NETSCREEN-INTERFACE-MIB: View SNMP OID List / Download MIB

VENDOR: NETSCREEN TECHNOLOGIES


 Home MIB: NETSCREEN-INTERFACE-MIB
Download as:   

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 netscreenInterfaceMibModule 1.3.6.1.4.1.3224.9.0
This module defines the object that are used to monitor NS's interface configuration
 nsIfTable 1.3.6.1.4.1.3224.9.1 no-access
All NetScreen devices have a trusted interface and an untrusted interface. The NetScreen-10 and -100 also have a DMZ interface. Additionally, on each of the virtual systems supported by the NetScreen-1000 there can be on or more tursted subinterfaces linking a particular virtual system to one or more virtual LANs. Other interfaces-some physical, some logical, and some virtual-provide exclusive channels for administrative traffic, or for communication among member in a redundant group. In this table, it will collect following interface: tursted interface, untrusted interface, DMZ interface, Management Interface and Subinterface.
     nsIfEntry 1.3.6.1.4.1.3224.9.1.1 no-access
nsIfEntry collects some attributes about NetScreen interface settings.
         nsIfIndex 1.3.6.1.4.1.3224.9.1.1.1 integer32 read-only
Interface number which uniquely identifies an interface.
         nsIfName 1.3.6.1.4.1.3224.9.1.1.2 displaystring read-only
Each interface has a readable name such as 'trust', 'trust/1', etc.
         nsIfVsys 1.3.6.1.4.1.3224.9.1.1.3 integer32 read-only
According NetScreen's concepts, each interface belongs to one virtual system. This attribute displays the virtual system name an interface belongs to. If the device is device which doesn't support vsys such as NS-100, we can logically think all the setting belongs to 'root' vsys.
         nsIfZone 1.3.6.1.4.1.3224.9.1.1.4 integer32 read-only
Each interface belongs to one security zone. This attribute displays the security zone name an interface belongs to.
         nsIfStatus 1.3.6.1.4.1.3224.9.1.1.5 integer read-only
The interface status which indicates interface's operational status. Enumeration: 'down': 0, 'ready': 2, 'inactive': 3, 'up': 1.
         nsIfIp 1.3.6.1.4.1.3224.9.1.1.6 ipaddress read-only
Each interface must be assigned an IP address.
         nsIfNetmask 1.3.6.1.4.1.3224.9.1.1.7 ipaddress read-only
Each interface must belong to a subnet represented by netmask.
         nsIfGateway 1.3.6.1.4.1.3224.9.1.1.8 ipaddress read-only
Default gateway ip address.
         nsIfMngIp 1.3.6.1.4.1.3224.9.1.1.9 ipaddress read-only
Trusted, untrusted and DMZ interfaces can have two IP address: an interface IP address that corresponds to the physical port through which that interface connects to a network, and a Manage IP address that can be used to receive administrative traffic
         nsIfMode 1.3.6.1.4.1.3224.9.1.1.10 integer read-only
NetScreen interface can has three operation modes. They are transparent, nat and route. Enumeration: 'route': 2, 'transparent': 0, 'nat': 1, 'not-applicable': 3.
         nsIfMAC 1.3.6.1.4.1.3224.9.1.1.11 physaddress read-only
MAC address the interface has.
         nsIfMngTelnet 1.3.6.1.4.1.3224.9.1.1.12 integer read-only
This attribute is used to indicate whether the interface permits telnet management. Enumeration: 'enable': 1, 'disable': 0.
         nsIfMngSCS 1.3.6.1.4.1.3224.9.1.1.13 integer read-only
This attribute is used to indicate whether the interface permits Secure Command Shell management. Enumeration: 'enable': 1, 'disable': 0.
         nsIfMngWEB 1.3.6.1.4.1.3224.9.1.1.14 integer read-only
This attribute is used to indicate whether the interface permits WEB UI management. Enumeration: 'enable': 1, 'disable': 0.
         nsIfMngSSL 1.3.6.1.4.1.3224.9.1.1.15 integer read-only
This attribute is used to indicate whether the interface permits SSL management. Enumeration: 'enable': 1, 'disable': 0.
         nsIfMngSNMP 1.3.6.1.4.1.3224.9.1.1.16 integer read-only
This attribute is used to indicate whether the interface permits SNMP management. Enumeration: 'enable': 1, 'disable': 0.
         nsIfMngGlobal 1.3.6.1.4.1.3224.9.1.1.17 integer read-only
This attribute is used to indicate whether the interface permits NS Global management. Enumeration: 'enable': 1, 'disable': 0.
         nsIfMngGlobalPro 1.3.6.1.4.1.3224.9.1.1.18 integer read-only
This attribute is used to indicate whether the interface permits NS Global Pro management. Enumeration: 'enable': 1, 'disable': 0.
         nsIfMngPing 1.3.6.1.4.1.3224.9.1.1.19 integer read-only
This attribute is used to indicate whether the interface permits Ping go-through. Enumeration: 'enable': 1, 'disable': 0.
         nsIfMngIdentReset 1.3.6.1.4.1.3224.9.1.1.20 integer read-only
This attribute is used to indicate whether the interface permits ident reset. Enumeration: 'enable': 1, 'disable': 0.
         nsIfInfo 1.3.6.1.4.1.3224.9.1.1.21 integer32 read-only
Internal id assigned to this interface. Stays persistent across resets.
         nsIfDescr 1.3.6.1.4.1.3224.9.1.1.22 displaystring read-only
