NNC-EXT-PM-STATISTICS-MIB: View SNMP OID List / Download MIB

VENDOR: NEWBRIDGE NETWORKS CORPORATION


 Home MIB: NNC-EXT-PM-STATISTICS-MIB
Download as:   

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 nncExtPmStatistics 1.3.6.1.4.1.123.3.65
This module contains the definitions for statistics collected for OAM Performance Monitoring. The definition and requirement for these statistics are found in GR-1248-CORE. In addition, Cell Loss Ratio has been added as part of the Newbridge extension. This MIB module contains the following tables: OAM PM 15 Minute Current Table OAM PM 15 Minute Interval Table OAM PM 24 Hour Current Table OAM PM 24 Hour Interval Table These tables are heavily influenced by the definition of VPL/VCL described in rfc1695. The number of intervals supported is dependent upon resource availibility on any given product, but should nominally be 32 for 15 Minute intervals and 2 for 24 Hour intervals. To avoid building in massive amounts of storage, some products may adopt a bulk collection scheme. Intervals: Statistics on the performance of VPL/VCLs are collected over a historical stratum of up to a maximum of M intervals. The value of M is a function of a product's storage capability. For example, on the 36170 product, M = 32 for 15 Minute interval. The 15 Minute intervals are aligned to the quarter of one hour of a wall clock. The current interval spans back to the last 15 minute tick on the wall clock. Continuing along the timeline from that point is the most recently completed interval and has an index of 1. The previous interval has an index of 2 and so on. Note that the oldest interval may be incomplete since the statistic collection may have been enabled offset to the quarter or one hour tick. t 0 -1i -2i -3i ===========|===========|===========|===========|=========== current N = 1 N = 2 N = 3 N = 4 ... N = M interval Performance Monitoring Demarcation Values: As defined in GR-1248-CORE, three demarcation values are defined to evaluate the condition of a PM cell block. These are M errored, M lost and M misinserted. These values are configurable on a system-wide basis. Where applicable, the definition of a statistics object in this module will refer to one or more of these values.
       nncExtPmStatisticsObjects 1.3.6.1.4.1.123.3.65.1
           nncExtPm15MinCurrentTable 1.3.6.1.4.1.123.3.65.1.1 no-access
This table contains objects for OAM Performance Monitoring of an endpoint (VP or VC) during the current 15 minute interval.
               nncExtPm15MinCurrentEntry 1.3.6.1.4.1.123.3.65.1.1.1 no-access
An entry in the 15 minute current statistics table. Each row contains current statistics for an endpoint collecting PM statistics. Note that for a VP endpoint, the VCI value is 0.
                   nncExtPm15MinCurrentCellFlow 1.3.6.1.4.1.123.3.65.1.1.1.1 nncextpmcellflowdirtype no-access
Link or matrix cell flow
                   nncExtPm15MinCurrentTest 1.3.6.1.4.1.123.3.65.1.1.1.2 nncextpmtesttype no-access
Segment or end-to-end test
                   nncExtPm15MinCurrentState 1.3.6.1.4.1.123.3.65.1.1.1.3 nncextintvlstatetype read-only
The state of the current interval. The object provides a status for those entries which have been reset by the user, or have been subject to a wall clock time change.
                   nncExtPm15MinCurrentAbsoluteIntervalNumber 1.3.6.1.4.1.123.3.65.1.1.1.4 nncextabsintvlnumbertype read-only
The absolute interval number of this interval.
                   nncExtPm15MinCurrentSECBs 1.3.6.1.4.1.123.3.65.1.1.1.5 nncextcounter64 read-only
Severely Errored Cell Blocks. This counter is incremented by one for each PM cell block when M errored, M lost or M misinserted is exceeded.
                   nncExtPm15MinCurrentLostCellsClp0And1 1.3.6.1.4.1.123.3.65.1.1.1.6 nncextcounter64 read-only
Lost 0+1 User Information Cells. For each PM cell block, if the number of Lost 0+1 User Information Cells does not exceed M lost, then this number is added to this counter.
                   nncExtPm15MinCurrentLostCellsClp0 1.3.6.1.4.1.123.3.65.1.1.1.7 nncextcounter64 read-only
Lost 0 User Information Cells. For each PM cell block, if the inferred number of Lost 0 User Information Cells (the smaller value of Lost 0 or 0+1 cells) does not exceed M lost, then this number is added to this counter.
