NIS-3500-2208PCE: View SNMP OID List / Download MIB

VENDOR: SUPERCOM


 Home MIB: NIS-3500-2208PCE
Download as:   

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 private 1.3.6.1.4
     enterprises 1.3.6.1.4.1
         company 1.3.6.1.4.1.25972
                     switches 1.3.6.1.4.1.25972.0
                         managedPoeSwitch 1.3.6.1.4.1.25972.0.5
                             nis_3500_2208pce 1.3.6.1.4.1.25972.0.5.20
                                   contact 1.3.6.1.4.1.25972.0.5.20.0
The MIB module is for Industrial Ethernet Switch and compatible to firmware kernel version 2.46 or higher.
                                   systemInfo 1.3.6.1.4.1.25972.0.5.20.1
                                       systemName 1.3.6.1.4.1.25972.0.5.20.1.1 displaystring read-only
An administratively-assigned name for this managed node. By convention, this is the node's fully-qualified domain name.
                                       systemLocation 1.3.6.1.4.1.25972.0.5.20.1.2 displaystring read-only
The physical location of this node (e.g., `telephone closet, 3rd floor').
                                       systemContact 1.3.6.1.4.1.25972.0.5.20.1.3 displaystring read-only
The contact information of system.
                                       systemDescr 1.3.6.1.4.1.25972.0.5.20.1.4 displaystring read-only
A textual description of the entity. This value should include the full name and version identification of the system's hardware type, software operating-system, and networking software. It is mandatory that this only contain printable ASCII characters.
                                       systemFwVer 1.3.6.1.4.1.25972.0.5.20.1.5 displaystring read-only
Firmware version of the device.
                                       systemMacAddress 1.3.6.1.4.1.25972.0.5.20.1.6 macaddress read-only
The MAC address of switch.
                                   basicSetting 1.3.6.1.4.1.25972.0.5.20.2
                                       switchSetting 1.3.6.1.4.1.25972.0.5.20.2.1
                                           switchSettingSystemName 1.3.6.1.4.1.25972.0.5.20.2.1.1 displaystring read-write
An administratively-assigned name for this managed node. By convention, this is the node's fully-qualified domain name.
                                           switchSettingSystemLocation 1.3.6.1.4.1.25972.0.5.20.2.1.2 displaystring read-write
The physical location of this node (e.g., `telephone closet, 3rd floor').
                                           switchSettingSystemContact 1.3.6.1.4.1.25972.0.5.20.2.1.3 displaystring read-write
The contact information of system.
                                           switchSettingLocationAlert 1.3.6.1.4.1.25972.0.5.20.2.1.4 integer read-write
The location alert function. Enumeration: 'disabled': 2, 'enabled': 1.
                                       adminPassword 1.3.6.1.4.1.25972.0.5.20.2.2
                                           adminPasswordUserName 1.3.6.1.4.1.25972.0.5.20.2.2.1 displaystring read-write
The name(ID) of security manager.
                                           adminPassword_Password 1.3.6.1.4.1.25972.0.5.20.2.2.2 displaystring read-write
The password of security manager. This object can't be read. it's write-only.
                                       ipConfiguration 1.3.6.1.4.1.25972.0.5.20.2.3
                                           ipConfigurationTable 1.3.6.1.4.1.25972.0.5.20.2.3.1 no-access
Table of descriptive information and configuration about IP of switche.
                                               ipConfigurationEntry 1.3.6.1.4.1.25972.0.5.20.2.3.1.1 no-access
An entry in the table, containing IP/DHCP-client information of the switch.
                                                   ipConfigurationIndex 1.3.6.1.4.1.25972.0.5.20.2.3.1.1.1 integer32 no-access
This object identifies the switch within the system for which this entry contains information. This value can never be greater than switchNumber.
                                                   ipConfigurationDHCPStatus 1.3.6.1.4.1.25972.0.5.20.2.3.1.1.2 integer read-write
Parameter to enable or disable DHCP client function of the switch. When enabled, device will be a DHCP client and request the IP configuration from DHCP server. Note: Other items in this table couldn't be modified, when ipConfigurationDHCPStatus is enabled. Enumeration: 'disabled': 2, 'enabled': 1.
                                                   ipConfigurationAddress 1.3.6.1.4.1.25972.0.5.20.2.3.1.1.3 ipaddress read-write
The IP address of switch.
                                                   ipConfigurationSubMask 1.3.6.1.4.1.25972.0.5.20.2.3.1.1.4 ipaddress read-write
The subnet mask of switch.
                                                   ipConfigurationGateway 1.3.6.1.4.1.25972.0.5.20.2.3.1.1.5 ipaddress read-write
The gateway address of switch.
                                                   ipConfigurationDNS1 1.3.6.1.4.1.25972.0.5.20.2.3.1.1.6 ipaddress read-write
The DNS1 address of switch.
                                                   ipConfigurationDNS2 1.3.6.1.4.1.25972.0.5.20.2.3.1.1.7 ipaddress read-write
The DNS2 address of switch.
                                       sntp 1.3.6.1.4.1.25972.0.5.20.2.4
                                           sntpClientStatus 1.3.6.1.4.1.25972.0.5.20.2.4.1 integer read-write
(1)Enable SNTP clinet. (2)Disable SNTP clinet. SNTP is simple network time protocol. Use this OID to Enable/Disable SNTP client. Enumeration: 'disabled': 2, 'enabled': 1.
                                           sntpDaylightSavingTime 1.3.6.1.4.1.25972.0.5.20.2.4.2 integer read-write
(1)Enable Daylight Saving Time. (2)Disable Daylight Saving Time. Daylight Saving Time: Use this OID to Enable/Disable Daylight Saving Time. Enumeration: 'disabled': 2, 'enabled': 1.
                                           sntpUTCTimezone 1.3.6.1.4.1.25972.0.5.20.2.4.3 integer read-write
UTC Timezone. Enumeration: 'gmt-positive-02-00-Harare-Pretoria': 31, 'gmt-negative-09-00-Alaska': 4, 'gmt-negative-03-30-Newfoundland': 17, 'gmt-positive-01-00-Amsterdam-Berlin-Bern-Rome-Stockholm-Vienna': 24, 'gmt-positive-02-00-Cairo': 30, 'gmt-positive-01-00-Brussels-Copenhagen-Madrid-Paris-Vilnius': 26, 'gmt-positive-05-00-Ekaterinburg': 41, 'gmt-negative-10-00-Hawaii': 3, 'gmt-positive-10-00-Brisbane': 56, 'gmt-positive-07-00-Bangkok-Hanoi-Jakarta': 46, 'gmt-positive-09-30-Darwin': 55, 'gmt-positive-08-00-Singapore': 49, 'gmt-positive-03-30-Tehran': 37, 'gmt-positive-12-00-Auckland-Wllington': 62, 'gmt-positive-11-00-Magadan-Solomon-Is-New-Caledonia': 61, 'gmt-positive-10-00-Guam-Port-Moresby': 58, 'gmt-positive-08-00-Perth': 48, 'gmt-positive-03-00-Moscow-St-Petersburg-Volgograd': 35, 'gmt-positive-08-00-Taipei': 50, 'gmt-positive-04-00-Baku-Tbilisi': 39, 'gmt-negative-07-00-Arizona': 6, 'gmt-positive-10-00-Canberra-Melbourne-Sydney': 57, 'gmt-negative-04-00-Caracas-La-Paz': 15, 'gmt-negative-06-00-Saskatchewan': 10, 'gmt-positive-06-00-Astana-Almaty-Dhaka': 44, 'gmt-negative-01-00-Azores-Cape-Verde-Is': 21, 'gmt-negative-06-00-Mexico-City-Tegucigalpa': 9, 'gmt-positive-09-00-Yakutsk': 53, 'gmt-positive-09-00-Seoul': 52, 'gmt-Casablanca-Monrovia': 22, 'gmt-negative-11-00-Midway-Island-Samoa': 2, 'gmt-positive-02-00-Bucharest': 29, 'gmt-positive-04-00-Abu-Dhabi-Muscat': 38, 'gmt-positive-12-00-Fiji-Kamchatka-Marshall-Is': 63, 'gmt-positive-09-30-Adelaide': 54, 'gmt-positive-09-00-Osaka-Sapporo-Tokyo': 51, 'gmt-positive-05-30-Bombay-Calcutta-Madras-New-Delhi': 43, 'gmt-negative-03-00-Brasilia': 18, 'gmt-negative-02-00-Mid-Atlantic': 20, 'gmt-negative-08-00-Pacific-Time-US-and-Canada-Tijuana': 5, 'gmt-negative-05-00-Bogota-Lima-Quito': 11, 'gmt-positive-06-00-Colombo': 45, 'gmt-positive-03-00-Baghdad-Kuwait-Riyadh': 34, 'gmt-positive-02-00-Athens-Istanbul-Minsk': 28, 'gmt-negative-03-00-Buenos-Aires-Georgetown': 19, 'gmt-positive-05-00-Islamabad-Karachi-Tashkent': 42, 'gmt-negative-05-00-Indiana-East': 13, 'gmt-positive-10-00-Hobart': 59, 'gmt-negative-05-00-Eastern-Time-US-and-Canada': 12, 'gmt-negative-06-00-Central-Time-US-and-Canada': 8, 'gmt-positive-04-30-Kabul': 40, 'gmt-positive-03-00-Mairobi': 36, 'gmt-positive-01-00-Belgrade-Bratislava-Budapest-Ljubljana-Prague': 25, 'gmt-positive-01-00-Sarajevo-Skopje-Sofija-Warsaw-Zagreb': 27, 'gmt-positive-02-00-Helsinki-Riga-Tallinn': 32, 'gmt-negative-04-00-Santiago': 16, 'gmt-Greenwich-Mean-Time-Dublin-Edinburgh-Lisbon-London': 23, 'gmt-negative-04-00-Atlantic-Time-Canada': 14, 'gmt-negative-12-00-Eniwetok-Kwajalein': 1, 'gmt-positive-10-00-Vladivostok': 60, 'gmt-negative-07-00-Mountain-Time-US-and-Canada': 7, 'gmt-positive-08-00-Beijing-Chongqing-Hong-Kong-Urumqi': 47, 'gmt-positive-02-00-Jerusalem': 33.
                                           sntpServerAddress 1.3.6.1.4.1.25972.0.5.20.2.4.4 displaystring read-write
The address of a SNTP Server.
                                           sntpSwitchTimer 1.3.6.1.4.1.25972.0.5.20.2.4.5 displaystring read-only
The switch timer.
                                           sntpDaylightSavingPeriodStart 1.3.6.1.4.1.25972.0.5.20.2.4.6 displaystring read-write
The start-time of daylight saveing period, format: yyyymmdd hh:mm.
