NSCRTV-EPON-SYSTEM-MIB: View SNMP OID List / Download MIB

VENDOR: NATIONAL STANDARDIZATION COMMITTEE OF RADIO AND TV


 Home MIB: NSCRTV-EPON-SYSTEM-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC, NSCRTV-EPONEOC-EPON-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 systemGlobalObjects 1.3.6.1.4.1.17409.2.3.1.1
     systemTime 1.3.6.1.4.1.17409.2.3.1.1.1 dateandtime read-write
     inbandIpAddress 1.3.6.1.4.1.17409.2.3.1.1.2 ipaddress read-write
     inbandIpSubnetMask 1.3.6.1.4.1.17409.2.3.1.1.3 ipaddress read-write
     inbandIpGateway 1.3.6.1.4.1.17409.2.3.1.1.4 ipaddress read-write
     inbandVlanId 1.3.6.1.4.1.17409.2.3.1.1.5 integer read-write
     inbandMacAddress 1.3.6.1.4.1.17409.2.3.1.1.6 macaddress read-only
.
     outbandIpAddress 1.3.6.1.4.1.17409.2.3.1.1.7 ipaddress read-write
     outbandIpSubnetMask 1.3.6.1.4.1.17409.2.3.1.1.8 ipaddress read-write
     outbandIpGateway 1.3.6.1.4.1.17409.2.3.1.1.9 ipaddress read-write
     outbandMacAddress 1.3.6.1.4.1.17409.2.3.1.1.10 macaddress read-only
     systemOUI 1.3.6.1.4.1.17409.2.3.1.1.11 octet string read-only
     vendorName 1.3.6.1.4.1.17409.2.3.1.1.12 displaystring read-only
Vender name of the OLT equipment
     save 1.3.6.1.4.1.17409.2.3.1.1.13 integer read-write
save olt running-config
     clear 1.3.6.1.4.1.17409.2.3.1.1.14 integer read-write
clear olt running-config
 oltObjects 1.3.6.1.4.1.17409.2.3.1.2
     oltPropertyTable 1.3.6.1.4.1.17409.2.3.1.2.1 no-access
         oltPropertyEntry 1.3.6.1.4.1.17409.2.3.1.2.1.1 no-access
             oltDeviceIndex 1.3.6.1.4.1.17409.2.3.1.2.1.1.1 integer no-access
             oltName 1.3.6.1.4.1.17409.2.3.1.2.1.1.2 displaystring read-write
             oltType 1.3.6.1.4.1.17409.2.3.1.2.1.1.3 displaystring read-only
             oltAdminStatus 1.3.6.1.4.1.17409.2.3.1.2.1.1.4 integer read-write
Enumeration: 'down': 2, 'testing': 3, 'up': 1.
             oltDeviceUpTime 1.3.6.1.4.1.17409.2.3.1.2.1.1.5 timestamp read-only
             oltDeviceNumOfTotalServiceSlot 1.3.6.1.4.1.17409.2.3.1.2.1.1.6 integer read-only
Total number of service slots in the OLT device, including service card, switch card, control card, uplink card, etc. but except power, FAN, regardless whether the slot is installed module
             oltDeviceNumOfTotalPowerSlot 1.3.6.1.4.1.17409.2.3.1.2.1.1.7 integer read-only
Total number of power slots in the OLT device, regardless whether the slot is installed module
             oltDeviceNumOfTotalFanSlot 1.3.6.1.4.1.17409.2.3.1.2.1.1.8 integer read-only
Total number of FAN slots in the OLT device, regardless whether the slot is installed module
             oltDeviceStyle 1.3.6.1.4.1.17409.2.3.1.2.1.1.9 integer read-only
The device stype of either fixed or chassis based: fixed(1) - such as pizza box chassisBased(2) - Have number of slots for installing service card, power card, etc. Enumeration: 'chassisBased': 2, 'fixed': 1, 'other': 3.
 boardObjects 1.3.6.1.4.1.17409.2.3.1.3
     boardTable 1.3.6.1.4.1.17409.2.3.1.3.1 no-access
This table shall include rows for all slots, including the slots has a presence state of 'NotInstalled'.
         boardEntry 1.3.6.1.4.1.17409.2.3.1.3.1.1 no-access
             bDeviceIndex 1.3.6.1.4.1.17409.2.3.1.3.1.1.1 integer no-access
             bCardIndex 1.3.6.1.4.1.17409.2.3.1.3.1.1.2 eponcardindex no-access
             bType 1.3.6.1.4.1.17409.2.3.1.3.1.1.3 integer read-only
Enumeration: 'ponUplinkBoard': 8, 'controlBoard': 1, 'vacant': 6, 'controlUplinkBoard': 7, 'switchBoard': 4, 'other': 5, 'geponBoard': 2, 'uplinkBoard': 3.
