NETEXEC-MIB: View SNMP OID List / Download MIB

VENDOR: TYLINK


 Home MIB: NETEXEC-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 internet 1.3.6.1
     private 1.3.6.1.4
         enterprises 1.3.6.1.4.1
             tylink 1.3.6.1.4.1.466
                     netexec 1.3.6.1.4.1.466.6
                         dsucsu 1.3.6.1.4.1.466.6.1
                             dsucsuSysTable 1.3.6.1.4.1.466.6.1.1 no-access
A list of system level attributes describing the addressed node.
                                 dsucsuSysEntry 1.3.6.1.4.1.466.6.1.1.1 no-access
System Object for a DSU/CSU
                                     dsucsuSysSlot 1.3.6.1.4.1.466.6.1.1.1.1 integer read-only
The PC port to which the TyView node is attached.
                                     dsucsuSysNode 1.3.6.1.4.1.466.6.1.1.1.2 integer read-only
The node ID: unique per port ID.
                                     dsucsuSysName 1.3.6.1.4.1.466.6.1.1.1.3 displaystring read-only
The unique name of the node accessed
                                     dsucsuSysType 1.3.6.1.4.1.466.6.1.1.1.4 integer read-only
A desciption of the system model: ie. ONS400, FNS400, ONS1000X, BLACK BOX FT1-4 Enumeration: 'sns400': 5, 'ty3250': 17, 'ty3410': 14, 'sns4000': 12, 'unknown': 1, 'ons232sp': 7, 'ons400n': 10, 'ons400': 2, 'fns400': 3, 'ons1010n': 16, 'ons1000': 6, 'ty3000n': 18, 'sns1000': 13, 'ons271sp': 8, 'ty3450n': 19, 'ons200': 9, 'ty3210': 15, 'ons400e': 4, 'sns256': 11.
                                     dsucsuSysSoftRev 1.3.6.1.4.1.466.6.1.1.1.5 displaystring read-only
Displays the Software Revision of the accessed node.
                                     dsucsuSysHardRev 1.3.6.1.4.1.466.6.1.1.1.6 displaystring read-only
Displays the Hardware Revision of the accessed node.
                                     dsucsuSysNumChan 1.3.6.1.4.1.466.6.1.1.1.7 integer read-only
The number of channels that are installed on the node.
                             dsucsuCfgNetTable 1.3.6.1.4.1.466.6.1.2 no-access
Network Line Configuration
                                 dsucsuCfgNetEntry 1.3.6.1.4.1.466.6.1.2.1 no-access
Configuration Object for a DSU/CSU
                                     dsucsuCfgNetSlot 1.3.6.1.4.1.466.6.1.2.1.1 integer read-only
The NEST slot to which the TyLink card is attached.
                                     dsucsuCfgNetNode 1.3.6.1.4.1.466.6.1.2.1.2 integer read-only
The node ID: unique per port ID.
                                     dsucsuCfgNetIndex 1.3.6.1.4.1.466.6.1.2.1.3 integer read-only
The network index.
                                     dsucsuCfgNetInterface 1.3.6.1.4.1.466.6.1.2.1.4 integer read-write
The interface type for 3000N. For a T1 line, NETWORK or DSX-1 is valid. Enumeration: 'dsx-1': 2, 'network': 1.
                                     dsucsuCfgNetType 1.3.6.1.4.1.466.6.1.2.1.5 integer read-write
The aggregate line type. Enumeration: 'd4': 1, 'esf-54016': 2, 'esf-ansi': 3, 'cept-2048': 5, 'nsms': 4.
                                     dsucsuCfgNetCoding 1.3.6.1.4.1.466.6.1.2.1.6 integer read-write
The encoding scheme for the line. For a T1 line, AMI and B8ZS are valid. For an E1 line, AMI and HDB3 are valid. Enumeration: 'ami': 1, 'hdb3': 3, 'b8zs': 2.
                                     dsucsuCfgNetClockSource 1.3.6.1.4.1.466.6.1.2.1.7 integer read-write
The aggregate timing for the addressed node. Enumeration: 'external-ch1': 3, 'station-clock': 5, 'external-ch3': 4, 'internal': 1, 'loop': 2.
                                     dsucsuCfgNetCsuEnable 1.3.6.1.4.1.466.6.1.2.1.8 integer read-write
Enable/Disable Internal CSU. Enumeration: 'cs': 2, 'dsx1': 1.
                                     dsucsuCfgNetCsuLBO 1.3.6.1.4.1.466.6.1.2.1.9 integer read-write
The setting of the Line Buildout switch. Setting must be db_0 if network interface is DSX-1. Enumeration: 'db-0': 1, 'db-7-5': 2, 'db-15': 3.
                                     dsucsuCfgNetCsuDensity 1.3.6.1.4.1.466.6.1.2.1.10 integer read-write
The setting of the one stuffing option. Inserts a 1 into the 8th, 16th, or 64th bit position (depending on the selection) if the previous 7 bits were 0's. Enumeration: 'd-12pt5-percent': 5, 'none': 1, 'd-1-in-16': 3, 'd-1-in-64': 4, 'd-1-in-8': 2.
                                     dsucsuCfgNetRateMultiples 1.3.6.1.4.1.466.6.1.2.1.11 integer read-write
The channel rate multiples for each of the ports. Enumeration: 'nx64': 2, 'all-rates': 4, 'nx56': 1, 'extended-mixed': 3.
                                     dsucsuCfgNetOutputPulse 1.3.6.1.4.1.466.6.1.2.1.12 integer read-write
The distance to the CSU in feet. Enumeration: 'pulse-533-655-ft': 5, 'pulse-266-399-ft': 3, 'pulse-399-533-ft': 4, 'pulse-0-133-ft': 1, 'pulse-133-266-ft': 2.
                                     dsucsuCfgNetTs0 1.3.6.1.4.1.466.6.1.2.1.13 integer read-write
The E1 Timeslot 0 value. Enumeration: 'crc4-disable': 2, 'crc4-enable': 1.
                                     dsucsuCfgNetTs16 1.3.6.1.4.1.466.6.1.2.1.14 integer read-write
The E1 Timeslot 16 value. Valid values are data and multiframe alignment. Enumeration: 'data': 1, 'multifr-align': 2.
                             dsucsuCfgDteChanTable 1.3.6.1.4.1.466.6.1.4 no-access
DTE Channel Configuration
                                 dsucsuCfgDteChanEntry 1.3.6.1.4.1.466.6.1.4.1 no-access
DTE Channel Configuration Object for a DSU/CSU
                                     dsucsuCfgDteChanSlot 1.3.6.1.4.1.466.6.1.4.1.1 integer read-only
The PC port to which the TyView node is attached.
                                     dsucsuCfgDteChanNode 1.3.6.1.4.1.466.6.1.4.1.2 integer read-only
The node ID: unique per port ID.
                                     dsucsuCfgDteChanIndex 1.3.6.1.4.1.466.6.1.4.1.3 integer read-only
The channel index.
                                     dsucsuCfgDteChanType 1.3.6.1.4.1.466.6.1.4.1.4 integer read-write
The Dte channel type. Enumeration: 'none': 4, 'rs232': 1, 'rs449': 3, 'v35': 2.
                                     dsucsuCfgDteChanRate 1.3.6.1.4.1.466.6.1.4.1.5 integer read-write
The Data rate in kilobits per second. The rate is dependent on the setting of the Aggregate DTE channel multiples.
                                     dsucsuCfgDteChanEncoding 1.3.6.1.4.1.466.6.1.4.1.6 integer read-write
The Channel encoding. Enumeration: 'alt': 2, 'b7s': 1, 'clr': 3.
                                     dsucsuCfgDteChanStartDs0 1.3.6.1.4.1.466.6.1.4.1.7 integer read-write
The starting DS0 for the addressed channel's data.
                                     dsucsuCfgDteChanCtrlSignal 1.3.6.1.4.1.466.6.1.4.1.8 integer read-write
The control signal state. Enumeration: 'rts-switch': 2, 'cts-auto': 4, 'rts-on': 1, 'cts-on': 3.
                                     dsucsuCfgDteChanTiming 1.3.6.1.4.1.466.6.1.4.1.9 integer read-write
The DTE channel Timing. Enumeration: 'loop2': 2, 'loop1': 1.
                                     dsucsuCfgDteChanClockInvert 1.3.6.1.4.1.466.6.1.4.1.10 integer read-write
The DTE channel Clock Invert setting. Enumeration: 'on': 2, 'off': 1.
