NOVELSAT-DEMODULATOR-MIB: View SNMP OID List / Download MIB

VENDOR: NOVELSAT


 Home MIB: NOVELSAT-DEMODULATOR-MIB
Download as:   
SNMPv2-CONF, IF-MIB, SNMPv2-SMI, NOVELSAT-ROOT-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 nsDemodulator 1.3.6.1.4.1.37576.4
Novelsat MIB branch for DeModulator products
     nsDemodConfig 1.3.6.1.4.1.37576.4.1
Demodulator MIB branch that holds all Demodulator configuration parameters.
         nsDemodConfigLine 1.3.6.1.4.1.37576.4.1.1
Demodulator MIB branch that holds all Demodulator line parameters.
             nsDemodConfigLineMode 1.3.6.1.4.1.37576.4.1.1.1 integer read-write
This parameter holds Line mode. Enumeration: 'dvbs2': 2, 'notApplicable': 255, 'dsng': 1, 'ns3': 3, 'dvbs': 0.
             nsDemodConfigLineRFFreq 1.3.6.1.4.1.37576.4.1.1.2 unsigned32 read-write
This parameter holds Line RF frequency in 10Hrz.
             nsDemodConfigLineRollOff 1.3.6.1.4.1.37576.4.1.1.3 integer read-write
This parameter holds Line roll off. rollOff005 = 0.05 rollOff010 = 0.10 rollOff015 = 0.15 rollOff020 = 0.20 rollOff025 = 0.25 rollOff035 = 0.35 Enumeration: 'rollOff010': 1, 'notApplicable': 255, 'rollOff035': 5, 'rollOff025': 4, 'rollOff020': 3, 'rollOff005': 0, 'rollOff015': 2.
             nsDemodConfigLineSymbolRate 1.3.6.1.4.1.37576.4.1.1.4 integer32 read-write
This parameter holds Line symbol rate in SPS.
             nsDemodConfigLineLNBControl 1.3.6.1.4.1.37576.4.1.1.5 integer read-write
This parameter holds Line LNB control. Enumeration: 'lnbOff': 0, 'lnb13v0khz': 1, 'lnb18v22khz': 4, 'lnb13v22khz': 2, 'notApplicable': 255, 'lnb18v0khz': 3.
             nsDemodConfigLineDualChState 1.3.6.1.4.1.37576.4.1.1.6 integer read-write
This parameter holds Line dual channel status: dual/single channel. Enumeration: 'notApplicable': 255, 'single': 1, 'dual': 0.
             nsDemodConfigLineNoneLinearMode 1.3.6.1.4.1.37576.4.1.1.7 integer read-write
This parameter holds Line none linear mode: off/on. Enumeration: 'on': 1, 'off': 0, 'notApplicable': 255.
             nsDemodConfigLineAcmMode 1.3.6.1.4.1.37576.4.1.1.8 integer read-write
This parameter holds Line ACM mode: enable/disable. Enumeration: 'notApplicable': 255, 'enableCh1Ch2': 3, 'disable': 0, 'enableCh1': 1, 'enableCh2': 2.
             nsDemodConfigLineAcmServerAddress 1.3.6.1.4.1.37576.4.1.1.9 ipaddress read-write
This parameter holds Line ACM server address.
             nsDemodConfigLineAcmMargin 1.3.6.1.4.1.37576.4.1.1.10 integer32 read-write
This parameter is no longer supported
             nsDemodConfigLineGoldSeq 1.3.6.1.4.1.37576.4.1.1.11 integer32 read-write
This parameter holds Line golden sequence.
             nsDemodConfigLineAutoCcmMode 1.3.6.1.4.1.37576.4.1.1.12 integer read-write
This parameter holds Line Auto CCM mode: enable/disable. Enumeration: 'notApplicable': 255, 'enable': 1, 'disable': 0.
             nsDemodConfigLineLOFreq 1.3.6.1.4.1.37576.4.1.1.13 unsigned32 read-write
This parameter holds Line LO frequency in 10Hrz.
             nsDemodConfigLineInputLevelMode 1.3.6.1.4.1.37576.4.1.1.14 integer read-write
This parameter holds Line input level mode: constant power/constant envelope. Enumeration: 'constantEnvelope': 1, 'notApplicable': 255, 'constantPower': 0.
             nsDemodConfigLineAcmUseManagementIp 1.3.6.1.4.1.37576.4.1.1.15 integer read-write
This parameter is no longer supported Enumeration: 'notApplicable': 255, 'enable': 1, 'disable': 0.