                                           sntpDaylightSavingPeriodEnd 1.3.6.1.4.1.25972.0.5.20.2.4.7 displaystring read-write
The end-time of daylight saveing period, format: yyyymmdd hh:mm.
                                           sntpDaylightSavingOffset 1.3.6.1.4.1.25972.0.5.20.2.4.8 integer32 read-write
Daylight Saving Offset(Usually is 60 mins). When Enable and current time at Daylight Saving Period, the current time of the switch will be offseted by Daylight Saving Offset.
                                       lldp 1.3.6.1.4.1.25972.0.5.20.2.5
                                           lldpStatus 1.3.6.1.4.1.25972.0.5.20.2.5.1 integer read-write
LLDP Configuration. (1) Enable. (2) Disable. Enumeration: 'enable': 1, 'disable': 2.
                                           lldpInterval 1.3.6.1.4.1.25972.0.5.20.2.5.2 integer32 read-write
LLDP Interval.
                                       autoProvision 1.3.6.1.4.1.25972.0.5.20.2.6
                                           autoProvisionConfigurationStatus 1.3.6.1.4.1.25972.0.5.20.2.6.1 integer read-write
Auto Provision for Switch Configuration. (1) Enable. (2) Disable. Enumeration: 'enable': 1, 'disable': 2.
                                           autoProvisionConfigurationServerip 1.3.6.1.4.1.25972.0.5.20.2.6.2 ipaddress read-write
The IP address of TFTP server.
                                           autoProvisionConfigurationFilename 1.3.6.1.4.1.25972.0.5.20.2.6.3 displaystring read-write
The filename of firmware.
                                           autoProvisionImageStatus 1.3.6.1.4.1.25972.0.5.20.2.6.4 integer read-write
Auto Provision for firmware image. (1) Enable. (2) Disable. Enumeration: 'enable': 1, 'disable': 2.
                                           autoProvisionImageServerip 1.3.6.1.4.1.25972.0.5.20.2.6.5 ipaddress read-write
The IP address of TFTP server.
                                           autoProvisionImageFilename 1.3.6.1.4.1.25972.0.5.20.2.6.6 displaystring read-write
The filename of firmware.
                                       backupAndRestore 1.3.6.1.4.1.25972.0.5.20.2.7
                                           backupServerIP 1.3.6.1.4.1.25972.0.5.20.2.7.1 ipaddress read-write
The IP address of a TFTP server from which a firmware image can be uploaded.
                                           backupAgentBoardFwFileName 1.3.6.1.4.1.25972.0.5.20.2.7.2 displaystring read-write
                                           backupStatus 1.3.6.1.4.1.25972.0.5.20.2.7.3 integer read-write
Setting this object to active(1) triger the TFTP upload action. Setting this object to notActive(2) has no effect. The system always returns the value notActive(2) when this object is read. Enumeration: 'active': 1, 'notActive': 2.
                                           restoreServerIP 1.3.6.1.4.1.25972.0.5.20.2.7.4 ipaddress read-write
The IP address of a TFTP server from which a firmware image can be downloaded.
                                           restoreAgentBoardFwFileName 1.3.6.1.4.1.25972.0.5.20.2.7.5 displaystring read-write
                                           restoreStatus 1.3.6.1.4.1.25972.0.5.20.2.7.6 integer read-write
Setting this object to active(1) triger the TFTP download action. Setting this object to notActive(2) has no effect. The system always returns the value notActive(2) when this object is read. Enumeration: 'active': 1, 'notActive': 2.
                                       upgradeFirmware 1.3.6.1.4.1.25972.0.5.20.2.8
                                           tftpDownloadServerIP 1.3.6.1.4.1.25972.0.5.20.2.8.1 ipaddress read-write
The IP address of a TFTP server from which a firmware image can be downloaded.
                                           tftpDownloadAgentBoardFwFileName 1.3.6.1.4.1.25972.0.5.20.2.8.2 displaystring read-write
                                           tftpDownloadStatus 1.3.6.1.4.1.25972.0.5.20.2.8.3 integer read-write
Setting this object to active(1) triger the TFTP download action. Setting this object to notActive(2) has no effect. The system always returns the value notActive(2) when this object is read. Enumeration: 'active': 1, 'notActive': 2.
                                   dhcpServer 1.3.6.1.4.1.25972.0.5.20.3
                                       dhcpServerCfgTable 1.3.6.1.4.1.25972.0.5.20.3.1 no-access
Table of descriptive information and configuration about DHCP server of the switch.
                                           dhcpServerCfgEntry 1.3.6.1.4.1.25972.0.5.20.3.1.1 no-access
An entry in the table, containing DHCP server information of the switch.
                                               dhcpServerCfgIndex 1.3.6.1.4.1.25972.0.5.20.3.1.1.1 integer32 no-access
This object identifies the switch within the system for which this entry contains information. This value can never be greater than switchNumber.
                                               dhcpServerCfgStatus 1.3.6.1.4.1.25972.0.5.20.3.1.1.2 integer read-write
Parameter to enable or disable DHCP server function of the switch. When enabled, the device will be a DHCP server and provide the IP configurations for other DHCP clients. Note: Other items in this table couldn't be modified, when dhcpServerCfgStatus is disabled. Enumeration: 'disabled': 2, 'enabled': 1.
                                               dhcpServerCfgLowIPAddr 1.3.6.1.4.1.25972.0.5.20.3.1.1.3 ipaddress read-write
This object defines the low boundary of DHCP server IP pool.
                                               dhcpServerCfgHighIPAddr 1.3.6.1.4.1.25972.0.5.20.3.1.1.4 ipaddress read-write
This object defines the high boundary of DHCP server IP pool.
                                               dhcpServerCfgSubMask 1.3.6.1.4.1.25972.0.5.20.3.1.1.5 ipaddress read-write
The subnet mask of IP configuration for DHCP clients.
                                               dhcpServerCfgGateway 1.3.6.1.4.1.25972.0.5.20.3.1.1.6 ipaddress read-write
The gateway address of IP configuration for DHCP clients.
                                               dhcpServerCfgDNS 1.3.6.1.4.1.25972.0.5.20.3.1.1.7 ipaddress read-write
The DNS address of IP configuration for DHCP clients.
                                               dhcpServerCfgLeaseTime 1.3.6.1.4.1.25972.0.5.20.3.1.1.8 integer32 read-write
The lease time(in second) of DHCP clients.
                                       dhcpServerClientInfoTable 1.3.6.1.4.1.25972.0.5.20.3.2 no-access
Table of descriptive information about current status of each DHCP client registered.
                                           dhcpServerClientInfoEntry 1.3.6.1.4.1.25972.0.5.20.3.2.1 no-access
An entry in the table, containing DHCP clients information.
                                               dhcpServerClientInfoIndex 1.3.6.1.4.1.25972.0.5.20.3.2.1.1 integer32 read-only
Index of DHCP client.
                                               dhcpServerClientInfoIPAddr 1.3.6.1.4.1.25972.0.5.20.3.2.1.2 displaystring read-only
The IP address of client.
                                               dhcpServerClientInfoID 1.3.6.1.4.1.25972.0.5.20.3.2.1.3 displaystring read-only
The ID(MAC address) of client.
                                               dhcpServerClientInfoType 1.3.6.1.4.1.25972.0.5.20.3.2.1.4 displaystring read-only
The type of client. bootptab: Entry comes from bootptab file. dynamic: Entry is dynamiclly created w/defaults for dhcp offer. sniffed: Entry is learned by snooping on net traffic. dbase: Entry is manually entered by user.
                                               dhcpServerClientInfoStatus 1.3.6.1.4.1.25972.0.5.20.3.2.1.5 displaystring read-only
The status of client. Unassigned: none of the following. BOOTP: Entry has been assigned via plain bootp. DHCPOffer: Entry has a dhcp offer pending. DHCP: Entry has been assigned via DHCP.
                                               dhcpServerClientInfoLease 1.3.6.1.4.1.25972.0.5.20.3.2.1.6 integer32 read-only
The lease time of client(in second).
                                       dhcpServerIPBindingTable 1.3.6.1.4.1.25972.0.5.20.3.3 no-access
Table of descriptive information and configuration about IP binding of DHCP server.
                                           dhcpServerIPBindingEntry 1.3.6.1.4.1.25972.0.5.20.3.3.1 no-access
An entry in the table, containing IP binding information of DHCP server.
                                               dhcpServerIPBindingPortNum 1.3.6.1.4.1.25972.0.5.20.3.3.1.1 integer32 read-only
The port number.
                                               dhcpServerIPBindingAddr 1.3.6.1.4.1.25972.0.5.20.3.3.1.2 ipaddress read-write
The IP binding address.
                                   portSetting 1.3.6.1.4.1.25972.0.5.20.4
                                       portControl 1.3.6.1.4.1.25972.0.5.20.4.1
                                           portCtrlTable 1.3.6.1.4.1.25972.0.5.20.4.1.1 no-access
Table of status information and configuration about each switch ports(including expansion slot).
                                               portCtrlEntry 1.3.6.1.4.1.25972.0.5.20.4.1.1.1 no-access
An entry in the table, containing information about configuration in one switch port of the switch.
                                                   portCtrlIndex 1.3.6.1.4.1.25972.0.5.20.4.1.1.1.1 integer32 no-access
Index of port management table.
                                                   portCtrlPortName 1.3.6.1.4.1.25972.0.5.20.4.1.1.1.2 displaystring read-only
The name of port.
                                                   portCtrlPortStatus 1.3.6.1.4.1.25972.0.5.20.4.1.1.1.3 integer read-write
To disable (or enable) control of this port. Enumeration: 'disabled': 2, 'enabled': 1.
                                                   portCtrlNegotiation 1.3.6.1.4.1.25972.0.5.20.4.1.1.1.4 integer read-write
The mode of network negoticaion, (1)Automatic (2)Force Enumeration: 'auto': 1, 'force': 2.
                                                   portCtrlSpeed 1.3.6.1.4.1.25972.0.5.20.4.1.1.1.5 integer read-write
Set the speed of the port. If portCtrlNegotiation is auto, this object can't be modified. Enumeration: 'speed-1000M': 3, 'speed-100M': 2, 'speed-10M': 1.
                                                   portCtrlDuplex 1.3.6.1.4.1.25972.0.5.20.4.1.1.1.6 integer read-write
Set full-duplex or half-duplex mode of the port. If portCtrlNegotiation is auto, this object can't be modified. Enumeration: 'fullduplex': 1, 'halfduplex': 2.
                                                   portCtrlFlowControl 1.3.6.1.4.1.25972.0.5.20.4.1.1.1.7 integer read-write
Set flow control. Enumeration: 'symmetric': 2, 'asymmetric': 3, 'disable': 1.
                                                   portCtrlSecurity 1.3.6.1.4.1.25972.0.5.20.4.1.1.1.8 integer read-write
Set port security. Enumeration: 'disabled': 2, 'enabled': 1.