                                     dsucsuCfgDteChanDataInvert 1.3.6.1.4.1.466.6.1.4.1.11 integer read-write
The DTE channel Data Invert setting. Enumeration: 'on': 2, 'off': 1.
                             dsucsuCfgFrmChanTable 1.3.6.1.4.1.466.6.1.5 no-access
Framed Channel Configuration
                                 dsucsuCfgFrmChanEntry 1.3.6.1.4.1.466.6.1.5.1 no-access
Framed Channel Configuration Object for a DSU/CSU
                                     dsucsuCfgFrmChanSlot 1.3.6.1.4.1.466.6.1.5.1.1 integer read-only
The PC port to which the TyView node is attached.
                                     dsucsuCfgFrmChanNode 1.3.6.1.4.1.466.6.1.5.1.2 integer read-only
The node ID: unique per port ID.
                                     dsucsuCfgFrmChanIndex 1.3.6.1.4.1.466.6.1.5.1.3 integer read-only
The channel index.
                                     dsucsuCfgFrmChanType 1.3.6.1.4.1.466.6.1.5.1.4 integer read-only
The framed channel type. Enumeration: 'none': 2, 'pbx': 1.
                                     dsucsuCfgFrmChanNumDs0 1.3.6.1.4.1.466.6.1.5.1.5 integer read-write
The number of DS0's on the network side.
                                     dsucsuCfgFrmChanEncoding 1.3.6.1.4.1.466.6.1.5.1.6 integer read-write
The channel line code. Enumeration: 'ami': 1, 'b8zs': 2.
                                     dsucsuCfgFrmChanStartDs0 1.3.6.1.4.1.466.6.1.5.1.7 integer read-write
The starting DS0 on the network side.
                                     dsucsuCfgFrmChanDteStartDs0 1.3.6.1.4.1.466.6.1.5.1.8 integer read-write
The starting DS0 on the framed channel.
                                     dsucsuCfgFrmChanMapping 1.3.6.1.4.1.466.6.1.5.1.9 integer read-write
The Framed channel Mapping. Enumeration: 'ctg-ds0': 1, 'alt-ds0': 2.
                                     dsucsuCfgFrmChanDs0Type 1.3.6.1.4.1.466.6.1.5.1.10 integer read-write
The Framed channel DS0 Type. Enumeration: 'mixed': 3, 'voice': 2, 'data': 1.
                                     dsucsuCfgFrmChanFrameType 1.3.6.1.4.1.466.6.1.5.1.11 integer read-write
The Framed channel Frame Type. Enumeration: 'esf': 2, 'd4': 1.
                                     dsucsuCfgFrmChanOutputPulse 1.3.6.1.4.1.466.6.1.5.1.12 integer read-write
The cabling distance from the PBX to the PBX channel port in feet. Enumeration: 'pulse-533-655-ft': 5, 'pulse-266-399-ft': 3, 'pulse-399-533-ft': 4, 'pulse-0-133-ft': 1, 'pulse-133-266-ft': 2.
                                     dsucsuCfgFrmChanNetMapping 1.3.6.1.4.1.466.6.1.5.1.13 integer read-write
The Network Ds0 Mapping. Enumeration: 'ctg-ds0': 1, 'alt-ds0': 2.
                             dsucsuConfigSupTable 1.3.6.1.4.1.466.6.1.7 no-access
Inband Supervisory Channel Configuration
                                 dsucsuConfigSupEntry 1.3.6.1.4.1.466.6.1.7.1 no-access
Inband Supervisory Configuration Object for a DSU/CSU
                                     dsucsuConfigSupSlot 1.3.6.1.4.1.466.6.1.7.1.1 integer read-only
The PC port to which the TyView node is attached.
                                     dsucsuConfigSupNode 1.3.6.1.4.1.466.6.1.7.1.2 integer read-only
The node ID: unique per port ID.
                                     dsucsuConfigSupIndex 1.3.6.1.4.1.466.6.1.7.1.3 integer read-only
The Supervisory channel index. Index 1 refers to supervisory channel A. Index 2 refers to supervisory channel B.
                                     dsucsuConfigSupDs0 1.3.6.1.4.1.466.6.1.7.1.4 integer read-write
The DS0 to place the Supervisory channel in.
                             dsucsuCfgSupAuxTable 1.3.6.1.4.1.466.6.1.8 no-access
Auxillary Supervisory Channel Configuration
                                 dsucsuCfgSupAuxEntry 1.3.6.1.4.1.466.6.1.8.1 no-access
Auxilary Supervisory Configuration Object for a DSU/CSU
                                     dsucsuCfgSupAuxSlot 1.3.6.1.4.1.466.6.1.8.1.1 integer read-only
The PC port to which the TyView node is attached.
                                     dsucsuCfgSupAuxNode 1.3.6.1.4.1.466.6.1.8.1.2 integer read-only
The node ID: unique per port ID.
                                     dsucsuCfgSupAuxIndex 1.3.6.1.4.1.466.6.1.8.1.3 integer read-only
Auxillary Supervisory Channel Configuration Index Index 1 refers to FDL supervisory on PORT 1. Index 2 refers to FDL supervisory on PORT 2.
                                     dsucsuCfgSupAuxFdl 1.3.6.1.4.1.466.6.1.8.1.4 integer read-write
Places the supervisory link bits within the Facility Data Link bits of the Extended Superframe. Enumeration: 'on': 2, 'off': 1.
                             dsucsuActvConfTable 1.3.6.1.4.1.466.6.1.9 no-access
Activate a stored configuration on the selected node.
                                 dsucsuActvConfEntry 1.3.6.1.4.1.466.6.1.9.1 no-access
An activate configuration entry.
                                     dsucsuActvConfSlot 1.3.6.1.4.1.466.6.1.9.1.1 integer read-only
The PC port to which the TyView node is attached.
                                     dsucsuActvConfNode 1.3.6.1.4.1.466.6.1.9.1.2 integer read-only
The node ID: unique per port ID.
                                     dsucsuActvConfIndex 1.3.6.1.4.1.466.6.1.9.1.3 integer read-write
Activate one of the four stored configurations.
                             dsucsuEventDesTable 1.3.6.1.4.1.466.6.1.10 no-access
Table of event destinations. Events or alarms detected by a node can be reported to up to two destinations. The operator can set or clear either or both of these destinations via this Table.
                                   dsucsuEventDesEntry 1.3.6.1.4.1.466.6.1.10.1 no-access
Entry in the table of event destinations.
                                       dsucsuEventDesSlot 1.3.6.1.4.1.466.6.1.10.1.1 integer read-only
The PC port to which the TyView node is attached.
                                       dsucsuEventDesNode 1.3.6.1.4.1.466.6.1.10.1.2 integer read-only
The node ID: unique per port ID.
                                       dsucsuEventNameIndx 1.3.6.1.4.1.466.6.1.10.1.3 displaystring read-only
The unique name of the node accessed.
                                       dsucsuEventDesName1 1.3.6.1.4.1.466.6.1.10.1.4 displaystring read-write
The name of the node/PC where the alarms will be sent to.
                                       dsucsuEventDesName2 1.3.6.1.4.1.466.6.1.10.1.5 displaystring read-write
The name of the alternate node/PC where the alarms will be sent to.
                                       dsucsuEventClrDest 1.3.6.1.4.1.466.6.1.10.1.6 integer read-write
Clears the destination(s) for the reporting of alarms. Enumeration: 'clearBothDest': 3, 'clearDest2': 2, 'clearDest1': 1.
                             dsucsuCfgMaintTable 1.3.6.1.4.1.466.6.1.11 no-access
Maint. Port Configuration
                                   dsucsuCfgMaintEntry 1.3.6.1.4.1.466.6.1.11.1 no-access
Maint. Port Configuration Object
                                       dsucsuCfgMaintSlot 1.3.6.1.4.1.466.6.1.11.1.1 integer read-only
The PC port to which the TyView node is attached.
                                       dsucsuCfgMaintNode 1.3.6.1.4.1.466.6.1.11.1.2 integer read-only
The node ID: unique per port ID.
                                       dsucsuCfgMaintChanType 1.3.6.1.4.1.466.6.1.11.1.3 integer read-write
The type of data passed over the Maint. port. Enumeration: 'disabled': 1, 'alarm': 4, 'ext-event': 5, 'ascii': 3, 'nsms': 2.
