NETSCREEN-VPN-MON-MIB: View SNMP OID List / Download MIB

VENDOR: NETSCREEN TECHNOLOGIES


 Home MIB: NETSCREEN-VPN-MON-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, NETSCREEN-SMI, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
     netscreenVpnMonMibModule 1.3.6.1.4.1.3224.4.0.1
This module defines the object that are used to monitor VPN tunnels
 netscreenVpnMon 1.3.6.1.4.1.3224.4.1
     nsVpnMonTable 1.3.6.1.4.1.3224.4.1.1 no-access
A list of active VPN tunnel entries.
         nsVpnMonEntry 1.3.6.1.4.1.3224.4.1.1.1 no-access
A VPN tunnel entry containing attributes for both IKE Phase 1 and Phase 2 as well as associated policy
             nsVpnMonIndex 1.3.6.1.4.1.3224.4.1.1.1.1 integer32 read-only
A unique value for each active VPN tunnel. Its value ranges between 1 and 65535 and may not be contiguous. Due to the dynamic nature of active VPN tunnels, the index has no other meaning but a pure index
             nsVpnMonInPlyId 1.3.6.1.4.1.3224.4.1.1.1.2 integer32 read-only
The incoming policy ID for which this tunnel is created for. -1 means no policy associates with this SA.
             nsVpnMonOutPlyId 1.3.6.1.4.1.3224.4.1.1.1.3 integer32 read-only
The outgoing policy ID for which this tunnel is created for. -1 means no policy associates with this SA.
             nsVpnMonVpnName 1.3.6.1.4.1.3224.4.1.1.1.4 displaystring read-only
A textual string contains information about the VPN entity from which this tunnel was derived.
             nsVpnMonVsysName 1.3.6.1.4.1.3224.4.1.1.1.5 displaystring read-only
A textual string contains the Virtual system to which this tunnel belongs.
             nsVpnMonTunnelType 1.3.6.1.4.1.3224.4.1.1.1.6 integer read-only
Protocol type used for the tunnel Enumeration: 'proto-isakmp': 1, 'proto-ipcomp': 4, 'proto-ipsec-esp': 3, 'reserved': 0, 'proto-ipsec-ah': 2.
             nsVpnMonEspEncAlg 1.3.6.1.4.1.3224.4.1.1.1.7 integer read-only
a value which identifies a particular algorithm to be used to provide secrecy protection for ESP. Enumeration: 'esp-3idea': 8, 'esp-rc5': 4, 'esp-rc4': 10, 'esp-des': 2, 'esp-idea': 5, 'esp-null': 11, 'esp-cast': 6, 'esp-des-iv64': 1, 'esp-3des': 3, 'esp-aes192': 20, 'esp-des-iv32': 9, 'esp-blowfish': 7, 'reserved': 0, 'esp-aes': 12, 'esp-aes256': 21.
             nsVpnMonEspAuthAlg 1.3.6.1.4.1.3224.4.1.1.1.8 integer read-only
The ESP Authentication Algorithm used in the IPsec. Enumeration: 'hmac-sha': 2, 'des-mac': 3, 'reserved': 0, 'hmac-md5': 1, 'ipdk': 4.
             nsVpnMonAhAlg 1.3.6.1.4.1.3224.4.1.1.1.9 integer read-only
a value which identifies a particular algorithm to be used to provide integrity protection for AH. Enumeration: 'ah-sha': 3, 'ah-des': 4, 'reserved': 0, 'ah-md5': 2.
             nsVpnMonKeyType 1.3.6.1.4.1.3224.4.1.1.1.10 integer read-only
a value which identifies a key exchange protocol to be used for the negotiation Enumeration: 'manual': 0, 'auto-ike': 1.
             nsVpnMonP1Auth 1.3.6.1.4.1.3224.4.1.1.1.11 integer read-only
a value which identifies Phase 1 authentication method Enumeration: 'rsa-Encryption2': 5, 'rsa-Encryption1': 4, 'rsa-Signature': 3, 'unused': 0, 'dss-Signature': 2, 'preshared-key': 1.
             nsVpnMonVpnType 1.3.6.1.4.1.3224.4.1.1.1.12 integer read-only
The type of this VPN tunnel, either a dialup or site-to-site Enumeration: 'site-to-site': 2, 'dialup': 1, 'reserved': 0.