                                       rateLimiting 1.3.6.1.4.1.25972.0.5.20.4.2
                                           rateLimitingTable 1.3.6.1.4.1.25972.0.5.20.4.2.1 no-access
Table of descriptive information and configuration about port rate limiting in this system. You can set up every port 3/4s bandwidth rate and packet limitation type.
                                               rateLimitingEntry 1.3.6.1.4.1.25972.0.5.20.4.2.1.1 no-access
An entry in the table, containing information about port rate limiting.
                                                   rateLimitingPortNum 1.3.6.1.4.1.25972.0.5.20.4.2.1.1.1 integer32 read-only
Port number.
                                                   rateLimitingPortType 1.3.6.1.4.1.25972.0.5.20.4.2.1.1.2 integer read-write
Limit Packet type: select the packet type that want to filter. The packet types have all type packet, broadcast/multicast/ unknown unicast packet, broadcast/multicast packet, and broadcast packet only. The broadcast/multicast/unknown unicast packet, broadcast/multicast packet, and broadcast packet only are only for ingress packet. The egress rate only supports all type packets. Enumeration: 'all': 1, 'broadcastonly': 4, 'broadcast-multicast-floodedunicast': 2, 'broadcast-multicast': 3.
                                                   rateLimitingIngressRate 1.3.6.1.4.1.25972.0.5.20.4.2.1.1.3 integer32 read-write
Ingress rate, the rate range is from 64 kbps to 102400 kbps (or 250000 kbps for giga ports), and zero means no limit.
                                                   rateLimitingEgressRate 1.3.6.1.4.1.25972.0.5.20.4.2.1.1.4 integer32 read-write
Egress rate, the rate range is from 64 kbps to 102400 kbps (or 250000 kbps for giga ports), and zero means no limit.
                                       portTrunk 1.3.6.1.4.1.25972.0.5.20.4.3
                                           aggregatorSetting 1.3.6.1.4.1.25972.0.5.20.4.3.1
                                               portTrunkSysPri 1.3.6.1.4.1.25972.0.5.20.4.3.1.1 integer32 read-write
The system priority of trunking.
                                               portTrunkAggregatorTable 1.3.6.1.4.1.25972.0.5.20.4.3.1.2 no-access
Table of descriptive information and configuration about of each trunk group in this system. Link aggregation lets you group up to switch-port-num consecutive ports into a single dedicated connection. This feature can expand bandwidth to a device on the network, such as another switch or a server.
                                                   portTrunkAggregatorEntry 1.3.6.1.4.1.25972.0.5.20.4.3.1.2.1 no-access
An entry in the table, containing information about aggregator setting of the trunk.
                                                       portTrunkAggregatorIndex 1.3.6.1.4.1.25972.0.5.20.4.3.1.2.1.1 integer32 read-only
Index of trunk aggregator table.
                                                       portTrunkAggregatorGroupName 1.3.6.1.4.1.25972.0.5.20.4.3.1.2.1.2 displaystring read-only
The name of trunk group.
                                                       portTrunkAggregatorMemberPorts 1.3.6.1.4.1.25972.0.5.20.4.3.1.2.1.3 portlist read-write
The members of trunk group.
                                                       portTrunkAggregatorLACPStatus 1.3.6.1.4.1.25972.0.5.20.4.3.1.2.1.4 integer read-write
The LACP function of trunking. (1) LACP is enabled for the group. (2) LACP is disabled for the group. Enumeration: 'disabled': 2, 'enabled': 1.
                                                       portTrunkAggregatorWorkPorts 1.3.6.1.4.1.25972.0.5.20.4.3.1.2.1.5 integer32 read-write
The works ports of trunked group, the number of work ports should be equal to the count of members in static trunking(ie. LACP is disabled), and should not greater than the count of members in static/ dynamic trunking.
                                           aggregatorStatus 1.3.6.1.4.1.25972.0.5.20.4.3.2
                                               portTrunkAggregatorInfoTable 1.3.6.1.4.1.25972.0.5.20.4.3.2.1 no-access
Table of descriptive information about trunk group in this system.
                                                   portTrunkAggregatorInfoEntry 1.3.6.1.4.1.25972.0.5.20.4.3.2.1.1 no-access
An entry in the table, containing information about the trunk group.
                                                       portTrunkAggregatorInfoIndex 1.3.6.1.4.1.25972.0.5.20.4.3.2.1.1.1 integer32 read-only
Index of trunk information table.
                                                       portTrunkAggregatorInfoGroupName 1.3.6.1.4.1.25972.0.5.20.4.3.2.1.1.2 displaystring read-only
The name of trunk group.
                                                       portTrunkAggregatorInfoDescription 1.3.6.1.4.1.25972.0.5.20.4.3.2.1.1.3 displaystring read-only
The dscription of trunk group.
                                           stateActivity 1.3.6.1.4.1.25972.0.5.20.4.3.3
                                               portTrunkLACPStateActTable 1.3.6.1.4.1.25972.0.5.20.4.3.3.1 no-access
Table of descriptive information and configuration about of each trunk group in this system.
                                                   portTrunkLACPStateActEntry 1.3.6.1.4.1.25972.0.5.20.4.3.3.1.1 no-access
An entry in the table, containing information about LACP state activity of the trunk.
                                                       portTrunkLACPStateActPortNum 1.3.6.1.4.1.25972.0.5.20.4.3.3.1.1.1 integer32 read-only
Port number.
                                                       portTrunkLACPStateActStatus 1.3.6.1.4.1.25972.0.5.20.4.3.3.1.1.2 integer read-write
The LACP state activity of the port. (1) Active. (2) Passive. (3) LACP doesn't be enabled. Enumeration: 'active': 1, 'passtive': 2, 'disabled': 3.
                                   redundancy 1.3.6.1.4.1.25972.0.5.20.5
                                       redundantRing 1.3.6.1.4.1.25972.0.5.20.5.1
                                           redundantRingStatus 1.3.6.1.4.1.25972.0.5.20.5.1.1 integer read-write
redundantRing function status. (1) redundantRing function is enabled. (2) redundantRing function is disabled. Enumeration: 'disabled': 2, 'enabled': 1.
                                           redundantRingMasterStatus 1.3.6.1.4.1.25972.0.5.20.5.1.2 integer read-write
Ring Master function status. (1) Ring Master function is enabled. (2) Ring Master function is disabled. This item can't be modified if redundantRingStatus object is set to disabled(2) Enumeration: 'disabled': 2, 'enabled': 1.
                                           redundantRingPort1 1.3.6.1.4.1.25972.0.5.20.5.1.3 integer32 read-write
Port Id(1~8) will be working port. The system will automatically decide which port is working port and which port is backup port if the redundantRingStatus object is set to enabled(1).
                                           redundantRingPort2 1.3.6.1.4.1.25972.0.5.20.5.1.4 integer32 read-write
Port Id(1~8) will be working port. The system will automatically decide which port is working port and which port is backup port if the redundantRingStatus object is set to enabled(1).
                                           redundantRingCoupleRingStatus 1.3.6.1.4.1.25972.0.5.20.5.1.5 integer read-write
Couple Ring function status. (1) Couple Ring function is enabled. (2) Couple Ring function is disabled. This item can't be modified if redundantRingStatus object is set to disabled(2) Enumeration: 'disabled': 2, 'enabled': 1.
                                           redundantRingCouplingPort 1.3.6.1.4.1.25972.0.5.20.5.1.6 integer32 read-write
Coupling Port.
                                           redundantRingDualHomingStatus 1.3.6.1.4.1.25972.0.5.20.5.1.7 integer read-write
Couple Ring function status. (1) Dual Homing function is enabled. (2) Dual Homing function is disabled. This item can't be modified if redundantRingStatus object is set to disabled(2) Enumeration: 'disabled': 2, 'enabled': 1.
                                           redundantRingHomingPort 1.3.6.1.4.1.25972.0.5.20.5.1.8 integer32 read-write
Homing Port.
                                           redundantRingMasterHStatus 1.3.6.1.4.1.25972.0.5.20.5.1.9 integer read-only
Ring Master function hardware status. (1) Ring Master function is enabled. (2) Ring Master function is disabled. This item can't be modified if redundantRingStatus object is set to disabled(2) Enumeration: 'disabled': 2, 'enabled': 1.
                                       rstp 1.3.6.1.4.1.25972.0.5.20.5.3
                                           rstpStatus 1.3.6.1.4.1.25972.0.5.20.5.3.1 integer read-write
Enable/Disable rapid spanning tree protocol for system. Enumeration: 'enalbed': 1, 'disabled': 2.
                                           rstpPriority 1.3.6.1.4.1.25972.0.5.20.5.3.2 integer32 read-write
A value used to identify the root bridge. The bridge with the lowest value has the highest priority and is selected as the root. Enter a number 0 through 61440 in steps of 4096. If you change the value, you must restart RSTP. This item can't be modified, if rstpStatus was disabled.
                                           rstpMaxAge 1.3.6.1.4.1.25972.0.5.20.5.3.3 integer32 read-write
The number of seconds a bridge waits without receiving Spanning-Tree Protocol configuration messages before attempting a reconfiguration. Enter a number 6 through 40. Note: 2*(Forward Delay Time-1) should be greater than or equal to the Max Age. The Max Age should be greater than or equal to 2*(Hello Time + 1). This item can't be modified, if rstpStatus was disabled.
                                           rstpHelloTime 1.3.6.1.4.1.25972.0.5.20.5.3.4 integer32 read-write
The number of seconds between the transmission of Spanning-Tree Protocol configuration messages. Enter a number 1 through 10 Note: 2*(Forward Delay Time-1) should be greater than or equal to the Max Age. The Max Age should be greater than or equal to 2*(Hello Time + 1). This item can't be modified, if rstpStatus was disabled.
                                           rstpForwardDelayTime 1.3.6.1.4.1.25972.0.5.20.5.3.5 integer32 read-write
The number of seconds a port waits before changing from its Spanning-Tree Protocol learning and listening states to the forwarding state. Enter a number 4 through 30. Note:2*(Forward Delay Time-1) should be greater than or equal to the Max Age. The Max Age should be greater than or equal to 2*(Hello Time + 1). This item can't be modified, if rstpStatus was disabled.
                                           rstpPerPortCfgTable 1.3.6.1.4.1.25972.0.5.20.5.3.6 no-access
Table of descriptive information and configuration about rapid spanning tree (Per port).
                                               rstpPerPortCfgEntry 1.3.6.1.4.1.25972.0.5.20.5.3.6.1 no-access
An entry in the table, containing configuration about RSTP (Per port).
                                                   rstpPerPortCfgPortNum 1.3.6.1.4.1.25972.0.5.20.5.3.6.1.1 integer32 read-only
Port number.