                                       dsucsuCfgMaintFlowCtrl 1.3.6.1.4.1.466.6.1.11.1.4 integer read-write
Flow Control for the Maint. port. Enumeration: 'on': 2, 'off': 1.
                                       dsucsuCfgMaintStopBits 1.3.6.1.4.1.466.6.1.11.1.5 integer read-write
Number of Stopbits for the Maint. port. Enumeration: 'stopbits-1-5': 2, 'stopbits-1': 1, 'stopbits-2': 3.
                                       dsucsuCfgMaintParity 1.3.6.1.4.1.466.6.1.11.1.6 integer read-write
Parity for the Maint. port. Enumeration: 'even': 3, 'none': 1, 'odd': 2.
                                       dsucsuCfgMaintDataBits 1.3.6.1.4.1.466.6.1.11.1.7 integer read-write
Databits for the Maint. port. Enumeration: 'databits-7': 1, 'databits-8': 2.
                                       dsucsuCfgMaintBaud 1.3.6.1.4.1.466.6.1.11.1.8 integer read-write
Baud rate for the Maint. port. Enumeration: 'baud-9600': 4, 'baud-4800': 3, 'baud-1200': 1, 'baud-2400': 2.
                             dsucsuCfgCommTable 1.3.6.1.4.1.466.6.1.12 no-access
Communication Port Configuration
                                   dsucsuCfgCommEntry 1.3.6.1.4.1.466.6.1.12.1 no-access
Communication Port Configuration Object
                                       dsucsuCfgCommSlot 1.3.6.1.4.1.466.6.1.12.1.1 integer read-only
The PC port to which the TyView node is attached.
                                       dsucsuCfgCommNode 1.3.6.1.4.1.466.6.1.12.1.2 integer read-only
The node ID: unique per port ID.
                                       dsucsuCfgCommChanType 1.3.6.1.4.1.466.6.1.12.1.3 integer read-write
The type of data passed over the Communication port. Enumeration: 'disabled': 1, 'alarm': 4, 'ext-event': 5, 'ascii': 3, 'nsms': 2.
                                       dsucsuCfgCommFlowCtrl 1.3.6.1.4.1.466.6.1.12.1.4 integer read-write
Flow Control for the Communication port. Enumeration: 'on': 2, 'off': 1.
                                       dsucsuCfgCommStopBits 1.3.6.1.4.1.466.6.1.12.1.5 integer read-write
Number of Stopbits for the Communication port. Enumeration: 'stopbits-1-5': 2, 'stopbits-1': 1, 'stopbits-2': 3.
                                       dsucsuCfgCommParity 1.3.6.1.4.1.466.6.1.12.1.6 integer read-write
Parity for the Communication port. Enumeration: 'even': 3, 'none': 1, 'odd': 2.
                                       dsucsuCfgCommDataBits 1.3.6.1.4.1.466.6.1.12.1.7 integer read-write
Databits for the Communication port. Enumeration: 'databits-7': 1, 'databits-8': 2.
                                       dsucsuCfgCommBaud 1.3.6.1.4.1.466.6.1.12.1.8 integer read-write
Baud rate for the Communication port. Enumeration: 'baud-9600': 4, 'baud-4800': 3, 'baud-1200': 1, 'baud-2400': 2.
                             dsucsuCfgBrdTable 1.3.6.1.4.1.466.6.1.13 no-access
Network timing for 3000N board.
                                   dsucsuCfgBrdEntry 1.3.6.1.4.1.466.6.1.13.1 no-access
Board Timing Configuration Object.
                                       dsucsuCfgBrdSlot 1.3.6.1.4.1.466.6.1.13.1.1 integer read-only
The PC port to which the TyView node is attached.
                                       dsucsuCfgBrdNode 1.3.6.1.4.1.466.6.1.13.1.2 integer read-only
The node ID: unique per port ID.
                                       dsucsuCfgBrdTiming 1.3.6.1.4.1.466.6.1.13.1.3 integer read-write
The Board Level Timing for a 3000N. Enumeration: 'port2': 3, 'port4': 5, 'master': 1, 'port3': 4, 'port1': 2.
                             dsucsuCfgDacsTable 1.3.6.1.4.1.466.6.1.14
                                   dsucsuCfgAutoAssignTable 1.3.6.1.4.1.466.6.1.14.1 no-access
Automatically assign the proper amount of bandwidth.
                                       dsucsuCfgAutoAssignEntry 1.3.6.1.4.1.466.6.1.14.1.1 no-access
DACS auto assign Configuration Object.
                                           dsucsuConnAutoSlot 1.3.6.1.4.1.466.6.1.14.1.1.1 integer read-only
The PC port to which the TyView node is attached.
                                           dsucsuConnAutoNode 1.3.6.1.4.1.466.6.1.14.1.1.2 integer read-only
The node ID: unique per port ID.
                                           dsucsuConnAutoSrcPort 1.3.6.1.4.1.466.6.1.14.1.1.3 integer read-only
Index to the 3000N source port of interest. 3000N supports two DTE-V35/RS-499 DATA ports (P3-P4).
                                           dsucsuConnAutoStartDS0 1.3.6.1.4.1.466.6.1.14.1.1.4 integer read-write
Port1/2 includes 24 DS0's. This value is the starting DS0 used by the node to allocate DS0s to meet port(3-4)-dte requirements. Sequential, contiguous DS0s are assigned. The number of DS0s required is based upon the DTE Data Rate and DTE Channel Mapping. The node's response to an entry may be gathered by querying dsucsuConnAutoStatus. To assign DS0s in a non-contiguous format, use the CfgEditConnTable. Enumeration: 'ds0-19': 19, 'ds0-18': 18, 'ds0-13': 13, 'ds0-12': 12, 'ds0-11': 11, 'ds0-10': 10, 'ds0-17': 17, 'ds0-16': 16, 'ds0-15': 15, 'ds0-14': 14, 'no-current-connections': 40, 'non-continuous-ds0s': 41, 'ds0-22': 22, 'ds0-23': 23, 'ds0-20': 20, 'ds0-21': 21, 'ds0-08': 8, 'ds0-09': 9, 'ds0-24': 24, 'ds0-04': 4, 'ds0-05': 5, 'ds0-06': 6, 'ds0-07': 7, 'ds0-01': 1, 'ds0-02': 2, 'ds0-03': 3.
                                           dsucsuConnAutoDestPort 1.3.6.1.4.1.466.6.1.14.1.1.5 integer read-write
Selects the port for which DS0s are automatically allocated to one of the T1 network ports. Node software may not allow connection of port1 to port1. Enumeration: 'not-connected': 33, 'port4': 4, 'port2': 2, 'port3': 3, 'port1': 1.
                                           dsucsuConnAutoType 1.3.6.1.4.1.466.6.1.14.1.1.6 integer read-write
Defines the type of traffic being transported. The 3000N supports data (1) or voice (2). The selected type will be assigned to all DS0s. Enumeration: 'voice': 2, 'data': 1.
                                           dsucsuConnDteRate 1.3.6.1.4.1.466.6.1.14.1.1.7 integer read-only
Data rate of the DTE port. Can be chaged from the CfgDteTable.
                                           dsucsuConnDteDensity 1.3.6.1.4.1.466.6.1.14.1.1.8 integer read-only
Channel/DS0 format for the DTE port. Can be changed from the CfgDteTable. Enumeration: 'bit-7-stuff': 56, 'clear-channel': 64.
                                           dsucsuConnDs0Required 1.3.6.1.4.1.466.6.1.14.1.1.9 integer read-only
The number of DS0s required by the node's DTE port. This is based upon the DTE data rate and channel density selections.
                                           dsucsuConnAutoStatus 1.3.6.1.4.1.466.6.1.14.1.1.10 integer read-only
Queries the node's connection status. Code will be returned when a connection set or update is rejected or accepted. Enumeration: 'start-ds0-valid': 8, 'no-current-connections': 5, 'port-type-invalid': 7, 'start-ds0-invalid': 9, 'port-invalid': 11, 'incorrect-bandwidth': 3, 'connections-valid': 1, 'port-valid': 10, 'bandwidth-conflict': 4, 'connections-not-valid': 2, 'port-type-valid': 6.
                                           dsucsuConnAutoUpdateCmd 1.3.6.1.4.1.466.6.1.14.1.1.11 integer read-write
Updates the connections with the edit buffer. The edit buffer is comprised of any changes sent (set) from the dsucsuCfgAutoAssignEntry. Enumeration: 'update': 1.