                   nncExtPm15MinCurrentMisinsertedCells 1.3.6.1.4.1.123.3.65.1.1.1.8 nncextcounter64 read-only
Misinserted User Information Cells. For each PM cell block, if the number of excess User Information Cells does not exceed M misinserted, then this number is added to this counter.
                   nncExtPm15MinCurrentCellsClp0And1 1.3.6.1.4.1.123.3.65.1.1.1.9 nncextcounter64 read-only
Number of Transmitted 0+1 User Information Cells. For each PM cell block, the number of 0+1 User Information Cells is added to this counter.
                   nncExtPm15MinCurrentCellsClp0 1.3.6.1.4.1.123.3.65.1.1.1.10 nncextcounter64 read-only
Number of Transmitted 0 User Information Cells. For each PM cell block, the number of 0 User Information Cells is added to this counter.
                   nncExtPm15MinCurrentImpairedBlocks 1.3.6.1.4.1.123.3.65.1.1.1.11 nncextcounter64 read-only
Impaired Blocks. This counter is incremented by one when a PM cell block has at least one impairment of any type.
                   nncExtPm15MinCurrentTotalLostCellsClp0And1 1.3.6.1.4.1.123.3.65.1.1.1.12 nncextcounter64 read-only
Total Lost 0+1 User Information Cells. For each PM cell block, the number of Lost 0+1 User Information Cells is added to this counter.
                   nncExtPm15MinCurrentTotalLostCellsClp0 1.3.6.1.4.1.123.3.65.1.1.1.13 nncextcounter64 read-only
Total Lost 0 User Information Cells. For each PM cell block, the inferred number of Lost 0 User Information Cells (the smaller value of Lost 0 or 0+1 cells) is added to this counter.
                   nncExtPm15MinCurrentIBWithCellLossMisinsert 1.3.6.1.4.1.123.3.65.1.1.1.14 nncextcounter64 read-only
Number of Impaired Blocks with Cell Loss/ Misinsertion. For each PM cell block, the number of lost or misinserted cells is added to this counter.
                   nncExtPm15MinCurrentCellLossRatioClp0And1 1.3.6.1.4.1.123.3.65.1.1.1.15 nncextcounter64 read-only
Cell Loss Ratio 0+1. Ratio of cell loss calculated by ((Total Lost 0+1 User Information Cells) / (Number of Transmitted 0+1 User Information Cells)) * 1000000000. No consideration is made for cells discarded or tagged by UPC.
                   nncExtPm15MinCurrentCellLossRatioClp0 1.3.6.1.4.1.123.3.65.1.1.1.16 nncextcounter64 read-only
Cell Loss Ratio 0. Ratio of cell loss calculated by ((Total Lost 0 User Information Cells) / (Number of Transmitted 0 User Information Cells)) * 1000000000. No consideration is made for cells discarded or tagged by UPC.
           nncExtPm15MinIntervalTable 1.3.6.1.4.1.123.3.65.1.2 no-access
This table contains objects for OAM Performance Monitoring of an endpoint (VP or VC) over a historical stratum of M 15 minute intervals.
               nncExtPm15MinIntervalEntry 1.3.6.1.4.1.123.3.65.1.2.1 no-access
An entry in the 15 minute interval statistics table. Each row contains interval statistics for an endpoint collecting PM statistics. Note that for a VP endpoint, the VCI value is 0.
                   nncExtPm15MinIntervalCellFlow 1.3.6.1.4.1.123.3.65.1.2.1.1 nncextpmcellflowdirtype no-access
Link or matrix cell flow
                   nncExtPm15MinIntervalTest 1.3.6.1.4.1.123.3.65.1.2.1.2 nncextpmtesttype no-access
Segment or end-to-end test
                   nncExtPm15MinIntervalNumber 1.3.6.1.4.1.123.3.65.1.2.1.3 nncextrelintvlnumbertype no-access
The interval number (N) of the statistics in this row.
                   nncExtPm15MinIntervalState 1.3.6.1.4.1.123.3.65.1.2.1.4 nncextintvlstatetype read-only
The state of the interval represented by this row. The object provides a status for those entries which have been reset by the user, or have been subject to a wall clock time change.