                                                   rstpPerPortCfgPathCost 1.3.6.1.4.1.25972.0.5.20.5.3.6.1.2 integer32 read-write
The cost of the path to the other bridge from this transmitting bridge at the specified port. Enter a number 1 through 200000000.
                                                   rstpPerPortCfgPriority 1.3.6.1.4.1.25972.0.5.20.5.3.6.1.3 integer32 read-write
Decide which port should be blocked by priority in LAN. Enter a number 0 through 240 in steps of 16.
                                                   rstpPerPortCfgAdminP2P 1.3.6.1.4.1.25972.0.5.20.5.3.6.1.4 integer read-write
Some of the rapid state transactions that are possible within RSTP are dependent upon whether the Port concerned can only be connected to exactly one other Bridge(ie., it is served by a point-to-point LAN segment), or can be connected to two or more Bridges(i.e., it is served by a shared medium LAN segment). The adminPointToPointMAC allow the p2p status of the link to be manipulated adminitratively. Enumeration: 'false': 2, 'true': 1, 'auto': 3.
                                                   rstpPerPortCfgAdminEdge 1.3.6.1.4.1.25972.0.5.20.5.3.6.1.5 integer read-write
Present in implementations that support the identification of edge ports. All ports directly connected to end stations cannot create bridging loops in the network and can thus directly transition to forwarding, skipping the listening and learning stages. Enumeration: 'false': 2, 'true': 1.
                                                   rstpPerPortCfgAdminNonStp 1.3.6.1.4.1.25972.0.5.20.5.3.6.1.6 integer read-write
If true, this port will not participate in RSTP. Enumeration: 'false': 2, 'true': 1.
                                           rstpRootBridgeInformationTable 1.3.6.1.4.1.25972.0.5.20.5.3.7 no-access
Table of descriptive information about root bridge of rapid spanning tree in this system.
                                               rstpRootBridgeInformationEntry 1.3.6.1.4.1.25972.0.5.20.5.3.7.1 no-access
An entry in the table, containing information about root bridge information of the RSTP.
                                                   rstpRootBridgeInformationIndex 1.3.6.1.4.1.25972.0.5.20.5.3.7.1.1 integer32 no-access
Index of root bridge information table.
                                                   rstpRootBridgeInformationBridgeID 1.3.6.1.4.1.25972.0.5.20.5.3.7.1.2 displaystring read-only
Bridge ID.
                                                   rstpRootBridgeInformationRootPriority 1.3.6.1.4.1.25972.0.5.20.5.3.7.1.3 integer32 read-only
Root Priority.
                                                   rstpRootBridgeInformationRootPort 1.3.6.1.4.1.25972.0.5.20.5.3.7.1.4 displaystring read-only
Root Port.
                                                   rstpRootBridgeInformationRootPathCost 1.3.6.1.4.1.25972.0.5.20.5.3.7.1.5 integer32 read-only
Root Path Cost.
                                                   rstpRootBridgeInformationMaxAge 1.3.6.1.4.1.25972.0.5.20.5.3.7.1.6 integer32 read-only
Max Age.
                                                   rstpRootBridgeInformationHelloTime 1.3.6.1.4.1.25972.0.5.20.5.3.7.1.7 integer32 read-only
Hello Time.
                                                   rstpRootBridgeInformationForwardDelay 1.3.6.1.4.1.25972.0.5.20.5.3.7.1.8 integer32 read-only
Forward Delay Time.
                                           rstpPerPortInfoTable 1.3.6.1.4.1.25972.0.5.20.5.3.8 no-access
Table of descriptive information and configuration about rapid spanning tree (Per port).
                                               rstpPerPortInfoEntry 1.3.6.1.4.1.25972.0.5.20.5.3.8.1 no-access
An entry in the table, containing inforamtion about RSTP (Per port).
                                                   rstpPerPortInfoPortNum 1.3.6.1.4.1.25972.0.5.20.5.3.8.1.1 integer32 read-only
Port number.
                                                   rstpPerPortInfoPathCost 1.3.6.1.4.1.25972.0.5.20.5.3.8.1.2 integer32 read-only
The cost of the path to the other bridge from this transmitting bridge at the specified port. Enter a number 1 through 200000000.
                                                   rstpPerPortInfoPriority 1.3.6.1.4.1.25972.0.5.20.5.3.8.1.3 integer32 read-only
Decide which port should be blocked by priority in LAN. Enter a number 0 through 240 in steps of 16.
                                                   rstpPerPortInfoAdminP2P 1.3.6.1.4.1.25972.0.5.20.5.3.8.1.4 integer read-only
Some of the rapid state transactions that are possible within RSTP are dependent upon whether the Port concerned can only be connected to exactly one other Bridge(ie., it is served by a point-to-point LAN segment), or can be connected to two or more Bridges(i.e., it is served by a shared medium LAN segment). The adminPointToPointMAC allow the p2p status of the link to be manipulated adminitratively. Enumeration: 'auto': 1, 'false': 3, 'true': 2.
                                                   rstpPerPortInfoAdminEdge 1.3.6.1.4.1.25972.0.5.20.5.3.8.1.5 integer read-only
Present in implementations that support the identification of edge ports. All ports directly connected to end stations cannot create bridging loops in the network and can thus directly transition to forwarding, skipping the listening and learning stages. Enumeration: 'false': 2, 'true': 1.
                                                   rstpPerPortInfoStpNeighbor 1.3.6.1.4.1.25972.0.5.20.5.3.8.1.6 integer read-only
Enumeration: 'false': 2, 'true': 1.
                                                   rstpPerPortInfoState 1.3.6.1.4.1.25972.0.5.20.5.3.8.1.7 integer read-only
Enumeration: 'discarding': 5, 'unknown': 6, 'disabled': 4, 'learning': 2, 'nonStp': 1, 'forwarding': 3.
                                                   rstpPerPortInfoRole 1.3.6.1.4.1.25972.0.5.20.5.3.8.1.8 integer read-only
Enumeration: 'alternated': 4, 'backup': 5, 'designated': 3, 'disabled': 1, 'unknown': 7, 'nonStp': 6, 'root': 2.
                                   vlan 1.3.6.1.4.1.25972.0.5.20.6
                                       vlanOperationMode 1.3.6.1.4.1.25972.0.5.20.6.1 integer read-write
The operation mode of vlan. (1)IEEE802.1Q VLAN, (2)Portbased VLAN, (3)VLAN is disabled. Enumeration: 'disabled': 3, 'portbased': 2, 'ieee8021q': 1.
                                       vlanGVRP 1.3.6.1.4.1.25972.0.5.20.6.2 integer read-write
Enable GVRP Protocol. The item has no meaning, if the operation mode of vlan isn't IEEE802.1Q. Enumeration: 'disabled': 2, 'enabled': 1.
                                       vlanIEEE8021QTable 1.3.6.1.4.1.25972.0.5.20.6.3 no-access
Table of descriptive information and configuration about IEEE802.1Q group in this system. Tag-based VLANs are based on IEEE 802.1Q specifications. Traffic is forwarded to VLAN member ports based on identifying VLAN tags in data packets. You can also configure the switch to interoperate with existing tag-based VLAN networks and legacy non-tag networks.
                                           vlanIEEE8021QEntry 1.3.6.1.4.1.25972.0.5.20.6.3.1 no-access
An entry in the table, containing information and configuration of IEEE802.1Q vlan.
                                               vlanIEEE8021QIndex 1.3.6.1.4.1.25972.0.5.20.6.3.1.1 integer32 read-only
Index of IEEE802.1Q table.
                                               vlanIEEE8021QPortName 1.3.6.1.4.1.25972.0.5.20.6.3.1.2 displaystring read-only
The name of port.
                                               vlanIEEE8021QLinkType 1.3.6.1.4.1.25972.0.5.20.6.3.1.3 integer read-write
The type of port: (1)Access Link (2)Trunk Link (3)Hybrid Link Enumeration: 'hybridlink': 3, 'trunklink': 2, 'accesslink': 1.
                                               vlanIEEE8021QUntaggedVid 1.3.6.1.4.1.25972.0.5.20.6.3.1.4 integer32 read-write
The untagged vid of port. This item can't be modified, if link type is trunklink.
                                               vlanIEEE8021QTaggedVids 1.3.6.1.4.1.25972.0.5.20.6.3.1.5 displaystring read-write
The tagged vids of port. It's a descriptive statement of a list of tagged vids. Note: Every tagged vid is separated by a comma and no space-key be allowed. This item can't be modified, if link type is accesslink.
                                       vlanIEEE8021QGroupTable 1.3.6.1.4.1.25972.0.5.20.6.4 no-access
Table of descriptive information and configuration of each ieee802.1q group in this system. Tag-based VLANs are based on IEEE 802.1Q specifications. Traffic is forwarded to VLAN member ports based on identifying VLAN tags in data packets. You can also configure the switch to interoperate with existing tag-based VLAN networks and legacy non-tag networks.
                                           vlanIEEE8021QGroupEntry 1.3.6.1.4.1.25972.0.5.20.6.4.1 no-access
An entry in the table, containing information about group name of the IEEE802.1Q vlan.
                                               vlanIEEE8021QGroupVid 1.3.6.1.4.1.25972.0.5.20.6.4.1.1 integer32 read-only
Vlan ID.
                                               vlanIEEE8021QGroupName 1.3.6.1.4.1.25972.0.5.20.6.4.1.2 displaystring read-write
The group name of vlan.
                                               vlanIEEE8021QGroupStatus 1.3.6.1.4.1.25972.0.5.20.6.4.1.3 integer read-write
The status of this entry. If this object is not equal to valid(1), all associated vlan entries shall be deleted by the agent. Enumeration: 'valid': 1, 'invalid': 2.
                                       vlanPortBasedTable 1.3.6.1.4.1.25972.0.5.20.6.5 no-access
Table of descriptive information and configuration about of each port based vlan group in this system. Traffic is forwarded to the member ports of the same vlan group. By adding ports to the VLAN you have created one port-based vlan group completely
                                           vlanPortBasedEntry 1.3.6.1.4.1.25972.0.5.20.6.5.1 no-access
An entry in the table, containing information about port based vlan.
                                               vlanPortBasedIndex 1.3.6.1.4.1.25972.0.5.20.6.5.1.1 integer32 read-only
Index of port-based vlan table.
                                               vlanPortBasedGroupName 1.3.6.1.4.1.25972.0.5.20.6.5.1.2 displaystring read-only
The group name of vlan.
                                               vlanPortBasedVid 1.3.6.1.4.1.25972.0.5.20.6.5.1.3 integer32 read-only
The vid of vlan. Vid should be the value between 1 to 4094.
                                               vlanPortBasedMembers 1.3.6.1.4.1.25972.0.5.20.6.5.1.4 portlist read-only
The member mask of vlan. Note: If there were a trunking group, all of trunking members should be in the same vlan group. If some members of trunking group doesn't be included in vlan group, the SNMP agent reports error.