                                   dsucsuCfgCurrentConnTable 1.3.6.1.4.1.466.6.1.14.2 no-access
Retrieves node's active connections assignments for display only. To edit connections, use CfgConnAutoAssign or CfgEditConnTable.
                                       dsucsuCfgCurrentConnections 1.3.6.1.4.1.466.6.1.14.2.1 no-access
An entry in the Current Connections Table.
                                           dsucsuSlot 1.3.6.1.4.1.466.6.1.14.2.1.1 integer read-only
The PC port to which the TyView node is attached.
                                           dsucsuNode 1.3.6.1.4.1.466.6.1.14.2.1.2 integer read-only
The node ID: unique per port ID.
                                           dsucsuT1Index 1.3.6.1.4.1.466.6.1.14.2.1.3 integer read-only
Index to T1 network port of interest. The 3000N supports two NETWORK/DSX-1 ports.
                                           dsucsuDs0 1.3.6.1.4.1.466.6.1.14.2.1.4 integer read-only
DS0 number 1 through 24 corresponding to the T1 network port index.
                                           dsucsuDtePort 1.3.6.1.4.1.466.6.1.14.2.1.5 integer read-only
DS0 assignment for indexed T1 network port. After making any adjustments to the connections, the dsucsuCfgConnUpdateCmd must be sent. Node software may not permit port 1 connections to itself. Enumeration: 'not-connected': 33, 'port4': 4, 'port2': 2, 'port3': 3, 'port1': 1.
                                           dsucsuType 1.3.6.1.4.1.466.6.1.14.2.1.6 integer read-only
Defines the type of traffic being transported. The 3000N supports data (1) or voice (2). Enumeration: 'voice': 2, 'data': 1.
                                   dsucsuCfgEditConnTable 1.3.6.1.4.1.466.6.1.14.3 no-access
Manually assign the proper amount of bandwidth.
                                       dsucsuCfgEditConnEntry 1.3.6.1.4.1.466.6.1.14.3.1 no-access
Edits current DS0 assignment. After making any adjustments to the connections, the dsucsuCfgConnUpdateCmd must be sent.
                                           dsucsuConnSlot 1.3.6.1.4.1.466.6.1.14.3.1.1 integer read-only
The PC port to which the TyView node is attached.
                                           dsucsuConnNode 1.3.6.1.4.1.466.6.1.14.3.1.2 integer read-only
The node ID: unique per port ID.
                                           dsucsuConnSrcPort 1.3.6.1.4.1.466.6.1.14.3.1.3 integer read-only
Index to the source port of interest. The 3000N supports two NETWORK/DSX-1 and two DTE ports.
                                           dsucsuConnSrcDs0 1.3.6.1.4.1.466.6.1.14.3.1.4 integer read-only
The source DS0 number 1 through 24 corresponding to the T1 network port index
                                           dsucsuConnDestPort 1.3.6.1.4.1.466.6.1.14.3.1.5 integer read-write
Index to the destination port of interest. The 3000N supports two NETWORK/DSX-1 and two DTE ports. Enumeration: 'not-connected': 33, 'port4': 4, 'port2': 2, 'port3': 3, 'port1': 1.
                                           dsucsuConnDestDs0 1.3.6.1.4.1.466.6.1.14.3.1.6 integer read-write
DS0 assignment for indexed T1 network port. After making any adjustments to the connections, the dsucsuConnUpdateCmd must be sent. Node software may not permit connections between the same port and itself. Enumeration: 'ds0-19': 19, 'ds0-18': 18, 'ds0-13': 13, 'ds0-12': 12, 'ds0-11': 11, 'ds0-10': 10, 'ds0-17': 17, 'ds0-16': 16, 'ds0-15': 15, 'ds0-14': 14, 'no-current-connections': 40, 'non-continuous-ds0s': 41, 'ds0-22': 22, 'ds0-23': 23, 'ds0-20': 20, 'ds0-21': 21, 'ds0-08': 8, 'ds0-09': 9, 'ds0-24': 24, 'ds0-04': 4, 'ds0-05': 5, 'ds0-06': 6, 'ds0-07': 7, 'ds0-01': 1, 'ds0-02': 2, 'ds0-03': 3.
                                           dsucsuConnType 1.3.6.1.4.1.466.6.1.14.3.1.7 integer read-write
Defines the type of traffic being transported. The 3000N supports data (1) or voice (2). Enumeration: 'voice': 2, 'data': 1.
                                           dsucsuConnNumDs0s 1.3.6.1.4.1.466.6.1.14.3.1.8 integer read-write
The total number of Ds0s to be connected. The number of Ds0s must be between 1 and 24.
                                           dsucsuConnSetStatus 1.3.6.1.4.1.466.6.1.14.3.1.9 integer read-only
Displays node status from the last SNMP issed set command. Enumeration: 'no-current-connections': 5, 'port-type-invalid': 7, 'destination-ds0-invalid': 9, 'num-ds0s-valid': 12, 'port-invalid': 11, 'incorrect-bandwidth': 3, 'connections-valid': 1, 'port-valid': 10, 'bandwidth-conflict': 4, 'num-ds0s-invalid': 13, 'connections-not-valid': 2, 'port-type-valid': 6, 'destination-ds0-valid': 8.
                                           dsucsuConnConnect 1.3.6.1.4.1.466.6.1.14.3.1.10 integer read-write
Updates the connections with the edit buffer. The edit buffer is comprised of any changes sent (set) from the CfgEditConnTable. Enumeration: 'disconnect': 2, 'connect': 1.
                                           dsucsuConnUpdateRequired 1.3.6.1.4.1.466.6.1.14.3.1.11 integer read-only
Displays node status from the last connection update. Enumeration: 'update-not-required': 1, 'update-required': 2.
                                           dsucsuConnUpdateCmd 1.3.6.1.4.1.466.6.1.14.3.1.12 integer read-write
Sends the updated connections from the edit buffer to the node. The edit buffer is comprised of any changes sent (set) from the CfgEditConnTable. Enumeration: 'update': 1.
                                           dsucsuConnClearEditBuff 1.3.6.1.4.1.466.6.1.14.3.1.13 integer read-write
Removes all changes from edit buffer. The edit buffer is comprised of any changes sent (set) from the CfgEditConnTable. Enumeration: 'clear-edit': 1.
                             dsucsuDiagNetTable 1.3.6.1.4.1.466.6.1.15 no-access
A list of Network Diagnostic attributes. Loopbacks, tests and their respective results can be initiated, cancelled and examined.
                                   dsucsuDiagNetEntry 1.3.6.1.4.1.466.6.1.15.1 no-access
A Network Diagnostic entry
                                       dsucsuDiagNetSlot 1.3.6.1.4.1.466.6.1.15.1.1 integer read-only
The PC port to which the TyView node is attached.
                                       dsucsuDiagNetNode 1.3.6.1.4.1.466.6.1.15.1.2 integer read-only
The node ID: unique per port ID.
                                       dsucsuDiagNetIndex 1.3.6.1.4.1.466.6.1.15.1.3 integer read-only
The network number to be examined for a particular node (3000N only).
                                       dsucsuDiagNetLclNetAggLpbk 1.3.6.1.4.1.466.6.1.15.1.4 integer read-write
Enables the operator to control and examine the local aggregate loopback. This loopback occurs on the net side of the local transmit and receive logic. The unit continues to transmit data across the network and also loops the data back to its own receiver circuitry. Enumeration: 'enableLoopbackMode': 1, 'notApplicable': 3, 'disableLoopbackMode': 2.
                                       dsucsuDiagNetLclNetLpbk 1.3.6.1.4.1.466.6.1.15.1.5 integer read-write
Enables the operator to control and examine the local network loopback. This loopback allows the operator to disconnect the side of the network by transmitting the data recovered from the network. Enumeration: 'enableLoopbackMode': 1, 'notApplicable': 3, 'disableLoopbackMode': 2.
                                       dsucsuDiagNetLclNetPayload 1.3.6.1.4.1.466.6.1.15.1.6 integer read-write
Enables the operator to control and examine the network payload loopback. This loopback occurs on the net side of the local transmit and receive logic. The unit continues to transmit data across the network and also loops the data back to its own receiver circuitry. Enumeration: 'enableLoopbackMode': 1, 'notApplicable': 3, 'disableLoopbackMode': 2.
                                       dsucsuDiagNetLclNetBiDir 1.3.6.1.4.1.466.6.1.15.1.7 integer read-write
Enables the operator to control and examine the local network loopback. This loopback allows the operator to disconnect the side of the network by transmitting the data recovered from the network in both directions. Enumeration: 'enableLoopbackMode': 1, 'notApplicable': 3, 'disableLoopbackMode': 2.