             nsDemodConfigLineAcmIpAddress 1.3.6.1.4.1.37576.4.1.1.16 ipaddress read-write
This parameter is no longer supported
             nsDemodConfigLineAcmIpNetmask 1.3.6.1.4.1.37576.4.1.1.17 ipaddress read-write
This parameter is no longer supported
             nsDemodConfigLineAcmIpNextHopIp 1.3.6.1.4.1.37576.4.1.1.18 ipaddress read-write
This parameter is no longer supported
             nsDemodConfigLineAcmMarginCh1 1.3.6.1.4.1.37576.4.1.1.19 integer32 read-write
This parameter holds Line ACM margin for channel 2 in hundreds of dB.
             nsDemodConfigLineAcmMarginCh2 1.3.6.1.4.1.37576.4.1.1.20 integer32 read-write
This parameter holds Line ACM margin for channel 2 in hundreds of dB.
             nsDemodConfigLineEchoCancellationMode 1.3.6.1.4.1.37576.4.1.1.21 integer read-write
This parameter holds Line echo cancellation mode. Enumeration: 'rx-hub-enable': 3, 'enable': 1, 'tx-hub-enable': 2, 'disable': 0, 'notApplicable': 255.
             nsDemodConfigLineEchoCancellationMinDelay 1.3.6.1.4.1.37576.4.1.1.22 unsigned32 read-write
This parameter holds Line echo cancellation min delay in mSec.
             nsDemodConfigLineEchoCancellationMaxDelay 1.3.6.1.4.1.37576.4.1.1.23 unsigned32 read-write
This parameter holds Line echo cancellation max delay in mSec.
             nsDemodConfigLineEchoCancellationTxFreqOffset 1.3.6.1.4.1.37576.4.1.1.24 integer32 read-write
This parameter holds Line echo cancellation TX frequency offset in Hz.
             nsDemodConfigLineAdvancedAcmMode 1.3.6.1.4.1.37576.4.1.1.25 integer read-write
This parameter holds Line Advanced ACM: enable/disable. Enumeration: 'notApplicable': 255, 'enable': 1, 'disable': 0.
         nsDemodConfigChannel 1.3.6.1.4.1.37576.4.1.2
Demodulator MIB branch that holds all Demodulator channel parameters.
             nsDemodConfigChannelTable 1.3.6.1.4.1.37576.4.1.2.1 no-access
A list of Channel parameters
                 nsDemodConfigChannelEntry 1.3.6.1.4.1.37576.4.1.2.1.1 no-access
Conceptual row in table for each channel.
                     nsDemodConfigChIsiFrom 1.3.6.1.4.1.37576.4.1.2.1.1.1 integer32 read-write
This parameter holds channel ISI start range.
                     nsDemodConfigChIsiTo 1.3.6.1.4.1.37576.4.1.2.1.1.2 integer32 read-write
This parameter holds channel ISI end range.
         nsDemodConfigInterface 1.3.6.1.4.1.37576.4.1.3
Demodulator MIB branch that holds all Demodulator Interface parameters.
             nsDemodConfigInterfaceTestTable 1.3.6.1.4.1.37576.4.1.3.1 no-access
A list of Test interfaces
                 nsDemodConfigInterfaceTestEntry 1.3.6.1.4.1.37576.4.1.3.1.1 no-access
Conceptual row in table for each test interface.
                     nsDemodConfigInterfaceTestSource 1.3.6.1.4.1.37576.4.1.3.1.1.1 integer read-write
This parameter holds Test interface source. Enumeration: 'channel2': 2, 'channel1': 1, 'disable': 0, 'notApplicable': 255.