                                               vlanPortBasedStatus 1.3.6.1.4.1.25972.0.5.20.6.5.1.5 integer read-only
The status of this entry. If this object is not equal to valid(1), all associated vlan entries shall be deleted by the agent. Enumeration: 'undercreation': 3, 'valid': 1, 'invalid': 4, 'creatrequest': 2.
                                   snmp 1.3.6.1.4.1.25972.0.5.20.7
                                       snmpAgentMode 1.3.6.1.4.1.25972.0.5.20.7.1 integer read-write
The Agent mode of snmp agent. (1) SNMPV1/V2C Only. (2) SNMPV3. (3) SNMPV1/V2C/V3 Enumeration: 'v3': 2, 'v1-v2Conly': 1.
                                       snmpSystemName 1.3.6.1.4.1.25972.0.5.20.7.2 displaystring read-write
The system name.
                                       snmpSystemLocation 1.3.6.1.4.1.25972.0.5.20.7.3 displaystring read-write
The system location.
                                       snmpSystemContact 1.3.6.1.4.1.25972.0.5.20.7.4 displaystring read-write
The contact information of system.
                                       snmpCommunityStringTable 1.3.6.1.4.1.25972.0.5.20.7.5 no-access
Table of descriptive and information about community string of SNMP agent.
                                           snmpCommunityStringEntry 1.3.6.1.4.1.25972.0.5.20.7.5.1 no-access
An entry in the table, containing inforamtion about community string of SNMP agent.
                                               snmpCommunityStringIndex 1.3.6.1.4.1.25972.0.5.20.7.5.1.1 integer32 no-access
Index of community string.
                                               snmpCommunityStringName 1.3.6.1.4.1.25972.0.5.20.7.5.1.2 displaystring read-write
The community string of SNMP agent.
                                               snmpCommunityStringAttribute 1.3.6.1.4.1.25972.0.5.20.7.5.1.3 integer read-write
The attribute of community string. Enumeration: 'ro': 1, 'rw': 2.
                                               snmpCommunityStringStatus 1.3.6.1.4.1.25972.0.5.20.7.5.1.4 integer read-only
The status of this entry. If this object is not equal to valid(1), all associated snmp entries shall be deleted by the agent. Enumeration: 'undercreation': 3, 'valid': 1, 'invalid': 4, 'creatrequest': 2.
                                       snmpTrapServerTable 1.3.6.1.4.1.25972.0.5.20.7.6 no-access
Table of descriptive and information about trap server of SNMP agent.
                                           snmpTrapServerEntry 1.3.6.1.4.1.25972.0.5.20.7.6.1 no-access
An entry in the table, containing inforamtion about trap server of SNMP agent.
                                               snmpTrapServerIndex 1.3.6.1.4.1.25972.0.5.20.7.6.1.1 integer32 no-access
Index of trap server.
                                               snmpTrapServerIPAddr 1.3.6.1.4.1.25972.0.5.20.7.6.1.2 ipaddress read-write
Trap Server IP Address.
                                               snmpTrapServerTrapComm 1.3.6.1.4.1.25972.0.5.20.7.6.1.3 displaystring read-write
The community string of trap server.
                                               snmpTrapServerTrapVer 1.3.6.1.4.1.25972.0.5.20.7.6.1.4 integer read-write
The trap version. Enumeration: 'v2c': 2, 'v1': 1.
                                               snmpTrapServerStatus 1.3.6.1.4.1.25972.0.5.20.7.6.1.5 integer read-only
The status of this entry. If this object is not equal to valid(1), all associated snmp entries shall be deleted by the agent. Enumeration: 'undercreation': 3, 'valid': 1, 'invalid': 4, 'creatrequest': 2.
                                   trafficPrioritization 1.3.6.1.4.1.25972.0.5.20.8
                                       qosPolicy 1.3.6.1.4.1.25972.0.5.20.8.1 integer read-write
(1)Using the 8, 4, 2, 1 weight fair queue scheme. (2)Use the strict priority scheme. Using the 8, 4, 2, 1 weight fair queue scheme: the switch will follow 8:4:2:1 rate to process priority queue from Hi to lowest queue. For example: the system will process 8 high queue packets, 4 middle queue packets, 2 low queue packets, and the one lowest queue packets at the same time. Use the strict priority scheme: Always higher queue will be process first, except higher queue is empty. Enumeration: 'a-strict-priority-scheme': 2, 'an-8-4-2-1-weighted-fair-queuing-scheme': 1.
                                       qosPriorityType 1.3.6.1.4.1.25972.0.5.20.8.2 integer read-write
(1)Port Base (2)COS only (3)TOS only (4)COS first (5)TOS first (6)Disabled Port-base: the port priority will follow the default port priority that you have assigned - High, middle, low, or lowest. COS only: the port priority will only follow the COS priority that you have assigned. TOS only: the port priority will only follow the TOS priority that you have assigned. COS first: the port priority will follow the COS priority first, and then other priority rule. TOS first: the port priority will follow the TOS priority first, and the other priority rule. Enumeration: 'tos-only': 3, 'port-base': 1, 'disabled': 6, 'tos-first': 5, 'cos-first': 4, 'cos-only': 2.
                                       qosPortBasedPriorityTable 1.3.6.1.4.1.25972.0.5.20.8.3 no-access
Table of descriptive information and configuration about PortBased QOS.
                                           qosPortBasedPriorityEntry 1.3.6.1.4.1.25972.0.5.20.8.3.1 no-access
An entry in the table, containing inforamtion about PortBased QOS.
                                               qosPortBasedPriorityPortNum 1.3.6.1.4.1.25972.0.5.20.8.3.1.1 integer32 read-only
Port number.
                                               qosPortBasedPriority 1.3.6.1.4.1.25972.0.5.20.8.3.1.2 integer read-write
The port priority will follow the default port priority that you have assigned - (1)lowest, (2)low, (3)middle, or (4)High. Enumeration: 'lowest': 1, 'middle': 3, 'high': 4, 'low': 2.
                                       qosCOSTable 1.3.6.1.4.1.25972.0.5.20.8.4 no-access
Table of descriptive information and configuration about PortBased QOS.
                                           qosCOSEntry 1.3.6.1.4.1.25972.0.5.20.8.4.1 no-access
An entry in the table, containing inforamtion about COS QOS.
                                               qosCOSPriority 1.3.6.1.4.1.25972.0.5.20.8.4.1.1 integer32 read-only
COS priority.
                                               qosCOS 1.3.6.1.4.1.25972.0.5.20.8.4.1.2 integer read-write
The port priority will follow the COS priority that you have assigned - (1)lowest, (2)low, (3)middle, or (4)High. Enumeration: 'lowest': 1, 'middle': 3, 'high': 4, 'low': 2.
                                       qosCOSPortDefaultTable 1.3.6.1.4.1.25972.0.5.20.8.5 no-access
Table of descriptive information and configuration about PortBased QOS.
                                           qosCOSPortDefaultEntry 1.3.6.1.4.1.25972.0.5.20.8.5.1 no-access
An entry in the table, containing inforamtion about COS QOS.
                                               qosCOSPort 1.3.6.1.4.1.25972.0.5.20.8.5.1.1 integer32 read-only
COS Default Panel Port.
                                               qosCOSPortDefault 1.3.6.1.4.1.25972.0.5.20.8.5.1.2 integer32 read-write
COS Default Panel Port Priority.
                                       qosTOSTable 1.3.6.1.4.1.25972.0.5.20.8.6 no-access
Table of descriptive information and configuration about PortBased QOS.
                                           qosTOSEntry 1.3.6.1.4.1.25972.0.5.20.8.6.1 no-access
An entry in the table, containing inforamtion about TOS QOS.
                                               qosTOSPriority 1.3.6.1.4.1.25972.0.5.20.8.6.1.1 integer32 read-only
TOS priority.
                                               qosTOS 1.3.6.1.4.1.25972.0.5.20.8.6.1.2 integer read-write
The port priority will follow the TOS priority that you have assigned - (1)lowest, (2)low, (3)middle, or (4)High. Enumeration: 'lowest': 1, 'middle': 3, 'high': 4, 'low': 2.
                                   multicast 1.3.6.1.4.1.25972.0.5.20.9
                                       igmp 1.3.6.1.4.1.25972.0.5.20.9.1
                                           igmpStatus 1.3.6.1.4.1.25972.0.5.20.9.1.1 integer read-write
Parameter to enable or disable IGMP snooping on the device. When enabled, the device will examine IGMP packets and set up filters for IGMP ports. The Internet Group Management Protocol (IGMP) is an internal protocol of the Internet Protocol (IP) suite. IP manages multicast traffic by using switches, routers, and hosts that support IGMP. Enabling IGMP allows the ports to detect IGMP queries and report packets and manage IP multicast traffic through the switch. IGMP have three fundamental types of message as follows: Message Description -------------------------------------------------------------- Query A message sent from the querier (IGMP router or switch) asking for a response from each host belonging to the multicast group. Report A message sent by a host to the querier to indicate that the host wants to be or is a member of a given group indicated in the report message. Leave Group A message sent by a host to the querier to indicate that the host has quit to be a member of a specific multicast group. You can enable IGMP protocol and IGMP Query function. You will see the IGMP snooping information in this section -- difference multicast group VID and member port, and IP multicast addresses range from 224.0.0.0 through 239.255.255.255. Enumeration: 'igmpv3': 2, 'igmpv2': 1, 'disabled': 3.
                                           igmpQuery 1.3.6.1.4.1.25972.0.5.20.9.1.2 integer read-write
(1)Detect querier automatically. (2)Force to be a querier. (3)Be a silence snooper. The mode of querier. Enumeration: 'disabled': 3, 'auto': 1, 'enabled': 2.
                                           igmpEntriesTable 1.3.6.1.4.1.25972.0.5.20.9.1.3 no-access
Table of descriptive information about IGMP entries.
                                               igmpEntriesEntry 1.3.6.1.4.1.25972.0.5.20.9.1.3.1 no-access
An entry in the table, containing inforamtion about IGMP.
                                                   igmpEntriesEntryIndex 1.3.6.1.4.1.25972.0.5.20.9.1.3.1.1 integer32 read-only
Index of IGMP table.
                                                   igmpEntriesEntryIPAddr 1.3.6.1.4.1.25972.0.5.20.9.1.3.1.2 ipaddress read-only
The IP address of an IGMP entry.
                                                   igmpEntriesEntryVID 1.3.6.1.4.1.25972.0.5.20.9.1.3.1.3 integer32 read-only
The VLAN ID of an IGMP entry.
                                                   igmpEntriesEntryMembers 1.3.6.1.4.1.25972.0.5.20.9.1.3.1.4 portlist read-only
The member ports mask of IGMP entry.