Each interface has a a configurable descriptor string.
 nsIfSecondaryIpTable 1.3.6.1.4.1.3224.9.2 no-access
In some ScreenOS, it supports multiple IP addresses and related subnets based on the same interface. This table collects the multiple IP addresses configuration on an interface.
     nsIfSecondaryIpEntry 1.3.6.1.4.1.3224.9.2.1 no-access
nsIfSecondaryIpEntry collects some attributes about multiple IP configurations on an interface.
         nsIfSecondaryIpIndex 1.3.6.1.4.1.3224.9.2.1.1 integer32 read-only
The table index used as primary key when retrieving the table.
         nsIfSecondaryIpIfIdx 1.3.6.1.4.1.3224.9.2.1.2 integer32 read-only
The index value which uniquely identifies an interface the secodary ip belongs to. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.
         nsIfSecondaryIpVsys 1.3.6.1.4.1.3224.9.2.1.3 integer32 read-only
According NetScreen's concepts, each interface belongs to one virtual system. This attribute displays the virtual system ID an interface belongs to. If the device is device which doesn't support vsys such as NS-100, we can logically think all the setting belongs to 'root' vsys.
         nsIfSecondaryIpZone 1.3.6.1.4.1.3224.9.2.1.4 integer32 read-only
each interface belongs to one security zone. this attribute displays the security zone name an interface belongs to.
         nsIfSecondaryIpAddress 1.3.6.1.4.1.3224.9.2.1.5 ipaddress read-only
Ip Address value.
         nsIfSecondaryIpNetmask 1.3.6.1.4.1.3224.9.2.1.6 ipaddress read-only
Subnet of a ip belongs to.
         nsIfSecondaryIpIfInfo 1.3.6.1.4.1.3224.9.2.1.7 integer32 read-only
Internal id assigned to this interface. Stays persistent across resets.
 nsIfFlowTable 1.3.6.1.4.1.3224.9.3 no-access
nsIfFlowTable is used to get flow statistical information of the interface.
     nsIfFlowEntry 1.3.6.1.4.1.3224.9.3.1 no-access
Table entry collect some attributes about interface flow counters.
         nsIfFlowIfIdx 1.3.6.1.4.1.3224.9.3.1.1 integer32 read-only
Unique interface id, also used as table index.
         nsIfFlowVsys 1.3.6.1.4.1.3224.9.3.1.2 integer32 read-only
According NetScreen's concepts. each interface belongs to one virtual system. This attribute displays the virtual system name an interface belongs to.
         nsIfFlowInByte 1.3.6.1.4.1.3224.9.3.1.3 counter32 read-only
Incoming byte number arriving at the this interface
         nsIfFlowInPacket 1.3.6.1.4.1.3224.9.3.1.4 counter32 read-only
Incoming packet number arriving at the this interface
         nsIfFlowOutByte 1.3.6.1.4.1.3224.9.3.1.5 counter32 read-only
Outgoing byte number sending through this interface
         nsIfFlowOutPacket 1.3.6.1.4.1.3224.9.3.1.6 counter32 read-only
Outgoing packet number sending through this interface
         nsIfFlowInVpn 1.3.6.1.4.1.3224.9.3.1.7 counter32 read-only
VPN packet go through this interface
         nsIfInVlan 1.3.6.1.4.1.3224.9.3.1.8 counter32 read-only
Incoming vlan packet
         nsIfOutVlan 1.3.6.1.4.1.3224.9.3.1.9 counter32 read-only
Outgoing vlan packet
         nsIfFlowIfInfo 1.3.6.1.4.1.3224.9.3.1.10 integer32 read-only
Internal id assigned to this interface. Stays persistent across resets.
 nsIfMonTable 1.3.6.1.4.1.3224.9.4 no-access
This table collects some of dropped packet counters of interface
     nsIfMonEntry 1.3.6.1.4.1.3224.9.4.1 no-access
An entry containing tunnel information
         nsIfMonIfIdx 1.3.6.1.4.1.3224.9.4.1.1 integer32 read-only
Unique interface id, also used as table index.
         nsIfMonVsys 1.3.6.1.4.1.3224.9.4.1.2 integer32 read-only
According NetScreen's concepts, each interface belongs to one virtual system. This attribute displays the virtual system name an interface belongs to.
         nsIfMonPlyDeny 1.3.6.1.4.1.3224.9.4.1.3 counter32 read-only
Packet drop since denied by policy.
         nsIfMonAuthFail 1.3.6.1.4.1.3224.9.4.1.4 counter32 read-only
Packet drop due to authentication failed.
         nsIfMonUrlBlock 1.3.6.1.4.1.3224.9.4.1.5 counter32 read-only
Packet drop due to URL blocking.
         nsIfMonTrMngQueue 1.3.6.1.4.1.3224.9.4.1.6 counter32 read-only
packet queue up due to traffic management
         nsIfMonTrMngDrop 1.3.6.1.4.1.3224.9.4.1.7 counter32 read-only
Packet drop due to traffic management
         nsIfMonEncFail 1.3.6.1.4.1.3224.9.4.1.8 counter32 read-only
IPSec enc failed due to sa not available, no ipak, etc
         nsIfMonNoSa 1.3.6.1.4.1.3224.9.4.1.9 counter32 read-only
packet drop due to no sa found for incomig spi
         nsIfMonNoSaPly 1.3.6.1.4.1.3224.9.4.1.10 counter32 read-only
packet drop due to no policy associated with found sa
         nsIfMonSaInactive 1.3.6.1.4.1.3224.9.4.1.11 counter32 read-only
packet drop due to sa not active
         nsIfMonSaPolicyDeny 1.3.6.1.4.1.3224.9.4.1.12 counter32 read-only
packet drop due to denial by sa policy
         nsIfMonIfInfo 1.3.6.1.4.1.3224.9.4.1.13 integer32 read-only
Internal id assigned to this interface. Stays persistent across resets.