                     nsDemodConfigInterfaceTestPattern 1.3.6.1.4.1.37576.4.1.3.1.1.2 integer read-write
This parameter holds Test interface pattern. pattern2Pwr07Neg1 = 2^07-1 pattern2Pwr09Neg1 = 2^09-1 pattern2Pwr11Neg1 = 2^11-1 pattern2Pwr15Neg1 = 2^15-1 pattern2Pwr20Neg1 = 2^20-1 pattern2Pwr23Neg1 = 2^23-1 pattern2Pwr29Neg1 = 2^29-1 pattern2Pwr31Neg1 = 2^31-1 patternAllZeros = all zeros patternAllOnes = all ones patternBitAlternate = bit alternate pattern2BitAlternate= 2 bit alternate pattern7Ones = 1111111 (7 ones) pattern7Zeros = 0000000 (7 zeros) pattern6Ones = 111111 (6 ones) pattern6Zeros = 000000 (6 zeros) pattern55AA = 0x55AA pattern6699 = 0x6699 patternC33C = 0xC33C pattern00FF = 0x00FF patternSAWTOOTH = SAWTOOTH Enumeration: 'pattern2Pwr29Neg1': 6, 'pattern6Ones': 14, 'notApplicable': 255, 'pattern2Pwr23Neg1': 5, 'pattern00FF': 19, 'pattern2Pwr7Neg1': 0, 'pattern7Ones': 12, 'patternAllOnes': 9, 'patternSAWTOOTH': 20, 'pattern55AA': 16, 'pattern2Pwr15Neg1': 3, 'pattern7Zeros': 13, 'pattern6Zeros': 15, 'pattern6699': 17, 'pattern2Pwr20Neg1': 4, 'pattern2Pwr11Neg1': 2, 'patternC33C': 18, 'pattern2Pwr31Neg1': 7, 'patternAllZeros': 8, 'pattern2BitAlternate': 11, 'pattern2Pwr9Neg1': 1, 'patternBitAlternate': 10.
                     nsDemodConfigInterfaceTestInvert 1.3.6.1.4.1.37576.4.1.3.1.1.3 integer read-write
This parameter holds Test interface invert. Enumeration: 'notApplicable': 255, 'yes': 1, 'no': 0.
                     nsDemodConfigInterfaceTestIgnoreBytes 1.3.6.1.4.1.37576.4.1.3.1.1.4 integer32 read-write
This parameter holds Test interface ignore bytes.
             nsDemodConfigInterfaceASITable 1.3.6.1.4.1.37576.4.1.3.2 no-access
A list of ASI interfaces
                 nsDemodConfigInterfaceASIEntry 1.3.6.1.4.1.37576.4.1.3.2.1 no-access
Conceptual row in table for each ASI interface.
                     nsDemodConfigInterfaceASISource 1.3.6.1.4.1.37576.4.1.3.2.1.1 integer read-write
This parameter holds ASI interface source. Enumeration: 'channel2': 2, 'channel1': 1, 'disable': 0, 'notApplicable': 255.
                     nsDemodConfigInterfaceASIDataInvert 1.3.6.1.4.1.37576.4.1.3.2.1.2 integer read-write
This parameter holds ASI interface data invert. Enumeration: 'notApplicable': 255, 'yes': 1, 'no': 0.
                     nsDemodConfigInterfaceASIDataRateMode 1.3.6.1.4.1.37576.4.1.3.2.1.3 integer read-write
This parameter holds ASI interface data rate mode: automatic/manual. Enumeration: 'auto': 0, 'manual': 1, 'notApplicable': 255.
                     nsDemodConfigInterfaceASIDataRate 1.3.6.1.4.1.37576.4.1.3.2.1.4 integer32 read-write
This parameter holds ASI interface data rate in bPS.
                     nsDemodConfigInterfaceASIDataRateAccuracy 1.3.6.1.4.1.37576.4.1.3.2.1.5 integer32 read-write
This parameter holds ASI interface data rate accuracy in hundreds of ppm.
             nsDemodConfigInterfaceEthernetTable 1.3.6.1.4.1.37576.4.1.3.4 no-access
A list of Ethernet interfaces
                 nsDemodConfigInterfaceEthernetEntry 1.3.6.1.4.1.37576.4.1.3.4.1 no-access
Conceptual row in table for each Ethernet interface.
                     nsDemodConfigInterfaceEthernetSource 1.3.6.1.4.1.37576.4.1.3.4.1.1 integer read-write
This parameter holds Ethernet interface source Enumeration: 'channel-2': 2, 'channel-1': 1, 'disable': 0, 'notApplicable': 255.
                     nsDemodConfigInterfaceEthernetAutoNegotiation 1.3.6.1.4.1.37576.4.1.3.4.1.2 integer read-write
This parameter holds Ethernet interface auto-negotiation status Enumeration: 'notApplicable': 255, 'enable': 1, 'disable': 0.
                     nsDemodConfigInterfaceEthernetSpeed 1.3.6.1.4.1.37576.4.1.3.4.1.3 integer read-write
This parameter holds Ethernet interface speed Enumeration: 'speed10': 0, 'speed100': 1, 'notApplicable': 255.
                     nsDemodConfigInterfaceEthernetDuplex 1.3.6.1.4.1.37576.4.1.3.4.1.4 integer read-write
This parameter holds Ethernet interface Duplex Enumeration: 'notApplicable': 255, 'full': 1, 'half': 0.