                                       dsucsuDiagNetRemCsuLpbk 1.3.6.1.4.1.466.6.1.15.1.8 integer read-write
Enables the operator to control and examine the remote CSU loopback. This loopback allows the operator to test the operation of the local channel, the aggregate and the remote CSU. Enumeration: 'notApplicable': 3, 'transmitLoopUpCode': 1, 'transmitLoopDownCode': 2.
                                       dsucsuDiagNetRemDsuLpbk 1.3.6.1.4.1.466.6.1.15.1.9 integer read-write
Enables the operator to control and examine the remote aggregate loopback. This loopback allows the operator to test the entire system from the local unit through the network to the remote node's transmit and receive front end. Enumeration: 'enableLoopbackMode': 1, 'notApplicable': 3, 'disableLoopbackMode': 2.
                                       dsucsuDiagNetEvElapTime 1.3.6.1.4.1.466.6.1.15.1.10 timeticks read-only
The time elapsed since the Event Test started. The new Event Test commences as soon as the previous Event Test registers are cleared.
                                       dsucsuDiagNetEvCRC6Err 1.3.6.1.4.1.466.6.1.15.1.11 counter read-only
The number of CRC6 errors encountered during the Event Test period.
                                       dsucsuDiagNetEvOofErr 1.3.6.1.4.1.466.6.1.15.1.12 counter read-only
The number of Out-Of-Frame errors encountered during the Event Test period.
                                       dsucsuDiagNetErrEvents 1.3.6.1.4.1.466.6.1.15.1.13 counter read-only
The number of Errored Events encountered during the Event Test period.
                                       dsucsuDiagNetClearEvReg 1.3.6.1.4.1.466.6.1.15.1.14 integer read-write
Clear all the Event Test registers. Automatically initiates a new Event Test. Enumeration: 'clearRegister': 1.
                             dsucsuDiagDteTable 1.3.6.1.4.1.466.6.1.16 no-access
A list of DTE channel diagnostics.
                                   dsucsuDiagDteEntry 1.3.6.1.4.1.466.6.1.16.1 no-access
A DTE channel diagnostic entry
                                       dsucsuDiagDteSlot 1.3.6.1.4.1.466.6.1.16.1.1 integer read-only
The PC port to which the TyView node is attached.
                                       dsucsuDiagDteNode 1.3.6.1.4.1.466.6.1.16.1.2 integer read-only
The node ID: unique per port ID.
                                       dsucsuDiagDteIndex 1.3.6.1.4.1.466.6.1.16.1.3 integer read-only
The channel number to be examined for a particular node.
                                       dsucsuDiagDteLocalBiDir 1.3.6.1.4.1.466.6.1.16.1.4 integer read-write
This selection displays the status or controls the Local Channel Loopback for the selected channel. This is a local turnaround and is bi-directional. Enumeration: 'enableLoopbackMode': 1, 'notApplicable': 3, 'disableLoopbackMode': 2.
                                       dsucsuDiagDteLocalPayload 1.3.6.1.4.1.466.6.1.16.1.5 integer read-write
This selection displays the status or controls the Local Payload Channel Loopback for the selected channel. Enumeration: 'enableLoopbackMode': 1, 'notApplicable': 3, 'disableLoopbackMode': 2.
                                       dsucsuDiagDteRemLpbk 1.3.6.1.4.1.466.6.1.16.1.6 integer read-write
This selection displays the status or controls the Channel Remote Loopback for the selected channel. This loopback transmits a code to the remote node which will enable or disable a diagnostic loopback at the addressed channel. Enumeration: 'enableLoopbackMode': 1, 'notApplicable': 3, 'disableLoopbackMode': 2.
                                       dsucsuDiagDteBertTestAct 1.3.6.1.4.1.466.6.1.16.1.7 integer read-write
BERT test related actions: a: Starts a BERT test on a channel, b: Stops a BERT test on a channel, c: Inject Errors while the BERT test is running, d: Clears BERT test errors. Enumeration: 'startBertTest': 1, 'injectErrorBertTest': 3, 'clearErrorBertTest': 4, 'stopBertTest': 2.
                                       dsucsuDiagDteBertHourStrt 1.3.6.1.4.1.466.6.1.16.1.8 integer read-only
Displays the hour that the BERT test started.
                                       dsucsuDiagDteBertMinStrt 1.3.6.1.4.1.466.6.1.16.1.9 integer read-only
Displays th minute that BERT test started.
                                       dsucsuDiagDteBertTimeElaps 1.3.6.1.4.1.466.6.1.16.1.10 timeticks read-only
Elapsed time since the BERT Test started
                                       dsucsuDiagDteBertErrors 1.3.6.1.4.1.466.6.1.16.1.11 counter read-only
Number of BERT test errors encountered during the BERT Test.
                             dsucsuDiagFrmTable 1.3.6.1.4.1.466.6.1.17 no-access
A list of framed channel diagnostics.
                                   dsucsuDiagFrmEntry 1.3.6.1.4.1.466.6.1.17.1 no-access
A framed channel diagnostic entry
                                       dsucsuDiagFrmSlot 1.3.6.1.4.1.466.6.1.17.1.1 integer read-only
The PC port to which the TyView node is attached.
                                       dsucsuDiagFrmNode 1.3.6.1.4.1.466.6.1.17.1.2 integer read-only
The node ID: unique per port ID.
                                       dsucsuDiagFrmIndex 1.3.6.1.4.1.466.6.1.17.1.3 integer read-only
The channel number to be examined for a particular node.
                                       dsucsuDiagFrmLclLpbk 1.3.6.1.4.1.466.6.1.17.1.4 integer read-write
This selection displays the status or controls the Local Channel Loopback for the selected channel. This is a local turnaround and is bi-directional. Enumeration: 'enableLoopbackMode': 1, 'notApplicable': 3, 'disableLoopbackMode': 2.
                                       dsucsuDiagFrmLclPayload 1.3.6.1.4.1.466.6.1.17.1.5 integer read-write
This selection displays the status or controls the Channel Remote Loopback for the selected channel. This loopback transmits a code to the remote node which will enable or disable a diagnostic loopback at the addressed channel. This selection is applicable only for DSX type channels. Enumeration: 'enableLoopbackMode': 1, 'notApplicable': 3, 'disableLoopbackMode': 2.
                                       dsucsuDiagFrmLclBiDir 1.3.6.1.4.1.466.6.1.17.1.6 integer read-write
This selection displays the status or controls the DSX Loopback for the selected channel. This selection is applicable only for DSX channels. Enumeration: 'enableLoopbackMode': 1, 'notApplicable': 3, 'disableLoopbackMode': 2.
                                       dsucsuDiagFrmRemLpbk 1.3.6.1.4.1.466.6.1.17.1.7 integer read-write
This selection displays the status or controls the Local Channel Loopback for the selected channel. This loopback transmits a code to the remote node which will enable or disable a diagnostic loopback at the addressed channel. This selection is applicable only for DSX channels. Enumeration: 'notApplicable': 3, 'transmitLoopUpCode': 1, 'transmitLoopDownCode': 2.
                                       dsucsuDiagFrmLclDte 1.3.6.1.4.1.466.6.1.17.1.8 integer read-write
This selection displays the status or controls the Local Channel Loopback for the selected channel. This is a local turnaround and is bi-directional. This selection is applicable only for CSU type channels. Enumeration: 'enableLoopbackMode': 1, 'notApplicable': 3, 'disableLoopbackMode': 2.
                                       dsucsuDiagFrmLclDte2 1.3.6.1.4.1.466.6.1.17.1.9 integer read-write
This selection displays the status or controls the Channel Remote Loopback for the selected channel. This loopback transmits a code to the remote node which will enable or disable a diagnostic loopback at the addressed channel. This selection is applicable only for CSU type channels. Enumeration: 'enableLoopbackMode': 1, 'notApplicable': 3, 'disableLoopbackMode': 2.
                                       dsucsuDiagFrmBertTestAct 1.3.6.1.4.1.466.6.1.17.1.10 integer read-write
BERT test related actions: a: Starts a BERT test on a channel, b: Stops a BERT test on a channel, c: Inject Errors while the BERT test is running, d: Clears BERT test errors. Enumeration: 'startBertTest': 1, 'injectErrorBertTest': 3, 'clearErrorBertTest': 4, 'stopBertTest': 2.