             nsVpnMonRmtGwIp 1.3.6.1.4.1.3224.4.1.1.1.13 ipaddress read-only
The peer Gateway's IP address
             nsVpnMonRmtGwId 1.3.6.1.4.1.3224.4.1.1.1.14 displaystring read-only
The peer Gateway's ID
             nsVpnMonMyGwIp 1.3.6.1.4.1.3224.4.1.1.1.15 ipaddress read-only
The local Gateway's IP address
             nsVpnMonMyGwId 1.3.6.1.4.1.3224.4.1.1.1.16 displaystring read-only
The local Gateway's ID
             nsVpnMonOutSpi 1.3.6.1.4.1.3224.4.1.1.1.17 integer32 read-only
The SPI for outgoing packets
             nsVpnMonInSpi 1.3.6.1.4.1.3224.4.1.1.1.18 integer32 read-only
The SPI for incoming packets
             nsVpnMonMonState 1.3.6.1.4.1.3224.4.1.1.1.19 integer read-only
The monitoring status, if it is on, an icmp ping will be sent over the tunnel periodically to test the connectivity and latency Enumeration: 'on': 1, 'off': 0.
             nsVpnMonTunnelState 1.3.6.1.4.1.3224.4.1.1.1.20 integer read-only
The current tunnel status determined by the icmp ping if The monitoring status is on. Enumeration: 'down': 0, 'up': 1.
             nsVpnMonP1State 1.3.6.1.4.1.3224.4.1.1.1.21 integer read-only
The IKE's Phase 1 status Enumeration: 'active': 1, 'inactive': 0.
             nsVpnMonP1LifeTime 1.3.6.1.4.1.3224.4.1.1.1.22 integer32 read-only
an active Phase 1 sa's time left before re-key. -1 means unlimited lifetime.
             nsVpnMonP2State 1.3.6.1.4.1.3224.4.1.1.1.23 integer read-only
The IKE's Phase 2 status Enumeration: 'active': 1, 'inactive': 0.
             nsVpnMonP2LifeTime 1.3.6.1.4.1.3224.4.1.1.1.24 integer32 read-only
an active Phase 2 sa's time left before re-key. -1 means unlimited life time.
             nsVpnMonP2LifeBytes 1.3.6.1.4.1.3224.4.1.1.1.25 integer32 read-only
an active Phase 2 sa's bytes left before re-key. -1 means unlimited life bytes.
             nsVpnMonDelayAvg 1.3.6.1.4.1.3224.4.1.1.1.26 integer32 read-only
a kind of rolling average of latency, in milliseconds. -1 has no meaning here, which means nsVpnMonDelayAvg has not been calculated yet.
             nsVpnMonDelayLast 1.3.6.1.4.1.3224.4.1.1.1.27 integer32 read-only
latency in last sample, in milliseconds. -1 means either vpn tunnel is inactive or vpn tunnel monitor is not turned on.
             nsVpnMonAvail 1.3.6.1.4.1.3224.4.1.1.1.28 integer32 read-only
percentage over 30 samples
             nsVpnMonSaId 1.3.6.1.4.1.3224.4.1.1.1.29 integer32 read-only
SA identifier, also used as table index
             nsVpnMonGroupId 1.3.6.1.4.1.3224.4.1.1.1.30 integer32 read-only
Group Identifier
             nsVpnMonUsrId 1.3.6.1.4.1.3224.4.1.1.1.31 integer32 read-only
User Identifier
             nsVpnMonStartSessRequestTime 1.3.6.1.4.1.3224.4.1.1.1.32 timeticks read-only
Start Session request timestamp
             nsVpnMonStartSessEstTime 1.3.6.1.4.1.3224.4.1.1.1.33 timeticks read-only
Start Session establish timestamp
             nsVpnMonEndSessTime 1.3.6.1.4.1.3224.4.1.1.1.34 timeticks read-only
End Session timestamp [when session terminates]
             nsVpnMonBytesIn 1.3.6.1.4.1.3224.4.1.1.1.35 counter32 read-only
Incoming bytes through this sa.
             nsVpnMonBytesOut 1.3.6.1.4.1.3224.4.1.1.1.36 counter32 read-only
Outgoing bytes through this sa.
             nsVpnMonPacketsIn 1.3.6.1.4.1.3224.4.1.1.1.37 counter32 read-only
Incoming packets through this sa.
             nsVpnMonPacketsOut 1.3.6.1.4.1.3224.4.1.1.1.38 counter32 read-only
Outgoing packets through this sa.
             nsVpnMonIfIndex 1.3.6.1.4.1.3224.4.1.1.1.39 integer32 read-only
interface index.
             nsVpnMonUpdateTime 1.3.6.1.4.1.3224.4.1.1.1.40 timeticks read-only
Timestamp [Whenever any member of the row gets updated, the timestamp is updated]
             nsVpnMonDN 1.3.6.1.4.1.3224.4.1.1.1.41 displaystring read-only
DN name
             nsVpnMonIfInfo 1.3.6.1.4.1.3224.4.1.1.1.42 integer32 read-only
Internal id assigned to this interface. Stays persistent across resets.