.3.6.1.4.1.10950.1.1.16.1.1.1	integer32	read-only	Unique identifier associated with the customer. This is provided to the nCite via the XML file.
nCiteNTAStatus	1.3.6.1.4.1.10950.1.1.16.1.1.2	integer	read-only	Status associated with the connection to the NTA for each customer. Enumeration: 'noNTSClient': 0, 'configured': 1, 'connected': 2.
nCiteNTAReset	1.3.6.1.4.1.10950.1.1.16.2			Notifies the SNMP agent when a new XML file has been activated so the table can be reset.
nCiteRogue	1.3.6.1.4.1.10950.1.1.17
edrQuarantineListTable	1.3.6.1.4.1.10950.1.1.17.1		no-access	Table that contains the list of calls that have been detected rogue
edrQuarantineListEntry	1.3.6.1.4.1.10950.1.1.17.1.1		no-access	Row Description
erdQLUniqueId	1.3.6.1.4.1.10950.1.1.17.1.1.1	integer32	read-only	Unique identifier for the call
edrQLCallId	1.3.6.1.4.1.10950.1.1.17.1.1.2	displaystring	read-only	Call Id
edrQLTimestamp	1.3.6.1.4.1.10950.1.1.17.1.1.3	dateandtime	read-only	Date/time that the call was detected as rogue
edrQLFrom	1.3.6.1.4.1.10950.1.1.17.1.1.4	displaystring	read-only	From
edrQLTo	1.3.6.1.4.1.10950.1.1.17.1.1.5	displaystring	read-only	To
edrQLRequestURI	1.3.6.1.4.1.10950.1.1.17.1.1.6	displaystring	read-only	Request URI
edrQLSrcMediaIpPort	1.3.6.1.4.1.10950.1.1.17.1.1.7	displaystring	read-only	Source Media Ip Port
edrQLDestMediaAnchorIpPort	1.3.6.1.4.1.10950.1.1.17.1.1.8	displaystring	read-only	Destination Media Anchor IP Port
edrQLDestMediaIpPort	1.3.6.1.4.1.10950.1.1.17.1.1.9	displaystring	read-only	Destination Media IP Port
edrQLRogueStatus	1.3.6.1.4.1.10950.1.1.17.1.1.10	displaystring	read-only	Status of last check of traffic on the call; ROGUE means that traffic was detected; CLEAN means that no traffic was detected
edrQLPerformGarbageCollection	1.3.6.1.4.1.10950.1.1.17.1.1.11	integer	read-write	Description Enumeration: 'default': 0, 'start': 1.
erdQL2SrcMediaIpPort	1.3.6.1.4.1.10950.1.1.17.1.1.12	displaystring	read-only	Source Media IP port in opposite direction
erdQL2DestMediaAnchorIpPort	1.3.6.1.4.1.10950.1.1.17.1.1.13	displaystring	read-only	opposite flow's media anchor IP port
erdQL2DestMediaIpPort	1.3.6.1.4.1.10950.1.1.17.1.1.14	displaystring	read-only	Opposite flow's destination media IP port
edrGarbageCollectionState	1.3.6.1.4.1.10950.1.1.17.2	displaystring	read-only	Garbage collection state: In Progress, Success
edrLastGarbageCollection	1.3.6.1.4.1.10950.1.1.17.3	dateandtime	read-only	Date/time of last garbage collection
edrNextTrafficCheck	1.3.6.1.4.1.10950.1.1.17.4	dateandtime	read-only	Date/time of next check for traffic on each call in the quarantine list
edrPerformGarbageCollection	1.3.6.1.4.1.10950.1.1.17.5	integer	read-write	This OID is used to command the nCite to perform EDR garbage collection Enumeration: 'default': 0, 'start': 1.
edrGarbageCollectionStatus	1.3.6.1.4.1.10950.1.1.17.6	integer	read-only	Return status associated with last perform garbage collection request Enumeration: 'entryNotFound': 1, 'success': 0.
edrGarbageCollectionComplete	1.3.6.1.4.1.10950.1.1.17.7			Description
edrGarbageCollectionCompleteTrapAck	1.3.6.1.4.1.10950.1.1.17.8	integer	read-write	Description Enumeration: 'ack': 1, 'notAck': 0.