                                       dsucsuDiagFrmEvElapTime 1.3.6.1.4.1.466.6.1.17.1.11 timeticks read-only
The time elapsed since the PBX Event Test started. This selection is applicable only for PBX channels.
                                       dsucsuDiagFrmEvBpvErr 1.3.6.1.4.1.466.6.1.17.1.12 counter read-only
The number of Bipolar Violations encountered during the Event Test. This selection is applicable only for PBX channels.
                                       dsucsuDiagFrmEvOofErr 1.3.6.1.4.1.466.6.1.17.1.13 counter read-only
The number of Out-Of-Frame Errors encountered during the Event Test. This selection is applicable only for PBX channels.
                                       dsucsuDiagFrmFrameErr 1.3.6.1.4.1.466.6.1.17.1.14 counter read-only
The number of Frame Errors encountered during the Event Test. This selection is applicable only for PBX channels.
                                       dsucsuDiagFrmClearEvReg 1.3.6.1.4.1.466.6.1.17.1.15 integer read-write
Clears all the PBX Event Test registers. This selection is applicable only for PBX channels. Enumeration: 'clearRegister': 1.
                             dsucsuDiagAuxTable 1.3.6.1.4.1.466.6.1.18 no-access
Auxillary Channel Diagnostics
                                   dsucsuDiagAuxEntry 1.3.6.1.4.1.466.6.1.18.1 no-access
Auxilary diagnostic entry
                                       dsucsuDiagAuxSlot 1.3.6.1.4.1.466.6.1.18.1.1 integer read-only
The PC port to which the TyView node is attached.
                                       dsucsuDiagAuxNode 1.3.6.1.4.1.466.6.1.18.1.2 integer read-only
The node ID: unique per port ID.
                                       dsucsuDiagAuxChAStatus 1.3.6.1.4.1.466.6.1.18.1.3 integer read-only
Status of Supervisory link channel A. Enumeration: 'down': 1, 'off': 3, 'sync': 2.
                                       dsucsuDiagAuxChBStatus 1.3.6.1.4.1.466.6.1.18.1.4 integer read-only
Status of Supervisory Link Channel B. Enumeration: 'down': 1, 'off': 3, 'sync': 2.
                                       dsucsuDiagAuxFdlStatus 1.3.6.1.4.1.466.6.1.18.1.5 integer read-only
Status of Facility Data Link (PORT1). Enumeration: 'down': 1, 'off': 3, 'sync': 2.
                                       dsucsuDiagAuxFdl2Status 1.3.6.1.4.1.466.6.1.18.1.6 integer read-only
Status of Facility Data Link (PORT2). Enumeration: 'down': 1, 'off': 3, 'sync': 2.
                                       dsucsuDiagAuxMaintStatus 1.3.6.1.4.1.466.6.1.18.1.7 integer read-only
The Maint. Port Supervisory link status. Enumeration: 'down': 1, 'off': 3, 'sync': 2.
                                       dsucsuDiagAuxCommStatus 1.3.6.1.4.1.466.6.1.18.1.8 integer read-only
The Communications port Supervisory link status. Enumeration: 'down': 1, 'off': 3, 'sync': 2.
                             dsucsuDiagPortTable 1.3.6.1.4.1.466.6.1.19 no-access
Port Specific Display only Diagnostics
                                   dsucsuDiagPortEntry 1.3.6.1.4.1.466.6.1.19.1 no-access
Port Specific Display only entry
                                       dsucsuDiagPortSlot 1.3.6.1.4.1.466.6.1.19.1.1 integer read-only
The PC port to which the TyView node is attached.
                                       dsucsuDiagPortNode 1.3.6.1.4.1.466.6.1.19.1.2 integer read-only
The node ID: unique per port ID.
                                       dsucsuDiagPortIndex 1.3.6.1.4.1.466.6.1.19.1.3 integer read-only
The port index: unique per port.
                                       dsucsuDiagPortType 1.3.6.1.4.1.466.6.1.19.1.4 integer read-only
The port type (NET/DSX/PBX/V.35/RS-449). Enumeration: 'none': 1, 'network': 2, 'dsx': 3, 'pbx': 4, 'dte': 9, 'mil188': 7, 'tdm': 10, 'rs449': 5, 'rs232': 6, 'v35': 8.
                                       dsucsuDiagPortStatus 1.3.6.1.4.1.466.6.1.19.1.5 integer read-only
Current status condition of a particular port. Enumeration: 'bpvAlarm': 5, 'redAlarm': 2, 'clearOK': 1, 'yellowAlarm': 3, 'notApplicable': 9, 'blueAlarm': 6, 'timeout': 8, 'test': 7, 'syncLoss': 4.
                             dsucsuIntervalTable 1.3.6.1.4.1.466.6.1.20 no-access
The table contains various ESF stats collected over the last 96 15-minute intervals (24 hours total time).
                                   dsucsuIntervalEntry 1.3.6.1.4.1.466.6.1.20.1 no-access
Entry in the table of ESF interval stats.
                                       dsucsuIntervalSlot 1.3.6.1.4.1.466.6.1.20.1.1 integer read-only
The PC port to which the TyView node is attached.
                                       dsucsuIntervalNode 1.3.6.1.4.1.466.6.1.20.1.2 integer read-only
The node ID: unique per port ID.
                                       dsucsuIntervalPort 1.3.6.1.4.1.466.6.1.20.1.3 integer read-only
The port index: unique per port.
                                       dsucsuIntervalNum 1.3.6.1.4.1.466.6.1.20.1.4 integer read-only
The sequence number for the selected interval.
                                       dsucsuIntervalESs 1.3.6.1.4.1.466.6.1.20.1.5 counter read-only
The number of Errored Seconds (as defined in Bell Publication 62411) encountered in the user registers during the selected interval.
                                       dsucsuIntervalSESs 1.3.6.1.4.1.466.6.1.20.1.6 counter read-only
The number of Severely Errored Seconds (as defined in Bell Publication 62411) encountered in the user registers during the selected interval.
                                       dsucsuIntervalBPVs 1.3.6.1.4.1.466.6.1.20.1.7 counter read-only
The number of Bipolar Violations (as defined in Bell Publication 62411) encountered in the user registers during the selected interval.
                                       dsucsuIntervalFSs 1.3.6.1.4.1.466.6.1.20.1.8 counter read-write
The number of Failed Seconds (as defined in Bell Publication 62411) encountered in the user registers during the selected interval.
                             dsucsuCurrentTable 1.3.6.1.4.1.466.6.1.22 no-access
The table contains various ESF stats collected over the current 15-minute interval.
                                   dsucsuCurrentEntry 1.3.6.1.4.1.466.6.1.22.1 no-access
Entry in the table of the current ESF stats.
                                       dsucsuCurrentSlot 1.3.6.1.4.1.466.6.1.22.1.1 integer read-only
The PC port to which the TyView node is attached.
                                       dsucsuCurrentNode 1.3.6.1.4.1.466.6.1.22.1.2 integer read-only
The node ID: unique per port ID.
                                       dsucsuCurrentPort 1.3.6.1.4.1.466.6.1.22.1.3 integer read-only
The port index: unique per port.
                                       dsucsuCurrentESs 1.3.6.1.4.1.466.6.1.22.1.4 counter read-only
The number of Errored Seconds (as defined in Bell Publication 62411) encountered in the user registers during the current 15 minute interval.
                                       dsucsuCurrentSESs 1.3.6.1.4.1.466.6.1.22.1.5 counter read-only
The number of Severely Errored Seconds (as defined in Bell Publication 62411) encountered in the user registers during the current 15 minute interval.
                                       dsucsuCurrentBPVs 1.3.6.1.4.1.466.6.1.22.1.6 counter read-only
The number of Bipolar Violations (as defined in Bell Publication 62411) encountered in the user registers during the current 15 minute interval.
                                       dsucsuCurrentSECs 1.3.6.1.4.1.466.6.1.22.1.7 counter read-only
Number of seconds elapsed in the current 15 minute interval.
                                       dsucsuCurrentStatus 1.3.6.1.4.1.466.6.1.22.1.8 integer read-write
Indication of whether statistics have been halted during current 15 minute interval. Enumeration: 'frozen': 1, 'unfrozen': 2.
                             dsucsuTotalTable 1.3.6.1.4.1.466.6.1.24 no-access
The table contains the cummulative sum of various ESF stats collected over the last 24 hour period.