                     nsDemodConfigInterfaceEthernetEncapsulation 1.3.6.1.4.1.37576.4.1.3.4.1.5 integer read-write
This parameter holds Ethernet interface Encapsulation Enumeration: 'nspe': 1, 'raw': 0, 'ule': 3, 'gse': 2, 'notApplicable': 255.
                     nsDemodConfigInterfaceEthernetPid 1.3.6.1.4.1.37576.4.1.3.4.1.6 integer32 read-write
This parameter holds Ethernet interface PID value
             nsDemodConfigInterfaceGigETable 1.3.6.1.4.1.37576.4.1.3.5 no-access
A list of GigE interfaces
                 nsDemodConfigInterfaceGigEEntry 1.3.6.1.4.1.37576.4.1.3.5.1 no-access
Conceptual row in table for each gigE interface.
                     nsDemodConfigInterfaceGigEAutoNegotiation 1.3.6.1.4.1.37576.4.1.3.5.1.1 integer read-write
This parameter holds GigE interface auto-negotiation status Enumeration: 'notApplicable': 255, 'enable': 1, 'disable': 0.
                     nsDemodConfigInterfaceGigESpeed 1.3.6.1.4.1.37576.4.1.3.5.1.2 integer read-write
This parameter holds GigE interface speed Enumeration: 'speed10': 0, 'speed100': 1, 'notApplicable': 255.
                     nsDemodConfigInterfaceGigEDuplex 1.3.6.1.4.1.37576.4.1.3.5.1.3 integer read-write
This parameter holds GigE interface Duplex Enumeration: 'notApplicable': 255, 'full': 1, 'half': 0.
                     nsDemodConfigInterfaceGigEPortType 1.3.6.1.4.1.37576.4.1.3.5.1.5 integer read-write
This parameter holds GigE interface port type value Enumeration: 'rj45': 0, 'sfp': 1, 'notApplicable': 255.
         nsDemodConfigDiseqc 1.3.6.1.4.1.37576.4.1.4
Demodulator MIB branch that holds all Demodulator DiSEqC parameters.
             nsDemodConfigDiseqcTable 1.3.6.1.4.1.37576.4.1.4.1 no-access
A list of Diseqc parameters
                 nsDemodConfigDiseqcEntry 1.3.6.1.4.1.37576.4.1.4.1.1 no-access
Conceptual row in table for each DiSEqC.
                     nsDemodConfigDiseqcName 1.3.6.1.4.1.37576.4.1.4.1.1.1 displaystring no-access
This parameter holds DiSEqC command's name.
                     nsDemodConfigDiseqcHeaderBytes 1.3.6.1.4.1.37576.4.1.4.1.1.2 counter64 read-only
This parameter holds DiSEqC command's header bytes.
                     nsDemodConfigDiseqcNumDataBytes 1.3.6.1.4.1.37576.4.1.4.1.1.3 unsigned32 read-only
This parameter holds DiSEqC command's number of data bytes.
                     nsDemodConfigDiseqcToneBurstMode 1.3.6.1.4.1.37576.4.1.4.1.1.4 integer read-only
This parameter holds DiSEqC command's tone burst mode. Enumeration: 'auto': 0, 'modulated': 2, 'unmodulated': 1, 'none': 3, 'notApplicable': 255.
                     nsDemodConfigDiseqcNotifyRowStatus 1.3.6.1.4.1.37576.4.1.4.1.1.5 rowstatus read-only
Used to create new rows or delete in the table. Note that all rows are active(1) at all times, since default values are given to empty parameters. Value createAndGo(4) is used when all row parameters are inserted at once, while createAndWait(5) is used to create row with default values. Value destroy(6) is used to remove a row
             nsDemodConfigDiseqcExecuteCmd 1.3.6.1.4.1.37576.4.1.4.2
Demodulator MIB branch that holds parameters to execute DiSEqC command.
                 nsDemodConfigDiseqcExecuteCmdName 1.3.6.1.4.1.37576.4.1.4.2.1 displaystring read-write
This parameter holds DiSEqC command's name to execute.
                 nsDemodConfigDiseqcExecuteCmdData 1.3.6.1.4.1.37576.4.1.4.2.2 unsigned32 read-write
This parameter holds DiSEqC command's data for execution.
                 nsDemodConfigDiseqcExecuteCmdExecute 1.3.6.1.4.1.37576.4.1.4.2.3 integer read-write
This parameter holds allow to start DiSEqC command execution. Enumeration: 'notApplicable': 255, 'none': 0, 'run': 1.