lrdTable	1.3.6.1.4.1.10950.1.1.17.9		no-access	Description
lrdEntry	1.3.6.1.4.1.10950.1.1.17.9.1		no-access	Row Description
lrdUniqueId	1.3.6.1.4.1.10950.1.1.17.9.1.1	integer32	read-only	Unique identifier for the call
lrdCallId	1.3.6.1.4.1.10950.1.1.17.9.1.2	displaystring	read-only	Call ID
lrdRequestURI	1.3.6.1.4.1.10950.1.1.17.9.1.3	displaystring	read-only	Request-URI
lrdFrom	1.3.6.1.4.1.10950.1.1.17.9.1.4	displaystring	read-only	From
lrdTo	1.3.6.1.4.1.10950.1.1.17.9.1.5	displaystring	read-only	To
lrdCallerState	1.3.6.1.4.1.10950.1.1.17.9.1.6	displaystring	read-only	Rogue/Clean
lrdCallerMediaAnchorIPPort	1.3.6.1.4.1.10950.1.1.17.9.1.7	displaystring	read-only	Media Anchor IP address and port
lrdCallerDestIPPort	1.3.6.1.4.1.10950.1.1.17.9.1.8	displaystring	read-only	Caller Destination IP address/port
lrdCallerSourceIPPort1	1.3.6.1.4.1.10950.1.1.17.9.1.9	displaystring	read-only	Caller IP address/Port
lrdCallerSourceIPPort2	1.3.6.1.4.1.10950.1.1.17.9.1.10	displaystring	read-only	Caller Source IP address/Port
lrdCallerReason	1.3.6.1.4.1.10950.1.1.17.9.1.11	displaystring	read-only	Caller Reason
lrdCallerTimeDetect	1.3.6.1.4.1.10950.1.1.17.9.1.12	dateandtime	read-only	Caller Time of Rogue Detection
lrdCalleeState	1.3.6.1.4.1.10950.1.1.17.9.1.13	displaystring	read-only	Rogue/Clean
lrdCalleeMediaAnchorIPPort	1.3.6.1.4.1.10950.1.1.17.9.1.14	displaystring	read-only	Callee Media Achor IP adress/Port
lrdCalleeDestIPPort	1.3.6.1.4.1.10950.1.1.17.9.1.15	displaystring	read-only	Callee Destination IP address/Port
lrdCalleeSourceIPPort1	1.3.6.1.4.1.10950.1.1.17.9.1.16	displaystring	read-only	Callee Source IP Address/Port 1
lrdCalleeSourceIPPort2	1.3.6.1.4.1.10950.1.1.17.9.1.17	displaystring	read-only	Callee Source IP Address/Port 2
lrdCalleeReason	1.3.6.1.4.1.10950.1.1.17.9.1.18	displaystring	read-only	Callee Reason
lrdCalleeTimeDetect	1.3.6.1.4.1.10950.1.1.17.9.1.19	displaystring	read-only	Callee Time of rogue detection
edrGarbageCollectionCompleteTrapAckSource	1.3.6.1.4.1.10950.1.1.17.10	ipaddress	read-write	Identifies the Snmp Manager which sets the trap ack.
licenseInfo	1.3.6.1.4.1.10950.1.1.18
licenseTable	1.3.6.1.4.1.10950.1.1.18.1		no-access	Description
licenseEntry	1.3.6.1.4.1.10950.1.1.18.1.1		no-access	Name value pair that describes the feature licensed
licenseIndex	1.3.6.1.4.1.10950.1.1.18.1.1.1	integer32	read-only	Column Description
licenseFeatureName	1.3.6.1.4.1.10950.1.1.18.1.1.2	integer	read-only	Encumerated value that can be used to translate into a descriptive name of feature that was licensed Enumeration: 'globalReg': 7, 'redundancy': 1, 'totalCust': 4, 'totalNtsCust': 5, 'nts': 2, 'globalCac': 0, 'totalVlanCust': 6, 'rogueDetect': 3.
licenseValue	1.3.6.1.4.1.10950.1.1.18.1.1.3	integer32	read-only	Value associated with licensed feature. If the license is just to enable/disable, the value for enable = 1, the value for disable = 2.
licenseInstallDate	1.3.6.1.4.1.10950.1.1.18.1.1.4	dateandtime	read-only	Date/time that the license was installed
licenseExpirationDate	1.3.6.1.4.1.10950.1.1.18.1.1.5	dateandtime	read-only	Date/time that the license will expire. This field is currently not used.