                   nncExtPm15MinIntervalAbsoluteIntervalNumber 1.3.6.1.4.1.123.3.65.1.2.1.5 nncextabsintvlnumbertype read-only
The absolute interval number of this interval.
                   nncExtPm15MinIntervalSECBs 1.3.6.1.4.1.123.3.65.1.2.1.6 nncextcounter64 read-only
Severely Errored Cell Blocks. This counter is incremented by one for each PM cell block when M errored, M lost or M misinserted is exceeded.
                   nncExtPm15MinIntervalLostCellsClp0And1 1.3.6.1.4.1.123.3.65.1.2.1.7 nncextcounter64 read-only
Lost 0+1 User Information Cells. For each PM cell block, if the number of Lost 0+1 User Information Cells does not exceed M lost, then this number is added to this counter.
                   nncExtPm15MinIntervalLostCellsClp0 1.3.6.1.4.1.123.3.65.1.2.1.8 nncextcounter64 read-only
Lost 0 User Information Cells. For each PM cell block, if the inferred number of Lost 0 User Information Cells (the smaller value of Lost 0 or 0+1 cells) does not exceed M lost, then this number is added to this counter.
                   nncExtPm15MinIntervalMisinsertedCells 1.3.6.1.4.1.123.3.65.1.2.1.9 nncextcounter64 read-only
Misinserted User Information Cells. For each PM cell block, if the number of excess User Information Cells does not exceed M misinserted, then this number is added to this counter.
                   nncExtPm15MinIntervalCellsClp0And1 1.3.6.1.4.1.123.3.65.1.2.1.10 nncextcounter64 read-only
Number of Transmitted 0+1 User Information Cells. For each PM cell block, the number of 0+1 User Information Cells is added to this counter.
                   nncExtPm15MinIntervalCellsClp0 1.3.6.1.4.1.123.3.65.1.2.1.11 nncextcounter64 read-only
Number of Transmitted 0 User Information Cells. For each PM cell block, the number of 0 User Information Cells is added to this counter.
                   nncExtPm15MinIntervalImpairedBlocks 1.3.6.1.4.1.123.3.65.1.2.1.12 nncextcounter64 read-only
Impaired Blocks. This counter is incremented by one when a PM cell block has at least one impairment of any type.
                   nncExtPm15MinIntervalTotalLostCellsClp0And1 1.3.6.1.4.1.123.3.65.1.2.1.13 nncextcounter64 read-only
Total Lost 0+1 User Information Cells. For each PM cell block, the number of Lost 0+1 User Information Cells is added to this counter.
                   nncExtPm15MinIntervalTotalLostCellsClp0 1.3.6.1.4.1.123.3.65.1.2.1.14 nncextcounter64 read-only
Total Lost 0 User Information Cells. For each PM cell block, the inferred number of Lost 0 User Information Cells (the smaller value of Lost 0 or 0+1 cells) is added to this counter.
                   nncExtPm15MinIntervalIBWithCellLossMisinsert 1.3.6.1.4.1.123.3.65.1.2.1.15 nncextcounter64 read-only
Number of Impaired Blocks with Cell Loss/ Misinsertion. For each PM cell block, the number of lost or misinserted cells is added to this counter.
                   nncExtPm15MinIntervalCellLossRatioClp0And1 1.3.6.1.4.1.123.3.65.1.2.1.16 nncextcounter64 read-only
Cell Loss Ratio 0+1. Ratio of cell loss calculated by ((Total Lost 0+1 User Information Cells) / (Number of Transmitted 0+1 User Information Cells)) * 1000000000. No consideration is made for cells discarded or tagged by UPC.
                   nncExtPm15MinIntervalCellLossRatioClp0 1.3.6.1.4.1.123.3.65.1.2.1.17 nncextcounter64 read-only
Cell Loss Ratio 0. Ratio of cell loss calculated by ((Total Lost 0 User Information Cells) / (Number of Transmitted 0 User Information Cells)) * 1000000000. No consideration is made for cells discarded or tagged by UPC.
           nncExtPm24HrCurrentTable 1.3.6.1.4.1.123.3.65.1.3 no-access
This table contains objects for OAM Performance Monitoring of an endpoint (VP or VC) during the current 24 hour interval.