                                       multicastfiltering 1.3.6.1.4.1.25972.0.5.20.9.3
                                           multicastfilteringEntriesTable 1.3.6.1.4.1.25972.0.5.20.9.3.1 no-access
Table of descriptive information about multicast filtering entries.
                                               multicastfilteringEntriesEntry 1.3.6.1.4.1.25972.0.5.20.9.3.1.1 no-access
An entry in the table, containing inforamtion about multicast filtering entries.
                                                   multicastFilteringIndex 1.3.6.1.4.1.25972.0.5.20.9.3.1.1.1 integer32 no-access
This object identifies the switch within the system for which this entry contains information.
                                                   multicastFilteringAddr 1.3.6.1.4.1.25972.0.5.20.9.3.1.1.2 ipaddress read-write
Group IP Address.
                                                   multicastFilteringMemberports 1.3.6.1.4.1.25972.0.5.20.9.3.1.1.3 portlist read-only
The member mask of group.
                                                   multicastFilteringStatus 1.3.6.1.4.1.25972.0.5.20.9.3.1.1.4 integer read-only
The status of this entry. If this object is not equal to valid(1), all associated vlan entries shall be deleted by the agent. Enumeration: 'undercreation': 3, 'valid': 1, 'invalid': 4, 'creatrequest': 2.
                                   security 1.3.6.1.4.1.25972.0.5.20.10
                                         ipSecurityMgt 1.3.6.1.4.1.25972.0.5.20.10.1
                                             ipSecurityStatus 1.3.6.1.4.1.25972.0.5.20.10.1.1 integer read-write
IP Security function status. (1) IP Security function is enabled. (2) IP Security function is disabled. Enumeration: 'disabled': 2, 'enabled': 1.
                                             ipSecurityHTTPServerStatus 1.3.6.1.4.1.25972.0.5.20.10.1.2 integer read-write
IP Security function status. (1) IP Security of HTTP server function is enabled. (2) IP Security of HTTP server function is disabled. Enumeration: 'disabled': 2, 'enabled': 1.
                                             ipSecurityTelnetServerStatus 1.3.6.1.4.1.25972.0.5.20.10.1.3 integer read-write
IP Security function status. (1) IP Security of telnet server function is enabled. (2) IP Security of telnet server function is disabled. Enumeration: 'disabled': 2, 'enabled': 1.
                                             ipSecuritySNMPServerStatus 1.3.6.1.4.1.25972.0.5.20.10.1.4 integer read-write
IP Security function status. (1) IP Security of SNMP server function is enabled. (2) IP Security of SNMP server function is disabled. Enumeration: 'disabled': 2, 'enabled': 1.
                                             ipSecuritySecurityIP1 1.3.6.1.4.1.25972.0.5.20.10.1.5 ipaddress read-write
This IP address can access and manage the switch through the Web browser.
                                             ipSecuritySecurityIP2 1.3.6.1.4.1.25972.0.5.20.10.1.6 ipaddress read-write
This IP address can access and manage the switch through the Web browser.
                                             ipSecuritySecurityIP3 1.3.6.1.4.1.25972.0.5.20.10.1.7 ipaddress read-write
This IP address can access and manage the switch through the Web browser.
                                             ipSecuritySecurityIP4 1.3.6.1.4.1.25972.0.5.20.10.1.8 ipaddress read-write
This IP address can access and manage the switch through the Web browser.
                                             ipSecuritySecurityIP5 1.3.6.1.4.1.25972.0.5.20.10.1.9 ipaddress read-write
This IP address can access and manage the switch through the Web browser.
                                             ipSecuritySecurityIP6 1.3.6.1.4.1.25972.0.5.20.10.1.10 ipaddress read-write
This IP address can access and manage the switch through the Web browser.
                                             ipSecuritySecurityIP7 1.3.6.1.4.1.25972.0.5.20.10.1.11 ipaddress read-write
This IP address can access and manage the switch through the Web browser.
                                             ipSecuritySecurityIP8 1.3.6.1.4.1.25972.0.5.20.10.1.12 ipaddress read-write
This IP address can access and manage the switch through the Web browser.
                                             ipSecuritySecurityIP9 1.3.6.1.4.1.25972.0.5.20.10.1.13 ipaddress read-write
This IP address can access and manage the switch through the Web browser.
                                             ipSecuritySecurityIP10 1.3.6.1.4.1.25972.0.5.20.10.1.14 ipaddress read-write
This IP address can access and manage the switch through the Web browser.
                                         portSecurityMgt 1.3.6.1.4.1.25972.0.5.20.10.2
                                             portSecurityTable 1.3.6.1.4.1.25972.0.5.20.10.2.1 no-access
Table of descriptive information about static MAC per port configuration. When you add a static MAC address, it remains in the switch's address table, regardless of whether the device is physically connected to the switch. This saves the switch from having to re-learn a device's MAC address when the disconnected or powered-off device is active on the network again.
                                                 portSecurityEntry 1.3.6.1.4.1.25972.0.5.20.10.2.1.1 no-access
An entry in the table, containing inforamtion about static MAC per port configuration.
                                                     portSecurityIndex 1.3.6.1.4.1.25972.0.5.20.10.2.1.1.1 integer32 no-access
Index of MAC.
                                                     portSecurityPortName 1.3.6.1.4.1.25972.0.5.20.10.2.1.1.2 displaystring read-write
The port name, if you want to insert a new MAC entry, the port name must be correct (Please refer to the switchCurrentPortNameListTable) when creating a new entry.
                                                     portSecurityAddr 1.3.6.1.4.1.25972.0.5.20.10.2.1.1.3 macaddress read-write
MAC address of the entry.
                                                     portSecurityStatus 1.3.6.1.4.1.25972.0.5.20.10.2.1.1.4 integer read-only
The status of this entry. If this object is not equal to valid(1), all associated MAC entries shall be deleted by the agent. Enumeration: 'undercreation': 3, 'valid': 1, 'invalid': 4, 'creatrequest': 2.
                                         macBlacklist 1.3.6.1.4.1.25972.0.5.20.10.3
                                             macBlacklistTable 1.3.6.1.4.1.25972.0.5.20.10.3.1 no-access
Table of descriptive information about MAC filter configuration. MAC address filtering allows the switch to drop unwanted traffic. Traffic is filtered based on the destination addresses. For example, if your network is congested because of high utilization from one MAC address, you can filter all traffic transmitted to that MAC address, restoring network flow while you troubleshoot the problem.
                                                 macBlacklistEntry 1.3.6.1.4.1.25972.0.5.20.10.3.1.1 no-access
An entry in the table, containing inforamtion about MAC filter configuration.
                                                     macBlacklistIndex 1.3.6.1.4.1.25972.0.5.20.10.3.1.1.1 integer32 no-access
Index of MAC.
                                                     macBlacklistAddr 1.3.6.1.4.1.25972.0.5.20.10.3.1.1.2 macaddress read-write
MAC address of the entry.
                                                     macBlacklistStatus 1.3.6.1.4.1.25972.0.5.20.10.3.1.1.3 integer read-only
The status of this entry. If this object is not equal to valid(1), all associated MAC entries shall be deleted by the agent. Enumeration: 'undercreation': 3, 'valid': 1, 'invalid': 4, 'creatrequest': 2.
                                         ieee8021x 1.3.6.1.4.1.25972.0.5.20.10.4
                                             radiusServerSetting 1.3.6.1.4.1.25972.0.5.20.10.4.1
                                                 radius8021xProtocolStatus 1.3.6.1.4.1.25972.0.5.20.10.4.1.1 integer read-write
IEEE802.1x protocol function status. (1) IEEE802.1x protocol function is enabled. (2) IEEE802.1x protocol function is disabled. 802.1x makes use of the physical access characteristics of IEEE802 LAN infrastructures in order to provide a means of authenticating and authorizing devices attached to a LAN port that has point-to-point connection characteristics, and of preventing access to that port in cases in which the authentication and authorization process fails. Enumeration: 'disabled': 2, 'enabled': 1.
                                                 radiusServerIP 1.3.6.1.4.1.25972.0.5.20.10.4.1.2 ipaddress read-write
Radius Server IP Address: the ip address of the authentication server.
                                                 radiusServerPort 1.3.6.1.4.1.25972.0.5.20.10.4.1.3 integer32 read-write
Server Port: The UDP port number used by the authentication server to authenticate.
                                                 radiusAccountingPort 1.3.6.1.4.1.25972.0.5.20.10.4.1.4 integer32 read-write
Accounting Port: The UDP port number used by the authentication server to retrieve accounting information.
                                                 radiusSharedKey 1.3.6.1.4.1.25972.0.5.20.10.4.1.5 displaystring read-write
Shared Key: A key shared between this switch and authentication server.
                                                 radiusNASIdentifier 1.3.6.1.4.1.25972.0.5.20.10.4.1.6 displaystring read-write
NAS Identifier: A string used to identify this switch.
                                                 radiusMiscQuietPeriod 1.3.6.1.4.1.25972.0.5.20.10.4.1.7 integer32 read-write
Quiet Period: used to define periods of time during which it will not attempt to acquire a supplicant (Default time is 60 seconds).
                                                 radiusMiscTxPeriod 1.3.6.1.4.1.25972.0.5.20.10.4.1.8 integer32 read-write
Tx Period: used to determine when an EAPOL PDU is to be transmitted(Default value is 30 seconds).
                                                 radiusMiscSupplicantTimeout 1.3.6.1.4.1.25972.0.5.20.10.4.1.9 integer32 read-write
Supplicant Timeout: used to determine timeout conditions in the exchanges between the supplicant and authentication server(Default value is 30 seconds).
                                                 radiusMiscServerTimeout 1.3.6.1.4.1.25972.0.5.20.10.4.1.10 integer32 read-write
Server Timeout: used to determine timeout conditions in the exchanges between the authenticator and authentication server(Default value is 30 seconds).
                                                 radiusMiscReAuthMax 1.3.6.1.4.1.25972.0.5.20.10.4.1.11 integer32 read-write
ReAuthMax: used to determine the number of reauthentication attempts that are permitted before the specific port becomes unauthorized (Default value is 2 times).
                                                 radiusMiscReauthPeriod 1.3.6.1.4.1.25972.0.5.20.10.4.1.12 integer32 read-write
Reauth Period: used to determine a nonzero number of seconds between periodic reauthentication of the supplications(Default value is 3600 seconds).
                                             portAuthConfiguration 1.3.6.1.4.1.25972.0.5.20.10.4.2
                                                 radiusPerPortCfgTable 1.3.6.1.4.1.25972.0.5.20.10.4.2.1 no-access
Table of descriptive information and configuration about Radius per port configuration.