     nsDemodMonitor 1.3.6.1.4.1.37576.4.2
Demodulator MIB branch that holds all Demodulator status and alarms.
         nsDemodMonitorLine 1.3.6.1.4.1.37576.4.2.1
Demodulator MIB branch that holds all Demodulator line statuses.
             nsDemodMonitorLineMode 1.3.6.1.4.1.37576.4.2.1.1 integer read-only
This parameter holds Line mode status. Enumeration: 'dvbs2': 2, 'notApplicable': 255, 'dsng': 1, 'ns3': 3, 'dvbs': 0.
             nsDemodMonitorLineState 1.3.6.1.4.1.37576.4.2.1.2 integer read-only
This parameter holds Line state status. Enumeration: 'no-sync': 0, 'notApplicable': 255, 'sync': 1.
             nsDemodMonitorLineSNR 1.3.6.1.4.1.37576.4.2.1.3 integer32 read-only
This parameter holds Line Pilot SNR status in hundreds of dB.
             nsDemodMonitorLineCompositePower 1.3.6.1.4.1.37576.4.2.1.4 integer32 read-only
This parameter holds Line Composite power status in hundreds of dBm.
             nsDemodMonitorLineSymbolRate 1.3.6.1.4.1.37576.4.2.1.5 integer32 read-only
This parameter holds Symbol rate status in SPS.
             nsDemodMonitorLineRollOff 1.3.6.1.4.1.37576.4.2.1.6 integer read-only
This parameter holds Line roll off. rollOff005 = 0.05 rollOff010 = 0.10 rollOff015 = 0.15 rollOff020 = 0.20 rollOff025 = 0.25 rollOff035 = 0.35 Enumeration: 'rollOff010': 1, 'notApplicable': 255, 'rollOff035': 5, 'rollOff025': 4, 'rollOff020': 3, 'rollOff005': 0, 'rollOff015': 2.
             nsDemodMonitorLineRFFreq 1.3.6.1.4.1.37576.4.2.1.7 unsigned32 read-only
This parameter holds Line RF frequency status in 10Hz.
             nsDemodMonitorLineDataRateCh1 1.3.6.1.4.1.37576.4.2.1.8 integer32 read-only
This parameter holds Line Data rate channel 1 status in bit/sec.
             nsDemodMonitorLineDataRateCh2 1.3.6.1.4.1.37576.4.2.1.9 integer32 read-only
This parameter holds Line Data rate channel 2 status in bit/sec.
             nsDemodMonitorLinePrbsDataBytes 1.3.6.1.4.1.37576.4.2.1.10 integer32 read-only
This parameter holds PRBS Data Rate.
             nsDemodMonitorLinePrbsErrorBits 1.3.6.1.4.1.37576.4.2.1.11 integer32 read-only
This parameter holds PRBS Error bits.
             nsDemodMonitorLinePrbsErrorBitsRate 1.3.6.1.4.1.37576.4.2.1.12 displaystring read-only
This parameter holds PRBS Error bits rate.
             nsDemodMonitorLineFERFrames 1.3.6.1.4.1.37576.4.2.1.13 integer32 read-only
This parameter holds FER frames.
             nsDemodMonitorLineFERErrorFrames 1.3.6.1.4.1.37576.4.2.1.14 integer32 read-only
This parameter holds FER error frames.
             nsDemodMonitorLineFERErrorFramesRate 1.3.6.1.4.1.37576.4.2.1.15 displaystring read-only
This parameter holds FER error frames rate.
             nsDemodMonitorModeCodeTable 1.3.6.1.4.1.37576.4.2.1.16 no-access
A list of Mode code status fields
                   nsDemodMonitorModeCodeEntry 1.3.6.1.4.1.37576.4.2.1.16.1 no-access
Conceptual row in table for each mode code option.
                       nsDemodMonitorModeCodeModulation 1.3.6.1.4.1.37576.4.2.1.16.1.1 integer no-access
This parameter holds mode code modulation. Enumeration: 'modulationQpsk': 1, 'modulation8Psk': 2, 'modulation32Apsk': 5, 'modulation16Qam': 3, 'modulation16Apsk': 4, 'modulationBpsk': 0, 'notApplicable': 255, 'modulation64Apsk': 6.