               nncExtPm24HrCurrentEntry 1.3.6.1.4.1.123.3.65.1.3.1 no-access
An entry in the 24 hour current statistics table. Each row contains current statistics for an endpoint collecting PM statistics. Note that for a VP endpoint, the VCI value is 0.
                   nncExtPm24HrCurrentCellFlow 1.3.6.1.4.1.123.3.65.1.3.1.1 nncextpmcellflowdirtype no-access
Link or matrix cell flow
                   nncExtPm24HrCurrentTest 1.3.6.1.4.1.123.3.65.1.3.1.2 nncextpmtesttype no-access
Segment or end-to-end test
                   nncExtPm24HrCurrentState 1.3.6.1.4.1.123.3.65.1.3.1.3 nncextintvlstatetype read-only
The state of the current interval. The object provides a status for those entries which have been reset by the user, or have been subject to a wall clock time change.
                   nncExtPm24HrCurrentAbsoluteIntervalNumber 1.3.6.1.4.1.123.3.65.1.3.1.4 nncextabsintvlnumbertype read-only
The absolute interval number of this interval.
                   nncExtPm24HrCurrentSECBs 1.3.6.1.4.1.123.3.65.1.3.1.5 nncextcounter64 read-only
Severely Errored Cell Blocks. This counter is incremented by one for each PM cell block when M errored, M lost or M misinserted is exceeded.
                   nncExtPm24HrCurrentErroredCells 1.3.6.1.4.1.123.3.65.1.3.1.6 nncextcounter64 read-only
Errored Cells. For each PM cell block, if the number of errored cells does not exceed M errored, then this number is added to this counter.
                   nncExtPm24HrCurrentLostCellsClp0And1 1.3.6.1.4.1.123.3.65.1.3.1.7 nncextcounter64 read-only
Lost 0+1 User Information Cells. For each PM cell block, if the number of Lost 0+1 User Information Cells does not exceed M lost, then this number is added to this counter.
                   nncExtPm24HrCurrentLostCellsClp0 1.3.6.1.4.1.123.3.65.1.3.1.8 nncextcounter64 read-only
Lost 0 User Information Cells. For each PM cell block, if the inferred number of Lost 0 User Information Cells (the smaller value of Lost 0 or 0+1 cells) does not exceed M lost, then this number is added to this counter.
                   nncExtPm24HrCurrentMisinsertedCells 1.3.6.1.4.1.123.3.65.1.3.1.9 nncextcounter64 read-only
Misinserted User Information Cells. For each PM cell block, if the number of excess User Information Cells does not exceed M misinserted, then this number is added to this counter.
                   nncExtPm24HrCurrentCellsClp0And1 1.3.6.1.4.1.123.3.65.1.3.1.10 nncextcounter64 read-only
Number of Transmitted 0+1 User Information Cells. For each PM cell block, the number of 0+1 User Information Cells is added to this counter.
                   nncExtPm24HrCurrentCellsClp0 1.3.6.1.4.1.123.3.65.1.3.1.11 nncextcounter64 read-only
Number of Transmitted 0 User Information Cells. For each PM cell block, the number of 0 User Information Cells is added to this counter.
                   nncExtPm24HrCurrentImpairedBlocks 1.3.6.1.4.1.123.3.65.1.3.1.12 nncextcounter64 read-only
Impaired Blocks. This counter is incremented by one when a PM cell block has at least one impairment of any type.
                   nncExtPm24HrCurrentTotalLostCellsClp0And1 1.3.6.1.4.1.123.3.65.1.3.1.13 nncextcounter64 read-only
Total Lost 0+1 User Information Cells. For each PM cell block, the number of Lost 0+1 User Information Cells is added to this counter.
                   nncExtPm24HrCurrentTotalLostCellsClp0 1.3.6.1.4.1.123.3.65.1.3.1.14 nncextcounter64 read-only
Total Lost 0 User Information Cells. For each PM cell block, the inferred number of Lost 0 User Information Cells (the smaller value of Lost 0 or 0+1 cells) is added to this counter.
                   nncExtPm24HrCurrentSECBErrored 1.3.6.1.4.1.123.3.65.1.3.1.15 nncextcounter64 read-only
SECB Errored (i.e. SECB due to bit errors). This counter is incremented by one for each PM cell block when M errored is exceeded.
