NETREALITY-MIB: View SNMP OID List / Download MIB

VENDOR: NETREALITY


 Home MIB: NETREALITY-MIB
Download as:   
SNMPv2-CONF, RFC1315-MIB, SNMPv2-TC, SNMPv2-SMI

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 netreality 1.3.6.1.4.1.2382
           nrGeneral 1.3.6.1.4.1.2382.1
               nrManagers 1.3.6.1.4.1.2382.1.1
                   nrTrapHostsTable 1.3.6.1.4.1.2382.1.1.1 no-access
A list of trap_hosts entries.
                       nrTrapHostsEntry 1.3.6.1.4.1.2382.1.1.1.1 no-access
A trap-receiving host entry, containing trap-host objects for a particular host.
                           nrTrapIPaddress 1.3.6.1.4.1.2382.1.1.1.1.1 ipaddress read-write
The ip address of the host to be sent all traps
                           nrTrapPort 1.3.6.1.4.1.2382.1.1.1.1.2 integer read-write
UDP port number for receiving agent traps. port=0 will delete all entry
               nrSystem 1.3.6.1.4.1.2382.1.2
                   nrSysReset 1.3.6.1.4.1.2382.1.2.1 integer read-write
Setting the value of this attribute to ON is interpreted as a reset command for the system. Enumeration: 'on': 1, 'off': 2.
                   nrSysSetDefaults 1.3.6.1.4.1.2382.1.2.2 integer read-write
Setting the value of this attribute to Start will cause the system to set the persitent parameters to the factory default values. These values will become active after the next system reset Enumeration: 'set': 2, 'off': 1, 'in-process': 3.
                   nrSysTrapCounter 1.3.6.1.4.1.2382.1.2.3 counter read-only
This attribute counts the total number of traps generated by the device, since initialization.
                   nrSysEventReset 1.3.6.1.4.1.2382.1.2.4 integer read-write
This attribute reinitiate the Alaram/Events group as if the agent was restarted. The management raises this flag in case the management restart or in case it lost syncronisation with the agent Enumeration: 'reset': 2, 'in-process': 3, 'off': 1.
                   nrSysSerial 1.3.6.1.4.1.2382.1.2.5 displaystring read-only
Box's hardware serial number, for example: WW298090218
               nrTrapInfo 1.3.6.1.4.1.2382.1.3
                   nrTrapRSType 1.3.6.1.4.1.2382.1.3.1 integer read-only
This attribute identifies the resource type Enumeration: 'com1': 5, 'unknown': 6, 'flash': 4, 'memory': 1, 'ethernet': 2, 'wanadapter': 3.
           nrProducts 1.3.6.1.4.1.2382.2
               nrWanwise 1.3.6.1.4.1.2382.2.1
           nrFr 1.3.6.1.4.1.2382.3
               nrInterface 1.3.6.1.4.1.2382.3.1
                   nrIfTable 1.3.6.1.4.1.2382.3.1.1 no-access
                       nrIfEntry 1.3.6.1.4.1.2382.3.1.1.1 no-access
                           nrIfIndex 1.3.6.1.4.1.2382.3.1.1.1.1 integer read-only
Such as the interface index in MIB2
                           nrIfInUtilization 1.3.6.1.4.1.2382.3.1.1.1.2 integer read-only
It contains the In utilization calculated every 1 minute as Delta(In Octets) * 8 * 100 / (ifspeed * 60)
                           nrIfOutUtilization 1.3.6.1.4.1.2382.3.1.1.1.3 integer read-only
It contains the Out utilization calculated every 1 minute as Delat(nrOutLastOctets) * 8 * 100 / (ifspeed * 60)
                           nrIfInErrRatio 1.3.6.1.4.1.2382.3.1.1.1.4 integer read-only
It contains the In Error packet percentage calculated every 60 seconds as follows: Bad Packets * 100 / (Good Packets + Bad Packets)
                           nrIfOutErrRatio 1.3.6.1.4.1.2382.3.1.1.1.5 integer read-only
It contains the Out Error packet percentage calculated every 60 seconds as follows: Bad Packets * 100 / (Good Packets + Bad Packets)
                           nrIfPhysConnType 1.3.6.1.4.1.2382.3.1.1.1.6 integer read-only
Type of physical cable/line Enumeration: 'active': 2, 'passive': 3, 'other': 1.