licenseFeatureDisplayName	1.3.6.1.4.1.10950.1.1.18.1.1.6	displaystring	read-only	The display name for the feature
licenseFileName	1.3.6.1.4.1.10950.1.1.18.2	displaystring	read-only	Name of the license file on the nCite
licenseFileChangeTrap	1.3.6.1.4.1.10950.1.1.18.3			This trap is sent whenever a new license file is loaded onto the nCite
licenseFileChangeTrapAck	1.3.6.1.4.1.10950.1.1.18.4	integer	read-write	This OID is used to acknowledge the receipt of the license file change trap. Enumeration: 'ack': 1, 'notAck': 0.
licenseFileChangeTrapAckSource	1.3.6.1.4.1.10950.1.1.18.5	ipaddress	read-write	Identifies the Snmp Manager which sets the trap ack.
nCiteRIPConfig	1.3.6.1.4.1.10950.1.1.19
nCiteRipState	1.3.6.1.4.1.10950.1.1.19.1	integer	read-only	State of RIP on the nCite; off = RIP is not running; on = RIP is running Enumeration: 'on': 1, 'off': 0.
nCiteRipPortConfigTable	1.3.6.1.4.1.10950.1.1.19.2		no-access	Ports are specified as primary or secondary
nCiteRipPortConfigEntry	1.3.6.1.4.1.10950.1.1.19.2.1		no-access	Row Description
nCiteRipPortSlotNum	1.3.6.1.4.1.10950.1.1.19.2.1.1	integer32	read-only	Card slot
nCiteRipPortNum	1.3.6.1.4.1.10950.1.1.19.2.1.2	integer32	read-write	Port ID
nCiteRipPortPrimary	1.3.6.1.4.1.10950.1.1.19.2.1.3	integer	read-only	Port is either primary or secondary Enumeration: 'default': 0, 'primary': 1, 'secondary': 2.
nCiteRipInterfacesTable	1.3.6.1.4.1.10950.1.1.19.3		no-access	This table is the list of interfaces on which RIP is enabled
nCiteRipInterfacesEntry	1.3.6.1.4.1.10950.1.1.19.3.1		no-access	Row Description
nCiteRipInterafacesSlotNum	1.3.6.1.4.1.10950.1.1.19.3.1.1	integer32	read-only	Slot Number
nCiteRipInterfacesPortNum	1.3.6.1.4.1.10950.1.1.19.3.1.2	integer32	read-only	Port number
nCiteRipInterfacesIPAddr	1.3.6.1.4.1.10950.1.1.19.3.1.3	ipaddress	read-only	IP address for which RIP is enabed
nCiteAuthConfig	1.3.6.1.4.1.10950.1.1.20
authConfigLocalOverride	1.3.6.1.4.1.10950.1.1.20.1	integer	read-only	Local override is used to have a different RADIUS server configuration than the EMS Enumeration: 'disabled': 0, 'enabled': 1.
authConfigRadiusRetryCount	1.3.6.1.4.1.10950.1.1.20.2	integer32	read-only	Number of retries for RADIUS Server communications
authConfigRadiusRetryInterval	1.3.6.1.4.1.10950.1.1.20.3	integer32	read-only	Number of seconds to wait for RADIUS Server response
authConfigRadiusServersTable	1.3.6.1.4.1.10950.1.1.20.4		no-access	Table containing the list of RADIUS servers configured on the nCite
authConfigRadiusServersEntry	1.3.6.1.4.1.10950.1.1.20.4.1		no-access	Row Description
authConfigRadiusServerIp	1.3.6.1.4.1.10950.1.1.20.4.1.1	ipaddress	read-only	IP address of RADIUS Server
authConfigRadiusServerPort	1.3.6.1.4.1.10950.1.1.20.4.1.2	integer32	read-only	RADIUS Server's Port
authConfigRadiusServerPriority	1.3.6.1.4.1.10950.1.1.20.4.1.3	integer32	read-only	Priority (order) with which the RADIUS Server is used for user authentication.
linkUpTrapAckSource	1.3.6.1.4.1.10950.1.1.21	ipaddress	read-write	Identifies the Snmp Manager which sets the trap ack.
linkDownTrapAckSource	1.3.6.1.4.1.10950.1.1.22	ipaddress	read-write	Identifies the Snmp Manager which sets the trap ack.
nrObjectIDs	1.3.6.1.4.1.10950.3
nrSessionBorderController	1.3.6.1.4.1.10950.3.1
nrSBCSE	1.3.6.1.4.1.10950.3.1.1
nrSBCwNcp	1.3.6.1.4.1.10950.3.1.1.1
nrSBCwNte	1.3.6.1.4.1.10950.3.1.1.2
nrSBCDE	1.3.6.1.4.1.10950.3.1.2