                                                     radiusPerPortCfgEntry 1.3.6.1.4.1.25972.0.5.20.10.4.2.1.1 no-access
An entry in the table, containing inforamtion about Radius per port configuration.
                                                         radiusPerPortCfgIndex 1.3.6.1.4.1.25972.0.5.20.10.4.2.1.1.1 integer32 no-access
Index of port.
                                                         radiusPerPortCfgPortName 1.3.6.1.4.1.25972.0.5.20.10.4.2.1.1.2 displaystring read-only
The name of port.
                                                         radiusPerPortCfgState 1.3.6.1.4.1.25972.0.5.20.10.4.2.1.1.3 integer read-write
You can select the specific port and configure the authorization state. Each port can select four kinds of authorization state : Reject: force the specific port to be unauthorized. Accept: force the specific port to be authorized. Authorize: the state of the specific port was determinied by the outcome of the authentication. Disable: the specific port didn't support 802.1x function. Enumeration: 'authorize': 3, 'disabled': 4, 'accept': 2, 'reject': 1.
                                   warning 1.3.6.1.4.1.25972.0.5.20.11
                                         faultAlarm 1.3.6.1.4.1.25972.0.5.20.11.1
                                             faultAlarmPwr1 1.3.6.1.4.1.25972.0.5.20.11.1.1 integer read-write
State of Power1 failure alarm. Enumeration: 'disabled': 2, 'enabled': 1.
                                             faultAlarmPwr2 1.3.6.1.4.1.25972.0.5.20.11.1.2 integer read-write
State of Power1 failure alarm. Enumeration: 'disabled': 2, 'enabled': 1.
                                             faultAlarmPortCfgTable 1.3.6.1.4.1.25972.0.5.20.11.1.3 no-access
Table of descriptive information and configuration about fault alarm per port configuration.
                                                 faultAlarmPortCfgEntry 1.3.6.1.4.1.25972.0.5.20.11.1.3.1 no-access
An entry in the table, containing inforamtion about falut alarm per port configuration.
                                                     faultAlarmPortCfgNum 1.3.6.1.4.1.25972.0.5.20.11.1.3.1.1 integer32 read-only
Index of port.
                                                     faultAlarmPortLinkStatus 1.3.6.1.4.1.25972.0.5.20.11.1.3.1.2 integer read-write
State of Port Link Down/Broken failure alarm. Enumeration: 'disabled': 2, 'enabled': 1.
                                         sysLogConfiguration 1.3.6.1.4.1.25972.0.5.20.11.2
                                             syslogStatus 1.3.6.1.4.1.25972.0.5.20.11.2.1 integer read-write
Parameter to specify the log should be sent to syslog server, or the log should be kept in switch. When disabled, the switch won't send out or record any log. Enumeration: 'disabled': 4, 'clientOnly': 1, 'serverOnly': 2, 'bothClientAndServer': 3.
                                             eventServerAddr 1.3.6.1.4.1.25972.0.5.20.11.2.2 ipaddress read-write
The IP address of syslog server. It can't be modified when syslogStatus is disabled.
                                         smtpConfiguration 1.3.6.1.4.1.25972.0.5.20.11.3
                                             eventEmailAlertStatus 1.3.6.1.4.1.25972.0.5.20.11.3.1 integer read-write
Parameter to enable the Email alert feature, When enabled, the switch will send the mail to the address presented in emailAlertRcptTable. Enumeration: 'disabled': 2, 'enabled': 1.
                                             eventEmailAlertAddr 1.3.6.1.4.1.25972.0.5.20.11.3.2 displaystring read-write
The IP address of SMTP server. It can't be modified when eventEmailAlertStatus is disabled.
                                             eventEmailAlertAuthentication 1.3.6.1.4.1.25972.0.5.20.11.3.3 integer read-write
Parameter to enable the authentication feature SMTP server. It can't be modified when eventEmailAlertStatus is disabled. Enumeration: 'disabled': 2, 'enabled': 1.
                                             eventEmailAlertAccount 1.3.6.1.4.1.25972.0.5.20.11.3.4 displaystring read-write
The Email account for SMTP server. It can't be modified when eventEmailAlertAuthentication is disabled.
                                             eventEmailAlertPassword 1.3.6.1.4.1.25972.0.5.20.11.3.5 displaystring read-write
The password of Email account. It can't be modified when eventEmailAlertAuthentication is disabled.
                                             emailAlertRcptTable 1.3.6.1.4.1.25972.0.5.20.11.3.6 no-access
Table of descriptive information of recipient Email address list.
                                                 emailAlertRcptEntry 1.3.6.1.4.1.25972.0.5.20.11.3.6.1 no-access
An entry in the table, containing recipient Email addresses.
                                                     eventEmailAlertRcptIndex 1.3.6.1.4.1.25972.0.5.20.11.3.6.1.1 integer32 read-only
Index of recipient Email address.
                                                     eventEmailAlertRcptEmailAddr 1.3.6.1.4.1.25972.0.5.20.11.3.6.1.2 displaystring read-write
The recipient Email address.
                                         eventSelection 1.3.6.1.4.1.25972.0.5.20.11.4
                                             systemEventsTable 1.3.6.1.4.1.25972.0.5.20.11.4.1 no-access
Table of descriptive information about system events.
                                                 systemEventsEntry 1.3.6.1.4.1.25972.0.5.20.11.4.1.1 read-only
An entry in the table, containing type of system events.
                                                     eventSystemEventsIndex 1.3.6.1.4.1.25972.0.5.20.11.4.1.1.1 integer32 no-access
Index of events.
                                                     eventDeviceRestartEvent 1.3.6.1.4.1.25972.0.5.20.11.4.1.1.2 integer read-write
Parameter to indicate the event should be logged or should be sent as an Email alert. The value can't be log(1) or logandsmtp(3), if syslogStatus is disabled. The value can't be smtp(2) or logandsmtp(3), if eventEmailAlertStatus is disabled. Enumeration: 'disabled': 4, 'logandsmtp': 3, 'smtp': 2, 'log': 1.
                                                     eventPowerStatusEvent 1.3.6.1.4.1.25972.0.5.20.11.4.1.1.3 integer read-write
Parameter to indicate the event should be logged or should be sent as an Email alert. The value can't be log(1) or logandsmtp(3), if syslogStatus is disabled. The value can't be smtp(2) or logandsmtp(3), if eventEmailAlertStatus is disabled. Enumeration: 'disabled': 4, 'logandsmtp': 3, 'smtp': 2, 'log': 1.
                                                     eventAuthenticationFailureEvent 1.3.6.1.4.1.25972.0.5.20.11.4.1.1.4 integer read-write
Parameter to indicate the event should be logged or should be sent as an Email alert. The value can't be log(1) or logandsmtp(3), if syslogStatus is disabled. The value can't be smtp(2) or logandsmtp(3), if eventEmailAlertStatus is disabled. Enumeration: 'disabled': 4, 'logandsmtp': 3, 'smtp': 2, 'log': 1.
                                                     eventRingTopologyChangeEvent 1.3.6.1.4.1.25972.0.5.20.11.4.1.1.5 integer read-write
Parameter to indicate the event should be logged or should be sent as an Email alert. The value can't be log(1) or logandsmtp(3), if syslogStatus is disabled. The value can't be smtp(2) or logandsmtp(3), if eventEmailAlertStatus is disabled. Enumeration: 'disabled': 4, 'logandsmtp': 3, 'smtp': 2, 'log': 1.
                                             portEventsTable 1.3.6.1.4.1.25972.0.5.20.11.4.2 no-access
Table of descriptive information about port events.
                                                 portEventsEntry 1.3.6.1.4.1.25972.0.5.20.11.4.2.1 no-access
An entry in the table, containing type of port events.
                                                     eventPortNumber 1.3.6.1.4.1.25972.0.5.20.11.4.2.1.1 integer32 read-only
Port number for port event table.
                                                     eventPortEventLog 1.3.6.1.4.1.25972.0.5.20.11.4.2.1.2 integer read-write
Parameter to indicate the which event should be logged. The value can't be modified, if syslogStatus is disabled. Enumeration: 'disabled': 4, 'linkup': 1, 'linkupandlinkdown': 3, 'linkdown': 2.
                                                     eventPortEventSMTP 1.3.6.1.4.1.25972.0.5.20.11.4.2.1.3 integer read-write
Parameter to indicate the which event should be an Email alert. The value can't be modified, if eventEmailAlertStatus is disabled. Enumeration: 'disabled': 4, 'linkup': 1, 'linkupandlinkdown': 3, 'linkdown': 2.
                                   monitorAndDiag 1.3.6.1.4.1.25972.0.5.20.12
                                         macAddressTable 1.3.6.1.4.1.25972.0.5.20.12.1
                                             agingTimeSetting 1.3.6.1.4.1.25972.0.5.20.12.1.1 integer32 read-write
The MAC address table flush time.
                                             flushMACStatus 1.3.6.1.4.1.25972.0.5.20.12.1.2 integer read-write
(1)Enable Flush MAC address table when ports link down. (2)Disable Flush MAC address table when ports link down. Enumeration: 'disabled': 2, 'enabled': 1.
                                             macAddrTable 1.3.6.1.4.1.25972.0.5.20.12.1.3 no-access
Table of descriptive information about MAC filter configuration.
                                                 macAddrEntry 1.3.6.1.4.1.25972.0.5.20.12.1.3.1 no-access
An entry in the table, containing inforamtion about all MAC configuration.
                                                     macAddressAddr 1.3.6.1.4.1.25972.0.5.20.12.1.3.1.1 macaddress read-only
MAC address of the entry.
                                                     macAddressPortName 1.3.6.1.4.1.25972.0.5.20.12.1.3.1.2 displaystring read-only
The port name, if you want to insert a new MAC entry, the port name must be correct (Please refer to the switchCurrentPortNameListTable) when creating a new entry.
                                                     macAddressType 1.3.6.1.4.1.25972.0.5.20.12.1.3.1.3 integer read-only
The type of this entry. Enumeration: 'static': 2, 'dynamic': 1.
                                             portSecurityClearMACTable 1.3.6.1.4.1.25972.0.5.20.12.1.4 integer read-write
Set to active for cleaning all the MAC entries in MAC table. Enumeration: 'active': 1, 'notActive': 2.
                                         portStatistic 1.3.6.1.4.1.25972.0.5.20.12.2
                                             switchPortStatTable 1.3.6.1.4.1.25972.0.5.20.12.2.1 no-access
Table of descriptive and statistics information about each switch ports(including expansion slot).
                                                 switchPortStatEntry 1.3.6.1.4.1.25972.0.5.20.12.2.1.1 no-access
An entry in the table, containing information about statistics in one switch port of the switch.
                                                     swPortStatIndex 1.3.6.1.4.1.25972.0.5.20.12.2.1.1.1 integer32 no-access
Index of port statistic table.
