NMS-HAL-GLOBAL-MIB: View SNMP OID List / Download MIB

VENDOR: SHANGHAI BAUD DATA COMMUNICATION DEVELOPMENT


 Home MIB: NMS-HAL-GLOBAL-MIB
Download as:   
SNMPv2-CONF, NMS-SWITCH-MIB, IF-MIB, SNMPv2-SMI, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 switchHALGlobal 1.3.6.1.4.1.3320.9.1.1.1.1
     eapsLinkScanInterval 1.3.6.1.4.1.3320.9.1.1.1.1.1 integer read-write
Scan interval of port link status for EAPS. The range is from 10ms to 1000ms. Unit is 1ms. For IESwitch, default value is 10ms. For others, default value is 1000ms.
     systemMTU 1.3.6.1.4.1.3320.9.1.1.1.1.2 integer read-write
System MTU. Unit is 1byte. Default value is 1510bytes.
     shareLoad 1.3.6.1.4.1.3320.9.1.1.1.1.3 integer read-write
Share way of fabric bandwidth. Only valid for 85. 1 for single MCU data chanel and 2 for multishare MCU data chanel. Default is single. Enumeration: 'single': 1, 'multishare': 2.
     shareLoadBalance 1.3.6.1.4.1.3320.9.1.1.1.1.4 integer read-write
The balance way for HiG channel. Only valid for 85. 1 for default, 2 for both-mac, 3 for both-ip, 4 for dest-mac, 5 for dest-ip, 6 for src-mac, 7 for src-ip, 8 for src-port. Enumeration: 'dest-ip': 5, 'dest-mac': 4, 'both-mac': 2, 'default': 1, 'src-mac': 6, 'src-ip': 7, 'src-port': 8, 'both-ip': 3.
     errorFrameThreshold 1.3.6.1.4.1.3320.9.1.1.1.1.5 integer read-write
The threshold of error frame alarm. The range is for 1 - 1000000. Unit is packet. Default is 10 packets.
     errorFramePeriod 1.3.6.1.4.1.3320.9.1.1.1.1.6 integer read-write
The period of error frame sampling. The range is for 1 - 3600. Unit is second. Default is 10S.
     arpPriority 1.3.6.1.4.1.3320.9.1.1.1.1.7 integer read-write
The ARP packet priority to host CPU. The range is 0-7. Default is 0.
     bgpPriority 1.3.6.1.4.1.3320.9.1.1.1.1.8 integer read-write
The BGP packet priority to host CPU. The range is 0-7. Default is 0.
     bpduPriority 1.3.6.1.4.1.3320.9.1.1.1.1.9 integer read-write
The BPDU packet priority to host CPU. The range is 0-7. Default is 3.
     dhcpPriority 1.3.6.1.4.1.3320.9.1.1.1.1.10 integer read-write
The DHCP packet priority to host CPU. The range is 0-7. Default is 0.
     igmpPriority 1.3.6.1.4.1.3320.9.1.1.1.1.11 integer read-write
The IGMP packet priority to host CPU. The range is 0-7. Default is 0.
     reservedIPMCPriority 1.3.6.1.4.1.3320.9.1.1.1.1.12 integer read-write
The ReservedIPMC packet priority to host CPU. The range is 0-7. Default is 0.
     lookupFailPriority 1.3.6.1.4.1.3320.9.1.1.1.1.13 integer read-write
The look up failed packet priority to host CPU. The range is 0-7. Default is 0.
     protoExecPriority 1.3.6.1.4.1.3320.9.1.1.1.1.14 integer read-write
The TTL=1 packet priority to host CPU. The range is 0-7. Default is 0.
     defaultPriority 1.3.6.1.4.1.3320.9.1.1.1.1.15 integer read-write
The default packet priority to host CPU. The range is 0-7. Default is 0.
     cpuPortThreshold 1.3.6.1.4.1.3320.9.1.1.1.1.16 integer read-write
The rate limitation of cpu port. Unit is 64kbps. The range is 1-1562. 0 means disable. Default is 0.
     l2TblHashAlgo 1.3.6.1.4.1.3320.9.1.1.1.1.17 integer read-write
The hash algorithm of MAC address table. The range is 1-5. 1 means CRC32 upper,2 means CRC32 lower, 3 means LSB,4 means CRC16 lower,5 means CRC16 upper. Default is 2. Enumeration: 'crc32upper': 1, 'crc14lower': 4, 'crc16upper': 5, 'lsb': 3, 'crc32lower': 2.
     cutThrough 1.3.6.1.4.1.3320.9.1.1.1.1.18 integer read-write
The cut-through of switching function. The range is disable/enable. 0 means disable 1 means enable. Default is 0. Enumeration: 'enable': 1, 'disable': 0.