                                   dsucsuTotalEntry 1.3.6.1.4.1.466.6.1.24.1 no-access
Entry in the table of the total ESF stats.
                                       dsucsuTotalSlot 1.3.6.1.4.1.466.6.1.24.1.1 integer read-only
The PC port to which the TyView node is attached.
                                       dsucsuTotalNode 1.3.6.1.4.1.466.6.1.24.1.2 integer read-only
The node ID: unique per port ID.
                                       dsucsuTotalPort 1.3.6.1.4.1.466.6.1.24.1.3 integer read-only
The port index: unique per port.
                                       dsucsuTotalESs 1.3.6.1.4.1.466.6.1.24.1.4 counter read-only
The number of Errored Seconds (as defined in Bell Publication 62411) encountered in the user registers in the last 24 hour period (96 intervals).
                                       dsucsuTotalSESs 1.3.6.1.4.1.466.6.1.24.1.5 counter read-only
The number of Severely Errored Seconds (as defined in Bell Publication 62411) encountered in the user registers in the last 24 hour period (96 intervals).
                                       dsucsuTotalBPVs 1.3.6.1.4.1.466.6.1.24.1.6 counter read-only
The number of Bipolar Violations (as defined in Bell Publication 62411) encountered in the user registers in the last 24 hour period (96 intervals).
                                       dsucsuTotalSECs 1.3.6.1.4.1.466.6.1.24.1.7 counter read-only
Number of seconds elapsed in the last 24 hours. This will be the maximum value of 86400 unless the addressed node was brought on-line with the this period.
                                       dsucsuTotalStatus 1.3.6.1.4.1.466.6.1.24.1.8 integer read-write
Indication of whether statistics have been halted in the last 24 hours. Enumeration: 'frozen': 1, 'unfrozen': 2.
                             dsucsuAlarmType 1.3.6.1.4.1.466.6.1.25 integer read-only
The type of alarms that are generated on the node Enumeration: 'node-communications-lost': 14, 'port2-Bpv-Alarm-Clear': 51, 'pbx1-Red-Alarm': 8, 'sync-ais-Alarm': 15, 'port2-Bpv-Alarm': 25, 'remote-ts16-Alarm-Clear': 45, 'pbx1-Yellow-Alarm-Clear': 33, 'pbx3-Yellow-Alarm-Clear': 36, 'red-Alarm-Clear': 31, 'remote-ts16-Alarm': 19, 'port2-Sync-Alarm-Clear': 49, 'red-Alarm': 3, 'bpv-Alarm': 4, 'remote-Alarm-Clear': 44, 'ts16-Los-Alarm': 17, 'yellow-Alarm-Clear': 29, 'confg-Stored': 6, 'crc4-Error-Alarm-Clear': 47, 'ais-Alarm': 13, 'port2-Red-Alarm-Clear': 50, 'confg-Activated': 5, 'port2-Yellow-Alarm': 22, 'port2-Yellow-Alarm-Clear': 48, 'node-communications-restored': 40, 'frame-Error-Alarm-Clear': 46, 'frame-Error-Alarm': 20, 'port2-Red-Alarm': 24, 'fan-one-Failure': 27, 'sync-ais-Alarm-Clear': 41, 'pbx1-Los-Alarm-Clear': 35, 'fan-two-Failure': 28, 'sync-Alarm-Clear': 30, 'sync-Alarm': 2, 'yellow-Alarm': 1, 'ts16-ais-Alarm-Clear': 42, 'remote-Alarm': 18, 'crc4-Error-Alarm': 21, 'ts16-Los-Alarm-Clear': 43, 'power-Supply-Alarm-Clear': 52, 'power-Supply-Alarm': 26, 'pbx3-Los-Alarm-Clear': 38, 'bpv-Alarm-Clear': 32, 'port2-Sync-Alarm': 23, 'pbx3-Red-Alarm-Clear': 37, 'pbx1-Red-Alarm-Clear': 34, 'ts16-ais-Alarm': 16, 'fan-one-Failure-Clear': 53, 'fan-two-Failure-Clear': 54, 'pbx3-Los-Alarm': 12, 'pbx3-Yellow-Alarm': 10, 'pbx1-Los-Alarm': 9, 'pbx1-Yellow-Alarm': 7, 'pbx3-Red-Alarm': 11, 'ais-Alarm-Clear': 39.
                             dsucsuAlarmSlot 1.3.6.1.4.1.466.6.1.26 integer read-only
The PC port to which the TyView node is attached.
                             dsucsuAlarmNode 1.3.6.1.4.1.466.6.1.27 integer read-only
The node ID: unique per port ID.
                             dsucsuAlarmName 1.3.6.1.4.1.466.6.1.28 displaystring read-only
The name of the node which triggered the alarm.
                         tyview 1.3.6.1.4.1.466.6.2
                             tyviewSysTable 1.3.6.1.4.1.466.6.2.1
                                 tyviewSysRevSw 1.3.6.1.4.1.466.6.2.1.1 displaystring read-only
The TyView software revision.
                                 tyviewSysName 1.3.6.1.4.1.466.6.2.1.2 displaystring read-write
The name given to TyView system.
                                 tyviewSysId 1.3.6.1.4.1.466.6.2.1.3 integer read-only
The TyView system ID.
                                 tyviewSysTimeOutFactor 1.3.6.1.4.1.466.6.2.1.4 integer read-write
The TyView timeout factor.
                                 tyviewSysObjectId 1.3.6.1.4.1.466.6.2.1.5 displaystring read-write
The Tyview Domain Object Identifier.
                                 tyviewSysSlotNumber 1.3.6.1.4.1.466.6.2.1.6 integer read-only
The Physical Slot Number the NETEXEC is installed in.
                                 tyviewSysClearDatabase 1.3.6.1.4.1.466.6.2.1.7 integer read-write
Clear the node database. Enumeration: 'clearDatabase': 1.
                                 tyviewSysGetCommName 1.3.6.1.4.1.466.6.2.1.8 displaystring read-write
The GET community name.
                                 tyviewSysSetCommName 1.3.6.1.4.1.466.6.2.1.9 displaystring read-write
The SET community name.
                                 tyviewSysTrapCommName 1.3.6.1.4.1.466.6.2.1.10 displaystring read-write
The TRAP community name.
                                 tyviewSysN1TrapDest 1.3.6.1.4.1.466.6.2.1.11 displaystring read-write
The first Trap IP Destination.
                                 tyviewSysN2TrapDest 1.3.6.1.4.1.466.6.2.1.12 displaystring read-write
The second Trap IP Destination.
                                 tyviewSysDate 1.3.6.1.4.1.466.6.2.1.13 displaystring read-write
The NETEXEC date (mm/dd/yy).
                                 tyviewSysTime 1.3.6.1.4.1.466.6.2.1.14 displaystring read-write
The NETEXEC time (hh:mm).
                                 tyviewSysMjrMnrLED 1.3.6.1.4.1.466.6.2.1.15 integer read-only
The Major/Minor LED status. Enumeration: 'led-Off': 1, 'led-Green': 3, 'led-Red': 2, 'led-RedYellow': 5, 'led-Yellow': 4.
                                 tyviewSysFanPSLED 1.3.6.1.4.1.466.6.2.1.16 integer read-only
The Fan / Power Supply LED status. Enumeration: 'led-Off': 1, 'led-Green': 3, 'led-Red': 2, 'led-RedYellow': 5, 'led-Yellow': 4.
                                 tyviewSysCtlrLED 1.3.6.1.4.1.466.6.2.1.17 integer read-only
The Controller LED status. Enumeration: 'led-Off': 1, 'led-Green': 3, 'led-Red': 2, 'led-RedYellow': 5, 'led-Yellow': 4.
                                 tyviewSysSlipLED 1.3.6.1.4.1.466.6.2.1.18 integer read-only
The SLIP LED status. Enumeration: 'led-Off': 1, 'led-Green': 3, 'led-Red': 2, 'led-RedYellow': 5, 'led-Yellow': 4.
                                 tyviewSysCtlChLED 1.3.6.1.4.1.466.6.2.1.19 integer read-only
The Control Channel LED status. Enumeration: 'led-Off': 1, 'led-Green': 3, 'led-Red': 2, 'led-RedYellow': 5, 'led-Yellow': 4.
                                 tyviewSysTDMLED 1.3.6.1.4.1.466.6.2.1.20 integer read-only
The TDM LED status. Enumeration: 'led-Off': 1, 'led-Green': 3, 'led-Red': 2, 'led-RedYellow': 5, 'led-Yellow': 4.