                       nsDemodMonitorModeCodeFEC 1.3.6.1.4.1.37576.4.2.1.16.1.2 integer no-access
This parameter holds channel FEC rate. fec1Div5 = 1/5 fec1Div4 = 1/4 fec1Div4Short = 1/4 DVBS2 SHORT FRAME fec1Div3 = 1/3 fec2Div5 = 2/5 fec13Div30 = 13/30 fec4Div9 = 4/9 fec7Div15 = 7/15 fec22Div45 = 22/45 fec1Div2 = 1/2 fec1Div2Short = 1/2 DVBS2 SHORT FRAME fec8Div15 = 8/15 fec5Div9 = 5/9 fec17Div30 = 17/30 fec3Div5 = 3/5 fec28Div45 = 28/45 fec19Div30 = 19/30 fec2Div3 = 2/3 fec32Div45 = 32/45 fec11Div15 = 11/15 fec3Div4 = 3/4 fec3Div4Short = 3/4 DVBS2 SHORT FRAME fec7Div9 = 7/9 fec4Div5 = 4/5 fec4Div5Short = 4/5 DVBS2 SHORT FRAME fec37Div45 = 37/45 fec5Div6 = 5/6 fec5Div6Short = 5/6 DVBS2 SHORT FRAME fec7Div8 = 7/8 fec8Div9 = 8/9 fec9Div10 = 9/10 Enumeration: 'fec19Div30': 16, 'fec13Div30': 5, 'fec28Div45': 15, 'notApplicable': 255, 'fec8Div15': 11, 'fec32Div45': 18, 'fec11Div15': 19, 'fec37Div45': 25, 'fec22Div45': 8, 'fec9Div10': 30, 'fec2Div3': 17, 'fec2Div5': 4, 'fec8Div9': 29, 'fec3Div4': 20, 'fec3Div5': 14, 'fec17Div30': 13, 'fec5Div6Short': 27, 'fec7Div15': 7, 'fec3Div4Short': 21, 'fec4Div9': 6, 'fec5Div6': 26, 'fec4Div5': 23, 'fec5Div9': 12, 'fec4Div5Short': 24, 'fec7Div8': 28, 'fec7Div9': 22, 'fec1Div4': 1, 'fec1Div5': 0, 'fec1Div4Short': 2, 'fec1Div2': 9, 'fec1Div3': 3, 'fec1Div2Short': 10.
                       nsDemodMonitorModeCodePilot 1.3.6.1.4.1.37576.4.2.1.16.1.3 integer no-access
This parameter holds mode code pilot. Enumeration: 'pilotNo': 0, 'notApplicable': 255, 'pilot16Slots': 1, 'pilot8Slots': 2.
                       nsDemodMonitorModeCodeFrameSize 1.3.6.1.4.1.37576.4.2.1.16.1.4 integer no-access
This parameter holds mode code pilot. Enumeration: 'notApplicable': 255, 'short': 1, 'normal': 0.
                       nsDemodMonitorModeCodeFrames 1.3.6.1.4.1.37576.4.2.1.16.1.5 integer32 read-only
This parameter holds mode code pilot.
                       nsDemodMonitorModeCodeFramesErr 1.3.6.1.4.1.37576.4.2.1.16.1.6 integer32 read-only
This parameter holds mode code pilot.
                       nsDemodMonitorModeCodeFramesErrRate 1.3.6.1.4.1.37576.4.2.1.16.1.7 displaystring read-only
This parameter holds mode code FER.
                       nsDemodMonitorModeCodeFramesLinkMargin 1.3.6.1.4.1.37576.4.2.1.16.1.8 displaystring read-only
This parameter holds mode code Link Margin.
                       nsDemodMonitorModeCodeFramesSnr 1.3.6.1.4.1.37576.4.2.1.16.1.9 displaystring read-only
This parameter holds mode code Snr.
                       nsDemodMonitorModeCodeFramesDesignatedToUnit 1.3.6.1.4.1.37576.4.2.1.16.1.10 displaystring read-only
This parameter holds the information whether the mode code was sent to this remote or not
             nsDemodMonitorLineLinkMargin 1.3.6.1.4.1.37576.4.2.1.17 integer32 read-only
This parameter holds Line Link Margin in hundreds of dB.
             nsDemodMonitorLineSymbolRateOffset 1.3.6.1.4.1.37576.4.2.1.18 integer32 read-only
This parameter holds Line Symbol-rate offset status in thousands of PPM.
             nsDemodMonitorLineFrequencyOffset 1.3.6.1.4.1.37576.4.2.1.19 integer32 read-only
This parameter holds Line frequency offset status in Hz.
             nsDemodMonitorLinePrbsSource 1.3.6.1.4.1.37576.4.2.1.20 integer read-only
This parameter holds PRBS source. Enumeration: 'channel2': 2, 'channel1': 1, 'disable': 0, 'notApplicable': 255.