                           nrIfType 1.3.6.1.4.1.2382.3.1.1.1.7 integer read-only
Mib2 ifType detaled. Enumeration: 'hssi': 9, 'frame-relay-cisco': 11, 'v35': 2, 'hdlc-cisco': 13, 'frame-relay': 10, 'x21-x24': 5, 't1': 7, 'ppp': 12, 'other': 1, 'eia530-rs449': 4, 'ppp-bay': 14, 'rs232': 6, 'e1': 8, 'v35db': 3.
                           nrIfOperMode 1.3.6.1.4.1.2382.3.1.1.1.8 integer read-only
Operational mode for current interface Enumeration: 'shaper': 3, 'other': 1, 'monitor': 2.
                           nrIfGroupNm 1.3.6.1.4.1.2382.3.1.1.1.9 integer read-only
Group number to which current interface belongs.
               nrFrame_relay 1.3.6.1.4.1.2382.3.2
                   nrFrCircuitTable 1.3.6.1.4.1.2382.3.2.2 no-access
The 1315 Circuit Table extension
                       nrFrCircuitEntry 1.3.6.1.4.1.2382.3.2.2.1 no-access
extension varibles for a sinngle DLCI
                           nrFrCircuitIfIndex 1.3.6.1.4.1.2382.3.2.2.1.1 index read-only
Such as 1315 circuit table - the interface index
                           nrFrCircuitDlci 1.3.6.1.4.1.2382.3.2.2.1.2 dlci read-only
Such as 1315 circuit table - the dlci number
                           nrFrCircuitInCIRUtilization 1.3.6.1.4.1.2382.3.2.2.1.3 integer read-only
Delta in * 100 / CIR * 60
                           nrFrCircuitOutCIRUtilization 1.3.6.1.4.1.2382.3.2.2.1.4 integer read-only
Delta out octets * 100 / CIR * 60
                           nrFrCircuitInDiscard 1.3.6.1.4.1.2382.3.2.2.1.5 counter read-only
The total number of in octets not counted by the higher layers
                           nrFrCircuitOutDiscard 1.3.6.1.4.1.2382.3.2.2.1.6 counter read-only
The total number of out octets not counted by the higher layers
                           nrFrCircuitEchoAddress 1.3.6.1.4.1.2382.3.2.2.1.7 ipaddress read-write
The ip address of the host to be sent response time measurement packets
                           nrFrCircuitEchoProto 1.3.6.1.4.1.2382.3.2.2.1.8 integer read-write
Protocol for reponse time measurements Enumeration: 'icmp': 2, 'other': 1.
                           nrFrCircuitEchoStatus 1.3.6.1.4.1.2382.3.2.2.1.9 integer read-write
Operational status of reponse time measurements Enumeration: 'on': 2, 'off': 1.
                           nrFrCircuitLastResponseTime 1.3.6.1.4.1.2382.3.2.2.1.10 integer read-only
Last response time measurement result (in msec). Value = 0 means the measurement failure
               nrRmon 1.3.6.1.4.1.2382.3.3
                   nrNlMatrix 1.3.6.1.4.1.2382.3.3.1
                       nrNlMatrixTable 1.3.6.1.4.1.2382.3.3.1.1 no-access
The RMON2 nl Matrix
                           nrNlMatrixEntry 1.3.6.1.4.1.2382.3.3.1.1.1 no-access
                               nrNlMatrixifNumber 1.3.6.1.4.1.2382.3.3.1.1.1.1 integer read-only
The interface number
                               nrNlMatrixDlciNumber 1.3.6.1.4.1.2382.3.3.1.1.1.2 integer read-only
The DLCI number (if+DLCI uniquely identifies the data source) This is a simpler form of the RMON2 standard which uses the data source OID
                               nrNlMatrixProtocol 1.3.6.1.4.1.2382.3.3.1.1.1.3 integer read-only
The value of the protocol directory local index
                               nrNlMatrixAddress1 1.3.6.1.4.1.2382.3.3.1.1.1.4 octet string read-only
The NL address of one of the conversation parties
                               nrNlMatrixAddress2 1.3.6.1.4.1.2382.3.3.1.1.1.5 octet string read-only
The NL address of the other (than address1) conversation party
                               nrNl1to2UfromCIR 1.3.6.1.4.1.2382.3.3.1.1.1.6 integer read-only
The total number of send and receive octets / CIR. In case of No CIR is exists - use a default CIR which is ifspeed/no. of DLCI per line
                   nrNlHost 1.3.6.1.4.1.2382.3.3.2
                       nrNlHostTable 1.3.6.1.4.1.2382.3.3.2.1 no-access