                                 tyviewSysMaintUseage 1.3.6.1.4.1.466.6.2.1.21 integer read-write
The Maintenance Port useage specification. Enumeration: 'tp-modem': 4, 'none': 1, 'diagnostic': 5, 'ppp': 6, 'command': 2, 'slip': 3.
                                 tyviewSysMaintDataBits 1.3.6.1.4.1.466.6.2.1.22 integer read-write
The Maintenance Port databits specification. Enumeration: 'databits-7': 1, 'databits-8': 2.
                                 tyviewSysMaintRate 1.3.6.1.4.1.466.6.2.1.23 integer read-write
The Maintenance Port rate specification. Enumeration: 'rate-2400': 2, 'rate-4800': 3, 'rate-9600': 4, 'rate-19200': 5, 'rate-1200': 1.
                                 tyviewSysMaintStopBits 1.3.6.1.4.1.466.6.2.1.24 integer read-write
The Maintenance Port stopbits specification. Enumeration: 'stopbits-1': 1, 'stopbits-2': 2.
                                 tyviewSysMaintParity 1.3.6.1.4.1.466.6.2.1.25 integer read-write
The Maintenance Port parity specification. Enumeration: 'even': 3, 'none': 1, 'odd': 2.
                                 tyviewSysMaintMtu 1.3.6.1.4.1.466.6.2.1.26 integer read-write
The Maintenance Port maximum trans unit size.
                                 tyviewSysMaintCompression 1.3.6.1.4.1.466.6.2.1.27 integer read-write
The Maintenance Port compression specification. Enumeration: 'on': 2, 'off': 1.
                                 tyviewSysMaintSubnetMask 1.3.6.1.4.1.466.6.2.1.28 displaystring read-write
The Maintenance Port subnet mask.
                                 tyviewSysMaintLocalIP 1.3.6.1.4.1.466.6.2.1.29 displaystring read-write
The Maintenance Port local IP address.
                                 tyviewSysMaintPeerIP 1.3.6.1.4.1.466.6.2.1.30 displaystring read-write
The Maintenance Port peer IP address.
                                 tyviewSysComUseage 1.3.6.1.4.1.466.6.2.1.31 integer read-write
The Com Port useage specification. Enumeration: 'tp-modem': 4, 'none': 1, 'diagnostic': 5, 'ppp': 6, 'command': 2, 'slip': 3.
                                 tyviewSysComDataBits 1.3.6.1.4.1.466.6.2.1.32 integer read-write
The Com Port databits specification. Enumeration: 'databits-7': 1, 'databits-8': 2.
                                 tyviewSysComRate 1.3.6.1.4.1.466.6.2.1.33 integer read-write
The Com Port rate specification. Enumeration: 'rate-2400': 2, 'rate-4800': 3, 'rate-9600': 4, 'rate-19200': 5, 'rate-1200': 1.
                                 tyviewSysComStopBits 1.3.6.1.4.1.466.6.2.1.34 integer read-write
The Com Port stopbits specification. Enumeration: 'stopbits-1': 1, 'stopbits-2': 2.
                                 tyviewSysComParity 1.3.6.1.4.1.466.6.2.1.35 integer read-write
The Com Port parity specification. Enumeration: 'even': 3, 'none': 1, 'odd': 2.
                                 tyviewSysComMtu 1.3.6.1.4.1.466.6.2.1.36 integer read-write
The Com Port maximum trans unit size.
                                 tyviewSysComCompression 1.3.6.1.4.1.466.6.2.1.37 integer read-write
The Com Port compression specification. Enumeration: 'on': 2, 'off': 1.
                                 tyviewSysComSubnetMask 1.3.6.1.4.1.466.6.2.1.38 displaystring read-write
The Com Port subnet mask.
                                 tyviewSysComLocalIP 1.3.6.1.4.1.466.6.2.1.39 displaystring read-write
The Com Port local IP address.
                                 tyviewSysComPeerIP 1.3.6.1.4.1.466.6.2.1.40 displaystring read-write
The Com Port peer IP address.
                                 tyviewSysTelnetEna 1.3.6.1.4.1.466.6.2.1.41 integer read-write
The Telnet log-in enable. Enumeration: 'disabled': 1, 'enabled': 2.
                                 tyviewSysTelnetTO 1.3.6.1.4.1.466.6.2.1.42 integer read-write
The Telnet auto-logout timeout (minutes).
                                 tyviewSysClrMjrMin 1.3.6.1.4.1.466.6.2.1.43 integer read-write
Clear major/minor alarm window / LED. Enumeration: 'clearMajorMinor': 1.
                             tyviewDatabaseTable 1.3.6.1.4.1.466.6.2.2 no-access
A list of tyview database entries.
                                 tyviewDatabaseEntry 1.3.6.1.4.1.466.6.2.2.1 no-access
System Object for TyView Database
                                     tyviewDatabaseSlot 1.3.6.1.4.1.466.6.2.2.1.1 integer read-only
The PC port to which the node is attached.
                                     tyviewDatabaseNode 1.3.6.1.4.1.466.6.2.2.1.2 integer read-only
The node ID: unique per port ID.
                                     tyviewDatabaseName 1.3.6.1.4.1.466.6.2.2.1.3 displaystring read-write
The unique name of the node.
                                     tyviewDatabaseStatus 1.3.6.1.4.1.466.6.2.2.1.4 integer read-only
The last comm status. Enumeration: 'ok': 1, 'timeout': 2, 'error': 3.
                             tyviewBroadcastTable 1.3.6.1.4.1.466.6.2.3
                                 tyviewBroadcastSetTime 1.3.6.1.4.1.466.6.2.3.1 integer read-write
Broadcast the time to all nodes. Enumeration: 'setTime': 1.
                                 tyviewBroadcastForwardAlarms 1.3.6.1.4.1.466.6.2.3.2 integer read-write
Broadcast alarm forwarding. Enumeration: 'forwardAlarms': 1.
                                 tyviewBroadcastClearLoopbacks 1.3.6.1.4.1.466.6.2.3.3 integer read-write
Broadcast Clearing of loopbacks. Enumeration: 'clearChanLoopbacks': 2, 'clearNetLoopbacks': 1.
                             tyviewTPTable 1.3.6.1.4.1.466.6.2.4 no-access
A list of Threshold Processing records.
                                 tyviewTPEntry 1.3.6.1.4.1.466.6.2.4.1 no-access
System Object for Threshold Processing
                                     tyviewTPRecord 1.3.6.1.4.1.466.6.2.4.1.1 integer read-only
The Threshold Processing record referenced.
                                     tyviewTPMonNodeMode 1.3.6.1.4.1.466.6.2.4.1.2 integer read-write
The mode used for monitoring nodes. Enumeration: 'node-specific': 3, 'none': 1, 'all-nodes': 2.
                                     tyviewTPNode 1.3.6.1.4.1.466.6.2.4.1.3 displaystring read-write
The node name for node-specific monitoring.
                                     tyviewTPAlarmType 1.3.6.1.4.1.466.6.2.4.1.4 integer read-write
The alarm type used to trigger. Enumeration: 'major': 1, 'all': 3, 'minor': 2.
                                     tyviewTPTriggerEvent 1.3.6.1.4.1.466.6.2.4.1.5 integer read-write
The event type used to trigger. Enumeration: 'alarm-on': 1, 'alarm-instance': 2.
                                     tyviewTPInstance 1.3.6.1.4.1.466.6.2.4.1.6 integer read-write
The alarm instance used to trigger.
                                     tyviewTPInterval 1.3.6.1.4.1.466.6.2.4.1.7 integer read-write
The alarm interval used to trigger.
                                     tyviewTPEventAction 1.3.6.1.4.1.466.6.2.4.1.8 displaystring read-write
The phone number dialed when triggered.
                                     tyviewTPDryContact 1.3.6.1.4.1.466.6.2.4.1.9 integer read-write
The type of Dry Contact when triggered. Enumeration: 'dry-contact-minor': 3, 'dry-contact-off': 1, 'dry-contact-major': 2.
                                     tyviewTPClearDryContact 1.3.6.1.4.1.466.6.2.4.1.10 integer read-write
Clear major/minor Dry Contact. Enumeration: 'clear-minor': 2, 'clear-major': 1.
                               dsucsuTrap 1.3.6.1.4.1.466.6.10.0
A dsucsuTrap trap signifies that the sending node had its `dsucsuAlarmType` variable modified.