             nsDemodMonitorLineChannelTable 1.3.6.1.4.1.37576.4.2.1.21 no-access
A list of Channel specific status fields
                   nsDemodMonitorChannelEntry 1.3.6.1.4.1.37576.4.2.1.21.1 no-access
Conceptual row in table for each channel option.
                       nsDemodMonitorLineChannelDataRate 1.3.6.1.4.1.37576.4.2.1.21.1.1 integer32 read-only
This parameter holds Channel Data rate status in bit/sec.
                       nsDemodMonitorLineChannelLinkMargin 1.3.6.1.4.1.37576.4.2.1.21.1.2 integer32 read-only
This parameter holds Line Link Margin in hundreds of dB.
                       nsDemodMonitorLineChannelLockStatus 1.3.6.1.4.1.37576.4.2.1.21.1.3 integer read-only
This parameter holds Channel lock status. Enumeration: 'notApplicable': 255, 'locked': 1, 'unlocked': 0.
                       nsDemodMonitorLineChannelSNR 1.3.6.1.4.1.37576.4.2.1.21.1.4 integer32 read-only
This parameter holds Line Data SNR status in hundreds of dB.
                       nsDemodMonitorLineChannelModulation 1.3.6.1.4.1.37576.4.2.1.21.1.5 integer read-only
This parameter holds mode code modulation. Enumeration: 'modulationQpsk': 1, 'modulation8Psk': 2, 'modulation32Apsk': 5, 'modulation16Qam': 3, 'modulation16Apsk': 4, 'modulationBpsk': 0, 'notApplicable': 255, 'modulation64Apsk': 6.
                       nsDemodMonitorLineChannelFEC 1.3.6.1.4.1.37576.4.2.1.21.1.6 integer read-only
This parameter holds channel FEC rate. fec1Div5 = 1/5 fec1Div4 = 1/4 fec1Div3 = 1/3 fec2Div5 = 2/5 fec13Div30 = 13/30 fec4Div9 = 4/9 fec7Div15 = 7/15 fec22Div45 = 22/45 fec1Div2 = 1/2 fec8Div15 = 8/15 fec5Div9 = 5/9 fec17Div30 = 17/30 fec3Div5 = 3/5 fec28Div45 = 28/45 fec19Div30 = 19/30 fec2Div3 = 2/3 fec32Div45 = 32/45 fec11Div15 = 11/15 fec3Div4 = 3/4 fec7Div9 = 7/9 fec4Div5 = 4/5 fec37Div45 = 37/45 fec5Div6 = 5/6 fec7Div8 = 7/8 fec8Div9 = 8/9 fec9Div10 = 9/10 Enumeration: 'fec19Div30': 14, 'fec13Div30': 4, 'fec28Div45': 13, 'notApplicable': 255, 'fec8Div15': 9, 'fec5Div9': 10, 'fec11Div15': 17, 'fec37Div45': 21, 'fec22Div45': 7, 'fec9Div10': 25, 'fec2Div3': 15, 'fec2Div5': 3, 'fec8Div9': 24, 'fec3Div4': 18, 'fec3Div5': 12, 'fec17Div30': 11, 'fec7Div15': 6, 'fec4Div9': 5, 'fec5Div6': 22, 'fec4Div5': 20, 'fec32Div45': 16, 'fec7Div8': 23, 'fec7Div9': 19, 'fec1Div4': 1, 'fec1Div5': 0, 'fec1Div2': 8, 'fec1Div3': 2.
                       nsDemodMonitorLineChannelPilot 1.3.6.1.4.1.37576.4.2.1.21.1.7 integer read-only
This parameter holds mode code pilot. Enumeration: 'pilotNo': 0, 'notApplicable': 255, 'pilot16Slots': 1, 'pilot8Slots': 2.
                       nsDemodMonitorLineChannelFrameSize 1.3.6.1.4.1.37576.4.2.1.21.1.8 integer read-only
This parameter holds mode code pilot. Enumeration: 'notApplicable': 255, 'short': 1, 'normal': 0.
                       nsDemodMonitorLineChannelFrames 1.3.6.1.4.1.37576.4.2.1.21.1.9 integer32 read-only
This parameter holds mode code pilot.
                       nsDemodMonitorLineChannelFramesErr 1.3.6.1.4.1.37576.4.2.1.21.1.10 integer32 read-only
This parameter holds mode code pilot.
                       nsDemodMonitorLineChannelFramesErrRate 1.3.6.1.4.1.37576.4.2.1.21.1.11 displaystring read-only
This parameter holds mode code FER.