                   nncExtPm24HrCurrentSECBMisinserted 1.3.6.1.4.1.123.3.65.1.3.1.16 nncextcounter64 read-only
SECB Misinserted (i.e. SECB due to misinserted cells). This counter is incremented by one for each PM cell block when M misinserted is exceeded.
                   nncExtPm24HrCurrentIBWithCellLossMisinsert 1.3.6.1.4.1.123.3.65.1.3.1.17 nncextcounter64 read-only
Number of Impaired Blocks with Cell Loss/ Misinsertion. For each PM cell block, the number of lost or misinserted cells is added to this counter.
                   nncExtPm24HrCurrentCellLossRatioClp0And1 1.3.6.1.4.1.123.3.65.1.3.1.18 nncextcounter64 read-only
Cell Loss Ratio 0+1. Ratio of cell loss calculated by ((Total Lost 0+1 User Information Cells) / (Number of Transmitted 0+1 User Information Cells)) * 1000000000. No consideration is made for cells discarded or tagged by UPC.
                   nncExtPm24HrCurrentCellLossRatioClp0 1.3.6.1.4.1.123.3.65.1.3.1.19 nncextcounter64 read-only
Cell Loss Ratio 0. Ratio of cell loss calculated by ((Total Lost 0 User Information Cells) / (Number of Transmitted 0 User Information Cells)) * 1000000000. No consideration is made for cells discarded or tagged by UPC.
           nncExtPm24HrIntervalTable 1.3.6.1.4.1.123.3.65.1.4 no-access
This table contains objects for OAM Performance Monitoring of an endpoint (VP or VC) over a historical stratum of N 24 hour intervals.
               nncExtPm24HrIntervalEntry 1.3.6.1.4.1.123.3.65.1.4.1 no-access
An entry in the 24 hour interval statistics table. Each row contains interval statistics for an endpoint collecting PM statistics. Note that for a VP endpoint, the VCI value is 0.
                   nncExtPm24HrIntervalCellFlow 1.3.6.1.4.1.123.3.65.1.4.1.1 nncextpmcellflowdirtype no-access
Link or matrix cell flow
                   nncExtPm24HrIntervalTest 1.3.6.1.4.1.123.3.65.1.4.1.2 nncextpmtesttype no-access
Segment or end-to-end test
                   nncExtPm24HrIntervalNumber 1.3.6.1.4.1.123.3.65.1.4.1.3 nncextrelintvlnumbertype no-access
The interval number (N) of the statistics in this row.
                   nncExtPm24HrIntervalState 1.3.6.1.4.1.123.3.65.1.4.1.4 nncextintvlstatetype read-only
The state of the interval represented by this row. The object provides a status for those entries which have been reset by the user, or have been subject to a wall clock time change.
                   nncExtPm24HrIntervalAbsoluteIntervalNumber 1.3.6.1.4.1.123.3.65.1.4.1.5 nncextabsintvlnumbertype read-only
The absolute interval number of this interval.
                   nncExtPm24HrIntervalSECBs 1.3.6.1.4.1.123.3.65.1.4.1.6 nncextcounter64 read-only
Severely Errored Cell Blocks. This counter is incremented by one for each PM cell block when M errored, M lost or M misinserted is exceeded.
                   nncExtPm24HrIntervalErroredCells 1.3.6.1.4.1.123.3.65.1.4.1.7 nncextcounter64 read-only
Errored Cells. For each PM cell block, if the number of errored cells does not exceed M errored, then this number is added to this counter.
                   nncExtPm24HrIntervalLostCellsClp0And1 1.3.6.1.4.1.123.3.65.1.4.1.8 nncextcounter64 read-only
Lost 0+1 User Information Cells. For each PM cell block, if the number of Lost 0+1 User Information Cells does not exceed M lost, then this number is added to this counter.
                   nncExtPm24HrIntervalLostCellsClp0 1.3.6.1.4.1.123.3.65.1.4.1.9 nncextcounter64 read-only
Lost 0 User Information Cells. For each PM cell block, if the inferred number of Lost 0 User Information Cells (the smaller value of Lost 0 or 0+1 cells) does not exceed M lost, then this number is added to this counter.
                   nncExtPm24HrIntervalMisinsertedCells 1.3.6.1.4.1.123.3.65.1.4.1.10 nncextcounter64 read-only
Misinserted User Information Cells. For each PM cell block, if the number of excess User Information Cells does not exceed M misinserted, then this number is added to this counter.