                                                     swPortStatType 1.3.6.1.4.1.25972.0.5.20.12.2.1.1.2 displaystring read-only
Indicates the port type.
                                                     swPortStatLink 1.3.6.1.4.1.25972.0.5.20.12.2.1.1.3 integer read-only
Indicates the link state. Enumeration: 'down': 2, 'up': 1.
                                                     swPortStatState 1.3.6.1.4.1.25972.0.5.20.12.2.1.1.4 integer read-only
Indicates the port state Enumeration: 'disabled': 2, 'enabled': 1.
                                                     swPortStatTXGoodPkt 1.3.6.1.4.1.25972.0.5.20.12.2.1.1.5 integer32 read-only
The count of good packets of TX.
                                                     swPortStatTXBadPkt 1.3.6.1.4.1.25972.0.5.20.12.2.1.1.6 integer32 read-only
The count of bad packets of TX.
                                                     swPortStatRXGoodPkt 1.3.6.1.4.1.25972.0.5.20.12.2.1.1.7 integer32 read-only
The count of good packets of RX.
                                                     swPortStatRXBadPkt 1.3.6.1.4.1.25972.0.5.20.12.2.1.1.8 integer32 read-only
The count of bad packets of RX.
                                                     swPortStatTXAbortPkt 1.3.6.1.4.1.25972.0.5.20.12.2.1.1.9 integer32 read-only
The count of abort packets of TX.
                                                     swPortStatPacketCollision 1.3.6.1.4.1.25972.0.5.20.12.2.1.1.10 integer32 read-only
The count of collision.
                                         portmirroring 1.3.6.1.4.1.25972.0.5.20.12.3
                                             swPortMirrorDestinationPortTX 1.3.6.1.4.1.25972.0.5.20.12.3.1 integer32 read-write
The TX destination port (sniffer port). Destination port can be used to see all monitor port traffic. You can connect sniffer port to lan analysier or netxray.
                                             swPortMirrorDestinationPortRX 1.3.6.1.4.1.25972.0.5.20.12.3.2 integer32 read-write
The RX destination port (sniffer port). Destination port can be used to see all monitor port traffic. You can connect sniffer port to lan analysier or netxray.
                                             switchPortMirrorSourceTable 1.3.6.1.4.1.25972.0.5.20.12.3.3 no-access
Table of descriptive information and configuration of port mirror in this system. The Port Sniffer is a method for monitor traffic in switched networks. Use this tabe to select monitor port for this switch.
                                                 switchPortMirrorSourceEntry 1.3.6.1.4.1.25972.0.5.20.12.3.3.1 no-access
An entry in the table, containing information about port mirror.
                                                     swPortMirrorPortNum 1.3.6.1.4.1.25972.0.5.20.12.3.3.1.1 integer32 read-only
Port number.
                                                     swPortMirrorSourcePort 1.3.6.1.4.1.25972.0.5.20.12.3.3.1.2 integer read-write
The mode of source port (monitor port). (1) TX only. (2) RX only. (3) RX and TX. (4) Source port is disabled. The ports you want to monitor. All source port traffic will be copied to destination port (sniffer port). Enumeration: 'disabled': 4, 'rxonly': 2, 'txonly': 1, 'rxandtx': 3.
                                         eventLog 1.3.6.1.4.1.25972.0.5.20.12.4
                                             eventLogTable 1.3.6.1.4.1.25972.0.5.20.12.4.1 no-access
Table of descriptive information about logs.
                                                 eventLogEntry 1.3.6.1.4.1.25972.0.5.20.12.4.1.1 no-access
An entry in the table, containing list of logs.
                                                     eventLogIndex 1.3.6.1.4.1.25972.0.5.20.12.4.1.1.1 integer32 read-only
Index of log.
                                                     eventLogDescription 1.3.6.1.4.1.25972.0.5.20.12.4.1.1.2 displaystring read-only
The description of log.
                                   saveConfiguration 1.3.6.1.4.1.25972.0.5.20.13
                                         saveCfgMgtAction 1.3.6.1.4.1.25972.0.5.20.13.1 integer read-write
Setting this object to active(1) triger saving current configuration. Setting this object to notActive(2) has no effect. The system always returns the value notActive(2) when this object is read. Enumeration: 'active': 1, 'notActive': 2.
                                   factoryDefault 1.3.6.1.4.1.25972.0.5.20.14
                                         factoryDefaultAction 1.3.6.1.4.1.25972.0.5.20.14.1 integer read-write
Setting this object to keep-ip-and-username-password(1), keep-ip(2), keep-username-password(3) , and keep-nothing(4), triger loading facotory default configuration. Setting this object to notActive(5) has no effect. The system always returns the value notActive(5) when this object is read. Enumeration: 'keep-ip': 2, 'keep-username-password': 3, 'keep-ip-and-username-password': 1, 'notActive': 5, 'keep-nothing': 4.
                                   systemReboot 1.3.6.1.4.1.25972.0.5.20.15
                                         systemRebootAction 1.3.6.1.4.1.25972.0.5.20.15.1 integer read-write
Setting this object to active(1) triger the system restart. Setting this object to notActive(2) has no effect. The system always returns the value notActive(2) when this object is read. Enumeration: 'active': 1, 'notActive': 2.
                                   misc 1.3.6.1.4.1.25972.0.5.20.24
                                         specificTrap 1.3.6.1.4.1.25972.0.5.20.24.1
                                             trapPowerStatus 1.3.6.1.4.1.25972.0.5.20.24.1.1 integer read-only
Indicates the switch power status Enumeration: 'power1On-power2On': 1, 'power1On-power2Off': 2, 'power1Off-power2On': 3, 'power1Off-power2Off': 4.
                                             trapTopologyChange 1.3.6.1.4.1.25972.0.5.20.24.1.2 integer32 read-only
redundantRing topology change counter.
                                         switchCurrentPortNameListTable 1.3.6.1.4.1.25972.0.5.20.24.2 no-access
Table of descriptive and status information about the logical ports in this system.
                                             switchCurrentPortNameListEntry 1.3.6.1.4.1.25972.0.5.20.24.2.1 no-access
An entry in the table, containing information about logical port name in this system.
                                                 swCurrentPortNameListIndex 1.3.6.1.4.1.25972.0.5.20.24.2.1.1 integer32 no-access
Index of logical port.
                                                 swCurrentPortNameListPortName 1.3.6.1.4.1.25972.0.5.20.24.2.1.2 displaystring read-only
The name of logical port.
                                                 swCurrentPortNameListPortNumber 1.3.6.1.4.1.25972.0.5.20.24.2.1.3 displaystring read-only
The port number(s) that port name belong to. If the logical port stood for a trunk group, this object shows the members of trunk group.
                                   powerOverEthernet 1.3.6.1.4.1.25972.0.5.20.25
                                         poeSystemSetting 1.3.6.1.4.1.25972.0.5.20.25.1
                                             poeMaximumPowerAvailable 1.3.6.1.4.1.25972.0.5.20.25.1.1 integer32 read-write
                                             poeActualPowerConsumption 1.3.6.1.4.1.25972.0.5.20.25.1.2 integer32 read-only
                                             poePortKnockoffDisabled 1.3.6.1.4.1.25972.0.5.20.25.1.3 integer read-write
Port Knockoff Disabled Enumeration: 'disabled': 2, 'enabled': 1.
                                             poeACDisconnect 1.3.6.1.4.1.25972.0.5.20.25.1.4 integer read-write
AC Disconnect Enumeration: 'disabled': 2, 'enabled': 1.
                                             poeCapacitiveDetection 1.3.6.1.4.1.25972.0.5.20.25.1.5 integer read-write
Capacitive Detection Enumeration: 'disabled': 2, 'enabled': 1.
                                         poePortStatus 1.3.6.1.4.1.25972.0.5.20.25.2
                                             poePortStatusTable 1.3.6.1.4.1.25972.0.5.20.25.2.1 no-access
                                                 poePortStatusEntry 1.3.6.1.4.1.25972.0.5.20.25.2.1.1 no-access
                                                     poePortStatusIndex 1.3.6.1.4.1.25972.0.5.20.25.2.1.1.1 integer32 read-only
This object identifies the switch within the system for which this entry contains information. This value can never be greater than switchNumber.
                                                     poePortStatusLink 1.3.6.1.4.1.25972.0.5.20.25.2.1.1.2 integer read-only
Enumeration: 'linkup': 1, 'linkdown': 2.
                                                     poePortStatusState 1.3.6.1.4.1.25972.0.5.20.25.2.1.1.3 integer read-only
Enumeration: 'not-available': 10, 'power-managed': 5, 'underload': 7, 'overload': 8, 'disabled': 1, 'inactive': 4, 'error': 9, 'invalid-pd': 6, 'detecting': 2, 'power-ieee': 3.
                                                     poePortStatusCurrent 1.3.6.1.4.1.25972.0.5.20.25.2.1.1.4 integer32 read-only
Current(mA)
                                                     poePortStatusVoltage 1.3.6.1.4.1.25972.0.5.20.25.2.1.1.5 displaystring read-only
Voltage(V)
                                                     poePortStatusPower 1.3.6.1.4.1.25972.0.5.20.25.2.1.1.6 integer32 read-only
Power(mW)
                                                     poePortStatusDeterminedClass 1.3.6.1.4.1.25972.0.5.20.25.2.1.1.7 displaystring read-only
                                         poePortControl 1.3.6.1.4.1.25972.0.5.20.25.3
                                             poePortControlTable 1.3.6.1.4.1.25972.0.5.20.25.3.1 no-access
                                                 poePortControlEntry 1.3.6.1.4.1.25972.0.5.20.25.3.1.1 no-access
                                                     poePortControlIndex 1.3.6.1.4.1.25972.0.5.20.25.3.1.1.1 integer32 read-only
This object identifies the switch within the system for which this entry contains information. This value can never be greater than switchNumber.
                                                     poePortControlState 1.3.6.1.4.1.25972.0.5.20.25.3.1.1.2 integer read-write
State Enumeration: 'enable': 1, 'disable': 2.
                                                     poePortControlPowerLimitFromClassification 1.3.6.1.4.1.25972.0.5.20.25.3.1.1.3 integer read-write
Power Limit From Classification Enumeration: 'enable': 1, 'disable': 2.
                                                     poePortControlLegacy 1.3.6.1.4.1.25972.0.5.20.25.3.1.1.4 integer read-write
Legacy Enumeration: 'enable': 1, 'disable': 2.
                                                     poePortControlPriority 1.3.6.1.4.1.25972.0.5.20.25.3.1.1.5 integer read-write
Priority Enumeration: 'high': 2, 'critical': 1, 'low': 3.
                                                     poePortControlPowerLimit 1.3.6.1.4.1.25972.0.5.20.25.3.1.1.6 integer32 read-write
Power Limit (<15400)mW