             bAttribute 1.3.6.1.4.1.17409.2.3.1.3.1.1.4 integer read-only
Enumeration: 'active': 1, 'standby': 2, 'standalone': 3, 'notApplicable': 4.
             bOperationStatus 1.3.6.1.4.1.17409.2.3.1.3.1.1.5 integer read-only
Enumeration: 'down': 2, 'testing': 3, 'up': 1.
             bAdminStatus 1.3.6.1.4.1.17409.2.3.1.3.1.1.6 integer read-write
Enumeration: 'down': 2, 'testing': 3, 'up': 1.
             bHardwareVersion 1.3.6.1.4.1.17409.2.3.1.3.1.1.7 displaystring read-only
             bFirmwareVersion 1.3.6.1.4.1.17409.2.3.1.3.1.1.8 displaystring read-only
             bSoftwareVersion 1.3.6.1.4.1.17409.2.3.1.3.1.1.9 displaystring read-only
             bUpTime 1.3.6.1.4.1.17409.2.3.1.3.1.1.10 timestamp read-only
             bAlarmStatus 1.3.6.1.4.1.17409.2.3.1.3.1.1.11 bits read-only
Bits: 'major': 1, 'critical': 0, 'warning': 3, 'minor': 2.
             bSerialNumber 1.3.6.1.4.1.17409.2.3.1.3.1.1.12 displaystring read-only
             bAction 1.3.6.1.4.1.17409.2.3.1.3.1.1.13 integer read-write
Enumeration: 'switchover': 2, 'upgrade': 3, 'noAction': 1.
             bName 1.3.6.1.4.1.17409.2.3.1.3.1.1.14 octet string read-only
The board name defined by vendor individual
             bPresenceStatus 1.3.6.1.4.1.17409.2.3.1.3.1.1.15 integer read-only
The physical presence status of the slot Enumeration: 'installed': 1, 'notInstalled': 2, 'others': 3.
 powerObjects 1.3.6.1.4.1.17409.2.3.1.4
     powerPropertyTable 1.3.6.1.4.1.17409.2.3.1.4.1 no-access
         powerPropertyEntry 1.3.6.1.4.1.17409.2.3.1.4.1.1 no-access
             powerDeviceIndex 1.3.6.1.4.1.17409.2.3.1.4.1.1.1 integer no-access
             powerCardIndex 1.3.6.1.4.1.17409.2.3.1.4.1.1.2 eponcardindex no-access
             powerCardOperationStatus 1.3.6.1.4.1.17409.2.3.1.4.1.1.3 integer read-only
Enumeration: 'down': 2, 'testing': 3, 'up': 1.
             powerCardAlarmStatus 1.3.6.1.4.1.17409.2.3.1.4.1.1.4 bits read-only
Bits: 'major': 1, 'critical': 0, 'warning': 3, 'minor': 2.
             powerCardAction 1.3.6.1.4.1.17409.2.3.1.4.1.1.5 integer read-write
Switchover(2) shall be only set to the power board with powerCardRedundancyStatus of active(1) Enumeration: 'switchover': 2, 'noAction': 1.
             powerCardName 1.3.6.1.4.1.17409.2.3.1.4.1.1.6 octet string read-only
The power card name defined by vendor individual
             powerCardPresenceStatus 1.3.6.1.4.1.17409.2.3.1.4.1.1.7 integer read-only
The physical presence status of the power slot Enumeration: 'installed': 1, 'notInstalled': 2, 'others': 3.
             powerCardRedundancyStatus 1.3.6.1.4.1.17409.2.3.1.4.1.1.8 integer read-only
The redundancy status of the power card: active(1) - The power card is working on redundanct active/ Standby mode and the current role is active. stanby(2) - The power card is working on redundanct active/ Standby mode and the current role is standby. standalone(3) - The power card is not working on redundanct mode and the current role is standalone. loadShareing(4) - The power card is working on redundanct loadsharing mode. Enumeration: 'active': 1, 'standalone': 3, 'stanby': 2, 'loadShareing': 4.
 fanObjects 1.3.6.1.4.1.17409.2.3.1.5
     fanPropertyTable 1.3.6.1.4.1.17409.2.3.1.5.1 no-access
         fanPropertyEntry 1.3.6.1.4.1.17409.2.3.1.5.1.1 no-access
             fanDeviceIndex 1.3.6.1.4.1.17409.2.3.1.5.1.1.1 integer no-access
             fanCardIndex 1.3.6.1.4.1.17409.2.3.1.5.1.1.2 eponcardindex no-access
             fanCardOperationStatus 1.3.6.1.4.1.17409.2.3.1.5.1.1.3 integer read-only
Enumeration: 'down': 2, 'testing': 3, 'up': 1.