The RMON2 nl Matrix
                           nrNlHostEntry 1.3.6.1.4.1.2382.3.3.2.1.1 no-access
                               nrNlHostifNumber 1.3.6.1.4.1.2382.3.3.2.1.1.1 integer read-only
The line interface number
                               nrNlHostDlciNumber 1.3.6.1.4.1.2382.3.3.2.1.1.2 integer read-only
The DLCI number (if+DLCI uniquely identifies the data source) This is a simpler form of the RMON2 standard which uses the data source OID
                               nrNlHostProtocol 1.3.6.1.4.1.2382.3.3.2.1.1.3 integer read-only
The value of the protocol directory local index
                               nrNlHostAddress 1.3.6.1.4.1.2382.3.3.2.1.1.4 octet string read-only
The NL address of one of the conversation parties
                               nrNlHostUtilization 1.3.6.1.4.1.2382.3.3.2.1.1.5 integer read-only
The total number of send and receive octets for a specific Host out of the CIR. In case of No CIR is exists - use a default CIR which is ifspeed/no. of DLCI per line
               nrBulk 1.3.6.1.4.1.2382.3.4
                   nrtCtrl 1.3.6.1.4.1.2382.3.4.1
                       nrtCtrlLtermInterval 1.3.6.1.4.1.2382.3.4.1.1 integer read-write
The periodical time the agent is freezing a long term statistics When any time periods are changed all previous buckets are purged and collection restarts
                       nrtCtrlLtermBucketsGrant 1.3.6.1.4.1.2382.3.4.1.2 integer read-only
                       nrtCtrlLtermLast 1.3.6.1.4.1.2382.3.4.1.3 integer read-only
The index of the last long term Bucket.
                       nrtCtrlLtermTime 1.3.6.1.4.1.2382.3.4.1.4 integer read-only
The agent's sysuptime - when the last long term bucket was collected
                       nrtCtrlStermInterval 1.3.6.1.4.1.2382.3.4.1.5 integer read-write
                       nrtCtrlStermBucketsGrant 1.3.6.1.4.1.2382.3.4.1.6 integer read-only
                       nrtCtrlStermLast 1.3.6.1.4.1.2382.3.4.1.7 integer read-only
The index of the last short term Bucket.
                       nrtCtrlStermTime 1.3.6.1.4.1.2382.3.4.1.8 integer read-only
The agent's sysuptime - when the last short term bucket was collected
                   nrShortTermData 1.3.6.1.4.1.2382.3.4.2
                       nrShortTermDataTable 1.3.6.1.4.1.2382.3.4.2.1 no-access
                           nrShortTermDataEntry 1.3.6.1.4.1.2382.3.4.2.1.1 no-access
                               nrShortTermBucketIndex 1.3.6.1.4.1.2382.3.4.2.1.1.1 integer read-only
The bucket index is a sequential index without repetition (1/2min * 2**32)...
                               nrShortTermDataIndex 1.3.6.1.4.1.2382.3.4.2.1.1.2 integer read-only
The data index is a sequential index starts at 1 for every bucket
                               nrShortTermDataData 1.3.6.1.4.1.2382.3.4.2.1.1.3 octet string read-only
                   nrLongTermData 1.3.6.1.4.1.2382.3.4.3
                       nrLongTermDataTable 1.3.6.1.4.1.2382.3.4.3.1 no-access
                           nrLongTermDataEntry 1.3.6.1.4.1.2382.3.4.3.1.1 no-access
                               nrLongTermBucketIndex 1.3.6.1.4.1.2382.3.4.3.1.1.1 integer read-only
The bucket index is a sequential index without repetition (1/2min * 2**32)...
                               nrLongTermDataIndex 1.3.6.1.4.1.2382.3.4.3.1.1.2 integer read-only
The data index is a sequential index starts at 1 for every bucket
                               nrLongTermDataData 1.3.6.1.4.1.2382.3.4.3.1.1.3 octet string read-only
             nrShortResources 1.3.6.1.4.1.23820.1
A trap indicating shortage of agent resources.
             nrDiagnosticFailure 1.3.6.1.4.1.23820.2
A trap indicating resource failure
             nrDLCIRemove 1.3.6.1.4.1.23820.3
A trap indicating DLCI remove. The varibles specifies it's interface and DLCI number