             nsDemodMonitorLineSignalPower 1.3.6.1.4.1.37576.4.2.1.22 integer32 read-only
This parameter holds Line Signal Power status in hundreds of dBm.
             nsDemodMonitorLineCntrClrCmd 1.3.6.1.4.1.37576.4.2.1.23 integer read-write
Clear Line counters command Enumeration: 'notApplicable': 255, 'none': 0, 'execute': 1.
             nsDemodMonitorLineEcState 1.3.6.1.4.1.37576.4.2.1.24 integer read-only
This parameter holds Echo Cancellation State. Enumeration: 'lock': 1, 'unlock': 0.
             nsDemodMonitorLineEcSatDelay 1.3.6.1.4.1.37576.4.2.1.25 unsigned32 read-only
This parameter holds Echo Cancellation satellite delay in ms.
             nsDemodMonitorLineEcTxFreqOffset 1.3.6.1.4.1.37576.4.2.1.26 integer32 read-only
This parameter holds Echo Cancellation TX frequency offset in Hz.
             nsDemodMonitorLineEcGainDiff 1.3.6.1.4.1.37576.4.2.1.27 integer32 read-only
This parameter holds Echo Cancellation Gain Difference in hundreds of dBm.
         nsDemodMonitorInterface 1.3.6.1.4.1.37576.4.2.2
Demodulator MIB branch that holds all Demodulator interface statuses.
             nsDemodMonitorInterfaceTable 1.3.6.1.4.1.37576.4.2.2.1 no-access
A list of interface statuses
                 nsDemodMonitorInterfaceEntry 1.3.6.1.4.1.37576.4.2.2.1.1 no-access
Conceptual row in table for each interface.
                     nsDemodMonitorInterfaceName 1.3.6.1.4.1.37576.4.2.2.1.1.1 displaystring read-only
Name of interface
                     nsDemodMonitorInterfaceSource 1.3.6.1.4.1.37576.4.2.2.1.1.2 displaystring read-only
Source of interface
                     nsDemodMonitorInterfaceRate 1.3.6.1.4.1.37576.4.2.2.1.1.3 displaystring read-only
This parameter holds interface source rate.
         nsDemodMonitorSystem 1.3.6.1.4.1.37576.4.2.3
Demodulator MIB branch that holds all Demodulator system statuses.
             nsDemodMonitorSystemFPGATmp 1.3.6.1.4.1.37576.4.2.3.1 integer32 read-only
This parameter holds system FPGA temperature status in hundreds of Celsius degrees.
             nsDemodMonitorSystemBoardTmp 1.3.6.1.4.1.37576.4.2.3.2 integer32 read-only
This parameter holds system board temperature status in hundreds of Celsius degrees.
             nsDemodMonitorSystem10MHrzClkSource 1.3.6.1.4.1.37576.4.2.3.3 integer read-only
This parameter holds system 10MHrz clock source. Enumeration: 'internal': 0, 'external': 1.
             nsDemodMonitorSystemRefClkOut 1.3.6.1.4.1.37576.4.2.3.4 integer read-only
This parameter holds system ref clock out. Enumeration: 'on': 1, 'off': 0, 'notApplicable': 255.
             nsDemodMonitorSystemLnbRefClk 1.3.6.1.4.1.37576.4.2.3.5 integer read-only
This parameter holds system LNB ref clock. Enumeration: 'on': 1, 'off': 0, 'notApplicable': 255.
         nsDemodMonitorEthernet 1.3.6.1.4.1.37576.4.2.4
Common MIB branch that holds all Ethernet statistics.
             nsDemodMonitorEthernetTable 1.3.6.1.4.1.37576.4.2.4.1 no-access
List of Ethernet Statistics
                 nsDemodMonitorEthernetEntry 1.3.6.1.4.1.37576.4.2.4.1.1 no-access
Conceptual row in table for each event.
                     nsDemodMonitorEthernetStatisticsNumber 1.3.6.1.4.1.37576.4.2.4.1.1.1 counter32 no-access
Ethernet Statistics Number
                     nsDemodMonitorEthernetStatisticsName 1.3.6.1.4.1.37576.4.2.4.1.1.2 displaystring read-only
Name of Ethernet Statistics
                     nsDemodMonitorEthernetStatisticsValueA 1.3.6.1.4.1.37576.4.2.4.1.1.3 integer32 read-only
Value of Ethernet Statistics
                     nsDemodMonitorEthernetStatisticsValueB 1.3.6.1.4.1.37576.4.2.4.1.1.4 integer32 read-only
Value of Ethernet Statistics