             fanCardAlarmStatus 1.3.6.1.4.1.17409.2.3.1.5.1.1.4 bits read-only
Bits: 'major': 1, 'critical': 0, 'warning': 3, 'minor': 2.
             fanCardName 1.3.6.1.4.1.17409.2.3.1.5.1.1.5 octet string read-only
The FAN card name defined by vendor individual
             fanCardPresenceStatus 1.3.6.1.4.1.17409.2.3.1.5.1.1.6 integer read-only
The physical presence status of the FAN card slot Enumeration: 'installed': 1, 'notInstalled': 2, 'others': 3.
 fileTransferManagement 1.3.6.1.4.1.17409.2.3.1.6
     fileTransferTable 1.3.6.1.4.1.17409.2.3.1.6.1 no-access
         fileTransferEntry 1.3.6.1.4.1.17409.2.3.1.6.1.1 no-access
             fileTransferIndex 1.3.6.1.4.1.17409.2.3.1.6.1.1.1 integer no-access
             fileTransferProtocolType 1.3.6.1.4.1.17409.2.3.1.6.1.1.2 integer read-write
Enumeration: 'ftp': 1, 'tftp': 2.
             serverIpAddress 1.3.6.1.4.1.17409.2.3.1.6.1.1.3 ipaddress read-write
             ftpUserName 1.3.6.1.4.1.17409.2.3.1.6.1.1.4 displaystring read-write
             ftpUserPassword 1.3.6.1.4.1.17409.2.3.1.6.1.1.5 displaystring read-write
             transferFileSrcNamePath 1.3.6.1.4.1.17409.2.3.1.6.1.1.6 displaystring read-write
             transferFileDstNamePath 1.3.6.1.4.1.17409.2.3.1.6.1.1.7 displaystring read-write
             transferAction 1.3.6.1.4.1.17409.2.3.1.6.1.1.8 integer read-write
Enumeration: 'put': 2, 'noOperation': 1, 'halt': 4, 'get': 3.
             transferStatus 1.3.6.1.4.1.17409.2.3.1.6.1.1.9 integer read-only
Enumeration: 'failure': 4, 'idle': 1, 'inProgress': 2, 'success': 3.
     fileInfoManagementTable 1.3.6.1.4.1.17409.2.3.1.6.2 no-access
It is done by file list per directionary. Please walk filePath for the file lists in the specified path. If leave it NULL or walk fileInfoManagementEntry, the file list of the root directionary shall be returned
         fileInfoManagementEntry 1.3.6.1.4.1.17409.2.3.1.6.2.1 no-access
             filePath 1.3.6.1.4.1.17409.2.3.1.6.2.1.1 displaystring no-access
File path It shall be started with a length octet, followed with path string. The length octet shall indicate the number of character octets, excluding length itself. For example, 0x05 41 42 43 44 45, respresents ABCDE It shall be ended with '/', which is used to distinguish the two DisplayString indexes. For example, if the path is flash/root, filePath shall be set to flash/root/.
             fileName 1.3.6.1.4.1.17409.2.3.1.6.2.1.2 displaystring no-access
File name. MUST not include '/' character and MUST not be NULL. It shall be started with a length octet, followed with name string. The length octet shall indicate the number of character octets, excluding length itself. For example, 0x05 41 42 43 44 45, respresents ABCDE
             fileSize 1.3.6.1.4.1.17409.2.3.1.6.2.1.3 counter32 read-only
             fileModifyTime 1.3.6.1.4.1.17409.2.3.1.6.2.1.4 dateandtime read-only
             fileManagementAction 1.3.6.1.4.1.17409.2.3.1.6.2.1.5 integer read-write
Enumeration: 'erase': 2, 'noOperation': 1.
             fileAttribute 1.3.6.1.4.1.17409.2.3.1.6.2.1.6 integer read-only
The attribute of the file Enumeration: 'file': 1, 'dir': 2.
 onuUpgradeManagement 1.3.6.1.4.1.17409.2.3.1.7
     onuBatchUpgradeObjects 1.3.6.1.4.1.17409.2.3.1.7.1
         onuBatchUpgradeOnuList 1.3.6.1.4.1.17409.2.3.1.7.1.1 octet string read-write
         onuBatchUpgradeAction 1.3.6.1.4.1.17409.2.3.1.7.1.2 integer read-write
         onuBatchUpgradeStatus 1.3.6.1.4.1.17409.2.3.1.7.1.3 octet string read-only