                   nncExtPm24HrIntervalCellsClp0And1 1.3.6.1.4.1.123.3.65.1.4.1.11 nncextcounter64 read-only
Number of Transmitted 0+1 User Information Cells. For each PM cell block, the number of 0+1 User Information Cells is added to this counter.
                   nncExtPm24HrIntervalCellsClp0 1.3.6.1.4.1.123.3.65.1.4.1.12 nncextcounter64 read-only
Number of Transmitted 0 User Information Cells. For each PM cell block, the number of 0 User Information Cells is added to this counter.
                   nncExtPm24HrIntervalImpairedBlocks 1.3.6.1.4.1.123.3.65.1.4.1.13 nncextcounter64 read-only
Impaired Blocks. This counter is incremented by one when a PM cell block has at least one impairment of any type.
                   nncExtPm24HrIntervalTotalLostCellsClp0And1 1.3.6.1.4.1.123.3.65.1.4.1.14 nncextcounter64 read-only
Total Lost 0+1 User Information Cells. For each PM cell block, the number of Lost 0+1 User Information Cells is added to this counter.
                   nncExtPm24HrIntervalTotalLostCellsClp0 1.3.6.1.4.1.123.3.65.1.4.1.15 nncextcounter64 read-only
Total Lost 0 User Information Cells. For each PM cell block, the inferred number of Lost 0 User Information Cells (the smaller value of Lost 0 or 0+1 cells) is added to this counter.
                   nncExtPm24HrIntervalSECBErrored 1.3.6.1.4.1.123.3.65.1.4.1.16 nncextcounter64 read-only
SECB Errored (i.e. SECB due to bit errors). This counter is incremented by one for each PM cell block when M errored is exceeded.
                   nncExtPm24HrIntervalSECBMisinserted 1.3.6.1.4.1.123.3.65.1.4.1.17 nncextcounter64 read-only
SECB Misinserted (i.e. SECB due to misinserted cells). This counter is incremented by one for each PM cell block when M misinserted is exceeded.
                   nncExtPm24HrIntervalIBWithCellLossMisinsert 1.3.6.1.4.1.123.3.65.1.4.1.18 nncextcounter64 read-only
Number of Impaired Blocks with Cell Loss/ Misinsertion. For each PM cell block, the number of lost or misinserted cells is added to this counter.
                   nncExtPm24HrIntervalCellLossRatioClp0And1 1.3.6.1.4.1.123.3.65.1.4.1.19 nncextcounter64 read-only
Cell Loss Ratio 0+1. Ratio of cell loss calculated by ((Total Lost 0+1 User Information Cells) / (Number of Transmitted 0+1 User Information Cells)) * 1000000000. No consideration is made for cells discarded or tagged by UPC.
                   nncExtPm24HrIntervalCellLossRatioClp0 1.3.6.1.4.1.123.3.65.1.4.1.20 nncextcounter64 read-only
Cell Loss Ratio 0. Ratio of cell loss calculated by ((Total Lost 0 User Information Cells) / (Number of Transmitted 0 User Information Cells)) * 1000000000. No consideration is made for cells discarded or tagged by UPC.
       nncExtPmStatisticsTraps 1.3.6.1.4.1.123.3.65.2
       nncExtPmStatisticsGroups 1.3.6.1.4.1.123.3.65.3
           nncExtPm15MinCurrentGroup 1.3.6.1.4.1.123.3.65.3.1
A collection of objects providing current 15 min PM statistics for a PM sink point.
           nncExtPm15MinIntervalGroup 1.3.6.1.4.1.123.3.65.3.2
A collection of objects providing interval 15 min PM statistics for a PM sink point.
           nncExtPm24HrCurrentGroup 1.3.6.1.4.1.123.3.65.3.3
A collection of objects providing current 24 hour PM statistics for a PM sink point.
           nncExtPm24HrIntervalGroup 1.3.6.1.4.1.123.3.65.3.4
A collection of objects providing interval 24 hour PM statistics for a PM sink point.
       nncExtPmStatisticsCompliances 1.3.6.1.4.1.123.3.65.4
           nncExtPmStatisticsCompliance 1.3.6.1.4.1.123.3.65.4.1
The compliance statement for Newbridge OAM Performance Monitoring extension.