NSCTRAP: View SNMP OID List / Download MIB

VENDOR: NSC


 Home MIB: NSCTRAP
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC, IF-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 nsc 1.3.6.1.4.1.10
       nscMib 1.3.6.1.4.1.10.2
           nscManagement 1.3.6.1.4.1.10.2.2
               nscTraps 1.3.6.1.4.1.10.2.2.4
                   nscTrapsProtBindIndex 1.3.6.1.4.1.10.2.2.4.1 integer no-access
The communication protocols whose bind state changes would cause traps to be generated. Enumeration: 'xns': 5, 'ip': 1, 'bridging': 9, 'appleTalk': 3, 'decnet': 2, 'bridgingEc': 10, 'ipx': 4.
                   nscTrapsFddiSMTCFState 1.3.6.1.4.1.10.2.2.4.2 integer no-access
The attachment configuration for the station or concentrator. The values are the same as those defined in the SMT group in RFC-1285. Enumeration: 'cf4': 5, 'cf5': 6, 'cf2': 3, 'cf3': 4, 'cf0': 1, 'cf1': 2.
                   nscTrapsDecNetAreaNbr 1.3.6.1.4.1.10.2.2.4.3 octet string no-access
                   nscTrapsDecNetNodeNbr 1.3.6.1.4.1.10.2.2.4.4 octet string no-access
                   nscTrapsDecNetCircuitName 1.3.6.1.4.1.10.2.2.4.5 displaystring no-access
The name of a DECnet circuit.
                   nscTrapsDecNetEventReason 1.3.6.1.4.1.10.2.2.4.6 displaystring no-access
The reason that causes the routing event to happen. Possible reasons are: SYNC_LOST (0), DATA_ERRORS (1), UNEXPECTED_PKT_TYPE (2), ROUTING_UPDATE_CHECKSUM_ERROR (3), ADJ_ADDR_CHANGE (4), VERIF_RECV_TIMEOUT (5), VERSION_SKEW (6), ADJ_ADDR_OUT_OF_RANGE (7), ADJ_BLOCK_SIZE_TOO_SMALL (8), INVALID_VERIF_SEED_VALUE (9), ADJ_LIST_RECV_TIMEOUT (10), ADJ_LIST_RECV_INVALID_DATA (11), CALL_FAILED (12), VERIF_PASSWORD_REQ_FROM_PIII_NODE (13), DROPPED_BY_ADJ_NODE (14).
                   nscTrapsDecNetReachStatus 1.3.6.1.4.1.10.2.2.4.7 integer no-access
The reachable status of a node or area. Enumeration: 'unreachable': 2, 'reachable': 1.
                   nscTrapsVcpPortName 1.3.6.1.4.1.10.2.2.4.8 displaystring no-access
The name of the VCP port.
                   nscTrapsVcpLogicalState 1.3.6.1.4.1.10.2.2.4.9 displaystring no-access
The logical state of a VCP port. The possible states are ACTIVE, DOWN, DISABLED.
                   nscTrapsVcpPhysicalState 1.3.6.1.4.1.10.2.2.4.10 displaystring no-access
The physical state of a VCP port. The possible states are Off, On, Broken_Cannot_IO, Broken_Purge, Broken_Reconfigure, Broken_Misconfigure.
                     protocolBound 1.3.6.1.4.1.10.2.2.40.1
A protocolBound trap is sent when a protocol is bound to an interface.
                     protocolUnbound 1.3.6.1.4.1.10.2.2.40.2
A protocolBound trap is sent when a protocol is unbound from an interface.
                     physicalLinkUp 1.3.6.1.4.1.10.2.2.40.3
A physicalLinkUp trap is sent for devices that represent both a logical and physical device. The physicalLinkUp trap is sent when the physical device becomes active. The SNMP linkUp is sent when the logical device becomes active.
                     physicalLinkDown 1.3.6.1.4.1.10.2.2.40.4
A physicalLinkDown trap is sent for devices that represent both a logical and physical device. The physicalLinkDown trap is sent when the physical device becomes not active. The SNMP linkDown is sent when the logical device becomes not active.
                     fddiWrap 1.3.6.1.4.1.10.2.2.40.5
A FDDI wrap trap indicates that a FDDI ring is broken and the signal path wraps through a device and out the parallel fiber. The trap also occures when the wrapped condition is relieved.
                     vcpActive 1.3.6.1.4.1.10.2.2.40.6
This trap indicates that a VCP physical link just came up.
                     vcpInactive 1.3.6.1.4.1.10.2.2.40.7
This trap indicates that a VCP physical link just went down.
                     vcpReconfig 1.3.6.1.4.1.10.2.2.40.8
This trap indicates that a VCP physical link is reconfiguring.
                     vcpBroken 1.3.6.1.4.1.10.2.2.40.9
This trap indicates that a VCP physical link lost connection with its remote end.
                     vcpMisconfigured 1.3.6.1.4.1.10.2.2.40.10
This trap indicates that a VCP physical link has detected different configuration on the remote end.
                     decNetCircDownFault 1.3.6.1.4.1.10.2.2.40.407
This trap shows that a fault has brought down the indicated DECnet circuit.
                     decNetCircDown 1.3.6.1.4.1.10.2.2.40.408
This trap indicates that the named DECnet circuit is down. (This trap is not supported.)
                     decNetCircUp 1.3.6.1.4.1.10.2.2.40.410
This trap indicates that a DECnet circuit has become enabled.
                     decNetNodeReachChg 1.3.6.1.4.1.10.2.2.40.414
This trap reports a change in the nodes that can be reached. (This trap is not supported.)
                     decNetAdjUp 1.3.6.1.4.1.10.2.2.40.415
This trap indicates that a DECnet adjacent node just has come up.
                     decNetAdjRejected 1.3.6.1.4.1.10.2.2.40.416
This trap indicates that an adjacent node has been rejected of communication, or become inactive. The reason could be either the numbers of broadcast (non)routers or the address of a node exceeds the ones in the router's configuartion.
                     decNetAreaReachChg 1.3.6.1.4.1.10.2.2.40.417
This trap reports a change in the areas that can be reached. (This trap is not supported.)
                     decNetAdjDown 1.3.6.1.4.1.10.2.2.40.418
This trap indicates that a adjacent node has come down or lost.
                     decNetDesignatedRouter 1.3.6.1.4.1.10.2.2.40.422
This trap reports a change in the designated router.